Skip to Content
Last modified by Xiaoling on 2025/04/27 16:48
From version 61.1
edited by Edwin Chen
on 2022/10/08 18:27
Change comment: There is no comment for this version
To version 74.8
edited by Xiaoling
on 2022/10/11 17:08
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Xiaoling
Content
... ... @@ -1,5 +3,3 @@
1 -== ==
2 -
3 3  (% style="text-align:center" %)
4 4  [[image:1664505654417-133.png]]
5 5  
... ... @@ -99,6 +99,8 @@
99 99  * LoRa Transmit Mode: 125mA @ 20dBm 44mA @ 14dBm
100 100  * Tracking: max: 38mA
101 101  
100 +
101 +
102 102  == 1.3  Features ==
103 103  
104 104  
... ... @@ -117,6 +117,8 @@
117 117  * Tri-color LED, Alarm button
118 118  * Datalog
119 119  
120 +
121 +
120 120  == 1.4  Applications ==
121 121  
122 122  
... ... @@ -123,6 +123,8 @@
123 123  * Logistics and Supply Chain Management
124 124  * Human tracking
125 125  
128 +
129 +
126 126  = 2.1 Use TrackerD =
127 127  
128 128  
... ... @@ -185,8 +185,10 @@
185 185  (% style="color:blue" %)**Step 3:**(%%) TrackerD will auto join to the LoRaWAN network. After join success, TrackerD will start to upload message to IoT server.
186 186  
187 187  
188 -== 2.3 Positioning Mode(SMOD) ==
189 189  
193 +== 2.3  Positioning Mode(SMOD) ==
194 +
195 +
190 190  Users can set TrackerD to different Positioning Mode for different applications. Below mod are supported.
191 191  
192 192  * (% style="color:#037691" %)**GPS ONLY(Factory Settings):    **(%%)only get and uplink GPS location info.
... ... @@ -196,26 +196,31 @@
196 196  Users can switch modes by [[changing SMOD>>||anchor="H3.2.7SetPositioningMode"]].
197 197  
198 198  
199 -== 2.3 Uplink Payload ==
200 200  
206 +== 2.4  Uplink Payload ==
201 201  
202 -=== 2.3.1 Uplink FPORT~=5, Device Status ===
203 203  
204 -Uplink the device configures with FPORT=5. Once LGT92 Joined the network, it will uplink this message to the server. After first uplink, LHT52 will uplink Device Status every 12 hours.
209 +=== 2.4.1 Uplink FPORT~=5, Device Status ===
205 205  
206 -|=(% style="width: 150px;" %)**Size (bytes)**|=(% style="width: 233px;" %)**1**|=(% style="width: 150px;" %)**2**|=(% style="width: 164px;" %)**1**|=(% style="width: 215px;" %)**1**|=(% style="width: 94px;" %)2|=(% style="width: 516px;" %)**2**|=(% style="width: 516px;" %)1
207 -|(% style="width:150px" %)**Value**|(% style="width:233px" %)Sensor Model|(% style="width:150px" %)Firmware Version|(% style="width:164px" %)Frequency Band|(% style="width:215px" %)Sub-band|(% style="width:94px" %)BAT|(% style="width:516px" %)SMOD|(% style="width:516px" %)Status
208 208  
209 -[[image:image-20221006181357-2.png]]
212 +Uplink the device configures with FPORT=5. Once TrackerD Joined the network, it will uplink this message to the server. After the first uplink, TrackerD will uplink Device Status every 12 hours.
210 210  
211 -Example Payload (FPort=5):  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT52%20-%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220621105116-11.png?rev=1.1||alt="image-20220621105116-11.png"]]
212 212  
213 -**Sensor Model**: For TrackerD, this value is 0x13.
215 +(% border="1.5" style="background-color:#ffffcc; color:green; width:520px" %)
216 +|=(% scope="row" style="width: 108px;" %)**Size(bytes)**|=(% style="width: 82px;" %)**1**|=(% style="width: 83px;" %)**2**|=(% style="width: 94px;" %)**1**|=(% style="width: 84px;" %)**1**|=(% style="width: 44px;" %)2|=(% style="width: 63px;" %)**2**|=(% style="width: 60px;" %)1
217 +|=(% style="width: 108px;" %)**Value**|(% style="width:82px" %)Sensor Model|(% style="width:83px" %)Firmware Version|(% style="width:94px" %)Frequency Band|(% style="width:84px" %)Sub-band|(% style="width:44px" %)BAT|(% style="width:63px" %)SMOD|(% style="width:60px" %)Status
214 214  
215 -**Firmware Version**: 0x0100, Means: v1.0.0 version.
219 +[[image:1665301570342-765.png]]
216 216  
217 -**Frequency Band**:
218 218  
222 +(% style="color:#037691" %)**Example of Device Status:**(%%) 13014001FF0FA24002
223 +
224 +(% style="color:#037691" %)**Sensor Model:** (%%) For TrackerD,this value is 0x13
225 +
226 +(% style="color:#037691" %)**Firmware Version: **(%%) 0x0140,Means:v1.4.0 version
227 +
228 +(% style="color:#037691" %)**Frequency Band**:
229 +
219 219  *0x01: EU868
220 220  
221 221  *0x02: US915
... ... @@ -236,18 +236,58 @@
236 236  
237 237  *0x0a: AS923-3
238 238  
239 -**Sub-Band**: value 0x00 ~~ 0x08(only for CN470, AU915,US915. Others are0x00)
250 +Sub- Band:value 0x00~~0x08(only forAU915,US915,Others are 0xFF)
240 240  
241 -**BAT**: shows the battery voltage for TrackerD.
252 +(% style="color:#037691" %)**BAT:**(%%) shows the battery voltage for TrackerD.
242 242  
243 -Ex1: 0x0B3A = 2874mV
244 244  
255 +(% style="color:#037691" %)**Ex1:**(%%) 0x0FA2 = 4002mV
256 +
245 245  Use can also get the Device Status uplink through the downlink command:
246 246  
259 +TrackerD Model：0x40
247 247  
248 -=== 2.3.2 Uplink FPORT~=2, Realtime GNSS Positioning + Temperature & Humidity ===
261 +(% border="1.5" style="background-color:#ffffcc; color:green; width:314px" %)
262 +|(% style="width:75px" %)**Size(bit)**|(% style="width:64px" %)2bits|(% style="width:88px" %)2bit|(% style="width:84px" %)4bit
263 +|(% style="width:75px" %)**Value**|(% style="width:64px" %)SMOD|(% style="width:88px" %)GPS_MOD|(% style="width:84px" %)BLE_MOD
249 249  
265 +(% style="color:blue" %)**SMOD：**
250 250  
267 +(% style="color:red" %)**1 :** (%%) GPS ONLY
268 +
269 +(% style="color:red" %)**2 :** (%%) BLE ONLY
270 +
271 +(% style="color:red" %)**3 :**  (%%) GPS/BLE Hybrid
272 +
273 +
274 +(% style="color:blue" %)**GPS MOD:**
275 +
276 +(% style="color:red" %)**0 : ** (%%) Enable uploading on-board Temperature and humidity values
277 +
278 +(% style="color:red" %)**1 :** (%%) Disable uploading on-board Temperature and humidity values
279 +
280 +
281 +(% style="color:blue" %)**BLE MOD:**
282 +
283 +(% style="color:red" %)**1: ** (%%) BLE Positioning with Strongest iBeacon
284 +
285 +TrackerD Status:  0x02
286 +
287 +(% border="1.5" style="background-color:#ffffcc; color:green; width:345px" %)
288 +|(% style="width:77px" %)**Size(bit)**|(% style="width:91px" %)1bits|(% style="width:48px" %)1bit|(% style="width:126px" %)1bit
289 +|(% style="width:77px" %)**Value**|(% style="width:91px" %)PNACKMD|(% style="width:48px" %)LON|(% style="width:126px" %)Transport** **Mode
290 +
291 +(% style="color:red" %)**0 : **(%%) Transport Mode
292 +
293 +(% style="color:red" %)**1 :  **(%%) AT+LON
294 +
295 +(% style="color:red" %)**2 : **(%%) Datalog Enable/Disable
296 +
297 +
298 +
299 +=== 2.4.2 Uplink FPORT~=2, Realtime GNSS Positioning + Temperature & Humidity ===
300 +
301 +
251 251  User can use **AT+SMOD=1,0** to enable uploading on-board Temperature and humidity values, and the total payload will be 15 bytes, please note that 15 bytes won't work on DR0 on US915/AU915 frequency band.
252 252  
253 253  
... ... @@ -263,7 +263,7 @@
263 263  [[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
264 264  )))|(% style="width:73px" %)[[FLAG>>||anchor="HFLAG:"]]|(% style="width:40px" %)[[Hum>>||anchor="HHum:"]]|(% style="width:87px" %)[[Tem>>||anchor="HTem:"]]
265 265  
266 -[[image:1664501958445-288.png]]
317 +[[image:1665301636888-168.png]]
267 267  
268 268  
269 269  ==== (% style="color:blue" %)**Alarm & BAT:**(%%) ====
... ... @@ -272,6 +272,8 @@
272 272  |=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)1 bit|(% style="width:80px" %)1bit|(% style="width:50px" %)14bits
273 273  |=(% style="width: 72px;" %)**Value**|(% style="width:67px" %)reserve|(% style="width:118px" %)Alarm Indicate|(% style="width:63px" %)[[BAT>>||anchor="HBAT:"]] 
274 274  
326 +
327 +
275 275  ==== (% style="color:blue" %)**FLAG:**(%%) ====
276 276  
277 277  (% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:250px" %)
... ... @@ -286,6 +286,7 @@
286 286  * Latitude: 02863D68  ⇒  //if (0x//02863D68//& 0x80000000 = 0 )~://  //value = 02863D68 /1000000 = 42.351976//
287 287  * Longitude: FAC29BAF  ⇒ //if (0x//FAC29BAF// & 0x80000000 = 1 )~://  //value = (0x//FAC29BAF// – 0x 100000000)/1000000 =//-87.9094//57//
288 288  
342 +
289 289  (% style="color:red" %)**Important note:**
290 290  
291 291  1.  When power is low (<2.84v), GPS won't be able to get location info and GPS feature will be disabled and the location field will be filled with 0x0FFFFFFF, 0x0FFFFFFF.
... ... @@ -309,7 +309,7 @@
309 309  
310 310  ==== (% style="color:blue" %)**BAT:**(%%) ====
311 311  
312 -Example:  0x0CDD & 0x3FFF ⇒ 3293 (mV).
366 +Example: 0x4B45 & 0x3FFF ⇒ 2885 (mV).
313 313  
314 314  (((
315 315  The battery info shows the battery voltage, User can use the below mapping to indicate the battery in percentage: \
... ... @@ -321,16 +321,35 @@
321 321  * 3.40v ~~ 3.69v:  20% ~~ 40%
322 322  * < 3.39v:  0~~20%
323 323  
378 +
379 +
380 +==== (% style="color:blue" %)**MOD:**(%%) ====
381 +
382 +mod = (0x60>>6)& 0x3f;
383 +
384 +**Set the format of GPS data uplink link：**
385 +
386 +(% style="color:#037691" %)**0x00:** (%%) Enable uploading on-board Temperature and humidity values
387 +(% style="color:#037691" %)**0x01: ** (%%) Disable uploading on-board Temperature and humidity values
388 +
389 +
390 +**Set the format of BLE data uplink link：**
391 +
392 +(% style="color:#037691" %)**0x01: ** (%%) BLE Positioning with Strongest iBeacon
393 +
394 +
324 324  ==== (% style="color:blue" %)**LON:**(%%) ====
325 325  
397 +lon=(0x60>>5) & 0x01;
398 +
326 326  Enable/Disable LED activity for uplink
327 327  
328 328  (((
329 -0x00:  Disable LED indicator.
402 +(% style="color:#037691" %)**0x00:**  (%%) Disable LED indicator.
330 330  )))
331 331  
332 332  (((
333 -0x01:  Enable LED indicator (Default Value)
406 +(% style="color:#037691" %)**0x01:**  (%%) Enable LED indicator (Default Value)
334 334  )))
335 335  
336 336  
... ... @@ -344,8 +344,10 @@
344 344  011A =if (0x011A & 0x8000 = 1 ):  value =( 0x011A - 0x10000)/10(dec) ⇒ -//28.2 degree//
345 345  
346 346  
347 -=== 2.3.3  Uplink FPORT~=3, Realtime GNSS Positioning (Default Mode) ===
348 348  
421 +=== 2.4.3  Uplink FPORT~=3, Realtime GNSS Positioning (Default Mode) ===
422 +
423 +
349 349  The default uplink payload includes totally 11 bytes. The payload is the first 11 bytes of Uplink FPORT=2, real-time GNSS positioning, (remove the temp and humidity)
350 350  
351 351  
... ... @@ -357,23 +357,37 @@
357 357  [[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
358 358  )))|(% style="width:73px" %)[[FLAG>>||anchor="HFLAG:"]]
359 359  
435 +(% class="wikigeneratedid" %)
436 +[[image:1665301687277-443.png]]
360 360  
361 -=== 2.3.4  Uplink FPORT~=4, History GNSS Positioning ===
362 362  
439 +
440 +=== 2.4.4  Uplink FPORT~=4, History GNSS Positioning ===
441 +
442 +
363 363  Set [[PNACKMD=1>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H4.13AutoSendNone-ACKmessages]], and TrackerD will wait for ACK for every uplink, when there is no LoRaWAN network, TrackerD will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
364 364  
365 -**Note for this mode:**
366 366  
446 +(% style="color:red" %)**Note for this mode:**
447 +
367 367  * a) TrackerD will do an ACK check for data records sending to make sure every data arrive server.
368 -* b) TrackerD will send data in **CONFIRMED Mode** when PNACKMD=1, but TrackerD won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink, if TrackerD gets an ACK, TrackerD will consider there is a network connection and resend all NONE-ACK Messages.
449 +* b) TrackerD will send data in (% style="color:blue" %)**CONFIRMED Mode**(%%) when PNACKMD=1, but TrackerD won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink, if TrackerD gets an ACK, TrackerD will consider there is a network connection and resend all NONE-ACK Messages.
369 369  
370 370  The payload is 15 bytes, as below.
371 371  
453 +(% border="1.5" style="background-color:#ffffcc; color:green; width:520px" %)
454 +|=(% scope="row" %)(((
455 +**Size(bytes)**
456 +)))|4|4|2|1|1|1|1|1
457 +|=**Value**|Latitude|Longitude|Year|Month|Day|Hous|Min|Sen
372 372  
459 +[[image:image-20221009160309-2.png]]
373 373  
374 -=== 2.3.5  Uplink FPORT~=6, BLE Positioning with Strongest iBeacon ===
375 375  
376 376  
463 +=== 2.4.5  Uplink FPORT~=6, BLE Positioning with Strongest iBeacon ===
464 +
465 +
377 377  (% border="1.5" cellspacing="3" style="background-color:#ffffcc; color:green; width:450px" %)
378 378  |=(% scope="row" style="width: 60px;" %)(((
379 379  **Size(bytes)**
... ... @@ -401,9 +401,11 @@
401 401  * (% style="color:#037691" %)**Measured Power: ** (%%) The Measured Power from the strongest iBeacon.
402 402  * (% style="color:#037691" %)**RSSI:  ** (%%) The RSSI from the strongest iBeacon.
403 403  
404 -=== 2.3.5 Add Payload format in TTN V3 ===
405 405  
406 406  
495 +=== 2.4.6  Add Payload format in TTN V3 ===
496 +
497 +
407 407  In TTN V3, use can add a custom payload so it shows friendly.
408 408  
409 409  In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**
... ... @@ -421,7 +421,7 @@
421 421  
422 422  
423 423  
424 -== 2.4 Integrate with Datacake ==
515 +== 2.5 Integrate with Datacake ==
425 425  
426 426  
427 427  (((
... ... @@ -437,7 +437,7 @@
437 437  
438 438  
439 439  
440 -== 2.5 Integrate with Tago ==
531 +== 2.6 Integrate with Tago ==
441 441  
442 442  
443 443  (((
... ... @@ -453,12 +453,24 @@
453 453  
454 454  
455 455  
456 -== 2.6 Datalog Feature ==
547 +== 2.7  Datalog Feature ==
457 457  
458 458  
459 -== 2.6 Alarm Mode ==
550 +total 273 entries,by default disable
460 460  
461 461  
553 +Example use case.
554 +
555 +[[image:image-20221009234703-2.png||height="328" width="899"]]
556 +
557 +
558 +[[image:image-20221009234629-1.png||height="390" width="577"]]
559 +
560 +
561 +
562 +== 2.8 Alarm Mode ==
563 +
564 +
462 462  (((
463 463  User can push the (% style="color:red" %)**RED button**(%%) by more than 5 seconds to enter Alarm Mode.
464 464  )))
... ... @@ -482,15 +482,16 @@
482 482  
483 483  
484 484  
485 -== 2.7 Transport Mode ==
588 +== 2.9 Transport Mode ==
486 486  
487 487  
488 488  In Transport Mode, TrackerD will check if there is motion. If there is no motion, device will send uplinks every 20 minutes. If there is motion, device will send uplink every 5 minutes.
489 489  
490 490  
491 -== 2.8 LED Status ==
492 492  
595 +== 2.10 LED Status ==
493 493  
597 +
494 494  (% border="1.5" style="background-color:#ffffcc; color:green; width:500px" %)
495 495  |=(% style="width: 150px;" %)**Event**|=(% style="width: 200px;" %)**Action**|=(% style="width: 150px;" %)**AT+LON to control on/off**
496 496  |(% style="width:157px" %)**Power On**|(% style="width:271px" %)(% style="color:blue" %)**BLUE, **(% style="color:red" %)**RED , **(% style="color:green" %)**Green** flash once|(% style="width:202px" %)N/A
... ... @@ -505,9 +505,12 @@
505 505  |(% style="width:157px" %)**Get Downlink**|(% style="width:271px" %)(% style="color:green" %)**GREEN**(%%) led on 1 second|(% style="width:202px" %)Yes
506 506  |(% style="width:157px" %)**Movement Detect**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)led on 500ms|(% style="width:202px" %)N/A
507 507  
508 -== 2.9 Button Function ==
509 509  
510 510  
614 +
615 +== 2.11 Button Function ==
616 +
617 +
511 511  (% style="color:blue" %)**RESET button:**
512 512  
513 513  [[image:1664502835802-546.png]]
... ... @@ -526,9 +526,12 @@
526 526  |(% style="width:135px" %)Exit Alarm Mode|(% style="width:220px" %)Fast press the (% style="color:red" %)**RED** (%%)button 10 times|(% style="width:265px" %)Exit Alarm Mode
527 527  |(% style="width:135px" %)Enter Deep Sleep Mode|(% style="width:220px" %)Press and hold the button for 10 seconds, then quickly press the device 3 times to enter deep sleep|(% style="width:265px" %)This is the mode ship out from factory. CPU will be complete in sleep mode and no LoRa activity, only use before deploy.
528 528  
529 -== 2.10 USB Port Function ==
530 530  
531 531  
638 +
639 +== 2.12 USB Port Function ==
640 +
641 +
532 532  The USB interface of TrackerD has below functions:
533 533  
534 534  * Power on the device
... ... @@ -536,6 +536,8 @@
536 536  * [[Configure Device>>||anchor="H3.ConfigureTrackerDviaATcommandorLoRaWANdownlink"]]
537 537  * [[Upgrade Firmware>>||anchor="H5.UploadFirmware"]]
538 538  
649 +
650 +
539 539  = 3. Configure TrackerD via AT command or LoRaWAN downlink =
540 540  
541 541  
... ... @@ -683,41 +683,33 @@
683 683  
684 684  * (% style="color:blue" %)**AT Command:**
685 685  
686 -(% style="color:#037691" %)**AT+SMOD=aa,bb**
798 +(% style="color:#037691" %)**AT+SMOD=aa,bb,cc**
687 687  
688 688  (% style="color:#037691" %)** aa:**
689 689  
690 -* (% style="color:#037691" %)**1: GPS ONLY(Factory Settings):    **(%%)only get and uplink GPS location info.
691 -* (% style="color:#037691" %)**2: BLE ONLY:              **(%%)Only obtain iBeacon info via BLE and uplink. Design for Indoor tracking.
692 -* (% style="color:#037691" %)**3: GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.Devices will try to search BLE iBeacon first. If device can't find the iBeacon, it will use GPS for positioning
802 +* (% style="color:red" %)**1: GPS ONLY(Factory Settings):    **(%%)only get and uplink GPS location info.
803 +* (% style="color:red" %)**2: BLE ONLY:              **(%%)Only obtain iBeacon info via BLE and uplink. Design for Indoor tracking.
804 +* (% style="color:red" %)**3: GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.Devices will try to search BLE iBeacon first. If device can't find the iBeacon, it will use GPS for positioning.
693 693  
694 -
695 695  (% style="color:#037691" %)**bb:**
696 696  
697 -(% style="color:#037691" %)** if aa = 1: **
808 +* (% style="color:red" %)**0 :  **(%%)GPS+ BAT+ State+Tem&Hum
809 +* (% style="color:red" %)**1 :**(%%)  GPS +BAT State
698 698  
699 -* (% style="color:#037691" %)**0 :  **(%%)GPS+ BAT+ State+Tem&Hum
700 -* (% style="color:#037691" %)**1 :**(%%)  GPS +BAT State
811 +(% style="color:#037691" %)**cc:   **
701 701  
813 +* (% style="color:red" %)**1 : **(%%) (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State  
702 702  
703 -(% style="color:#037691" %)** if aa = 2: **
815 +(% style="color:blue" %)**Example:**
704 704  
705 -* (% style="color:#037691" %)**3 :  **(%%)(iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State
817 + AT+ SMOD =1,0 ,0 ~-~->  GPS+ BAT+ State+Tem&Hum
818 + AT+ SMOD =1,1,0 ~-~->  GPS +BAT State
819 + AT+ SMOD =2,0,1 ~-~->  (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State
706 706  
707 707  
708 -
709 - **Example:**
710 -
711 - AT+ SMOD =1,0  **~-~-> ** GPS+ BAT+ State+Tem&Hum
712 -
713 - AT+ SMOD =1,1    **~-~->**  GPS +BAT State
714 -
715 - AT+ SMOD =2,3    **~-~->**  (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State
716 -
717 -
718 718  * (% style="color:blue" %)**Downlink Payload (prefix 0xA5):**
719 719  
720 -(% style="color:#037691" %)**0xA5 01 00**    (%%) ~/~/  Same as AT+ SMOD =1,0
824 +(% style="color:#037691" %)**0xA5 01 00 00**    (%%) ~/~/  Same as AT+ SMOD =1,0,0
721 721  
722 722  
723 723  
... ... @@ -734,7 +734,7 @@
734 734  
735 735  (% style="color:#037691" %)**AT+FTIME=xx**  (%%) **~-~-> ** Set to use xx as max fix time.
736 736  
737 -Example:  AT+FTIME=150
841 +**Example:**  AT+FTIME=150
738 738  
739 739  
740 740  * (% style="color:blue" %)**Downlink Payload (prefix 0xAA):**
... ... @@ -743,7 +743,7 @@
743 743  
744 744  
745 745  
746 -=== 3.3.9 Set PDOP value for GPS fix accuracy ===
850 +=== 3.2.9 Set PDOP value for GPS fix accuracy ===
747 747  
748 748  
749 749  PDOP(Position Dilution of Precision) filter, TrackerD will only accept GPS data with a lower PDOP value than pre-configure PDOP value. If device can't get a valid GPS packet within FTIME timeout, it will use the GPS data with lowest PDOP value to server.
... ... @@ -771,7 +771,7 @@
771 771  
772 772  * (% style="color:blue" %)**AT Command:**
773 773  
774 -(% style="color:#037691" %)**AT+CFM=xx. **
878 +(% style="color:#037691" %)**AT+CFM=xx**
775 775  
776 776  
777 777  **~ Example:**
... ... @@ -787,6 +787,27 @@
787 787  
788 788  
789 789  
894 +=== 3.2.10  Auto Send None-ACK messages ===
895 +
896 +
897 +TrackerD will wait for ACK for each uplink, If TrackerD doesn't get ACK from the IoT server, it will consider the message doesn't arrive server and store it. TrackerD keeps sending messages in normal periodically. Once TrackerD gets ACK from a server, it will consider the network is ok and start to send the not-arrive message.
898 +
899 +
900 +* (% style="color:blue" %)**AT Command: AT+PNACKMD**
901 +
902 +The default factory setting is 0.
903 +
904 +
905 +**Command Example Function Response:**
906 +
907 +(% style="color:#037691" %)**AT+PNACKMD=1**  (%%) ~/~/  Poll None-ACK message OK
908 +
909 +
910 +* (% style="color:blue" %)**Downlink Command: 0x34**
911 +
912 +Example: 0x3401  ~/~/  Same as AT+PNACKMD=1
913 +
914 +
790 790  = 4. Setting for Different Scenarios =
791 791  
792 792  
... ... @@ -829,7 +829,7 @@
829 829  
830 830  (% style="color:blue" %)**Step5:** (%%) Select the firmware file (.bin format), com port and proper SPI configure. Clink Start. Bin file location:
831 831  
832 -[[https:~~/~~/www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0>>url:https://www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0]]
957 +[[https:~~/~~/github.com/dragino/TrackerD/releases>>https://github.com/dragino/TrackerD/releases]]
833 833  
834 834  
835 835  Users need to use below files:
... ... @@ -866,6 +866,7 @@
866 866  [[image:1664503635019-941.png]]
867 867  
868 868  
994 +
869 869  * (% style="color:#037691" %)**Go to tools ~-~-> Boards ~-~-> Boards Manager**,(%%) **find the esp32 information and install it.**
870 870  
871 871  [[image:1664503715811-892.png]]
... ... @@ -930,6 +930,9 @@
930 930  |(% style="width:118px" %)A8|(% style="width:67px" %)Yellow|(% style="width:123px" %)MTMS/GPIO14
931 931  |(% style="width:118px" %)B8|(% style="width:67px" %)Grey|(% style="width:123px" %)MTDO/GPIO15
932 932  
1059 +
1060 +
1061 +
933 933  = 8.  Order Info =
934 934  
935 935  
... ... @@ -945,6 +945,8 @@
945 945  * (% style="color:red" %)**AU915**(%%): Default frequency band AU915
946 946  * (% style="color:red" %)**US915**(%%): Default frequency band US915
947 947  
1077 +
1078 +
948 948  = 9.  Packing Info =
949 949  
950 950  
... ... @@ -958,6 +958,8 @@
958 958  * Device Size: 85 x 48 x 15 cm
959 959  * Weight: 50g
960 960  
1092 +
1093 +
961 961  = 10. Support =
962 962  
963 963  
... ... @@ -964,6 +964,8 @@
964 964  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
965 965  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]].
966 966  
1100 +
1101 +
967 967  = 11.  Reference =
968 968  
969 969  
1665301570342-765.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.6 KB
Content
1665301636888-168.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +36.6 KB
Content
1665301687277-443.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +22.6 KB
Content
1665301786397-168.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +22.6 KB
Content
image-20221009160220-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +46.4 KB
Content
image-20221009160309-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +57.2 KB
Content
image-20221009234629-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +222.9 KB
Content
image-20221009234703-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +136.4 KB
Content