Skip to Content
Last modified by Xiaoling on 2025/04/27 16:48
From version 74.6
edited by Xiaoling
on 2022/10/11 14:39
Change comment: There is no comment for this version
To version 51.8
edited by Xiaoling
on 2022/09/30 11:24
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -25,14 +25,10 @@
25 25  (((
26 26  In TrackerD, there are various sensors such as GPS, WiFi, BLE, Temperature, Humidity, Motion Detection, and Buzzer. User can use TrackerD for different tracking scenario.
27 27  
28 -(((
29 29  TrackerD is program friendly. Developers can use Arduino IDE to customize the software of TrackerD to fit their IoT solution.
30 -)))
31 31  
32 -(((
33 33  The LoRa wireless technology used in TrackerD allows the user to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional tracking services.
34 34  )))
35 -)))
36 36  
37 37  (((
38 38  TrackerD is equipped with a (% style="color:blue" %)**1000mAh Li-on rechargeable battery**(%%). Each TrackerD has a worldwide unique OTAA keys to join the LoRaWAN network.
... ... @@ -98,7 +98,6 @@
98 98  * Tracking: max: 38mA
99 99  
100 100  
101 -
102 102  == 1.3  Features ==
103 103  
104 104  
... ... @@ -105,7 +105,7 @@
105 105  * LoRaWAN 1.0.3 Class A
106 106  * ESP32 PICO D4
107 107  * SX1276/78 Wireless Chip
108 -* Arduino IDE Compatible
103 +* Arduino IDE Compatible
109 109  * Open source hardware / software
110 110  * Regular/ Real-time GPS,BLE,WIFI tracking
111 111  * Built-in3 axis accelerometer (LIS3DH)
... ... @@ -117,8 +117,6 @@
117 117  * Tri-color LED, Alarm button
118 118  * Datalog
119 119  
120 -
121 -
122 122  == 1.4  Applications ==
123 123  
124 124  
... ... @@ -126,7 +126,6 @@
126 126  * Human tracking
127 127  
128 128  
129 -
130 130  = 2.1 Use TrackerD =
131 131  
132 132  
... ... @@ -189,185 +189,104 @@
189 189  (% style="color:blue" %)**Step 3:**(%%) TrackerD will auto join to the LoRaWAN network. After join success, TrackerD will start to upload message to IoT server.
190 190  
191 191  
184 +(% style="color:blue" %)**Positioning Mode(SMOD):**
192 192  
193 -== 2.3  Positioning Mode(SMOD) ==
186 +* **(% style="color:#037691" %)GPS ONLY(Factory Settings):  **(%%)only get GPS location info.
187 +* **(% style="color:#037691" %)BLE ONLY:  **(%%)Only obtain iBeacon info via BLE. Design for Indoor tracking.
188 +* **(% style="color:#037691" %)GPS/BLE Hybrid:  **(%%)Combination for Indoor and Outdoor tracking.
194 194  
190 +User can switch modes by [[changing SMOD>>||anchor="H3.2.7SetPositioningMode"]].
195 195  
196 -Users can set TrackerD to different Positioning Mode for different applications. Below mod are supported.
197 197  
198 -* (% style="color:#037691" %)**GPS ONLY(Factory Settings):    **(%%)only get and uplink GPS location info.
199 -* (% style="color:#037691" %)**BLE ONLY:              **(%%)Only obtain iBeacon info via BLE and uplink. Design for Indoor tracking.
200 -* (% style="color:#037691" %)**GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.Devices will try to search BLE iBeacon first. If device can't find the iBeacon, it will use GPS for positioning.
201 201  
202 -Users can switch modes by [[changing SMOD>>||anchor="H3.2.7SetPositioningMode"]].
194 +== 2.3 Uplink Payload ==
203 203  
204 204  
197 +=== 2.3.1 Uplink FPORT~=5, Device Status ===
205 205  
206 -== 2.4  Uplink Payload ==
207 207  
208 208  
209 -=== 2.4.1 Uplink FPORT~=5, Device Status ===
201 +=== 2.3.2 Uplink FPORT~= , Realtime GNSS Positioning ===
210 210  
211 211  
212 -Uplink the device configures with FPORT=5. Once TrackerD Joined the network, it will uplink this message to the server. After the first uplink, TrackerD will uplink Device Status every 12 hours.
204 +The default uplink payload includes totally 11 bytes. (User can use AT+MOD=0 to enable the Temperature and humidity sensor to hum/tem info from accelerometer. When accelerometer info is enable, total payload will be 15 bytes, please note 15 bytes won't work on DR0 on US915/AU915 frequency band. )
213 213  
214 214  
215 -(% border="1.5" style="background-color:#ffffcc; color:green; width:520px" %)
216 -|=(% scope="row" style="width: 108px;" %)**Size(bytes)**|=(% style="width: 82px;" %)**1**|=(% style="width: 83px;" %)**2**|=(% style="width: 94px;" %)**1**|=(% style="width: 84px;" %)**1**|=(% style="width: 44px;" %)2|=(% style="width: 63px;" %)**2**|=(% style="width: 60px;" %)1
217 -|=(% style="width: 108px;" %)**Value**|(% style="width:82px" %)Sensor Model|(% style="width:83px" %)Firmware Version|(% style="width:94px" %)Frequency Band|(% style="width:84px" %)Sub-band|(% style="width:44px" %)BAT|(% style="width:63px" %)SMOD|(% style="width:60px" %)Status
207 +(% border="2" style="background-color:#ffffcc; color:green; width:537px" %)
208 +|(% style="width:69px" %)(((
209 +**Size**
218 218  
219 -[[image:1665301570342-765.png]]
211 +**(bytes)**
212 +)))|(% style="width:76px" %)4|(% style="width:87px" %)4|(% style="width:76px" %)2|(% style="width:52px" %)1|(% style="width:88px" %)(((
213 +2
220 220  
221 -
222 -(% style="color:#037691" %)**Example of Device Status:**(%%) 13014001FF0FA24002
223 -
224 -(% style="color:#037691" %)**Sensor Model:** (%%) For TrackerD,this value is 0x13
225 -
226 -(% style="color:#037691" %)**Firmware Version: **(%%) 0x0140,Means:v1.4.0 version
227 -
228 -(% style="color:#037691" %)**Frequency Band**:
229 -
230 -*0x01: EU868
231 -
232 -*0x02: US915
233 -
234 -*0x03: IN865
235 -
236 -*0x04: AU915
237 -
238 -*0x05: KZ865
239 -
240 -*0x06: RU864
241 -
242 -*0x07: AS923
243 -
244 -*0x08: AS923-1
245 -
246 -*0x09: AS923-2
247 -
248 -*0x0a: AS923-3
249 -
250 -Sub- Band:value 0x00~~0x08(only forAU915,US915,Others are 0xFF)
251 -
252 -(% style="color:#037691" %)**BAT:**(%%) shows the battery voltage for TrackerD.
253 -
254 -
255 -(% style="color:#037691" %)**Ex1:**(%%) 0x0FA2 = 4002mV
256 -
257 -Use can also get the Device Status uplink through the downlink command:
258 -
259 -TrackerD Model：0x40
260 -
261 -(% border="1.5" style="background-color:#ffffcc; color:green; width:314px" %)
262 -|(% style="width:75px" %)**Size(bit)**|(% style="width:64px" %)2bits|(% style="width:88px" %)2bit|(% style="width:84px" %)4bit
263 -|(% style="width:75px" %)**Value**|(% style="width:64px" %)SMOD|(% style="width:88px" %)GPS_MOD|(% style="width:84px" %)BLE_MOD
264 -
265 -(% style="color:blue" %)**SMOD：**
266 -
267 -(% style="color:red" %)**1 :** (%%) GPS ONLY
268 -
269 -(% style="color:red" %)**2 :** (%%) BLE ONLY
270 -
271 -(% style="color:red" %)**3 :**  (%%) GPS/BLE Hybrid
272 -
273 -
274 -(% style="color:blue" %)**GPS MOD:**
275 -
276 -(% style="color:red" %)**0 : ** (%%) Enable uploading on-board Temperature and humidity values
277 -
278 -(% style="color:red" %)**1 :** (%%) Disable uploading on-board Temperature and humidity values
279 -
280 -
281 -(% style="color:blue" %)**BLE MOD:**
282 -
283 -(% style="color:red" %)**1: ** (%%) BLE Positioning with Strongest iBeacon
284 -
285 -TrackerD Status:  0x02
286 -
287 -(% border="1.5" style="background-color:#ffffcc; color:green; width:345px" %)
288 -|(% style="width:77px" %)**Size(bit)**|(% style="width:91px" %)1bits|(% style="width:48px" %)1bit|(% style="width:126px" %)1bit
289 -|(% style="width:77px" %)**Value**|(% style="width:91px" %)PNACKMD|(% style="width:48px" %)LON|(% style="width:126px" %)Transport** **Mode
290 -
291 -(% style="color:red" %)**0 : **(%%) Transport Mode
292 -
293 -(% style="color:red" %)**1 :  **(%%) AT+LON
294 -
295 -(% style="color:red" %)**2 : **(%%) Datalog Enable/Disable
296 -
297 -
298 -
299 -=== 2.4.2 Uplink FPORT~=2, Realtime GNSS Positioning + Temperature & Humidity ===
300 -
301 -
302 -User can use **AT+SMOD=1,0** to enable uploading on-board Temperature and humidity values, and the total payload will be 15 bytes, please note that 15 bytes won't work on DR0 on US915/AU915 frequency band.
303 -
304 -
305 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:480px" %)
306 -|=(% scope="row" style="width: 50px;" %)(((
307 -**Size(bytes)**
308 -)))|(% style="width:60px" %)4|(% style="width:70px" %)4|(% style="width:80px" %)2|(% style="width:73px" %)1|(% style="width:40px" %)(((
215 +(optional )
216 +)))|(% style="width:83px" %)(((
309 309  2
310 -)))|(% style="width:87px" %)(((
311 -2
218 +
219 +(optional)
312 312  )))
313 -|=(% style="width: 69px;" %)**Value**|(% style="width:76px" %)[[Latitude>>||anchor="HLocationinfo:"]]|(% style="width:87px" %)[[Longitude>>||anchor="HLocationinfo:"]]|(% style="width:76px" %)(((
221 +|(% style="width:69px" %)**Value**|(% style="width:76px" %)[[Latitude>>||anchor="HLocationinfo:"]]|(% style="width:87px" %)[[Longitude>>||anchor="HLocationinfo:"]]|(% style="width:76px" %)(((
314 314  [[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
315 -)))|(% style="width:73px" %)[[FLAG>>||anchor="HFLAG:"]]|(% style="width:40px" %)[[Hum>>||anchor="HHum:"]]|(% style="width:87px" %)[[Tem>>||anchor="HTem:"]]
316 316  
317 -[[image:1665301636888-168.png]]
224 +)))|(% style="width:52px" %)[[FLAG>>||anchor="HFLAG:"]]|(% style="width:88px" %)[[Hum>>||anchor="HHum:"]]|(% style="width:83px" %)[[Tem>>||anchor="HTem:"]]
318 318  
319 319  
320 -==== (% style="color:blue" %)**Alarm & BAT:**(%%) ====
227 +[[image:1664501958445-288.png]]
321 321  
322 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:250px" %)
323 -|=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)1 bit|(% style="width:80px" %)1bit|(% style="width:50px" %)14bits
324 -|=(% style="width: 72px;" %)**Value**|(% style="width:67px" %)reserve|(% style="width:118px" %)Alarm Indicate|(% style="width:63px" %)[[BAT>>||anchor="HBAT:"]] 
325 325  
230 +==== Alarm & BAT: ====
326 326  
232 +(% border="2" style="background-color:#ffffcc; color:green; width:329px" %)
233 +|(% style="width:72px" %)**Size(bit)**|(% style="width:67px" %)1 bit|(% style="width:118px" %)1bit|(% style="width:63px" %)14 bits
234 +|(% style="width:72px" %)**Value**|(% style="width:67px" %)reserve|(% style="width:118px" %)Alarm Indicate|(% style="width:63px" %)[[BAT>>||anchor="HBAT:"]] 
327 327  
328 -==== (% style="color:blue" %)**FLAG:**(%%) ====
329 329  
330 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:250px" %)
331 -|=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)2bits|(% style="width:50px" %)1bit
332 -|=(% style="width: 79px;" %)**Value**|(% style="width:55px" %)[[MOD>>||anchor="H3.2.7SetPositioningMode"]]|(% style="width:47px" %)[[LON>>||anchor="HLON:"]]
237 +==== FLAG: ====
333 333  
334 -**Example:** Payload: 0x02863D68 FAC29BAF 4B45 60 0202 011A 
239 +(% border="2" style="background-color:#ffffcc; color:green; width:332px" %)
240 +|(% style="width:79px" %)**Size(bit)**|(% style="width:55px" %)2 bits|(% style="width:47px" %)1bit|(% style="width:140px" %)5 bits
241 +|(% style="width:79px" %)**Value**|(% style="width:55px" %)[[MOD>>||anchor="H2.3.4BLEpositioningPayload28Fport229"]]|(% style="width:47px" %)[[LON>>||anchor="HLocationinfo:"]]|(% style="width:140px" %)Firmware version 
335 335  
243 +**(% style="color:blue" %)Example: Payload: 0x02863D68 FAC29BAF 4B45 60 0202 011A  **
336 336  
337 -==== (% style="color:blue" %)**Location info:**(%%) ====
338 338  
339 -* Latitude: 02863D68  ⇒  //if (0x//02863D68//& 0x80000000 = 0 )~://  //value = 02863D68 /1000000 = 42.351976//
340 -* Longitude: FAC29BAF  ⇒ //if (0x//FAC29BAF// & 0x80000000 = 1 )~://  //value = (0x//FAC29BAF// – 0x 100000000)/1000000 =//-87.9094//57//
246 +==== Location info: ====
341 341  
342 -(% style="color:red" %)**Important note:**
248 +* Latitude: 02863D68  ⇒  //if (0x//02863D68//& 0x80000000 = 0 )~://  //value = 02863D68 /1000000 = 42.351976//
249 +* Longitude: FAC29BAF  ⇒ //if (0x//FAC29BAF// & 0x80000000 = 1 )~://  //value = (0x//FAC29BAF// – 0x 100000000)/1000000 =//-87.9094//57//
343 343  
251 +**(% style="color:red" %)Important note:**
252 +
344 344  1.  When power is low (<2.84v), GPS won't be able to get location info and GPS feature will be disabled and the location field will be filled with 0x0FFFFFFF, 0x0FFFFFFF.
345 345  
346 -2.  In this mode, the total payload will be 15 bytes, while US915/AU915 DR0 accepts only 11 bytes payload. In this case, the payload on server will be ignore and shows as below:
255 +2.  In firmware version v1.5, Roll & Pitch is disabled by default.
347 347  
257 +3.  When enable 9-axis motion sensor, the total payload will be 15 bytes, while US915/AU915 DR0 accept only 11 bytes payload. In this case, the payload on server will be ignore and shows as below:
348 348  
259 +
349 349  [[image:1664502116362-706.png]]
350 350  
351 351  
352 -3.  While GPS can't get location info after timeout(FTIME Parameter), the latitude and longitude will be filled with all 0x00:
353 353  
264 +4.  While GPS can't get location info after timeout(FTIME Parameter), the latitude and longitude will be filled with all 0x00:
265 +
354 354  [[image:1664502166010-515.png]]
355 355  
356 356  
357 357  
358 -==== (% style="color:blue" %)**Alarm:**(%%) ====
270 +==== Alarm: ====
359 359  
360 360  Example:  0x4B & 0x40 >> 6 = 0x01
361 361  
362 362  
363 -==== (% style="color:blue" %)**BAT:**(%%) ====
275 +==== BAT: ==== 
364 364  
365 365  Example:  0x0CDD & 0x3FFF ⇒ 3293 (mV).
366 366  
367 -(((
368 -The battery info shows the battery voltage, User can use the below mapping to indicate the battery in percentage: \
369 -)))
279 +The battery info shows the current voltage, for **(% style="color:blue" %)TrackerD**(%%) version which powered by li-on battery. User can use below mapping to indicate the battery in percentage: \
370 370  
281 +
371 371  * > 4.0v :  80% ~~ 100%
372 372  * 3.85v ~~3.99v:  60% ~~ 80%
373 373  * 3.70v ~~ 3.84v:  40% ~~ 60%
... ... @@ -375,126 +375,79 @@
375 375  * < 3.39v:  0~~20%
376 376  
377 377  
378 -
379 -==== (% style="color:blue" %)**MOD:**(%%) ====
380 -
381 -Set the format of GPS data uplink link
382 -
383 -0x00:  Enable uploading on-board Temperature and humidity values
384 -
385 -0x01:  Disable uploading on-board Temperature and humidity values
386 -
387 -
388 -==== (% style="color:blue" %)**LON:**(%%) ====
389 -
289 +==== LON: ====
390 390  Enable/Disable LED activity for uplink
391 391  
392 -(((
393 393  0x00:  Disable LED indicator.
394 -)))
395 395  
396 -(((
397 397  0x01:  Enable LED indicator (Default Value)
398 -)))
399 399  
400 400  
401 -==== (% style="color:blue" %)**Hum:**(%%) ====
297 +==== Hum: ====
402 402  
403 403  0202 = //if (0x0202 & 0x8000 = 0 ):  value =// 0x0202 / 100 = +514 ⇒ 51.4 degree
404 404  
405 405  
406 -==== (% style="color:blue" %)**Tem:**(%%) ====
302 +==== Tem: ====
407 407  
408 -011A =if (0x011A & 0x8000 = 1 ):  value =( 0x011A - 0x10000)/10(dec) ⇒ -//28.2 degree//
304 +011A =if (0x011A & 0x8000 = 1 ):  value =( 0x011A - 0x10000)/10(dec) ⇒ -//28.2 degree
409 409  
410 410  
411 411  
412 -=== 2.4.3  Uplink FPORT~=3, Realtime GNSS Positioning (Default Mode) ===
413 413  
309 +=== 2.3.3 Uplink FPORT~= , History GNSS Positioning ===
414 414  
415 -The default uplink payload includes totally 11 bytes. The payload is the first 11 bytes of Uplink FPORT=2, real-time GNSS positioning, (remove the temp and humidity)
416 416  
417 417  
418 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:480px" %)
419 -|=(% scope="row" style="width: 50px;" %)(((
420 -**Size(bytes)**
421 -)))|(% style="width:60px" %)4|(% style="width:70px" %)4|(% style="width:80px" %)2|(% style="width:73px" %)1
422 -|=(% style="width: 69px;" %)**Value**|(% style="width:76px" %)[[Latitude>>||anchor="HLocationinfo:"]]|(% style="width:87px" %)[[Longitude>>||anchor="HLocationinfo:"]]|(% style="width:76px" %)(((
423 -[[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
424 -)))|(% style="width:73px" %)[[FLAG>>||anchor="HFLAG:"]]
313 +=== 2.3.4 BLE positioning Payload(Fport2) ===
425 425  
426 -(% class="wikigeneratedid" %)
427 -[[image:1665301687277-443.png]]
428 428  
316 +Different MODE has different payload:
429 429  
318 +**MODE=2**
430 430  
431 -=== 2.4.4  Uplink FPORT~=4, History GNSS Positioning ===
320 +(% border="2" style="background-color:#ffffcc; color:green; width:620px" %)
321 +|(% style="width:70px" %)(((
322 +**Size**
432 432  
433 -
434 -Set [[PNACKMD=1>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H4.13AutoSendNone-ACKmessages]], and TrackerD will wait for ACK for every uplink, when there is no LoRaWAN network, TrackerD will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
435 -
436 -
437 -(% style="color:red" %)**Note for this mode:**
438 -
439 -* a) TrackerD will do an ACK check for data records sending to make sure every data arrive server.
440 -* b) TrackerD will send data in (% style="color:blue" %)**CONFIRMED Mode**(%%) when PNACKMD=1, but TrackerD won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink, if TrackerD gets an ACK, TrackerD will consider there is a network connection and resend all NONE-ACK Messages.
441 -
442 -The payload is 15 bytes, as below.
443 -
444 -(% border="1.5" style="background-color:#ffffcc; color:green; width:520px" %)
445 -|=(% scope="row" %)(((
446 -**Size(bytes)**
447 -)))|4|4|2|1|1|1|1|1
448 -|=**Value**|Latitude|Longitude|Year|Month|Day|Hous|Min|Sen
449 -
450 -[[image:image-20221009160309-2.png]]
451 -
452 -
453 -
454 -=== 2.4.5  Uplink FPORT~=6, BLE Positioning with Strongest iBeacon ===
455 -
456 -
457 -(% border="1.5" cellspacing="3" style="background-color:#ffffcc; color:green; width:450px" %)
458 -|=(% scope="row" style="width: 60px;" %)(((
459 -**Size(bytes)**
460 -)))|(% style="width:30px" %)16|(% style="width:50px" %)4|(% style="width:50px" %)4|(% style="width:120px" %)2|(% style="width:50px" %)4|(% style="width:50px" %)2|(% style="width:30px" %)1
461 -|=(% style="width: 50px;" %)**Value**|(% style="width:44px" %)[[UUID>>||anchor="HLocationinfo:"]]|(% style="width:61px" %)(((
324 +**(bytes)**
325 +)))|(% style="width:54px" %)16|(% style="width:72px" %)4|(% style="width:71px" %)4|(% style="width:145px" %)2|(% style="width:72px" %)4|(% style="width:76px" %)2|(% style="width:54px" %)1
326 +|(% style="width:70px" %)**Value**|(% style="width:54px" %)[[UUID>>||anchor="HLocationinfo:"]]|(% style="width:72px" %)(((
462 462  iBeacon MAJOR
463 -)))|(% style="width:63px" %)(((
464 -iBeacon MINOR
465 465  )))|(% style="width:71px" %)(((
329 +iBeacon MINOR
330 +)))|(% style="width:145px" %)(((
466 466  iBeacon Measured Power
467 -)))|(% style="width:50px" %)(((
332 +)))|(% style="width:72px" %)(((
468 468  iBeacon RSSI
469 -)))|(% style="width:47px" %)(((
334 +)))|(% style="width:76px" %)(((
470 470  [[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
471 -)))|(% style="width:15px" %)[[FLAG>>||anchor="HFLAG:"]]
336 +)))|(% style="width:54px" %)[[FLAG>>||anchor="HFLAG:"]]
472 472  
473 473  [[image:1664502425687-834.png]]
474 474  
475 475  
476 -* (% style="color:#037691" %)**BAT: ** (%%) Ex1: 0x4B45 & 0x3FFF ⇒ 3901 (mV).
477 -* (% style="color:#037691" %)**MODE:   **(%%)Define the payload format.
478 -* (% style="color:#037691" %)**UUID:     **(%%)The uuid from the strongest iBeacon.
479 -* (% style="color:#037691" %)**MAJOR:** (%%) The MAJOR from the strongest iBeacon.
480 -* (% style="color:#037691" %)**MINOR:**  (%%)The MAJOR from the strongest iBeacon.
481 -* (% style="color:#037691" %)**Measured Power: ** (%%) The Measured Power from the strongest iBeacon.
482 -* (% style="color:#037691" %)**RSSI:  ** (%%) The RSSI from the strongest iBeacon.
341 +* **(% style="color:#037691" %)BAT: ** (%%) Ex1: 0x4B45 & 0x3FFF ⇒ 3901 (mV).
342 +* **(% style="color:#037691" %)MODE:   **(%%)Define the payload format.
343 +* **(% style="color:#037691" %)UUID:     **(%%)The uuid from the strongest iBeacon.
344 +* **(% style="color:#037691" %)MAJOR:** (%%) The MAJOR from the strongest iBeacon.
345 +* **(% style="color:#037691" %)MINOR:**  (%%)The MAJOR from the strongest iBeacon.
346 +* **(% style="color:#037691" %)Measured Power: ** (%%) The Measured Power from the strongest iBeacon.
347 +* **(% style="color:#037691" %)RSSI:  ** (%%) The RSSI from the strongest iBeacon.
483 483  
484 484  
485 485  
486 486  
487 -=== 2.4.6  Add Payload format in TTN V3 ===
352 +=== 2.3.5 Add Payload format in TTN V3 ===
488 488  
489 489  
490 490  In TTN V3, use can add a custom payload so it shows friendly.
491 491  
492 -In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**
357 +In the page Applications(% style="color:#037691" %) ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder
493 493  
494 494  
495 495  [[image:1664502649601-895.png]]
496 496  
497 -
498 498  Add the decoder from this link:
499 499  
500 500  
... ... @@ -504,16 +504,12 @@
504 504  
505 505  
506 506  
507 -== 2.5 Integrate with Datacake ==
371 +== 2.4 Integrate with Datacake ==
508 508  
509 509  
510 -(((
511 511  After TrackerD sends data to LoRaWAN server such as TTN, use can pass the data to Datacake and plot out, currently only support GPS plot.
512 -)))
513 513  
514 -(((
515 515  Instruction is here:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20Data%20Cake/#H7.Example~~-~~-AddTrackerDGPSTrackingInDataCake>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20Data%20Cake/#H7.Example--AddTrackerDGPSTrackingInDataCake]]
516 -)))
517 517  
518 518  
519 519  [[image:1664502695771-538.png]]
... ... @@ -520,16 +520,12 @@
520 520  
521 521  
522 522  
523 -== 2.6 Integrate with Tago ==
383 +== 2.5 Integrate with Tago ==
524 524  
525 525  
526 -(((
527 527  After TrackerD sends data to LoRaWAN server such as TTN, use can pass the data to Datacake and plot out, currently only support GPS plot.
528 -)))
529 529  
530 -(((
531 531  Instruction is here: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Tago.IO/#H3.A0Example-CreateTrackerD2FLGT92positioningwidget>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Tago.IO/#H3.A0Example-CreateTrackerD2FLGT92positioningwidget]]
532 -)))
533 533  
534 534  
535 535  [[image:1664502715371-321.png]]
... ... @@ -536,107 +536,78 @@
536 536  
537 537  
538 538  
539 -== 2.7  Datalog Feature ==
395 +== 2.6 Alarm Mode ==
540 540  
541 541  
542 -total 273 entries,by default disable
398 +User can push the **RED button** by more than 5 seconds to enter Alarm Mode.
543 543  
544 544  
545 -Example use case.
401 +Once enter Alarm mode, the **GREEN LED** will flash 3 times, the buzzer will alarm for 5 seconds, then TrackerD will immediately send a packet without location info and then send a data packet with GPS positioning information. After that, the device will send 60 packets at 1-minute intervals. The Alarm flag in the payload will be set for the next 60 packets unless exit alert mode.
546 546  
547 -[[image:image-20221009234703-2.png||height="328" width="899"]]
548 548  
549 -
550 -[[image:image-20221009234629-1.png||height="390" width="577"]]
551 -
552 -
553 -
554 -== 2.8 Alarm Mode ==
555 -
556 -
557 -(((
558 -User can push the (% style="color:red" %)**RED button**(%%) by more than 5 seconds to enter Alarm Mode.
559 -)))
560 -
561 -
562 -(((
563 -Once enter Alarm mode, the (% style="color:green" %)**GREEN LED**(%%) will flash 3 times, the buzzer will alarm for 5 seconds, then TrackerD will immediately send a packet without location info and then send a data packet with GPS positioning information. After that, the device will send 60 packets at 1-minute intervals. The Alarm flag in the payload will be set for the next 60 packets unless exit alert mode.
564 -)))
565 -
566 -
567 -(((
568 568  Two ways to exit alarm mode:
569 -)))
570 570  
571 571  * Server send a downlink command to exit.
572 572  * User fast press the RED button 10 times.
573 573  
574 -(((
575 -When exit alarm mode, (% style="color:red" %)**RED LED**(%%) will light up for 5 seconds, indicating that the alarm mode is exited. And the alert flag will be set to false.
576 -)))
409 +When exit alarm mode, **RED LED** will light up for 5 seconds, indicating that the alarm mode is exited. And the alert flag will be set to false.
577 577  
578 578  
579 579  
580 -== 2.9 Transport Mode ==
413 +== 2.7 Sports Mode ~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-- ==
581 581  
582 582  
583 -In Transport Mode, TrackerD will check if there is motion. If there is no motion, device will send uplinks every 20 minutes. If there is motion, device will send uplink every 5 minutes.
584 584  
417 +== 2.8 LED Status ==
585 585  
586 586  
587 -== 2.10 LED Status ==
420 +(% border="2" style="background-color:#ffffcc; color:green; width:636px" %)
421 +|(% style="width:157px" %)**Event**|(% style="width:271px" %)**Action**|(% style="width:202px" %)**AT+LON to control on/off**
422 +|(% style="width:157px" %)**Power On**|(% style="width:271px" %)**BLUE, RED , Green** flash once|(% style="width:202px" %)N/A
423 +|(% style="width:157px" %)**Join request**|(% style="width:271px" %)**Green** led fast blink once (200ms)|(% style="width:202px" %)Yes
424 +|(% style="width:157px" %)**Join Success**|(% style="width:271px" %)**Green** led on 5 second|(% style="width:202px" %)N/A
425 +|(% style="width:157px" %)**Fixing Location**|(% style="width:271px" %)**BLUE **blinks 200ms per second|(% style="width:202px" %)Yes
426 +|(% style="width:157px" %)**Fixed and uplink**|(% style="width:271px" %)**GREEN **blinks twice (200ms per blink)|(% style="width:202px" %)Yes
427 +|(% style="width:157px" %)**Fail Fix and uplink**|(% style="width:271px" %)**RED **blinks twice (200ms per blink)|(% style="width:202px" %)Yes
428 +|(% style="width:157px" %)**Enter Alarm mode**|(% style="width:271px" %)**RED **on for 3 seconds|(% style="width:202px" %)Yes
429 +|(% style="width:157px" %)**Uplink under Alarm**|(% style="width:271px" %)**RED **on for 1 second|(% style="width:202px" %)Yes
430 +|(% style="width:157px" %)**Exit Alarm**|(% style="width:271px" %)**BLUE **led on 5 second|(% style="width:202px" %)Yes
431 +|(% style="width:157px" %)**Get Downlink**|(% style="width:271px" %)**GREEN** led on 1 second|(% style="width:202px" %)Yes
432 +|(% style="width:157px" %)**Movement Detect**|(% style="width:271px" %)**RED **on 500ms|(% style="width:202px" %)N/A
588 588  
589 589  
590 -(% border="1.5" style="background-color:#ffffcc; color:green; width:500px" %)
591 -|=(% style="width: 150px;" %)**Event**|=(% style="width: 200px;" %)**Action**|=(% style="width: 150px;" %)**AT+LON to control on/off**
592 -|(% style="width:157px" %)**Power On**|(% style="width:271px" %)(% style="color:blue" %)**BLUE, **(% style="color:red" %)**RED , **(% style="color:green" %)**Green** flash once|(% style="width:202px" %)N/A
593 -|(% style="width:157px" %)**Join request**|(% style="width:271px" %)(% style="color:green" %)**Green** (%%)led fast blink once (200ms)|(% style="width:202px" %)Yes
594 -|(% style="width:157px" %)**Join Success**|(% style="width:271px" %)(% style="color:green" %)**Green**(%%) led on 5 second|(% style="width:202px" %)N/A
595 -|(% style="width:157px" %)**Fixing Location**|(% style="width:271px" %)(% style="color:blue" %)**BLUE **(%%)blinks 200ms per second|(% style="width:202px" %)Yes
596 -|(% style="width:157px" %)**Fixed and uplink**|(% style="width:271px" %)(% style="color:green" %)**GREEN ***(%%)***blinks twice (200ms per blink)**|(% style="width:202px" %)Yes
597 -|(% style="width:157px" %)**Fail Fix and uplink**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)blinks twice (200ms per blink)|(% style="width:202px" %)Yes
598 -|(% style="width:157px" %)**Enter Alarm mode**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)on for 3 seconds|(% style="width:202px" %)Yes
599 -|(% style="width:157px" %)**Uplink under Alarm**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)on for 1 second|(% style="width:202px" %)Yes
600 -|(% style="width:157px" %)**Exit Alarm**|(% style="width:271px" %)(% style="color:blue" %)**BLUE **(%%)led on 5 second|(% style="width:202px" %)Yes
601 -|(% style="width:157px" %)**Get Downlink**|(% style="width:271px" %)(% style="color:green" %)**GREEN**(%%) led on 1 second|(% style="width:202px" %)Yes
602 -|(% style="width:157px" %)**Movement Detect**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)led on 500ms|(% style="width:202px" %)N/A
603 603  
436 +== 2.9 Button Function ==
604 604  
605 605  
439 +**RESET button:**
606 606  
607 -== 2.11 Button Function ==
608 -
609 -
610 -(% style="color:blue" %)**RESET button:**
611 -
612 612  [[image:1664502835802-546.png]]
613 613  
614 614  Push this button will reboot the device. Device will exit alarm mode and re-join to LoRaWAN server.
615 615  
616 616  
617 -(% style="color:red" %)**RED button:**
446 +**RED button:**
618 618  
619 619  [[image:1664502854406-763.png]]
620 620  
621 621  
622 -(% border="1.5" style="background-color:#ffffcc; color:green; width:520px" %)
623 -|=(% style="width: 100px;" %)**Function**|=(% style="width: 210px;" %)**Action**|=(% style="width: 210px;" %)**Description**
624 -|(% style="width:135px" %)Send Alarm|(% style="width:220px" %)Keep Pressing (% style="color:red" %)**RED**(%%) button for more than 5 seconds|(% style="width:265px" %)Enter Alarm Mode.  See [[Alarm Mode>>||anchor="H2.6AlarmMode"]]
625 -|(% style="width:135px" %)Exit Alarm Mode|(% style="width:220px" %)Fast press the (% style="color:red" %)**RED** (%%)button 10 times|(% style="width:265px" %)Exit Alarm Mode
451 +(% border="2" style="background-color:#ffffcc; color:green; width:627px" %)
452 +|(% style="width:135px" %)**Function**|(% style="width:220px" %)**Action**|(% style="width:265px" %)**Description**
453 +|(% style="width:135px" %)Send Alarm|(% style="width:220px" %)Keep Pressing **RED** button for more than 5 seconds|(% style="width:265px" %)Enter Alarm Mode.  See [[Alarm Mode>>path:#Alarm_Mode]]
454 +|(% style="width:135px" %)Exit Alarm Mode|(% style="width:220px" %)Fast press the **RED** button 10 times|(% style="width:265px" %)Exit Alarm Mode
626 626  |(% style="width:135px" %)Enter Deep Sleep Mode|(% style="width:220px" %)Press and hold the button for 10 seconds, then quickly press the device 3 times to enter deep sleep|(% style="width:265px" %)This is the mode ship out from factory. CPU will be complete in sleep mode and no LoRa activity, only use before deploy.
627 627  
628 628  
458 +== 2.10 USB Port Function ==
629 629  
630 630  
631 -== 2.12 USB Port Function ==
632 -
633 -
634 634  The USB interface of TrackerD has below functions:
635 635  
636 636  * Power on the device
637 637  * Recharge the battery
638 -* [[Configure Device>>||anchor="H3.ConfigureTrackerDviaATcommandorLoRaWANdownlink"]]
639 -* [[Upgrade Firmware>>||anchor="H5.UploadFirmware"]]
465 +* [[Configure Device>>path:#AT_Command]]
466 +* [[Upgrade Firmware>>path:#upgrade_image]]
640 640  
641 641  
642 642  
... ... @@ -645,7 +645,7 @@
645 645  
646 646  User can configure TrackerD via AT Command or LoRaWAN Downlink.
647 647  
648 -LoRaWAN Downlink instruction for different platforms:  [[IoT LoRaWAN Server>>doc:Main.WebHome]]
475 +LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>url:http://wiki.dragino.com/xwiki/bin/view/Main/]]
649 649  
650 650  
651 651  
... ... @@ -658,7 +658,7 @@
658 658  [[image:1664502999401-486.png]]
659 659  
660 660  
661 -In PC, User needs to set serial tool baud rate to (% style="color:green" %)**115200**(%%) to access serial console for TrackerD. TrackerD will output system info once power on and user will be able to send AT commands:
488 +In PC, User needs to set serial tool baud rate to **115200** to access serial console for TrackerD. TrackerD will output system info once power on and user will be able to send AT commands:
662 662  
663 663  
664 664  [[image:1664503022490-662.png]]
... ... @@ -681,16 +681,16 @@
681 681  
682 682  Set device uplink interval.
683 683  
684 -* (% style="color:blue" %)**AT Command:**
511 +* AT Command:
685 685  
686 -(% style="color:#037691" %)**AT+TDC=xxx **
513 +AT+TDC=xxx
687 687  
688 688  Example:  AT+TDC=300000. Means set interval to 5 minutes(300 seconds)
689 689  
690 690  
691 -* (% style="color:blue" %)**Downlink Payload (prefix 0x01):**
518 +* Downlink Payload (prefix 0x01):
692 692  
693 -(% style="color:#037691" %)**0x01 00 01 2C**  (%%) ~/~/  Same as AT+TDC=300000
520 +0x01 00 01 2C     ~/~/  Same as AT+TDC=300000
694 694  
695 695  
696 696  
... ... @@ -699,34 +699,34 @@
699 699  
700 700  Set alarm packet transmit interval
701 701  
702 -* (% style="color:blue" %)**AT Command:**
529 +* AT Command:
703 703  
704 -(% style="color:#037691" %)**AT+ATDC=xx. **
531 +AT+ATDC=xx.
705 705  
706 706  Example:  AT+ATDC=60000  **~-~->    ** Set Alarm Packet Interval to 60 seconds. TrackerD will send every 60 seconds in Alarm mode, Default Value: 60000
707 707  
708 708  
709 -* (% style="color:blue" %)**Downlink Payload (prefix 0xB1):**
536 +* Downlink Payload (prefix 0xB1):
710 710  
711 -(% style="color:#037691" %)**0xB1 00 00 3C ** (%%) ~/~/  Same as AT+ATDC=60000
538 +0xB1 00 00 3C  ~/~/  Same as AT+ATDC=60000
712 712  
713 713  
714 714  
715 -=== 3.2.3 Set Transport Mode Packet transmission interval ===
542 +=== 3.2.3 Set Sports Mode Packet transmission interval ===
716 716  
717 717  
718 -Set Transport Mode packet transmit interval
545 +Set sports packet transmit interval
719 719  
720 -* (% style="color:blue" %)**AT Command:**
547 +* AT Command:
721 721  
722 -(% style="color:#037691" %)**AT+MTDC=xx. **
549 +AT+MTDC=xx.
723 723  
724 -Example:  AT+MTDC=300000  **~-~->    ** Set Transport Mode Packet Interval to 300 seconds. TrackerD will send every 300 seconds in Transport mode, Default Value: 300000
551 + Example:  AT+MTDC=300000  **~-~->    ** Set Sports Mode Packet Interval to 300 seconds. TrackerD will send every 300 seconds in Sports mode, Default Value: 300000
725 725  
726 726  
727 -* (% style="color:blue" %)**Downlink Payload (prefix 0x03):**
554 +* Downlink Payload (prefix 0x03):
728 728  
729 -(% style="color:#037691" %)**0x03 00 01 2C**  (%%) ~/~/  Same as AT+ MTDC=3000000
556 +0x03 00 01 2C  ~/~/  Same as AT+ MTDC=3000000
730 730  
731 731  
732 732  
... ... @@ -735,47 +735,50 @@
735 735  
736 736  Server send downlink command to exit Alarm mode
737 737  
738 -* (% style="color:blue" %)**AT Command: No AT Command**
565 +* AT Command:
739 739  
740 -* (% style="color:blue" %)**Downlink Payload (prefix 0x02):**
567 +No AT Command
741 741  
742 -(% style="color:#037691" %)**0x02 01**    (%%) ~/~/  Exit Alarm Mode
743 743  
570 +* Downlink Payload (prefix 0x02):
744 744  
572 +0x02 01  ~/~/  Exit Alarm Mode
745 745  
574 +
575 +
746 746  === 3.2.5 Disable/Enable LED flash ===
747 747  
748 748  
749 749  Disable/Enable LED for position, downlink and uplink
750 750  
751 -* (% style="color:blue" %)**AT Command:**
581 +* AT Command:
752 752  
753 -(% style="color:#037691" %)**AT+LON=xx.  (Disable (0), Enable (1), default:1)**
583 +AT+LON=xx.  (Disable (0), Enable (1), default:1)
754 754  
755 -Example: AT+LON=0  **~-~-> ** Disable LED for position, downlink and uplink.
585 + Example: AT+LON=0  **~-~-> ** Disable LED for position, downlink and uplink.
756 756  
757 757  
758 -* (% style="color:blue" %)**Downlink Payload (prefix 0xAE):**
588 +* Downlink Payload (prefix 0xAE):
759 759  
760 -(% style="color:#037691" %)**0xAE 00 ** (%%) ~/~/  Same as AT+LON=0
590 +0xAE 00  ~/~/  Same as AT+LON=0
761 761  
762 762  
763 763  
764 -=== 3.2.6 Disable/Enable Transport Mode ===
594 +=== 3.2.6 Disable/Enable movement detect (Debug Only) ===
765 765  
766 766  
767 -Users can use this feature to enable/disable Transport Mode.
597 +User can use this feature to check and set thread hole of movement detect
768 768  
769 -* (% style="color:blue" %)**AT Command:**
599 +* AT Command:
770 770  
771 -(% style="color:#037691" %)**AT+INTWK=xx.  (Disable (0), Enable (1), default:0)**
601 +AT+INTWK=xx.  (Disable (0), Enable (1), default:0)
772 772  
773 -Example:  AT+ INTWK =1  **~-~->   ** Enable Transport Mode.
603 + Example:  AT+ INTWK =1  **~-~->   ** Enable detect movement.
774 774  
775 775  
776 -* (% style="color:blue" %)**Downlink Payload (prefix 0xAF):**
606 +* Downlink Payload (prefix 0xAF):
777 777  
778 -(% style="color:#037691" %)**0xAF 01 ** (%%) ~/~/  Same as AT+ INTWK =1
608 +0xAF 01  ~/~/  Same as AT+ INTWK =1
779 779  
780 780  
781 781  
... ... @@ -782,41 +782,38 @@
782 782  === 3.2.7 Set Positioning Mode ===
783 783  
784 784  
785 -SMOD define the how TrackerD scan and uplink data:
615 +SMOD define the how TrackerD scan and uplink date.
786 786  
617 +GPS室外定位模式：  设备默认模式，设备入网后会发送device当前模式下的信息，随后立即定位发送数据包（默认是3分钟定位，超过将发送无效数据），如果出现意外情况下，快速按键3下，将会发出报警消息（默认每分钟发送一次）。GPS还有一种logdata模式，在断网的情况下将数据存储下来，等到有网的时候，一次将数据以每10秒上报。
787 787  
788 -* (% style="color:blue" %)**AT Command:**
619 +BLE室内定位模式：  设备入网后会发送device当前模式下的信息，随后立即定位发送数据包（默认是5秒，超过将发送无效数据），如果出现意外情况下，快速按键3下，将会发出报警消息（默认每3分钟发送一次）。
789 789  
790 -(% style="color:#037691" %)**AT+SMOD=aa,bb,cc**
621 +GPS和BLE混动模式：设备入网后会发送device当前模式下的信息，随后立即判断是否在室内，如果是就进行BLE定位，不是就GPS定位。如果出现意外情况下，快速按键3下，将会发出报警消息（默认每分钟发送一次）。
791 791  
792 -(% style="color:#037691" %)** aa:**
623 +运动模式：  设备入网后会发送device当前模式下的信息，随后发送GPS定位数据，设备判断是否在运动，没有运动传感器没有检测到动作，立即进入静止状态（默认20分钟），如果产生运动，将每5分钟发送一次数据，再第五分钟后检测设备有误运动，无将切换到静止状态，有立即发送数据。
793 793  
794 -* (% style="color:red" %)**1: GPS ONLY(Factory Settings):    **(%%)only get and uplink GPS location info.
795 -* (% style="color:red" %)**2: BLE ONLY:              **(%%)Only obtain iBeacon info via BLE and uplink. Design for Indoor tracking.
796 -* (% style="color:red" %)**3: GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.Devices will try to search BLE iBeacon first. If device can't find the iBeacon, it will use GPS for positioning.
797 797  
798 -(% style="color:#037691" %)**bb:**
799 799  
800 -* (% style="color:red" %)**0 :  **(%%)GPS+ BAT+ State+Tem&Hum
801 -* (% style="color:red" %)**1 :**(%%)  GPS +BAT State
627 +* AT Command:
802 802  
803 -(% style="color:#037691" %)**cc:   **
629 +AT+SMOD=xx.
804 804  
805 -* (% style="color:red" %)**1 : **(%%) (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State  
806 806  
807 -(% style="color:blue" %)**Example:**
632 + **Example:**
808 808  
809 - AT+ SMOD =1,0 ,0 ~-~->  GPS+ BAT+ State+Tem&Hum
810 - AT+ SMOD =1,1,0 ~-~->  GPS +BAT State
811 - AT+ SMOD =2,0,1 ~-~->  (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State
634 + AT+ SMOD =1,0  **~-~-> ** GPS+ BAT+ State+Tem&Hum
812 812  
636 + AT+ SMOD =1,1    **~-~->**  GPS +BAT State
813 813  
814 -* (% style="color:blue" %)**Downlink Payload (prefix 0xA5):**
638 + AT+ SMOD =2,3    **~-~->**  (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State。
815 815  
816 -(% style="color:#037691" %)**0xA5 01 00 00**    (%%) ~/~/  Same as AT+ SMOD =1,0,0
817 817  
641 +* Downlink Payload (prefix 0xA5):
818 818  
643 +0xA5 01 00  ~/~/  Same as AT+ SMOD =1,0
819 819  
645 +
646 +
820 820  === 3.2.8 Set MAX GPS position time ===
821 821  
822 822  
... ... @@ -826,20 +826,20 @@
826 826  If AT+FTIME=0. The GPS module will be always powered and positioning. This will highly increase the power consumption (up to 50mA). When AT+FTIME=0, it will improve fix accuracy and shorten the acquire time for next uplink.
827 827  
828 828  
829 -* (% style="color:blue" %)**AT Command:**
656 +* AT Command:
830 830  
831 -(% style="color:#037691" %)**AT+FTIME=xx**  (%%) **~-~-> ** Set to use xx as max fix time.
658 +AT+FTIME=xx  **~-~-> ** Set to use xx as max fix time.
832 832  
833 -**Example:**  AT+FTIME=150
660 +Example:  AT+FTIME=150
834 834  
835 835  
836 -* (% style="color:blue" %)**Downlink Payload (prefix 0xAA):**
663 +* Downlink Payload (prefix 0xAA):
837 837  
838 -(% style="color:#037691" %)**0xAA 00 96 ** (%%) ~/~/  Set AT+FTIME=150
665 +0xAA 00 96  ~/~/  Set AT+FTIME=150
839 839  
840 840  
841 841  
842 -=== 3.2.9 Set PDOP value for GPS fix accuracy ===
669 +=== 3.3.9 Set PDOP value for GPS fix accuracy ===
843 843  
844 844  
845 845  PDOP(Position Dilution of Precision) filter, TrackerD will only accept GPS data with a lower PDOP value than pre-configure PDOP value. If device can't get a valid GPS packet within FTIME timeout, it will use the GPS data with lowest PDOP value to server.
... ... @@ -848,26 +848,25 @@
848 848  A GPS packet with lower PDOP has higher accuracy. PDOP default value is 2.0
849 849  
850 850  
851 -* (% style="color:blue" %)**AT Command:**
678 +* AT Command:
852 852  
853 -(% style="color:#037691" %)**AT+PDOP=2.5 ** (%%) **~-~->  ** Set PDOP to 2.5
680 +AT+PDOP=2.5  **~-~->  ** Set PDOP to 2.5
854 854  
855 855  
856 -* (% style="color:blue" %)**Downlink Payload (prefix 0xAD):**
683 +* Downlink Payload (prefix 0xAD):
857 857  
858 -(% style="color:#037691" %)**0xAD 00 0A**   (%%) ~/~/  Set AT+PDOP=1  (0x0A / 10 =1)
685 +0xAD 00 0A  ~/~/  Set AT+PDOP=1  (0x0A / 10 =1)
859 859  
860 -(% style="color:#037691" %)**0xAD 00 19**   (%%) ~/~/  Set AT+PDOP=2.5    (0x19 / 10 =2.5)
687 +0xAD 00 19  ~/~/  Set AT+PDOP=2.5    (0x19 / 10 =2.5)
861 861  
862 -(% style="color:#037691" %)**0xAD 00 46**    (%%) ~/~/  Set AT+PDOP=7  (0x46 / 10 =7)
689 +0xAD 00 46  ~/~/  Set AT+PDOP=7  (0x46 / 10 =7)
863 863  
864 864  
865 -
866 866  Disable/Enable the confirmation mode
867 867  
868 -* (% style="color:blue" %)**AT Command:**
694 +* AT Command:
869 869  
870 -(% style="color:#037691" %)**AT+CFM=xx**
696 +AT+CFM=xx.
871 871  
872 872  
873 873  **~ Example:**
... ... @@ -877,33 +877,12 @@
877 877   AT+ CFM=1    **~-~->  ** Enable confirmation
878 878  
879 879  
880 -* (% style="color:blue" %)**Downlink Payload (prefix 0x05):**
706 +* Downlink Payload (prefix 0x05):
881 881  
882 -(% style="color:#037691" %)**0x05 01 **(%%) ~/~/  Same as AT+ SMOD =1
708 +0x05 01  ~/~/  Same as AT+ SMOD =1
883 883  
884 884  
885 885  
886 -=== 3.2.10  Auto Send None-ACK messages ===
887 -
888 -
889 -TrackerD will wait for ACK for each uplink, If TrackerD doesn't get ACK from the IoT server, it will consider the message doesn't arrive server and store it. TrackerD keeps sending messages in normal periodically. Once TrackerD gets ACK from a server, it will consider the network is ok and start to send the not-arrive message.
890 -
891 -
892 -* (% style="color:blue" %)**AT Command: AT+PNACKMD**
893 -
894 -The default factory setting is 0.
895 -
896 -
897 -**Command Example Function Response:**
898 -
899 -(% style="color:#037691" %)**AT+PNACKMD=1**  (%%) ~/~/  Poll None-ACK message OK
900 -
901 -
902 -* (% style="color:blue" %)**Downlink Command: 0x34**
903 -
904 -Example: 0x3401  ~/~/  Same as AT+PNACKMD=1
905 -
906 -
907 907  = 4. Setting for Different Scenarios =
908 908  
909 909  
... ... @@ -932,9 +932,11 @@
932 932  After installation of the driver and plug in TrackerD, user should be able to see com port in PC's device manager.
933 933  
934 934  
935 -(% style="color:blue" %)**Step3:  **(%%)Download and Install Flash Tool:  [[https:~~/~~/www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools>>url:https://www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools]]
740 +(% style="color:blue" %)**Step3：**(%%) Download and Install Flash Tool:
936 936  
742 +[[https:~~/~~/www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools>>url:https://www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools]]
937 937  
744 +
938 938  (% style="color:blue" %)**Step4:** (%%) Run Flash Download Tool and configure chip type to ESP32
939 939  
940 940  
... ... @@ -946,7 +946,7 @@
946 946  
947 947  (% style="color:blue" %)**Step5:** (%%) Select the firmware file (.bin format), com port and proper SPI configure. Clink Start. Bin file location:
948 948  
949 -[[https:~~/~~/github.com/dragino/TrackerD/releases>>https://github.com/dragino/TrackerD/releases]]
756 +[[https:~~/~~/www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0>>url:https://www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0]]
950 950  
951 951  
952 952  Users need to use below files:
... ... @@ -975,22 +975,22 @@
975 975  === 6.1.1 Set up ARDUINO compile environment ===
976 976  
977 977  
978 -* **Download the latest Arduino software (IDE) from the Arduino official website:  [[https:~~/~~/www.arduino.cc/en/Main/Software>>url:https://www.arduino.cc/en/Main/Software]]**
785 +* Download the latest Arduino software (IDE) from the Arduino official website:  [[https:~~/~~/www.arduino.cc/en/Main/Software>>url:https://www.arduino.cc/en/Main/Software]]
979 979  
980 -Install IDE on PC, open and click (% style="color:#037691" %)**File ~-~-> Preference**,(%%) add the following URL:  [[https:~~/~~/dl.espressif.com/dl/package_esp32_index.json>>url:https://links.jianshu.com/go?to=https%3A%2F%2Fdl.espressif.com%2Fdl%2Fpackage_esp32_index.json]]
787 +Install IDE on PC, open and click **File ~-~-> Preference**, add the following URL:  [[https:~~/~~/dl.espressif.com/dl/package_esp32_index.json>>url:https://links.jianshu.com/go?to=https%3A%2F%2Fdl.espressif.com%2Fdl%2Fpackage_esp32_index.json]]
981 981  
982 982  
983 983  [[image:1664503635019-941.png]]
984 984  
985 985  
793 +* Go to tools ~-~-> Boards ~-~-> Boards Manager, find the esp32 information and install it.
986 986  
987 -* (% style="color:#037691" %)**Go to tools ~-~-> Boards ~-~-> Boards Manager**,(%%) **find the esp32 information and install it.**
988 988  
989 989  [[image:1664503715811-892.png]]
990 990  
991 991  
992 992  
993 -* **Download the latest TrackerD from the dragino github: [[https:~~/~~/github.com/dragino/TrackerD>>url:https://github.com/dragino/TrackerD]]**
800 +* Download the latest TrackerD from the dragino github: [[https:~~/~~/github.com/dragino/TrackerD>>url:https://github.com/dragino/TrackerD]]
994 994  
995 995  Put the Library in the TrackerD directory into the libraries file in the Arduino directory:
996 996  
... ... @@ -1002,19 +1002,19 @@
1002 1002  == 6.2 Source Code ==
1003 1003  
1004 1004  
1005 -* (% style="color:blue" %)**Open the example in the TrackerD file, please select the correct port in the IDE, as shown below:**
812 +* Open the example in the TrackerD file, please select the correct port in the IDE, as shown below:
1006 1006  
1007 1007  [[image:1664503794261-827.png]]
1008 1008  
1009 1009  
1010 1010  
1011 -* (% style="color:blue" %)**Click to upload**
818 +* Click to upload
1012 1012  
1013 1013  [[image:1664503808294-336.png]]
1014 1014  
1015 1015  
1016 1016  
1017 -* (% style="color:blue" %)**Check the result, if the upload is successful, as shown below, open the serial port to view the data**
824 +* Check the result, if the upload is successful, as shown below, open the serial port to view the data
1018 1018  
1019 1019  [[image:1664503824081-592.png]] [[image:1664503831430-500.png]]
1020 1020  
... ... @@ -1026,7 +1026,7 @@
1026 1026  == 7.1 How to change the LoRa Frequency Bands/Region? ==
1027 1027  
1028 1028  
1029 -User can follow the introduction for [[how to upgrade image>>||anchor="H5.UploadFirmware"]]. When download the images, choose the required image file for download.
836 +User can follow the introduction for [[how to upgrade image>>path:#upgrade_image]]. When download the images, choose the required image file for download.
1030 1030  
1031 1031  
1032 1032  
... ... @@ -1037,8 +1037,8 @@
1037 1037  
1038 1038  
1039 1039  
1040 -(% border="1.5" cellspacing="3" style="background-color:#ffffcc; color:green; width:314px" %)
1041 -|=(% style="width: 118px;" %)**Pin**|=(% style="width: 67px;" %)**Color**|=(% style="width: 123px;" %)**USB Pin**
847 +(% border="2" style="background-color:#ffffcc; color:green; width:314px" %)
848 +|(% style="width:118px" %)**Pin**|(% style="width:67px" %)**Color**|(% style="width:123px" %)**USB Pin**
1042 1042  |(% style="width:118px" %)A4,B4,A9,B9|(% style="width:67px" %)Red|(% style="width:123px" %)VCC
1043 1043  |(% style="width:118px" %)A7,B7|(% style="width:67px" %)White|(% style="width:123px" %)D- (N/A)
1044 1044  |(% style="width:118px" %)A6,B6|(% style="width:67px" %)Green|(% style="width:123px" %)D+(N/A)
... ... @@ -1050,6 +1050,7 @@
1050 1050  
1051 1051  
1052 1052  
860 +
1053 1053  = 8.  Order Info =
1054 1054  
1055 1055  
... ... @@ -1067,15 +1067,16 @@
1067 1067  
1068 1068  
1069 1069  
878 +
1070 1070  = 9.  Packing Info =
1071 1071  
1072 1072  
1073 -(% style="color:#037691" %)**Package Includes**:
882 +**Package Includes**:
1074 1074  
1075 1075  * TrackerD LoRaWAN GPS/BLE Tracker x 1
1076 1076  * USB recharge & program cable x 1
1077 1077  
1078 -(% style="color:#037691" %)**Dimensions and Weight**:
887 +**Dimensions and Weight**:
1079 1079  
1080 1080  * Device Size: 85 x 48 x 15 cm
1081 1081  * Weight: 50g
... ... @@ -1086,7 +1086,7 @@
1086 1086  
1087 1087  
1088 1088  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1089 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]].
898 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]]
1090 1090  
1091 1091  
1092 1092  
... ... @@ -1096,5 +1096,3 @@
1096 1096  * [[**Firmware in Bin format**>>https://www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0]]
1097 1097  * **[[Source Code>>https://github.com/dragino/TrackerD]] **
1098 1098  * [[**Hardware Source**>>https://www.dropbox.com/sh/orwoy6cecb89m4e/AAD37sRuUrvKsHgAJxuVTkB5a?dl=0]]
1099 -
1100 -
1665301570342-765.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.6 KB
Content
1665301636888-168.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.6 KB
Content
1665301687277-443.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -22.6 KB
Content
1665301786397-168.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -22.6 KB
Content
image-20221006181316-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -17.7 KB
Content
image-20221006181357-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -88.0 KB
Content
image-20221009160220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -46.4 KB
Content
image-20221009160309-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -57.2 KB
Content
image-20221009234629-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -222.9 KB
Content
image-20221009234703-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -136.4 KB
Content