Skip to Content
Last modified by Xiaoling on 2025/04/27 16:48
From version 74.4
edited by Xiaoling
on 2022/10/11 09:52
Change comment: There is no comment for this version
To version 68.1
edited by Xiaoling
on 2022/10/09 16:03
Change comment: Uploaded new attachment "image-20221009160309-2.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -189,7 +189,6 @@
189 189  (% style="color:blue" %)**Step 3:**(%%) TrackerD will auto join to the LoRaWAN network. After join success, TrackerD will start to upload message to IoT server.
190 190  
191 191  
192 -
193 193  == 2.3  Positioning Mode(SMOD) ==
194 194  
195 195  
... ... @@ -209,7 +209,7 @@
209 209  === 2.4.1 Uplink FPORT~=5, Device Status ===
210 210  
211 211  
212 -Uplink the device configures with FPORT=5. Once TrackerD Joined the network, it will uplink this message to the server. After the first uplink, TrackerD will uplink Device Status every 12 hours.
211 +Uplink the device configures with FPORT=5. Once LGT92 Joined the network, it will uplink this message to the server. After first uplink, LHT52 will uplink Device Status every 12 hours.
213 213  
214 214  
215 215  (% border="1.5" style="background-color:#ffffcc; color:green; width:520px" %)
... ... @@ -219,13 +219,13 @@
219 219  [[image:1665301570342-765.png]]
220 220  
221 221  
222 -(% style="color:#037691" %)**Example of Device Status:**(%%) 13014001FF0FA24002
221 +Example Payload (FPort=5):  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT52%20-%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220621105116-11.png?rev=1.1||alt="image-20220621105116-11.png"]]
223 223  
224 -(% style="color:#037691" %)**Sensor Model:** (%%) For TrackerD,this value is 0x13
223 +**Sensor Model**: For TrackerD, this value is 0x13.
225 225  
226 -(% style="color:#037691" %)**Firmware Version: **(%%) 0x0140,Means:v1.4.0 version
225 +**Firmware Version**: 0x0100, Means: v1.0.0 version.
227 227  
228 -(% style="color:#037691" %)**Frequency Band**:
227 +**Frequency Band**:
229 229  
230 230  *0x01: EU868
231 231  
... ... @@ -247,55 +247,16 @@
247 247  
248 248  *0x0a: AS923-3
249 249  
250 -Sub- Band:value 0x00~~0x08(only forAU915,US915,Others are 0xFF)
249 +**Sub-Band**: value 0x00 ~~ 0x08(only for CN470, AU915,US915. Others are0x00)
251 251  
252 -(% style="color:#037691" %)**BAT:**(%%) shows the battery voltage for TrackerD.
251 +**BAT**: shows the battery voltage for TrackerD.
253 253  
253 +Ex1: 0x0B3A = 2874mV
254 254  
255 -(% style="color:#037691" %)**Ex1:**(%%) 0x0FA2 = 4002mV
256 -
257 257  Use can also get the Device Status uplink through the downlink command:
258 258  
259 -TrackerD Model：0x40
260 260  
261 -(% border="1.5" style="background-color:#ffffcc; color:green; width:314px" %)
262 -|(% style="width:75px" %)**Size(bit)**|(% style="width:64px" %)2bits|(% style="width:88px" %)2bit|(% style="width:84px" %)4bit
263 -|(% style="width:75px" %)**Value**|(% style="width:64px" %)SMOD|(% style="width:88px" %)GPS_MOD|(% style="width:84px" %)BLE_MOD
264 264  
265 -(% style="color:blue" %)**SMOD：**
266 -
267 -(% style="color:red" %)**1 :** (%%) GPS ONLY
268 -
269 -(% style="color:red" %)**2 :** (%%) BLE ONLY
270 -
271 -(% style="color:red" %)**3 :**  (%%) GPS/BLE Hybrid
272 -
273 -
274 -(% style="color:blue" %)**GPS MOD:**
275 -
276 -(% style="color:red" %)**0 : ** (%%) Enable uploading on-board Temperature and humidity values
277 -
278 -(% style="color:red" %)**1 :** (%%) Disable uploading on-board Temperature and humidity values
279 -
280 -
281 -(% style="color:blue" %)**BLE MOD:**
282 -
283 -(% style="color:red" %)**1: ** (%%) BLE Positioning with Strongest iBeacon
284 -
285 -TrackerD Status:  0x02
286 -
287 -(% border="1.5" style="background-color:#ffffcc; color:green; width:345px" %)
288 -|(% style="width:77px" %)**Size(bit)**|(% style="width:91px" %)1bits|(% style="width:48px" %)1bit|(% style="width:126px" %)1bit
289 -|(% style="width:77px" %)**Value**|(% style="width:91px" %)PNACKMD|(% style="width:48px" %)LON|(% style="width:126px" %)Transport** **Mode
290 -
291 -(% style="color:red" %)**0 : **(%%) Transport Mode
292 -
293 -(% style="color:red" %)**1 :  **(%%) AT+LON
294 -
295 -(% style="color:red" %)**2 : **(%%) Datalog Enable/Disable
296 -
297 -
298 -
299 299  === 2.4.2 Uplink FPORT~=2, Realtime GNSS Positioning + Temperature & Humidity ===
300 300  
301 301  
... ... @@ -323,8 +323,6 @@
323 323  |=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)1 bit|(% style="width:80px" %)1bit|(% style="width:50px" %)14bits
324 324  |=(% style="width: 72px;" %)**Value**|(% style="width:67px" %)reserve|(% style="width:118px" %)Alarm Indicate|(% style="width:63px" %)[[BAT>>||anchor="HBAT:"]] 
325 325  
326 -
327 -
328 328  ==== (% style="color:blue" %)**FLAG:**(%%) ====
329 329  
330 330  (% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:250px" %)
... ... @@ -339,8 +339,6 @@
339 339  * Latitude: 02863D68  ⇒  //if (0x//02863D68//& 0x80000000 = 0 )~://  //value = 02863D68 /1000000 = 42.351976//
340 340  * Longitude: FAC29BAF  ⇒ //if (0x//FAC29BAF// & 0x80000000 = 1 )~://  //value = (0x//FAC29BAF// – 0x 100000000)/1000000 =//-87.9094//57//
341 341  
342 -
343 -
344 344  (% style="color:red" %)**Important note:**
345 345  
346 346  1.  When power is low (<2.84v), GPS won't be able to get location info and GPS feature will be disabled and the location field will be filled with 0x0FFFFFFF, 0x0FFFFFFF.
... ... @@ -376,17 +376,6 @@
376 376  * 3.40v ~~ 3.69v:  20% ~~ 40%
377 377  * < 3.39v:  0~~20%
378 378  
379 -
380 -(% class="wikigeneratedid" %)
381 -==== (% style="color:blue" %)**MOD:**(%%) ====
382 -
383 -Set the format of GPS data uplink link
384 -
385 -0x00:  Enable uploading on-board Temperature and humidity values
386 -
387 -0x01:  Disable uploading on-board Temperature and humidity values
388 -
389 -
390 390  ==== (% style="color:blue" %)**LON:**(%%) ====
391 391  
392 392  Enable/Disable LED activity for uplink
... ... @@ -449,7 +449,7 @@
449 449  )))|4|4|2|1|1|1|1|1
450 450  |=**Value**|Latitude|Longitude|Year|Month|Day|Hous|Min|Sen
451 451  
452 -[[image:image-20221009160309-2.png]]
397 +[[image:image-20221009160220-1.png]]
453 453  
454 454  
455 455  
... ... @@ -483,11 +483,9 @@
483 483  * (% style="color:#037691" %)**Measured Power: ** (%%) The Measured Power from the strongest iBeacon.
484 484  * (% style="color:#037691" %)**RSSI:  ** (%%) The RSSI from the strongest iBeacon.
485 485  
431 +=== 2.4.5 Add Payload format in TTN V3 ===
486 486  
487 487  
488 -=== 2.4.6  Add Payload format in TTN V3 ===
489 -
490 -
491 491  In TTN V3, use can add a custom payload so it shows friendly.
492 492  
493 493  In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**
... ... @@ -537,21 +537,10 @@
537 537  
538 538  
539 539  
540 -== 2.7  Datalog Feature ==
483 +== 2.7 Datalog Feature ==
541 541  
542 -
543 543  total 273 entries,by default disable
544 544  
545 -
546 -Example use case.
547 -
548 -[[image:image-20221009234703-2.png||height="328" width="899"]]
549 -
550 -
551 -[[image:image-20221009234629-1.png||height="390" width="577"]]
552 -
553 -
554 -
555 555  == 2.8 Alarm Mode ==
556 556  
557 557  
... ... @@ -584,7 +584,6 @@
584 584  In Transport Mode, TrackerD will check if there is motion. If there is no motion, device will send uplinks every 20 minutes. If there is motion, device will send uplink every 5 minutes.
585 585  
586 586  
587 -
588 588  == 2.10 LED Status ==
589 589  
590 590  
... ... @@ -602,8 +602,6 @@
602 602  |(% style="width:157px" %)**Get Downlink**|(% style="width:271px" %)(% style="color:green" %)**GREEN**(%%) led on 1 second|(% style="width:202px" %)Yes
603 603  |(% style="width:157px" %)**Movement Detect**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)led on 500ms|(% style="width:202px" %)N/A
604 604  
605 -
606 -
607 607  == 2.11 Button Function ==
608 608  
609 609  
... ... @@ -625,8 +625,6 @@
625 625  |(% style="width:135px" %)Exit Alarm Mode|(% style="width:220px" %)Fast press the (% style="color:red" %)**RED** (%%)button 10 times|(% style="width:265px" %)Exit Alarm Mode
626 626  |(% style="width:135px" %)Enter Deep Sleep Mode|(% style="width:220px" %)Press and hold the button for 10 seconds, then quickly press the device 3 times to enter deep sleep|(% style="width:265px" %)This is the mode ship out from factory. CPU will be complete in sleep mode and no LoRa activity, only use before deploy.
627 627  
628 -
629 -
630 630  == 2.12 USB Port Function ==
631 631  
632 632  
... ... @@ -637,8 +637,6 @@
637 637  * [[Configure Device>>||anchor="H3.ConfigureTrackerDviaATcommandorLoRaWANdownlink"]]
638 638  * [[Upgrade Firmware>>||anchor="H5.UploadFirmware"]]
639 639  
640 -
641 -
642 642  = 3. Configure TrackerD via AT command or LoRaWAN downlink =
643 643  
644 644  
... ... @@ -842,7 +842,7 @@
842 842  
843 843  
844 844  
845 -=== 3.2.9 Set PDOP value for GPS fix accuracy ===
770 +=== 3.3.9 Set PDOP value for GPS fix accuracy ===
846 846  
847 847  
848 848  PDOP(Position Dilution of Precision) filter, TrackerD will only accept GPS data with a lower PDOP value than pre-configure PDOP value. If device can't get a valid GPS packet within FTIME timeout, it will use the GPS data with lowest PDOP value to server.
... ... @@ -928,7 +928,7 @@
928 928  
929 929  (% style="color:blue" %)**Step5:** (%%) Select the firmware file (.bin format), com port and proper SPI configure. Clink Start. Bin file location:
930 930  
931 -[[https:~~/~~/github.com/dragino/TrackerD/releases>>https://github.com/dragino/TrackerD/releases]]
856 +[[https:~~/~~/www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0>>url:https://www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0]]
932 932  
933 933  
934 934  Users need to use below files:
... ... @@ -965,7 +965,6 @@
965 965  [[image:1664503635019-941.png]]
966 966  
967 967  
968 -
969 969  * (% style="color:#037691" %)**Go to tools ~-~-> Boards ~-~-> Boards Manager**,(%%) **find the esp32 information and install it.**
970 970  
971 971  [[image:1664503715811-892.png]]
... ... @@ -1030,8 +1030,6 @@
1030 1030  |(% style="width:118px" %)A8|(% style="width:67px" %)Yellow|(% style="width:123px" %)MTMS/GPIO14
1031 1031  |(% style="width:118px" %)B8|(% style="width:67px" %)Grey|(% style="width:123px" %)MTDO/GPIO15
1032 1032  
1033 -
1034 -
1035 1035  = 8.  Order Info =
1036 1036  
1037 1037  
... ... @@ -1047,8 +1047,6 @@
1047 1047  * (% style="color:red" %)**AU915**(%%): Default frequency band AU915
1048 1048  * (% style="color:red" %)**US915**(%%): Default frequency band US915
1049 1049  
1050 -
1051 -
1052 1052  = 9.  Packing Info =
1053 1053  
1054 1054  
... ... @@ -1062,8 +1062,6 @@
1062 1062  * Device Size: 85 x 48 x 15 cm
1063 1063  * Weight: 50g
1064 1064  
1065 -
1066 -
1067 1067  = 10. Support =
1068 1068  
1069 1069  
... ... @@ -1070,8 +1070,6 @@
1070 1070  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1071 1071  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]].
1072 1072  
1073 -
1074 -
1075 1075  = 11.  Reference =
1076 1076  
1077 1077  
... ... @@ -1079,4 +1079,3 @@
1079 1079  * **[[Source Code>>https://github.com/dragino/TrackerD]] **
1080 1080  * [[**Hardware Source**>>https://www.dropbox.com/sh/orwoy6cecb89m4e/AAD37sRuUrvKsHgAJxuVTkB5a?dl=0]]
1081 1081  
1082 -
image-20221009234629-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -222.9 KB
Content
image-20221009234703-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -136.4 KB
Content