Skip to Content
Last modified by Xiaoling on 2025/04/27 16:48
From version 74.9
edited by Xiaoling
on 2022/10/11 17:20
Change comment: There is no comment for this version
To version 51.2
edited by Xiaoling
on 2022/09/30 10:41
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -25,14 +25,10 @@
25 25  (((
26 26  In TrackerD, there are various sensors such as GPS, WiFi, BLE, Temperature, Humidity, Motion Detection, and Buzzer. User can use TrackerD for different tracking scenario.
27 27  
28 -(((
29 29  TrackerD is program friendly. Developers can use Arduino IDE to customize the software of TrackerD to fit their IoT solution.
30 -)))
31 31  
32 -(((
33 33  The LoRa wireless technology used in TrackerD allows the user to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional tracking services.
34 34  )))
35 -)))
36 36  
37 37  (((
38 38  TrackerD is equipped with a (% style="color:blue" %)**1000mAh Li-on rechargeable battery**(%%). Each TrackerD has a worldwide unique OTAA keys to join the LoRaWAN network.
... ... @@ -98,6 +98,7 @@
98 98  * Tracking: max: 38mA
99 99  
100 100  
97 +
101 101  == 1.3  Features ==
102 102  
103 103  
... ... @@ -104,7 +104,7 @@
104 104  * LoRaWAN 1.0.3 Class A
105 105  * ESP32 PICO D4
106 106  * SX1276/78 Wireless Chip
107 -* Arduino IDE Compatible
104 +* Arduino IDE Compatible
108 108  * Open source hardware / software
109 109  * Regular/ Real-time GPS,BLE,WIFI tracking
110 110  * Built-in3 axis accelerometer (LIS3DH)
... ... @@ -124,6 +124,7 @@
124 124  * Human tracking
125 125  
126 126  
124 +
127 127  = 2.1 Use TrackerD =
128 128  
129 129  
... ... @@ -151,10 +151,11 @@
151 151  
152 152  Each TrackerD is shipped with a sticker with the default device EUI as below:
153 153  
154 -
155 155  [[image:1664501677253-891.png]]
156 156  
157 157  
155 +
156 +
158 158  Input these keys to their LoRaWAN Server portal. Below is TTN V3 screen shot:
159 159  
160 160  
... ... @@ -186,185 +186,103 @@
186 186  (% style="color:blue" %)**Step 3:**(%%) TrackerD will auto join to the LoRaWAN network. After join success, TrackerD will start to upload message to IoT server.
187 187  
188 188  
188 +(% style="color:blue" %)**Positioning Mode(SMOD):**
189 189  
190 -== 2.3  Positioning Mode(SMOD) ==
190 +* **GPS ONLY(Factory Settings): **only get GPS location info.
191 +* **BLE ONLY: **Only obtain iBeacon info via BLE. Design for Indoor tracking.
192 +* **GPS/BLE Hybrid: **Combination for Indoor and Outdoor tracking.
191 191  
194 +User can switch modes by [[changing SMOD>>path:#Positioning_Mode]].
192 192  
193 -Users can set TrackerD to different Positioning Mode for different applications. Below mod are supported.
194 194  
195 -* (% style="color:#037691" %)**GPS ONLY(Factory Settings):    **(%%)only get and uplink GPS location info.
196 -* (% style="color:#037691" %)**BLE ONLY:              **(%%)Only obtain iBeacon info via BLE and uplink. Design for Indoor tracking.
197 -* (% style="color:#037691" %)**GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.Devices will try to search BLE iBeacon first. If device can't find the iBeacon, it will use GPS for positioning.
198 198  
199 -Users can switch modes by [[changing SMOD>>||anchor="H3.2.7SetPositioningMode"]].
198 +== 2.3 Uplink Payload ~-~-~-~-~-~-~-~-~-~-~-~-~-~- ==
200 200  
201 201  
201 +=== 2.3.1 Uplink FPORT~=5, Device Status ===
202 202  
203 -== 2.4  Uplink Payload ==
204 204  
205 205  
206 -=== 2.4.1 Uplink FPORT~=5, Device Status ===
205 +=== 2.3.2 Uplink FPORT~= , Realtime GNSS Positioning ===
207 207  
208 208  
209 -Uplink the device configures with FPORT=5. Once TrackerD Joined the network, it will uplink this message to the server. After the first uplink, TrackerD will uplink Device Status every 12 hours.
208 +The default uplink payload includes totally 11 bytes. (User can use AT+MOD=0 to enable the Temperature and humidity sensor to hum/tem info from accelerometer. When accelerometer info is enable, total payload will be 15 bytes, please note 15 bytes won't work on DR0 on US915/AU915 frequency band. )
210 210  
211 211  
212 -(% border="1.5" style="background-color:#ffffcc; color:green; width:520px" %)
213 -|=(% scope="row" style="width: 108px;" %)**Size(bytes)**|=(% style="width: 82px;" %)**1**|=(% style="width: 83px;" %)**2**|=(% style="width: 94px;" %)**1**|=(% style="width: 84px;" %)**1**|=(% style="width: 44px;" %)2|=(% style="width: 63px;" %)**2**|=(% style="width: 60px;" %)1
214 -|=(% style="width: 108px;" %)**Value**|(% style="width:82px" %)Sensor Model|(% style="width:83px" %)Firmware Version|(% style="width:94px" %)Frequency Band|(% style="width:84px" %)Sub-band|(% style="width:44px" %)BAT|(% style="width:63px" %)SMOD|(% style="width:60px" %)Status
211 +(% border="2" style="background-color:#ffffcc; color:green; width:537px" %)
212 +|(% style="width:69px" %)(((
213 +**Size**
215 215  
216 -[[image:1665301570342-765.png]]
215 +**(bytes)**
216 +)))|(% style="width:76px" %)4|(% style="width:87px" %)4|(% style="width:76px" %)2|(% style="width:52px" %)1|(% style="width:88px" %)(((
217 +2
217 217  
219 +(optional )
220 +)))|(% style="width:83px" %)(((
221 +2
218 218  
219 -(% style="color:#037691" %)**Example of Device Status:**(%%) 13014001FF0FA24002
223 +(optional)
224 +)))
225 +|(% style="width:69px" %)**Value**|(% style="width:76px" %)[[Latitude>>path:#Location]]|(% style="width:87px" %)[[Longitude>>path:#Location]]|(% style="width:76px" %)(((
226 +[[Alarm &>>path:#Alarm]]
220 220  
221 -(% style="color:#037691" %)**Sensor Model:** (%%) For TrackerD,this value is 0x13
228 +[[BAT>>path:#Alarm]]
229 +)))|(% style="width:52px" %)[[FLAG>>path:#Flag]]|(% style="width:88px" %)Hum|(% style="width:83px" %)[[Tem>>path:#Pitch]]
222 222  
223 -(% style="color:#037691" %)**Firmware Version: **(%%) 0x0140,Means:v1.4.0 version
224 224  
225 -(% style="color:#037691" %)**Frequency Band**:
226 226  
227 -*0x01: EU868
233 +[[image:1664501958445-288.png]]
228 228  
229 -*0x02: US915
230 230  
231 -*0x03: IN865
236 +**Alarm & BAT:**
232 232  
233 -*0x04: AU915
238 +(% border="2" style="background-color:#ffffcc; color:green; width:329px" %)
239 +|(% style="width:72px" %)**Size(bit)**|(% style="width:67px" %)1 bit|(% style="width:118px" %)1bit|(% style="width:63px" %)14 bits
240 +|(% style="width:72px" %)**Value**|(% style="width:67px" %)reserve|(% style="width:118px" %)Alarm Indicate|(% style="width:63px" %)[[BAT>>path:#BAT]] 
234 234  
235 -*0x05: KZ865
236 236  
237 -*0x06: RU864
238 238  
239 -*0x07: AS923
244 +**FLAG:**
240 240  
241 -*0x08: AS923-1
246 +(% border="2" style="background-color:#ffffcc; color:green; width:332px" %)
247 +|(% style="width:79px" %)**Size(bit)**|(% style="width:55px" %)2 bits|(% style="width:47px" %)1bit|(% style="width:140px" %)5 bits
248 +|(% style="width:79px" %)**Value**|(% style="width:55px" %)[[MOD>>path:#MD]]|(% style="width:47px" %)[[LON>>path:#LON]]|(% style="width:140px" %)Firmware version 
242 242  
243 -*0x09: AS923-2
244 244  
245 -*0x0a: AS923-3
251 +**Example: Payload: 0x02863D68 FAC29BAF 4B45 60 0202 011A  **
246 246  
247 -Sub- Band:value 0x00~~0x08(only forAU915,US915,Others are 0xFF)
248 248  
249 -(% style="color:#037691" %)**BAT:**(%%) shows the battery voltage for TrackerD.
254 +**Location info:**
250 250  
256 +* Latitude: 02863D68  ⇒  //if (0x//02863D68//& 0x80000000 = 0 )~://  //value = 02863D68 /1000000 = 42.351976//
257 +* Longitude: FAC29BAF  ⇒ //if (0x//FAC29BAF// & 0x80000000 = 1 )~://  //value = (0x//FAC29BAF// – 0x 100000000)/1000000 =//-87.9094//57//
251 251  
252 -(% style="color:#037691" %)**Ex1:**(%%) 0x0FA2 = 4002mV
253 253  
254 -Use can also get the Device Status uplink through the downlink command:
260 +**Important note:**
255 255  
256 -TrackerD Model：0x40
257 -
258 -(% border="1.5" style="background-color:#ffffcc; color:green; width:314px" %)
259 -|(% style="width:75px" %)**Size(bit)**|(% style="width:64px" %)2bits|(% style="width:88px" %)2bit|(% style="width:84px" %)4bit
260 -|(% style="width:75px" %)**Value**|(% style="width:64px" %)SMOD|(% style="width:88px" %)GPS_MOD|(% style="width:84px" %)BLE_MOD
261 -
262 -(% style="color:blue" %)**SMOD：**
263 -
264 -(% style="color:red" %)**1 :** (%%) GPS ONLY
265 -
266 -(% style="color:red" %)**2 :** (%%) BLE ONLY
267 -
268 -(% style="color:red" %)**3 :**  (%%) GPS/BLE Hybrid
269 -
270 -
271 -(% style="color:blue" %)**GPS MOD:**
272 -
273 -(% style="color:red" %)**0 : ** (%%) Enable uploading on-board Temperature and humidity values
274 -
275 -(% style="color:red" %)**1 :** (%%) Disable uploading on-board Temperature and humidity values
276 -
277 -
278 -(% style="color:blue" %)**BLE MOD:**
279 -
280 -(% style="color:red" %)**1: ** (%%) BLE Positioning with Strongest iBeacon
281 -
282 -TrackerD Status:  0x02
283 -
284 -(% border="1.5" style="background-color:#ffffcc; color:green; width:345px" %)
285 -|(% style="width:77px" %)**Size(bit)**|(% style="width:91px" %)1bits|(% style="width:48px" %)1bit|(% style="width:126px" %)1bit
286 -|(% style="width:77px" %)**Value**|(% style="width:91px" %)PNACKMD|(% style="width:48px" %)LON|(% style="width:126px" %)Transport** **Mode
287 -
288 -(% style="color:red" %)**0 : **(%%) Transport Mode
289 -
290 -(% style="color:red" %)**1 :  **(%%) AT+LON
291 -
292 -(% style="color:red" %)**2 : **(%%) Datalog Enable/Disable
293 -
294 -
295 -
296 -=== 2.4.2 Uplink FPORT~=2, Realtime GNSS Positioning + Temperature & Humidity ===
297 -
298 -
299 -User can use **AT+SMOD=1,0** to enable uploading on-board Temperature and humidity values, and the total payload will be 15 bytes, please note that 15 bytes won't work on DR0 on US915/AU915 frequency band.
300 -
301 -
302 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:480px" %)
303 -|=(% scope="row" style="width: 50px;" %)(((
304 -**Size(bytes)**
305 -)))|(% style="width:60px" %)4|(% style="width:70px" %)4|(% style="width:80px" %)2|(% style="width:73px" %)1|(% style="width:40px" %)(((
306 -2
307 -)))|(% style="width:87px" %)(((
308 -2
309 -)))
310 -|=(% style="width: 69px;" %)**Value**|(% style="width:76px" %)[[Latitude>>||anchor="HLocationinfo:"]]|(% style="width:87px" %)[[Longitude>>||anchor="HLocationinfo:"]]|(% style="width:76px" %)(((
311 -[[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
312 -)))|(% style="width:73px" %)[[FLAG>>||anchor="HFLAG:"]]|(% style="width:40px" %)[[Hum>>||anchor="HHum:"]]|(% style="width:87px" %)[[Tem>>||anchor="HTem:"]]
313 -
314 -[[image:1665301636888-168.png]]
315 -
316 -
317 -==== (% style="color:blue" %)**Alarm & BAT:**(%%) ====
318 -
319 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:250px" %)
320 -|=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)1 bit|(% style="width:80px" %)1bit|(% style="width:50px" %)14bits
321 -|=(% style="width: 72px;" %)**Value**|(% style="width:67px" %)reserve|(% style="width:118px" %)Alarm Indicate|(% style="width:63px" %)[[BAT>>||anchor="HBAT:"]] 
322 -
323 -
324 -
325 -==== (% style="color:blue" %)**FLAG:**(%%) ====
326 -
327 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:250px" %)
328 -|=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)2bits|(% style="width:50px" %)1bit
329 -|=(% style="width: 79px;" %)**Value**|(% style="width:55px" %)[[MOD>>||anchor="H3.2.7SetPositioningMode"]]|(% style="width:47px" %)[[LON>>||anchor="HLON:"]]
330 -
331 -**Example:** Payload: 0x02863D68 FAC29BAF 4B45 60 0202 011A 
332 -
333 -
334 -==== (% style="color:blue" %)**Location info:**(%%) ====
335 -
336 -* Latitude: 02863D68  ⇒  //if (0x//02863D68//& 0x80000000 = 0 )~://  //value = 02863D68 /1000000 = 42.351976//
337 -* Longitude: FAC29BAF  ⇒ //if (0x//FAC29BAF// & 0x80000000 = 1 )~://  //value = (0x//FAC29BAF// – 0x 100000000)/1000000 =//-87.9094//57//
338 -
339 -(% style="color:red" %)**Important note:**
340 -
341 341  1.  When power is low (<2.84v), GPS won't be able to get location info and GPS feature will be disabled and the location field will be filled with 0x0FFFFFFF, 0x0FFFFFFF.
342 342  
343 -2.  In this mode, the total payload will be 15 bytes, while US915/AU915 DR0 accepts only 11 bytes payload. In this case, the payload on server will be ignore and shows as below:
264 +2.  In firmware version v1.5, Roll & Pitch is disabled by default.
344 344  
266 +3.  When enable 9-axis motion sensor, the total payload will be 15 bytes, while US915/AU915 DR0 accept only 11 bytes payload. In this case, the payload on server will be ignore and shows as below:
345 345  
268 +
346 346  [[image:1664502116362-706.png]]
347 347  
348 348  
349 -3.  While GPS can't get location info after timeout(FTIME Parameter), the latitude and longitude will be filled with all 0x00:
350 350  
273 +4.  While GPS can't get location info after timeout(FTIME Parameter), the latitude and longitude will be filled with all 0x00:
274 +
351 351  [[image:1664502166010-515.png]]
352 352  
353 353  
354 354  
355 -==== (% style="color:blue" %)**Alarm:**(%%) ====
279 +* **Alarm**:  Example:  0x4B & 0x40 >> 6 = 0x01
280 +* **BAT**:  Example:  0x0CDD & 0x3FFF ⇒ 3293 (mV).
356 356  
357 -**Example: ** 0x4B & 0x40 >> 6 = 0x01
282 +The battery info shows the current voltage, for **TrackerD** version which powered by li-on battery. User can use below mapping to indicate the battery in percentage: \
358 358  
359 359  
360 -==== (% style="color:blue" %)**BAT:**(%%) ====
361 -
362 -**Example: ** 0x4B45 & 0x3FFF ⇒ 2885 (mV).
363 -
364 -(((
365 -The battery info shows the battery voltage, User can use the below mapping to indicate the battery in percentage: \
366 -)))
367 -
368 368  * > 4.0v :  80% ~~ 100%
369 369  * 3.85v ~~3.99v:  60% ~~ 80%
370 370  * 3.70v ~~ 3.84v:  40% ~~ 60%
... ... @@ -373,133 +373,84 @@
373 373  
374 374  
375 375  
376 -==== (% style="color:blue" %)**MOD:**(%%) ====
293 +* **LON: **Enable/Disable LED activity for uplink
377 377  
378 -**Set the format of GPS data uplink link：**
295 +0x00:  Disable LED indicator.
379 379  
380 -(% style="color:#037691" %)**0x00:** (%%) Enable uploading on-board Temperature and humidity values
381 -(% style="color:#037691" %)**0x01: ** (%%) Disable uploading on-board Temperature and humidity values
297 +0x01:  Enable LED indicator (Default Value)
382 382  
383 383  
384 -**Set the format of BLE data uplink link：**
300 +* **Hum**: 0202 = //if (0x0202 & 0x8000 = 0 ):  value =// 0x0202 / 100 = +514 ⇒ 51.4 degree
301 +* **//Tem//**//: 011A =if (0x011A & 0x8000 = 1 ):  value =( 0x011A - 0x10000)/10(dec) ⇒ -//28.2 degree
385 385  
386 -(% style="color:#037691" %)**0x01: ** (%%) BLE Positioning with Strongest iBeacon
387 387  
388 388  
389 -**Example: ** (0x60>>6)& 0x3f =1.
390 390  
391 391  
307 +=== 2.3.3 Uplink FPORT~= , History GNSS Positioning ===
392 392  
393 -==== (% style="color:blue" %)**LON:**(%%) ====
394 394  
395 -Enable/Disable LED activity for uplink
396 396  
397 -(((
398 -(% style="color:#037691" %)**0x00:**  (%%) Disable LED indicator.
399 -)))
311 +=== 2.3.4 BLE positioning Payload(Fport2) ===
400 400  
401 -(((
402 -(% style="color:#037691" %)**0x01:**  (%%) Enable LED indicator (Default Value)
403 -)))
404 404  
405 -**Example:** (0x60>>5) & 0x01=1.
314 +Different MODE has different payload:
406 406  
316 +**MODE=2**
407 407  
408 -==== (% style="color:blue" %)**Hum:**(%%) ====
318 +(% border="2" style="background-color:#ffffcc; color:green; width:620px" %)
319 +|(% style="width:70px" %)(((
320 +**Size**
409 409  
410 -0202 = //if (0x0202 & 0x8000 = 0 ):  value =// 0x0202 / 100 = +514 ⇒ 51.4 degree
322 +**(bytes)**
323 +)))|(% style="width:54px" %)16|(% style="width:72px" %)4|(% style="width:71px" %)4|(% style="width:145px" %)2|(% style="width:72px" %)4|(% style="width:76px" %)2|(% style="width:54px" %)1
324 +|(% style="width:70px" %)**Value**|(% style="width:54px" %)[[UUID>>path:#Location]]|(% style="width:72px" %)(((
325 +iBeacon
411 411  
327 +MAJOR
328 +)))|(% style="width:71px" %)(((
329 +iBeacon
412 412  
413 -==== (% style="color:blue" %)**Tem:**(%%) ====
331 +MINOR
332 +)))|(% style="width:145px" %)(((
333 +iBeacon Measured
414 414  
415 -011A =if (0x011A & 0x8000 = 1 ):  value =( 0x011A - 0x10000)/10(dec) ⇒ -//28.2 degree//
335 +Power
336 +)))|(% style="width:72px" %)(((
337 +iBeacon
416 416  
339 +RSSI
340 +)))|(% style="width:76px" %)(((
341 +[[Alarm &>>path:#Alarm]]
417 417  
343 +[[BAT>>path:#Alarm]]
344 +)))|(% style="width:54px" %)[[FLAG>>path:#Flag]]
418 418  
419 -=== 2.4.3  Uplink FPORT~=3, Realtime GNSS Positioning (Default Mode) ===
346 +[[image:1664502425687-834.png]]
420 420  
421 421  
422 -The default uplink payload includes totally 11 bytes. The payload is the first 11 bytes of Uplink FPORT=2, real-time GNSS positioning, (remove the temp and humidity)
349 +* **BAT**:  Ex1: 0x4B45 & 0x3FFF ⇒ 3901 (mV).
350 +* **MODE:   **Define the payload format.
351 +* **UUID:     **The uuid from the strongest iBeacon.
352 +* **MAJOR**:  The MAJOR from the strongest iBeacon.
353 +* **MINOR**:  The MAJOR from the strongest iBeacon.
354 +* **Measured** **Power**:  The Measured Power from the strongest iBeacon.
355 +* **RSSI**:  The RSSI from the strongest iBeacon.
423 423  
424 424  
425 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:480px" %)
426 -|=(% scope="row" style="width: 50px;" %)(((
427 -**Size(bytes)**
428 -)))|(% style="width:60px" %)4|(% style="width:70px" %)4|(% style="width:80px" %)2|(% style="width:73px" %)1
429 -|=(% style="width: 69px;" %)**Value**|(% style="width:76px" %)[[Latitude>>||anchor="HLocationinfo:"]]|(% style="width:87px" %)[[Longitude>>||anchor="HLocationinfo:"]]|(% style="width:76px" %)(((
430 -[[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
431 -)))|(% style="width:73px" %)[[FLAG>>||anchor="HFLAG:"]]
432 432  
433 -(% class="wikigeneratedid" %)
434 -[[image:1665301687277-443.png]]
435 435  
436 436  
361 +=== 2.3.5 Add Payload format in TTN V3 ===
437 437  
438 -=== 2.4.4  Uplink FPORT~=4, History GNSS Positioning ===
439 439  
440 -
441 -Set [[PNACKMD=1>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H4.13AutoSendNone-ACKmessages]], and TrackerD will wait for ACK for every uplink, when there is no LoRaWAN network, TrackerD will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
442 -
443 -
444 -(% style="color:red" %)**Note for this mode:**
445 -
446 -* a) TrackerD will do an ACK check for data records sending to make sure every data arrive server.
447 -* b) TrackerD will send data in (% style="color:blue" %)**CONFIRMED Mode**(%%) when PNACKMD=1, but TrackerD won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink, if TrackerD gets an ACK, TrackerD will consider there is a network connection and resend all NONE-ACK Messages.
448 -
449 -The payload is 15 bytes, as below.
450 -
451 -(% border="1.5" style="background-color:#ffffcc; color:green; width:520px" %)
452 -|=(% scope="row" %)(((
453 -**Size(bytes)**
454 -)))|4|4|2|1|1|1|1|1
455 -|=**Value**|Latitude|Longitude|Year|Month|Day|Hous|Min|Sen
456 -
457 -[[image:image-20221009160309-2.png]]
458 -
459 -
460 -
461 -=== 2.4.5  Uplink FPORT~=6, BLE Positioning with Strongest iBeacon ===
462 -
463 -
464 -(% border="1.5" cellspacing="3" style="background-color:#ffffcc; color:green; width:450px" %)
465 -|=(% scope="row" style="width: 60px;" %)(((
466 -**Size(bytes)**
467 -)))|(% style="width:30px" %)16|(% style="width:50px" %)4|(% style="width:50px" %)4|(% style="width:120px" %)2|(% style="width:50px" %)4|(% style="width:50px" %)2|(% style="width:30px" %)1
468 -|=(% style="width: 50px;" %)**Value**|(% style="width:44px" %)[[UUID>>||anchor="HLocationinfo:"]]|(% style="width:61px" %)(((
469 -iBeacon MAJOR
470 -)))|(% style="width:63px" %)(((
471 -iBeacon MINOR
472 -)))|(% style="width:71px" %)(((
473 -iBeacon Measured Power
474 -)))|(% style="width:50px" %)(((
475 -iBeacon RSSI
476 -)))|(% style="width:47px" %)(((
477 -[[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
478 -)))|(% style="width:15px" %)[[FLAG>>||anchor="HFLAG:"]]
479 -
480 -[[image:1664502425687-834.png]]
481 -
482 -
483 -* (% style="color:#037691" %)**BAT: ** (%%) Ex1: 0x4B45 & 0x3FFF ⇒ 3901 (mV).
484 -* (% style="color:#037691" %)**MODE:   **(%%)Define the payload format.
485 -* (% style="color:#037691" %)**UUID:     **(%%)The uuid from the strongest iBeacon.
486 -* (% style="color:#037691" %)**MAJOR:** (%%) The MAJOR from the strongest iBeacon.
487 -* (% style="color:#037691" %)**MINOR:**  (%%)The MAJOR from the strongest iBeacon.
488 -* (% style="color:#037691" %)**Measured Power: ** (%%) The Measured Power from the strongest iBeacon.
489 -* (% style="color:#037691" %)**RSSI:  ** (%%) The RSSI from the strongest iBeacon.
490 -
491 -
492 -=== 2.4.6  Add Payload format in TTN V3 ===
493 -
494 -
495 495  In TTN V3, use can add a custom payload so it shows friendly.
496 496  
497 -In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**
366 +In the page Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder
498 498  
499 499  
500 500  [[image:1664502649601-895.png]]
501 501  
502 -
503 503  Add the decoder from this link:
504 504  
505 505  
... ... @@ -509,16 +509,12 @@
509 509  
510 510  
511 511  
512 -== 2.5 Integrate with Datacake ==
380 +== 2.4 Integrate with Datacake ==
513 513  
514 514  
515 -(((
516 516  After TrackerD sends data to LoRaWAN server such as TTN, use can pass the data to Datacake and plot out, currently only support GPS plot.
517 -)))
518 518  
519 -(((
520 520  Instruction is here:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20Data%20Cake/#H7.Example~~-~~-AddTrackerDGPSTrackingInDataCake>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20Data%20Cake/#H7.Example--AddTrackerDGPSTrackingInDataCake]]
521 -)))
522 522  
523 523  
524 524  [[image:1664502695771-538.png]]
... ... @@ -525,16 +525,12 @@
525 525  
526 526  
527 527  
528 -== 2.6 Integrate with Tago ==
392 +== 2.5 Integrate with Tago ==
529 529  
530 530  
531 -(((
532 532  After TrackerD sends data to LoRaWAN server such as TTN, use can pass the data to Datacake and plot out, currently only support GPS plot.
533 -)))
534 534  
535 -(((
536 536  Instruction is here: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Tago.IO/#H3.A0Example-CreateTrackerD2FLGT92positioningwidget>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Tago.IO/#H3.A0Example-CreateTrackerD2FLGT92positioningwidget]]
537 -)))
538 538  
539 539  
540 540  [[image:1664502715371-321.png]]
... ... @@ -541,97 +541,72 @@
541 541  
542 542  
543 543  
544 -== 2.7  Datalog Feature ==
404 +== 2.6 Alarm Mode ==
545 545  
546 546  
547 -total 273 entries,by default disable
407 +User can push the **RED button** by more than 5 seconds to enter Alarm Mode.
548 548  
549 549  
550 -Example use case.
410 +Once enter Alarm mode, the **GREEN LED** will flash 3 times, the buzzer will alarm for 5 seconds, then TrackerD will immediately send a packet without location info and then send a data packet with GPS positioning information. After that, the device will send 60 packets at 1-minute intervals. The Alarm flag in the payload will be set for the next 60 packets unless exit alert mode.
551 551  
552 -[[image:image-20221009234703-2.png||height="328" width="899"]]
553 553  
554 -
555 -[[image:image-20221009234629-1.png||height="390" width="577"]]
556 -
557 -
558 -
559 -== 2.8 Alarm Mode ==
560 -
561 -
562 -(((
563 -User can push the (% style="color:red" %)**RED button**(%%) by more than 5 seconds to enter Alarm Mode.
564 -)))
565 -
566 -
567 -(((
568 -Once enter Alarm mode, the (% style="color:green" %)**GREEN LED**(%%) will flash 3 times, the buzzer will alarm for 5 seconds, then TrackerD will immediately send a packet without location info and then send a data packet with GPS positioning information. After that, the device will send 60 packets at 1-minute intervals. The Alarm flag in the payload will be set for the next 60 packets unless exit alert mode.
569 -)))
570 -
571 -
572 -(((
573 573  Two ways to exit alarm mode:
574 -)))
575 575  
576 576  * Server send a downlink command to exit.
577 577  * User fast press the RED button 10 times.
578 578  
579 -(((
580 -When exit alarm mode, (% style="color:red" %)**RED LED**(%%) will light up for 5 seconds, indicating that the alarm mode is exited. And the alert flag will be set to false.
581 -)))
418 +When exit alarm mode, **RED LED** will light up for 5 seconds, indicating that the alarm mode is exited. And the alert flag will be set to false.
582 582  
583 583  
584 584  
585 -== 2.9 Transport Mode ==
422 +== 2.7 Sports Mode ~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-- ==
586 586  
587 587  
588 -In Transport Mode, TrackerD will check if there is motion. If there is no motion, device will send uplinks every 20 minutes. If there is motion, device will send uplink every 5 minutes.
589 589  
426 +== 2.8 LED Status ==
590 590  
591 591  
592 -== 2.10 LED Status ==
429 +(% border="2" style="background-color:#ffffcc; color:green; width:636px" %)
430 +|(% style="width:157px" %)**Event**|(% style="width:271px" %)**Action**|(% style="width:202px" %)**AT+LON to control on/off**
431 +|(% style="width:157px" %)**Power On**|(% style="width:271px" %)**BLUE, RED , Green** flash once|(% style="width:202px" %)N/A
432 +|(% style="width:157px" %)**Join request**|(% style="width:271px" %)**Green** led fast blink once (200ms)|(% style="width:202px" %)Yes
433 +|(% style="width:157px" %)**Join Success**|(% style="width:271px" %)**Green** led on 5 second|(% style="width:202px" %)N/A
434 +|(% style="width:157px" %)**Fixing Location**|(% style="width:271px" %)**BLUE **blinks 200ms per second|(% style="width:202px" %)Yes
435 +|(% style="width:157px" %)**Fixed and uplink**|(% style="width:271px" %)**GREEN **blinks twice (200ms per blink)|(% style="width:202px" %)Yes
436 +|(% style="width:157px" %)**Fail Fix and uplink**|(% style="width:271px" %)**RED **blinks twice (200ms per blink)|(% style="width:202px" %)Yes
437 +|(% style="width:157px" %)**Enter Alarm mode**|(% style="width:271px" %)**RED **on for 3 seconds|(% style="width:202px" %)Yes
438 +|(% style="width:157px" %)**Uplink under Alarm**|(% style="width:271px" %)**RED **on for 1 second|(% style="width:202px" %)Yes
439 +|(% style="width:157px" %)**Exit Alarm**|(% style="width:271px" %)**BLUE **led on 5 second|(% style="width:202px" %)Yes
440 +|(% style="width:157px" %)**Get Downlink**|(% style="width:271px" %)**GREEN** led on 1 second|(% style="width:202px" %)Yes
441 +|(% style="width:157px" %)**Movement Detect**|(% style="width:271px" %)**RED **on 500ms|(% style="width:202px" %)N/A
593 593  
594 594  
595 -(% border="1.5" style="background-color:#ffffcc; color:green; width:500px" %)
596 -|=(% style="width: 150px;" %)**Event**|=(% style="width: 200px;" %)**Action**|=(% style="width: 150px;" %)**AT+LON to control on/off**
597 -|(% style="width:157px" %)**Power On**|(% style="width:271px" %)(% style="color:blue" %)**BLUE, **(% style="color:red" %)**RED , **(% style="color:green" %)**Green** flash once|(% style="width:202px" %)N/A
598 -|(% style="width:157px" %)**Join request**|(% style="width:271px" %)(% style="color:green" %)**Green** (%%)led fast blink once (200ms)|(% style="width:202px" %)Yes
599 -|(% style="width:157px" %)**Join Success**|(% style="width:271px" %)(% style="color:green" %)**Green**(%%) led on 5 second|(% style="width:202px" %)N/A
600 -|(% style="width:157px" %)**Fixing Location**|(% style="width:271px" %)(% style="color:blue" %)**BLUE **(%%)blinks 200ms per second|(% style="width:202px" %)Yes
601 -|(% style="width:157px" %)**Fixed and uplink**|(% style="width:271px" %)(% style="color:green" %)**GREEN ***(%%)***blinks twice (200ms per blink)**|(% style="width:202px" %)Yes
602 -|(% style="width:157px" %)**Fail Fix and uplink**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)blinks twice (200ms per blink)|(% style="width:202px" %)Yes
603 -|(% style="width:157px" %)**Enter Alarm mode**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)on for 3 seconds|(% style="width:202px" %)Yes
604 -|(% style="width:157px" %)**Uplink under Alarm**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)on for 1 second|(% style="width:202px" %)Yes
605 -|(% style="width:157px" %)**Exit Alarm**|(% style="width:271px" %)(% style="color:blue" %)**BLUE **(%%)led on 5 second|(% style="width:202px" %)Yes
606 -|(% style="width:157px" %)**Get Downlink**|(% style="width:271px" %)(% style="color:green" %)**GREEN**(%%) led on 1 second|(% style="width:202px" %)Yes
607 -|(% style="width:157px" %)**Movement Detect**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)led on 500ms|(% style="width:202px" %)N/A
608 608  
609 609  
446 +== 2.9 Button Function ==
610 610  
611 -== 2.11 Button Function ==
612 612  
449 +**RESET button:**
613 613  
614 -(% style="color:blue" %)**RESET button:**
615 -
616 616  [[image:1664502835802-546.png]]
617 617  
618 618  Push this button will reboot the device. Device will exit alarm mode and re-join to LoRaWAN server.
619 619  
620 620  
621 -(% style="color:red" %)**RED button:**
456 +**RED button:**
622 622  
623 623  [[image:1664502854406-763.png]]
624 624  
625 625  
626 -(% border="1.5" style="background-color:#ffffcc; color:green; width:520px" %)
627 -|=(% style="width: 100px;" %)**Function**|=(% style="width: 210px;" %)**Action**|=(% style="width: 210px;" %)**Description**
628 -|(% style="width:135px" %)Send Alarm|(% style="width:220px" %)Keep Pressing (% style="color:red" %)**RED**(%%) button for more than 5 seconds|(% style="width:265px" %)Enter Alarm Mode.  See [[Alarm Mode>>||anchor="H2.6AlarmMode"]]
629 -|(% style="width:135px" %)Exit Alarm Mode|(% style="width:220px" %)Fast press the (% style="color:red" %)**RED** (%%)button 10 times|(% style="width:265px" %)Exit Alarm Mode
461 +(% border="2" style="background-color:#ffffcc; color:green; width:627px" %)
462 +|(% style="width:135px" %)**Function**|(% style="width:220px" %)**Action**|(% style="width:265px" %)**Description**
463 +|(% style="width:135px" %)Send Alarm|(% style="width:220px" %)Keep Pressing **RED** button for more than 5 seconds|(% style="width:265px" %)Enter Alarm Mode.  See [[Alarm Mode>>path:#Alarm_Mode]]
464 +|(% style="width:135px" %)Exit Alarm Mode|(% style="width:220px" %)Fast press the **RED** button 10 times|(% style="width:265px" %)Exit Alarm Mode
630 630  |(% style="width:135px" %)Enter Deep Sleep Mode|(% style="width:220px" %)Press and hold the button for 10 seconds, then quickly press the device 3 times to enter deep sleep|(% style="width:265px" %)This is the mode ship out from factory. CPU will be complete in sleep mode and no LoRa activity, only use before deploy.
631 631  
632 632  
633 633  
634 -== 2.12 USB Port Function ==
469 +== 2.10 USB Port Function ==
635 635  
636 636  
637 637  The USB interface of TrackerD has below functions:
... ... @@ -638,16 +638,18 @@
638 638  
639 639  * Power on the device
640 640  * Recharge the battery
641 -* [[Configure Device>>||anchor="H3.ConfigureTrackerDviaATcommandorLoRaWANdownlink"]]
642 -* [[Upgrade Firmware>>||anchor="H5.UploadFirmware"]]
476 +* [[Configure Device>>path:#AT_Command]]
477 +* [[Upgrade Firmware>>path:#upgrade_image]]
643 643  
644 644  
480 +
481 +
645 645  = 3. Configure TrackerD via AT command or LoRaWAN downlink =
646 646  
647 647  
648 648  User can configure TrackerD via AT Command or LoRaWAN Downlink.
649 649  
650 -LoRaWAN Downlink instruction for different platforms:  [[IoT LoRaWAN Server>>doc:Main.WebHome]]
487 +LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>url:http://wiki.dragino.com/xwiki/bin/view/Main/]]
651 651  
652 652  
653 653  
... ... @@ -660,7 +660,7 @@
660 660  [[image:1664502999401-486.png]]
661 661  
662 662  
663 -In PC, User needs to set serial tool baud rate to (% style="color:green" %)**115200**(%%) to access serial console for TrackerD. TrackerD will output system info once power on and user will be able to send AT commands:
500 +In PC, User needs to set serial tool baud rate to **115200** to access serial console for TrackerD. TrackerD will output system info once power on and user will be able to send AT commands:
664 664  
665 665  
666 666  [[image:1664503022490-662.png]]
... ... @@ -683,16 +683,16 @@
683 683  
684 684  Set device uplink interval.
685 685  
686 -* (% style="color:blue" %)**AT Command:**
523 +* AT Command:
687 687  
688 -(% style="color:#037691" %)**AT+TDC=xxx **
525 +AT+TDC=xxx
689 689  
690 690  Example:  AT+TDC=300000. Means set interval to 5 minutes(300 seconds)
691 691  
692 692  
693 -* (% style="color:blue" %)**Downlink Payload (prefix 0x01):**
530 +* Downlink Payload (prefix 0x01):
694 694  
695 -(% style="color:#037691" %)**0x01 00 01 2C**  (%%) ~/~/  Same as AT+TDC=300000
532 +0x01 00 01 2C     ~/~/  Same as AT+TDC=300000
696 696  
697 697  
698 698  
... ... @@ -701,34 +701,34 @@
701 701  
702 702  Set alarm packet transmit interval
703 703  
704 -* (% style="color:blue" %)**AT Command:**
541 +* AT Command:
705 705  
706 -(% style="color:#037691" %)**AT+ATDC=xx. **
543 +AT+ATDC=xx.
707 707  
708 708  Example:  AT+ATDC=60000  **~-~->    ** Set Alarm Packet Interval to 60 seconds. TrackerD will send every 60 seconds in Alarm mode, Default Value: 60000
709 709  
710 710  
711 -* (% style="color:blue" %)**Downlink Payload (prefix 0xB1):**
548 +* Downlink Payload (prefix 0xB1):
712 712  
713 -(% style="color:#037691" %)**0xB1 00 00 3C ** (%%) ~/~/  Same as AT+ATDC=60000
550 +0xB1 00 00 3C  ~/~/  Same as AT+ATDC=60000
714 714  
715 715  
716 716  
717 -=== 3.2.3 Set Transport Mode Packet transmission interval ===
554 +=== 3.2.3 Set Sports Mode Packet transmission interval ===
718 718  
719 719  
720 -Set Transport Mode packet transmit interval
557 +Set sports packet transmit interval
721 721  
722 -* (% style="color:blue" %)**AT Command:**
559 +* AT Command:
723 723  
724 -(% style="color:#037691" %)**AT+MTDC=xx. **
561 +AT+MTDC=xx.
725 725  
726 -Example:  AT+MTDC=300000  **~-~->    ** Set Transport Mode Packet Interval to 300 seconds. TrackerD will send every 300 seconds in Transport mode, Default Value: 300000
563 + Example:  AT+MTDC=300000  **~-~->    ** Set Sports Mode Packet Interval to 300 seconds. TrackerD will send every 300 seconds in Sports mode, Default Value: 300000
727 727  
728 728  
729 -* (% style="color:blue" %)**Downlink Payload (prefix 0x03):**
566 +* Downlink Payload (prefix 0x03):
730 730  
731 -(% style="color:#037691" %)**0x03 00 01 2C**  (%%) ~/~/  Same as AT+ MTDC=3000000
568 +0x03 00 01 2C  ~/~/  Same as AT+ MTDC=3000000
732 732  
733 733  
734 734  
... ... @@ -737,47 +737,50 @@
737 737  
738 738  Server send downlink command to exit Alarm mode
739 739  
740 -* (% style="color:blue" %)**AT Command: No AT Command**
577 +* AT Command:
741 741  
742 -* (% style="color:blue" %)**Downlink Payload (prefix 0x02):**
579 +No AT Command
743 743  
744 -(% style="color:#037691" %)**0x02 01**    (%%) ~/~/  Exit Alarm Mode
745 745  
582 +* Downlink Payload (prefix 0x02):
746 746  
584 +0x02 01  ~/~/  Exit Alarm Mode
747 747  
586 +
587 +
748 748  === 3.2.5 Disable/Enable LED flash ===
749 749  
750 750  
751 751  Disable/Enable LED for position, downlink and uplink
752 752  
753 -* (% style="color:blue" %)**AT Command:**
593 +* AT Command:
754 754  
755 -(% style="color:#037691" %)**AT+LON=xx.  (Disable (0), Enable (1), default:1)**
595 +AT+LON=xx.  (Disable (0), Enable (1), default:1)
756 756  
757 -Example: AT+LON=0  **~-~-> ** Disable LED for position, downlink and uplink.
597 + Example: AT+LON=0  **~-~-> ** Disable LED for position, downlink and uplink.
758 758  
759 759  
760 -* (% style="color:blue" %)**Downlink Payload (prefix 0xAE):**
600 +* Downlink Payload (prefix 0xAE):
761 761  
762 -(% style="color:#037691" %)**0xAE 00 ** (%%) ~/~/  Same as AT+LON=0
602 +0xAE 00  ~/~/  Same as AT+LON=0
763 763  
764 764  
765 765  
766 -=== 3.2.6 Disable/Enable Transport Mode ===
606 +=== 3.2.6 Disable/Enable movement detect (Debug Only) ===
767 767  
768 768  
769 -Users can use this feature to enable/disable Transport Mode.
609 +User can use this feature to check and set thread hole of movement detect
770 770  
771 -* (% style="color:blue" %)**AT Command:**
611 +* AT Command:
772 772  
773 -(% style="color:#037691" %)**AT+INTWK=xx.  (Disable (0), Enable (1), default:0)**
613 +AT+INTWK=xx.  (Disable (0), Enable (1), default:0)
774 774  
775 -Example:  AT+ INTWK =1  **~-~->   ** Enable Transport Mode.
615 + Example:  AT+ INTWK =1  **~-~->   ** Enable detect movement.
776 776  
777 777  
778 -* (% style="color:blue" %)**Downlink Payload (prefix 0xAF):**
618 +* Downlink Payload (prefix 0xAF):
779 779  
780 -(% style="color:#037691" %)**0xAF 01 ** (%%) ~/~/  Same as AT+ INTWK =1
620 +0xAF 01  ~/~/  Same as AT+ INTWK =1
781 781  
782 782  
783 783  
... ... @@ -784,41 +784,38 @@
784 784  === 3.2.7 Set Positioning Mode ===
785 785  
786 786  
787 -SMOD define the how TrackerD scan and uplink data:
627 +SMOD define the how TrackerD scan and uplink date.
788 788  
629 +GPS室外定位模式：  设备默认模式，设备入网后会发送device当前模式下的信息，随后立即定位发送数据包（默认是3分钟定位，超过将发送无效数据），如果出现意外情况下，快速按键3下，将会发出报警消息（默认每分钟发送一次）。GPS还有一种logdata模式，在断网的情况下将数据存储下来，等到有网的时候，一次将数据以每10秒上报。
789 789  
790 -* (% style="color:blue" %)**AT Command:**
631 +BLE室内定位模式：  设备入网后会发送device当前模式下的信息，随后立即定位发送数据包（默认是5秒，超过将发送无效数据），如果出现意外情况下，快速按键3下，将会发出报警消息（默认每3分钟发送一次）。
791 791  
792 -(% style="color:#037691" %)**AT+SMOD=aa,bb,cc**
633 +GPS和BLE混动模式：设备入网后会发送device当前模式下的信息，随后立即判断是否在室内，如果是就进行BLE定位，不是就GPS定位。如果出现意外情况下，快速按键3下，将会发出报警消息（默认每分钟发送一次）。
793 793  
794 -(% style="color:#037691" %)** aa:**
635 +运动模式：  设备入网后会发送device当前模式下的信息，随后发送GPS定位数据，设备判断是否在运动，没有运动传感器没有检测到动作，立即进入静止状态（默认20分钟），如果产生运动，将每5分钟发送一次数据，再第五分钟后检测设备有误运动，无将切换到静止状态，有立即发送数据。
795 795  
796 -* (% style="color:red" %)**1: GPS ONLY(Factory Settings):    **(%%)only get and uplink GPS location info.
797 -* (% style="color:red" %)**2: BLE ONLY:              **(%%)Only obtain iBeacon info via BLE and uplink. Design for Indoor tracking.
798 -* (% style="color:red" %)**3: GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.Devices will try to search BLE iBeacon first. If device can't find the iBeacon, it will use GPS for positioning.
799 799  
800 -(% style="color:#037691" %)**bb:**
801 801  
802 -* (% style="color:red" %)**0 :  **(%%)GPS+ BAT+ State+Tem&Hum
803 -* (% style="color:red" %)**1 :**(%%)  GPS +BAT State
639 +* AT Command:
804 804  
805 -(% style="color:#037691" %)**cc:   **
641 +AT+SMOD=xx.
806 806  
807 -* (% style="color:red" %)**1 : **(%%) (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State  
808 808  
809 -(% style="color:blue" %)**Example:**
644 + **Example:**
810 810  
811 - AT+ SMOD =1,0 ,0 ~-~->  GPS+ BAT+ State+Tem&Hum
812 - AT+ SMOD =1,1,0 ~-~->  GPS +BAT State
813 - AT+ SMOD =2,0,1 ~-~->  (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State
646 + AT+ SMOD =1,0  **~-~-> ** GPS+ BAT+ State+Tem&Hum
814 814  
648 + AT+ SMOD =1,1    **~-~->**  GPS +BAT State
815 815  
816 -* (% style="color:blue" %)**Downlink Payload (prefix 0xA5):**
650 + AT+ SMOD =2,3    **~-~->**  (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State。
817 817  
818 -(% style="color:#037691" %)**0xA5 01 00 00**    (%%) ~/~/  Same as AT+ SMOD =1,0,0
819 819  
653 +* Downlink Payload (prefix 0xA5):
820 820  
655 +0xA5 01 00  ~/~/  Same as AT+ SMOD =1,0
821 821  
657 +
658 +
822 822  === 3.2.8 Set MAX GPS position time ===
823 823  
824 824  
... ... @@ -828,20 +828,20 @@
828 828  If AT+FTIME=0. The GPS module will be always powered and positioning. This will highly increase the power consumption (up to 50mA). When AT+FTIME=0, it will improve fix accuracy and shorten the acquire time for next uplink.
829 829  
830 830  
831 -* (% style="color:blue" %)**AT Command:**
668 +* AT Command:
832 832  
833 -(% style="color:#037691" %)**AT+FTIME=xx**  (%%) **~-~-> ** Set to use xx as max fix time.
670 +AT+FTIME=xx  **~-~-> ** Set to use xx as max fix time.
834 834  
835 -**Example:**  AT+FTIME=150
672 +Example:  AT+FTIME=150
836 836  
837 837  
838 -* (% style="color:blue" %)**Downlink Payload (prefix 0xAA):**
675 +* Downlink Payload (prefix 0xAA):
839 839  
840 -(% style="color:#037691" %)**0xAA 00 96 ** (%%) ~/~/  Set AT+FTIME=150
677 +0xAA 00 96  ~/~/  Set AT+FTIME=150
841 841  
842 842  
843 843  
844 -=== 3.2.9 Set PDOP value for GPS fix accuracy ===
681 +=== 3.3.9 Set PDOP value for GPS fix accuracy ===
845 845  
846 846  
847 847  PDOP(Position Dilution of Precision) filter, TrackerD will only accept GPS data with a lower PDOP value than pre-configure PDOP value. If device can't get a valid GPS packet within FTIME timeout, it will use the GPS data with lowest PDOP value to server.
... ... @@ -850,26 +850,25 @@
850 850  A GPS packet with lower PDOP has higher accuracy. PDOP default value is 2.0
851 851  
852 852  
853 -* (% style="color:blue" %)**AT Command:**
690 +* AT Command:
854 854  
855 -(% style="color:#037691" %)**AT+PDOP=2.5 ** (%%) **~-~->  ** Set PDOP to 2.5
692 +AT+PDOP=2.5  **~-~->  ** Set PDOP to 2.5
856 856  
857 857  
858 -* (% style="color:blue" %)**Downlink Payload (prefix 0xAD):**
695 +* Downlink Payload (prefix 0xAD):
859 859  
860 -(% style="color:#037691" %)**0xAD 00 0A**   (%%) ~/~/  Set AT+PDOP=1  (0x0A / 10 =1)
697 +0xAD 00 0A  ~/~/  Set AT+PDOP=1  (0x0A / 10 =1)
861 861  
862 -(% style="color:#037691" %)**0xAD 00 19**   (%%) ~/~/  Set AT+PDOP=2.5    (0x19 / 10 =2.5)
699 +0xAD 00 19  ~/~/  Set AT+PDOP=2.5    (0x19 / 10 =2.5)
863 863  
864 -(% style="color:#037691" %)**0xAD 00 46**    (%%) ~/~/  Set AT+PDOP=7  (0x46 / 10 =7)
701 +0xAD 00 46  ~/~/  Set AT+PDOP=7  (0x46 / 10 =7)
865 865  
866 866  
867 -
868 868  Disable/Enable the confirmation mode
869 869  
870 -* (% style="color:blue" %)**AT Command:**
706 +* AT Command:
871 871  
872 -(% style="color:#037691" %)**AT+CFM=xx**
708 +AT+CFM=xx.
873 873  
874 874  
875 875  **~ Example:**
... ... @@ -879,33 +879,12 @@
879 879   AT+ CFM=1    **~-~->  ** Enable confirmation
880 880  
881 881  
882 -* (% style="color:blue" %)**Downlink Payload (prefix 0x05):**
718 +* Downlink Payload (prefix 0x05):
883 883  
884 -(% style="color:#037691" %)**0x05 01 **(%%) ~/~/  Same as AT+ SMOD =1
720 +0x05 01  ~/~/  Same as AT+ SMOD =1
885 885  
886 886  
887 887  
888 -=== 3.2.10  Auto Send None-ACK messages ===
889 -
890 -
891 -TrackerD will wait for ACK for each uplink, If TrackerD doesn't get ACK from the IoT server, it will consider the message doesn't arrive server and store it. TrackerD keeps sending messages in normal periodically. Once TrackerD gets ACK from a server, it will consider the network is ok and start to send the not-arrive message.
892 -
893 -
894 -* (% style="color:blue" %)**AT Command: AT+PNACKMD**
895 -
896 -The default factory setting is 0.
897 -
898 -
899 -**Command Example Function Response:**
900 -
901 -(% style="color:#037691" %)**AT+PNACKMD=1**  (%%) ~/~/  Poll None-ACK message OK
902 -
903 -
904 -* (% style="color:blue" %)**Downlink Command: 0x34**
905 -
906 -Example: 0x3401  ~/~/  Same as AT+PNACKMD=1
907 -
908 -
909 909  = 4. Setting for Different Scenarios =
910 910  
911 911  
... ... @@ -934,9 +934,11 @@
934 934  After installation of the driver and plug in TrackerD, user should be able to see com port in PC's device manager.
935 935  
936 936  
937 -(% style="color:blue" %)**Step3:  **(%%)Download and Install Flash Tool:  [[https:~~/~~/www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools>>url:https://www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools]]
752 +(% style="color:blue" %)**Step3：**(%%) Download and Install Flash Tool:
938 938  
754 +[[https:~~/~~/www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools>>url:https://www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools]]
939 939  
756 +
940 940  (% style="color:blue" %)**Step4:** (%%) Run Flash Download Tool and configure chip type to ESP32
941 941  
942 942  
... ... @@ -948,7 +948,7 @@
948 948  
949 949  (% style="color:blue" %)**Step5:** (%%) Select the firmware file (.bin format), com port and proper SPI configure. Clink Start. Bin file location:
950 950  
951 -[[https:~~/~~/github.com/dragino/TrackerD/releases>>https://github.com/dragino/TrackerD/releases]]
768 +[[https:~~/~~/www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0>>url:https://www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0]]
952 952  
953 953  
954 954  Users need to use below files:
... ... @@ -977,23 +977,25 @@
977 977  === 6.1.1 Set up ARDUINO compile environment ===
978 978  
979 979  
980 -* **Download the latest Arduino software (IDE) from the Arduino official website:  [[https:~~/~~/www.arduino.cc/en/Main/Software>>url:https://www.arduino.cc/en/Main/Software]]**
797 +* Download the latest Arduino software (IDE) from the Arduino official website:  [[https:~~/~~/www.arduino.cc/en/Main/Software>>url:https://www.arduino.cc/en/Main/Software]]
981 981  
982 -Install IDE on PC, open and click (% style="color:#037691" %)**File ~-~-> Preference**,(%%) add the following URL:  [[https:~~/~~/dl.espressif.com/dl/package_esp32_index.json>>url:https://links.jianshu.com/go?to=https%3A%2F%2Fdl.espressif.com%2Fdl%2Fpackage_esp32_index.json]]
799 +Install IDE on PC, open and click **File ~-~-> Preference**, add the following URL:  [[https:~~/~~/dl.espressif.com/dl/package_esp32_index.json>>url:https://links.jianshu.com/go?to=https%3A%2F%2Fdl.espressif.com%2Fdl%2Fpackage_esp32_index.json]]
983 983  
984 984  
985 985  [[image:1664503635019-941.png]]
986 986  
987 987  
805 +* Go to tools ~-~-> Boards ~-~-> Boards Manager, find the esp32 information and install it.
988 988  
989 -* (% style="color:#037691" %)**Go to tools ~-~-> Boards ~-~-> Boards Manager**,(%%) **find the esp32 information and install it.**
990 990  
808 +
991 991  [[image:1664503715811-892.png]]
992 992  
993 993  
994 994  
995 -* **Download the latest TrackerD from the dragino github: [[https:~~/~~/github.com/dragino/TrackerD>>url:https://github.com/dragino/TrackerD]]**
813 +* Download the latest TrackerD from the dragino github: [[https:~~/~~/github.com/dragino/TrackerD>>url:https://github.com/dragino/TrackerD]]
996 996  
815 +
997 997  Put the Library in the TrackerD directory into the libraries file in the Arduino directory:
998 998  
999 999  
... ... @@ -1004,19 +1004,19 @@
1004 1004  == 6.2 Source Code ==
1005 1005  
1006 1006  
1007 -* (% style="color:blue" %)**Open the example in the TrackerD file, please select the correct port in the IDE, as shown below:**
826 +* Open the example in the TrackerD file, please select the correct port in the IDE, as shown below:
1008 1008  
1009 1009  [[image:1664503794261-827.png]]
1010 1010  
1011 1011  
1012 1012  
1013 -* (% style="color:blue" %)**Click to upload**
832 +* Click to upload
1014 1014  
1015 1015  [[image:1664503808294-336.png]]
1016 1016  
1017 1017  
1018 1018  
1019 -* (% style="color:blue" %)**Check the result, if the upload is successful, as shown below, open the serial port to view the data**
838 +* Check the result, if the upload is successful, as shown below, open the serial port to view the data
1020 1020  
1021 1021  [[image:1664503824081-592.png]] [[image:1664503831430-500.png]]
1022 1022  
... ... @@ -1028,7 +1028,7 @@
1028 1028  == 7.1 How to change the LoRa Frequency Bands/Region? ==
1029 1029  
1030 1030  
1031 -User can follow the introduction for [[how to upgrade image>>||anchor="H5.UploadFirmware"]]. When download the images, choose the required image file for download.
850 +User can follow the introduction for [[how to upgrade image>>path:#upgrade_image]]. When download the images, choose the required image file for download.
1032 1032  
1033 1033  
1034 1034  
... ... @@ -1039,8 +1039,8 @@
1039 1039  
1040 1040  
1041 1041  
1042 -(% border="1.5" cellspacing="3" style="background-color:#ffffcc; color:green; width:314px" %)
1043 -|=(% style="width: 118px;" %)**Pin**|=(% style="width: 67px;" %)**Color**|=(% style="width: 123px;" %)**USB Pin**
861 +(% border="2" style="background-color:#ffffcc; color:green; width:314px" %)
862 +|(% style="width:118px" %)**Pin**|(% style="width:67px" %)**Color**|(% style="width:123px" %)**USB Pin**
1044 1044  |(% style="width:118px" %)A4,B4,A9,B9|(% style="width:67px" %)Red|(% style="width:123px" %)VCC
1045 1045  |(% style="width:118px" %)A7,B7|(% style="width:67px" %)White|(% style="width:123px" %)D- (N/A)
1046 1046  |(% style="width:118px" %)A6,B6|(% style="width:67px" %)Green|(% style="width:123px" %)D+(N/A)
... ... @@ -1052,6 +1052,8 @@
1052 1052  
1053 1053  
1054 1054  
874 +
875 +
1055 1055  = 8.  Order Info =
1056 1056  
1057 1057  
... ... @@ -1068,27 +1068,34 @@
1068 1068  * (% style="color:red" %)**US915**(%%): Default frequency band US915
1069 1069  
1070 1070  
892 +
893 +
894 +
1071 1071  = 9.  Packing Info =
1072 1072  
1073 1073  
1074 -(% style="color:#037691" %)**Package Includes**:
898 +**Package Includes**:
1075 1075  
1076 1076  * TrackerD LoRaWAN GPS/BLE Tracker x 1
1077 1077  * USB recharge & program cable x 1
1078 1078  
1079 -(% style="color:#037691" %)**Dimensions and Weight**:
903 +**Dimensions and Weight**:
1080 1080  
1081 1081  * Device Size: 85 x 48 x 15 cm
1082 1082  * Weight: 50g
1083 1083  
1084 1084  
909 +
910 +
1085 1085  = 10. Support =
1086 1086  
1087 1087  
1088 1088  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1089 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]].
915 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]]
1090 1090  
1091 1091  
918 +
919 +
1092 1092  = 11.  Reference =
1093 1093  
1094 1094  
... ... @@ -1095,5 +1095,3 @@
1095 1095  * [[**Firmware in Bin format**>>https://www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0]]
1096 1096  * **[[Source Code>>https://github.com/dragino/TrackerD]] **
1097 1097  * [[**Hardware Source**>>https://www.dropbox.com/sh/orwoy6cecb89m4e/AAD37sRuUrvKsHgAJxuVTkB5a?dl=0]]
1098 -
1099 -
1665301570342-765.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.6 KB
Content
1665301636888-168.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.6 KB
Content
1665301687277-443.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -22.6 KB
Content
1665301786397-168.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -22.6 KB
Content
image-20221006181316-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -17.7 KB
Content
image-20221006181357-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -88.0 KB
Content
image-20221009160220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -46.4 KB
Content
image-20221009160309-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -57.2 KB
Content
image-20221009234629-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -222.9 KB
Content
image-20221009234703-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -136.4 KB
Content