Last modified by Xiaoling on 2025/04/14 16:33
<
From version < 60.2 >
edited by Edwin Chen
on 2022/10/08 18:26
To version < 55.1 >
edited by Edwin Chen
on 2022/10/06 18:45
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -201,10 +201,10 @@
201 201  
202 202  === 2.3.1 Uplink FPORT~=5, Device Status ===
203 203  
204 -Uplink the device configures with FPORT=5. Once LGT92 Joined the network, it will uplink this message to the server. After first uplink, LHT52 will uplink Device Status every 12 hours.
204 +Uplink the device configures with FPORT=5. Once LHT52 Joined the network, it will uplink this message to the server. After first uplink, LHT52 will uplink Device Status every 12 hours.
205 205  
206 -|=(% style="width: 150px;" %)**Size (bytes)**|=(% style="width: 233px;" %)**1**|=(% style="width: 150px;" %)**2**|=(% style="width: 164px;" %)**1**|=(% style="width: 215px;" %)**1**|=(% style="width: 94px;" %)2|=(% style="width: 516px;" %)**2**|=(% style="width: 516px;" %)1
207 -|(% style="width:150px" %)**Value**|(% style="width:233px" %)Sensor Model|(% style="width:150px" %)Firmware Version|(% style="width:164px" %)Frequency Band|(% style="width:215px" %)Sub-band|(% style="width:94px" %)BAT|(% style="width:516px" %)SMOD|(% style="width:516px" %)Status
206 +|=**Size (bytes)**|=**1**|=**2**|=**1**|=**1**|=**2**
207 +|**Value**|Sensor Model|Firmware Version|Frequency Band|Sub-band|BAT
208 208  
209 209  [[image:image-20221006181357-2.png]]
210 210  
... ... @@ -245,23 +245,23 @@
245 245  Use can also get the Device Status uplink through the downlink command:
246 246  
247 247  
248 -=== 2.3.2 Uplink FPORT~=2, Realtime GNSS Positioning + Temperature & Humidity ===
248 +=== 2.3.2 Uplink FPORT~=2, Realtime GNSS Positioning ===
249 249  
250 250  
251 -User can use **AT+SMOD=1,0** to enable uploading on-board Temperature and humidity values, and the total payload will be 15 bytes, please note that 15 bytes won't work on DR0 on US915/AU915 frequency band.
251 +The default uplink payload includes totally 11 bytes. (User can use AT+SMOD=1,0 to enable uploading on-board Temperature and humidity value, and total payload will be 15 bytes, please note 15 bytes won't work on DR0 on US915/AU915 frequency band. )
252 252  
253 253  
254 254  (% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:480px" %)
255 255  |=(% scope="row" style="width: 50px;" %)(((
256 256  **Size(bytes)**
257 -)))|(% style="width:60px" %)4|(% style="width:70px" %)4|(% style="width:80px" %)2|(% style="width:73px" %)1|(% style="width:40px" %)(((
258 -2
257 +)))|(% style="width:60px" %)4|(% style="width:70px" %)4|(% style="width:80px" %)2|(% style="width:50px" %)1|(% style="width:88px" %)(((
258 +2(optional)
259 259  )))|(% style="width:87px" %)(((
260 -2
260 +2(optional)
261 261  )))
262 262  |=(% style="width: 69px;" %)**Value**|(% style="width:76px" %)[[Latitude>>||anchor="HLocationinfo:"]]|(% style="width:87px" %)[[Longitude>>||anchor="HLocationinfo:"]]|(% style="width:76px" %)(((
263 263  [[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
264 -)))|(% style="width:73px" %)[[FLAG>>||anchor="HFLAG:"]]|(% style="width:40px" %)[[Hum>>||anchor="HHum:"]]|(% style="width:87px" %)[[Tem>>||anchor="HTem:"]]
264 +)))|(% style="width:52px" %)[[FLAG>>||anchor="HFLAG:"]]|(% style="width:88px" %)[[Hum>>||anchor="HHum:"]]|(% style="width:87px" %)[[Tem>>||anchor="HTem:"]]
265 265  
266 266  [[image:1664501958445-288.png]]
267 267  
... ... @@ -275,8 +275,8 @@
275 275  ==== (% style="color:blue" %)**FLAG:**(%%) ====
276 276  
277 277  (% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:250px" %)
278 -|=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)2bits|(% style="width:50px" %)1bit
279 -|=(% style="width: 79px;" %)**Value**|(% style="width:55px" %)[[MOD>>||anchor="H3.2.7SetPositioningMode"]]|(% style="width:47px" %)[[LON>>||anchor="HLON:"]]
278 +|=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)2bits|(% style="width:50px" %)1bit|(% style="width:100px" %)5 bits
279 +|=(% style="width: 79px;" %)**Value**|(% style="width:55px" %)[[MOD>>||anchor="H3.2.7SetPositioningMode"]]|(% style="width:47px" %)[[LON>>||anchor="HLON:"]]|(% style="width:140px" %)Firmware version 
280 280  
281 281  **Example:** Payload: 0x02863D68 FAC29BAF 4B45 60 0202 011A 
282 282  
... ... @@ -290,14 +290,15 @@
290 290  
291 291  1.  When power is low (<2.84v), GPS won't be able to get location info and GPS feature will be disabled and the location field will be filled with 0x0FFFFFFF, 0x0FFFFFFF.
292 292  
293 -2.  In this mode, the total payload will be 15 bytes, while US915/AU915 DR0 accepts only 11 bytes payload. In this case, the payload on server will be ignore and shows as below:
293 +2.  When enable 9-axis motion sensor, the total payload will be 15 bytes, while US915/AU915 DR0 accepts only 11 bytes payload. In this case, the payload on server will be ignore and shows as below:
294 294  
295 295  
296 296  [[image:1664502116362-706.png]]
297 297  
298 298  
299 -3.  While GPS can't get location info after timeout(FTIME Parameter), the latitude and longitude will be filled with all 0x00:
300 300  
300 +4.  While GPS can't get location info after timeout(FTIME Parameter), the latitude and longitude will be filled with all 0x00:
301 +
301 301  [[image:1664502166010-515.png]]
302 302  
303 303  
... ... @@ -312,7 +312,7 @@
312 312  Example:  0x0CDD & 0x3FFF ⇒ 3293 (mV).
313 313  
314 314  (((
315 -The battery info shows the battery voltage, User can use the below mapping to indicate the battery in percentage: \
316 +The battery info shows the current voltage, for (% style="color:blue" %)**TrackerD**(%%) version which powered by li-on battery. User can use below mapping to indicate the battery in percentage: \
316 316  )))
317 317  
318 318  * > 4.0v :  80% ~~ 100%
... ... @@ -321,6 +321,7 @@
321 321  * 3.40v ~~ 3.69v:  20% ~~ 40%
322 322  * < 3.39v:  0~~20%
323 323  
325 +
324 324  ==== (% style="color:blue" %)**LON:**(%%) ====
325 325  
326 326  Enable/Disable LED activity for uplink
... ... @@ -344,36 +344,16 @@
344 344  011A =if (0x011A & 0x8000 = 1 ):  value =( 0x011A - 0x10000)/10(dec) ⇒ -//28.2 degree//
345 345  
346 346  
347 -=== 2.3.3  Uplink FPORT~=3, Realtime GNSS Positioning (Default Mode) ===
348 348  
349 -The default uplink payload includes totally 11 bytes. The payload is the first 11 bytes of Uplink FPORT=2, real-time GNSS positioning, (remove the temp and humidity)
350 +=== 2.3.3 Uplink FPORT~= , History GNSS Positioning ===
350 350  
351 351  
352 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:480px" %)
353 -|=(% scope="row" style="width: 50px;" %)(((
354 -**Size(bytes)**
355 -)))|(% style="width:60px" %)4|(% style="width:70px" %)4|(% style="width:80px" %)2|(% style="width:73px" %)1
356 -|=(% style="width: 69px;" %)**Value**|(% style="width:76px" %)[[Latitude>>||anchor="HLocationinfo:"]]|(% style="width:87px" %)[[Longitude>>||anchor="HLocationinfo:"]]|(% style="width:76px" %)(((
357 -[[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
358 -)))|(% style="width:73px" %)[[FLAG>>||anchor="HFLAG:"]]
359 359  
354 +=== 2.3.4 BLE positioning Payload(Fport2) ===
360 360  
361 -=== 2.3.4  Uplink FPORT~=4, History GNSS Positioning ===
362 362  
363 -Set [[PNACKMD=1>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H4.13AutoSendNone-ACKmessages]], and TrackerD will wait for ACK for every uplink, when there is no LoRaWAN network, TrackerD will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
357 +Different MODE has different payload:  (% style="color:blue" %)**MODE=2**
364 364  
365 -**Note for this mode:**
366 -
367 -* a) TrackerD will do an ACK check for data records sending to make sure every data arrive server.
368 -* b) TrackerD will send data in **CONFIRMED Mode** when PNACKMD=1, but TrackerD won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink, if TrackerD gets an ACK, TrackerD will consider there is a network connection and resend all NONE-ACK Messages.
369 -
370 -The payload is 15 bytes, as below.
371 -
372 -
373 -
374 -=== 2.3.5  Uplink FPORT~=6, BLE Positioning with Strongest iBeacon ===
375 -
376 -
377 377  (% border="1.5" cellspacing="3" style="background-color:#ffffcc; color:green; width:450px" %)
378 378  |=(% scope="row" style="width: 60px;" %)(((
379 379  **Size(bytes)**
... ... @@ -453,9 +453,6 @@
453 453  
454 454  
455 455  
456 -== 2.6 Datalog Feature ==
457 -
458 -
459 459  == 2.6 Alarm Mode ==
460 460  
461 461  
... ... @@ -482,10 +482,10 @@
482 482  
483 483  
484 484  
485 -== 2.7 Transport Mode ==
464 +== 2.7 Sports Mode ==
486 486  
487 487  
488 -In Transport Mode, TrackerD will check if there is motion. If there is no motion, device will send uplinks every 20 minutes. If there is motion, device will send uplink every 5 minutes.
467 +In Sports Mode, TrackerD will check if there is motion. If there is no motion, device will send uplinks every 20 minutes. If there is motion, device will send uplink every 5 minutes.
489 489  
490 490  
491 491  == 2.8 LED Status ==
... ... @@ -608,16 +608,16 @@
608 608  
609 609  
610 610  
611 -=== 3.2.3 Set Transport Mode Packet transmission interval ===
590 +=== 3.2.3 Set Sports Mode Packet transmission interval ===
612 612  
613 613  
614 -Set Transport Mode packet transmit interval
593 +Set sports packet transmit interval
615 615  
616 616  * (% style="color:blue" %)**AT Command:**
617 617  
618 618  (% style="color:#037691" %)**AT+MTDC=xx. **
619 619  
620 -Example:  AT+MTDC=300000  **~-~->    ** Set Transport Mode Packet Interval to 300 seconds. TrackerD will send every 300 seconds in Transport mode, Default Value: 300000
599 +Example:  AT+MTDC=300000  **~-~->    ** Set Sports Mode Packet Interval to 300 seconds. TrackerD will send every 300 seconds in Sports mode, Default Value: 300000
621 621  
622 622  
623 623  * (% style="color:blue" %)**Downlink Payload (prefix 0x03):**
... ... @@ -657,16 +657,16 @@
657 657  
658 658  
659 659  
660 -=== 3.2.6 Disable/Enable Transport Mode ===
639 +=== 3.2.6 Disable/Enable movement detect (Debug Only) ===
661 661  
662 662  
663 -Users can use this feature to enable/disable Transport Mode.
642 +User can use this feature to check and set thread hole of movement detect
664 664  
665 665  * (% style="color:blue" %)**AT Command:**
666 666  
667 667  (% style="color:#037691" %)**AT+INTWK=xx.  (Disable (0), Enable (1), default:0)**
668 668  
669 -Example:  AT+ INTWK =1  **~-~->   ** Enable Transport Mode.
648 +Example:  AT+ INTWK =1  **~-~->   ** Enable detect movement.
670 670  
671 671  
672 672  * (% style="color:blue" %)**Downlink Payload (prefix 0xAF):**
... ... @@ -683,29 +683,9 @@
683 683  
684 684  * (% style="color:blue" %)**AT Command:**
685 685  
686 -(% style="color:#037691" %)**AT+SMOD=aa,bb**
665 +(% style="color:#037691" %)**AT+SMOD=xx. **
687 687  
688 -(% style="color:#037691" %)** aa:**
689 689  
690 -* (% style="color:#037691" %)**1: GPS ONLY(Factory Settings):    **(%%)only get and uplink GPS location info.
691 -* (% style="color:#037691" %)**2: BLE ONLY:              **(%%)Only obtain iBeacon info via BLE and uplink. Design for Indoor tracking.
692 -* (% style="color:#037691" %)**3: GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.Devices will try to search BLE iBeacon first. If device can't find the iBeacon, it will use GPS for positioning
693 -
694 -
695 -(% style="color:#037691" %)**bb:**
696 -
697 -(% style="color:#037691" %)** if aa = 1: **
698 -
699 -* (% style="color:#037691" %)**0 :  **(%%)GPS+ BAT+ State+Tem&Hum
700 -* (% style="color:#037691" %)**1 :**(%%)  GPS +BAT State
701 -
702 -
703 -(% style="color:#037691" %)** if aa = 2: **
704 -
705 -* (% style="color:#037691" %)**3 :  **(%%)(iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State
706 -
707 -
708 -
709 709   **Example:**
710 710  
711 711   AT+ SMOD =1,0  **~-~-> ** GPS+ BAT+ State+Tem&Hum
... ... @@ -712,7 +712,7 @@
712 712  
713 713   AT+ SMOD =1,1    **~-~->**  GPS +BAT State
714 714  
715 - AT+ SMOD =2,3    **~-~->**  (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State
674 + AT+ SMOD =2,3    **~-~->**  (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State。
716 716  
717 717  
718 718  * (% style="color:blue" %)**Downlink Payload (prefix 0xA5):**
... ... @@ -930,6 +930,7 @@
930 930  |(% style="width:118px" %)A8|(% style="width:67px" %)Yellow|(% style="width:123px" %)MTMS/GPIO14
931 931  |(% style="width:118px" %)B8|(% style="width:67px" %)Grey|(% style="width:123px" %)MTDO/GPIO15
932 932  
892 +
933 933  = 8.  Order Info =
934 934  
935 935  

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0