Skip to Content
Last modified by Xiaoling on 2025/04/27 16:48
From version 73.1
edited by Edwin Chen
on 2022/10/10 18:00
Change comment: There is no comment for this version
To version 49.1
edited by Xiaoling
on 2022/09/30 10:10
Change comment: Uploaded new attachment "1664503824081-592.png", version {1}

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Xiaoling
Content
... ... @@ -1,13 +7,6 @@
1 -(% style="text-align:center" %)
2 -[[image:1664505654417-133.png]]
3 -
4 -
5 -
6 -
7 7  (% class="wikigeneratedid" %)
8 8  **Table of Contents:**
9 9  
10 -{{toc/}}
11 11  
12 12  
13 13  
... ... @@ -14,10 +14,9 @@
14 14  
15 15  = 1.  Introduction =
16 16  
10 +== 1.1  OverView ==
17 17  
18 -== 1.1  What is TrackerD ==
19 19  
20 -
21 21  (((
22 22  TrackerD is an (% style="color:blue" %)**Open Source LoRaWAN Tracker**(%%) based on (% style="color:blue" %)**ESP32 MCU**(%%) and (% style="color:blue" %)**Semtech LoRa Wireless Chip**.
23 23  )))
... ... @@ -25,14 +25,10 @@
25 25  (((
26 26  In TrackerD, there are various sensors such as GPS, WiFi, BLE, Temperature, Humidity, Motion Detection, and Buzzer. User can use TrackerD for different tracking scenario.
27 27  
28 -(((
29 29  TrackerD is program friendly. Developers can use Arduino IDE to customize the software of TrackerD to fit their IoT solution.
30 -)))
31 31  
32 -(((
33 33  The LoRa wireless technology used in TrackerD allows the user to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional tracking services.
34 34  )))
35 -)))
36 36  
37 37  (((
38 38  TrackerD is equipped with a (% style="color:blue" %)**1000mAh Li-on rechargeable battery**(%%). Each TrackerD has a worldwide unique OTAA keys to join the LoRaWAN network.
... ... @@ -46,7 +46,6 @@
46 46  (% style="color:red" %)**Note: LoRaWAN server can be a general LoRaWAN server other than TTN.**
47 47  
48 48  
49 -
50 50  == 1.2 Specifications ==
51 51  
52 52  
... ... @@ -61,11 +61,13 @@
61 61  * EEPROM: 520 KB
62 62  * Clock Speed: 32Mhz
63 63  
51 +
64 64  (% style="color:blue" %)**Common DC Characteristics:**
65 65  
66 66  * Supply Voltage: 5V via USB port or Internal li-on battery
67 67  * Operating Temperature: -40 ~~ 60°C
68 68  
57 +
69 69  (% style="color:blue" %)**LoRa Spec:**
70 70  
71 71  * Frequency Range,
... ... @@ -87,10 +87,12 @@
87 87  * Packet engine up to 256 bytes with CRC.
88 88  * LoRaWAN 1.0.3 Specification
89 89  
79 +
90 90  (% style="color:blue" %)**Battery:**
91 91  
92 92  * 1000mA Li-on Battery power (for model TrackerD)
93 93  
84 +
94 94  (% style="color:blue" %)**Power Consumption**
95 95  
96 96  * Sleeping Mode: 200uA
... ... @@ -97,6 +97,9 @@
97 97  * LoRa Transmit Mode: 125mA @ 20dBm 44mA @ 14dBm
98 98  * Tracking: max: 38mA
99 99  
91 +
92 +
93 +
100 100  == 1.3  Features ==
101 101  
102 102  
... ... @@ -103,7 +103,7 @@
103 103  * LoRaWAN 1.0.3 Class A
104 104  * ESP32 PICO D4
105 105  * SX1276/78 Wireless Chip
106 -* Arduino IDE Compatible
100 +* Arduino IDE Compatible
107 107  * Open source hardware / software
108 108  * Regular/ Real-time GPS,BLE,WIFI tracking
109 109  * Built-in3 axis accelerometer (LIS3DH)
... ... @@ -115,6 +115,8 @@
115 115  * Tri-color LED, Alarm button
116 116  * Datalog
117 117  
112 +
113 +
118 118  == 1.4  Applications ==
119 119  
120 120  
... ... @@ -121,9 +121,11 @@
121 121  * Logistics and Supply Chain Management
122 122  * Human tracking
123 123  
124 -= 2.1 Use TrackerD =
125 125  
126 126  
122 +
123 += 2.1 Use TrackerD =
124 +
127 127  == 2.1 How it works? ==
128 128  
129 129  
... ... @@ -130,636 +130,490 @@
130 130  TrackerD is configured as LoRaWAN OTAA Class A GPS tracker by default. It has OTAA keys to join LoRaWAN network. To connect a LoRaWAN network, user need to input the OTAA keys in the LoRaWAN IoT server and push reset button of TrackerD (next to USB port). TrackerD will wake up and auto join the network via OTAA.
131 131  
132 132  
133 -
134 134  == 2.2 Quick guide to connect to LoRaWAN server ==
135 135  
133 +Here is an example for how to join the [[TTNv3 LoRaWAN Network>>url:https://eu1.cloud.thethings.network]]. Below is the network structure, we use LPS8N as LoRaWAN gateway in this example.
136 136  
137 -Here is an example for how to join the [[TTNv3 LoRaWAN Network>>url:https://eu1.cloud.thethings.network]]. Below is the network structure, we use LPS8N as LoRaWAN gateway in this example. 
138 138  
136 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image001.png]]
139 139  
140 -[[image:1664501652064-326.png]]
141 141  
142 -
143 -
144 144  The LPS8N is already set to connect to [[TTN V3 network >>url:https://eu1.cloud.thethings.network/]]. What the rest need to is register this device in TTN V3:
145 145  
141 +**(% style="color:blue" %)Step 1**:(%%) Create a device in TTN V3 with the OTAA keys from TrackerD.
146 146  
147 -(% style="color:blue" %)**Step 1**:(%%) Create a device in TTN V3 with the OTAA keys from TrackerD.
148 -
149 149  Each TrackerD is shipped with a sticker with the default device EUI as below:
150 150  
145 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image002.png]]
151 151  
152 -[[image:1664501677253-891.png]]
153 153  
154 154  
149 +
155 155  Input these keys to their LoRaWAN Server portal. Below is TTN V3 screen shot:
156 156  
157 157  
158 -**__Add APP EUI in the application:__**
153 +Add APP EUI in the application
159 159  
155 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image003.png]]
160 160  
161 -[[image:1664501711466-918.png]]
157 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image004.png]]
162 162  
163 163  
160 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image005.png]]
164 164  
165 -[[image:1664501721248-725.png]]
166 166  
167 167  
168 -[[image:1664501734705-405.png]]
164 +Add APP KEY and DEV EUI
169 169  
166 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image006.png]]
170 170  
171 171  
172 -**__Add APP KEY and DEV EUI:__**
173 173  
174 174  
175 -[[image:1664501784668-703.png]]
171 +**(% style="color:blue" %)Step 2**:(%%) Power on TrackerD by using the on board switch.
176 176  
177 177  
174 +**(% style="color:blue" %)Step 3:**(%%) TrackerD will auto join to the LoRaWAN network. After join success, TrackerD will start to upload message to IoT server.
178 178  
179 179  
180 -(% style="color:blue" %)**Step 2**:(%%) Power on TrackerD by using the on board switch.
177 +**(% style="color:blue" %)Positioning Mode(SMOD):**
181 181  
179 +* **GPS ONLY(Factory Settings): **only get GPS location info.
180 +* **BLE ONLY: **Only obtain iBeacon info via BLE. Design for Indoor tracking.
181 +* **GPS/BLE Hybrid: **Combination for Indoor and Outdoor tracking.
182 182  
183 -(% style="color:blue" %)**Step 3:**(%%) TrackerD will auto join to the LoRaWAN network. After join success, TrackerD will start to upload message to IoT server.
183 +User can switch modes by [[changing SMOD>>path:#Positioning_Mode]].
184 184  
185 185  
186 +== 2.3 Uplink Payload ~-~-~-~-~-~-~-~-~-~-~-~-~-~- ==
186 186  
187 -== 2.3  Positioning Mode(SMOD) ==
188 188  
189 +=== 2.3.1 Uplink FPORT=5, Device Status ===
189 189  
190 -Users can set TrackerD to different Positioning Mode for different applications. Below mod are supported.
191 191  
192 -* (% style="color:#037691" %)**GPS ONLY(Factory Settings):    **(%%)only get and uplink GPS location info.
193 -* (% style="color:#037691" %)**BLE ONLY:              **(%%)Only obtain iBeacon info via BLE and uplink. Design for Indoor tracking.
194 -* (% style="color:#037691" %)**GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.Devices will try to search BLE iBeacon first. If device can't find the iBeacon, it will use GPS for positioning.
195 195  
196 -Users can switch modes by [[changing SMOD>>||anchor="H3.2.7SetPositioningMode"]].
193 +=== 2.3.2 Uplink FPORT= , Realtime GNSS Positioning ===
197 197  
195 +The default uplink payload includes totally 11 bytes. (User can use AT+MOD=0 to enable the Temperature and humidity sensor to hum/tem info from accelerometer. When accelerometer info is enable, total payload will be 15 bytes, please note 15 bytes won’t work on DR0 on US915/AU915 frequency band. )
198 198  
199 199  
200 -== 2.4  Uplink Payload ==
198 +|(((
199 +**Size**
201 201  
201 +**(bytes)**
202 +)))|4|4|2|1|(((
203 +2
202 202  
203 -=== 2.4.1 Uplink FPORT~=5, Device Status ===
204 -
205 -
206 -Uplink the device configures with FPORT=5. Once LGT92 Joined the network, it will uplink this message to the server. After first uplink, LHT52 will uplink Device Status every 12 hours.
207 -
208 -
209 -(% border="1.5" style="background-color:#ffffcc; color:green; width:520px" %)
210 -|=(% scope="row" style="width: 108px;" %)**Size(bytes)**|=(% style="width: 82px;" %)**1**|=(% style="width: 83px;" %)**2**|=(% style="width: 94px;" %)**1**|=(% style="width: 84px;" %)**1**|=(% style="width: 44px;" %)2|=(% style="width: 63px;" %)**2**|=(% style="width: 60px;" %)1
211 -|=(% style="width: 108px;" %)**Value**|(% style="width:82px" %)Sensor Model|(% style="width:83px" %)Firmware Version|(% style="width:94px" %)Frequency Band|(% style="width:84px" %)Sub-band|(% style="width:44px" %)BAT|(% style="width:63px" %)SMOD|(% style="width:60px" %)Status
212 -
213 -[[image:1665301570342-765.png]]
214 -
215 -
216 -Example Payload (FPort=5):  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT52%20-%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220621105116-11.png?rev=1.1||alt="image-20220621105116-11.png"]]
217 -
218 -**Sensor Model**: For TrackerD, this value is 0x13.
219 -
220 -**Firmware Version**: 0x0100, Means: v1.0.0 version.
221 -
222 -**Frequency Band**:
223 -
224 -*0x01: EU868
225 -
226 -*0x02: US915
227 -
228 -*0x03: IN865
229 -
230 -*0x04: AU915
231 -
232 -*0x05: KZ865
233 -
234 -*0x06: RU864
235 -
236 -*0x07: AS923
237 -
238 -*0x08: AS923-1
239 -
240 -*0x09: AS923-2
241 -
242 -*0x0a: AS923-3
243 -
244 -**Sub-Band**: value 0x00 ~~ 0x08(only for CN470, AU915,US915. Others are0x00)
245 -
246 -**BAT**: shows the battery voltage for TrackerD.
247 -
248 -Ex1: 0x0B3A = 2874mV
249 -
250 -Use can also get the Device Status uplink through the downlink command:
251 -
252 -
253 -
254 -=== 2.4.2 Uplink FPORT~=2, Realtime GNSS Positioning + Temperature & Humidity ===
255 -
256 -
257 -User can use **AT+SMOD=1,0** to enable uploading on-board Temperature and humidity values, and the total payload will be 15 bytes, please note that 15 bytes won't work on DR0 on US915/AU915 frequency band.
258 -
259 -
260 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:480px" %)
261 -|=(% scope="row" style="width: 50px;" %)(((
262 -**Size(bytes)**
263 -)))|(% style="width:60px" %)4|(% style="width:70px" %)4|(% style="width:80px" %)2|(% style="width:73px" %)1|(% style="width:40px" %)(((
205 +(optional )
206 +)))|(((
264 264  2
265 -)))|(% style="width:87px" %)(((
266 -2
208 +
209 +(optional)
267 267  )))
268 -|=(% style="width: 69px;" %)**Value**|(% style="width:76px" %)[[Latitude>>||anchor="HLocationinfo:"]]|(% style="width:87px" %)[[Longitude>>||anchor="HLocationinfo:"]]|(% style="width:76px" %)(((
269 -[[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
270 -)))|(% style="width:73px" %)[[FLAG>>||anchor="HFLAG:"]]|(% style="width:40px" %)[[Hum>>||anchor="HHum:"]]|(% style="width:87px" %)[[Tem>>||anchor="HTem:"]]
211 +|**Value**|[[Latitude>>path:#Location]]|[[Longitude>>path:#Location]]|(((
212 +[[Alarm &>>path:#Alarm]]
271 271  
272 -[[image:1665301636888-168.png]]
214 +[[BAT>>path:#Alarm]]
215 +)))|[[FLAG>>path:#Flag]]|Hum|[[Tem>>path:#Pitch]]
273 273  
274 274  
275 -==== (% style="color:blue" %)**Alarm & BAT:**(%%) ====
218 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image007.png]]
276 276  
277 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:250px" %)
278 -|=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)1 bit|(% style="width:80px" %)1bit|(% style="width:50px" %)14bits
279 -|=(% style="width: 72px;" %)**Value**|(% style="width:67px" %)reserve|(% style="width:118px" %)Alarm Indicate|(% style="width:63px" %)[[BAT>>||anchor="HBAT:"]] 
280 280  
281 -==== ====
221 +**Alarm & BAT:**
282 282  
283 -==== ====
223 +|**Size(bit)**|1 bit|1bit|14 bits
224 +|**Value**|reserve|Alarm Indicate|[[BAT>>path:#BAT]]
284 284  
285 -==== (% style="color:blue" %)**FLAG:**(%%) ====
226 +**FLAG:**
286 286  
287 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:250px" %)
288 -|=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)2bits|(% style="width:50px" %)1bit
289 -|=(% style="width: 79px;" %)**Value**|(% style="width:55px" %)[[MOD>>||anchor="H3.2.7SetPositioningMode"]]|(% style="width:47px" %)[[LON>>||anchor="HLON:"]]
228 +|**Size(bit)**|2 bits|1bit|5 bits
229 +|**Value**|[[MOD>>path:#MD]]|[[LON>>path:#LON]]|Firmware version
290 290  
291 -**Example:** Payload: 0x02863D68 FAC29BAF 4B45 60 0202 011A 
292 292  
293 293  
294 -==== (% style="color:blue" %)**Location info:**(%%) ====
233 +**Example: Payload: 0x02863D68 FAC29BAF 4B45 60 0202 011A **
295 295  
296 -* Latitude: 02863D68  ⇒  //if (0x//02863D68//& 0x80000000 = 0 )~://  //value = 02863D68 /1000000 = 42.351976//
297 -* Longitude: FAC29BAF  ⇒ //if (0x//FAC29BAF// & 0x80000000 = 1 )~://  //value = (0x//FAC29BAF// – 0x 100000000)/1000000 =//-87.9094//57//
298 298  
299 -(% style="color:red" %)**Important note:**
236 +**Location info:**
300 300  
301 -1.  When power is low (<2.84v), GPS won't be able to get location info and GPS feature will be disabled and the location field will be filled with 0x0FFFFFFF, 0x0FFFFFFF.
238 +* Latitude: 02863D68⇒ //if (0x//02863D68//& 0x80000000 = 0 )~://
302 302  
303 -2.  In this mode, the total payload will be 15 bytes, while US915/AU915 DR0 accepts only 11 bytes payload. In this case, the payload on server will be ignore and shows as below:
240 +//value = 02863D68 /1000000 = 42.351976//
304 304  
242 +* Longitude: FAC29BAF ⇒ //if (0x//FAC29BAF// & 0x80000000 = 1 )~://
305 305  
306 -[[image:1664502116362-706.png]]
244 +//value = (0x//FAC29BAF// – 0x 100000000)/1000000 =//-87.9094//57//
307 307  
308 308  
309 -3.  While GPS can't get location info after timeout(FTIME Parameter), the latitude and longitude will be filled with all 0x00:
247 +Important note:
310 310  
311 -[[image:1664502166010-515.png]]
249 +1. When power is low (<2.84v), GPS won’t be able to get location info and GPS feature will be disabled and the location field will be filled with 0x0FFFFFFF, 0x0FFFFFFF.
250 +1. In firmware version v1.5, Roll & Pitch is disabled by default.
251 +1. When enable 9-axis motion sensor, the total payload will be 15 bytes, while US915/AU915 DR0 accept only 11 bytes payload. In this case, the payload on server will be ignore and shows as below:
312 312  
253 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image008.png]]
313 313  
314 314  
315 -==== (% style="color:blue" %)**Alarm:**(%%) ====
256 +1. While GPS can’t get location info after timeout(FTIME Parameter), the latitude and longitude will be filled with all 0x00:
316 316  
317 -Example:  0x4B & 0x40 >> 6 = 0x01
258 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image009.png]]
318 318  
260 +* **Alarm**: Example: 0x4B & 0x40 >> 6 = 0x01
261 +* **BAT**: Example: 0x0CDD & 0x3FFF ⇒ 3293 (mV).
319 319  
263 +The battery info shows the current voltage, for **TrackerD** version which powered by li-on battery. User can use below mapping to indicate the battery in percentage: \
320 320  
321 -==== (% style="color:blue" %)**BAT:**(%%) ====
322 322  
323 -Example:  0x0CDD & 0x3FFF ⇒ 3293 (mV).
266 +* > 4.0v : 80% ~~ 100%
267 +* 3.85v ~~3.99v: 60% ~~ 80%
268 +* 3.70v ~~ 3.84v: 40% ~~ 60%
269 +* 3.40v ~~ 3.69v: 20% ~~ 40%
270 +* < 3.39v: 0~~20%
324 324  
325 -(((
326 -The battery info shows the battery voltage, User can use the below mapping to indicate the battery in percentage: \
327 -)))
328 328  
329 -* > 4.0v :  80% ~~ 100%
330 -* 3.85v ~~3.99v:  60% ~~ 80%
331 -* 3.70v ~~ 3.84v:  40% ~~ 60%
332 -* 3.40v ~~ 3.69v:  20% ~~ 40%
333 -* < 3.39v:  0~~20%
273 +* **LON: **Enable/Disable LED activity for uplink
334 334  
335 -==== (% style="color:blue" %)**LON:**(%%) ====
275 +0x00: Disable LED indicator.
336 336  
337 -Enable/Disable LED activity for uplink
277 +0x01: Enable LED indicator (Default Value)
338 338  
339 -(((
340 -0x00:  Disable LED indicator.
341 -)))
342 342  
343 -(((
344 -0x01:  Enable LED indicator (Default Value)
345 -)))
280 +* **Hum**: 0202 = //if (0x0202 & 0x8000 = 0 ): value =// 0x0202 / 100 = +514 ⇒ 51.4 degree
281 +* **//Tem//**//: 011A =if (0x011A & 0x8000 = 1 ): value =( 0x011A - 0x10000)/10(dec) ⇒ -//28.2 degree
346 346  
347 347  
348 -==== (% style="color:blue" %)**Hum:**(%%) ====
349 349  
350 -0202 = //if (0x0202 & 0x8000 = 0 ):  value =// 0x0202 / 100 = +514 ⇒ 51.4 degree
285 +=== 2.3.3 Uplink FPORT= , History GNSS Positioning ===
351 351  
352 352  
353 -==== (% style="color:blue" %)**Tem:**(%%) ====
354 354  
355 -011A =if (0x011A & 0x8000 = 1 ):  value =( 0x011A - 0x10000)/10(dec) ⇒ -//28.2 degree//
289 +=== 2.3.4 BLE positioning Payload(Fport=2) ===
356 356  
291 +Different MODE has different payload:
357 357  
293 +**MODE=2**
358 358  
359 -=== 2.4.3  Uplink FPORT~=3, Realtime GNSS Positioning (Default Mode) ===
295 +|(((
296 +**Size**
360 360  
298 +**(bytes)**
299 +)))|16|4|4|2|4|2|1
300 +|**Value**|[[UUID>>path:#Location]]|(((
301 +iBeacon
361 361  
362 -The default uplink payload includes totally 11 bytes. The payload is the first 11 bytes of Uplink FPORT=2, real-time GNSS positioning, (remove the temp and humidity)
303 +MAJOR
304 +)))|(((
305 +iBeacon
363 363  
307 +MINOR
308 +)))|(((
309 +iBeacon Measured
364 364  
365 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:480px" %)
366 -|=(% scope="row" style="width: 50px;" %)(((
367 -**Size(bytes)**
368 -)))|(% style="width:60px" %)4|(% style="width:70px" %)4|(% style="width:80px" %)2|(% style="width:73px" %)1
369 -|=(% style="width: 69px;" %)**Value**|(% style="width:76px" %)[[Latitude>>||anchor="HLocationinfo:"]]|(% style="width:87px" %)[[Longitude>>||anchor="HLocationinfo:"]]|(% style="width:76px" %)(((
370 -[[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
371 -)))|(% style="width:73px" %)[[FLAG>>||anchor="HFLAG:"]]
311 +Power
312 +)))|(((
313 +iBeacon
372 372  
373 -(% class="wikigeneratedid" %)
374 -[[image:1665301687277-443.png]]
315 +RSSI
316 +)))|(((
317 +[[Alarm &>>path:#Alarm]]
375 375  
319 +[[BAT>>path:#Alarm]]
320 +)))|[[FLAG>>path:#Flag]]
376 376  
377 377  
378 -=== 2.4.4  Uplink FPORT~=4, History GNSS Positioning ===
323 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image010.png]]
379 379  
380 380  
381 -Set [[PNACKMD=1>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H4.13AutoSendNone-ACKmessages]], and TrackerD will wait for ACK for every uplink, when there is no LoRaWAN network, TrackerD will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
326 +* **BAT**: Ex1: 0x4B45 & 0x3FFF ⇒ 3901 (mV).
327 +* **MODE: **Define the payload format.
328 +* **UUID: **The uuid from the strongest iBeacon.
329 +* **MAJOR**: The MAJOR from the strongest iBeacon.
330 +* **MINOR**: The MAJOR from the strongest iBeacon.
331 +* **Measured** **Power**: The Measured Power from the strongest iBeacon.
332 +* **RSSI**: The RSSI from the strongest iBeacon.
382 382  
383 383  
384 -(% style="color:red" %)**Note for this mode:**
385 385  
386 -* a) TrackerD will do an ACK check for data records sending to make sure every data arrive server.
387 -* b) TrackerD will send data in (% style="color:blue" %)**CONFIRMED Mode**(%%) when PNACKMD=1, but TrackerD won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink, if TrackerD gets an ACK, TrackerD will consider there is a network connection and resend all NONE-ACK Messages.
336 +=== 2.3.5 Add Payload format in TTN V3 ===
388 388  
389 -The payload is 15 bytes, as below.
390 -
391 -(% border="1.5" style="background-color:#ffffcc; color:green; width:520px" %)
392 -|=(% scope="row" %)(((
393 -**Size(bytes)**
394 -)))|4|4|2|1|1|1|1|1
395 -|=**Value**|Latitude|Longitude|Year|Month|Day|Hous|Min|Sen
396 -
397 -[[image:image-20221009160309-2.png]]
398 -
399 -
400 -
401 -=== 2.4.5  Uplink FPORT~=6, BLE Positioning with Strongest iBeacon ===
402 -
403 -
404 -(% border="1.5" cellspacing="3" style="background-color:#ffffcc; color:green; width:450px" %)
405 -|=(% scope="row" style="width: 60px;" %)(((
406 -**Size(bytes)**
407 -)))|(% style="width:30px" %)16|(% style="width:50px" %)4|(% style="width:50px" %)4|(% style="width:120px" %)2|(% style="width:50px" %)4|(% style="width:50px" %)2|(% style="width:30px" %)1
408 -|=(% style="width: 50px;" %)**Value**|(% style="width:44px" %)[[UUID>>||anchor="HLocationinfo:"]]|(% style="width:61px" %)(((
409 -iBeacon MAJOR
410 -)))|(% style="width:63px" %)(((
411 -iBeacon MINOR
412 -)))|(% style="width:71px" %)(((
413 -iBeacon Measured Power
414 -)))|(% style="width:50px" %)(((
415 -iBeacon RSSI
416 -)))|(% style="width:47px" %)(((
417 -[[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
418 -)))|(% style="width:15px" %)[[FLAG>>||anchor="HFLAG:"]]
419 -
420 -[[image:1664502425687-834.png]]
421 -
422 -
423 -* (% style="color:#037691" %)**BAT: ** (%%) Ex1: 0x4B45 & 0x3FFF ⇒ 3901 (mV).
424 -* (% style="color:#037691" %)**MODE:   **(%%)Define the payload format.
425 -* (% style="color:#037691" %)**UUID:     **(%%)The uuid from the strongest iBeacon.
426 -* (% style="color:#037691" %)**MAJOR:** (%%) The MAJOR from the strongest iBeacon.
427 -* (% style="color:#037691" %)**MINOR:**  (%%)The MAJOR from the strongest iBeacon.
428 -* (% style="color:#037691" %)**Measured Power: ** (%%) The Measured Power from the strongest iBeacon.
429 -* (% style="color:#037691" %)**RSSI:  ** (%%) The RSSI from the strongest iBeacon.
430 -
431 -=== 2.4.6  Add Payload format in TTN V3 ===
432 -
433 -
434 434  In TTN V3, use can add a custom payload so it shows friendly.
435 435  
436 -In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**
340 +In the page Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder
437 437  
342 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image011.png]]
438 438  
439 -[[image:1664502649601-895.png]]
440 -
441 -
442 442  Add the decoder from this link:
443 443  
444 444  
445 445  Save the change the uplink message will be parsed. As below:
446 446  
447 -[[image:1664502676891-606.png]]
349 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image012.png]]
448 448  
449 449  
450 450  
451 -== 2.5 Integrate with Datacake ==
452 452  
453 453  
454 -(((
455 -After TrackerD sends data to LoRaWAN server such as TTN, use can pass the data to Datacake and plot out, currently only support GPS plot.
456 -)))
355 +== 2.4 Integrate with Datacake ==
457 457  
458 -(((
459 -Instruction is here:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20Data%20Cake/#H7.Example~~-~~-AddTrackerDGPSTrackingInDataCake>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20Data%20Cake/#H7.Example--AddTrackerDGPSTrackingInDataCake]]
460 -)))
461 461  
358 +After TrackerD sends data to LoRaWAN server such as TTN, use can pass the data to Datacake and plot out, currently only support GPS plot.
462 462  
463 -[[image:1664502695771-538.png]]
360 +Instruction is here: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20Data%20Cake/#H7.Example~~-~~-AddTrackerDGPSTrackingInDataCake>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20Data%20Cake/#H7.Example--AddTrackerDGPSTrackingInDataCake]]
464 464  
362 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image013.png]]
465 465  
466 466  
467 -== 2.6 Integrate with Tago ==
365 +== 2.5 Integrate with Tago ==
468 468  
469 469  
470 -(((
471 471  After TrackerD sends data to LoRaWAN server such as TTN, use can pass the data to Datacake and plot out, currently only support GPS plot.
472 -)))
473 473  
474 -(((
475 475  Instruction is here: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Tago.IO/#H3.A0Example-CreateTrackerD2FLGT92positioningwidget>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Tago.IO/#H3.A0Example-CreateTrackerD2FLGT92positioningwidget]]
476 -)))
477 477  
372 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image014.png]]
478 478  
479 -[[image:1664502715371-321.png]]
480 480  
481 481  
482 482  
483 -== 2.7  Datalog Feature ==
377 +== 2.6 Alarm Mode ==
484 484  
485 485  
486 -total 273 entries,by default disable
380 +User can push the **RED button** by more than 5 seconds to enter Alarm Mode.
487 487  
488 488  
489 -Example use case.
383 +Once enter Alarm mode, the **GREEN LED** will flash 3 times, the buzzer will alarm for 5 seconds, then TrackerD will immediately send a packet without location info and then send a data packet with GPS positioning information. After that, the device will send 60 packets at 1-minute intervals. The Alarm flag in the payload will be set for the next 60 packets unless exit alert mode.
490 490  
491 -[[image:image-20221009234703-2.png||height="328" width="899"]]
492 492  
493 -
494 -[[image:image-20221009234629-1.png||height="390" width="577"]]
495 -
496 -
497 -
498 -== 2.8 Alarm Mode ==
499 -
500 -
501 -(((
502 -User can push the (% style="color:red" %)**RED button**(%%) by more than 5 seconds to enter Alarm Mode.
503 -)))
504 -
505 -
506 -(((
507 -Once enter Alarm mode, the (% style="color:green" %)**GREEN LED**(%%) will flash 3 times, the buzzer will alarm for 5 seconds, then TrackerD will immediately send a packet without location info and then send a data packet with GPS positioning information. After that, the device will send 60 packets at 1-minute intervals. The Alarm flag in the payload will be set for the next 60 packets unless exit alert mode.
508 -)))
509 -
510 -
511 -(((
512 512  Two ways to exit alarm mode:
513 -)))
514 514  
515 515  * Server send a downlink command to exit.
516 516  * User fast press the RED button 10 times.
517 517  
518 -(((
519 -When exit alarm mode, (% style="color:red" %)**RED LED**(%%) will light up for 5 seconds, indicating that the alarm mode is exited. And the alert flag will be set to false.
520 -)))
391 +When exit alarm mode, **RED LED** will light up for 5 seconds, indicating that the alarm mode is exited. And the alert flag will be set to false.
521 521  
522 522  
394 +== 2.7 Sports Mode ~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-- ==
523 523  
524 -== 2.9 Transport Mode ==
525 525  
526 526  
527 -In Transport Mode, TrackerD will check if there is motion. If there is no motion, device will send uplinks every 20 minutes. If there is motion, device will send uplink every 5 minutes.
398 +== 2.8 LED Status ==
528 528  
529 529  
401 +|**Event**|**Action**|**AT+LON to control on/off**
402 +|**Power On**|**BLUE, RED , Green** flash once|N/A
403 +|**Join request**|**Green** led fast blink once (200ms)|Yes
404 +|**Join Success**|**Green** led on 5 second|N/A
405 +|**Fixing Location**|**BLUE **blinks 200ms per second|Yes
406 +|**Fixed and uplink**|**GREEN **blinks twice (200ms per blink)|Yes
407 +|**Fail Fix and uplink**|**RED **blinks twice (200ms per blink)|Yes
408 +|**Enter Alarm mode**|**RED **on for 3 seconds|Yes
409 +|**Uplink under Alarm**|**RED **on for 1 second|Yes
410 +|**Exit Alarm**|**BLUE **led on 5 second|Yes
411 +|**Get Downlink**|**GREEN** led on 1 second|Yes
412 +|**Movement Detect**|**RED **on 500ms|N/A
530 530  
531 -== 2.10 LED Status ==
532 532  
533 533  
534 -(% border="1.5" style="background-color:#ffffcc; color:green; width:500px" %)
535 -|=(% style="width: 150px;" %)**Event**|=(% style="width: 200px;" %)**Action**|=(% style="width: 150px;" %)**AT+LON to control on/off**
536 -|(% style="width:157px" %)**Power On**|(% style="width:271px" %)(% style="color:blue" %)**BLUE, **(% style="color:red" %)**RED , **(% style="color:green" %)**Green** flash once|(% style="width:202px" %)N/A
537 -|(% style="width:157px" %)**Join request**|(% style="width:271px" %)(% style="color:green" %)**Green** (%%)led fast blink once (200ms)|(% style="width:202px" %)Yes
538 -|(% style="width:157px" %)**Join Success**|(% style="width:271px" %)(% style="color:green" %)**Green**(%%) led on 5 second|(% style="width:202px" %)N/A
539 -|(% style="width:157px" %)**Fixing Location**|(% style="width:271px" %)(% style="color:blue" %)**BLUE **(%%)blinks 200ms per second|(% style="width:202px" %)Yes
540 -|(% style="width:157px" %)**Fixed and uplink**|(% style="width:271px" %)(% style="color:green" %)**GREEN ***(%%)***blinks twice (200ms per blink)**|(% style="width:202px" %)Yes
541 -|(% style="width:157px" %)**Fail Fix and uplink**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)blinks twice (200ms per blink)|(% style="width:202px" %)Yes
542 -|(% style="width:157px" %)**Enter Alarm mode**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)on for 3 seconds|(% style="width:202px" %)Yes
543 -|(% style="width:157px" %)**Uplink under Alarm**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)on for 1 second|(% style="width:202px" %)Yes
544 -|(% style="width:157px" %)**Exit Alarm**|(% style="width:271px" %)(% style="color:blue" %)**BLUE **(%%)led on 5 second|(% style="width:202px" %)Yes
545 -|(% style="width:157px" %)**Get Downlink**|(% style="width:271px" %)(% style="color:green" %)**GREEN**(%%) led on 1 second|(% style="width:202px" %)Yes
546 -|(% style="width:157px" %)**Movement Detect**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)led on 500ms|(% style="width:202px" %)N/A
547 547  
548 -== 2.11 Button Function ==
549 549  
418 +== 2.9 Button Function ==
550 550  
551 -(% style="color:blue" %)**RESET button:**
420 +**RESET button:**
552 552  
553 -[[image:1664502835802-546.png]]
422 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image015.png]]
554 554  
555 555  Push this button will reboot the device. Device will exit alarm mode and re-join to LoRaWAN server.
556 556  
557 557  
558 -(% style="color:red" %)**RED button:**
427 +**RED button:**
559 559  
560 -[[image:1664502854406-763.png]]
429 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image016.png]]
561 561  
431 +|**Function**|**Action**|**Description**
432 +|Send Alarm|Keep Pressing **RED** button for more than 5 seconds|Enter Alarm Mode.  See [[Alarm Mode>>path:#Alarm_Mode]]
433 +|Exit Alarm Mode|Fast press the **RED** button 10 times|Exit Alarm Mode
434 +|Enter Deep Sleep Mode|Press and hold the button for 10 seconds, then quickly press the device 3 times to enter deep sleep|This is the mode ship out from factory. CPU will be complete in sleep mode and no LoRa activity, only use before deploy.
562 562  
563 -(% border="1.5" style="background-color:#ffffcc; color:green; width:520px" %)
564 -|=(% style="width: 100px;" %)**Function**|=(% style="width: 210px;" %)**Action**|=(% style="width: 210px;" %)**Description**
565 -|(% style="width:135px" %)Send Alarm|(% style="width:220px" %)Keep Pressing (% style="color:red" %)**RED**(%%) button for more than 5 seconds|(% style="width:265px" %)Enter Alarm Mode.  See [[Alarm Mode>>||anchor="H2.6AlarmMode"]]
566 -|(% style="width:135px" %)Exit Alarm Mode|(% style="width:220px" %)Fast press the (% style="color:red" %)**RED** (%%)button 10 times|(% style="width:265px" %)Exit Alarm Mode
567 -|(% style="width:135px" %)Enter Deep Sleep Mode|(% style="width:220px" %)Press and hold the button for 10 seconds, then quickly press the device 3 times to enter deep sleep|(% style="width:265px" %)This is the mode ship out from factory. CPU will be complete in sleep mode and no LoRa activity, only use before deploy.
568 568  
569 -== 2.12 USB Port Function ==
570 570  
571 571  
439 +== 2.10 USB Port Function ==
440 +
572 572  The USB interface of TrackerD has below functions:
573 573  
574 574  * Power on the device
575 575  * Recharge the battery
576 -* [[Configure Device>>||anchor="H3.ConfigureTrackerDviaATcommandorLoRaWANdownlink"]]
577 -* [[Upgrade Firmware>>||anchor="H5.UploadFirmware"]]
445 +* [[Configure Device>>path:#AT_Command]]
446 +* [[Upgrade Firmware>>path:#upgrade_image]]
578 578  
579 -= 3. Configure TrackerD via AT command or LoRaWAN downlink =
580 580  
581 581  
582 -User can configure TrackerD via AT Command or LoRaWAN Downlink.
583 583  
584 -LoRaWAN Downlink instruction for different platforms:  [[IoT LoRaWAN Server>>doc:Main.WebHome]]
585 585  
452 += 3. Configure TrackerD via AT command or LoRaWAN downlink =
586 586  
587 587  
588 -== 3.1 Access AT Command ==
455 +User can configure TrackerD via AT Command or LoRaWAN Downlink.
589 589  
457 +LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>url:http://wiki.dragino.com/xwiki/bin/view/Main/]]
590 590  
591 -TrackerD supports the AT command set in stock firmware. User can connect to TrackerD with TYPE-C cable to use AT commands as shown below.
592 592  
460 +== 3.1 Access AT Command ==
593 593  
594 -[[image:1664502999401-486.png]]
462 +TrackerD supports the AT command set in stock firmware. User can connect to TrackerD with TYPE-C cable to use AT commands as shown below. ...
595 595  
464 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image017.png]]
596 596  
597 -In PC, User needs to set serial tool baud rate to (% style="color:green" %)**115200**(%%) to access serial console for TrackerD. TrackerD will output system info once power on and user will be able to send AT commands:
598 598  
467 +In PC, User needs to set serial tool baud rate to **115200** to access serial console for TrackerD. TrackerD will output system info once power on and user will be able to send AT commands:
599 599  
600 -[[image:1664503022490-662.png]]
601 601  
470 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image018.png]]
602 602  
603 603  
604 -[[image:1664503035713-500.png]]
605 605  
474 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image019.png]]
606 606  
476 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]
607 607  
608 -[[image:1664503047675-651.png]]
609 609  
610 -
611 -
612 612  == 3.2 Command Set ==
613 613  
614 614  
615 615  === 3.2.1 Set Transmit Interval ===
616 616  
617 -
618 618  Set device uplink interval.
619 619  
620 -* (% style="color:blue" %)**AT Command:**
486 +* AT Command:
621 621  
622 -(% style="color:#037691" %)**AT+TDC=xxx **
488 +AT+TDC=xxx
623 623  
624 -Example:  AT+TDC=300000. Means set interval to 5 minutes(300 seconds)
490 +Example: AT+TDC=300000. Means set interval to 5 minutes(300 seconds)
625 625  
626 626  
627 -* (% style="color:blue" %)**Downlink Payload (prefix 0x01):**
493 +* Downlink Payload (prefix 0x01):
628 628  
629 -(% style="color:#037691" %)**0x01 00 01 2C**  (%%) ~/~/  Same as AT+TDC=300000
495 +0x01 00 01 2C     ~/~/ Same as AT+TDC=300000
630 630  
631 631  
632 -
633 633  === 3.2.2 Set Alarm Packet transmission interval ===
634 634  
635 -
636 636  Set alarm packet transmit interval
637 637  
638 -* (% style="color:blue" %)**AT Command:**
502 +* AT Command:
639 639  
640 -(% style="color:#037691" %)**AT+ATDC=xx. **
504 +AT+ATDC=xx.
641 641  
642 -Example:  AT+ATDC=60000  **~-~->    ** Set Alarm Packet Interval to 60 seconds. TrackerD will send every 60 seconds in Alarm mode, Default Value: 60000
506 +Example: AT+ATDC=60000  à Set Alarm Packet Interval to 60 seconds. TrackerD will send every 60 seconds in Alarm mode, Default Value: 60000
643 643  
644 644  
645 -* (% style="color:blue" %)**Downlink Payload (prefix 0xB1):**
509 +* Downlink Payload (prefix 0xB1):
646 646  
647 -(% style="color:#037691" %)**0xB1 00 00 3C ** (%%) ~/~/  Same as AT+ATDC=60000
511 +0xB1 00 00 3C    ~/~/Same as AT+ATDC=60000
648 648  
649 649  
514 +=== 3.3.3 Set Sports Mode Packet transmission interval ===
650 650  
651 -=== 3.2.3 Set Transport Mode Packet transmission interval ===
516 +Set sports packet transmit interval
652 652  
518 +* AT Command:
653 653  
654 -Set Transport Mode packet transmit interval
520 +AT+MTDC=xx.
655 655  
656 -* (% style="color:blue" %)**AT Command:**
522 + Example: AT+MTDC=300000  à Set Sports Mode Packet Interval to 300 seconds. TrackerD will send every 300 seconds in Sports mode, Default Value: 300000
657 657  
658 -(% style="color:#037691" %)**AT+MTDC=xx. **
659 659  
660 -Example:  AT+MTDC=300000  **~-~->    ** Set Transport Mode Packet Interval to 300 seconds. TrackerD will send every 300 seconds in Transport mode, Default Value: 300000
525 +* Downlink Payload (prefix 0x03):
661 661  
527 +0x03 00 01 2C    ~/~/Same as AT+ MTDC=3000000
662 662  
663 -* (% style="color:blue" %)**Downlink Payload (prefix 0x03):**
664 664  
665 -(% style="color:#037691" %)**0x03 00 01 2C**  (%%) ~/~/  Same as AT+ MTDC=3000000
666 666  
531 +=== 3.3.4 Exit Alarm ===
667 667  
668 -
669 -=== 3.2.4 Exit Alarm ===
670 -
671 -
672 672  Server send downlink command to exit Alarm mode
673 673  
674 -* (% style="color:blue" %)**AT Command: No AT Command**
535 +* AT Command:
675 675  
676 -* (% style="color:blue" %)**Downlink Payload (prefix 0x02):**
537 +No AT Command
677 677  
678 -(% style="color:#037691" %)**0x02 01**    (%%) ~/~/  Exit Alarm Mode
679 679  
540 +* Downlink Payload (prefix 0x02):
680 680  
542 +0x02 01     ~/~/ Exit Alarm Mode
681 681  
682 -=== 3.2.5 Disable/Enable LED flash ===
683 683  
545 +=== 3.3.5 Disable/Enable LED flash ===
684 684  
685 685  Disable/Enable LED for position, downlink and uplink
686 686  
687 -* (% style="color:blue" %)**AT Command:**
549 +* AT Command:
688 688  
689 -(% style="color:#037691" %)**AT+LON=xx.  (Disable (0), Enable (1), default:1)**
551 +AT+LON=xx.  (Disable (0), Enable (1), default:1)
690 690  
691 -Example: AT+LON=0  **~-~-> ** Disable LED for position, downlink and uplink.
553 + Example: AT+LON=0 à Disable LED for position, downlink and uplink.
692 692  
693 693  
694 -* (% style="color:blue" %)**Downlink Payload (prefix 0xAE):**
556 +* Downlink Payload (prefix 0xAE):
695 695  
696 -(% style="color:#037691" %)**0xAE 00 ** (%%) ~/~/  Same as AT+LON=0
558 +0xAE 00    ~/~/Same as AT+LON=0
697 697  
698 698  
699 699  
700 -=== 3.2.6 Disable/Enable Transport Mode ===
701 701  
563 +=== 3.3.6 Disable/Enable movement detect (Debug Only) ===
702 702  
703 -Users can use this feature to enable/disable Transport Mode.
565 +User can use this feature to check and set thread hole of movement detect
704 704  
705 -* (% style="color:blue" %)**AT Command:**
567 +* AT Command:
706 706  
707 -(% style="color:#037691" %)**AT+INTWK=xx.  (Disable (0), Enable (1), default:0)**
569 +AT+INTWK=xx.  (Disable (0), Enable (1), default:0)
708 708  
709 -Example:  AT+ INTWK =1  **~-~->   ** Enable Transport Mode.
571 + Example: AT+ INTWK =1 à Enable detect movement.
710 710  
711 711  
712 -* (% style="color:blue" %)**Downlink Payload (prefix 0xAF):**
574 +* Downlink Payload (prefix 0xAF):
713 713  
714 -(% style="color:#037691" %)**0xAF 01 ** (%%) ~/~/  Same as AT+ INTWK =1
576 +0xAF 01    ~/~/Same as AT+ INTWK =1
715 715  
716 716  
717 717  
718 -=== 3.2.7 Set Positioning Mode ===
580 +=== 3.3.7 Set Positioning Mode ===
719 719  
582 +SMOD define the how TrackerD scan and uplink date.
720 720  
721 -SMOD define the how TrackerD scan and uplink data:
584 +GPS室外定位模式：设备默认模式，设备入网后会发送device当前模式下的信息，随后立即定位发送数据包（默认是3分钟定位，超过将发送无效数据），如果出现意外情况下，快速按键3下，将会发出报警消息（默认每分钟发送一次）。GPS还有一种logdata模式，在断网的情况下将数据存储下来，等到有网的时候，一次将数据以每10秒上报。
722 722  
586 + BLE室内定位模式：设备入网后会发送device当前模式下的信息，随后立即定位发送数据包（默认是5秒，超过将发送无效数据），如果出现意外情况下，快速按键3下，将会发出报警消息（默认每3分钟发送一次）。
723 723  
724 -* (% style="color:blue" %)**AT Command:**
588 + GPS和BLE混动模式：设备入网后会发送device当前模式下的信息，随后立即判断是否在室内，如果是就进行BLE定位，不是就GPS定位。如果出现意外情况下，快速按键3下，将会发出报警消息（默认每分钟发送一次）。
725 725  
726 -(% style="color:#037691" %)**AT+SMOD=aa,bb**
590 +运动模式：设备入网后会发送device当前模式下的信息，随后发送GPS定位数据，设备判断是否在运动，没有运动传感器没有检测到动作，立即进入静止状态（默认20分钟），如果产生运动，将每5分钟发送一次数据，再第五分钟后检测设备有误运动，无将切换到静止状态，有立即发送数据。
727 727  
728 -(% style="color:#037691" %)** aa:**
729 729  
730 -* (% style="color:#037691" %)**1: GPS ONLY(Factory Settings):    **(%%)only get and uplink GPS location info.
731 -* (% style="color:#037691" %)**2: BLE ONLY:              **(%%)Only obtain iBeacon info via BLE and uplink. Design for Indoor tracking.
732 -* (% style="color:#037691" %)**3: GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.Devices will try to search BLE iBeacon first. If device can't find the iBeacon, it will use GPS for positioning
733 733  
734 -(% style="color:#037691" %)**bb:**
735 735  
736 -(% style="color:#037691" %)** if aa = 1: **
595 +* AT Command:
737 737  
738 -* (% style="color:#037691" %)**0 :  **(%%)GPS+ BAT+ State+Tem&Hum
739 -* (% style="color:#037691" %)**1 :**(%%)  GPS +BAT State
597 +AT+SMOD=xx.
740 740  
741 -(% style="color:#037691" %)** if aa = 2: **
599 + Example:
742 742  
743 -* (% style="color:#037691" %)**3 :  **(%%)(iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State
601 + AT+ SMOD =1,0    à GPS+ BAT+ State+Tem&Hum
744 744  
745 - **Example:**
603 + AT+ SMOD =1,1    à GPS +BAT State
746 746  
747 - AT+ SMOD =1,0  **~-~-> ** GPS+ BAT+ State+Tem&Hum
605 + AT+ SMOD =2,3    à (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State。
748 748  
749 - AT+ SMOD =1,1    **~-~->**  GPS +BAT State
750 750  
751 - AT+ SMOD =2,3    **~-~->**  (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State
608 +* Downlink Payload (prefix 0xA5):
752 752  
610 +0xA5 01 00     ~/~/ Same as AT+ SMOD =1,0
753 753  
754 -* (% style="color:blue" %)**Downlink Payload (prefix 0xA5):**
755 755  
756 -(% style="color:#037691" %)**0xA5 01 00**    (%%) ~/~/  Same as AT+ SMOD =1,0
613 +=== 3.3.8 Set MAX GPS position time ===
757 757  
758 -
759 -
760 -=== 3.2.8 Set MAX GPS position time ===
761 -
762 -
763 763  Set max positioning time, default is 150 seconds. TrackerD will try to get location info within this period. If fail to get position data within this time, TrackerD will use 000000 for latitude and longitude.
764 764  
765 765  
... ... @@ -766,60 +766,60 @@
766 766  If AT+FTIME=0. The GPS module will be always powered and positioning. This will highly increase the power consumption (up to 50mA). When AT+FTIME=0, it will improve fix accuracy and shorten the acquire time for next uplink.
767 767  
768 768  
769 -* (% style="color:blue" %)**AT Command:**
621 +* AT Command:
770 770  
771 -(% style="color:#037691" %)**AT+FTIME=xx**  (%%) **~-~-> ** Set to use xx as max fix time.
623 +AT+FTIME=xx  à Set to use xx as max fix time.
772 772  
773 -Example:  AT+FTIME=150
625 +Example: AT+FTIME=150
774 774  
775 775  
776 -* (% style="color:blue" %)**Downlink Payload (prefix 0xAA):**
628 +* Downlink Payload (prefix 0xAA):
777 777  
778 -(% style="color:#037691" %)**0xAA 00 96 ** (%%) ~/~/  Set AT+FTIME=150
630 +0xAA 00 96      ~/~/Set AT+FTIME=150
779 779  
780 780  
781 781  
782 -=== 3.2.9 Set PDOP value for GPS fix accuracy ===
783 783  
635 +=== 3.3.9 Set PDOP value for GPS fix accuracy ===
784 784  
785 -PDOP(Position Dilution of Precision) filter, TrackerD will only accept GPS data with a lower PDOP value than pre-configure PDOP value. If device can't get a valid GPS packet within FTIME timeout, it will use the GPS data with lowest PDOP value to server.
637 +PDOP(Position Dilution of Precision) filter, TrackerD will only accept GPS data with a lower PDOP value than pre-configure PDOP value. If device can’t get a valid GPS packet within FTIME timeout, it will use the GPS data with lowest PDOP value to server.
786 786  
787 787  
788 788  A GPS packet with lower PDOP has higher accuracy. PDOP default value is 2.0
789 789  
790 790  
791 -* (% style="color:blue" %)**AT Command:**
643 +* AT Command:
792 792  
793 -(% style="color:#037691" %)**AT+PDOP=2.5 ** (%%) **~-~->  ** Set PDOP to 2.5
645 +AT+PDOP=2.5  à Set PDOP to 2.5
794 794  
795 795  
796 -* (% style="color:blue" %)**Downlink Payload (prefix 0xAD):**
648 +* Downlink Payload (prefix 0xAD):
797 797  
798 -(% style="color:#037691" %)**0xAD 00 0A**   (%%) ~/~/  Set AT+PDOP=1  (0x0A / 10 =1)
650 +0xAD 00 0A    ~/~/Set AT+PDOP=1    (0x0A / 10 =1)
799 799  
800 -(% style="color:#037691" %)**0xAD 00 19**   (%%) ~/~/  Set AT+PDOP=2.5    (0x19 / 10 =2.5)
652 +0xAD 00 19    ~/~/Set AT+PDOP=2.5    (0x19 / 10 =2.5)
801 801  
802 -(% style="color:#037691" %)**0xAD 00 46**    (%%) ~/~/  Set AT+PDOP=7  (0x46 / 10 =7)
654 +0xAD 00 46    ~/~/Set AT+PDOP=7     (0x46 / 10 =7)
803 803  
656 +Disable/Enable the confirmation mode
804 804  
658 +* AT Command:
805 805  
806 -Disable/Enable the confirmation mode
660 +AT+CFM=xx.
807 807  
808 -* (% style="color:blue" %)**AT Command:**
662 + Example:
809 809  
810 -(% style="color:#037691" %)**AT+CFM=xx. **
664 + AT+ CFM=0    à Disable confirmation
811 811  
666 + AT+ CFM=1    à Enable confirmation
812 812  
813 -**~ Example:**
814 814  
815 - AT+ CFM=0    **~-~->   ** Disable confirmation
669 +* Downlink Payload (prefix 0x05):
816 816  
817 - AT+ CFM=1    **~-~->  ** Enable confirmation
671 +0x05 01      ~/~/ Same as AT+ SMOD =1
818 818  
819 819  
820 -* (% style="color:blue" %)**Downlink Payload (prefix 0x05):**
821 821  
822 -(% style="color:#037691" %)**0x05 01 **(%%) ~/~/  Same as AT+ SMOD =1
823 823  
824 824  
825 825  
... ... @@ -832,42 +832,38 @@
832 832  
833 833  == 5.1 Firmware Change Log ==
834 834  
835 -
836 836  **[[See this link>>url:https://github.com/dragino/TrackerD]]**
837 837  
838 838  
839 -
840 840  == 5.2 How to upgrade firmware ==
841 841  
692 +User can use the TrackerD ’s USB port to upgrade firmware into it. The hardware connection for upgrade firmware is as below:
842 842  
843 -User can use the TrackerD's USB port to upgrade firmware into it. The hardware connection for upgrade firmware is as below:
844 844  
695 +**(% style="color:blue" %)Step1:  **(%%)Connect TrackerD and PC via USB cable shipped with TrackerD.
845 845  
846 -(% style="color:blue" %)**Step1:  **(%%)Connect TrackerD and PC via USB cable shipped with TrackerD.
697 +**(% style="color:blue" %)Step2:** (%%) Install CH9102 driver in the PC.
847 847  
848 -
849 -(% style="color:blue" %)**Step2:** (%%) Install CH9102 driver in the PC.
850 -
851 851  After installation of the driver and plug in TrackerD, user should be able to see com port in PC's device manager.
852 852  
853 853  
854 -(% style="color:blue" %)**Step3:  **(%%)Download and Install Flash Tool:  [[https:~~/~~/www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools>>url:https://www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools]]
702 +**(% style="color:blue" %)Step3：**(%%) Download and Install Flash Tool:
855 855  
704 +[[https:~~/~~/www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools>>url:https://www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools]]
856 856  
857 -(% style="color:blue" %)**Step4:** (%%) Run Flash Download Tool and configure chip type to ESP32
706 +**(% style="color:blue" %)Step4:** (%%) Run Flash Download Tool and configure chip type to ESP32
858 858  
859 859  
860 -[[image:1664503563660-578.png]]
709 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image021.png||alt="image-20220712083115-1.png"]]
861 861  
711 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image022.png||alt="image-20220712083115-2.png"]]
862 862  
863 -[[image:1664503574618-659.png]]
864 864  
714 +**(% style="color:blue" %)Step5:** (%%) Select the firmware file (.bin format), com port and proper SPI configure. Clink Start. Bin file location:
865 865  
866 -(% style="color:blue" %)**Step5:** (%%) Select the firmware file (.bin format), com port and proper SPI configure. Clink Start. Bin file location:
716 +[[https:~~/~~/www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0>>url:https://www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0]]
867 867  
868 -[[https:~~/~~/github.com/dragino/TrackerD/releases>>https://github.com/dragino/TrackerD/releases]]
869 869  
870 -
871 871  Users need to use below files:
872 872  
873 873  boot_app0.bin @0e000
... ... @@ -874,17 +874,16 @@
874 874  
875 875  ESP_LORA-eeprom-class.bin @ 0x10000
876 876  
725 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image023.png||alt="image-20220712083115-3.png"]]
877 877  
878 -[[image:1664503593459-435.png]]
727 +After upgrade finish, it will show finish as below:
879 879  
729 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image024.png||alt="image-20220712083115-4.png"]]
880 880  
881 881  
882 -After upgrade finish, it will show finish as below:
883 883  
884 -[[image:1664503611848-385.png]]
885 885  
886 886  
887 -
888 888  = 6. Developer Guide =
889 889  
890 890  
... ... @@ -894,48 +894,49 @@
894 894  === 6.1.1 Set up ARDUINO compile environment ===
895 895  
896 896  
897 -* **Download the latest Arduino software (IDE) from the Arduino official website:  [[https:~~/~~/www.arduino.cc/en/Main/Software>>url:https://www.arduino.cc/en/Main/Software]]**
744 +* Download the latest Arduino software (IDE) from the Arduino official website
898 898  
899 -Install IDE on PC, open and click (% style="color:#037691" %)**File ~-~-> Preference**,(%%) add the following URL:  [[https:~~/~~/dl.espressif.com/dl/package_esp32_index.json>>url:https://links.jianshu.com/go?to=https%3A%2F%2Fdl.espressif.com%2Fdl%2Fpackage_esp32_index.json]]
746 +[[https:~~/~~/www.arduino.cc/en/Main/Software>>url:https://www.arduino.cc/en/Main/Software]]
900 900  
748 +Install IDE on PC, open and click File ~-~-> Preference, add the following URL [[https:~~/~~/dl.espressif.com/dl/package_esp32_index.json>>url:https://links.jianshu.com/go?to=https%3A%2F%2Fdl.espressif.com%2Fdl%2Fpackage_esp32_index.json]]
901 901  
902 -[[image:1664503635019-941.png]]
750 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image025.png]]
903 903  
752 +* Go to tools ~-~-> Boards ~-~-> Boards Manager, find the esp32 information and install it.
904 904  
754 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image026.png]]
905 905  
906 -* (% style="color:#037691" %)**Go to tools ~-~-> Boards ~-~-> Boards Manager**,(%%) **find the esp32 information and install it.**
907 907  
908 -[[image:1664503715811-892.png]]
757 +* Download the latest TrackerD from the dragino github
909 909  
759 +[[https:~~/~~/github.com/dragino/TrackerD>>url:https://github.com/dragino/TrackerD]]
910 910  
911 911  
912 -* **Download the latest TrackerD from the dragino github: [[https:~~/~~/github.com/dragino/TrackerD>>url:https://github.com/dragino/TrackerD]]**
762 +Put the Library in the TrackerD directory into the libraries file in the Arduino directory
913 913  
914 -Put the Library in the TrackerD directory into the libraries file in the Arduino directory:
764 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image027.png]]
915 915  
916 916  
917 -[[image:1664503752288-974.png]]
918 918  
919 919  
920 -
921 921  == 6.2 Source Code ==
922 922  
923 923  
924 -* (% style="color:blue" %)**Open the example in the TrackerD file, please select the correct port in the IDE, as shown below:**
772 +* Open the example in the TrackerD file, please select the correct port in the IDE, as shown below:
925 925  
926 -[[image:1664503794261-827.png]]
774 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image028.png]]
927 927  
776 +* Click to upload
928 928  
778 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image029.png]]
929 929  
930 -* (% style="color:blue" %)**Click to upload**
780 +* Check the result, if the upload is successful, as shown below, open the serial port to view the data
931 931  
932 -[[image:1664503808294-336.png]]
933 933  
783 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image030.png]] [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image031.png]]
934 934  
935 935  
936 -* (% style="color:blue" %)**Check the result, if the upload is successful, as shown below, open the serial port to view the data**
937 937  
938 -[[image:1664503824081-592.png]] [[image:1664503831430-500.png]]
939 939  
940 940  
941 941  
... ... @@ -942,10 +942,11 @@
942 942  = 7.  FAQ =
943 943  
944 944  
793 +
945 945  == 7.1 How to change the LoRa Frequency Bands/Region? ==
946 946  
947 947  
948 -User can follow the introduction for [[how to upgrade image>>||anchor="H5.UploadFirmware"]]. When download the images, choose the required image file for download.
797 +User can follow the introduction for [[how to upgrade image>>path:#upgrade_image]]. When download the images, choose the required image file for download.
949 949  
950 950  
951 951  
... ... @@ -956,8 +956,8 @@
956 956  
957 957  
958 958  
959 -(% border="1.5" cellspacing="3" style="background-color:#ffffcc; color:green; width:314px" %)
960 -|=(% style="width: 118px;" %)**Pin**|=(% style="width: 67px;" %)**Color**|=(% style="width: 123px;" %)**USB Pin**
808 +(% border="2" style="background-color:#ffffcc; color:green; width:314px" %)
809 +|(% style="width:118px" %)**Pin**|(% style="width:67px" %)**Color**|(% style="width:123px" %)**USB Pin**
961 961  |(% style="width:118px" %)A4,B4,A9,B9|(% style="width:67px" %)Red|(% style="width:123px" %)VCC
962 962  |(% style="width:118px" %)A7,B7|(% style="width:67px" %)White|(% style="width:123px" %)D- (N/A)
963 963  |(% style="width:118px" %)A6,B6|(% style="width:67px" %)Green|(% style="width:123px" %)D+(N/A)
... ... @@ -975,6 +975,7 @@
975 975  (% style="color:blue" %)**XXX**(%%): The default frequency band
976 976  
977 977  * (% style="color:red" %)**EU433**(%%): Default frequency band EU433
827 +* (% style="color:red" %)**CN470**(%%): Default frequency band CN470
978 978  * (% style="color:red" %)**EU868**(%%): Default frequency band EU868
979 979  * (% style="color:red" %)**IN865**(%%): Default frequency band IN865
980 980  * (% style="color:red" %)**KR920**(%%): Default frequency band KR920
... ... @@ -982,25 +982,33 @@
982 982  * (% style="color:red" %)**AU915**(%%): Default frequency band AU915
983 983  * (% style="color:red" %)**US915**(%%): Default frequency band US915
984 984  
835 +
985 985  = 9.  Packing Info =
986 986  
987 987  
988 -(% style="color:#037691" %)**Package Includes**:
839 +**Package Includes**:
989 989  
990 -* TrackerD LoRaWAN GPS/BLE Tracker x 1
991 -* USB recharge & program cable x 1
841 +* TrackerD x 1
842 +* Rechargeable cable x 1
843 +* Program Cable x 1
992 992  
993 -(% style="color:#037691" %)**Dimensions and Weight**:
845 +**Dimensions and Weight**:
994 994  
995 -* Device Size: 85 x 48 x 15 cm
996 -* Weight: 50g
847 +* Device Size: 85 x 48 x 15 mm/pcs
848 +* Weight: 55g/pcs
997 997  
998 -= 10. Support =
999 999  
1000 1000  
852 += 10. Support =
853 +
1001 1001  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1002 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]].
855 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to
1003 1003  
857 +[[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]]
858 +
859 +
860 +
861 +
1004 1004  = 11.  Reference =
1005 1005  
1006 1006  
... ... @@ -1007,5 +1007,3 @@
1007 1007  * [[**Firmware in Bin format**>>https://www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0]]
1008 1008  * **[[Source Code>>https://github.com/dragino/TrackerD]] **
1009 1009  * [[**Hardware Source**>>https://www.dropbox.com/sh/orwoy6cecb89m4e/AAD37sRuUrvKsHgAJxuVTkB5a?dl=0]]
1010 -
1011 -
1664503831430-500.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -147.8 KB
Content
1664505654417-133.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -27.5 KB
Content
1665301570342-765.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.6 KB
Content
1665301636888-168.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.6 KB
Content
1665301687277-443.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -22.6 KB
Content
1665301786397-168.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -22.6 KB
Content
image-20221006181316-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -17.7 KB
Content
image-20221006181357-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -88.0 KB
Content
image-20221009160220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -46.4 KB
Content
image-20221009160309-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -57.2 KB
Content
image-20221009234629-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -222.9 KB
Content
image-20221009234703-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -136.4 KB
Content