Last modified by Xiaoling on 2025/04/14 16:33
<
From version < 59.3 >
edited by Edwin Chen
on 2022/10/08 18:10
To version < 51.22 >
edited by Xiaoling
on 2022/09/30 14:51
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Xiaoling
Content
... ... @@ -1,5 +3,3 @@
1 -== ==
2 -
3 3  (% style="text-align:center" %)
4 4  [[image:1664505654417-133.png]]
5 5  
... ... @@ -63,11 +63,13 @@
63 63  * EEPROM: 520 KB
64 64  * Clock Speed: 32Mhz
65 65  
64 +
66 66  (% style="color:blue" %)**Common DC Characteristics:**
67 67  
68 68  * Supply Voltage: 5V via USB port or Internal li-on battery
69 69  * Operating Temperature: -40 ~~ 60°C
70 70  
70 +
71 71  (% style="color:blue" %)**LoRa Spec:**
72 72  
73 73  * Frequency Range,
... ... @@ -89,10 +89,12 @@
89 89  * Packet engine up to 256 bytes with CRC.
90 90  * LoRaWAN 1.0.3 Specification
91 91  
92 +
92 92  (% style="color:blue" %)**Battery:**
93 93  
94 94  * 1000mA Li-on Battery power (for model TrackerD)
95 95  
97 +
96 96  (% style="color:blue" %)**Power Consumption**
97 97  
98 98  * Sleeping Mode: 200uA
... ... @@ -99,6 +99,8 @@
99 99  * LoRa Transmit Mode: 125mA @ 20dBm 44mA @ 14dBm
100 100  * Tracking: max: 38mA
101 101  
104 +
105 +
102 102  == 1.3  Features ==
103 103  
104 104  
... ... @@ -105,7 +105,7 @@
105 105  * LoRaWAN 1.0.3 Class A
106 106  * ESP32 PICO D4
107 107  * SX1276/78 Wireless Chip
108 -* Arduino IDE Compatible
112 +** Arduino IDE Compatible
109 109  * Open source hardware / software
110 110  * Regular/ Real-time GPS,BLE,WIFI tracking
111 111  * Built-in3 axis accelerometer (LIS3DH)
... ... @@ -117,6 +117,8 @@
117 117  * Tri-color LED, Alarm button
118 118  * Datalog
119 119  
124 +
125 +
120 120  == 1.4  Applications ==
121 121  
122 122  
... ... @@ -123,6 +123,8 @@
123 123  * Logistics and Supply Chain Management
124 124  * Human tracking
125 125  
132 +
133 +
126 126  = 2.1 Use TrackerD =
127 127  
128 128  
... ... @@ -185,15 +185,14 @@
185 185  (% style="color:blue" %)**Step 3:**(%%) TrackerD will auto join to the LoRaWAN network. After join success, TrackerD will start to upload message to IoT server.
186 186  
187 187  
188 -== 2.3 Positioning Mode(SMOD) ==
196 +(% style="color:blue" %)**Positioning Mode(SMOD):**
189 189  
190 -Users can set TrackerD to different Positioning Mode for different applications. Below mod are supported.
198 +* (% style="color:#037691" %)**GPS ONLY(Factory Settings):    **(%%)only get GPS location info.
199 +* (% style="color:#037691" %)**BLE ONLY:              **(%%)Only obtain iBeacon info via BLE. Design for Indoor tracking.
200 +* (% style="color:#037691" %)**GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.
191 191  
192 -* (% style="color:#037691" %)**GPS ONLY(Factory Settings):    **(%%)only get and uplink GPS location info.
193 -* (% style="color:#037691" %)**BLE ONLY:              **(%%)Only obtain iBeacon info via BLE and uplink. Design for Indoor tracking.
194 -* (% style="color:#037691" %)**GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.Devices will try to search BLE iBeacon first. If device can't find the iBeacon, it will use GPS for positioning.
202 +User can switch modes by [[changing SMOD>>||anchor="H3.2.7SetPositioningMode"]].
195 195  
196 -Users can switch modes by [[changing SMOD>>||anchor="H3.2.7SetPositioningMode"]].
197 197  
198 198  
199 199  == 2.3 Uplink Payload ==
... ... @@ -201,121 +201,82 @@
201 201  
202 202  === 2.3.1 Uplink FPORT~=5, Device Status ===
203 203  
204 -Uplink the device configures with FPORT=5. Once LGT92 Joined the network, it will uplink this message to the server. After first uplink, LHT52 will uplink Device Status every 12 hours.
205 205  
206 -|=(% style="width: 150px;" %)**Size (bytes)**|=(% style="width: 233px;" %)**1**|=(% style="width: 150px;" %)**2**|=(% style="width: 164px;" %)**1**|=(% style="width: 215px;" %)**1**|=(% style="width: 94px;" %)2|=(% style="width: 516px;" %)**2**|=(% style="width: 516px;" %)1
207 -|(% style="width:150px" %)**Value**|(% style="width:233px" %)Sensor Model|(% style="width:150px" %)Firmware Version|(% style="width:164px" %)Frequency Band|(% style="width:215px" %)Sub-band|(% style="width:94px" %)BAT|(% style="width:516px" %)SMOD|(% style="width:516px" %)Status
208 208  
209 -[[image:image-20221006181357-2.png]]
213 +=== 2.3.2 Uplink FPORT~= , Realtime GNSS Positioning ===
210 210  
211 -Example Payload (FPort=5):  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT52%20-%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220621105116-11.png?rev=1.1||alt="image-20220621105116-11.png"]]
212 212  
213 -**Sensor Model**: For TrackerD, this value is 0x13.
216 +The default uplink payload includes totally 11 bytes. (User can use AT+MOD=0 to enable the Temperature and humidity sensor to hum/tem info from accelerometer. When accelerometer info is enable, total payload will be 15 bytes, please note 15 bytes won't work on DR0 on US915/AU915 frequency band. )
214 214  
215 -**Firmware Version**: 0x0100, Means: v1.0.0 version.
216 216  
217 -**Frequency Band**:
218 -
219 -*0x01: EU868
220 -
221 -*0x02: US915
222 -
223 -*0x03: IN865
224 -
225 -*0x04: AU915
226 -
227 -*0x05: KZ865
228 -
229 -*0x06: RU864
230 -
231 -*0x07: AS923
232 -
233 -*0x08: AS923-1
234 -
235 -*0x09: AS923-2
236 -
237 -*0x0a: AS923-3
238 -
239 -**Sub-Band**: value 0x00 ~~ 0x08(only for CN470, AU915,US915. Others are0x00)
240 -
241 -**BAT**: shows the battery voltage for TrackerD.
242 -
243 -Ex1: 0x0B3A = 2874mV
244 -
245 -Use can also get the Device Status uplink through the downlink command:
246 -
247 -
248 -=== 2.3.2 Uplink FPORT~=2, Realtime GNSS Positioning + Temperature & Humidity ===
249 -
250 -
251 -User can use **AT+SMOD=1,0** to enable uploading on-board Temperature and humidity values, and the total payload will be 15 bytes, please note that 15 bytes won't work on DR0 on US915/AU915 frequency band.
252 -
253 -
254 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:480px" %)
255 -|=(% scope="row" style="width: 50px;" %)(((
219 +(% border="1.5" cellspacing="3" style="background-color:#ffffcc; color:green; width:520px" %)
220 +|=(% scope="row" style="width: 80px;" %)(((
256 256  **Size(bytes)**
257 -)))|(% style="width:60px" %)4|(% style="width:70px" %)4|(% style="width:80px" %)2|(% style="width:73px" %)1|(% style="width:40px" %)(((
258 -2
259 -)))|(% style="width:87px" %)(((
260 -2
222 +)))|(% style="width:60px" %)4|(% style="width:70px" %)4|(% style="width:80px" %)2|(% style="width:50px" %)1|(% style="width:80px" %)(((
223 +2(optional )
224 +)))|(% style="width:80px" %)(((
225 +2(optional)
261 261  )))
262 262  |=(% style="width: 69px;" %)**Value**|(% style="width:76px" %)[[Latitude>>||anchor="HLocationinfo:"]]|(% style="width:87px" %)[[Longitude>>||anchor="HLocationinfo:"]]|(% style="width:76px" %)(((
263 263  [[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
264 -)))|(% style="width:73px" %)[[FLAG>>||anchor="HFLAG:"]]|(% style="width:40px" %)[[Hum>>||anchor="HHum:"]]|(% style="width:87px" %)[[Tem>>||anchor="HTem:"]]
229 +)))|(% style="width:52px" %)[[FLAG>>||anchor="HFLAG:"]]|(% style="width:88px" %)[[Hum>>||anchor="HHum:"]]|(% style="width:83px" %)[[Tem>>||anchor="HTem:"]]
265 265  
266 266  [[image:1664501958445-288.png]]
267 267  
268 268  
269 -==== (% style="color:blue" %)**Alarm & BAT:**(%%) ====
234 +==== (% style="color:blue" %)Alarm & BAT:(%%) ====
270 270  
271 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:250px" %)
272 -|=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)1 bit|(% style="width:80px" %)1bit|(% style="width:50px" %)14bits
236 +(% border="1.5" cellspacing="3" style="background-color:#ffffcc; color:green; width:329px" %)
237 +|=(% scope="row" style="width: 72px;" %)**Size(bit)**|(% style="width:67px" %)1 bit|(% style="width:118px" %)1bit|(% style="width:63px" %)14 bits
273 273  |=(% style="width: 72px;" %)**Value**|(% style="width:67px" %)reserve|(% style="width:118px" %)Alarm Indicate|(% style="width:63px" %)[[BAT>>||anchor="HBAT:"]] 
274 274  
275 -==== (% style="color:blue" %)**FLAG:**(%%) ====
240 +==== (% style="color:blue" %)FLAG:(%%) ====
276 276  
277 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:250px" %)
278 -|=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)2bits|(% style="width:50px" %)1bit
279 -|=(% style="width: 79px;" %)**Value**|(% style="width:55px" %)[[MOD>>||anchor="H3.2.7SetPositioningMode"]]|(% style="width:47px" %)[[LON>>||anchor="HLON:"]]
242 +(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:332px" %)
243 +|=(% scope="row" style="width: 79px;" %)**Size(bit)**|(% style="width:55px" %)2 bits|(% style="width:47px" %)1bit|(% style="width:140px" %)5 bits
244 +|=(% style="width: 79px;" %)**Value**|(% style="width:55px" %)[[MOD>>||anchor="H2.3.4BLEpositioningPayload28Fport229"]]|(% style="width:47px" %)[[LON>>||anchor="HLON:"]]|(% style="width:140px" %)Firmware version 
280 280  
281 281  **Example:** Payload: 0x02863D68 FAC29BAF 4B45 60 0202 011A 
282 282  
283 283  
284 -==== (% style="color:blue" %)**Location info:**(%%) ====
249 +==== (% style="color:blue" %)Location info:(%%) ====
285 285  
286 286  * Latitude: 02863D68  ⇒  //if (0x//02863D68//& 0x80000000 = 0 )~://  //value = 02863D68 /1000000 = 42.351976//
287 287  * Longitude: FAC29BAF  ⇒ //if (0x//FAC29BAF// & 0x80000000 = 1 )~://  //value = (0x//FAC29BAF// – 0x 100000000)/1000000 =//-87.9094//57//
288 288  
289 -
290 290  (% style="color:red" %)**Important note:**
291 291  
292 292  1.  When power is low (<2.84v), GPS won't be able to get location info and GPS feature will be disabled and the location field will be filled with 0x0FFFFFFF, 0x0FFFFFFF.
293 293  
294 -2.  In this mode, the total payload will be 15 bytes, while US915/AU915 DR0 accepts only 11 bytes payload. In this case, the payload on server will be ignore and shows as below:
258 +2.  In firmware version v1.5, Roll & Pitch is disabled by default.
295 295  
260 +3.  When enable 9-axis motion sensor, the total payload will be 15 bytes, while US915/AU915 DR0 accept only 11 bytes payload. In this case, the payload on server will be ignore and shows as below:
296 296  
262 +
297 297  [[image:1664502116362-706.png]]
298 298  
299 299  
300 -3.  While GPS can't get location info after timeout(FTIME Parameter), the latitude and longitude will be filled with all 0x00:
301 301  
267 +4.  While GPS can't get location info after timeout(FTIME Parameter), the latitude and longitude will be filled with all 0x00:
268 +
302 302  [[image:1664502166010-515.png]]
303 303  
304 304  
305 305  
306 -==== (% style="color:blue" %)**Alarm:**(%%) ====
273 +==== (% style="color:blue" %)Alarm:(%%) ====
307 307  
275 +
308 308  Example:  0x4B & 0x40 >> 6 = 0x01
309 309  
310 310  
311 -==== (% style="color:blue" %)**BAT:**(%%) ====
279 +==== (% style="color:blue" %)BAT:(%%) ====
312 312  
281 +
313 313  Example:  0x0CDD & 0x3FFF ⇒ 3293 (mV).
314 314  
315 -(((
316 -The battery info shows the battery voltage, User can use the below mapping to indicate the battery in percentage: \
317 -)))
284 +The battery info shows the current voltage, for (% style="color:blue" %)**TrackerD**(%%) version which powered by li-on battery. User can use below mapping to indicate the battery in percentage: \
318 318  
286 +
319 319  * > 4.0v :  80% ~~ 100%
320 320  * 3.85v ~~3.99v:  60% ~~ 80%
321 321  * 3.70v ~~ 3.84v:  40% ~~ 60%
... ... @@ -322,68 +322,46 @@
322 322  * 3.40v ~~ 3.69v:  20% ~~ 40%
323 323  * < 3.39v:  0~~20%
324 324  
293 +==== (% style="color:blue" %)LON:(%%) ====
325 325  
326 -==== (% style="color:blue" %)**LON:**(%%) ====
327 -
295 +
328 328  Enable/Disable LED activity for uplink
329 329  
330 -(((
331 331  0x00:  Disable LED indicator.
332 -)))
333 333  
334 -(((
335 335  0x01:  Enable LED indicator (Default Value)
336 -)))
337 337  
338 338  
339 -==== (% style="color:blue" %)**Hum:**(%%) ====
303 +==== (% style="color:blue" %)Hum:(%%) ====
340 340  
341 341  0202 = //if (0x0202 & 0x8000 = 0 ):  value =// 0x0202 / 100 = +514 ⇒ 51.4 degree
342 342  
343 343  
344 -==== (% style="color:blue" %)**Tem:**(%%) ====
308 +==== (% style="color:blue" %)Tem:(%%) ====
345 345  
346 346  011A =if (0x011A & 0x8000 = 1 ):  value =( 0x011A - 0x10000)/10(dec) ⇒ -//28.2 degree//
347 347  
348 348  
349 -=== 2.3.3  Uplink FPORT~=3, Realtime GNSS Positioning (Default Mode) ===
350 350  
351 -The default uplink payload includes totally 11 bytes. The payload is the first 11 bytes of Uplink FPORT=2, real-time GNSS positioning, (remove the temp and humidity)
352 352  
315 +=== 2.3.3 Uplink FPORT~= , History GNSS Positioning ===
353 353  
354 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:480px" %)
355 -|=(% scope="row" style="width: 50px;" %)(((
356 -**Size(bytes)**
357 -)))|(% style="width:60px" %)4|(% style="width:70px" %)4|(% style="width:80px" %)2|(% style="width:73px" %)1
358 -|=(% style="width: 69px;" %)**Value**|(% style="width:76px" %)[[Latitude>>||anchor="HLocationinfo:"]]|(% style="width:87px" %)[[Longitude>>||anchor="HLocationinfo:"]]|(% style="width:76px" %)(((
359 -[[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
360 -)))|(% style="width:73px" %)[[FLAG>>||anchor="HFLAG:"]]
361 361  
362 362  
319 +=== 2.3.4 BLE positioning Payload(Fport2) ===
363 363  
364 -=== 2.3.4  Uplink FPORT~=4, History GNSS Positioning ===
365 365  
366 -Set [[PNACKMD=1>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H4.13AutoSendNone-ACKmessages]], and TrackerD will wait for ACK for every uplink, when there is no LoRaWAN network, TrackerD will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
322 +Different MODE has different payload:
367 367  
368 -**Note for this mode:**
324 +**MODE=2**
369 369  
370 -* a) TrackerD will do an ACK check for data records sending to make sure every data arrive server.
371 -* b) TrackerD will send data in **CONFIRMED Mode** when PNACKMD=1, but TrackerD won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink, if TrackerD gets an ACK, TrackerD will consider there is a network connection and resend all NONE-ACK Messages.
326 +(% border="2" style="background-color:#ffffcc; color:green; width:491px" %)
327 +|(% style="width:70px" %)(((
328 +**Size**
372 372  
373 -The payload is 15 bytes, as below.
374 -
375 -
376 -
377 -=== 2.3.5  BLE positioning Payload(Fport2) ===
378 -
379 -
380 -Different MODE has different payload:  (% style="color:blue" %)**MODE=2**
381 -
382 -(% border="1.5" cellspacing="3" style="background-color:#ffffcc; color:green; width:450px" %)
383 -|=(% scope="row" style="width: 60px;" %)(((
384 -**Size(bytes)**
385 -)))|(% style="width:30px" %)16|(% style="width:50px" %)4|(% style="width:50px" %)4|(% style="width:120px" %)2|(% style="width:50px" %)4|(% style="width:50px" %)2|(% style="width:30px" %)1
386 -|=(% style="width: 50px;" %)**Value**|(% style="width:44px" %)[[UUID>>||anchor="HLocationinfo:"]]|(% style="width:61px" %)(((
330 +**(bytes)**
331 +)))|(% style="width:44px" %)16|(% style="width:61px" %)4|(% style="width:63px" %)4|(% style="width:71px" %)2|(% style="width:50px" %)4|(% style="width:47px" %)2|(% style="width:15px" %)1
332 +|(% style="width:70px" %)**Value**|(% style="width:44px" %)[[UUID>>||anchor="HLocationinfo:"]]|(% style="width:61px" %)(((
387 387  iBeacon MAJOR
388 388  )))|(% style="width:63px" %)(((
389 389  iBeacon MINOR
... ... @@ -429,13 +429,9 @@
429 429  == 2.4 Integrate with Datacake ==
430 430  
431 431  
432 -(((
433 433  After TrackerD sends data to LoRaWAN server such as TTN, use can pass the data to Datacake and plot out, currently only support GPS plot.
434 -)))
435 435  
436 -(((
437 437  Instruction is here:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20Data%20Cake/#H7.Example~~-~~-AddTrackerDGPSTrackingInDataCake>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20Data%20Cake/#H7.Example--AddTrackerDGPSTrackingInDataCake]]
438 -)))
439 439  
440 440  
441 441  [[image:1664502695771-538.png]]
... ... @@ -445,13 +445,9 @@
445 445  == 2.5 Integrate with Tago ==
446 446  
447 447  
448 -(((
449 449  After TrackerD sends data to LoRaWAN server such as TTN, use can pass the data to Datacake and plot out, currently only support GPS plot.
450 -)))
451 451  
452 -(((
453 453  Instruction is here: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Tago.IO/#H3.A0Example-CreateTrackerD2FLGT92positioningwidget>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Tago.IO/#H3.A0Example-CreateTrackerD2FLGT92positioningwidget]]
454 -)))
455 455  
456 456  
457 457  [[image:1664502715371-321.png]]
... ... @@ -458,46 +458,33 @@
458 458  
459 459  
460 460  
461 -== 2.6 Datalog Feature ==
462 -
463 -
464 464  == 2.6 Alarm Mode ==
465 465  
466 466  
467 -(((
468 468  User can push the (% style="color:red" %)**RED button**(%%) by more than 5 seconds to enter Alarm Mode.
469 -)))
470 470  
471 471  
472 -(((
473 473  Once enter Alarm mode, the (% style="color:green" %)**GREEN LED**(%%) will flash 3 times, the buzzer will alarm for 5 seconds, then TrackerD will immediately send a packet without location info and then send a data packet with GPS positioning information. After that, the device will send 60 packets at 1-minute intervals. The Alarm flag in the payload will be set for the next 60 packets unless exit alert mode.
474 -)))
475 475  
476 476  
477 -(((
478 478  Two ways to exit alarm mode:
479 -)))
480 480  
481 481  * Server send a downlink command to exit.
482 482  * User fast press the RED button 10 times.
483 483  
484 -(((
485 485  When exit alarm mode, (% style="color:red" %)**RED LED**(%%) will light up for 5 seconds, indicating that the alarm mode is exited. And the alert flag will be set to false.
486 -)))
487 487  
488 488  
489 489  
490 -== 2.7 Transport Mode ==
417 +== 2.7 Sports Mode ~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-- ==
491 491  
492 492  
493 -In Transport Mode, TrackerD will check if there is motion. If there is no motion, device will send uplinks every 20 minutes. If there is motion, device will send uplink every 5 minutes.
494 494  
495 -
496 496  == 2.8 LED Status ==
497 497  
498 498  
499 -(% border="1.5" style="background-color:#ffffcc; color:green; width:500px" %)
500 -|=(% style="width: 150px;" %)**Event**|=(% style="width: 200px;" %)**Action**|=(% style="width: 150px;" %)**AT+LON to control on/off**
424 +(% border="2" style="background-color:#ffffcc; color:green; width:636px" %)
425 +|(% style="width:157px" %)**Event**|(% style="width:271px" %)**Action**|(% style="width:202px" %)**AT+LON to control on/off**
501 501  |(% style="width:157px" %)**Power On**|(% style="width:271px" %)(% style="color:blue" %)**BLUE, **(% style="color:red" %)**RED , **(% style="color:green" %)**Green** flash once|(% style="width:202px" %)N/A
502 502  |(% style="width:157px" %)**Join request**|(% style="width:271px" %)(% style="color:green" %)**Green** (%%)led fast blink once (200ms)|(% style="width:202px" %)Yes
503 503  |(% style="width:157px" %)**Join Success**|(% style="width:271px" %)(% style="color:green" %)**Green**(%%) led on 5 second|(% style="width:202px" %)N/A
... ... @@ -513,7 +513,7 @@
513 513  == 2.9 Button Function ==
514 514  
515 515  
516 -(% style="color:blue" %)**RESET button:**
441 +(% style="color:green" %)**RESET button:**
517 517  
518 518  [[image:1664502835802-546.png]]
519 519  
... ... @@ -525,12 +525,13 @@
525 525  [[image:1664502854406-763.png]]
526 526  
527 527  
528 -(% border="1.5" style="background-color:#ffffcc; color:green; width:520px" %)
529 -|=(% style="width: 100px;" %)**Function**|=(% style="width: 210px;" %)**Action**|=(% style="width: 210px;" %)**Description**
453 +(% border="2" style="background-color:#ffffcc; color:green; width:627px" %)
454 +|(% style="width:135px" %)**Function**|(% style="width:220px" %)**Action**|(% style="width:265px" %)**Description**
530 530  |(% style="width:135px" %)Send Alarm|(% style="width:220px" %)Keep Pressing (% style="color:red" %)**RED**(%%) button for more than 5 seconds|(% style="width:265px" %)Enter Alarm Mode.  See [[Alarm Mode>>||anchor="H2.6AlarmMode"]]
531 531  |(% style="width:135px" %)Exit Alarm Mode|(% style="width:220px" %)Fast press the (% style="color:red" %)**RED** (%%)button 10 times|(% style="width:265px" %)Exit Alarm Mode
532 532  |(% style="width:135px" %)Enter Deep Sleep Mode|(% style="width:220px" %)Press and hold the button for 10 seconds, then quickly press the device 3 times to enter deep sleep|(% style="width:265px" %)This is the mode ship out from factory. CPU will be complete in sleep mode and no LoRa activity, only use before deploy.
533 533  
459 +
534 534  == 2.10 USB Port Function ==
535 535  
536 536  
... ... @@ -541,6 +541,7 @@
541 541  * [[Configure Device>>||anchor="H3.ConfigureTrackerDviaATcommandorLoRaWANdownlink"]]
542 542  * [[Upgrade Firmware>>||anchor="H5.UploadFirmware"]]
543 543  
470 +
544 544  = 3. Configure TrackerD via AT command or LoRaWAN downlink =
545 545  
546 546  
... ... @@ -613,16 +613,16 @@
613 613  
614 614  
615 615  
616 -=== 3.2.3 Set Transport Mode Packet transmission interval ===
543 +=== 3.2.3 Set Sports Mode Packet transmission interval ===
617 617  
618 618  
619 -Set Transport Mode packet transmit interval
546 +Set sports packet transmit interval
620 620  
621 621  * (% style="color:blue" %)**AT Command:**
622 622  
623 623  (% style="color:#037691" %)**AT+MTDC=xx. **
624 624  
625 -Example:  AT+MTDC=300000  **~-~->    ** Set Transport Mode Packet Interval to 300 seconds. TrackerD will send every 300 seconds in Transport mode, Default Value: 300000
552 + Example:  AT+MTDC=300000  **~-~->    ** Set Sports Mode Packet Interval to 300 seconds. TrackerD will send every 300 seconds in Sports mode, Default Value: 300000
626 626  
627 627  
628 628  * (% style="color:blue" %)**Downlink Payload (prefix 0x03):**
... ... @@ -653,7 +653,7 @@
653 653  
654 654  (% style="color:#037691" %)**AT+LON=xx.  (Disable (0), Enable (1), default:1)**
655 655  
656 -Example: AT+LON=0  **~-~-> ** Disable LED for position, downlink and uplink.
583 + Example: AT+LON=0  **~-~-> ** Disable LED for position, downlink and uplink.
657 657  
658 658  
659 659  * (% style="color:blue" %)**Downlink Payload (prefix 0xAE):**
... ... @@ -662,16 +662,16 @@
662 662  
663 663  
664 664  
665 -=== 3.2.6 Disable/Enable Transport Mode ===
592 +=== 3.2.6 Disable/Enable movement detect (Debug Only) ===
666 666  
667 667  
668 -Users can use this feature to enable/disable Transport Mode.
595 +User can use this feature to check and set thread hole of movement detect
669 669  
670 670  * (% style="color:blue" %)**AT Command:**
671 671  
672 672  (% style="color:#037691" %)**AT+INTWK=xx.  (Disable (0), Enable (1), default:0)**
673 673  
674 -Example:  AT+ INTWK =1  **~-~->   ** Enable Transport Mode.
601 + Example:  AT+ INTWK =1  **~-~->   ** Enable detect movement.
675 675  
676 676  
677 677  * (% style="color:blue" %)**Downlink Payload (prefix 0xAF):**
... ... @@ -683,9 +683,18 @@
683 683  === 3.2.7 Set Positioning Mode ===
684 684  
685 685  
686 -SMOD define the how TrackerD scan and uplink data:
613 +SMOD define the how TrackerD scan and uplink date.
687 687  
615 +GPS室外定位模式：  设备默认模式，设备入网后会发送device当前模式下的信息，随后立即定位发送数据包（默认是3分钟定位，超过将发送无效数据），如果出现意外情况下，快速按键3下，将会发出报警消息（默认每分钟发送一次）。GPS还有一种logdata模式，在断网的情况下将数据存储下来，等到有网的时候，一次将数据以每10秒上报。
688 688  
617 +BLE室内定位模式：  设备入网后会发送device当前模式下的信息，随后立即定位发送数据包（默认是5秒，超过将发送无效数据），如果出现意外情况下，快速按键3下，将会发出报警消息（默认每3分钟发送一次）。
618 +
619 +GPS和BLE混动模式：设备入网后会发送device当前模式下的信息，随后立即判断是否在室内，如果是就进行BLE定位，不是就GPS定位。如果出现意外情况下，快速按键3下，将会发出报警消息（默认每分钟发送一次）。
620 +
621 +运动模式：  设备入网后会发送device当前模式下的信息，随后发送GPS定位数据，设备判断是否在运动，没有运动传感器没有检测到动作，立即进入静止状态（默认20分钟），如果产生运动，将每5分钟发送一次数据，再第五分钟后检测设备有误运动，无将切换到静止状态，有立即发送数据。
622 +
623 +
624 +
689 689  * (% style="color:blue" %)**AT Command:**
690 690  
691 691  (% style="color:#037691" %)**AT+SMOD=xx. **
... ... @@ -800,7 +800,7 @@
800 800  After installation of the driver and plug in TrackerD, user should be able to see com port in PC's device manager.
801 801  
802 802  
803 -(% style="color:blue" %)**Step3:  **(%%)Download and Install Flash Tool:  [[https:~~/~~/www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools>>url:https://www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools]]
739 +(% style="color:blue" %)**Step3：**(%%) Download and Install Flash Tool:  [[https:~~/~~/www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools>>url:https://www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools]]
804 804  
805 805  
806 806  (% style="color:blue" %)**Step4:** (%%) Run Flash Download Tool and configure chip type to ESP32
... ... @@ -843,7 +843,7 @@
843 843  === 6.1.1 Set up ARDUINO compile environment ===
844 844  
845 845  
846 -* **Download the latest Arduino software (IDE) from the Arduino official website:  [[https:~~/~~/www.arduino.cc/en/Main/Software>>url:https://www.arduino.cc/en/Main/Software]]**
782 +* Download the latest Arduino software (IDE) from the Arduino official website:  [[https:~~/~~/www.arduino.cc/en/Main/Software>>url:https://www.arduino.cc/en/Main/Software]]
847 847  
848 848  Install IDE on PC, open and click (% style="color:#037691" %)**File ~-~-> Preference**,(%%) add the following URL:  [[https:~~/~~/dl.espressif.com/dl/package_esp32_index.json>>url:https://links.jianshu.com/go?to=https%3A%2F%2Fdl.espressif.com%2Fdl%2Fpackage_esp32_index.json]]
849 849  
... ... @@ -851,13 +851,13 @@
851 851  [[image:1664503635019-941.png]]
852 852  
853 853  
854 -* (% style="color:#037691" %)**Go to tools ~-~-> Boards ~-~-> Boards Manager**,(%%) **find the esp32 information and install it.**
790 +* (% style="color:#037691" %)**Go to tools ~-~-> Boards ~-~-> Boards Manager**,(%%) find the esp32 information and install it.
855 855  
856 856  [[image:1664503715811-892.png]]
857 857  
858 858  
859 859  
860 -* **Download the latest TrackerD from the dragino github: [[https:~~/~~/github.com/dragino/TrackerD>>url:https://github.com/dragino/TrackerD]]**
796 +* Download the latest TrackerD from the dragino github: [[https:~~/~~/github.com/dragino/TrackerD>>url:https://github.com/dragino/TrackerD]]
861 861  
862 862  Put the Library in the TrackerD directory into the libraries file in the Arduino directory:
863 863  
... ... @@ -904,8 +904,8 @@
904 904  
905 905  
906 906  
907 -(% border="1.5" cellspacing="3" style="background-color:#ffffcc; color:green; width:314px" %)
908 -|=(% style="width: 118px;" %)**Pin**|=(% style="width: 67px;" %)**Color**|=(% style="width: 123px;" %)**USB Pin**
843 +(% border="2" style="background-color:#ffffcc; color:green; width:314px" %)
844 +|(% style="width:118px" %)**Pin**|(% style="width:67px" %)**Color**|(% style="width:123px" %)**USB Pin**
909 909  |(% style="width:118px" %)A4,B4,A9,B9|(% style="width:67px" %)Red|(% style="width:123px" %)VCC
910 910  |(% style="width:118px" %)A7,B7|(% style="width:67px" %)White|(% style="width:123px" %)D- (N/A)
911 911  |(% style="width:118px" %)A6,B6|(% style="width:67px" %)Green|(% style="width:123px" %)D+(N/A)
... ... @@ -933,12 +933,12 @@
933 933  = 9.  Packing Info =
934 934  
935 935  
936 -(% style="color:#037691" %)**Package Includes**:
872 +**Package Includes**:
937 937  
938 938  * TrackerD LoRaWAN GPS/BLE Tracker x 1
939 939  * USB recharge & program cable x 1
940 940  
941 -(% style="color:#037691" %)**Dimensions and Weight**:
877 +**Dimensions and Weight**:
942 942  
943 943  * Device Size: 85 x 48 x 15 cm
944 944  * Weight: 50g
... ... @@ -947,7 +947,7 @@
947 947  
948 948  
949 949  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
950 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]].
886 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]]
951 951  
952 952  = 11.  Reference =
953 953  
... ... @@ -955,5 +955,3 @@
955 955  * [[**Firmware in Bin format**>>https://www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0]]
956 956  * **[[Source Code>>https://github.com/dragino/TrackerD]] **
957 957  * [[**Hardware Source**>>https://www.dropbox.com/sh/orwoy6cecb89m4e/AAD37sRuUrvKsHgAJxuVTkB5a?dl=0]]
958 -
959 -
image-20221006181316-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -17.7 KB
Content
image-20221006181357-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -88.0 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0