Skip to Content
Last modified by Xiaoling on 2025/04/27 16:48
From version 51.31
edited by Xiaoling
on 2022/09/30 16:44
Change comment: There is no comment for this version
To version 46.1
edited by Xiaoling
on 2022/09/30 10:09
Change comment: Uploaded new attachment "1664503752288-974.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -1,13 +7,6 @@
1 -(% style="text-align:center" %)
2 -[[image:1664505654417-133.png]]
3 -
4 -
5 -
6 -
7 7  (% class="wikigeneratedid" %)
8 8  **Table of Contents:**
9 9  
10 -{{toc/}}
11 11  
12 12  
13 13  
... ... @@ -14,10 +14,9 @@
14 14  
15 15  = 1.  Introduction =
16 16  
10 +== 1.1  OverView ==
17 17  
18 -== 1.1  What is TrackerD ==
19 19  
20 -
21 21  (((
22 22  TrackerD is an (% style="color:blue" %)**Open Source LoRaWAN Tracker**(%%) based on (% style="color:blue" %)**ESP32 MCU**(%%) and (% style="color:blue" %)**Semtech LoRa Wireless Chip**.
23 23  )))
... ... @@ -25,14 +25,10 @@
25 25  (((
26 26  In TrackerD, there are various sensors such as GPS, WiFi, BLE, Temperature, Humidity, Motion Detection, and Buzzer. User can use TrackerD for different tracking scenario.
27 27  
28 -(((
29 29  TrackerD is program friendly. Developers can use Arduino IDE to customize the software of TrackerD to fit their IoT solution.
30 -)))
31 31  
32 -(((
33 33  The LoRa wireless technology used in TrackerD allows the user to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional tracking services.
34 34  )))
35 -)))
36 36  
37 37  (((
38 38  TrackerD is equipped with a (% style="color:blue" %)**1000mAh Li-on rechargeable battery**(%%). Each TrackerD has a worldwide unique OTAA keys to join the LoRaWAN network.
... ... @@ -46,7 +46,6 @@
46 46  (% style="color:red" %)**Note: LoRaWAN server can be a general LoRaWAN server other than TTN.**
47 47  
48 48  
49 -
50 50  == 1.2 Specifications ==
51 51  
52 52  
... ... @@ -103,6 +103,7 @@
103 103  
104 104  
105 105  
93 +
106 106  == 1.3  Features ==
107 107  
108 108  
... ... @@ -109,7 +109,7 @@
109 109  * LoRaWAN 1.0.3 Class A
110 110  * ESP32 PICO D4
111 111  * SX1276/78 Wireless Chip
112 -* Arduino IDE Compatible
100 +* Arduino IDE Compatible
113 113  * Open source hardware / software
114 114  * Regular/ Real-time GPS,BLE,WIFI tracking
115 115  * Built-in3 axis accelerometer (LIS3DH)
... ... @@ -131,9 +131,9 @@
131 131  
132 132  
133 133  
122 +
134 134  = 2.1 Use TrackerD =
135 135  
136 -
137 137  == 2.1 How it works? ==
138 138  
139 139  
... ... @@ -140,271 +140,249 @@
140 140  TrackerD is configured as LoRaWAN OTAA Class A GPS tracker by default. It has OTAA keys to join LoRaWAN network. To connect a LoRaWAN network, user need to input the OTAA keys in the LoRaWAN IoT server and push reset button of TrackerD (next to USB port). TrackerD will wake up and auto join the network via OTAA.
141 141  
142 142  
143 -
144 144  == 2.2 Quick guide to connect to LoRaWAN server ==
145 145  
133 +Here is an example for how to join the [[TTNv3 LoRaWAN Network>>url:https://eu1.cloud.thethings.network]]. Below is the network structure, we use LPS8N as LoRaWAN gateway in this example.
146 146  
147 -Here is an example for how to join the [[TTNv3 LoRaWAN Network>>url:https://eu1.cloud.thethings.network]]. Below is the network structure, we use LPS8N as LoRaWAN gateway in this example. 
148 148  
136 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image001.png]]
149 149  
150 -[[image:1664501652064-326.png]]
151 151  
152 -
153 -
154 154  The LPS8N is already set to connect to [[TTN V3 network >>url:https://eu1.cloud.thethings.network/]]. What the rest need to is register this device in TTN V3:
155 155  
141 +**(% style="color:blue" %)Step 1**:(%%) Create a device in TTN V3 with the OTAA keys from TrackerD.
156 156  
157 -(% style="color:blue" %)**Step 1**:(%%) Create a device in TTN V3 with the OTAA keys from TrackerD.
158 -
159 159  Each TrackerD is shipped with a sticker with the default device EUI as below:
160 160  
145 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image002.png]]
161 161  
162 -[[image:1664501677253-891.png]]
163 163  
164 164  
149 +
165 165  Input these keys to their LoRaWAN Server portal. Below is TTN V3 screen shot:
166 166  
167 167  
168 -**__Add APP EUI in the application:__**
153 +Add APP EUI in the application
169 169  
155 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image003.png]]
170 170  
171 -[[image:1664501711466-918.png]]
157 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image004.png]]
172 172  
173 173  
160 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image005.png]]
174 174  
175 -[[image:1664501721248-725.png]]
176 176  
177 177  
178 -[[image:1664501734705-405.png]]
164 +Add APP KEY and DEV EUI
179 179  
166 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image006.png]]
180 180  
181 181  
182 -**__Add APP KEY and DEV EUI:__**
183 183  
184 184  
185 -[[image:1664501784668-703.png]]
171 +**(% style="color:blue" %)Step 2**:(%%) Power on TrackerD by using the on board switch.
186 186  
187 187  
174 +**(% style="color:blue" %)Step 3:**(%%) TrackerD will auto join to the LoRaWAN network. After join success, TrackerD will start to upload message to IoT server.
188 188  
189 189  
190 -(% style="color:blue" %)**Step 2**:(%%) Power on TrackerD by using the on board switch.
177 +**(% style="color:blue" %)Positioning Mode(SMOD):**
191 191  
179 +* **GPS ONLY(Factory Settings): **only get GPS location info.
180 +* **BLE ONLY: **Only obtain iBeacon info via BLE. Design for Indoor tracking.
181 +* **GPS/BLE Hybrid: **Combination for Indoor and Outdoor tracking.
192 192  
193 -(% style="color:blue" %)**Step 3:**(%%) TrackerD will auto join to the LoRaWAN network. After join success, TrackerD will start to upload message to IoT server.
183 +User can switch modes by [[changing SMOD>>path:#Positioning_Mode]].
194 194  
195 195  
196 -(% style="color:blue" %)**Positioning Mode(SMOD):**
186 +== 2.3 Uplink Payload ~-~-~-~-~-~-~-~-~-~-~-~-~-~- ==
197 197  
198 -* (% style="color:#037691" %)**GPS ONLY(Factory Settings):    **(%%)only get GPS location info.
199 -* (% style="color:#037691" %)**BLE ONLY:              **(%%)Only obtain iBeacon info via BLE. Design for Indoor tracking.
200 -* (% style="color:#037691" %)**GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.
201 201  
202 -User can switch modes by [[changing SMOD>>||anchor="H3.2.7SetPositioningMode"]].
189 +=== 2.3.1 Uplink FPORT=5, Device Status ===
203 203  
204 204  
205 205  
206 -== 2.3 Uplink Payload ==
193 +=== 2.3.2 Uplink FPORT= , Realtime GNSS Positioning ===
207 207  
195 +The default uplink payload includes totally 11 bytes. (User can use AT+MOD=0 to enable the Temperature and humidity sensor to hum/tem info from accelerometer. When accelerometer info is enable, total payload will be 15 bytes, please note 15 bytes won’t work on DR0 on US915/AU915 frequency band. )
208 208  
209 -=== 2.3.1 Uplink FPORT~=5, Device Status ===
210 210  
198 +|(((
199 +**Size**
211 211  
201 +**(bytes)**
202 +)))|4|4|2|1|(((
203 +2
212 212  
213 -=== 2.3.2 Uplink FPORT~= , Realtime GNSS Positioning ===
205 +(optional )
206 +)))|(((
207 +2
214 214  
215 -
216 -The default uplink payload includes totally 11 bytes. (User can use AT+MOD=0 to enable the Temperature and humidity sensor to hum/tem info from accelerometer. When accelerometer info is enable, total payload will be 15 bytes, please note 15 bytes won't work on DR0 on US915/AU915 frequency band. )
217 -
218 -
219 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:480px" %)
220 -|=(% scope="row" style="width: 50px;" %)(((
221 -**Size(bytes)**
222 -)))|(% style="width:60px" %)4|(% style="width:70px" %)4|(% style="width:80px" %)2|(% style="width:50px" %)1|(% style="width:88px" %)(((
223 -2(optional)
224 -)))|(% style="width:87px" %)(((
225 -2(optional)
209 +(optional)
226 226  )))
227 -|=(% style="width: 69px;" %)**Value**|(% style="width:76px" %)[[Latitude>>||anchor="HLocationinfo:"]]|(% style="width:87px" %)[[Longitude>>||anchor="HLocationinfo:"]]|(% style="width:76px" %)(((
228 -[[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
229 -)))|(% style="width:52px" %)[[FLAG>>||anchor="HFLAG:"]]|(% style="width:88px" %)[[Hum>>||anchor="HHum:"]]|(% style="width:87px" %)[[Tem>>||anchor="HTem:"]]
211 +|**Value**|[[Latitude>>path:#Location]]|[[Longitude>>path:#Location]]|(((
212 +[[Alarm &>>path:#Alarm]]
230 230  
231 -[[image:1664501958445-288.png]]
214 +[[BAT>>path:#Alarm]]
215 +)))|[[FLAG>>path:#Flag]]|Hum|[[Tem>>path:#Pitch]]
232 232  
233 233  
234 -==== (% style="color:blue" %)**Alarm & BAT:**(%%) ====
218 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image007.png]]
235 235  
236 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:250px" %)
237 -|=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)1 bit|(% style="width:80px" %)1bit|(% style="width:50px" %)14bits
238 -|=(% style="width: 72px;" %)**Value**|(% style="width:67px" %)reserve|(% style="width:118px" %)Alarm Indicate|(% style="width:63px" %)[[BAT>>||anchor="HBAT:"]] 
239 239  
221 +**Alarm & BAT:**
240 240  
241 -==== (% style="color:blue" %)**FLAG:**(%%) ====
223 +|**Size(bit)**|1 bit|1bit|14 bits
224 +|**Value**|reserve|Alarm Indicate|[[BAT>>path:#BAT]]
242 242  
243 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:250px" %)
244 -|=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)2bits|(% style="width:50px" %)1bit|(% style="width:100px" %)5 bits
245 -|=(% style="width: 79px;" %)**Value**|(% style="width:55px" %)[[MOD>>||anchor="H3.2.7SetPositioningMode"]]|(% style="width:47px" %)[[LON>>||anchor="HLON:"]]|(% style="width:140px" %)Firmware version 
226 +**FLAG:**
246 246  
247 -**Example:** Payload: 0x02863D68 FAC29BAF 4B45 60 0202 011A 
228 +|**Size(bit)**|2 bits|1bit|5 bits
229 +|**Value**|[[MOD>>path:#MD]]|[[LON>>path:#LON]]|Firmware version
248 248  
249 249  
250 -==== (% style="color:blue" %)**Location info:**(%%) ====
251 251  
252 -* Latitude: 02863D68  ⇒  //if (0x//02863D68//& 0x80000000 = 0 )~://  //value = 02863D68 /1000000 = 42.351976//
253 -* Longitude: FAC29BAF  ⇒ //if (0x//FAC29BAF// & 0x80000000 = 1 )~://  //value = (0x//FAC29BAF// – 0x 100000000)/1000000 =//-87.9094//57//
233 +**Example: Payload: 0x02863D68 FAC29BAF 4B45 60 0202 011A **
254 254  
255 255  
256 -(% style="color:red" %)**Important note:**
236 +**Location info:**
257 257  
258 -1.  When power is low (<2.84v), GPS won't be able to get location info and GPS feature will be disabled and the location field will be filled with 0x0FFFFFFF, 0x0FFFFFFF.
238 +* Latitude: 02863D68⇒ //if (0x//02863D68//& 0x80000000 = 0 )~://
259 259  
260 -2.  In firmware version v1.5, Roll & Pitch is disabled by default.
240 +//value = 02863D68 /1000000 = 42.351976//
261 261  
262 -3.  When enable 9-axis motion sensor, the total payload will be 15 bytes, while US915/AU915 DR0 accept only 11 bytes payload. In this case, the payload on server will be ignore and shows as below:
242 +* Longitude: FAC29BAF ⇒ //if (0x//FAC29BAF// & 0x80000000 = 1 )~://
263 263  
244 +//value = (0x//FAC29BAF// – 0x 100000000)/1000000 =//-87.9094//57//
264 264  
265 -[[image:1664502116362-706.png]]
266 266  
247 +Important note:
267 267  
249 +1. When power is low (<2.84v), GPS won’t be able to get location info and GPS feature will be disabled and the location field will be filled with 0x0FFFFFFF, 0x0FFFFFFF.
250 +1. In firmware version v1.5, Roll & Pitch is disabled by default.
251 +1. When enable 9-axis motion sensor, the total payload will be 15 bytes, while US915/AU915 DR0 accept only 11 bytes payload. In this case, the payload on server will be ignore and shows as below:
268 268  
269 -4.  While GPS can't get location info after timeout(FTIME Parameter), the latitude and longitude will be filled with all 0x00:
253 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image008.png]]
270 270  
271 -[[image:1664502166010-515.png]]
272 272  
256 +1. While GPS can’t get location info after timeout(FTIME Parameter), the latitude and longitude will be filled with all 0x00:
273 273  
258 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image009.png]]
274 274  
275 -==== (% style="color:blue" %)**Alarm:**(%%) ====
260 +* **Alarm**: Example: 0x4B & 0x40 >> 6 = 0x01
261 +* **BAT**: Example: 0x0CDD & 0x3FFF ⇒ 3293 (mV).
276 276  
277 -Example:  0x4B & 0x40 >> 6 = 0x01
263 +The battery info shows the current voltage, for **TrackerD** version which powered by li-on battery. User can use below mapping to indicate the battery in percentage: \
278 278  
279 279  
280 -==== (% style="color:blue" %)**BAT:**(%%) ====
266 +* > 4.0v : 80% ~~ 100%
267 +* 3.85v ~~3.99v: 60% ~~ 80%
268 +* 3.70v ~~ 3.84v: 40% ~~ 60%
269 +* 3.40v ~~ 3.69v: 20% ~~ 40%
270 +* < 3.39v: 0~~20%
281 281  
282 -Example:  0x0CDD & 0x3FFF ⇒ 3293 (mV).
283 283  
284 -(((
285 -The battery info shows the current voltage, for (% style="color:blue" %)**TrackerD**(%%) version which powered by li-on battery. User can use below mapping to indicate the battery in percentage: \
286 -)))
273 +* **LON: **Enable/Disable LED activity for uplink
287 287  
288 -* > 4.0v :  80% ~~ 100%
289 -* 3.85v ~~3.99v:  60% ~~ 80%
290 -* 3.70v ~~ 3.84v:  40% ~~ 60%
291 -* 3.40v ~~ 3.69v:  20% ~~ 40%
292 -* < 3.39v:  0~~20%
275 +0x00: Disable LED indicator.
293 293  
277 +0x01: Enable LED indicator (Default Value)
294 294  
295 295  
296 -==== (% style="color:blue" %)**LON:**(%%) ====
280 +* **Hum**: 0202 = //if (0x0202 & 0x8000 = 0 ): value =// 0x0202 / 100 = +514 ⇒ 51.4 degree
281 +* **//Tem//**//: 011A =if (0x011A & 0x8000 = 1 ): value =( 0x011A - 0x10000)/10(dec) ⇒ -//28.2 degree
297 297  
298 298  
299 -Enable/Disable LED activity for uplink
300 300  
301 -(((
302 -0x00:  Disable LED indicator.
303 -)))
285 +=== 2.3.3 Uplink FPORT= , History GNSS Positioning ===
304 304  
305 -(((
306 -0x01:  Enable LED indicator (Default Value)
307 -)))
308 308  
309 309  
310 -==== (% style="color:blue" %)**Hum:**(%%) ====
289 +=== 2.3.4 BLE positioning Payload(Fport=2) ===
311 311  
312 -0202 = //if (0x0202 & 0x8000 = 0 ):  value =// 0x0202 / 100 = +514 ⇒ 51.4 degree
291 +Different MODE has different payload:
313 313  
293 +**MODE=2**
314 314  
315 -==== (% style="color:blue" %)**Tem:**(%%) ====
295 +|(((
296 +**Size**
316 316  
317 -011A =if (0x011A & 0x8000 = 1 ):  value =( 0x011A - 0x10000)/10(dec) ⇒ -//28.2 degree//
298 +**(bytes)**
299 +)))|16|4|4|2|4|2|1
300 +|**Value**|[[UUID>>path:#Location]]|(((
301 +iBeacon
318 318  
303 +MAJOR
304 +)))|(((
305 +iBeacon
319 319  
307 +MINOR
308 +)))|(((
309 +iBeacon Measured
320 320  
321 -=== 2.3.3 Uplink FPORT~= , History GNSS Positioning ===
311 +Power
312 +)))|(((
313 +iBeacon
322 322  
315 +RSSI
316 +)))|(((
317 +[[Alarm &>>path:#Alarm]]
323 323  
319 +[[BAT>>path:#Alarm]]
320 +)))|[[FLAG>>path:#Flag]]
324 324  
325 -=== 2.3.4 BLE positioning Payload(Fport2) ===
326 326  
323 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image010.png]]
327 327  
328 -Different MODE has different payload:  (% style="color:blue" %)**MODE=2**
329 329  
330 -(% border="1.5" cellspacing="3" style="background-color:#ffffcc; color:green; width:450px" %)
331 -|=(% scope="row" style="width: 60px;" %)(((
332 -**Size(bytes)**
333 -)))|(% style="width:30px" %)16|(% style="width:50px" %)4|(% style="width:50px" %)4|(% style="width:120px" %)2|(% style="width:50px" %)4|(% style="width:50px" %)2|(% style="width:30px" %)1
334 -|=(% style="width: 50px;" %)**Value**|(% style="width:44px" %)[[UUID>>||anchor="HLocationinfo:"]]|(% style="width:61px" %)(((
335 -iBeacon MAJOR
336 -)))|(% style="width:63px" %)(((
337 -iBeacon MINOR
338 -)))|(% style="width:71px" %)(((
339 -iBeacon Measured Power
340 -)))|(% style="width:50px" %)(((
341 -iBeacon RSSI
342 -)))|(% style="width:47px" %)(((
343 -[[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
344 -)))|(% style="width:15px" %)[[FLAG>>||anchor="HFLAG:"]]
326 +* **BAT**: Ex1: 0x4B45 & 0x3FFF ⇒ 3901 (mV).
327 +* **MODE: **Define the payload format.
328 +* **UUID: **The uuid from the strongest iBeacon.
329 +* **MAJOR**: The MAJOR from the strongest iBeacon.
330 +* **MINOR**: The MAJOR from the strongest iBeacon.
331 +* **Measured** **Power**: The Measured Power from the strongest iBeacon.
332 +* **RSSI**: The RSSI from the strongest iBeacon.
345 345  
346 -[[image:1664502425687-834.png]]
347 347  
348 348  
349 -* (% style="color:#037691" %)**BAT: ** (%%) Ex1: 0x4B45 & 0x3FFF ⇒ 3901 (mV).
350 -* (% style="color:#037691" %)**MODE:   **(%%)Define the payload format.
351 -* (% style="color:#037691" %)**UUID:     **(%%)The uuid from the strongest iBeacon.
352 -* (% style="color:#037691" %)**MAJOR:** (%%) The MAJOR from the strongest iBeacon.
353 -* (% style="color:#037691" %)**MINOR:**  (%%)The MAJOR from the strongest iBeacon.
354 -* (% style="color:#037691" %)**Measured Power: ** (%%) The Measured Power from the strongest iBeacon.
355 -* (% style="color:#037691" %)**RSSI:  ** (%%) The RSSI from the strongest iBeacon.
356 -
357 -
358 -
359 359  === 2.3.5 Add Payload format in TTN V3 ===
360 360  
361 -
362 362  In TTN V3, use can add a custom payload so it shows friendly.
363 363  
364 -In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**
340 +In the page Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder
365 365  
342 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image011.png]]
366 366  
367 -[[image:1664502649601-895.png]]
368 -
369 -
370 370  Add the decoder from this link:
371 371  
372 372  
373 373  Save the change the uplink message will be parsed. As below:
374 374  
375 -[[image:1664502676891-606.png]]
349 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image012.png]]
376 376  
377 377  
378 378  
353 +
354 +
379 379  == 2.4 Integrate with Datacake ==
380 380  
381 381  
382 -(((
383 383  After TrackerD sends data to LoRaWAN server such as TTN, use can pass the data to Datacake and plot out, currently only support GPS plot.
384 -)))
385 385  
386 -(((
387 -Instruction is here:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20Data%20Cake/#H7.Example~~-~~-AddTrackerDGPSTrackingInDataCake>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20Data%20Cake/#H7.Example--AddTrackerDGPSTrackingInDataCake]]
388 -)))
360 +Instruction is here: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20Data%20Cake/#H7.Example~~-~~-AddTrackerDGPSTrackingInDataCake>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20Data%20Cake/#H7.Example--AddTrackerDGPSTrackingInDataCake]]
389 389  
362 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image013.png]]
390 390  
391 -[[image:1664502695771-538.png]]
392 392  
393 -
394 -
395 395  == 2.5 Integrate with Tago ==
396 396  
397 397  
398 -(((
399 399  After TrackerD sends data to LoRaWAN server such as TTN, use can pass the data to Datacake and plot out, currently only support GPS plot.
400 -)))
401 401  
402 -(((
403 403  Instruction is here: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Tago.IO/#H3.A0Example-CreateTrackerD2FLGT92positioningwidget>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Tago.IO/#H3.A0Example-CreateTrackerD2FLGT92positioningwidget]]
404 -)))
405 405  
372 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image014.png]]
406 406  
407 -[[image:1664502715371-321.png]]
408 408  
409 409  
410 410  
... ... @@ -411,262 +411,241 @@
411 411  == 2.6 Alarm Mode ==
412 412  
413 413  
414 -(((
415 -User can push the (% style="color:red" %)**RED button**(%%) by more than 5 seconds to enter Alarm Mode.
416 -)))
380 +User can push the **RED button** by more than 5 seconds to enter Alarm Mode.
417 417  
418 418  
419 -(((
420 -Once enter Alarm mode, the (% style="color:green" %)**GREEN LED**(%%) will flash 3 times, the buzzer will alarm for 5 seconds, then TrackerD will immediately send a packet without location info and then send a data packet with GPS positioning information. After that, the device will send 60 packets at 1-minute intervals. The Alarm flag in the payload will be set for the next 60 packets unless exit alert mode.
421 -)))
383 +Once enter Alarm mode, the **GREEN LED** will flash 3 times, the buzzer will alarm for 5 seconds, then TrackerD will immediately send a packet without location info and then send a data packet with GPS positioning information. After that, the device will send 60 packets at 1-minute intervals. The Alarm flag in the payload will be set for the next 60 packets unless exit alert mode.
422 422  
423 423  
424 -(((
425 425  Two ways to exit alarm mode:
426 -)))
427 427  
428 428  * Server send a downlink command to exit.
429 429  * User fast press the RED button 10 times.
430 430  
431 -(((
432 -When exit alarm mode, (% style="color:red" %)**RED LED**(%%) will light up for 5 seconds, indicating that the alarm mode is exited. And the alert flag will be set to false.
433 -)))
391 +When exit alarm mode, **RED LED** will light up for 5 seconds, indicating that the alarm mode is exited. And the alert flag will be set to false.
434 434  
435 435  
394 +== 2.7 Sports Mode ~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-- ==
436 436  
437 -== 2.7 Sports Mode ==
438 438  
439 439  
440 -
441 441  == 2.8 LED Status ==
442 442  
443 443  
444 -(% border="1.5" style="background-color:#ffffcc; color:green; width:500px" %)
445 -|=(% style="width: 150px;" %)**Event**|=(% style="width: 200px;" %)**Action**|=(% style="width: 150px;" %)**AT+LON to control on/off**
446 -|(% style="width:157px" %)**Power On**|(% style="width:271px" %)(% style="color:blue" %)**BLUE, **(% style="color:red" %)**RED , **(% style="color:green" %)**Green** flash once|(% style="width:202px" %)N/A
447 -|(% style="width:157px" %)**Join request**|(% style="width:271px" %)(% style="color:green" %)**Green** (%%)led fast blink once (200ms)|(% style="width:202px" %)Yes
448 -|(% style="width:157px" %)**Join Success**|(% style="width:271px" %)(% style="color:green" %)**Green**(%%) led on 5 second|(% style="width:202px" %)N/A
449 -|(% style="width:157px" %)**Fixing Location**|(% style="width:271px" %)(% style="color:blue" %)**BLUE **(%%)blinks 200ms per second|(% style="width:202px" %)Yes
450 -|(% style="width:157px" %)**Fixed and uplink**|(% style="width:271px" %)(% style="color:green" %)**GREEN ***(%%)***blinks twice (200ms per blink)**|(% style="width:202px" %)Yes
451 -|(% style="width:157px" %)**Fail Fix and uplink**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)blinks twice (200ms per blink)|(% style="width:202px" %)Yes
452 -|(% style="width:157px" %)**Enter Alarm mode**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)on for 3 seconds|(% style="width:202px" %)Yes
453 -|(% style="width:157px" %)**Uplink under Alarm**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)on for 1 second|(% style="width:202px" %)Yes
454 -|(% style="width:157px" %)**Exit Alarm**|(% style="width:271px" %)(% style="color:blue" %)**BLUE **(%%)led on 5 second|(% style="width:202px" %)Yes
455 -|(% style="width:157px" %)**Get Downlink**|(% style="width:271px" %)(% style="color:green" %)**GREEN**(%%) led on 1 second|(% style="width:202px" %)Yes
456 -|(% style="width:157px" %)**Movement Detect**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)led on 500ms|(% style="width:202px" %)N/A
401 +|**Event**|**Action**|**AT+LON to control on/off**
402 +|**Power On**|**BLUE, RED , Green** flash once|N/A
403 +|**Join request**|**Green** led fast blink once (200ms)|Yes
404 +|**Join Success**|**Green** led on 5 second|N/A
405 +|**Fixing Location**|**BLUE **blinks 200ms per second|Yes
406 +|**Fixed and uplink**|**GREEN **blinks twice (200ms per blink)|Yes
407 +|**Fail Fix and uplink**|**RED **blinks twice (200ms per blink)|Yes
408 +|**Enter Alarm mode**|**RED **on for 3 seconds|Yes
409 +|**Uplink under Alarm**|**RED **on for 1 second|Yes
410 +|**Exit Alarm**|**BLUE **led on 5 second|Yes
411 +|**Get Downlink**|**GREEN** led on 1 second|Yes
412 +|**Movement Detect**|**RED **on 500ms|N/A
457 457  
458 458  
459 -== 2.9 Button Function ==
460 460  
461 461  
462 -(% style="color:blue" %)**RESET button:**
463 463  
464 -[[image:1664502835802-546.png]]
418 +== 2.9 Button Function ==
465 465  
420 +**RESET button:**
421 +
422 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image015.png]]
423 +
466 466  Push this button will reboot the device. Device will exit alarm mode and re-join to LoRaWAN server.
467 467  
468 468  
469 -(% style="color:red" %)**RED button:**
427 +**RED button:**
470 470  
471 -[[image:1664502854406-763.png]]
429 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image016.png]]
472 472  
431 +|**Function**|**Action**|**Description**
432 +|Send Alarm|Keep Pressing **RED** button for more than 5 seconds|Enter Alarm Mode.  See [[Alarm Mode>>path:#Alarm_Mode]]
433 +|Exit Alarm Mode|Fast press the **RED** button 10 times|Exit Alarm Mode
434 +|Enter Deep Sleep Mode|Press and hold the button for 10 seconds, then quickly press the device 3 times to enter deep sleep|This is the mode ship out from factory. CPU will be complete in sleep mode and no LoRa activity, only use before deploy.
473 473  
474 -(% border="1.5" style="background-color:#ffffcc; color:green; width:520px" %)
475 -|=(% style="width: 100px;" %)**Function**|=(% style="width: 210px;" %)**Action**|=(% style="width: 210px;" %)**Description**
476 -|(% style="width:135px" %)Send Alarm|(% style="width:220px" %)Keep Pressing (% style="color:red" %)**RED**(%%) button for more than 5 seconds|(% style="width:265px" %)Enter Alarm Mode.  See [[Alarm Mode>>||anchor="H2.6AlarmMode"]]
477 -|(% style="width:135px" %)Exit Alarm Mode|(% style="width:220px" %)Fast press the (% style="color:red" %)**RED** (%%)button 10 times|(% style="width:265px" %)Exit Alarm Mode
478 -|(% style="width:135px" %)Enter Deep Sleep Mode|(% style="width:220px" %)Press and hold the button for 10 seconds, then quickly press the device 3 times to enter deep sleep|(% style="width:265px" %)This is the mode ship out from factory. CPU will be complete in sleep mode and no LoRa activity, only use before deploy.
479 479  
480 480  
438 +
481 481  == 2.10 USB Port Function ==
482 482  
483 -
484 484  The USB interface of TrackerD has below functions:
485 485  
486 486  * Power on the device
487 487  * Recharge the battery
488 -* [[Configure Device>>||anchor="H3.ConfigureTrackerDviaATcommandorLoRaWANdownlink"]]
489 -* [[Upgrade Firmware>>||anchor="H5.UploadFirmware"]]
445 +* [[Configure Device>>path:#AT_Command]]
446 +* [[Upgrade Firmware>>path:#upgrade_image]]
490 490  
491 491  
492 492  
450 +
451 +
493 493  = 3. Configure TrackerD via AT command or LoRaWAN downlink =
494 494  
495 495  
496 496  User can configure TrackerD via AT Command or LoRaWAN Downlink.
497 497  
498 -LoRaWAN Downlink instruction for different platforms:  [[IoT LoRaWAN Server>>doc:Main.WebHome]]
457 +LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>url:http://wiki.dragino.com/xwiki/bin/view/Main/]]
499 499  
500 500  
501 -
502 502  == 3.1 Access AT Command ==
503 503  
462 +TrackerD supports the AT command set in stock firmware. User can connect to TrackerD with TYPE-C cable to use AT commands as shown below. ...
504 504  
505 -TrackerD supports the AT command set in stock firmware. User can connect to TrackerD with TYPE-C cable to use AT commands as shown below.
464 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image017.png]]
506 506  
507 507  
508 -[[image:1664502999401-486.png]]
467 +In PC, User needs to set serial tool baud rate to **115200** to access serial console for TrackerD. TrackerD will output system info once power on and user will be able to send AT commands:
509 509  
510 510  
511 -In PC, User needs to set serial tool baud rate to (% style="color:green" %)**115200**(%%) to access serial console for TrackerD. TrackerD will output system info once power on and user will be able to send AT commands:
470 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image018.png]]
512 512  
513 513  
514 -[[image:1664503022490-662.png]]
515 515  
474 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image019.png]]
516 516  
476 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]
517 517  
518 -[[image:1664503035713-500.png]]
519 519  
520 -
521 -
522 -[[image:1664503047675-651.png]]
523 -
524 -
525 -
526 526  == 3.2 Command Set ==
527 527  
528 528  
529 529  === 3.2.1 Set Transmit Interval ===
530 530  
531 -
532 532  Set device uplink interval.
533 533  
534 -* (% style="color:blue" %)**AT Command:**
486 +* AT Command:
535 535  
536 -(% style="color:#037691" %)**AT+TDC=xxx **
488 +AT+TDC=xxx
537 537  
538 -Example:  AT+TDC=300000. Means set interval to 5 minutes(300 seconds)
490 +Example: AT+TDC=300000. Means set interval to 5 minutes(300 seconds)
539 539  
540 540  
541 -* (% style="color:blue" %)**Downlink Payload (prefix 0x01):**
493 +* Downlink Payload (prefix 0x01):
542 542  
543 -(% style="color:#037691" %)**0x01 00 01 2C**  (%%) ~/~/  Same as AT+TDC=300000
495 +0x01 00 01 2C     ~/~/ Same as AT+TDC=300000
544 544  
545 545  
546 -
547 547  === 3.2.2 Set Alarm Packet transmission interval ===
548 548  
549 -
550 550  Set alarm packet transmit interval
551 551  
552 -* (% style="color:blue" %)**AT Command:**
502 +* AT Command:
553 553  
554 -(% style="color:#037691" %)**AT+ATDC=xx. **
504 +AT+ATDC=xx.
555 555  
556 -Example:  AT+ATDC=60000  **~-~->    ** Set Alarm Packet Interval to 60 seconds. TrackerD will send every 60 seconds in Alarm mode, Default Value: 60000
506 +Example: AT+ATDC=60000  à Set Alarm Packet Interval to 60 seconds. TrackerD will send every 60 seconds in Alarm mode, Default Value: 60000
557 557  
558 558  
559 -* (% style="color:blue" %)**Downlink Payload (prefix 0xB1):**
509 +* Downlink Payload (prefix 0xB1):
560 560  
561 -(% style="color:#037691" %)**0xB1 00 00 3C ** (%%) ~/~/  Same as AT+ATDC=60000
511 +0xB1 00 00 3C    ~/~/Same as AT+ATDC=60000
562 562  
563 563  
514 +=== 3.3.3 Set Sports Mode Packet transmission interval ===
564 564  
565 -=== 3.2.3 Set Sports Mode Packet transmission interval ===
566 -
567 -
568 568  Set sports packet transmit interval
569 569  
570 -* (% style="color:blue" %)**AT Command:**
518 +* AT Command:
571 571  
572 -(% style="color:#037691" %)**AT+MTDC=xx. **
520 +AT+MTDC=xx.
573 573  
574 -Example:  AT+MTDC=300000  **~-~->    ** Set Sports Mode Packet Interval to 300 seconds. TrackerD will send every 300 seconds in Sports mode, Default Value: 300000
522 + Example: AT+MTDC=300000  à Set Sports Mode Packet Interval to 300 seconds. TrackerD will send every 300 seconds in Sports mode, Default Value: 300000
575 575  
576 576  
577 -* (% style="color:blue" %)**Downlink Payload (prefix 0x03):**
525 +* Downlink Payload (prefix 0x03):
578 578  
579 -(% style="color:#037691" %)**0x03 00 01 2C**  (%%) ~/~/  Same as AT+ MTDC=3000000
527 +0x03 00 01 2C    ~/~/Same as AT+ MTDC=3000000
580 580  
581 581  
582 582  
583 -=== 3.2.4 Exit Alarm ===
531 +=== 3.3.4 Exit Alarm ===
584 584  
585 -
586 586  Server send downlink command to exit Alarm mode
587 587  
588 -* (% style="color:blue" %)**AT Command: No AT Command**
535 +* AT Command:
589 589  
590 -* (% style="color:blue" %)**Downlink Payload (prefix 0x02):**
537 +No AT Command
591 591  
592 -(% style="color:#037691" %)**0x02 01**    (%%) ~/~/  Exit Alarm Mode
593 593  
540 +* Downlink Payload (prefix 0x02):
594 594  
542 +0x02 01     ~/~/ Exit Alarm Mode
595 595  
596 -=== 3.2.5 Disable/Enable LED flash ===
597 597  
545 +=== 3.3.5 Disable/Enable LED flash ===
598 598  
599 599  Disable/Enable LED for position, downlink and uplink
600 600  
601 -* (% style="color:blue" %)**AT Command:**
549 +* AT Command:
602 602  
603 -(% style="color:#037691" %)**AT+LON=xx.  (Disable (0), Enable (1), default:1)**
551 +AT+LON=xx.  (Disable (0), Enable (1), default:1)
604 604  
605 -Example: AT+LON=0  **~-~-> ** Disable LED for position, downlink and uplink.
553 + Example: AT+LON=0 à Disable LED for position, downlink and uplink.
606 606  
607 607  
608 -* (% style="color:blue" %)**Downlink Payload (prefix 0xAE):**
556 +* Downlink Payload (prefix 0xAE):
609 609  
610 -(% style="color:#037691" %)**0xAE 00 ** (%%) ~/~/  Same as AT+LON=0
558 +0xAE 00    ~/~/Same as AT+LON=0
611 611  
612 612  
613 613  
614 -=== 3.2.6 Disable/Enable movement detect (Debug Only) ===
615 615  
563 +=== 3.3.6 Disable/Enable movement detect (Debug Only) ===
616 616  
617 617  User can use this feature to check and set thread hole of movement detect
618 618  
619 -* (% style="color:blue" %)**AT Command:**
567 +* AT Command:
620 620  
621 -(% style="color:#037691" %)**AT+INTWK=xx.  (Disable (0), Enable (1), default:0)**
569 +AT+INTWK=xx.  (Disable (0), Enable (1), default:0)
622 622  
623 -Example:  AT+ INTWK =1  **~-~->   ** Enable detect movement.
571 + Example: AT+ INTWK =1 à Enable detect movement.
624 624  
625 625  
626 -* (% style="color:blue" %)**Downlink Payload (prefix 0xAF):**
574 +* Downlink Payload (prefix 0xAF):
627 627  
628 -(% style="color:#037691" %)**0xAF 01 ** (%%) ~/~/  Same as AT+ INTWK =1
576 +0xAF 01    ~/~/Same as AT+ INTWK =1
629 629  
630 630  
631 631  
632 -=== 3.2.7 Set Positioning Mode ===
580 +=== 3.3.7 Set Positioning Mode ===
633 633  
634 -
635 635  SMOD define the how TrackerD scan and uplink date.
636 636  
637 -GPS室外定位模式：  设备默认模式，设备入网后会发送device当前模式下的信息，随后立即定位发送数据包（默认是3分钟定位，超过将发送无效数据），如果出现意外情况下，快速按键3下，将会发出报警消息（默认每分钟发送一次）。GPS还有一种logdata模式，在断网的情况下将数据存储下来，等到有网的时候，一次将数据以每10秒上报。
584 +GPS室外定位模式：设备默认模式，设备入网后会发送device当前模式下的信息，随后立即定位发送数据包（默认是3分钟定位，超过将发送无效数据），如果出现意外情况下，快速按键3下，将会发出报警消息（默认每分钟发送一次）。GPS还有一种logdata模式，在断网的情况下将数据存储下来，等到有网的时候，一次将数据以每10秒上报。
638 638  
639 -BLE室内定位模式：  设备入网后会发送device当前模式下的信息，随后立即定位发送数据包（默认是5秒，超过将发送无效数据），如果出现意外情况下，快速按键3下，将会发出报警消息（默认每3分钟发送一次）。
586 + BLE室内定位模式：设备入网后会发送device当前模式下的信息，随后立即定位发送数据包（默认是5秒，超过将发送无效数据），如果出现意外情况下，快速按键3下，将会发出报警消息（默认每3分钟发送一次）。
640 640  
641 -GPS和BLE混动模式：设备入网后会发送device当前模式下的信息，随后立即判断是否在室内，如果是就进行BLE定位，不是就GPS定位。如果出现意外情况下，快速按键3下，将会发出报警消息（默认每分钟发送一次）。
588 + GPS和BLE混动模式：设备入网后会发送device当前模式下的信息，随后立即判断是否在室内，如果是就进行BLE定位，不是就GPS定位。如果出现意外情况下，快速按键3下，将会发出报警消息（默认每分钟发送一次）。
642 642  
643 -运动模式：  设备入网后会发送device当前模式下的信息，随后发送GPS定位数据，设备判断是否在运动，没有运动传感器没有检测到动作，立即进入静止状态（默认20分钟），如果产生运动，将每5分钟发送一次数据，再第五分钟后检测设备有误运动，无将切换到静止状态，有立即发送数据。
590 +运动模式：设备入网后会发送device当前模式下的信息，随后发送GPS定位数据，设备判断是否在运动，没有运动传感器没有检测到动作，立即进入静止状态（默认20分钟），如果产生运动，将每5分钟发送一次数据，再第五分钟后检测设备有误运动，无将切换到静止状态，有立即发送数据。
644 644  
645 645  
646 646  
647 -* (% style="color:blue" %)**AT Command:**
648 648  
649 -(% style="color:#037691" %)**AT+SMOD=xx. **
595 +* AT Command:
650 650  
597 +AT+SMOD=xx.
651 651  
652 - **Example:**
599 + Example:
653 653  
654 - AT+ SMOD =1,0  **~-~-> ** GPS+ BAT+ State+Tem&Hum
601 + AT+ SMOD =1,0    à GPS+ BAT+ State+Tem&Hum
655 655  
656 - AT+ SMOD =1,1    **~-~->**  GPS +BAT State
603 + AT+ SMOD =1,1    à GPS +BAT State
657 657  
658 - AT+ SMOD =2,3    **~-~->**  (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State。
605 + AT+ SMOD =2,3    à (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State。
659 659  
660 660  
661 -* (% style="color:blue" %)**Downlink Payload (prefix 0xA5):**
608 +* Downlink Payload (prefix 0xA5):
662 662  
663 -(% style="color:#037691" %)**0xA5 01 00**    (%%) ~/~/  Same as AT+ SMOD =1,0
610 +0xA5 01 00     ~/~/ Same as AT+ SMOD =1,0
664 664  
665 665  
613 +=== 3.3.8 Set MAX GPS position time ===
666 666  
667 -=== 3.2.8 Set MAX GPS position time ===
668 -
669 -
670 670  Set max positioning time, default is 150 seconds. TrackerD will try to get location info within this period. If fail to get position data within this time, TrackerD will use 000000 for latitude and longitude.
671 671  
672 672  
... ... @@ -673,60 +673,60 @@
673 673  If AT+FTIME=0. The GPS module will be always powered and positioning. This will highly increase the power consumption (up to 50mA). When AT+FTIME=0, it will improve fix accuracy and shorten the acquire time for next uplink.
674 674  
675 675  
676 -* (% style="color:blue" %)**AT Command:**
621 +* AT Command:
677 677  
678 -(% style="color:#037691" %)**AT+FTIME=xx**  (%%) **~-~-> ** Set to use xx as max fix time.
623 +AT+FTIME=xx  à Set to use xx as max fix time.
679 679  
680 -Example:  AT+FTIME=150
625 +Example: AT+FTIME=150
681 681  
682 682  
683 -* (% style="color:blue" %)**Downlink Payload (prefix 0xAA):**
628 +* Downlink Payload (prefix 0xAA):
684 684  
685 -(% style="color:#037691" %)**0xAA 00 96 ** (%%) ~/~/  Set AT+FTIME=150
630 +0xAA 00 96      ~/~/Set AT+FTIME=150
686 686  
687 687  
688 688  
634 +
689 689  === 3.3.9 Set PDOP value for GPS fix accuracy ===
690 690  
637 +PDOP(Position Dilution of Precision) filter, TrackerD will only accept GPS data with a lower PDOP value than pre-configure PDOP value. If device can’t get a valid GPS packet within FTIME timeout, it will use the GPS data with lowest PDOP value to server.
691 691  
692 -PDOP(Position Dilution of Precision) filter, TrackerD will only accept GPS data with a lower PDOP value than pre-configure PDOP value. If device can't get a valid GPS packet within FTIME timeout, it will use the GPS data with lowest PDOP value to server.
693 693  
694 -
695 695  A GPS packet with lower PDOP has higher accuracy. PDOP default value is 2.0
696 696  
697 697  
698 -* (% style="color:blue" %)**AT Command:**
643 +* AT Command:
699 699  
700 -(% style="color:#037691" %)**AT+PDOP=2.5 ** (%%) **~-~->  ** Set PDOP to 2.5
645 +AT+PDOP=2.5  à Set PDOP to 2.5
701 701  
702 702  
703 -* (% style="color:blue" %)**Downlink Payload (prefix 0xAD):**
648 +* Downlink Payload (prefix 0xAD):
704 704  
705 -(% style="color:#037691" %)**0xAD 00 0A**   (%%) ~/~/  Set AT+PDOP=1  (0x0A / 10 =1)
650 +0xAD 00 0A    ~/~/Set AT+PDOP=1    (0x0A / 10 =1)
706 706  
707 -(% style="color:#037691" %)**0xAD 00 19**   (%%) ~/~/  Set AT+PDOP=2.5    (0x19 / 10 =2.5)
652 +0xAD 00 19    ~/~/Set AT+PDOP=2.5    (0x19 / 10 =2.5)
708 708  
709 -(% style="color:#037691" %)**0xAD 00 46**    (%%) ~/~/  Set AT+PDOP=7  (0x46 / 10 =7)
654 +0xAD 00 46    ~/~/Set AT+PDOP=7     (0x46 / 10 =7)
710 710  
656 +Disable/Enable the confirmation mode
711 711  
658 +* AT Command:
712 712  
713 -Disable/Enable the confirmation mode
660 +AT+CFM=xx.
714 714  
715 -* (% style="color:blue" %)**AT Command:**
662 + Example:
716 716  
717 -(% style="color:#037691" %)**AT+CFM=xx. **
664 + AT+ CFM=0    à Disable confirmation
718 718  
666 + AT+ CFM=1    à Enable confirmation
719 719  
720 -**~ Example:**
721 721  
722 - AT+ CFM=0    **~-~->   ** Disable confirmation
669 +* Downlink Payload (prefix 0x05):
723 723  
724 - AT+ CFM=1    **~-~->  ** Enable confirmation
671 +0x05 01      ~/~/ Same as AT+ SMOD =1
725 725  
726 726  
727 -* (% style="color:blue" %)**Downlink Payload (prefix 0x05):**
728 728  
729 -(% style="color:#037691" %)**0x05 01 **(%%) ~/~/  Same as AT+ SMOD =1
730 730  
731 731  
732 732  
... ... @@ -739,39 +739,35 @@
739 739  
740 740  == 5.1 Firmware Change Log ==
741 741  
742 -
743 743  **[[See this link>>url:https://github.com/dragino/TrackerD]]**
744 744  
745 745  
746 -
747 747  == 5.2 How to upgrade firmware ==
748 748  
692 +User can use the TrackerD ’s USB port to upgrade firmware into it. The hardware connection for upgrade firmware is as below:
749 749  
750 -User can use the TrackerD's USB port to upgrade firmware into it. The hardware connection for upgrade firmware is as below:
751 751  
695 +**(% style="color:blue" %)Step1:  **(%%)Connect TrackerD and PC via USB cable shipped with TrackerD.
752 752  
753 -(% style="color:blue" %)**Step1:  **(%%)Connect TrackerD and PC via USB cable shipped with TrackerD.
697 +**(% style="color:blue" %)Step2:** (%%) Install CH9102 driver in the PC.
754 754  
755 -
756 -(% style="color:blue" %)**Step2:** (%%) Install CH9102 driver in the PC.
757 -
758 758  After installation of the driver and plug in TrackerD, user should be able to see com port in PC's device manager.
759 759  
760 760  
761 -(% style="color:blue" %)**Step3:  **(%%)Download and Install Flash Tool:  [[https:~~/~~/www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools>>url:https://www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools]]
702 +**(% style="color:blue" %)Step3：**(%%) Download and Install Flash Tool:
762 762  
704 +[[https:~~/~~/www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools>>url:https://www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools]]
763 763  
764 -(% style="color:blue" %)**Step4:** (%%) Run Flash Download Tool and configure chip type to ESP32
706 +**(% style="color:blue" %)Step4:** (%%) Run Flash Download Tool and configure chip type to ESP32
765 765  
766 766  
767 -[[image:1664503563660-578.png]]
709 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image021.png||alt="image-20220712083115-1.png"]]
768 768  
711 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image022.png||alt="image-20220712083115-2.png"]]
769 769  
770 -[[image:1664503574618-659.png]]
771 771  
714 +**(% style="color:blue" %)Step5:** (%%) Select the firmware file (.bin format), com port and proper SPI configure. Clink Start. Bin file location:
772 772  
773 -(% style="color:blue" %)**Step5:** (%%) Select the firmware file (.bin format), com port and proper SPI configure. Clink Start. Bin file location:
774 -
775 775  [[https:~~/~~/www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0>>url:https://www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0]]
776 776  
777 777  
... ... @@ -781,17 +781,16 @@
781 781  
782 782  ESP_LORA-eeprom-class.bin @ 0x10000
783 783  
725 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image023.png||alt="image-20220712083115-3.png"]]
784 784  
785 -[[image:1664503593459-435.png]]
727 +After upgrade finish, it will show finish as below:
786 786  
729 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image024.png||alt="image-20220712083115-4.png"]]
787 787  
788 788  
789 -After upgrade finish, it will show finish as below:
790 790  
791 -[[image:1664503611848-385.png]]
792 792  
793 793  
794 -
795 795  = 6. Developer Guide =
796 796  
797 797  
... ... @@ -801,26 +801,28 @@
801 801  === 6.1.1 Set up ARDUINO compile environment ===
802 802  
803 803  
804 -* **Download the latest Arduino software (IDE) from the Arduino official website:  [[https:~~/~~/www.arduino.cc/en/Main/Software>>url:https://www.arduino.cc/en/Main/Software]]**
744 +* Download the latest Arduino software (IDE) from the Arduino official website
805 805  
806 -Install IDE on PC, open and click (% style="color:#037691" %)**File ~-~-> Preference**,(%%) add the following URL:  [[https:~~/~~/dl.espressif.com/dl/package_esp32_index.json>>url:https://links.jianshu.com/go?to=https%3A%2F%2Fdl.espressif.com%2Fdl%2Fpackage_esp32_index.json]]
746 +[[https:~~/~~/www.arduino.cc/en/Main/Software>>url:https://www.arduino.cc/en/Main/Software]]
807 807  
748 +Install IDE on PC, open and click File ~-~-> Preference, add the following URL [[https:~~/~~/dl.espressif.com/dl/package_esp32_index.json>>url:https://links.jianshu.com/go?to=https%3A%2F%2Fdl.espressif.com%2Fdl%2Fpackage_esp32_index.json]]
808 808  
809 -[[image:1664503635019-941.png]]
750 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image025.png]]
810 810  
752 +* Go to tools ~-~-> Boards ~-~-> Boards Manager, find the esp32 information and install it.
811 811  
812 -* (% style="color:#037691" %)**Go to tools ~-~-> Boards ~-~-> Boards Manager**,(%%) **find the esp32 information and install it.**
754 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image026.png]]
813 813  
814 -[[image:1664503715811-892.png]]
815 815  
757 +* Download the latest TrackerD from the dragino github
816 816  
759 +[[https:~~/~~/github.com/dragino/TrackerD>>url:https://github.com/dragino/TrackerD]]
817 817  
818 -* **Download the latest TrackerD from the dragino github: [[https:~~/~~/github.com/dragino/TrackerD>>url:https://github.com/dragino/TrackerD]]**
819 819  
820 -Put the Library in the TrackerD directory into the libraries file in the Arduino directory:
762 +Put the Library in the TrackerD directory into the libraries file in the Arduino directory
821 821  
764 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image027.png]]
822 822  
823 -[[image:1664503752288-974.png]]
824 824  
825 825  
826 826  
... ... @@ -827,21 +827,21 @@
827 827  == 6.2 Source Code ==
828 828  
829 829  
830 -* (% style="color:blue" %)**Open the example in the TrackerD file, please select the correct port in the IDE, as shown below:**
772 +* Open the example in the TrackerD file, please select the correct port in the IDE, as shown below:
831 831  
832 -[[image:1664503794261-827.png]]
774 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image028.png]]
833 833  
776 +* Click to upload
834 834  
778 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image029.png]]
835 835  
836 -* (% style="color:blue" %)**Click to upload**
780 +* Check the result, if the upload is successful, as shown below, open the serial port to view the data
837 837  
838 -[[image:1664503808294-336.png]]
839 839  
783 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image030.png]] [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image031.png]]
840 840  
841 841  
842 -* (% style="color:blue" %)**Check the result, if the upload is successful, as shown below, open the serial port to view the data**
843 843  
844 -[[image:1664503824081-592.png]] [[image:1664503831430-500.png]]
845 845  
846 846  
847 847  
... ... @@ -848,10 +848,11 @@
848 848  = 7.  FAQ =
849 849  
850 850  
793 +
851 851  == 7.1 How to change the LoRa Frequency Bands/Region? ==
852 852  
853 853  
854 -User can follow the introduction for [[how to upgrade image>>||anchor="H5.UploadFirmware"]]. When download the images, choose the required image file for download.
797 +User can follow the introduction for [[how to upgrade image>>path:#upgrade_image]]. When download the images, choose the required image file for download.
855 855  
856 856  
857 857  
... ... @@ -862,8 +862,8 @@
862 862  
863 863  
864 864  
865 -(% border="1.5" cellspacing="3" style="background-color:#ffffcc; color:green; width:314px" %)
866 -|=(% style="width: 118px;" %)**Pin**|=(% style="width: 67px;" %)**Color**|=(% style="width: 123px;" %)**USB Pin**
808 +(% border="2" style="background-color:#ffffcc; color:green; width:314px" %)
809 +|(% style="width:118px" %)**Pin**|(% style="width:67px" %)**Color**|(% style="width:123px" %)**USB Pin**
867 867  |(% style="width:118px" %)A4,B4,A9,B9|(% style="width:67px" %)Red|(% style="width:123px" %)VCC
868 868  |(% style="width:118px" %)A7,B7|(% style="width:67px" %)White|(% style="width:123px" %)D- (N/A)
869 869  |(% style="width:118px" %)A6,B6|(% style="width:67px" %)Green|(% style="width:123px" %)D+(N/A)
... ... @@ -873,7 +873,6 @@
873 873  |(% style="width:118px" %)A8|(% style="width:67px" %)Yellow|(% style="width:123px" %)MTMS/GPIO14
874 874  |(% style="width:118px" %)B8|(% style="width:67px" %)Grey|(% style="width:123px" %)MTDO/GPIO15
875 875  
876 -
877 877  = 8.  Order Info =
878 878  
879 879  
... ... @@ -882,6 +882,7 @@
882 882  (% style="color:blue" %)**XXX**(%%): The default frequency band
883 883  
884 884  * (% style="color:red" %)**EU433**(%%): Default frequency band EU433
827 +* (% style="color:red" %)**CN470**(%%): Default frequency band CN470
885 885  * (% style="color:red" %)**EU868**(%%): Default frequency band EU868
886 886  * (% style="color:red" %)**IN865**(%%): Default frequency band IN865
887 887  * (% style="color:red" %)**KR920**(%%): Default frequency band KR920
... ... @@ -890,30 +890,32 @@
890 890  * (% style="color:red" %)**US915**(%%): Default frequency band US915
891 891  
892 892  
893 -
894 894  = 9.  Packing Info =
895 895  
896 896  
897 -(% style="color:#037691" %)**Package Includes**:
839 +**Package Includes**:
898 898  
899 -* TrackerD LoRaWAN GPS/BLE Tracker x 1
900 -* USB recharge & program cable x 1
841 +* TrackerD x 1
842 +* Rechargeable cable x 1
843 +* Program Cable x 1
901 901  
902 -(% style="color:#037691" %)**Dimensions and Weight**:
845 +**Dimensions and Weight**:
903 903  
904 -* Device Size: 85 x 48 x 15 cm
905 -* Weight: 50g
847 +* Device Size: 85 x 48 x 15 mm/pcs
848 +* Weight: 55g/pcs
906 906  
907 907  
908 908  
909 909  = 10. Support =
910 910  
911 -
912 912  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
913 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]].
855 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to
914 914  
857 +[[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]]
915 915  
916 916  
860 +
861 +
917 917  = 11.  Reference =
918 918  
919 919  
... ... @@ -920,5 +920,3 @@
920 920  * [[**Firmware in Bin format**>>https://www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0]]
921 921  * **[[Source Code>>https://github.com/dragino/TrackerD]] **
922 922  * [[**Hardware Source**>>https://www.dropbox.com/sh/orwoy6cecb89m4e/AAD37sRuUrvKsHgAJxuVTkB5a?dl=0]]
923 -
924 -
1664503794261-827.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -119.5 KB
Content
1664503808294-336.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -161.6 KB
Content
1664503824081-592.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -77.4 KB
Content
1664503831430-500.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -147.8 KB
Content
1664505654417-133.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -27.5 KB
Content