Skip to Content
Last modified by Xiaoling on 2025/04/27 16:48
From version 66.3
edited by Xiaoling
on 2022/10/09 16:01
Change comment: There is no comment for this version
To version 51.23
edited by Xiaoling
on 2022/09/30 14:57
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -61,11 +61,13 @@
61 61  * EEPROM: 520 KB
62 62  * Clock Speed: 32Mhz
63 63  
64 +
64 64  (% style="color:blue" %)**Common DC Characteristics:**
65 65  
66 66  * Supply Voltage: 5V via USB port or Internal li-on battery
67 67  * Operating Temperature: -40 ~~ 60°C
68 68  
70 +
69 69  (% style="color:blue" %)**LoRa Spec:**
70 70  
71 71  * Frequency Range,
... ... @@ -87,10 +87,12 @@
87 87  * Packet engine up to 256 bytes with CRC.
88 88  * LoRaWAN 1.0.3 Specification
89 89  
92 +
90 90  (% style="color:blue" %)**Battery:**
91 91  
92 92  * 1000mA Li-on Battery power (for model TrackerD)
93 93  
97 +
94 94  (% style="color:blue" %)**Power Consumption**
95 95  
96 96  * Sleeping Mode: 200uA
... ... @@ -99,7 +99,6 @@
99 99  
100 100  
101 101  
102 -
103 103  == 1.3  Features ==
104 104  
105 105  
... ... @@ -106,7 +106,7 @@
106 106  * LoRaWAN 1.0.3 Class A
107 107  * ESP32 PICO D4
108 108  * SX1276/78 Wireless Chip
109 -* Arduino IDE Compatible
112 +** Arduino IDE Compatible
110 110  * Open source hardware / software
111 111  * Regular/ Real-time GPS,BLE,WIFI tracking
112 112  * Built-in3 axis accelerometer (LIS3DH)
... ... @@ -120,7 +120,6 @@
120 120  
121 121  
122 122  
123 -
124 124  == 1.4  Applications ==
125 125  
126 126  
... ... @@ -129,7 +129,6 @@
129 129  
130 130  
131 131  
132 -
133 133  = 2.1 Use TrackerD =
134 134  
135 135  
... ... @@ -192,110 +192,60 @@
192 192  (% style="color:blue" %)**Step 3:**(%%) TrackerD will auto join to the LoRaWAN network. After join success, TrackerD will start to upload message to IoT server.
193 193  
194 194  
195 -== 2.3  Positioning Mode(SMOD) ==
196 +(% style="color:blue" %)**Positioning Mode(SMOD):**
196 196  
198 +* (% style="color:#037691" %)**GPS ONLY(Factory Settings):    **(%%)only get GPS location info.
199 +* (% style="color:#037691" %)**BLE ONLY:              **(%%)Only obtain iBeacon info via BLE. Design for Indoor tracking.
200 +* (% style="color:#037691" %)**GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.
197 197  
198 -Users can set TrackerD to different Positioning Mode for different applications. Below mod are supported.
202 +User can switch modes by [[changing SMOD>>||anchor="H3.2.7SetPositioningMode"]].
199 199  
200 -* (% style="color:#037691" %)**GPS ONLY(Factory Settings):    **(%%)only get and uplink GPS location info.
201 -* (% style="color:#037691" %)**BLE ONLY:              **(%%)Only obtain iBeacon info via BLE and uplink. Design for Indoor tracking.
202 -* (% style="color:#037691" %)**GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.Devices will try to search BLE iBeacon first. If device can't find the iBeacon, it will use GPS for positioning.
203 203  
204 -Users can switch modes by [[changing SMOD>>||anchor="H3.2.7SetPositioningMode"]].
205 205  
206 +== 2.3 Uplink Payload ==
206 206  
207 207  
208 -== 2.4  Uplink Payload ==
209 +=== 2.3.1 Uplink FPORT~=5, Device Status ===
209 209  
210 210  
211 -=== 2.4.1 Uplink FPORT~=5, Device Status ===
212 212  
213 +=== 2.3.2 Uplink FPORT~= , Realtime GNSS Positioning ===
213 213  
214 -Uplink the device configures with FPORT=5. Once LGT92 Joined the network, it will uplink this message to the server. After first uplink, LHT52 will uplink Device Status every 12 hours.
215 215  
216 +The default uplink payload includes totally 11 bytes. (User can use AT+MOD=0 to enable the Temperature and humidity sensor to hum/tem info from accelerometer. When accelerometer info is enable, total payload will be 15 bytes, please note 15 bytes won't work on DR0 on US915/AU915 frequency band. )
216 216  
217 -(% border="1.5" style="background-color:#ffffcc; color:green; width:520px" %)
218 -|=(% scope="row" style="width: 108px;" %)**Size(bytes)**|=(% style="width: 82px;" %)**1**|=(% style="width: 83px;" %)**2**|=(% style="width: 94px;" %)**1**|=(% style="width: 84px;" %)**1**|=(% style="width: 44px;" %)2|=(% style="width: 63px;" %)**2**|=(% style="width: 60px;" %)1
219 -|=(% style="width: 108px;" %)**Value**|(% style="width:82px" %)Sensor Model|(% style="width:83px" %)Firmware Version|(% style="width:94px" %)Frequency Band|(% style="width:84px" %)Sub-band|(% style="width:44px" %)BAT|(% style="width:63px" %)SMOD|(% style="width:60px" %)Status
220 220  
221 -[[image:1665301570342-765.png]]
222 -
223 -
224 -Example Payload (FPort=5):  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT52%20-%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220621105116-11.png?rev=1.1||alt="image-20220621105116-11.png"]]
225 -
226 -**Sensor Model**: For TrackerD, this value is 0x13.
227 -
228 -**Firmware Version**: 0x0100, Means: v1.0.0 version.
229 -
230 -**Frequency Band**:
231 -
232 -*0x01: EU868
233 -
234 -*0x02: US915
235 -
236 -*0x03: IN865
237 -
238 -*0x04: AU915
239 -
240 -*0x05: KZ865
241 -
242 -*0x06: RU864
243 -
244 -*0x07: AS923
245 -
246 -*0x08: AS923-1
247 -
248 -*0x09: AS923-2
249 -
250 -*0x0a: AS923-3
251 -
252 -**Sub-Band**: value 0x00 ~~ 0x08(only for CN470, AU915,US915. Others are0x00)
253 -
254 -**BAT**: shows the battery voltage for TrackerD.
255 -
256 -Ex1: 0x0B3A = 2874mV
257 -
258 -Use can also get the Device Status uplink through the downlink command:
259 -
260 -
261 -
262 -=== 2.4.2 Uplink FPORT~=2, Realtime GNSS Positioning + Temperature & Humidity ===
263 -
264 -
265 -User can use **AT+SMOD=1,0** to enable uploading on-board Temperature and humidity values, and the total payload will be 15 bytes, please note that 15 bytes won't work on DR0 on US915/AU915 frequency band.
266 -
267 -
268 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:480px" %)
219 +(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:500px" %)
269 269  |=(% scope="row" style="width: 50px;" %)(((
270 270  **Size(bytes)**
271 -)))|(% style="width:60px" %)4|(% style="width:70px" %)4|(% style="width:80px" %)2|(% style="width:73px" %)1|(% style="width:40px" %)(((
272 -2
273 -)))|(% style="width:87px" %)(((
274 -2
222 +)))|(% style="width:60px" %)4|(% style="width:70px" %)4|(% style="width:80px" %)2|(% style="width:50px" %)1|(% style="width:80px" %)(((
223 +2(optional )
224 +)))|(% style="width:80px" %)(((
225 +2(optional)
275 275  )))
276 276  |=(% style="width: 69px;" %)**Value**|(% style="width:76px" %)[[Latitude>>||anchor="HLocationinfo:"]]|(% style="width:87px" %)[[Longitude>>||anchor="HLocationinfo:"]]|(% style="width:76px" %)(((
277 277  [[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
278 -)))|(% style="width:73px" %)[[FLAG>>||anchor="HFLAG:"]]|(% style="width:40px" %)[[Hum>>||anchor="HHum:"]]|(% style="width:87px" %)[[Tem>>||anchor="HTem:"]]
229 +)))|(% style="width:52px" %)[[FLAG>>||anchor="HFLAG:"]]|(% style="width:88px" %)[[Hum>>||anchor="HHum:"]]|(% style="width:83px" %)[[Tem>>||anchor="HTem:"]]
279 279  
280 -[[image:1665301636888-168.png]]
231 +[[image:1664501958445-288.png]]
281 281  
282 282  
283 -==== (% style="color:blue" %)**Alarm & BAT:**(%%) ====
234 +==== (% style="color:blue" %)Alarm & BAT:(%%) ====
284 284  
285 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:250px" %)
286 -|=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)1 bit|(% style="width:80px" %)1bit|(% style="width:50px" %)14bits
236 +(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:280px" %)
237 +|=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)1 bit|(% style="width:80px" %)1bit|(% style="width:50px" %)14 bits
287 287  |=(% style="width: 72px;" %)**Value**|(% style="width:67px" %)reserve|(% style="width:118px" %)Alarm Indicate|(% style="width:63px" %)[[BAT>>||anchor="HBAT:"]] 
288 288  
289 -==== (% style="color:blue" %)**FLAG:**(%%) ====
240 +==== (% style="color:blue" %)FLAG:(%%) ====
290 290  
291 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:250px" %)
292 -|=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)2bits|(% style="width:50px" %)1bit
293 -|=(% style="width: 79px;" %)**Value**|(% style="width:55px" %)[[MOD>>||anchor="H3.2.7SetPositioningMode"]]|(% style="width:47px" %)[[LON>>||anchor="HLON:"]]
242 +(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:280px" %)
243 +|=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)2 bits|(% style="width:50px" %)1bit|(% style="width:100px" %)5 bits
244 +|=(% style="width: 79px;" %)**Value**|(% style="width:55px" %)[[MOD>>||anchor="H2.3.4BLEpositioningPayload28Fport229"]]|(% style="width:47px" %)[[LON>>||anchor="HLON:"]]|(% style="width:140px" %)Firmware version 
294 294  
295 295  **Example:** Payload: 0x02863D68 FAC29BAF 4B45 60 0202 011A 
296 296  
297 297  
298 -==== (% style="color:blue" %)**Location info:**(%%) ====
249 +==== (% style="color:blue" %)Location info:(%%) ====
299 299  
300 300  * Latitude: 02863D68  ⇒  //if (0x//02863D68//& 0x80000000 = 0 )~://  //value = 02863D68 /1000000 = 42.351976//
301 301  * Longitude: FAC29BAF  ⇒ //if (0x//FAC29BAF// & 0x80000000 = 1 )~://  //value = (0x//FAC29BAF// – 0x 100000000)/1000000 =//-87.9094//57//
... ... @@ -304,31 +304,35 @@
304 304  
305 305  1.  When power is low (<2.84v), GPS won't be able to get location info and GPS feature will be disabled and the location field will be filled with 0x0FFFFFFF, 0x0FFFFFFF.
306 306  
307 -2.  In this mode, the total payload will be 15 bytes, while US915/AU915 DR0 accepts only 11 bytes payload. In this case, the payload on server will be ignore and shows as below:
258 +2.  In firmware version v1.5, Roll & Pitch is disabled by default.
308 308  
260 +3.  When enable 9-axis motion sensor, the total payload will be 15 bytes, while US915/AU915 DR0 accept only 11 bytes payload. In this case, the payload on server will be ignore and shows as below:
309 309  
262 +
310 310  [[image:1664502116362-706.png]]
311 311  
312 312  
313 -3.  While GPS can't get location info after timeout(FTIME Parameter), the latitude and longitude will be filled with all 0x00:
314 314  
267 +4.  While GPS can't get location info after timeout(FTIME Parameter), the latitude and longitude will be filled with all 0x00:
268 +
315 315  [[image:1664502166010-515.png]]
316 316  
317 317  
318 318  
319 -==== (% style="color:blue" %)**Alarm:**(%%) ====
273 +==== (% style="color:blue" %)Alarm:(%%) ====
320 320  
275 +
321 321  Example:  0x4B & 0x40 >> 6 = 0x01
322 322  
323 323  
324 -==== (% style="color:blue" %)**BAT:**(%%) ====
279 +==== (% style="color:blue" %)BAT:(%%) ====
325 325  
281 +
326 326  Example:  0x0CDD & 0x3FFF ⇒ 3293 (mV).
327 327  
328 -(((
329 -The battery info shows the battery voltage, User can use the below mapping to indicate the battery in percentage: \
330 -)))
284 +The battery info shows the current voltage, for (% style="color:blue" %)**TrackerD**(%%) version which powered by li-on battery. User can use below mapping to indicate the battery in percentage: \
331 331  
286 +
332 332  * > 4.0v :  80% ~~ 100%
333 333  * 3.85v ~~3.99v:  60% ~~ 80%
334 334  * 3.70v ~~ 3.84v:  40% ~~ 60%
... ... @@ -335,80 +335,46 @@
335 335  * 3.40v ~~ 3.69v:  20% ~~ 40%
336 336  * < 3.39v:  0~~20%
337 337  
338 -==== (% style="color:blue" %)**LON:**(%%) ====
293 +==== (% style="color:blue" %)LON:(%%) ====
339 339  
295 +
340 340  Enable/Disable LED activity for uplink
341 341  
342 -(((
343 343  0x00:  Disable LED indicator.
344 -)))
345 345  
346 -(((
347 347  0x01:  Enable LED indicator (Default Value)
348 -)))
349 349  
350 350  
351 -==== (% style="color:blue" %)**Hum:**(%%) ====
303 +==== (% style="color:blue" %)Hum:(%%) ====
352 352  
353 353  0202 = //if (0x0202 & 0x8000 = 0 ):  value =// 0x0202 / 100 = +514 ⇒ 51.4 degree
354 354  
355 355  
356 -==== (% style="color:blue" %)**Tem:**(%%) ====
308 +==== (% style="color:blue" %)Tem:(%%) ====
357 357  
358 358  011A =if (0x011A & 0x8000 = 1 ):  value =( 0x011A - 0x10000)/10(dec) ⇒ -//28.2 degree//
359 359  
360 360  
361 361  
362 -=== 2.4.3  Uplink FPORT~=3, Realtime GNSS Positioning (Default Mode) ===
363 363  
315 +=== 2.3.3 Uplink FPORT~= , History GNSS Positioning ===
364 364  
365 -The default uplink payload includes totally 11 bytes. The payload is the first 11 bytes of Uplink FPORT=2, real-time GNSS positioning, (remove the temp and humidity)
366 366  
367 367  
368 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:480px" %)
369 -|=(% scope="row" style="width: 50px;" %)(((
370 -**Size(bytes)**
371 -)))|(% style="width:60px" %)4|(% style="width:70px" %)4|(% style="width:80px" %)2|(% style="width:73px" %)1
372 -|=(% style="width: 69px;" %)**Value**|(% style="width:76px" %)[[Latitude>>||anchor="HLocationinfo:"]]|(% style="width:87px" %)[[Longitude>>||anchor="HLocationinfo:"]]|(% style="width:76px" %)(((
373 -[[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
374 -)))|(% style="width:73px" %)[[FLAG>>||anchor="HFLAG:"]]
319 +=== 2.3.4 BLE positioning Payload(Fport2) ===
375 375  
376 -(% class="wikigeneratedid" %)
377 -[[image:1665301687277-443.png]]
378 378  
322 +Different MODE has different payload:
379 379  
324 +**MODE=2**
380 380  
381 -=== 2.4.4  Uplink FPORT~=4, History GNSS Positioning ===
326 +(% border="2" style="background-color:#ffffcc; color:green; width:491px" %)
327 +|(% style="width:70px" %)(((
328 +**Size**
382 382  
383 -
384 -Set [[PNACKMD=1>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H4.13AutoSendNone-ACKmessages]], and TrackerD will wait for ACK for every uplink, when there is no LoRaWAN network, TrackerD will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
385 -
386 -
387 -(% style="color:red" %)**Note for this mode:**
388 -
389 -* a) TrackerD will do an ACK check for data records sending to make sure every data arrive server.
390 -* b) TrackerD will send data in (% style="color:blue" %)**CONFIRMED Mode**(%%) when PNACKMD=1, but TrackerD won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink, if TrackerD gets an ACK, TrackerD will consider there is a network connection and resend all NONE-ACK Messages.
391 -
392 -The payload is 15 bytes, as below.
393 -
394 -(% border="1.5" style="background-color:#ffffcc; color:green; width:520px" %)
395 -|=(% scope="row" %)(((
396 -**Size(bytes)**
397 -)))|4|4|2|1|1|1|1|1
398 -|=**Value**|Latitude|Longitude|Year|Month|Day|Hous|Min|Sen
399 -
400 -[[image:1665301786397-168.png]]
401 -
402 -
403 -
404 -=== 2.4.5  Uplink FPORT~=6, BLE Positioning with Strongest iBeacon ===
405 -
406 -
407 -(% border="1.5" cellspacing="3" style="background-color:#ffffcc; color:green; width:450px" %)
408 -|=(% scope="row" style="width: 60px;" %)(((
409 -**Size(bytes)**
410 -)))|(% style="width:30px" %)16|(% style="width:50px" %)4|(% style="width:50px" %)4|(% style="width:120px" %)2|(% style="width:50px" %)4|(% style="width:50px" %)2|(% style="width:30px" %)1
411 -|=(% style="width: 50px;" %)**Value**|(% style="width:44px" %)[[UUID>>||anchor="HLocationinfo:"]]|(% style="width:61px" %)(((
330 +**(bytes)**
331 +)))|(% style="width:44px" %)16|(% style="width:61px" %)4|(% style="width:63px" %)4|(% style="width:71px" %)2|(% style="width:50px" %)4|(% style="width:47px" %)2|(% style="width:15px" %)1
332 +|(% style="width:70px" %)**Value**|(% style="width:44px" %)[[UUID>>||anchor="HLocationinfo:"]]|(% style="width:61px" %)(((
412 412  iBeacon MAJOR
413 413  )))|(% style="width:63px" %)(((
414 414  iBeacon MINOR
... ... @@ -431,7 +431,7 @@
431 431  * (% style="color:#037691" %)**Measured Power: ** (%%) The Measured Power from the strongest iBeacon.
432 432  * (% style="color:#037691" %)**RSSI:  ** (%%) The RSSI from the strongest iBeacon.
433 433  
434 -=== 2.4.5 Add Payload format in TTN V3 ===
355 +=== 2.3.5 Add Payload format in TTN V3 ===
435 435  
436 436  
437 437  In TTN V3, use can add a custom payload so it shows friendly.
... ... @@ -451,16 +451,12 @@
451 451  
452 452  
453 453  
454 -== 2.5 Integrate with Datacake ==
375 +== 2.4 Integrate with Datacake ==
455 455  
456 456  
457 -(((
458 458  After TrackerD sends data to LoRaWAN server such as TTN, use can pass the data to Datacake and plot out, currently only support GPS plot.
459 -)))
460 460  
461 -(((
462 462  Instruction is here:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20Data%20Cake/#H7.Example~~-~~-AddTrackerDGPSTrackingInDataCake>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20Data%20Cake/#H7.Example--AddTrackerDGPSTrackingInDataCake]]
463 -)))
464 464  
465 465  
466 466  [[image:1664502695771-538.png]]
... ... @@ -467,16 +467,12 @@
467 467  
468 468  
469 469  
470 -== 2.6 Integrate with Tago ==
387 +== 2.5 Integrate with Tago ==
471 471  
472 472  
473 -(((
474 474  After TrackerD sends data to LoRaWAN server such as TTN, use can pass the data to Datacake and plot out, currently only support GPS plot.
475 -)))
476 476  
477 -(((
478 478  Instruction is here: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Tago.IO/#H3.A0Example-CreateTrackerD2FLGT92positioningwidget>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Tago.IO/#H3.A0Example-CreateTrackerD2FLGT92positioningwidget]]
479 -)))
480 480  
481 481  
482 482  [[image:1664502715371-321.png]]
... ... @@ -483,47 +483,33 @@
483 483  
484 484  
485 485  
486 -== 2.7 Datalog Feature ==
399 +== 2.6 Alarm Mode ==
487 487  
488 -total 273 entries,by default disable
489 489  
490 -== 2.8 Alarm Mode ==
491 -
492 -
493 -(((
494 494  User can push the (% style="color:red" %)**RED button**(%%) by more than 5 seconds to enter Alarm Mode.
495 -)))
496 496  
497 497  
498 -(((
499 499  Once enter Alarm mode, the (% style="color:green" %)**GREEN LED**(%%) will flash 3 times, the buzzer will alarm for 5 seconds, then TrackerD will immediately send a packet without location info and then send a data packet with GPS positioning information. After that, the device will send 60 packets at 1-minute intervals. The Alarm flag in the payload will be set for the next 60 packets unless exit alert mode.
500 -)))
501 501  
502 502  
503 -(((
504 504  Two ways to exit alarm mode:
505 -)))
506 506  
507 507  * Server send a downlink command to exit.
508 508  * User fast press the RED button 10 times.
509 509  
510 -(((
511 511  When exit alarm mode, (% style="color:red" %)**RED LED**(%%) will light up for 5 seconds, indicating that the alarm mode is exited. And the alert flag will be set to false.
512 -)))
513 513  
514 514  
515 515  
516 -== 2.9 Transport Mode ==
417 +== 2.7 Sports Mode ~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-- ==
517 517  
518 518  
519 -In Transport Mode, TrackerD will check if there is motion. If there is no motion, device will send uplinks every 20 minutes. If there is motion, device will send uplink every 5 minutes.
520 520  
421 +== 2.8 LED Status ==
521 521  
522 -== 2.10 LED Status ==
523 523  
524 -
525 -(% border="1.5" style="background-color:#ffffcc; color:green; width:500px" %)
526 -|=(% style="width: 150px;" %)**Event**|=(% style="width: 200px;" %)**Action**|=(% style="width: 150px;" %)**AT+LON to control on/off**
424 +(% border="2" style="background-color:#ffffcc; color:green; width:636px" %)
425 +|(% style="width:157px" %)**Event**|(% style="width:271px" %)**Action**|(% style="width:202px" %)**AT+LON to control on/off**
527 527  |(% style="width:157px" %)**Power On**|(% style="width:271px" %)(% style="color:blue" %)**BLUE, **(% style="color:red" %)**RED , **(% style="color:green" %)**Green** flash once|(% style="width:202px" %)N/A
528 528  |(% style="width:157px" %)**Join request**|(% style="width:271px" %)(% style="color:green" %)**Green** (%%)led fast blink once (200ms)|(% style="width:202px" %)Yes
529 529  |(% style="width:157px" %)**Join Success**|(% style="width:271px" %)(% style="color:green" %)**Green**(%%) led on 5 second|(% style="width:202px" %)N/A
... ... @@ -536,10 +536,10 @@
536 536  |(% style="width:157px" %)**Get Downlink**|(% style="width:271px" %)(% style="color:green" %)**GREEN**(%%) led on 1 second|(% style="width:202px" %)Yes
537 537  |(% style="width:157px" %)**Movement Detect**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)led on 500ms|(% style="width:202px" %)N/A
538 538  
539 -== 2.11 Button Function ==
438 +== 2.9 Button Function ==
540 540  
541 541  
542 -(% style="color:blue" %)**RESET button:**
441 +(% style="color:green" %)**RESET button:**
543 543  
544 544  [[image:1664502835802-546.png]]
545 545  
... ... @@ -551,15 +551,16 @@
551 551  [[image:1664502854406-763.png]]
552 552  
553 553  
554 -(% border="1.5" style="background-color:#ffffcc; color:green; width:520px" %)
555 -|=(% style="width: 100px;" %)**Function**|=(% style="width: 210px;" %)**Action**|=(% style="width: 210px;" %)**Description**
453 +(% border="2" style="background-color:#ffffcc; color:green; width:627px" %)
454 +|(% style="width:135px" %)**Function**|(% style="width:220px" %)**Action**|(% style="width:265px" %)**Description**
556 556  |(% style="width:135px" %)Send Alarm|(% style="width:220px" %)Keep Pressing (% style="color:red" %)**RED**(%%) button for more than 5 seconds|(% style="width:265px" %)Enter Alarm Mode.  See [[Alarm Mode>>||anchor="H2.6AlarmMode"]]
557 557  |(% style="width:135px" %)Exit Alarm Mode|(% style="width:220px" %)Fast press the (% style="color:red" %)**RED** (%%)button 10 times|(% style="width:265px" %)Exit Alarm Mode
558 558  |(% style="width:135px" %)Enter Deep Sleep Mode|(% style="width:220px" %)Press and hold the button for 10 seconds, then quickly press the device 3 times to enter deep sleep|(% style="width:265px" %)This is the mode ship out from factory. CPU will be complete in sleep mode and no LoRa activity, only use before deploy.
559 559  
560 -== 2.12 USB Port Function ==
561 561  
460 +== 2.10 USB Port Function ==
562 562  
462 +
563 563  The USB interface of TrackerD has below functions:
564 564  
565 565  * Power on the device
... ... @@ -567,6 +567,7 @@
567 567  * [[Configure Device>>||anchor="H3.ConfigureTrackerDviaATcommandorLoRaWANdownlink"]]
568 568  * [[Upgrade Firmware>>||anchor="H5.UploadFirmware"]]
569 569  
470 +
570 570  = 3. Configure TrackerD via AT command or LoRaWAN downlink =
571 571  
572 572  
... ... @@ -639,16 +639,16 @@
639 639  
640 640  
641 641  
642 -=== 3.2.3 Set Transport Mode Packet transmission interval ===
543 +=== 3.2.3 Set Sports Mode Packet transmission interval ===
643 643  
644 644  
645 -Set Transport Mode packet transmit interval
546 +Set sports packet transmit interval
646 646  
647 647  * (% style="color:blue" %)**AT Command:**
648 648  
649 649  (% style="color:#037691" %)**AT+MTDC=xx. **
650 650  
651 -Example:  AT+MTDC=300000  **~-~->    ** Set Transport Mode Packet Interval to 300 seconds. TrackerD will send every 300 seconds in Transport mode, Default Value: 300000
552 + Example:  AT+MTDC=300000  **~-~->    ** Set Sports Mode Packet Interval to 300 seconds. TrackerD will send every 300 seconds in Sports mode, Default Value: 300000
652 652  
653 653  
654 654  * (% style="color:blue" %)**Downlink Payload (prefix 0x03):**
... ... @@ -679,7 +679,7 @@
679 679  
680 680  (% style="color:#037691" %)**AT+LON=xx.  (Disable (0), Enable (1), default:1)**
681 681  
682 -Example: AT+LON=0  **~-~-> ** Disable LED for position, downlink and uplink.
583 + Example: AT+LON=0  **~-~-> ** Disable LED for position, downlink and uplink.
683 683  
684 684  
685 685  * (% style="color:blue" %)**Downlink Payload (prefix 0xAE):**
... ... @@ -688,16 +688,16 @@
688 688  
689 689  
690 690  
691 -=== 3.2.6 Disable/Enable Transport Mode ===
592 +=== 3.2.6 Disable/Enable movement detect (Debug Only) ===
692 692  
693 693  
694 -Users can use this feature to enable/disable Transport Mode.
595 +User can use this feature to check and set thread hole of movement detect
695 695  
696 696  * (% style="color:blue" %)**AT Command:**
697 697  
698 698  (% style="color:#037691" %)**AT+INTWK=xx.  (Disable (0), Enable (1), default:0)**
699 699  
700 -Example:  AT+ INTWK =1  **~-~->   ** Enable Transport Mode.
601 + Example:  AT+ INTWK =1  **~-~->   ** Enable detect movement.
701 701  
702 702  
703 703  * (% style="color:blue" %)**Downlink Payload (prefix 0xAF):**
... ... @@ -709,30 +709,23 @@
709 709  === 3.2.7 Set Positioning Mode ===
710 710  
711 711  
712 -SMOD define the how TrackerD scan and uplink data:
613 +SMOD define the how TrackerD scan and uplink date.
713 713  
615 +GPS室外定位模式：  设备默认模式，设备入网后会发送device当前模式下的信息，随后立即定位发送数据包（默认是3分钟定位，超过将发送无效数据），如果出现意外情况下，快速按键3下，将会发出报警消息（默认每分钟发送一次）。GPS还有一种logdata模式，在断网的情况下将数据存储下来，等到有网的时候，一次将数据以每10秒上报。
714 714  
715 -* (% style="color:blue" %)**AT Command:**
617 +BLE室内定位模式：  设备入网后会发送device当前模式下的信息，随后立即定位发送数据包（默认是5秒，超过将发送无效数据），如果出现意外情况下，快速按键3下，将会发出报警消息（默认每3分钟发送一次）。
716 716  
717 -(% style="color:#037691" %)**AT+SMOD=aa,bb**
619 +GPS和BLE混动模式：设备入网后会发送device当前模式下的信息，随后立即判断是否在室内，如果是就进行BLE定位，不是就GPS定位。如果出现意外情况下，快速按键3下，将会发出报警消息（默认每分钟发送一次）。
718 718  
719 -(% style="color:#037691" %)** aa:**
621 +运动模式：  设备入网后会发送device当前模式下的信息，随后发送GPS定位数据，设备判断是否在运动，没有运动传感器没有检测到动作，立即进入静止状态（默认20分钟），如果产生运动，将每5分钟发送一次数据，再第五分钟后检测设备有误运动，无将切换到静止状态，有立即发送数据。
720 720  
721 -* (% style="color:#037691" %)**1: GPS ONLY(Factory Settings):    **(%%)only get and uplink GPS location info.
722 -* (% style="color:#037691" %)**2: BLE ONLY:              **(%%)Only obtain iBeacon info via BLE and uplink. Design for Indoor tracking.
723 -* (% style="color:#037691" %)**3: GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.Devices will try to search BLE iBeacon first. If device can't find the iBeacon, it will use GPS for positioning
724 724  
725 -(% style="color:#037691" %)**bb:**
726 726  
727 -(% style="color:#037691" %)** if aa = 1: **
625 +* (% style="color:blue" %)**AT Command:**
728 728  
729 -* (% style="color:#037691" %)**0 :  **(%%)GPS+ BAT+ State+Tem&Hum
730 -* (% style="color:#037691" %)**1 :**(%%)  GPS +BAT State
627 +(% style="color:#037691" %)**AT+SMOD=xx. **
731 731  
732 -(% style="color:#037691" %)** if aa = 2: **
733 733  
734 -* (% style="color:#037691" %)**3 :  **(%%)(iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State
735 -
736 736   **Example:**
737 737  
738 738   AT+ SMOD =1,0  **~-~-> ** GPS+ BAT+ State+Tem&Hum
... ... @@ -739,7 +739,7 @@
739 739  
740 740   AT+ SMOD =1,1    **~-~->**  GPS +BAT State
741 741  
742 - AT+ SMOD =2,3    **~-~->**  (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State
636 + AT+ SMOD =2,3    **~-~->**  (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State。
743 743  
744 744  
745 745  * (% style="color:blue" %)**Downlink Payload (prefix 0xA5):**
... ... @@ -842,7 +842,7 @@
842 842  After installation of the driver and plug in TrackerD, user should be able to see com port in PC's device manager.
843 843  
844 844  
845 -(% style="color:blue" %)**Step3:  **(%%)Download and Install Flash Tool:  [[https:~~/~~/www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools>>url:https://www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools]]
739 +(% style="color:blue" %)**Step3：**(%%) Download and Install Flash Tool:  [[https:~~/~~/www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools>>url:https://www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools]]
846 846  
847 847  
848 848  (% style="color:blue" %)**Step4:** (%%) Run Flash Download Tool and configure chip type to ESP32
... ... @@ -885,7 +885,7 @@
885 885  === 6.1.1 Set up ARDUINO compile environment ===
886 886  
887 887  
888 -* **Download the latest Arduino software (IDE) from the Arduino official website:  [[https:~~/~~/www.arduino.cc/en/Main/Software>>url:https://www.arduino.cc/en/Main/Software]]**
782 +* Download the latest Arduino software (IDE) from the Arduino official website:  [[https:~~/~~/www.arduino.cc/en/Main/Software>>url:https://www.arduino.cc/en/Main/Software]]
889 889  
890 890  Install IDE on PC, open and click (% style="color:#037691" %)**File ~-~-> Preference**,(%%) add the following URL:  [[https:~~/~~/dl.espressif.com/dl/package_esp32_index.json>>url:https://links.jianshu.com/go?to=https%3A%2F%2Fdl.espressif.com%2Fdl%2Fpackage_esp32_index.json]]
891 891  
... ... @@ -893,13 +893,13 @@
893 893  [[image:1664503635019-941.png]]
894 894  
895 895  
896 -* (% style="color:#037691" %)**Go to tools ~-~-> Boards ~-~-> Boards Manager**,(%%) **find the esp32 information and install it.**
790 +* (% style="color:#037691" %)**Go to tools ~-~-> Boards ~-~-> Boards Manager**,(%%) find the esp32 information and install it.
897 897  
898 898  [[image:1664503715811-892.png]]
899 899  
900 900  
901 901  
902 -* **Download the latest TrackerD from the dragino github: [[https:~~/~~/github.com/dragino/TrackerD>>url:https://github.com/dragino/TrackerD]]**
796 +* Download the latest TrackerD from the dragino github: [[https:~~/~~/github.com/dragino/TrackerD>>url:https://github.com/dragino/TrackerD]]
903 903  
904 904  Put the Library in the TrackerD directory into the libraries file in the Arduino directory:
905 905  
... ... @@ -946,8 +946,8 @@
946 946  
947 947  
948 948  
949 -(% border="1.5" cellspacing="3" style="background-color:#ffffcc; color:green; width:314px" %)
950 -|=(% style="width: 118px;" %)**Pin**|=(% style="width: 67px;" %)**Color**|=(% style="width: 123px;" %)**USB Pin**
843 +(% border="2" style="background-color:#ffffcc; color:green; width:314px" %)
844 +|(% style="width:118px" %)**Pin**|(% style="width:67px" %)**Color**|(% style="width:123px" %)**USB Pin**
951 951  |(% style="width:118px" %)A4,B4,A9,B9|(% style="width:67px" %)Red|(% style="width:123px" %)VCC
952 952  |(% style="width:118px" %)A7,B7|(% style="width:67px" %)White|(% style="width:123px" %)D- (N/A)
953 953  |(% style="width:118px" %)A6,B6|(% style="width:67px" %)Green|(% style="width:123px" %)D+(N/A)
... ... @@ -975,12 +975,12 @@
975 975  = 9.  Packing Info =
976 976  
977 977  
978 -(% style="color:#037691" %)**Package Includes**:
872 +**Package Includes**:
979 979  
980 980  * TrackerD LoRaWAN GPS/BLE Tracker x 1
981 981  * USB recharge & program cable x 1
982 982  
983 -(% style="color:#037691" %)**Dimensions and Weight**:
877 +**Dimensions and Weight**:
984 984  
985 985  * Device Size: 85 x 48 x 15 cm
986 986  * Weight: 50g
... ... @@ -989,7 +989,7 @@
989 989  
990 990  
991 991  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
992 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]].
886 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]]
993 993  
994 994  = 11.  Reference =
995 995  
... ... @@ -997,5 +997,3 @@
997 997  * [[**Firmware in Bin format**>>https://www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0]]
998 998  * **[[Source Code>>https://github.com/dragino/TrackerD]] **
999 999  * [[**Hardware Source**>>https://www.dropbox.com/sh/orwoy6cecb89m4e/AAD37sRuUrvKsHgAJxuVTkB5a?dl=0]]
1000 -
1001 -
1665301570342-765.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.6 KB
Content
1665301636888-168.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.6 KB
Content
1665301687277-443.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -22.6 KB
Content
1665301786397-168.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -22.6 KB
Content
image-20221006181316-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -17.7 KB
Content
image-20221006181357-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -88.0 KB
Content