Last modified by Xiaoling on 2025/04/14 16:33
<
From version < 51.32 >
edited by Xiaoling
on 2022/09/30 16:48
To version < 51.12 >
edited by Xiaoling
on 2022/09/30 11:57
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -25,14 +25,10 @@
25 25  (((
26 26  In TrackerD, there are various sensors such as GPS, WiFi, BLE, Temperature, Humidity, Motion Detection, and Buzzer. User can use TrackerD for different tracking scenario.
27 27  
28 -(((
29 29  TrackerD is program friendly. Developers can use Arduino IDE to customize the software of TrackerD to fit their IoT solution.
30 -)))
31 31  
32 -(((
33 33  The LoRa wireless technology used in TrackerD allows the user to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional tracking services.
34 34  )))
35 -)))
36 36  
37 37  (((
38 38  TrackerD is equipped with a (% style="color:blue" %)**1000mAh Li-on rechargeable battery**(%%). Each TrackerD has a worldwide unique OTAA keys to join the LoRaWAN network.
... ... @@ -61,13 +61,11 @@
61 61  * EEPROM: 520 KB
62 62  * Clock Speed: 32Mhz
63 63  
64 -
65 65  (% style="color:blue" %)**Common DC Characteristics:**
66 66  
67 67  * Supply Voltage: 5V via USB port or Internal li-on battery
68 68  * Operating Temperature: -40 ~~ 60°C
69 69  
70 -
71 71  (% style="color:blue" %)**LoRa Spec:**
72 72  
73 73  * Frequency Range,
... ... @@ -89,12 +89,10 @@
89 89  * Packet engine up to 256 bytes with CRC.
90 90  * LoRaWAN 1.0.3 Specification
91 91  
92 -
93 93  (% style="color:blue" %)**Battery:**
94 94  
95 95  * 1000mA Li-on Battery power (for model TrackerD)
96 96  
97 -
98 98  (% style="color:blue" %)**Power Consumption**
99 99  
100 100  * Sleeping Mode: 200uA
... ... @@ -101,8 +101,6 @@
101 101  * LoRa Transmit Mode: 125mA @ 20dBm 44mA @ 14dBm
102 102  * Tracking: max: 38mA
103 103  
104 -
105 -
106 106  == 1.3  Features ==
107 107  
108 108  
... ... @@ -109,7 +109,7 @@
109 109  * LoRaWAN 1.0.3 Class A
110 110  * ESP32 PICO D4
111 111  * SX1276/78 Wireless Chip
112 -* Arduino IDE Compatible
102 +* Arduino IDE Compatible
113 113  * Open source hardware / software
114 114  * Regular/ Real-time GPS,BLE,WIFI tracking
115 115  * Built-in3 axis accelerometer (LIS3DH)
... ... @@ -121,8 +121,6 @@
121 121  * Tri-color LED, Alarm button
122 122  * Datalog
123 123  
124 -
125 -
126 126  == 1.4  Applications ==
127 127  
128 128  
... ... @@ -129,8 +129,6 @@
129 129  * Logistics and Supply Chain Management
130 130  * Human tracking
131 131  
132 -
133 -
134 134  = 2.1 Use TrackerD =
135 135  
136 136  
... ... @@ -216,43 +216,47 @@
216 216  The default uplink payload includes totally 11 bytes. (User can use AT+MOD=0 to enable the Temperature and humidity sensor to hum/tem info from accelerometer. When accelerometer info is enable, total payload will be 15 bytes, please note 15 bytes won't work on DR0 on US915/AU915 frequency band. )
217 217  
218 218  
219 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:480px" %)
220 -|=(% scope="row" style="width: 50px;" %)(((
221 -**Size(bytes)**
222 -)))|(% style="width:60px" %)4|(% style="width:70px" %)4|(% style="width:80px" %)2|(% style="width:50px" %)1|(% style="width:88px" %)(((
223 -2(optional)
224 -)))|(% style="width:87px" %)(((
225 -2(optional)
205 +(% border="2" style="background-color:#ffffcc; color:green; width:537px" %)
206 +|(% style="width:69px" %)(((
207 +**Size**
208 +
209 +**(bytes)**
210 +)))|(% style="width:76px" %)4|(% style="width:87px" %)4|(% style="width:76px" %)2|(% style="width:52px" %)1|(% style="width:88px" %)(((
211 +2
212 +
213 +(optional )
214 +)))|(% style="width:83px" %)(((
215 +2
216 +
217 +(optional)
226 226  )))
227 -|=(% style="width: 69px;" %)**Value**|(% style="width:76px" %)[[Latitude>>||anchor="HLocationinfo:"]]|(% style="width:87px" %)[[Longitude>>||anchor="HLocationinfo:"]]|(% style="width:76px" %)(((
219 +|(% style="width:69px" %)**Value**|(% style="width:76px" %)[[Latitude>>||anchor="HLocationinfo:"]]|(% style="width:87px" %)[[Longitude>>||anchor="HLocationinfo:"]]|(% style="width:76px" %)(((
228 228  [[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
229 -)))|(% style="width:52px" %)[[FLAG>>||anchor="HFLAG:"]]|(% style="width:88px" %)[[Hum>>||anchor="HHum:"]]|(% style="width:87px" %)[[Tem>>||anchor="HTem:"]]
221 +)))|(% style="width:52px" %)[[FLAG>>||anchor="HFLAG:"]]|(% style="width:88px" %)[[Hum>>||anchor="HHum:"]]|(% style="width:83px" %)[[Tem>>||anchor="HTem:"]]
230 230  
231 231  [[image:1664501958445-288.png]]
232 232  
233 233  
234 -==== (% style="color:blue" %)**Alarm & BAT:**(%%) ====
226 +==== (% style="color:blue" %)Alarm & BAT:(%%) ====
235 235  
236 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:250px" %)
237 -|=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)1 bit|(% style="width:80px" %)1bit|(% style="width:50px" %)14bits
238 -|=(% style="width: 72px;" %)**Value**|(% style="width:67px" %)reserve|(% style="width:118px" %)Alarm Indicate|(% style="width:63px" %)[[BAT>>||anchor="HBAT:"]] 
228 +(% border="2" style="background-color:#ffffcc; color:green; width:329px" %)
229 +|(% style="width:72px" %)**Size(bit)**|(% style="width:67px" %)1 bit|(% style="width:118px" %)1bit|(% style="width:63px" %)14 bits
230 +|(% style="width:72px" %)**Value**|(% style="width:67px" %)reserve|(% style="width:118px" %)Alarm Indicate|(% style="width:63px" %)[[BAT>>||anchor="HBAT:"]] 
239 239  
240 -==== (% style="color:blue" %)**FLAG:**(%%) ====
232 +==== (% style="color:blue" %)FLAG:(%%) ====
241 241  
242 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:250px" %)
243 -|=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)2bits|(% style="width:50px" %)1bit|(% style="width:100px" %)5 bits
244 -|=(% style="width: 79px;" %)**Value**|(% style="width:55px" %)[[MOD>>||anchor="H3.2.7SetPositioningMode"]]|(% style="width:47px" %)[[LON>>||anchor="HLON:"]]|(% style="width:140px" %)Firmware version 
234 +(% border="2" style="background-color:#ffffcc; color:green; width:332px" %)
235 +|(% style="width:79px" %)**Size(bit)**|(% style="width:55px" %)2 bits|(% style="width:47px" %)1bit|(% style="width:140px" %)5 bits
236 +|(% style="width:79px" %)**Value**|(% style="width:55px" %)[[MOD>>||anchor="H2.3.4BLEpositioningPayload28Fport229"]]|(% style="width:47px" %)[[LON>>||anchor="HLON:"]]|(% style="width:140px" %)Firmware version 
245 245  
246 246  **Example:** Payload: 0x02863D68 FAC29BAF 4B45 60 0202 011A 
247 247  
248 248  
249 -==== (% style="color:blue" %)**Location info:**(%%) ====
241 +==== (% style="color:blue" %)Location info:(%%) ====
250 250  
251 251  * Latitude: 02863D68  ⇒  //if (0x//02863D68//& 0x80000000 = 0 )~://  //value = 02863D68 /1000000 = 42.351976//
252 252  * Longitude: FAC29BAF  ⇒ //if (0x//FAC29BAF// & 0x80000000 = 1 )~://  //value = (0x//FAC29BAF// – 0x 100000000)/1000000 =//-87.9094//57//
253 253  
254 -
255 -
256 256  (% style="color:red" %)**Important note:**
257 257  
258 258  1.  When power is low (<2.84v), GPS won't be able to get location info and GPS feature will be disabled and the location field will be filled with 0x0FFFFFFF, 0x0FFFFFFF.
... ... @@ -272,19 +272,20 @@
272 272  
273 273  
274 274  
275 -==== (% style="color:blue" %)**Alarm:**(%%) ====
265 +==== (% style="color:blue" %)Alarm:(%%) ====
276 276  
267 +
277 277  Example:  0x4B & 0x40 >> 6 = 0x01
278 278  
279 279  
280 -==== (% style="color:blue" %)**BAT:**(%%) ====
271 +==== (% style="color:blue" %)BAT:(%%) ====
281 281  
273 +
282 282  Example:  0x0CDD & 0x3FFF ⇒ 3293 (mV).
283 283  
284 -(((
285 285  The battery info shows the current voltage, for (% style="color:blue" %)**TrackerD**(%%) version which powered by li-on battery. User can use below mapping to indicate the battery in percentage: \
286 -)))
287 287  
278 +
288 288  * > 4.0v :  80% ~~ 100%
289 289  * 3.85v ~~3.99v:  60% ~~ 80%
290 290  * 3.70v ~~ 3.84v:  40% ~~ 60%
... ... @@ -292,32 +292,28 @@
292 292  * < 3.39v:  0~~20%
293 293  
294 294  
286 +==== (% style="color:blue" %)LON:(%%) ====
295 295  
296 -==== (% style="color:blue" %)**LON:**(%%) ====
297 -
298 -
288 +
299 299  Enable/Disable LED activity for uplink
300 300  
301 -(((
302 302  0x00:  Disable LED indicator.
303 -)))
304 304  
305 -(((
306 306  0x01:  Enable LED indicator (Default Value)
307 -)))
308 308  
309 309  
310 -==== (% style="color:blue" %)**Hum:**(%%) ====
296 +==== (% style="color:blue" %)Hum:(%%) ====
311 311  
312 312  0202 = //if (0x0202 & 0x8000 = 0 ):  value =// 0x0202 / 100 = +514 ⇒ 51.4 degree
313 313  
314 314  
315 -==== (% style="color:blue" %)**Tem:**(%%) ====
301 +==== (% style="color:blue" %)Tem:(%%) ====
316 316  
317 317  011A =if (0x011A & 0x8000 = 1 ):  value =( 0x011A - 0x10000)/10(dec) ⇒ -//28.2 degree//
318 318  
319 319  
320 320  
307 +
321 321  === 2.3.3 Uplink FPORT~= , History GNSS Positioning ===
322 322  
323 323  
... ... @@ -325,13 +325,17 @@
325 325  === 2.3.4 BLE positioning Payload(Fport2) ===
326 326  
327 327  
328 -Different MODE has different payload:  (% style="color:blue" %)**MODE=2**
315 +Different MODE has different payload:
329 329  
330 -(% border="1.5" cellspacing="3" style="background-color:#ffffcc; color:green; width:450px" %)
331 -|=(% scope="row" style="width: 60px;" %)(((
332 -**Size(bytes)**
333 -)))|(% style="width:30px" %)16|(% style="width:50px" %)4|(% style="width:50px" %)4|(% style="width:120px" %)2|(% style="width:50px" %)4|(% style="width:50px" %)2|(% style="width:30px" %)1
334 -|=(% style="width: 50px;" %)**Value**|(% style="width:44px" %)[[UUID>>||anchor="HLocationinfo:"]]|(% style="width:61px" %)(((
317 +**MODE=2**
318 +
319 +(% border="2" style="background-color:#ffffcc; color:green; width:491px" %)
320 +|(% style="width:70px" %)(((
321 +**Size**
322 +
323 +**(bytes)**
324 +)))|(% style="width:44px" %)16|(% style="width:61px" %)4|(% style="width:63px" %)4|(% style="width:71px" %)2|(% style="width:50px" %)4|(% style="width:47px" %)2|(% style="width:15px" %)1
325 +|(% style="width:70px" %)**Value**|(% style="width:44px" %)[[UUID>>||anchor="HLocationinfo:"]]|(% style="width:61px" %)(((
335 335  iBeacon MAJOR
336 336  )))|(% style="width:63px" %)(((
337 337  iBeacon MINOR
... ... @@ -343,6 +343,7 @@
343 343  [[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
344 344  )))|(% style="width:15px" %)[[FLAG>>||anchor="HFLAG:"]]
345 345  
337 +
346 346  [[image:1664502425687-834.png]]
347 347  
348 348  
... ... @@ -379,13 +379,9 @@
379 379  == 2.4 Integrate with Datacake ==
380 380  
381 381  
382 -(((
383 383  After TrackerD sends data to LoRaWAN server such as TTN, use can pass the data to Datacake and plot out, currently only support GPS plot.
384 -)))
385 385  
386 -(((
387 387  Instruction is here:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20Data%20Cake/#H7.Example~~-~~-AddTrackerDGPSTrackingInDataCake>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20Data%20Cake/#H7.Example--AddTrackerDGPSTrackingInDataCake]]
388 -)))
389 389  
390 390  
391 391  [[image:1664502695771-538.png]]
... ... @@ -395,13 +395,9 @@
395 395  == 2.5 Integrate with Tago ==
396 396  
397 397  
398 -(((
399 399  After TrackerD sends data to LoRaWAN server such as TTN, use can pass the data to Datacake and plot out, currently only support GPS plot.
400 -)))
401 401  
402 -(((
403 403  Instruction is here: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Tago.IO/#H3.A0Example-CreateTrackerD2FLGT92positioningwidget>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Tago.IO/#H3.A0Example-CreateTrackerD2FLGT92positioningwidget]]
404 -)))
405 405  
406 406  
407 407  [[image:1664502715371-321.png]]
... ... @@ -411,30 +411,22 @@
411 411  == 2.6 Alarm Mode ==
412 412  
413 413  
414 -(((
415 415  User can push the (% style="color:red" %)**RED button**(%%) by more than 5 seconds to enter Alarm Mode.
416 -)))
417 417  
418 418  
419 -(((
420 420  Once enter Alarm mode, the (% style="color:green" %)**GREEN LED**(%%) will flash 3 times, the buzzer will alarm for 5 seconds, then TrackerD will immediately send a packet without location info and then send a data packet with GPS positioning information. After that, the device will send 60 packets at 1-minute intervals. The Alarm flag in the payload will be set for the next 60 packets unless exit alert mode.
421 -)))
422 422  
423 423  
424 -(((
425 425  Two ways to exit alarm mode:
426 -)))
427 427  
428 428  * Server send a downlink command to exit.
429 429  * User fast press the RED button 10 times.
430 430  
431 -(((
432 432  When exit alarm mode, (% style="color:red" %)**RED LED**(%%) will light up for 5 seconds, indicating that the alarm mode is exited. And the alert flag will be set to false.
433 -)))
434 434  
435 435  
436 436  
437 -== 2.7 Sports Mode ==
413 +== 2.7 Sports Mode ~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-- ==
438 438  
439 439  
440 440  
... ... @@ -441,8 +441,8 @@
441 441  == 2.8 LED Status ==
442 442  
443 443  
444 -(% border="1.5" style="background-color:#ffffcc; color:green; width:500px" %)
445 -|=(% style="width: 150px;" %)**Event**|=(% style="width: 200px;" %)**Action**|=(% style="width: 150px;" %)**AT+LON to control on/off**
420 +(% border="2" style="background-color:#ffffcc; color:green; width:636px" %)
421 +|(% style="width:157px" %)**Event**|(% style="width:271px" %)**Action**|(% style="width:202px" %)**AT+LON to control on/off**
446 446  |(% style="width:157px" %)**Power On**|(% style="width:271px" %)(% style="color:blue" %)**BLUE, **(% style="color:red" %)**RED , **(% style="color:green" %)**Green** flash once|(% style="width:202px" %)N/A
447 447  |(% style="width:157px" %)**Join request**|(% style="width:271px" %)(% style="color:green" %)**Green** (%%)led fast blink once (200ms)|(% style="width:202px" %)Yes
448 448  |(% style="width:157px" %)**Join Success**|(% style="width:271px" %)(% style="color:green" %)**Green**(%%) led on 5 second|(% style="width:202px" %)N/A
... ... @@ -457,10 +457,11 @@
457 457  
458 458  
459 459  
436 +
460 460  == 2.9 Button Function ==
461 461  
462 462  
463 -(% style="color:blue" %)**RESET button:**
440 +(% style="color:green" %)**RESET button:**
464 464  
465 465  [[image:1664502835802-546.png]]
466 466  
... ... @@ -472,14 +472,12 @@
472 472  [[image:1664502854406-763.png]]
473 473  
474 474  
475 -(% border="1.5" style="background-color:#ffffcc; color:green; width:520px" %)
476 -|=(% style="width: 100px;" %)**Function**|=(% style="width: 210px;" %)**Action**|=(% style="width: 210px;" %)**Description**
452 +(% border="2" style="background-color:#ffffcc; color:green; width:627px" %)
453 +|(% style="width:135px" %)**Function**|(% style="width:220px" %)**Action**|(% style="width:265px" %)**Description**
477 477  |(% style="width:135px" %)Send Alarm|(% style="width:220px" %)Keep Pressing (% style="color:red" %)**RED**(%%) button for more than 5 seconds|(% style="width:265px" %)Enter Alarm Mode.  See [[Alarm Mode>>||anchor="H2.6AlarmMode"]]
478 478  |(% style="width:135px" %)Exit Alarm Mode|(% style="width:220px" %)Fast press the (% style="color:red" %)**RED** (%%)button 10 times|(% style="width:265px" %)Exit Alarm Mode
479 479  |(% style="width:135px" %)Enter Deep Sleep Mode|(% style="width:220px" %)Press and hold the button for 10 seconds, then quickly press the device 3 times to enter deep sleep|(% style="width:265px" %)This is the mode ship out from factory. CPU will be complete in sleep mode and no LoRa activity, only use before deploy.
480 480  
481 -
482 -
483 483  == 2.10 USB Port Function ==
484 484  
485 485  
... ... @@ -497,7 +497,7 @@
497 497  
498 498  User can configure TrackerD via AT Command or LoRaWAN Downlink.
499 499  
500 -LoRaWAN Downlink instruction for different platforms:  [[IoT LoRaWAN Server>>doc:Main.WebHome]]
475 +LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>doc:Main.WebHome]]
501 501  
502 502  
503 503  
... ... @@ -533,16 +533,16 @@
533 533  
534 534  Set device uplink interval.
535 535  
536 -* (% style="color:blue" %)**AT Command:**
511 +* (% style="color:blue" %)AT Command:
537 537  
538 -(% style="color:#037691" %)**AT+TDC=xxx **
513 +(% style="color:#037691" %)AT+TDC=xxx
539 539  
540 540  Example:  AT+TDC=300000. Means set interval to 5 minutes(300 seconds)
541 541  
542 542  
543 -* (% style="color:blue" %)**Downlink Payload (prefix 0x01):**
518 +* (% style="color:blue" %)Downlink Payload (prefix 0x01):
544 544  
545 -(% style="color:#037691" %)**0x01 00 01 2C**  (%%) ~/~/  Same as AT+TDC=300000
520 +(% style="color:#037691" %)0x01 00 01 2C  (%%)   ~/~/  Same as AT+TDC=300000
546 546  
547 547  
548 548  
... ... @@ -551,16 +551,16 @@
551 551  
552 552  Set alarm packet transmit interval
553 553  
554 -* (% style="color:blue" %)**AT Command:**
529 +* (% style="color:blue" %)AT Command:
555 555  
556 -(% style="color:#037691" %)**AT+ATDC=xx. **
531 +(% style="color:#037691" %)AT+ATDC=xx.
557 557  
558 558  Example:  AT+ATDC=60000  **~-~->    ** Set Alarm Packet Interval to 60 seconds. TrackerD will send every 60 seconds in Alarm mode, Default Value: 60000
559 559  
560 560  
561 -* (% style="color:blue" %)**Downlink Payload (prefix 0xB1):**
536 +*(% style="color:blue" %) Downlink Payload (prefix 0xB1):
562 562  
563 -(% style="color:#037691" %)**0xB1 00 00 3C ** (%%) ~/~/  Same as AT+ATDC=60000
538 +(% style="color:#037691" %)0xB1 00 00 3C  (%%) ~/~/  Same as AT+ATDC=60000
564 564  
565 565  
566 566  
... ... @@ -569,16 +569,16 @@
569 569  
570 570  Set sports packet transmit interval
571 571  
572 -* (% style="color:blue" %)**AT Command:**
547 +* (% style="color:blue" %)AT Command:
573 573  
574 -(% style="color:#037691" %)**AT+MTDC=xx. **
549 +(% style="color:#037691" %)AT+MTDC=xx.
575 575  
576 -Example:  AT+MTDC=300000  **~-~->    ** Set Sports Mode Packet Interval to 300 seconds. TrackerD will send every 300 seconds in Sports mode, Default Value: 300000
551 + Example:  AT+MTDC=300000  **~-~->    ** Set Sports Mode Packet Interval to 300 seconds. TrackerD will send every 300 seconds in Sports mode, Default Value: 300000
577 577  
578 578  
579 -* (% style="color:blue" %)**Downlink Payload (prefix 0x03):**
554 +*(% style="color:blue" %) Downlink Payload (prefix 0x03):
580 580  
581 -(% style="color:#037691" %)**0x03 00 01 2C**  (%%) ~/~/  Same as AT+ MTDC=3000000
556 +(% style="color:#037691" %)0x03 00 01 2C  (%%) ~/~/  Same as AT+ MTDC=3000000
582 582  
583 583  
584 584  
... ... @@ -587,29 +587,30 @@
587 587  
588 588  Server send downlink command to exit Alarm mode
589 589  
590 -* (% style="color:blue" %)**AT Command: No AT Command**
565 +* (% style="color:blue" %)AT Command: No AT Command
591 591  
592 -* (% style="color:blue" %)**Downlink Payload (prefix 0x02):**
593 593  
594 -(% style="color:#037691" %)**0x02 01**    (%%) ~/~/  Exit Alarm Mode
568 +* (% style="color:blue" %)Downlink Payload (prefix 0x02):
595 595  
570 +(% style="color:#037691" %)0x02 01  (%%) ~/~/  Exit Alarm Mode
596 596  
597 597  
573 +
598 598  === 3.2.5 Disable/Enable LED flash ===
599 599  
600 600  
601 601  Disable/Enable LED for position, downlink and uplink
602 602  
603 -* (% style="color:blue" %)**AT Command:**
579 +* (% style="color:blue" %)AT Command:
604 604  
605 -(% style="color:#037691" %)**AT+LON=xx.  (Disable (0), Enable (1), default:1)**
581 +(% style="color:#037691" %)AT+LON=xx.  (Disable (0), Enable (1), default:1)
606 606  
607 -Example: AT+LON=0  **~-~-> ** Disable LED for position, downlink and uplink.
583 + Example: AT+LON=0  **~-~-> ** Disable LED for position, downlink and uplink.
608 608  
609 609  
610 -* (% style="color:blue" %)**Downlink Payload (prefix 0xAE):**
586 +* (% style="color:blue" %)Downlink Payload (prefix 0xAE):
611 611  
612 -(% style="color:#037691" %)**0xAE 00 ** (%%) ~/~/  Same as AT+LON=0
588 +(% style="color:#037691" %)0xAE 00  (%%) ~/~/  Same as AT+LON=0
613 613  
614 614  
615 615  
... ... @@ -618,16 +618,16 @@
618 618  
619 619  User can use this feature to check and set thread hole of movement detect
620 620  
621 -* (% style="color:blue" %)**AT Command:**
597 +* (% style="color:blue" %)AT Command:
622 622  
623 -(% style="color:#037691" %)**AT+INTWK=xx.  (Disable (0), Enable (1), default:0)**
599 +(% style="color:#037691" %)AT+INTWK=xx.  (Disable (0), Enable (1), default:0)
624 624  
625 -Example:  AT+ INTWK =1  **~-~->   ** Enable detect movement.
601 + Example:  AT+ INTWK =1  **~-~->   ** Enable detect movement.
626 626  
627 627  
628 -* (% style="color:blue" %)**Downlink Payload (prefix 0xAF):**
604 +* (% style="color:blue" %)Downlink Payload (prefix 0xAF):
629 629  
630 -(% style="color:#037691" %)**0xAF 01 ** (%%) ~/~/  Same as AT+ INTWK =1
606 +(% style="color:#037691" %)0xAF 01  (%%) ~/~/  Same as AT+ INTWK =1
631 631  
632 632  
633 633  
... ... @@ -646,9 +646,9 @@
646 646  
647 647  
648 648  
649 -* (% style="color:blue" %)**AT Command:**
625 +* (% style="color:blue" %)AT Command:
650 650  
651 -(% style="color:#037691" %)**AT+SMOD=xx. **
627 +(% style="color:#037691" %)AT+SMOD=xx.
652 652  
653 653  
654 654   **Example:**
... ... @@ -660,9 +660,9 @@
660 660   AT+ SMOD =2,3    **~-~->**  (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State。
661 661  
662 662  
663 -* (% style="color:blue" %)**Downlink Payload (prefix 0xA5):**
639 +* (% style="color:blue" %)Downlink Payload (prefix 0xA5):
664 664  
665 -(% style="color:#037691" %)**0xA5 01 00**    (%%) ~/~/  Same as AT+ SMOD =1,0
641 +(% style="color:#037691" %)0xA5 01 00  (%%) ~/~/  Same as AT+ SMOD =1,0
666 666  
667 667  
668 668  
... ... @@ -675,16 +675,16 @@
675 675  If AT+FTIME=0. The GPS module will be always powered and positioning. This will highly increase the power consumption (up to 50mA). When AT+FTIME=0, it will improve fix accuracy and shorten the acquire time for next uplink.
676 676  
677 677  
678 -* (% style="color:blue" %)**AT Command:**
654 +* (% style="color:blue" %)AT Command:
679 679  
680 -(% style="color:#037691" %)**AT+FTIME=xx**  (%%) **~-~-> ** Set to use xx as max fix time.
656 +(% style="color:#037691" %)AT+FTIME=xx  (%%) **~-~-> ** Set to use xx as max fix time.
681 681  
682 682  Example:  AT+FTIME=150
683 683  
684 684  
685 -* (% style="color:blue" %)**Downlink Payload (prefix 0xAA):**
661 +* (% style="color:blue" %)Downlink Payload (prefix 0xAA):
686 686  
687 -(% style="color:#037691" %)**0xAA 00 96 ** (%%) ~/~/  Set AT+FTIME=150
663 +(% style="color:#037691" %)0xAA 00 96  (%%) ~/~/  Set AT+FTIME=150
688 688  
689 689  
690 690  
... ... @@ -697,26 +697,26 @@
697 697  A GPS packet with lower PDOP has higher accuracy. PDOP default value is 2.0
698 698  
699 699  
700 -* (% style="color:blue" %)**AT Command:**
676 +* (% style="color:blue" %)AT Command:
701 701  
702 -(% style="color:#037691" %)**AT+PDOP=2.5 ** (%%) **~-~->  ** Set PDOP to 2.5
678 +(% style="color:#037691" %)AT+PDOP=2.5  (%%) **~-~->  ** Set PDOP to 2.5
703 703  
704 704  
705 -* (% style="color:blue" %)**Downlink Payload (prefix 0xAD):**
681 +* (% style="color:blue" %)Downlink Payload (prefix 0xAD):
706 706  
707 -(% style="color:#037691" %)**0xAD 00 0A**   (%%) ~/~/  Set AT+PDOP=1  (0x0A / 10 =1)
683 +(% style="color:#037691" %)0xAD 00 0A  (%%) ~/~/  Set AT+PDOP=1  (0x0A / 10 =1)
708 708  
709 -(% style="color:#037691" %)**0xAD 00 19**   (%%) ~/~/  Set AT+PDOP=2.5    (0x19 / 10 =2.5)
685 +(% style="color:#037691" %)0xAD 00 19  (%%) ~/~/  Set AT+PDOP=2.5    (0x19 / 10 =2.5)
710 710  
711 -(% style="color:#037691" %)**0xAD 00 46**    (%%) ~/~/  Set AT+PDOP=7  (0x46 / 10 =7)
687 +(% style="color:#037691" %)0xAD 00 46  (%%) ~/~/  Set AT+PDOP=7  (0x46 / 10 =7)
712 712  
713 713  
714 714  
715 715  Disable/Enable the confirmation mode
716 716  
717 -* (% style="color:blue" %)**AT Command:**
693 +* (% style="color:blue" %)AT Command:
718 718  
719 -(% style="color:#037691" %)**AT+CFM=xx. **
695 +(% style="color:#037691" %)AT+CFM=xx.
720 720  
721 721  
722 722  **~ Example:**
... ... @@ -726,9 +726,9 @@
726 726   AT+ CFM=1    **~-~->  ** Enable confirmation
727 727  
728 728  
729 -* (% style="color:blue" %)**Downlink Payload (prefix 0x05):**
705 +* (% style="color:blue" %)Downlink Payload (prefix 0x05):
730 730  
731 -(% style="color:#037691" %)**0x05 01 **(%%) ~/~/  Same as AT+ SMOD =1
707 +(% style="color:#037691" %)0x05 01 (%%)  ~/~/  Same as AT+ SMOD =1
732 732  
733 733  
734 734  
... ... @@ -760,9 +760,11 @@
760 760  After installation of the driver and plug in TrackerD, user should be able to see com port in PC's device manager.
761 761  
762 762  
763 -(% style="color:blue" %)**Step3:  **(%%)Download and Install Flash Tool:  [[https:~~/~~/www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools>>url:https://www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools]]
739 +(% style="color:blue" %)**Step3：**(%%) Download and Install Flash Tool:
764 764  
741 +[[https:~~/~~/www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools>>url:https://www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools]]
765 765  
743 +
766 766  (% style="color:blue" %)**Step4:** (%%) Run Flash Download Tool and configure chip type to ESP32
767 767  
768 768  
... ... @@ -803,21 +803,21 @@
803 803  === 6.1.1 Set up ARDUINO compile environment ===
804 804  
805 805  
806 -* **Download the latest Arduino software (IDE) from the Arduino official website:  [[https:~~/~~/www.arduino.cc/en/Main/Software>>url:https://www.arduino.cc/en/Main/Software]]**
784 +* Download the latest Arduino software (IDE) from the Arduino official website:  [[https:~~/~~/www.arduino.cc/en/Main/Software>>url:https://www.arduino.cc/en/Main/Software]]
807 807  
808 -Install IDE on PC, open and click (% style="color:#037691" %)**File ~-~-> Preference**,(%%) add the following URL:  [[https:~~/~~/dl.espressif.com/dl/package_esp32_index.json>>url:https://links.jianshu.com/go?to=https%3A%2F%2Fdl.espressif.com%2Fdl%2Fpackage_esp32_index.json]]
786 +Install IDE on PC, open and click **File ~-~-> Preference**, add the following URL:  [[https:~~/~~/dl.espressif.com/dl/package_esp32_index.json>>url:https://links.jianshu.com/go?to=https%3A%2F%2Fdl.espressif.com%2Fdl%2Fpackage_esp32_index.json]]
809 809  
810 810  
811 811  [[image:1664503635019-941.png]]
812 812  
813 813  
814 -* (% style="color:#037691" %)**Go to tools ~-~-> Boards ~-~-> Boards Manager**,(%%) **find the esp32 information and install it.**
792 +* Go to tools ~-~-> Boards ~-~-> Boards Manager, find the esp32 information and install it.
815 815  
816 816  [[image:1664503715811-892.png]]
817 817  
818 818  
819 819  
820 -* **Download the latest TrackerD from the dragino github: [[https:~~/~~/github.com/dragino/TrackerD>>url:https://github.com/dragino/TrackerD]]**
798 +* Download the latest TrackerD from the dragino github: [[https:~~/~~/github.com/dragino/TrackerD>>url:https://github.com/dragino/TrackerD]]
821 821  
822 822  Put the Library in the TrackerD directory into the libraries file in the Arduino directory:
823 823  
... ... @@ -829,19 +829,19 @@
829 829  == 6.2 Source Code ==
830 830  
831 831  
832 -* (% style="color:blue" %)**Open the example in the TrackerD file, please select the correct port in the IDE, as shown below:**
810 +* Open the example in the TrackerD file, please select the correct port in the IDE, as shown below:
833 833  
834 834  [[image:1664503794261-827.png]]
835 835  
836 836  
837 837  
838 -* (% style="color:blue" %)**Click to upload**
816 +* Click to upload
839 839  
840 840  [[image:1664503808294-336.png]]
841 841  
842 842  
843 843  
844 -* (% style="color:blue" %)**Check the result, if the upload is successful, as shown below, open the serial port to view the data**
822 +* Check the result, if the upload is successful, as shown below, open the serial port to view the data
845 845  
846 846  [[image:1664503824081-592.png]] [[image:1664503831430-500.png]]
847 847  
... ... @@ -853,7 +853,7 @@
853 853  == 7.1 How to change the LoRa Frequency Bands/Region? ==
854 854  
855 855  
856 -User can follow the introduction for [[how to upgrade image>>||anchor="H5.UploadFirmware"]]. When download the images, choose the required image file for download.
834 +User can follow the introduction for [[how to upgrade image>>path:#upgrade_image]]. When download the images, choose the required image file for download.
857 857  
858 858  
859 859  
... ... @@ -864,8 +864,8 @@
864 864  
865 865  
866 866  
867 -(% border="1.5" cellspacing="3" style="background-color:#ffffcc; color:green; width:314px" %)
868 -|=(% style="width: 118px;" %)**Pin**|=(% style="width: 67px;" %)**Color**|=(% style="width: 123px;" %)**USB Pin**
845 +(% border="2" style="background-color:#ffffcc; color:green; width:314px" %)
846 +|(% style="width:118px" %)**Pin**|(% style="width:67px" %)**Color**|(% style="width:123px" %)**USB Pin**
869 869  |(% style="width:118px" %)A4,B4,A9,B9|(% style="width:67px" %)Red|(% style="width:123px" %)VCC
870 870  |(% style="width:118px" %)A7,B7|(% style="width:67px" %)White|(% style="width:123px" %)D- (N/A)
871 871  |(% style="width:118px" %)A6,B6|(% style="width:67px" %)Green|(% style="width:123px" %)D+(N/A)
... ... @@ -875,9 +875,6 @@
875 875  |(% style="width:118px" %)A8|(% style="width:67px" %)Yellow|(% style="width:123px" %)MTMS/GPIO14
876 876  |(% style="width:118px" %)B8|(% style="width:67px" %)Grey|(% style="width:123px" %)MTDO/GPIO15
877 877  
878 -
879 -
880 -
881 881  = 8.  Order Info =
882 882  
883 883  
... ... @@ -893,31 +893,25 @@
893 893  * (% style="color:red" %)**AU915**(%%): Default frequency band AU915
894 894  * (% style="color:red" %)**US915**(%%): Default frequency band US915
895 895  
896 -
897 -
898 898  = 9.  Packing Info =
899 899  
900 900  
901 -(% style="color:#037691" %)**Package Includes**:
874 +**Package Includes**:
902 902  
903 903  * TrackerD LoRaWAN GPS/BLE Tracker x 1
904 904  * USB recharge & program cable x 1
905 905  
906 -(% style="color:#037691" %)**Dimensions and Weight**:
879 +**Dimensions and Weight**:
907 907  
908 908  * Device Size: 85 x 48 x 15 cm
909 909  * Weight: 50g
910 910  
911 -
912 -
913 913  = 10. Support =
914 914  
915 915  
916 916  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
917 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]].
888 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]]
918 918  
919 -
920 -
921 921  = 11.  Reference =
922 922  
923 923  
... ... @@ -924,5 +924,3 @@
924 924  * [[**Firmware in Bin format**>>https://www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0]]
925 925  * **[[Source Code>>https://github.com/dragino/TrackerD]] **
926 926  * [[**Hardware Source**>>https://www.dropbox.com/sh/orwoy6cecb89m4e/AAD37sRuUrvKsHgAJxuVTkB5a?dl=0]]
927 -
928 -

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0