Last modified by Xiaoling on 2025/04/27 16:48
<
From version < 51.31 >
edited by Xiaoling
on 2022/09/30 16:44
To version < 66.2 >
edited by Xiaoling
on 2022/10/09 15:50
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -61,13 +61,11 @@
61 61  * EEPROM: 520 KB
62 62  * Clock Speed: 32Mhz
63 63  
64 -
65 65  (% style="color:blue" %)**Common DC Characteristics:**
66 66  
67 67  * Supply Voltage: 5V via USB port or Internal li-on battery
68 68  * Operating Temperature: -40 ~~ 60°C
69 69  
70 -
71 71  (% style="color:blue" %)**LoRa Spec:**
72 72  
73 73  * Frequency Range,
... ... @@ -89,12 +89,10 @@
89 89  * Packet engine up to 256 bytes with CRC.
90 90  * LoRaWAN 1.0.3 Specification
91 91  
92 -
93 93  (% style="color:blue" %)**Battery:**
94 94  
95 95  * 1000mA Li-on Battery power (for model TrackerD)
96 96  
97 -
98 98  (% style="color:blue" %)**Power Consumption**
99 99  
100 100  * Sleeping Mode: 200uA
... ... @@ -101,8 +101,6 @@
101 101  * LoRa Transmit Mode: 125mA @ 20dBm 44mA @ 14dBm
102 102  * Tracking: max: 38mA
103 103  
104 -
105 -
106 106  == 1.3  Features ==
107 107  
108 108  
... ... @@ -121,8 +121,6 @@
121 121  * Tri-color LED, Alarm button
122 122  * Datalog
123 123  
124 -
125 -
126 126  == 1.4  Applications ==
127 127  
128 128  
... ... @@ -129,8 +129,6 @@
129 129  * Logistics and Supply Chain Management
130 130  * Human tracking
131 131  
132 -
133 -
134 134  = 2.1 Use TrackerD =
135 135  
136 136  
... ... @@ -193,14 +193,15 @@
193 193  (% style="color:blue" %)**Step 3:**(%%) TrackerD will auto join to the LoRaWAN network. After join success, TrackerD will start to upload message to IoT server.
194 194  
195 195  
196 -(% style="color:blue" %)**Positioning Mode(SMOD):**
186 +== 2.3 Positioning Mode(SMOD) ==
197 197  
198 -* (% style="color:#037691" %)**GPS ONLY(Factory Settings):    **(%%)only get GPS location info.
199 -* (% style="color:#037691" %)**BLE ONLY:              **(%%)Only obtain iBeacon info via BLE. Design for Indoor tracking.
200 -* (% style="color:#037691" %)**GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.
188 +Users can set TrackerD to different Positioning Mode for different applications. Below mod are supported.
201 201  
202 -User can switch modes by [[changing SMOD>>||anchor="H3.2.7SetPositioningMode"]].
190 +* (% style="color:#037691" %)**GPS ONLY(Factory Settings):    **(%%)only get and uplink GPS location info.
191 +* (% style="color:#037691" %)**BLE ONLY:              **(%%)Only obtain iBeacon info via BLE and uplink. Design for Indoor tracking.
192 +* (% style="color:#037691" %)**GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.Devices will try to search BLE iBeacon first. If device can't find the iBeacon, it will use GPS for positioning.
203 203  
194 +Users can switch modes by [[changing SMOD>>||anchor="H3.2.7SetPositioningMode"]].
204 204  
205 205  
206 206  == 2.3 Uplink Payload ==
... ... @@ -209,26 +209,73 @@
209 209  === 2.3.1 Uplink FPORT~=5, Device Status ===
210 210  
211 211  
203 +Uplink the device configures with FPORT=5. Once LGT92 Joined the network, it will uplink this message to the server. After first uplink, LHT52 will uplink Device Status every 12 hours.
212 212  
213 -=== 2.3.2 Uplink FPORT~= , Realtime GNSS Positioning ===
214 214  
206 +(% border="1.5" style="background-color:#ffffcc; color:green; width:520px" %)
207 +|=(% scope="row" style="width: 108px;" %)**Size(bytes)**|=(% style="width: 82px;" %)**1**|=(% style="width: 83px;" %)**2**|=(% style="width: 94px;" %)**1**|=(% style="width: 84px;" %)**1**|=(% style="width: 44px;" %)2|=(% style="width: 63px;" %)**2**|=(% style="width: 60px;" %)1
208 +|=(% style="width: 108px;" %)**Value**|(% style="width:82px" %)Sensor Model|(% style="width:83px" %)Firmware Version|(% style="width:94px" %)Frequency Band|(% style="width:84px" %)Sub-band|(% style="width:44px" %)BAT|(% style="width:63px" %)SMOD|(% style="width:60px" %)Status
215 215  
216 -The default uplink payload includes totally 11 bytes. (User can use AT+MOD=0 to enable the Temperature and humidity sensor to hum/tem info from accelerometer. When accelerometer info is enable, total payload will be 15 bytes, please note 15 bytes won't work on DR0 on US915/AU915 frequency band. )
210 +[[image:1665301570342-765.png]]
217 217  
218 218  
213 +Example Payload (FPort=5):  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT52%20-%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220621105116-11.png?rev=1.1||alt="image-20220621105116-11.png"]]
214 +
215 +**Sensor Model**: For TrackerD, this value is 0x13.
216 +
217 +**Firmware Version**: 0x0100, Means: v1.0.0 version.
218 +
219 +**Frequency Band**:
220 +
221 +*0x01: EU868
222 +
223 +*0x02: US915
224 +
225 +*0x03: IN865
226 +
227 +*0x04: AU915
228 +
229 +*0x05: KZ865
230 +
231 +*0x06: RU864
232 +
233 +*0x07: AS923
234 +
235 +*0x08: AS923-1
236 +
237 +*0x09: AS923-2
238 +
239 +*0x0a: AS923-3
240 +
241 +**Sub-Band**: value 0x00 ~~ 0x08(only for CN470, AU915,US915. Others are0x00)
242 +
243 +**BAT**: shows the battery voltage for TrackerD.
244 +
245 +Ex1: 0x0B3A = 2874mV
246 +
247 +Use can also get the Device Status uplink through the downlink command:
248 +
249 +
250 +
251 +=== 2.3.2 Uplink FPORT~=2, Realtime GNSS Positioning + Temperature & Humidity ===
252 +
253 +
254 +User can use **AT+SMOD=1,0** to enable uploading on-board Temperature and humidity values, and the total payload will be 15 bytes, please note that 15 bytes won't work on DR0 on US915/AU915 frequency band.
255 +
256 +
219 219  (% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:480px" %)
220 220  |=(% scope="row" style="width: 50px;" %)(((
221 221  **Size(bytes)**
222 -)))|(% style="width:60px" %)4|(% style="width:70px" %)4|(% style="width:80px" %)2|(% style="width:50px" %)1|(% style="width:88px" %)(((
223 -2(optional)
260 +)))|(% style="width:60px" %)4|(% style="width:70px" %)4|(% style="width:80px" %)2|(% style="width:73px" %)1|(% style="width:40px" %)(((
261 +2
224 224  )))|(% style="width:87px" %)(((
225 -2(optional)
263 +2
226 226  )))
227 227  |=(% style="width: 69px;" %)**Value**|(% style="width:76px" %)[[Latitude>>||anchor="HLocationinfo:"]]|(% style="width:87px" %)[[Longitude>>||anchor="HLocationinfo:"]]|(% style="width:76px" %)(((
228 228  [[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
229 -)))|(% style="width:52px" %)[[FLAG>>||anchor="HFLAG:"]]|(% style="width:88px" %)[[Hum>>||anchor="HHum:"]]|(% style="width:87px" %)[[Tem>>||anchor="HTem:"]]
267 +)))|(% style="width:73px" %)[[FLAG>>||anchor="HFLAG:"]]|(% style="width:40px" %)[[Hum>>||anchor="HHum:"]]|(% style="width:87px" %)[[Tem>>||anchor="HTem:"]]
230 230  
231 -[[image:1664501958445-288.png]]
269 +[[image:1665301636888-168.png]]
232 232  
233 233  
234 234  ==== (% style="color:blue" %)**Alarm & BAT:**(%%) ====
... ... @@ -237,12 +237,11 @@
237 237  |=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)1 bit|(% style="width:80px" %)1bit|(% style="width:50px" %)14bits
238 238  |=(% style="width: 72px;" %)**Value**|(% style="width:67px" %)reserve|(% style="width:118px" %)Alarm Indicate|(% style="width:63px" %)[[BAT>>||anchor="HBAT:"]] 
239 239  
240 -
241 241  ==== (% style="color:blue" %)**FLAG:**(%%) ====
242 242  
243 243  (% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:250px" %)
244 -|=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)2bits|(% style="width:50px" %)1bit|(% style="width:100px" %)5 bits
245 -|=(% style="width: 79px;" %)**Value**|(% style="width:55px" %)[[MOD>>||anchor="H3.2.7SetPositioningMode"]]|(% style="width:47px" %)[[LON>>||anchor="HLON:"]]|(% style="width:140px" %)Firmware version 
281 +|=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)2bits|(% style="width:50px" %)1bit
282 +|=(% style="width: 79px;" %)**Value**|(% style="width:55px" %)[[MOD>>||anchor="H3.2.7SetPositioningMode"]]|(% style="width:47px" %)[[LON>>||anchor="HLON:"]]
246 246  
247 247  **Example:** Payload: 0x02863D68 FAC29BAF 4B45 60 0202 011A 
248 248  
... ... @@ -252,22 +252,18 @@
252 252  * Latitude: 02863D68  ⇒  //if (0x//02863D68//& 0x80000000 = 0 )~://  //value = 02863D68 /1000000 = 42.351976//
253 253  * Longitude: FAC29BAF  ⇒ //if (0x//FAC29BAF// & 0x80000000 = 1 )~://  //value = (0x//FAC29BAF// – 0x 100000000)/1000000 =//-87.9094//57//
254 254  
255 -
256 256  (% style="color:red" %)**Important note:**
257 257  
258 258  1.  When power is low (<2.84v), GPS won't be able to get location info and GPS feature will be disabled and the location field will be filled with 0x0FFFFFFF, 0x0FFFFFFF.
259 259  
260 -2.  In firmware version v1.5, Roll & Pitch is disabled by default.
296 +2.  In this mode, the total payload will be 15 bytes, while US915/AU915 DR0 accepts only 11 bytes payload. In this case, the payload on server will be ignore and shows as below:
261 261  
262 -3.  When enable 9-axis motion sensor, the total payload will be 15 bytes, while US915/AU915 DR0 accept only 11 bytes payload. In this case, the payload on server will be ignore and shows as below:
263 263  
264 -
265 265  [[image:1664502116362-706.png]]
266 266  
267 267  
302 +3.  While GPS can't get location info after timeout(FTIME Parameter), the latitude and longitude will be filled with all 0x00:
268 268  
269 -4.  While GPS can't get location info after timeout(FTIME Parameter), the latitude and longitude will be filled with all 0x00:
270 -
271 271  [[image:1664502166010-515.png]]
272 272  
273 273  
... ... @@ -282,7 +282,7 @@
282 282  Example:  0x0CDD & 0x3FFF ⇒ 3293 (mV).
283 283  
284 284  (((
285 -The battery info shows the current voltage, for (% style="color:blue" %)**TrackerD**(%%) version which powered by li-on battery. User can use below mapping to indicate the battery in percentage: \
318 +The battery info shows the battery voltage, User can use the below mapping to indicate the battery in percentage: \
286 286  )))
287 287  
288 288  * > 4.0v :  80% ~~ 100%
... ... @@ -291,11 +291,8 @@
291 291  * 3.40v ~~ 3.69v:  20% ~~ 40%
292 292  * < 3.39v:  0~~20%
293 293  
294 -
295 -
296 296  ==== (% style="color:blue" %)**LON:**(%%) ====
297 297  
298 -
299 299  Enable/Disable LED activity for uplink
300 300  
301 301  (((
... ... @@ -318,15 +318,52 @@
318 318  
319 319  
320 320  
321 -=== 2.3.3 Uplink FPORT~= , History GNSS Positioning ===
351 +=== 2.3.3  Uplink FPORT~=3, Realtime GNSS Positioning (Default Mode) ===
322 322  
323 323  
354 +The default uplink payload includes totally 11 bytes. The payload is the first 11 bytes of Uplink FPORT=2, real-time GNSS positioning, (remove the temp and humidity)
324 324  
325 -=== 2.3.4 BLE positioning Payload(Fport2) ===
326 326  
357 +(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:480px" %)
358 +|=(% scope="row" style="width: 50px;" %)(((
359 +**Size(bytes)**
360 +)))|(% style="width:60px" %)4|(% style="width:70px" %)4|(% style="width:80px" %)2|(% style="width:73px" %)1
361 +|=(% style="width: 69px;" %)**Value**|(% style="width:76px" %)[[Latitude>>||anchor="HLocationinfo:"]]|(% style="width:87px" %)[[Longitude>>||anchor="HLocationinfo:"]]|(% style="width:76px" %)(((
362 +[[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
363 +)))|(% style="width:73px" %)[[FLAG>>||anchor="HFLAG:"]]
327 327  
328 -Different MODE has different payload:  (% style="color:blue" %)**MODE=2**
329 329  
366 +(% class="wikigeneratedid" %)
367 +[[image:1665301687277-443.png]]
368 +
369 +
370 +
371 +=== 2.3.4  Uplink FPORT~=4, History GNSS Positioning ===
372 +
373 +
374 +Set [[PNACKMD=1>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H4.13AutoSendNone-ACKmessages]], and TrackerD will wait for ACK for every uplink, when there is no LoRaWAN network, TrackerD will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
375 +
376 +
377 +**Note for this mode:**
378 +
379 +* a) TrackerD will do an ACK check for data records sending to make sure every data arrive server.
380 +* b) TrackerD will send data in **CONFIRMED Mode** when PNACKMD=1, but TrackerD won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink, if TrackerD gets an ACK, TrackerD will consider there is a network connection and resend all NONE-ACK Messages.
381 +
382 +The payload is 15 bytes, as below.
383 +
384 +(% border="1.5" style="background-color:#ffffcc; color:green; width:520px" %)
385 +|=(% scope="row" %)(((
386 +**Size(bytes)**
387 +)))|4|4|2|1|1|1|1|1
388 +|=**Value**|[[Latitude>>path:#Location]]|[[Longitude>>path:#Location]]|[[Year>>path:#Alarm]]|Month|Day|Hous|Min|[[Sen>>path:#Pitch]]
389 +
390 +[[image:1665301786397-168.png]]
391 +
392 +
393 +
394 +=== 2.3.5  Uplink FPORT~=6, BLE Positioning with Strongest iBeacon ===
395 +
396 +
330 330  (% border="1.5" cellspacing="3" style="background-color:#ffffcc; color:green; width:450px" %)
331 331  |=(% scope="row" style="width: 60px;" %)(((
332 332  **Size(bytes)**
... ... @@ -354,8 +354,6 @@
354 354  * (% style="color:#037691" %)**Measured Power: ** (%%) The Measured Power from the strongest iBeacon.
355 355  * (% style="color:#037691" %)**RSSI:  ** (%%) The RSSI from the strongest iBeacon.
356 356  
357 -
358 -
359 359  === 2.3.5 Add Payload format in TTN V3 ===
360 360  
361 361  
... ... @@ -408,6 +408,10 @@
408 408  
409 409  
410 410  
476 +== 2.6 Datalog Feature ==
477 +
478 +total 273 entries,by default disable
479 +
411 411  == 2.6 Alarm Mode ==
412 412  
413 413  
... ... @@ -434,10 +434,12 @@
434 434  
435 435  
436 436  
437 -== 2.7 Sports Mode ==
506 +== 2.7 Transport Mode ==
438 438  
439 439  
509 +In Transport Mode, TrackerD will check if there is motion. If there is no motion, device will send uplinks every 20 minutes. If there is motion, device will send uplink every 5 minutes.
440 440  
511 +
441 441  == 2.8 LED Status ==
442 442  
443 443  
... ... @@ -455,7 +455,6 @@
455 455  |(% style="width:157px" %)**Get Downlink**|(% style="width:271px" %)(% style="color:green" %)**GREEN**(%%) led on 1 second|(% style="width:202px" %)Yes
456 456  |(% style="width:157px" %)**Movement Detect**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)led on 500ms|(% style="width:202px" %)N/A
457 457  
458 -
459 459  == 2.9 Button Function ==
460 460  
461 461  
... ... @@ -477,7 +477,6 @@
477 477  |(% style="width:135px" %)Exit Alarm Mode|(% style="width:220px" %)Fast press the (% style="color:red" %)**RED** (%%)button 10 times|(% style="width:265px" %)Exit Alarm Mode
478 478  |(% style="width:135px" %)Enter Deep Sleep Mode|(% style="width:220px" %)Press and hold the button for 10 seconds, then quickly press the device 3 times to enter deep sleep|(% style="width:265px" %)This is the mode ship out from factory. CPU will be complete in sleep mode and no LoRa activity, only use before deploy.
479 479  
480 -
481 481  == 2.10 USB Port Function ==
482 482  
483 483  
... ... @@ -488,8 +488,6 @@
488 488  * [[Configure Device>>||anchor="H3.ConfigureTrackerDviaATcommandorLoRaWANdownlink"]]
489 489  * [[Upgrade Firmware>>||anchor="H5.UploadFirmware"]]
490 490  
491 -
492 -
493 493  = 3. Configure TrackerD via AT command or LoRaWAN downlink =
494 494  
495 495  
... ... @@ -562,16 +562,16 @@
562 562  
563 563  
564 564  
565 -=== 3.2.3 Set Sports Mode Packet transmission interval ===
632 +=== 3.2.3 Set Transport Mode Packet transmission interval ===
566 566  
567 567  
568 -Set sports packet transmit interval
635 +Set Transport Mode packet transmit interval
569 569  
570 570  * (% style="color:blue" %)**AT Command:**
571 571  
572 572  (% style="color:#037691" %)**AT+MTDC=xx. **
573 573  
574 -Example:  AT+MTDC=300000  **~-~->    ** Set Sports Mode Packet Interval to 300 seconds. TrackerD will send every 300 seconds in Sports mode, Default Value: 300000
641 +Example:  AT+MTDC=300000  **~-~->    ** Set Transport Mode Packet Interval to 300 seconds. TrackerD will send every 300 seconds in Transport mode, Default Value: 300000
575 575  
576 576  
577 577  * (% style="color:blue" %)**Downlink Payload (prefix 0x03):**
... ... @@ -611,16 +611,16 @@
611 611  
612 612  
613 613  
614 -=== 3.2.6 Disable/Enable movement detect (Debug Only) ===
681 +=== 3.2.6 Disable/Enable Transport Mode ===
615 615  
616 616  
617 -User can use this feature to check and set thread hole of movement detect
684 +Users can use this feature to enable/disable Transport Mode.
618 618  
619 619  * (% style="color:blue" %)**AT Command:**
620 620  
621 621  (% style="color:#037691" %)**AT+INTWK=xx.  (Disable (0), Enable (1), default:0)**
622 622  
623 -Example:  AT+ INTWK =1  **~-~->   ** Enable detect movement.
690 +Example:  AT+ INTWK =1  **~-~->   ** Enable Transport Mode.
624 624  
625 625  
626 626  * (% style="color:blue" %)**Downlink Payload (prefix 0xAF):**
... ... @@ -632,23 +632,30 @@
632 632  === 3.2.7 Set Positioning Mode ===
633 633  
634 634  
635 -SMOD define the how TrackerD scan and uplink date.
702 +SMOD define the how TrackerD scan and uplink data:
636 636  
637 -GPS室外定位模式：  设备默认模式，设备入网后会发送device当前模式下的信息，随后立即定位发送数据包（默认是3分钟定位，超过将发送无效数据），如果出现意外情况下，快速按键3下，将会发出报警消息（默认每分钟发送一次）。GPS还有一种logdata模式，在断网的情况下将数据存储下来，等到有网的时候，一次将数据以每10秒上报。
638 638  
639 -BLE室内定位模式：  设备入网后会发送device当前模式下的信息，随后立即定位发送数据包（默认是5秒，超过将发送无效数据），如果出现意外情况下，快速按键3下，将会发出报警消息（默认每3分钟发送一次）。
705 +* (% style="color:blue" %)**AT Command:**
640 640  
641 -GPS和BLE混动模式：设备入网后会发送device当前模式下的信息，随后立即判断是否在室内，如果是就进行BLE定位，不是就GPS定位。如果出现意外情况下，快速按键3下，将会发出报警消息（默认每分钟发送一次）。
707 +(% style="color:#037691" %)**AT+SMOD=aa,bb**
642 642  
643 -运动模式：  设备入网后会发送device当前模式下的信息，随后发送GPS定位数据，设备判断是否在运动，没有运动传感器没有检测到动作，立即进入静止状态（默认20分钟），如果产生运动，将每5分钟发送一次数据，再第五分钟后检测设备有误运动，无将切换到静止状态，有立即发送数据。
709 +(% style="color:#037691" %)** aa:**
644 644  
711 +* (% style="color:#037691" %)**1: GPS ONLY(Factory Settings):    **(%%)only get and uplink GPS location info.
712 +* (% style="color:#037691" %)**2: BLE ONLY:              **(%%)Only obtain iBeacon info via BLE and uplink. Design for Indoor tracking.
713 +* (% style="color:#037691" %)**3: GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.Devices will try to search BLE iBeacon first. If device can't find the iBeacon, it will use GPS for positioning
645 645  
715 +(% style="color:#037691" %)**bb:**
646 646  
647 -* (% style="color:blue" %)**AT Command:**
717 +(% style="color:#037691" %)** if aa = 1: **
648 648  
649 -(% style="color:#037691" %)**AT+SMOD=xx. **
719 +* (% style="color:#037691" %)**0 :  **(%%)GPS+ BAT+ State+Tem&Hum
720 +* (% style="color:#037691" %)**1 :**(%%)  GPS +BAT State
650 650  
722 +(% style="color:#037691" %)** if aa = 2: **
651 651  
724 +* (% style="color:#037691" %)**3 :  **(%%)(iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State
725 +
652 652   **Example:**
653 653  
654 654   AT+ SMOD =1,0  **~-~-> ** GPS+ BAT+ State+Tem&Hum
... ... @@ -655,7 +655,7 @@
655 655  
656 656   AT+ SMOD =1,1    **~-~->**  GPS +BAT State
657 657  
658 - AT+ SMOD =2,3    **~-~->**  (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State。
732 + AT+ SMOD =2,3    **~-~->**  (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State
659 659  
660 660  
661 661  * (% style="color:blue" %)**Downlink Payload (prefix 0xA5):**
... ... @@ -873,7 +873,6 @@
873 873  |(% style="width:118px" %)A8|(% style="width:67px" %)Yellow|(% style="width:123px" %)MTMS/GPIO14
874 874  |(% style="width:118px" %)B8|(% style="width:67px" %)Grey|(% style="width:123px" %)MTDO/GPIO15
875 875  
876 -
877 877  = 8.  Order Info =
878 878  
879 879  
... ... @@ -889,8 +889,6 @@
889 889  * (% style="color:red" %)**AU915**(%%): Default frequency band AU915
890 890  * (% style="color:red" %)**US915**(%%): Default frequency band US915
891 891  
892 -
893 -
894 894  = 9.  Packing Info =
895 895  
896 896  
... ... @@ -904,8 +904,6 @@
904 904  * Device Size: 85 x 48 x 15 cm
905 905  * Weight: 50g
906 906  
907 -
908 -
909 909  = 10. Support =
910 910  
911 911  
... ... @@ -912,8 +912,6 @@
912 912  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
913 913  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]].
914 914  
915 -
916 -
917 917  = 11.  Reference =
918 918  
919 919  
1665301570342-765.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +31.6 KB
Content
1665301636888-168.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +36.6 KB
Content
1665301687277-443.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +22.6 KB
Content
1665301786397-168.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +22.6 KB
Content
image-20221006181316-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +17.7 KB
Content
image-20221006181357-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +88.0 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0