Skip to Content
Last modified by Xiaoling on 2025/04/27 16:48
From version 74.8
edited by Xiaoling
on 2022/10/11 17:08
Change comment: There is no comment for this version
To version 51.22
edited by Xiaoling
on 2022/09/30 14:51
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -61,11 +61,13 @@
61 61  * EEPROM: 520 KB
62 62  * Clock Speed: 32Mhz
63 63  
64 +
64 64  (% style="color:blue" %)**Common DC Characteristics:**
65 65  
66 66  * Supply Voltage: 5V via USB port or Internal li-on battery
67 67  * Operating Temperature: -40 ~~ 60°C
68 68  
70 +
69 69  (% style="color:blue" %)**LoRa Spec:**
70 70  
71 71  * Frequency Range,
... ... @@ -87,10 +87,12 @@
87 87  * Packet engine up to 256 bytes with CRC.
88 88  * LoRaWAN 1.0.3 Specification
89 89  
92 +
90 90  (% style="color:blue" %)**Battery:**
91 91  
92 92  * 1000mA Li-on Battery power (for model TrackerD)
93 93  
97 +
94 94  (% style="color:blue" %)**Power Consumption**
95 95  
96 96  * Sleeping Mode: 200uA
... ... @@ -105,7 +105,7 @@
105 105  * LoRaWAN 1.0.3 Class A
106 106  * ESP32 PICO D4
107 107  * SX1276/78 Wireless Chip
108 -* Arduino IDE Compatible
112 +** Arduino IDE Compatible
109 109  * Open source hardware / software
110 110  * Regular/ Real-time GPS,BLE,WIFI tracking
111 111  * Built-in3 axis accelerometer (LIS3DH)
... ... @@ -189,186 +189,97 @@
189 189  (% style="color:blue" %)**Step 3:**(%%) TrackerD will auto join to the LoRaWAN network. After join success, TrackerD will start to upload message to IoT server.
190 190  
191 191  
196 +(% style="color:blue" %)**Positioning Mode(SMOD):**
192 192  
193 -== 2.3  Positioning Mode(SMOD) ==
198 +* (% style="color:#037691" %)**GPS ONLY(Factory Settings):    **(%%)only get GPS location info.
199 +* (% style="color:#037691" %)**BLE ONLY:              **(%%)Only obtain iBeacon info via BLE. Design for Indoor tracking.
200 +* (% style="color:#037691" %)**GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.
194 194  
202 +User can switch modes by [[changing SMOD>>||anchor="H3.2.7SetPositioningMode"]].
195 195  
196 -Users can set TrackerD to different Positioning Mode for different applications. Below mod are supported.
197 197  
198 -* (% style="color:#037691" %)**GPS ONLY(Factory Settings):    **(%%)only get and uplink GPS location info.
199 -* (% style="color:#037691" %)**BLE ONLY:              **(%%)Only obtain iBeacon info via BLE and uplink. Design for Indoor tracking.
200 -* (% style="color:#037691" %)**GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.Devices will try to search BLE iBeacon first. If device can't find the iBeacon, it will use GPS for positioning.
201 201  
202 -Users can switch modes by [[changing SMOD>>||anchor="H3.2.7SetPositioningMode"]].
206 +== 2.3 Uplink Payload ==
203 203  
204 204  
209 +=== 2.3.1 Uplink FPORT~=5, Device Status ===
205 205  
206 -== 2.4  Uplink Payload ==
207 207  
208 208  
209 -=== 2.4.1 Uplink FPORT~=5, Device Status ===
213 +=== 2.3.2 Uplink FPORT~= , Realtime GNSS Positioning ===
210 210  
211 211  
212 -Uplink the device configures with FPORT=5. Once TrackerD Joined the network, it will uplink this message to the server. After the first uplink, TrackerD will uplink Device Status every 12 hours.
216 +The default uplink payload includes totally 11 bytes. (User can use AT+MOD=0 to enable the Temperature and humidity sensor to hum/tem info from accelerometer. When accelerometer info is enable, total payload will be 15 bytes, please note 15 bytes won't work on DR0 on US915/AU915 frequency band. )
213 213  
214 214  
215 -(% border="1.5" style="background-color:#ffffcc; color:green; width:520px" %)
216 -|=(% scope="row" style="width: 108px;" %)**Size(bytes)**|=(% style="width: 82px;" %)**1**|=(% style="width: 83px;" %)**2**|=(% style="width: 94px;" %)**1**|=(% style="width: 84px;" %)**1**|=(% style="width: 44px;" %)2|=(% style="width: 63px;" %)**2**|=(% style="width: 60px;" %)1
217 -|=(% style="width: 108px;" %)**Value**|(% style="width:82px" %)Sensor Model|(% style="width:83px" %)Firmware Version|(% style="width:94px" %)Frequency Band|(% style="width:84px" %)Sub-band|(% style="width:44px" %)BAT|(% style="width:63px" %)SMOD|(% style="width:60px" %)Status
218 -
219 -[[image:1665301570342-765.png]]
220 -
221 -
222 -(% style="color:#037691" %)**Example of Device Status:**(%%) 13014001FF0FA24002
223 -
224 -(% style="color:#037691" %)**Sensor Model:** (%%) For TrackerD,this value is 0x13
225 -
226 -(% style="color:#037691" %)**Firmware Version: **(%%) 0x0140,Means:v1.4.0 version
227 -
228 -(% style="color:#037691" %)**Frequency Band**:
229 -
230 -*0x01: EU868
231 -
232 -*0x02: US915
233 -
234 -*0x03: IN865
235 -
236 -*0x04: AU915
237 -
238 -*0x05: KZ865
239 -
240 -*0x06: RU864
241 -
242 -*0x07: AS923
243 -
244 -*0x08: AS923-1
245 -
246 -*0x09: AS923-2
247 -
248 -*0x0a: AS923-3
249 -
250 -Sub- Band:value 0x00~~0x08(only forAU915,US915,Others are 0xFF)
251 -
252 -(% style="color:#037691" %)**BAT:**(%%) shows the battery voltage for TrackerD.
253 -
254 -
255 -(% style="color:#037691" %)**Ex1:**(%%) 0x0FA2 = 4002mV
256 -
257 -Use can also get the Device Status uplink through the downlink command:
258 -
259 -TrackerD Model：0x40
260 -
261 -(% border="1.5" style="background-color:#ffffcc; color:green; width:314px" %)
262 -|(% style="width:75px" %)**Size(bit)**|(% style="width:64px" %)2bits|(% style="width:88px" %)2bit|(% style="width:84px" %)4bit
263 -|(% style="width:75px" %)**Value**|(% style="width:64px" %)SMOD|(% style="width:88px" %)GPS_MOD|(% style="width:84px" %)BLE_MOD
264 -
265 -(% style="color:blue" %)**SMOD：**
266 -
267 -(% style="color:red" %)**1 :** (%%) GPS ONLY
268 -
269 -(% style="color:red" %)**2 :** (%%) BLE ONLY
270 -
271 -(% style="color:red" %)**3 :**  (%%) GPS/BLE Hybrid
272 -
273 -
274 -(% style="color:blue" %)**GPS MOD:**
275 -
276 -(% style="color:red" %)**0 : ** (%%) Enable uploading on-board Temperature and humidity values
277 -
278 -(% style="color:red" %)**1 :** (%%) Disable uploading on-board Temperature and humidity values
279 -
280 -
281 -(% style="color:blue" %)**BLE MOD:**
282 -
283 -(% style="color:red" %)**1: ** (%%) BLE Positioning with Strongest iBeacon
284 -
285 -TrackerD Status:  0x02
286 -
287 -(% border="1.5" style="background-color:#ffffcc; color:green; width:345px" %)
288 -|(% style="width:77px" %)**Size(bit)**|(% style="width:91px" %)1bits|(% style="width:48px" %)1bit|(% style="width:126px" %)1bit
289 -|(% style="width:77px" %)**Value**|(% style="width:91px" %)PNACKMD|(% style="width:48px" %)LON|(% style="width:126px" %)Transport** **Mode
290 -
291 -(% style="color:red" %)**0 : **(%%) Transport Mode
292 -
293 -(% style="color:red" %)**1 :  **(%%) AT+LON
294 -
295 -(% style="color:red" %)**2 : **(%%) Datalog Enable/Disable
296 -
297 -
298 -
299 -=== 2.4.2 Uplink FPORT~=2, Realtime GNSS Positioning + Temperature & Humidity ===
300 -
301 -
302 -User can use **AT+SMOD=1,0** to enable uploading on-board Temperature and humidity values, and the total payload will be 15 bytes, please note that 15 bytes won't work on DR0 on US915/AU915 frequency band.
303 -
304 -
305 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:480px" %)
306 -|=(% scope="row" style="width: 50px;" %)(((
219 +(% border="1.5" cellspacing="3" style="background-color:#ffffcc; color:green; width:520px" %)
220 +|=(% scope="row" style="width: 80px;" %)(((
307 307  **Size(bytes)**
308 -)))|(% style="width:60px" %)4|(% style="width:70px" %)4|(% style="width:80px" %)2|(% style="width:73px" %)1|(% style="width:40px" %)(((
309 -2
310 -)))|(% style="width:87px" %)(((
311 -2
222 +)))|(% style="width:60px" %)4|(% style="width:70px" %)4|(% style="width:80px" %)2|(% style="width:50px" %)1|(% style="width:80px" %)(((
223 +2(optional )
224 +)))|(% style="width:80px" %)(((
225 +2(optional)
312 312  )))
313 313  |=(% style="width: 69px;" %)**Value**|(% style="width:76px" %)[[Latitude>>||anchor="HLocationinfo:"]]|(% style="width:87px" %)[[Longitude>>||anchor="HLocationinfo:"]]|(% style="width:76px" %)(((
314 314  [[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
315 -)))|(% style="width:73px" %)[[FLAG>>||anchor="HFLAG:"]]|(% style="width:40px" %)[[Hum>>||anchor="HHum:"]]|(% style="width:87px" %)[[Tem>>||anchor="HTem:"]]
229 +)))|(% style="width:52px" %)[[FLAG>>||anchor="HFLAG:"]]|(% style="width:88px" %)[[Hum>>||anchor="HHum:"]]|(% style="width:83px" %)[[Tem>>||anchor="HTem:"]]
316 316  
317 -[[image:1665301636888-168.png]]
231 +[[image:1664501958445-288.png]]
318 318  
319 319  
320 -==== (% style="color:blue" %)**Alarm & BAT:**(%%) ====
234 +==== (% style="color:blue" %)Alarm & BAT:(%%) ====
321 321  
322 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:250px" %)
323 -|=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)1 bit|(% style="width:80px" %)1bit|(% style="width:50px" %)14bits
236 +(% border="1.5" cellspacing="3" style="background-color:#ffffcc; color:green; width:329px" %)
237 +|=(% scope="row" style="width: 72px;" %)**Size(bit)**|(% style="width:67px" %)1 bit|(% style="width:118px" %)1bit|(% style="width:63px" %)14 bits
324 324  |=(% style="width: 72px;" %)**Value**|(% style="width:67px" %)reserve|(% style="width:118px" %)Alarm Indicate|(% style="width:63px" %)[[BAT>>||anchor="HBAT:"]] 
325 325  
240 +==== (% style="color:blue" %)FLAG:(%%) ====
326 326  
242 +(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:332px" %)
243 +|=(% scope="row" style="width: 79px;" %)**Size(bit)**|(% style="width:55px" %)2 bits|(% style="width:47px" %)1bit|(% style="width:140px" %)5 bits
244 +|=(% style="width: 79px;" %)**Value**|(% style="width:55px" %)[[MOD>>||anchor="H2.3.4BLEpositioningPayload28Fport229"]]|(% style="width:47px" %)[[LON>>||anchor="HLON:"]]|(% style="width:140px" %)Firmware version 
327 327  
328 -==== (% style="color:blue" %)**FLAG:**(%%) ====
329 -
330 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:250px" %)
331 -|=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)2bits|(% style="width:50px" %)1bit
332 -|=(% style="width: 79px;" %)**Value**|(% style="width:55px" %)[[MOD>>||anchor="H3.2.7SetPositioningMode"]]|(% style="width:47px" %)[[LON>>||anchor="HLON:"]]
333 -
334 334  **Example:** Payload: 0x02863D68 FAC29BAF 4B45 60 0202 011A 
335 335  
336 336  
337 -==== (% style="color:blue" %)**Location info:**(%%) ====
249 +==== (% style="color:blue" %)Location info:(%%) ====
338 338  
339 339  * Latitude: 02863D68  ⇒  //if (0x//02863D68//& 0x80000000 = 0 )~://  //value = 02863D68 /1000000 = 42.351976//
340 340  * Longitude: FAC29BAF  ⇒ //if (0x//FAC29BAF// & 0x80000000 = 1 )~://  //value = (0x//FAC29BAF// – 0x 100000000)/1000000 =//-87.9094//57//
341 341  
342 -
343 343  (% style="color:red" %)**Important note:**
344 344  
345 345  1.  When power is low (<2.84v), GPS won't be able to get location info and GPS feature will be disabled and the location field will be filled with 0x0FFFFFFF, 0x0FFFFFFF.
346 346  
347 -2.  In this mode, the total payload will be 15 bytes, while US915/AU915 DR0 accepts only 11 bytes payload. In this case, the payload on server will be ignore and shows as below:
258 +2.  In firmware version v1.5, Roll & Pitch is disabled by default.
348 348  
260 +3.  When enable 9-axis motion sensor, the total payload will be 15 bytes, while US915/AU915 DR0 accept only 11 bytes payload. In this case, the payload on server will be ignore and shows as below:
349 349  
262 +
350 350  [[image:1664502116362-706.png]]
351 351  
352 352  
353 -3.  While GPS can't get location info after timeout(FTIME Parameter), the latitude and longitude will be filled with all 0x00:
354 354  
267 +4.  While GPS can't get location info after timeout(FTIME Parameter), the latitude and longitude will be filled with all 0x00:
268 +
355 355  [[image:1664502166010-515.png]]
356 356  
357 357  
358 358  
359 -==== (% style="color:blue" %)**Alarm:**(%%) ====
273 +==== (% style="color:blue" %)Alarm:(%%) ====
360 360  
275 +
361 361  Example:  0x4B & 0x40 >> 6 = 0x01
362 362  
363 363  
364 -==== (% style="color:blue" %)**BAT:**(%%) ====
279 +==== (% style="color:blue" %)BAT:(%%) ====
365 365  
366 -Example: 0x4B45 & 0x3FFF ⇒ 2885 (mV).
367 367  
368 -(((
369 -The battery info shows the battery voltage, User can use the below mapping to indicate the battery in percentage: \
370 -)))
282 +Example:  0x0CDD & 0x3FFF ⇒ 3293 (mV).
371 371  
284 +The battery info shows the current voltage, for (% style="color:blue" %)**TrackerD**(%%) version which powered by li-on battery. User can use below mapping to indicate the battery in percentage: \
285 +
286 +
372 372  * > 4.0v :  80% ~~ 100%
373 373  * 3.85v ~~3.99v:  60% ~~ 80%
374 374  * 3.70v ~~ 3.84v:  40% ~~ 60%
... ... @@ -375,99 +375,46 @@
375 375  * 3.40v ~~ 3.69v:  20% ~~ 40%
376 376  * < 3.39v:  0~~20%
377 377  
293 +==== (% style="color:blue" %)LON:(%%) ====
378 378  
379 -
380 -==== (% style="color:blue" %)**MOD:**(%%) ====
381 -
382 -mod = (0x60>>6)& 0x3f;
383 -
384 -**Set the format of GPS data uplink link：**
385 -
386 -(% style="color:#037691" %)**0x00:** (%%) Enable uploading on-board Temperature and humidity values
387 -(% style="color:#037691" %)**0x01: ** (%%) Disable uploading on-board Temperature and humidity values
388 -
389 -
390 -**Set the format of BLE data uplink link：**
391 -
392 -(% style="color:#037691" %)**0x01: ** (%%) BLE Positioning with Strongest iBeacon
393 -
394 -
395 -==== (% style="color:blue" %)**LON:**(%%) ====
396 -
397 -lon=(0x60>>5) & 0x01;
398 -
295 +
399 399  Enable/Disable LED activity for uplink
400 400  
401 -(((
402 -(% style="color:#037691" %)**0x00:**  (%%) Disable LED indicator.
403 -)))
298 +0x00:  Disable LED indicator.
404 404  
405 -(((
406 -(% style="color:#037691" %)**0x01:**  (%%) Enable LED indicator (Default Value)
407 -)))
300 +0x01:  Enable LED indicator (Default Value)
408 408  
409 409  
410 -==== (% style="color:blue" %)**Hum:**(%%) ====
303 +==== (% style="color:blue" %)Hum:(%%) ====
411 411  
412 412  0202 = //if (0x0202 & 0x8000 = 0 ):  value =// 0x0202 / 100 = +514 ⇒ 51.4 degree
413 413  
414 414  
415 -==== (% style="color:blue" %)**Tem:**(%%) ====
308 +==== (% style="color:blue" %)Tem:(%%) ====
416 416  
417 417  011A =if (0x011A & 0x8000 = 1 ):  value =( 0x011A - 0x10000)/10(dec) ⇒ -//28.2 degree//
418 418  
419 419  
420 420  
421 -=== 2.4.3  Uplink FPORT~=3, Realtime GNSS Positioning (Default Mode) ===
422 422  
315 +=== 2.3.3 Uplink FPORT~= , History GNSS Positioning ===
423 423  
424 -The default uplink payload includes totally 11 bytes. The payload is the first 11 bytes of Uplink FPORT=2, real-time GNSS positioning, (remove the temp and humidity)
425 425  
426 426  
427 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:480px" %)
428 -|=(% scope="row" style="width: 50px;" %)(((
429 -**Size(bytes)**
430 -)))|(% style="width:60px" %)4|(% style="width:70px" %)4|(% style="width:80px" %)2|(% style="width:73px" %)1
431 -|=(% style="width: 69px;" %)**Value**|(% style="width:76px" %)[[Latitude>>||anchor="HLocationinfo:"]]|(% style="width:87px" %)[[Longitude>>||anchor="HLocationinfo:"]]|(% style="width:76px" %)(((
432 -[[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
433 -)))|(% style="width:73px" %)[[FLAG>>||anchor="HFLAG:"]]
319 +=== 2.3.4 BLE positioning Payload(Fport2) ===
434 434  
435 -(% class="wikigeneratedid" %)
436 -[[image:1665301687277-443.png]]
437 437  
322 +Different MODE has different payload:
438 438  
324 +**MODE=2**
439 439  
440 -=== 2.4.4  Uplink FPORT~=4, History GNSS Positioning ===
326 +(% border="2" style="background-color:#ffffcc; color:green; width:491px" %)
327 +|(% style="width:70px" %)(((
328 +**Size**
441 441  
442 -
443 -Set [[PNACKMD=1>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H4.13AutoSendNone-ACKmessages]], and TrackerD will wait for ACK for every uplink, when there is no LoRaWAN network, TrackerD will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
444 -
445 -
446 -(% style="color:red" %)**Note for this mode:**
447 -
448 -* a) TrackerD will do an ACK check for data records sending to make sure every data arrive server.
449 -* b) TrackerD will send data in (% style="color:blue" %)**CONFIRMED Mode**(%%) when PNACKMD=1, but TrackerD won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink, if TrackerD gets an ACK, TrackerD will consider there is a network connection and resend all NONE-ACK Messages.
450 -
451 -The payload is 15 bytes, as below.
452 -
453 -(% border="1.5" style="background-color:#ffffcc; color:green; width:520px" %)
454 -|=(% scope="row" %)(((
455 -**Size(bytes)**
456 -)))|4|4|2|1|1|1|1|1
457 -|=**Value**|Latitude|Longitude|Year|Month|Day|Hous|Min|Sen
458 -
459 -[[image:image-20221009160309-2.png]]
460 -
461 -
462 -
463 -=== 2.4.5  Uplink FPORT~=6, BLE Positioning with Strongest iBeacon ===
464 -
465 -
466 -(% border="1.5" cellspacing="3" style="background-color:#ffffcc; color:green; width:450px" %)
467 -|=(% scope="row" style="width: 60px;" %)(((
468 -**Size(bytes)**
469 -)))|(% style="width:30px" %)16|(% style="width:50px" %)4|(% style="width:50px" %)4|(% style="width:120px" %)2|(% style="width:50px" %)4|(% style="width:50px" %)2|(% style="width:30px" %)1
470 -|=(% style="width: 50px;" %)**Value**|(% style="width:44px" %)[[UUID>>||anchor="HLocationinfo:"]]|(% style="width:61px" %)(((
330 +**(bytes)**
331 +)))|(% style="width:44px" %)16|(% style="width:61px" %)4|(% style="width:63px" %)4|(% style="width:71px" %)2|(% style="width:50px" %)4|(% style="width:47px" %)2|(% style="width:15px" %)1
332 +|(% style="width:70px" %)**Value**|(% style="width:44px" %)[[UUID>>||anchor="HLocationinfo:"]]|(% style="width:61px" %)(((
471 471  iBeacon MAJOR
472 472  )))|(% style="width:63px" %)(((
473 473  iBeacon MINOR
... ... @@ -490,11 +490,9 @@
490 490  * (% style="color:#037691" %)**Measured Power: ** (%%) The Measured Power from the strongest iBeacon.
491 491  * (% style="color:#037691" %)**RSSI:  ** (%%) The RSSI from the strongest iBeacon.
492 492  
355 +=== 2.3.5 Add Payload format in TTN V3 ===
493 493  
494 494  
495 -=== 2.4.6  Add Payload format in TTN V3 ===
496 -
497 -
498 498  In TTN V3, use can add a custom payload so it shows friendly.
499 499  
500 500  In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**
... ... @@ -512,16 +512,12 @@
512 512  
513 513  
514 514  
515 -== 2.5 Integrate with Datacake ==
375 +== 2.4 Integrate with Datacake ==
516 516  
517 517  
518 -(((
519 519  After TrackerD sends data to LoRaWAN server such as TTN, use can pass the data to Datacake and plot out, currently only support GPS plot.
520 -)))
521 521  
522 -(((
523 523  Instruction is here:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20Data%20Cake/#H7.Example~~-~~-AddTrackerDGPSTrackingInDataCake>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20Data%20Cake/#H7.Example--AddTrackerDGPSTrackingInDataCake]]
524 -)))
525 525  
526 526  
527 527  [[image:1664502695771-538.png]]
... ... @@ -528,16 +528,12 @@
528 528  
529 529  
530 530  
531 -== 2.6 Integrate with Tago ==
387 +== 2.5 Integrate with Tago ==
532 532  
533 533  
534 -(((
535 535  After TrackerD sends data to LoRaWAN server such as TTN, use can pass the data to Datacake and plot out, currently only support GPS plot.
536 -)))
537 537  
538 -(((
539 539  Instruction is here: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Tago.IO/#H3.A0Example-CreateTrackerD2FLGT92positioningwidget>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Tago.IO/#H3.A0Example-CreateTrackerD2FLGT92positioningwidget]]
540 -)))
541 541  
542 542  
543 543  [[image:1664502715371-321.png]]
... ... @@ -544,59 +544,33 @@
544 544  
545 545  
546 546  
547 -== 2.7  Datalog Feature ==
399 +== 2.6 Alarm Mode ==
548 548  
549 549  
550 -total 273 entries,by default disable
551 -
552 -
553 -Example use case.
554 -
555 -[[image:image-20221009234703-2.png||height="328" width="899"]]
556 -
557 -
558 -[[image:image-20221009234629-1.png||height="390" width="577"]]
559 -
560 -
561 -
562 -== 2.8 Alarm Mode ==
563 -
564 -
565 -(((
566 566  User can push the (% style="color:red" %)**RED button**(%%) by more than 5 seconds to enter Alarm Mode.
567 -)))
568 568  
569 569  
570 -(((
571 571  Once enter Alarm mode, the (% style="color:green" %)**GREEN LED**(%%) will flash 3 times, the buzzer will alarm for 5 seconds, then TrackerD will immediately send a packet without location info and then send a data packet with GPS positioning information. After that, the device will send 60 packets at 1-minute intervals. The Alarm flag in the payload will be set for the next 60 packets unless exit alert mode.
572 -)))
573 573  
574 574  
575 -(((
576 576  Two ways to exit alarm mode:
577 -)))
578 578  
579 579  * Server send a downlink command to exit.
580 580  * User fast press the RED button 10 times.
581 581  
582 -(((
583 583  When exit alarm mode, (% style="color:red" %)**RED LED**(%%) will light up for 5 seconds, indicating that the alarm mode is exited. And the alert flag will be set to false.
584 -)))
585 585  
586 586  
587 587  
588 -== 2.9 Transport Mode ==
417 +== 2.7 Sports Mode ~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-- ==
589 589  
590 590  
591 -In Transport Mode, TrackerD will check if there is motion. If there is no motion, device will send uplinks every 20 minutes. If there is motion, device will send uplink every 5 minutes.
592 592  
421 +== 2.8 LED Status ==
593 593  
594 594  
595 -== 2.10 LED Status ==
596 -
597 -
598 -(% border="1.5" style="background-color:#ffffcc; color:green; width:500px" %)
599 -|=(% style="width: 150px;" %)**Event**|=(% style="width: 200px;" %)**Action**|=(% style="width: 150px;" %)**AT+LON to control on/off**
424 +(% border="2" style="background-color:#ffffcc; color:green; width:636px" %)
425 +|(% style="width:157px" %)**Event**|(% style="width:271px" %)**Action**|(% style="width:202px" %)**AT+LON to control on/off**
600 600  |(% style="width:157px" %)**Power On**|(% style="width:271px" %)(% style="color:blue" %)**BLUE, **(% style="color:red" %)**RED , **(% style="color:green" %)**Green** flash once|(% style="width:202px" %)N/A
601 601  |(% style="width:157px" %)**Join request**|(% style="width:271px" %)(% style="color:green" %)**Green** (%%)led fast blink once (200ms)|(% style="width:202px" %)Yes
602 602  |(% style="width:157px" %)**Join Success**|(% style="width:271px" %)(% style="color:green" %)**Green**(%%) led on 5 second|(% style="width:202px" %)N/A
... ... @@ -609,14 +609,11 @@
609 609  |(% style="width:157px" %)**Get Downlink**|(% style="width:271px" %)(% style="color:green" %)**GREEN**(%%) led on 1 second|(% style="width:202px" %)Yes
610 610  |(% style="width:157px" %)**Movement Detect**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)led on 500ms|(% style="width:202px" %)N/A
611 611  
438 +== 2.9 Button Function ==
612 612  
613 613  
441 +(% style="color:green" %)**RESET button:**
614 614  
615 -== 2.11 Button Function ==
616 -
617 -
618 -(% style="color:blue" %)**RESET button:**
619 -
620 620  [[image:1664502835802-546.png]]
621 621  
622 622  Push this button will reboot the device. Device will exit alarm mode and re-join to LoRaWAN server.
... ... @@ -627,18 +627,16 @@
627 627  [[image:1664502854406-763.png]]
628 628  
629 629  
630 -(% border="1.5" style="background-color:#ffffcc; color:green; width:520px" %)
631 -|=(% style="width: 100px;" %)**Function**|=(% style="width: 210px;" %)**Action**|=(% style="width: 210px;" %)**Description**
453 +(% border="2" style="background-color:#ffffcc; color:green; width:627px" %)
454 +|(% style="width:135px" %)**Function**|(% style="width:220px" %)**Action**|(% style="width:265px" %)**Description**
632 632  |(% style="width:135px" %)Send Alarm|(% style="width:220px" %)Keep Pressing (% style="color:red" %)**RED**(%%) button for more than 5 seconds|(% style="width:265px" %)Enter Alarm Mode.  See [[Alarm Mode>>||anchor="H2.6AlarmMode"]]
633 633  |(% style="width:135px" %)Exit Alarm Mode|(% style="width:220px" %)Fast press the (% style="color:red" %)**RED** (%%)button 10 times|(% style="width:265px" %)Exit Alarm Mode
634 634  |(% style="width:135px" %)Enter Deep Sleep Mode|(% style="width:220px" %)Press and hold the button for 10 seconds, then quickly press the device 3 times to enter deep sleep|(% style="width:265px" %)This is the mode ship out from factory. CPU will be complete in sleep mode and no LoRa activity, only use before deploy.
635 635  
636 636  
460 +== 2.10 USB Port Function ==
637 637  
638 638  
639 -== 2.12 USB Port Function ==
640 -
641 -
642 642  The USB interface of TrackerD has below functions:
643 643  
644 644  * Power on the device
... ... @@ -647,7 +647,6 @@
647 647  * [[Upgrade Firmware>>||anchor="H5.UploadFirmware"]]
648 648  
649 649  
650 -
651 651  = 3. Configure TrackerD via AT command or LoRaWAN downlink =
652 652  
653 653  
... ... @@ -720,16 +720,16 @@
720 720  
721 721  
722 722  
723 -=== 3.2.3 Set Transport Mode Packet transmission interval ===
543 +=== 3.2.3 Set Sports Mode Packet transmission interval ===
724 724  
725 725  
726 -Set Transport Mode packet transmit interval
546 +Set sports packet transmit interval
727 727  
728 728  * (% style="color:blue" %)**AT Command:**
729 729  
730 730  (% style="color:#037691" %)**AT+MTDC=xx. **
731 731  
732 -Example:  AT+MTDC=300000  **~-~->    ** Set Transport Mode Packet Interval to 300 seconds. TrackerD will send every 300 seconds in Transport mode, Default Value: 300000
552 + Example:  AT+MTDC=300000  **~-~->    ** Set Sports Mode Packet Interval to 300 seconds. TrackerD will send every 300 seconds in Sports mode, Default Value: 300000
733 733  
734 734  
735 735  * (% style="color:blue" %)**Downlink Payload (prefix 0x03):**
... ... @@ -760,7 +760,7 @@
760 760  
761 761  (% style="color:#037691" %)**AT+LON=xx.  (Disable (0), Enable (1), default:1)**
762 762  
763 -Example: AT+LON=0  **~-~-> ** Disable LED for position, downlink and uplink.
583 + Example: AT+LON=0  **~-~-> ** Disable LED for position, downlink and uplink.
764 764  
765 765  
766 766  * (% style="color:blue" %)**Downlink Payload (prefix 0xAE):**
... ... @@ -769,16 +769,16 @@
769 769  
770 770  
771 771  
772 -=== 3.2.6 Disable/Enable Transport Mode ===
592 +=== 3.2.6 Disable/Enable movement detect (Debug Only) ===
773 773  
774 774  
775 -Users can use this feature to enable/disable Transport Mode.
595 +User can use this feature to check and set thread hole of movement detect
776 776  
777 777  * (% style="color:blue" %)**AT Command:**
778 778  
779 779  (% style="color:#037691" %)**AT+INTWK=xx.  (Disable (0), Enable (1), default:0)**
780 780  
781 -Example:  AT+ INTWK =1  **~-~->   ** Enable Transport Mode.
601 + Example:  AT+ INTWK =1  **~-~->   ** Enable detect movement.
782 782  
783 783  
784 784  * (% style="color:blue" %)**Downlink Payload (prefix 0xAF):**
... ... @@ -790,38 +790,35 @@
790 790  === 3.2.7 Set Positioning Mode ===
791 791  
792 792  
793 -SMOD define the how TrackerD scan and uplink data:
613 +SMOD define the how TrackerD scan and uplink date.
794 794  
615 +GPS室外定位模式：  设备默认模式，设备入网后会发送device当前模式下的信息，随后立即定位发送数据包（默认是3分钟定位，超过将发送无效数据），如果出现意外情况下，快速按键3下，将会发出报警消息（默认每分钟发送一次）。GPS还有一种logdata模式，在断网的情况下将数据存储下来，等到有网的时候，一次将数据以每10秒上报。
795 795  
796 -* (% style="color:blue" %)**AT Command:**
617 +BLE室内定位模式：  设备入网后会发送device当前模式下的信息，随后立即定位发送数据包（默认是5秒，超过将发送无效数据），如果出现意外情况下，快速按键3下，将会发出报警消息（默认每3分钟发送一次）。
797 797  
798 -(% style="color:#037691" %)**AT+SMOD=aa,bb,cc**
619 +GPS和BLE混动模式：设备入网后会发送device当前模式下的信息，随后立即判断是否在室内，如果是就进行BLE定位，不是就GPS定位。如果出现意外情况下，快速按键3下，将会发出报警消息（默认每分钟发送一次）。
799 799  
800 -(% style="color:#037691" %)** aa:**
621 +运动模式：  设备入网后会发送device当前模式下的信息，随后发送GPS定位数据，设备判断是否在运动，没有运动传感器没有检测到动作，立即进入静止状态（默认20分钟），如果产生运动，将每5分钟发送一次数据，再第五分钟后检测设备有误运动，无将切换到静止状态，有立即发送数据。
801 801  
802 -* (% style="color:red" %)**1: GPS ONLY(Factory Settings):    **(%%)only get and uplink GPS location info.
803 -* (% style="color:red" %)**2: BLE ONLY:              **(%%)Only obtain iBeacon info via BLE and uplink. Design for Indoor tracking.
804 -* (% style="color:red" %)**3: GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.Devices will try to search BLE iBeacon first. If device can't find the iBeacon, it will use GPS for positioning.
805 805  
806 -(% style="color:#037691" %)**bb:**
807 807  
808 -* (% style="color:red" %)**0 :  **(%%)GPS+ BAT+ State+Tem&Hum
809 -* (% style="color:red" %)**1 :**(%%)  GPS +BAT State
625 +* (% style="color:blue" %)**AT Command:**
810 810  
811 -(% style="color:#037691" %)**cc:   **
627 +(% style="color:#037691" %)**AT+SMOD=xx. **
812 812  
813 -* (% style="color:red" %)**1 : **(%%) (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State  
814 814  
815 -(% style="color:blue" %)**Example:**
630 + **Example:**
816 816  
817 - AT+ SMOD =1,0 ,0 ~-~->  GPS+ BAT+ State+Tem&Hum
818 - AT+ SMOD =1,1,0 ~-~->  GPS +BAT State
819 - AT+ SMOD =2,0,1 ~-~->  (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State
632 + AT+ SMOD =1,0  **~-~-> ** GPS+ BAT+ State+Tem&Hum
820 820  
634 + AT+ SMOD =1,1    **~-~->**  GPS +BAT State
821 821  
636 + AT+ SMOD =2,3    **~-~->**  (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State。
637 +
638 +
822 822  * (% style="color:blue" %)**Downlink Payload (prefix 0xA5):**
823 823  
824 -(% style="color:#037691" %)**0xA5 01 00 00**    (%%) ~/~/  Same as AT+ SMOD =1,0,0
641 +(% style="color:#037691" %)**0xA5 01 00**    (%%) ~/~/  Same as AT+ SMOD =1,0
825 825  
826 826  
827 827  
... ... @@ -838,7 +838,7 @@
838 838  
839 839  (% style="color:#037691" %)**AT+FTIME=xx**  (%%) **~-~-> ** Set to use xx as max fix time.
840 840  
841 -**Example:**  AT+FTIME=150
658 +Example:  AT+FTIME=150
842 842  
843 843  
844 844  * (% style="color:blue" %)**Downlink Payload (prefix 0xAA):**
... ... @@ -847,7 +847,7 @@
847 847  
848 848  
849 849  
850 -=== 3.2.9 Set PDOP value for GPS fix accuracy ===
667 +=== 3.3.9 Set PDOP value for GPS fix accuracy ===
851 851  
852 852  
853 853  PDOP(Position Dilution of Precision) filter, TrackerD will only accept GPS data with a lower PDOP value than pre-configure PDOP value. If device can't get a valid GPS packet within FTIME timeout, it will use the GPS data with lowest PDOP value to server.
... ... @@ -875,7 +875,7 @@
875 875  
876 876  * (% style="color:blue" %)**AT Command:**
877 877  
878 -(% style="color:#037691" %)**AT+CFM=xx**
695 +(% style="color:#037691" %)**AT+CFM=xx. **
879 879  
880 880  
881 881  **~ Example:**
... ... @@ -891,27 +891,6 @@
891 891  
892 892  
893 893  
894 -=== 3.2.10  Auto Send None-ACK messages ===
895 -
896 -
897 -TrackerD will wait for ACK for each uplink, If TrackerD doesn't get ACK from the IoT server, it will consider the message doesn't arrive server and store it. TrackerD keeps sending messages in normal periodically. Once TrackerD gets ACK from a server, it will consider the network is ok and start to send the not-arrive message.
898 -
899 -
900 -* (% style="color:blue" %)**AT Command: AT+PNACKMD**
901 -
902 -The default factory setting is 0.
903 -
904 -
905 -**Command Example Function Response:**
906 -
907 -(% style="color:#037691" %)**AT+PNACKMD=1**  (%%) ~/~/  Poll None-ACK message OK
908 -
909 -
910 -* (% style="color:blue" %)**Downlink Command: 0x34**
911 -
912 -Example: 0x3401  ~/~/  Same as AT+PNACKMD=1
913 -
914 -
915 915  = 4. Setting for Different Scenarios =
916 916  
917 917  
... ... @@ -940,7 +940,7 @@
940 940  After installation of the driver and plug in TrackerD, user should be able to see com port in PC's device manager.
941 941  
942 942  
943 -(% style="color:blue" %)**Step3:  **(%%)Download and Install Flash Tool:  [[https:~~/~~/www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools>>url:https://www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools]]
739 +(% style="color:blue" %)**Step3：**(%%) Download and Install Flash Tool:  [[https:~~/~~/www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools>>url:https://www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools]]
944 944  
945 945  
946 946  (% style="color:blue" %)**Step4:** (%%) Run Flash Download Tool and configure chip type to ESP32
... ... @@ -954,7 +954,7 @@
954 954  
955 955  (% style="color:blue" %)**Step5:** (%%) Select the firmware file (.bin format), com port and proper SPI configure. Clink Start. Bin file location:
956 956  
957 -[[https:~~/~~/github.com/dragino/TrackerD/releases>>https://github.com/dragino/TrackerD/releases]]
753 +[[https:~~/~~/www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0>>url:https://www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0]]
958 958  
959 959  
960 960  Users need to use below files:
... ... @@ -983,7 +983,7 @@
983 983  === 6.1.1 Set up ARDUINO compile environment ===
984 984  
985 985  
986 -* **Download the latest Arduino software (IDE) from the Arduino official website:  [[https:~~/~~/www.arduino.cc/en/Main/Software>>url:https://www.arduino.cc/en/Main/Software]]**
782 +* Download the latest Arduino software (IDE) from the Arduino official website:  [[https:~~/~~/www.arduino.cc/en/Main/Software>>url:https://www.arduino.cc/en/Main/Software]]
987 987  
988 988  Install IDE on PC, open and click (% style="color:#037691" %)**File ~-~-> Preference**,(%%) add the following URL:  [[https:~~/~~/dl.espressif.com/dl/package_esp32_index.json>>url:https://links.jianshu.com/go?to=https%3A%2F%2Fdl.espressif.com%2Fdl%2Fpackage_esp32_index.json]]
989 989  
... ... @@ -991,14 +991,13 @@
991 991  [[image:1664503635019-941.png]]
992 992  
993 993  
790 +* (% style="color:#037691" %)**Go to tools ~-~-> Boards ~-~-> Boards Manager**,(%%) find the esp32 information and install it.
994 994  
995 -* (% style="color:#037691" %)**Go to tools ~-~-> Boards ~-~-> Boards Manager**,(%%) **find the esp32 information and install it.**
996 -
997 997  [[image:1664503715811-892.png]]
998 998  
999 999  
1000 1000  
1001 -* **Download the latest TrackerD from the dragino github: [[https:~~/~~/github.com/dragino/TrackerD>>url:https://github.com/dragino/TrackerD]]**
796 +* Download the latest TrackerD from the dragino github: [[https:~~/~~/github.com/dragino/TrackerD>>url:https://github.com/dragino/TrackerD]]
1002 1002  
1003 1003  Put the Library in the TrackerD directory into the libraries file in the Arduino directory:
1004 1004  
... ... @@ -1045,8 +1045,8 @@
1045 1045  
1046 1046  
1047 1047  
1048 -(% border="1.5" cellspacing="3" style="background-color:#ffffcc; color:green; width:314px" %)
1049 -|=(% style="width: 118px;" %)**Pin**|=(% style="width: 67px;" %)**Color**|=(% style="width: 123px;" %)**USB Pin**
843 +(% border="2" style="background-color:#ffffcc; color:green; width:314px" %)
844 +|(% style="width:118px" %)**Pin**|(% style="width:67px" %)**Color**|(% style="width:123px" %)**USB Pin**
1050 1050  |(% style="width:118px" %)A4,B4,A9,B9|(% style="width:67px" %)Red|(% style="width:123px" %)VCC
1051 1051  |(% style="width:118px" %)A7,B7|(% style="width:67px" %)White|(% style="width:123px" %)D- (N/A)
1052 1052  |(% style="width:118px" %)A6,B6|(% style="width:67px" %)Green|(% style="width:123px" %)D+(N/A)
... ... @@ -1056,9 +1056,6 @@
1056 1056  |(% style="width:118px" %)A8|(% style="width:67px" %)Yellow|(% style="width:123px" %)MTMS/GPIO14
1057 1057  |(% style="width:118px" %)B8|(% style="width:67px" %)Grey|(% style="width:123px" %)MTDO/GPIO15
1058 1058  
1059 -
1060 -
1061 -
1062 1062  = 8.  Order Info =
1063 1063  
1064 1064  
... ... @@ -1074,31 +1074,25 @@
1074 1074  * (% style="color:red" %)**AU915**(%%): Default frequency band AU915
1075 1075  * (% style="color:red" %)**US915**(%%): Default frequency band US915
1076 1076  
1077 -
1078 -
1079 1079  = 9.  Packing Info =
1080 1080  
1081 1081  
1082 -(% style="color:#037691" %)**Package Includes**:
872 +**Package Includes**:
1083 1083  
1084 1084  * TrackerD LoRaWAN GPS/BLE Tracker x 1
1085 1085  * USB recharge & program cable x 1
1086 1086  
1087 -(% style="color:#037691" %)**Dimensions and Weight**:
877 +**Dimensions and Weight**:
1088 1088  
1089 1089  * Device Size: 85 x 48 x 15 cm
1090 1090  * Weight: 50g
1091 1091  
1092 -
1093 -
1094 1094  = 10. Support =
1095 1095  
1096 1096  
1097 1097  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1098 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]].
886 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]]
1099 1099  
1100 -
1101 -
1102 1102  = 11.  Reference =
1103 1103  
1104 1104  
... ... @@ -1105,5 +1105,3 @@
1105 1105  * [[**Firmware in Bin format**>>https://www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0]]
1106 1106  * **[[Source Code>>https://github.com/dragino/TrackerD]] **
1107 1107  * [[**Hardware Source**>>https://www.dropbox.com/sh/orwoy6cecb89m4e/AAD37sRuUrvKsHgAJxuVTkB5a?dl=0]]
1108 -
1109 -
1665301570342-765.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.6 KB
Content
1665301636888-168.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.6 KB
Content
1665301687277-443.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -22.6 KB
Content
1665301786397-168.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -22.6 KB
Content
image-20221006181316-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -17.7 KB
Content
image-20221006181357-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -88.0 KB
Content
image-20221009160220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -46.4 KB
Content
image-20221009160309-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -57.2 KB
Content
image-20221009234629-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -222.9 KB
Content
image-20221009234703-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -136.4 KB
Content