Skip to Content
Last modified by Xiaoling on 2025/04/27 16:48
From version 51.24
edited by Xiaoling
on 2022/09/30 15:07
Change comment: There is no comment for this version
To version 48.1
edited by Xiaoling
on 2022/09/30 10:10
Change comment: Uploaded new attachment "1664503808294-336.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -1,13 +7,6 @@
1 -(% style="text-align:center" %)
2 -[[image:1664505654417-133.png]]
3 -
4 -
5 -
6 -
7 7  (% class="wikigeneratedid" %)
8 8  **Table of Contents:**
9 9  
10 -{{toc/}}
11 11  
12 12  
13 13  
... ... @@ -14,10 +14,9 @@
14 14  
15 15  = 1.  Introduction =
16 16  
10 +== 1.1  OverView ==
17 17  
18 -== 1.1  What is TrackerD ==
19 19  
20 -
21 21  (((
22 22  TrackerD is an (% style="color:blue" %)**Open Source LoRaWAN Tracker**(%%) based on (% style="color:blue" %)**ESP32 MCU**(%%) and (% style="color:blue" %)**Semtech LoRa Wireless Chip**.
23 23  )))
... ... @@ -25,14 +25,10 @@
25 25  (((
26 26  In TrackerD, there are various sensors such as GPS, WiFi, BLE, Temperature, Humidity, Motion Detection, and Buzzer. User can use TrackerD for different tracking scenario.
27 27  
28 -(((
29 29  TrackerD is program friendly. Developers can use Arduino IDE to customize the software of TrackerD to fit their IoT solution.
30 -)))
31 31  
32 -(((
33 33  The LoRa wireless technology used in TrackerD allows the user to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional tracking services.
34 34  )))
35 -)))
36 36  
37 37  (((
38 38  TrackerD is equipped with a (% style="color:blue" %)**1000mAh Li-on rechargeable battery**(%%). Each TrackerD has a worldwide unique OTAA keys to join the LoRaWAN network.
... ... @@ -46,7 +46,6 @@
46 46  (% style="color:red" %)**Note: LoRaWAN server can be a general LoRaWAN server other than TTN.**
47 47  
48 48  
49 -
50 50  == 1.2 Specifications ==
51 51  
52 52  
... ... @@ -61,11 +61,13 @@
61 61  * EEPROM: 520 KB
62 62  * Clock Speed: 32Mhz
63 63  
51 +
64 64  (% style="color:blue" %)**Common DC Characteristics:**
65 65  
66 66  * Supply Voltage: 5V via USB port or Internal li-on battery
67 67  * Operating Temperature: -40 ~~ 60°C
68 68  
57 +
69 69  (% style="color:blue" %)**LoRa Spec:**
70 70  
71 71  * Frequency Range,
... ... @@ -87,10 +87,12 @@
87 87  * Packet engine up to 256 bytes with CRC.
88 88  * LoRaWAN 1.0.3 Specification
89 89  
79 +
90 90  (% style="color:blue" %)**Battery:**
91 91  
92 92  * 1000mA Li-on Battery power (for model TrackerD)
93 93  
84 +
94 94  (% style="color:blue" %)**Power Consumption**
95 95  
96 96  * Sleeping Mode: 200uA
... ... @@ -98,6 +98,8 @@
98 98  * Tracking: max: 38mA
99 99  
100 100  
92 +
93 +
101 101  == 1.3  Features ==
102 102  
103 103  
... ... @@ -104,7 +104,7 @@
104 104  * LoRaWAN 1.0.3 Class A
105 105  * ESP32 PICO D4
106 106  * SX1276/78 Wireless Chip
107 -** Arduino IDE Compatible
100 +* Arduino IDE Compatible
108 108  * Open source hardware / software
109 109  * Regular/ Real-time GPS,BLE,WIFI tracking
110 110  * Built-in3 axis accelerometer (LIS3DH)
... ... @@ -117,6 +117,7 @@
117 117  * Datalog
118 118  
119 119  
113 +
120 120  == 1.4  Applications ==
121 121  
122 122  
... ... @@ -124,9 +124,10 @@
124 124  * Human tracking
125 125  
126 126  
127 -= 2.1 Use TrackerD =
128 128  
129 129  
123 += 2.1 Use TrackerD =
124 +
130 130  == 2.1 How it works? ==
131 131  
132 132  
... ... @@ -133,251 +133,240 @@
133 133  TrackerD is configured as LoRaWAN OTAA Class A GPS tracker by default. It has OTAA keys to join LoRaWAN network. To connect a LoRaWAN network, user need to input the OTAA keys in the LoRaWAN IoT server and push reset button of TrackerD (next to USB port). TrackerD will wake up and auto join the network via OTAA.
134 134  
135 135  
136 -
137 137  == 2.2 Quick guide to connect to LoRaWAN server ==
138 138  
133 +Here is an example for how to join the [[TTNv3 LoRaWAN Network>>url:https://eu1.cloud.thethings.network]]. Below is the network structure, we use LPS8N as LoRaWAN gateway in this example.
139 139  
140 -Here is an example for how to join the [[TTNv3 LoRaWAN Network>>url:https://eu1.cloud.thethings.network]]. Below is the network structure, we use LPS8N as LoRaWAN gateway in this example. 
141 141  
136 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image001.png]]
142 142  
143 -[[image:1664501652064-326.png]]
144 144  
145 -
146 -
147 147  The LPS8N is already set to connect to [[TTN V3 network >>url:https://eu1.cloud.thethings.network/]]. What the rest need to is register this device in TTN V3:
148 148  
141 +**(% style="color:blue" %)Step 1**:(%%) Create a device in TTN V3 with the OTAA keys from TrackerD.
149 149  
150 -(% style="color:blue" %)**Step 1**:(%%) Create a device in TTN V3 with the OTAA keys from TrackerD.
151 -
152 152  Each TrackerD is shipped with a sticker with the default device EUI as below:
153 153  
145 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image002.png]]
154 154  
155 -[[image:1664501677253-891.png]]
156 156  
157 157  
149 +
158 158  Input these keys to their LoRaWAN Server portal. Below is TTN V3 screen shot:
159 159  
160 160  
161 -**__Add APP EUI in the application:__**
153 +Add APP EUI in the application
162 162  
155 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image003.png]]
163 163  
164 -[[image:1664501711466-918.png]]
157 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image004.png]]
165 165  
166 166  
160 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image005.png]]
167 167  
168 -[[image:1664501721248-725.png]]
169 169  
170 170  
171 -[[image:1664501734705-405.png]]
164 +Add APP KEY and DEV EUI
172 172  
166 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image006.png]]
173 173  
174 174  
175 -**__Add APP KEY and DEV EUI:__**
176 176  
177 177  
178 -[[image:1664501784668-703.png]]
171 +**(% style="color:blue" %)Step 2**:(%%) Power on TrackerD by using the on board switch.
179 179  
180 180  
174 +**(% style="color:blue" %)Step 3:**(%%) TrackerD will auto join to the LoRaWAN network. After join success, TrackerD will start to upload message to IoT server.
181 181  
182 182  
183 -(% style="color:blue" %)**Step 2**:(%%) Power on TrackerD by using the on board switch.
177 +**(% style="color:blue" %)Positioning Mode(SMOD):**
184 184  
179 +* **GPS ONLY(Factory Settings): **only get GPS location info.
180 +* **BLE ONLY: **Only obtain iBeacon info via BLE. Design for Indoor tracking.
181 +* **GPS/BLE Hybrid: **Combination for Indoor and Outdoor tracking.
185 185  
186 -(% style="color:blue" %)**Step 3:**(%%) TrackerD will auto join to the LoRaWAN network. After join success, TrackerD will start to upload message to IoT server.
183 +User can switch modes by [[changing SMOD>>path:#Positioning_Mode]].
187 187  
188 188  
189 -(% style="color:blue" %)**Positioning Mode(SMOD):**
186 +== 2.3 Uplink Payload ~-~-~-~-~-~-~-~-~-~-~-~-~-~- ==
190 190  
191 -* (% style="color:#037691" %)**GPS ONLY(Factory Settings):    **(%%)only get GPS location info.
192 -* (% style="color:#037691" %)**BLE ONLY:              **(%%)Only obtain iBeacon info via BLE. Design for Indoor tracking.
193 -* (% style="color:#037691" %)**GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.
194 194  
195 -User can switch modes by [[changing SMOD>>||anchor="H3.2.7SetPositioningMode"]].
189 +=== 2.3.1 Uplink FPORT=5, Device Status ===
196 196  
197 197  
198 198  
199 -== 2.3 Uplink Payload ==
193 +=== 2.3.2 Uplink FPORT= , Realtime GNSS Positioning ===
200 200  
195 +The default uplink payload includes totally 11 bytes. (User can use AT+MOD=0 to enable the Temperature and humidity sensor to hum/tem info from accelerometer. When accelerometer info is enable, total payload will be 15 bytes, please note 15 bytes won’t work on DR0 on US915/AU915 frequency band. )
201 201  
202 -=== 2.3.1 Uplink FPORT~=5, Device Status ===
203 203  
198 +|(((
199 +**Size**
204 204  
201 +**(bytes)**
202 +)))|4|4|2|1|(((
203 +2
205 205  
206 -=== 2.3.2 Uplink FPORT~= , Realtime GNSS Positioning ===
205 +(optional )
206 +)))|(((
207 +2
207 207  
208 -
209 -The default uplink payload includes totally 11 bytes. (User can use AT+MOD=0 to enable the Temperature and humidity sensor to hum/tem info from accelerometer. When accelerometer info is enable, total payload will be 15 bytes, please note 15 bytes won't work on DR0 on US915/AU915 frequency band. )
210 -
211 -
212 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:480px" %)
213 -|=(% scope="row" style="width: 50px;" %)(((
214 -**Size(bytes)**
215 -)))|(% style="width:60px" %)4|(% style="width:70px" %)4|(% style="width:80px" %)2|(% style="width:50px" %)1|(% style="width:88px" %)(((
216 -2(optional)
217 -)))|(% style="width:87px" %)(((
218 -2(optional)
209 +(optional)
219 219  )))
220 -|=(% style="width: 69px;" %)**Value**|(% style="width:76px" %)[[Latitude>>||anchor="HLocationinfo:"]]|(% style="width:87px" %)[[Longitude>>||anchor="HLocationinfo:"]]|(% style="width:76px" %)(((
221 -[[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
222 -)))|(% style="width:52px" %)[[FLAG>>||anchor="HFLAG:"]]|(% style="width:88px" %)[[Hum>>||anchor="HHum:"]]|(% style="width:87px" %)[[Tem>>||anchor="HTem:"]]
211 +|**Value**|[[Latitude>>path:#Location]]|[[Longitude>>path:#Location]]|(((
212 +[[Alarm &>>path:#Alarm]]
223 223  
224 -[[image:1664501958445-288.png]]
214 +[[BAT>>path:#Alarm]]
215 +)))|[[FLAG>>path:#Flag]]|Hum|[[Tem>>path:#Pitch]]
225 225  
226 226  
227 -==== (% style="color:blue" %)**Alarm & BAT:**(%%) ====
218 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image007.png]]
228 228  
229 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:250px" %)
230 -|=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)1 bit|(% style="width:80px" %)1bit|(% style="width:50px" %)14bits
231 -|=(% style="width: 72px;" %)**Value**|(% style="width:67px" %)reserve|(% style="width:118px" %)Alarm Indicate|(% style="width:63px" %)[[BAT>>||anchor="HBAT:"]] 
232 232  
221 +**Alarm & BAT:**
233 233  
234 -==== (% style="color:blue" %)**FLAG:**(%%) ====
223 +|**Size(bit)**|1 bit|1bit|14 bits
224 +|**Value**|reserve|Alarm Indicate|[[BAT>>path:#BAT]]
235 235  
236 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:250px" %)
237 -|=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)2bits|(% style="width:50px" %)1bit|(% style="width:100px" %)5 bits
238 -|=(% style="width: 79px;" %)**Value**|(% style="width:55px" %)[[MOD>>||anchor="H2.3.4BLEpositioningPayload28Fport229"]]|(% style="width:47px" %)[[LON>>||anchor="HLON:"]]|(% style="width:140px" %)Firmware version 
226 +**FLAG:**
239 239  
240 -**Example:** Payload: 0x02863D68 FAC29BAF 4B45 60 0202 011A 
228 +|**Size(bit)**|2 bits|1bit|5 bits
229 +|**Value**|[[MOD>>path:#MD]]|[[LON>>path:#LON]]|Firmware version
241 241  
242 242  
243 -==== (% style="color:blue" %)**Location info:**(%%) ====
244 244  
245 -* Latitude: 02863D68  ⇒  //if (0x//02863D68//& 0x80000000 = 0 )~://  //value = 02863D68 /1000000 = 42.351976//
246 -* Longitude: FAC29BAF  ⇒ //if (0x//FAC29BAF// & 0x80000000 = 1 )~://  //value = (0x//FAC29BAF// – 0x 100000000)/1000000 =//-87.9094//57//
233 +**Example: Payload: 0x02863D68 FAC29BAF 4B45 60 0202 011A **
247 247  
248 248  
236 +**Location info:**
249 249  
250 -(% style="color:red" %)**Important note:**
238 +* Latitude: 02863D68⇒ //if (0x//02863D68//& 0x80000000 = 0 )~://
251 251  
252 -1.  When power is low (<2.84v), GPS won't be able to get location info and GPS feature will be disabled and the location field will be filled with 0x0FFFFFFF, 0x0FFFFFFF.
240 +//value = 02863D68 /1000000 = 42.351976//
253 253  
254 -2.  In firmware version v1.5, Roll & Pitch is disabled by default.
242 +* Longitude: FAC29BAF ⇒ //if (0x//FAC29BAF// & 0x80000000 = 1 )~://
255 255  
256 -3.  When enable 9-axis motion sensor, the total payload will be 15 bytes, while US915/AU915 DR0 accept only 11 bytes payload. In this case, the payload on server will be ignore and shows as below:
244 +//value = (0x//FAC29BAF// – 0x 100000000)/1000000 =//-87.9094//57//
257 257  
258 258  
259 -[[image:1664502116362-706.png]]
247 +Important note:
260 260  
249 +1. When power is low (<2.84v), GPS won’t be able to get location info and GPS feature will be disabled and the location field will be filled with 0x0FFFFFFF, 0x0FFFFFFF.
250 +1. In firmware version v1.5, Roll & Pitch is disabled by default.
251 +1. When enable 9-axis motion sensor, the total payload will be 15 bytes, while US915/AU915 DR0 accept only 11 bytes payload. In this case, the payload on server will be ignore and shows as below:
261 261  
253 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image008.png]]
262 262  
263 -4.  While GPS can't get location info after timeout(FTIME Parameter), the latitude and longitude will be filled with all 0x00:
264 264  
265 -[[image:1664502166010-515.png]]
256 +1. While GPS can’t get location info after timeout(FTIME Parameter), the latitude and longitude will be filled with all 0x00:
266 266  
258 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image009.png]]
267 267  
260 +* **Alarm**: Example: 0x4B & 0x40 >> 6 = 0x01
261 +* **BAT**: Example: 0x0CDD & 0x3FFF ⇒ 3293 (mV).
268 268  
269 -==== (% style="color:blue" %)**Alarm:**(%%) ====
263 +The battery info shows the current voltage, for **TrackerD** version which powered by li-on battery. User can use below mapping to indicate the battery in percentage: \
270 270  
271 -Example:  0x4B & 0x40 >> 6 = 0x01
272 272  
266 +* > 4.0v : 80% ~~ 100%
267 +* 3.85v ~~3.99v: 60% ~~ 80%
268 +* 3.70v ~~ 3.84v: 40% ~~ 60%
269 +* 3.40v ~~ 3.69v: 20% ~~ 40%
270 +* < 3.39v: 0~~20%
273 273  
274 -==== (% style="color:blue" %)**BAT:**(%%) ====
275 275  
276 -Example:  0x0CDD & 0x3FFF ⇒ 3293 (mV).
273 +* **LON: **Enable/Disable LED activity for uplink
277 277  
278 -The battery info shows the current voltage, for (% style="color:blue" %)**TrackerD**(%%) version which powered by li-on battery. User can use below mapping to indicate the battery in percentage: \
275 +0x00: Disable LED indicator.
279 279  
277 +0x01: Enable LED indicator (Default Value)
280 280  
281 -* > 4.0v :  80% ~~ 100%
282 -* 3.85v ~~3.99v:  60% ~~ 80%
283 -* 3.70v ~~ 3.84v:  40% ~~ 60%
284 -* 3.40v ~~ 3.69v:  20% ~~ 40%
285 -* < 3.39v:  0~~20%
286 286  
280 +* **Hum**: 0202 = //if (0x0202 & 0x8000 = 0 ): value =// 0x0202 / 100 = +514 ⇒ 51.4 degree
281 +* **//Tem//**//: 011A =if (0x011A & 0x8000 = 1 ): value =( 0x011A - 0x10000)/10(dec) ⇒ -//28.2 degree
287 287  
288 288  
289 289  
290 -==== (% style="color:blue" %)**LON:**(%%) ====
285 +=== 2.3.3 Uplink FPORT= , History GNSS Positioning ===
291 291  
292 -
293 -Enable/Disable LED activity for uplink
294 294  
295 -0x00:  Disable LED indicator.
296 296  
297 -0x01:  Enable LED indicator (Default Value)
289 +=== 2.3.4 BLE positioning Payload(Fport=2) ===
298 298  
291 +Different MODE has different payload:
299 299  
300 -==== (% style="color:blue" %)**Hum:**(%%) ====
293 +**MODE=2**
301 301  
302 -0202 = //if (0x0202 & 0x8000 = 0 ):  value =// 0x0202 / 100 = +514 ⇒ 51.4 degree
295 +|(((
296 +**Size**
303 303  
298 +**(bytes)**
299 +)))|16|4|4|2|4|2|1
300 +|**Value**|[[UUID>>path:#Location]]|(((
301 +iBeacon
304 304  
305 -==== (% style="color:blue" %)**Tem:**(%%) ====
303 +MAJOR
304 +)))|(((
305 +iBeacon
306 306  
307 -011A =if (0x011A & 0x8000 = 1 ):  value =( 0x011A - 0x10000)/10(dec) ⇒ -//28.2 degree//
307 +MINOR
308 +)))|(((
309 +iBeacon Measured
308 308  
311 +Power
312 +)))|(((
313 +iBeacon
309 309  
315 +RSSI
316 +)))|(((
317 +[[Alarm &>>path:#Alarm]]
310 310  
311 -=== 2.3.3 Uplink FPORT~= , History GNSS Positioning ===
319 +[[BAT>>path:#Alarm]]
320 +)))|[[FLAG>>path:#Flag]]
312 312  
313 313  
323 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image010.png]]
314 314  
315 -=== 2.3.4 BLE positioning Payload(Fport2) ===
316 316  
326 +* **BAT**: Ex1: 0x4B45 & 0x3FFF ⇒ 3901 (mV).
327 +* **MODE: **Define the payload format.
328 +* **UUID: **The uuid from the strongest iBeacon.
329 +* **MAJOR**: The MAJOR from the strongest iBeacon.
330 +* **MINOR**: The MAJOR from the strongest iBeacon.
331 +* **Measured** **Power**: The Measured Power from the strongest iBeacon.
332 +* **RSSI**: The RSSI from the strongest iBeacon.
317 317  
318 -Different MODE has different payload:
319 319  
320 -**MODE=2**
321 321  
322 -(% border="1.5" cellspacing="3" style="background-color:#ffffcc; color:green; width:491px" %)
323 -|=(% scope="row" style="width: 50px;" %)(((
324 -**Size(bytes)**
325 -)))|(% style="width:30px" %)16|(% style="width:50px" %)4|(% style="width:50px" %)4|(% style="width:80px" %)2|(% style="width:50px" %)4|(% style="width:50px" %)2|(% style="width:30px" %)1
326 -|=(% style="width: 50px;" %)**Value**|(% style="width:44px" %)[[UUID>>||anchor="HLocationinfo:"]]|(% style="width:61px" %)(((
327 -iBeacon MAJOR
328 -)))|(% style="width:63px" %)(((
329 -iBeacon MINOR
330 -)))|(% style="width:71px" %)(((
331 -iBeacon Measured Power
332 -)))|(% style="width:50px" %)(((
333 -iBeacon RSSI
334 -)))|(% style="width:47px" %)(((
335 -[[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
336 -)))|(% style="width:15px" %)[[FLAG>>||anchor="HFLAG:"]]
337 -
338 -[[image:1664502425687-834.png]]
339 -
340 -
341 -* (% style="color:#037691" %)**BAT: ** (%%) Ex1: 0x4B45 & 0x3FFF ⇒ 3901 (mV).
342 -* (% style="color:#037691" %)**MODE:   **(%%)Define the payload format.
343 -* (% style="color:#037691" %)**UUID:     **(%%)The uuid from the strongest iBeacon.
344 -* (% style="color:#037691" %)**MAJOR:** (%%) The MAJOR from the strongest iBeacon.
345 -* (% style="color:#037691" %)**MINOR:**  (%%)The MAJOR from the strongest iBeacon.
346 -* (% style="color:#037691" %)**Measured Power: ** (%%) The Measured Power from the strongest iBeacon.
347 -* (% style="color:#037691" %)**RSSI:  ** (%%) The RSSI from the strongest iBeacon.
348 -
349 349  === 2.3.5 Add Payload format in TTN V3 ===
350 350  
351 -
352 352  In TTN V3, use can add a custom payload so it shows friendly.
353 353  
354 -In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**
340 +In the page Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder
355 355  
342 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image011.png]]
356 356  
357 -[[image:1664502649601-895.png]]
358 -
359 -
360 360  Add the decoder from this link:
361 361  
362 362  
363 363  Save the change the uplink message will be parsed. As below:
364 364  
365 -[[image:1664502676891-606.png]]
349 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image012.png]]
366 366  
367 367  
368 368  
353 +
354 +
369 369  == 2.4 Integrate with Datacake ==
370 370  
371 371  
372 372  After TrackerD sends data to LoRaWAN server such as TTN, use can pass the data to Datacake and plot out, currently only support GPS plot.
373 373  
374 -Instruction is here:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20Data%20Cake/#H7.Example~~-~~-AddTrackerDGPSTrackingInDataCake>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20Data%20Cake/#H7.Example--AddTrackerDGPSTrackingInDataCake]]
360 +Instruction is here: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20Data%20Cake/#H7.Example~~-~~-AddTrackerDGPSTrackingInDataCake>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20Data%20Cake/#H7.Example--AddTrackerDGPSTrackingInDataCake]]
375 375  
362 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image013.png]]
376 376  
377 -[[image:1664502695771-538.png]]
378 378  
379 -
380 -
381 381  == 2.5 Integrate with Tago ==
382 382  
383 383  
... ... @@ -385,8 +385,8 @@
385 385  
386 386  Instruction is here: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Tago.IO/#H3.A0Example-CreateTrackerD2FLGT92positioningwidget>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Tago.IO/#H3.A0Example-CreateTrackerD2FLGT92positioningwidget]]
387 387  
372 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image014.png]]
388 388  
389 -[[image:1664502715371-321.png]]
390 390  
391 391  
392 392  
... ... @@ -393,10 +393,10 @@
393 393  == 2.6 Alarm Mode ==
394 394  
395 395  
396 -User can push the (% style="color:red" %)**RED button**(%%) by more than 5 seconds to enter Alarm Mode.
380 +User can push the **RED button** by more than 5 seconds to enter Alarm Mode.
397 397  
398 398  
399 -Once enter Alarm mode, the (% style="color:green" %)**GREEN LED**(%%) will flash 3 times, the buzzer will alarm for 5 seconds, then TrackerD will immediately send a packet without location info and then send a data packet with GPS positioning information. After that, the device will send 60 packets at 1-minute intervals. The Alarm flag in the payload will be set for the next 60 packets unless exit alert mode.
383 +Once enter Alarm mode, the **GREEN LED** will flash 3 times, the buzzer will alarm for 5 seconds, then TrackerD will immediately send a packet without location info and then send a data packet with GPS positioning information. After that, the device will send 60 packets at 1-minute intervals. The Alarm flag in the payload will be set for the next 60 packets unless exit alert mode.
400 400  
401 401  
402 402  Two ways to exit alarm mode:
... ... @@ -404,10 +404,9 @@
404 404  * Server send a downlink command to exit.
405 405  * User fast press the RED button 10 times.
406 406  
407 -When exit alarm mode, (% style="color:red" %)**RED LED**(%%) will light up for 5 seconds, indicating that the alarm mode is exited. And the alert flag will be set to false.
391 +When exit alarm mode, **RED LED** will light up for 5 seconds, indicating that the alarm mode is exited. And the alert flag will be set to false.
408 408  
409 409  
410 -
411 411  == 2.7 Sports Mode ~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-- ==
412 412  
413 413  
... ... @@ -415,228 +415,220 @@
415 415  == 2.8 LED Status ==
416 416  
417 417  
418 -(% border="2" style="background-color:#ffffcc; color:green; width:636px" %)
419 -|(% style="width:157px" %)**Event**|(% style="width:271px" %)**Action**|(% style="width:202px" %)**AT+LON to control on/off**
420 -|(% style="width:157px" %)**Power On**|(% style="width:271px" %)(% style="color:blue" %)**BLUE, **(% style="color:red" %)**RED , **(% style="color:green" %)**Green** flash once|(% style="width:202px" %)N/A
421 -|(% style="width:157px" %)**Join request**|(% style="width:271px" %)(% style="color:green" %)**Green** (%%)led fast blink once (200ms)|(% style="width:202px" %)Yes
422 -|(% style="width:157px" %)**Join Success**|(% style="width:271px" %)(% style="color:green" %)**Green**(%%) led on 5 second|(% style="width:202px" %)N/A
423 -|(% style="width:157px" %)**Fixing Location**|(% style="width:271px" %)(% style="color:blue" %)**BLUE **(%%)blinks 200ms per second|(% style="width:202px" %)Yes
424 -|(% style="width:157px" %)**Fixed and uplink**|(% style="width:271px" %)(% style="color:green" %)**GREEN ***(%%)***blinks twice (200ms per blink)**|(% style="width:202px" %)Yes
425 -|(% style="width:157px" %)**Fail Fix and uplink**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)blinks twice (200ms per blink)|(% style="width:202px" %)Yes
426 -|(% style="width:157px" %)**Enter Alarm mode**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)on for 3 seconds|(% style="width:202px" %)Yes
427 -|(% style="width:157px" %)**Uplink under Alarm**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)on for 1 second|(% style="width:202px" %)Yes
428 -|(% style="width:157px" %)**Exit Alarm**|(% style="width:271px" %)(% style="color:blue" %)**BLUE **(%%)led on 5 second|(% style="width:202px" %)Yes
429 -|(% style="width:157px" %)**Get Downlink**|(% style="width:271px" %)(% style="color:green" %)**GREEN**(%%) led on 1 second|(% style="width:202px" %)Yes
430 -|(% style="width:157px" %)**Movement Detect**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)led on 500ms|(% style="width:202px" %)N/A
401 +|**Event**|**Action**|**AT+LON to control on/off**
402 +|**Power On**|**BLUE, RED , Green** flash once|N/A
403 +|**Join request**|**Green** led fast blink once (200ms)|Yes
404 +|**Join Success**|**Green** led on 5 second|N/A
405 +|**Fixing Location**|**BLUE **blinks 200ms per second|Yes
406 +|**Fixed and uplink**|**GREEN **blinks twice (200ms per blink)|Yes
407 +|**Fail Fix and uplink**|**RED **blinks twice (200ms per blink)|Yes
408 +|**Enter Alarm mode**|**RED **on for 3 seconds|Yes
409 +|**Uplink under Alarm**|**RED **on for 1 second|Yes
410 +|**Exit Alarm**|**BLUE **led on 5 second|Yes
411 +|**Get Downlink**|**GREEN** led on 1 second|Yes
412 +|**Movement Detect**|**RED **on 500ms|N/A
431 431  
432 -== 2.9 Button Function ==
433 433  
434 434  
435 -(% style="color:green" %)**RESET button:**
436 436  
437 -[[image:1664502835802-546.png]]
438 438  
418 +== 2.9 Button Function ==
419 +
420 +**RESET button:**
421 +
422 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image015.png]]
423 +
439 439  Push this button will reboot the device. Device will exit alarm mode and re-join to LoRaWAN server.
440 440  
441 441  
442 -(% style="color:red" %)**RED button:**
427 +**RED button:**
443 443  
444 -[[image:1664502854406-763.png]]
429 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image016.png]]
445 445  
431 +|**Function**|**Action**|**Description**
432 +|Send Alarm|Keep Pressing **RED** button for more than 5 seconds|Enter Alarm Mode.  See [[Alarm Mode>>path:#Alarm_Mode]]
433 +|Exit Alarm Mode|Fast press the **RED** button 10 times|Exit Alarm Mode
434 +|Enter Deep Sleep Mode|Press and hold the button for 10 seconds, then quickly press the device 3 times to enter deep sleep|This is the mode ship out from factory. CPU will be complete in sleep mode and no LoRa activity, only use before deploy.
446 446  
447 -(% border="2" style="background-color:#ffffcc; color:green; width:627px" %)
448 -|(% style="width:135px" %)**Function**|(% style="width:220px" %)**Action**|(% style="width:265px" %)**Description**
449 -|(% style="width:135px" %)Send Alarm|(% style="width:220px" %)Keep Pressing (% style="color:red" %)**RED**(%%) button for more than 5 seconds|(% style="width:265px" %)Enter Alarm Mode.  See [[Alarm Mode>>||anchor="H2.6AlarmMode"]]
450 -|(% style="width:135px" %)Exit Alarm Mode|(% style="width:220px" %)Fast press the (% style="color:red" %)**RED** (%%)button 10 times|(% style="width:265px" %)Exit Alarm Mode
451 -|(% style="width:135px" %)Enter Deep Sleep Mode|(% style="width:220px" %)Press and hold the button for 10 seconds, then quickly press the device 3 times to enter deep sleep|(% style="width:265px" %)This is the mode ship out from factory. CPU will be complete in sleep mode and no LoRa activity, only use before deploy.
452 452  
453 -== 2.10 USB Port Function ==
454 454  
455 455  
439 +== 2.10 USB Port Function ==
440 +
456 456  The USB interface of TrackerD has below functions:
457 457  
458 458  * Power on the device
459 459  * Recharge the battery
460 -* [[Configure Device>>||anchor="H3.ConfigureTrackerDviaATcommandorLoRaWANdownlink"]]
461 -* [[Upgrade Firmware>>||anchor="H5.UploadFirmware"]]
445 +* [[Configure Device>>path:#AT_Command]]
446 +* [[Upgrade Firmware>>path:#upgrade_image]]
462 462  
463 -= 3. Configure TrackerD via AT command or LoRaWAN downlink =
464 464  
465 465  
466 -User can configure TrackerD via AT Command or LoRaWAN Downlink.
467 467  
468 -LoRaWAN Downlink instruction for different platforms:  [[IoT LoRaWAN Server>>doc:Main.WebHome]]
469 469  
452 += 3. Configure TrackerD via AT command or LoRaWAN downlink =
470 470  
471 471  
472 -== 3.1 Access AT Command ==
455 +User can configure TrackerD via AT Command or LoRaWAN Downlink.
473 473  
457 +LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>url:http://wiki.dragino.com/xwiki/bin/view/Main/]]
474 474  
475 -TrackerD supports the AT command set in stock firmware. User can connect to TrackerD with TYPE-C cable to use AT commands as shown below.
476 476  
460 +== 3.1 Access AT Command ==
477 477  
478 -[[image:1664502999401-486.png]]
462 +TrackerD supports the AT command set in stock firmware. User can connect to TrackerD with TYPE-C cable to use AT commands as shown below. ...
479 479  
464 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image017.png]]
480 480  
481 -In PC, User needs to set serial tool baud rate to (% style="color:green" %)**115200**(%%) to access serial console for TrackerD. TrackerD will output system info once power on and user will be able to send AT commands:
482 482  
467 +In PC, User needs to set serial tool baud rate to **115200** to access serial console for TrackerD. TrackerD will output system info once power on and user will be able to send AT commands:
483 483  
484 -[[image:1664503022490-662.png]]
485 485  
470 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image018.png]]
486 486  
487 487  
488 -[[image:1664503035713-500.png]]
489 489  
474 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image019.png]]
490 490  
476 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image020.png]]
491 491  
492 -[[image:1664503047675-651.png]]
493 493  
494 -
495 -
496 496  == 3.2 Command Set ==
497 497  
498 498  
499 499  === 3.2.1 Set Transmit Interval ===
500 500  
501 -
502 502  Set device uplink interval.
503 503  
504 -* (% style="color:blue" %)**AT Command:**
486 +* AT Command:
505 505  
506 -(% style="color:#037691" %)**AT+TDC=xxx **
488 +AT+TDC=xxx
507 507  
508 -Example:  AT+TDC=300000. Means set interval to 5 minutes(300 seconds)
490 +Example: AT+TDC=300000. Means set interval to 5 minutes(300 seconds)
509 509  
510 510  
511 -* (% style="color:blue" %)**Downlink Payload (prefix 0x01):**
493 +* Downlink Payload (prefix 0x01):
512 512  
513 -(% style="color:#037691" %)**0x01 00 01 2C**  (%%) ~/~/  Same as AT+TDC=300000
495 +0x01 00 01 2C     ~/~/ Same as AT+TDC=300000
514 514  
515 515  
516 -
517 517  === 3.2.2 Set Alarm Packet transmission interval ===
518 518  
519 -
520 520  Set alarm packet transmit interval
521 521  
522 -* (% style="color:blue" %)**AT Command:**
502 +* AT Command:
523 523  
524 -(% style="color:#037691" %)**AT+ATDC=xx. **
504 +AT+ATDC=xx.
525 525  
526 -Example:  AT+ATDC=60000  **~-~->    ** Set Alarm Packet Interval to 60 seconds. TrackerD will send every 60 seconds in Alarm mode, Default Value: 60000
506 +Example: AT+ATDC=60000  à Set Alarm Packet Interval to 60 seconds. TrackerD will send every 60 seconds in Alarm mode, Default Value: 60000
527 527  
528 528  
529 -* (% style="color:blue" %)**Downlink Payload (prefix 0xB1):**
509 +* Downlink Payload (prefix 0xB1):
530 530  
531 -(% style="color:#037691" %)**0xB1 00 00 3C ** (%%) ~/~/  Same as AT+ATDC=60000
511 +0xB1 00 00 3C    ~/~/Same as AT+ATDC=60000
532 532  
533 533  
514 +=== 3.3.3 Set Sports Mode Packet transmission interval ===
534 534  
535 -=== 3.2.3 Set Sports Mode Packet transmission interval ===
536 -
537 -
538 538  Set sports packet transmit interval
539 539  
540 -* (% style="color:blue" %)**AT Command:**
518 +* AT Command:
541 541  
542 -(% style="color:#037691" %)**AT+MTDC=xx. **
520 +AT+MTDC=xx.
543 543  
544 - Example:  AT+MTDC=300000  **~-~->    ** Set Sports Mode Packet Interval to 300 seconds. TrackerD will send every 300 seconds in Sports mode, Default Value: 300000
522 + Example: AT+MTDC=300000  à Set Sports Mode Packet Interval to 300 seconds. TrackerD will send every 300 seconds in Sports mode, Default Value: 300000
545 545  
546 546  
547 -* (% style="color:blue" %)**Downlink Payload (prefix 0x03):**
525 +* Downlink Payload (prefix 0x03):
548 548  
549 -(% style="color:#037691" %)**0x03 00 01 2C**  (%%) ~/~/  Same as AT+ MTDC=3000000
527 +0x03 00 01 2C    ~/~/Same as AT+ MTDC=3000000
550 550  
551 551  
552 552  
553 -=== 3.2.4 Exit Alarm ===
531 +=== 3.3.4 Exit Alarm ===
554 554  
555 -
556 556  Server send downlink command to exit Alarm mode
557 557  
558 -* (% style="color:blue" %)**AT Command: No AT Command**
535 +* AT Command:
559 559  
560 -* (% style="color:blue" %)**Downlink Payload (prefix 0x02):**
537 +No AT Command
561 561  
562 -(% style="color:#037691" %)**0x02 01**    (%%) ~/~/  Exit Alarm Mode
563 563  
540 +* Downlink Payload (prefix 0x02):
564 564  
542 +0x02 01     ~/~/ Exit Alarm Mode
565 565  
566 -=== 3.2.5 Disable/Enable LED flash ===
567 567  
545 +=== 3.3.5 Disable/Enable LED flash ===
568 568  
569 569  Disable/Enable LED for position, downlink and uplink
570 570  
571 -* (% style="color:blue" %)**AT Command:**
549 +* AT Command:
572 572  
573 -(% style="color:#037691" %)**AT+LON=xx.  (Disable (0), Enable (1), default:1)**
551 +AT+LON=xx.  (Disable (0), Enable (1), default:1)
574 574  
575 - Example: AT+LON=0  **~-~-> ** Disable LED for position, downlink and uplink.
553 + Example: AT+LON=0 à Disable LED for position, downlink and uplink.
576 576  
577 577  
578 -* (% style="color:blue" %)**Downlink Payload (prefix 0xAE):**
556 +* Downlink Payload (prefix 0xAE):
579 579  
580 -(% style="color:#037691" %)**0xAE 00 ** (%%) ~/~/  Same as AT+LON=0
558 +0xAE 00    ~/~/Same as AT+LON=0
581 581  
582 582  
583 583  
584 -=== 3.2.6 Disable/Enable movement detect (Debug Only) ===
585 585  
563 +=== 3.3.6 Disable/Enable movement detect (Debug Only) ===
586 586  
587 587  User can use this feature to check and set thread hole of movement detect
588 588  
589 -* (% style="color:blue" %)**AT Command:**
567 +* AT Command:
590 590  
591 -(% style="color:#037691" %)**AT+INTWK=xx.  (Disable (0), Enable (1), default:0)**
569 +AT+INTWK=xx.  (Disable (0), Enable (1), default:0)
592 592  
593 - Example:  AT+ INTWK =1  **~-~->   ** Enable detect movement.
571 + Example: AT+ INTWK =1 à Enable detect movement.
594 594  
595 595  
596 -* (% style="color:blue" %)**Downlink Payload (prefix 0xAF):**
574 +* Downlink Payload (prefix 0xAF):
597 597  
598 -(% style="color:#037691" %)**0xAF 01 ** (%%) ~/~/  Same as AT+ INTWK =1
576 +0xAF 01    ~/~/Same as AT+ INTWK =1
599 599  
600 600  
601 601  
602 -=== 3.2.7 Set Positioning Mode ===
580 +=== 3.3.7 Set Positioning Mode ===
603 603  
604 -
605 605  SMOD define the how TrackerD scan and uplink date.
606 606  
607 -GPS室外定位模式：  设备默认模式，设备入网后会发送device当前模式下的信息，随后立即定位发送数据包（默认是3分钟定位，超过将发送无效数据），如果出现意外情况下，快速按键3下，将会发出报警消息（默认每分钟发送一次）。GPS还有一种logdata模式，在断网的情况下将数据存储下来，等到有网的时候，一次将数据以每10秒上报。
584 +GPS室外定位模式：设备默认模式，设备入网后会发送device当前模式下的信息，随后立即定位发送数据包（默认是3分钟定位，超过将发送无效数据），如果出现意外情况下，快速按键3下，将会发出报警消息（默认每分钟发送一次）。GPS还有一种logdata模式，在断网的情况下将数据存储下来，等到有网的时候，一次将数据以每10秒上报。
608 608  
609 -BLE室内定位模式：  设备入网后会发送device当前模式下的信息，随后立即定位发送数据包（默认是5秒，超过将发送无效数据），如果出现意外情况下，快速按键3下，将会发出报警消息（默认每3分钟发送一次）。
586 + BLE室内定位模式：设备入网后会发送device当前模式下的信息，随后立即定位发送数据包（默认是5秒，超过将发送无效数据），如果出现意外情况下，快速按键3下，将会发出报警消息（默认每3分钟发送一次）。
610 610  
611 -GPS和BLE混动模式：设备入网后会发送device当前模式下的信息，随后立即判断是否在室内，如果是就进行BLE定位，不是就GPS定位。如果出现意外情况下，快速按键3下，将会发出报警消息（默认每分钟发送一次）。
588 + GPS和BLE混动模式：设备入网后会发送device当前模式下的信息，随后立即判断是否在室内，如果是就进行BLE定位，不是就GPS定位。如果出现意外情况下，快速按键3下，将会发出报警消息（默认每分钟发送一次）。
612 612  
613 -运动模式：  设备入网后会发送device当前模式下的信息，随后发送GPS定位数据，设备判断是否在运动，没有运动传感器没有检测到动作，立即进入静止状态（默认20分钟），如果产生运动，将每5分钟发送一次数据，再第五分钟后检测设备有误运动，无将切换到静止状态，有立即发送数据。
590 +运动模式：设备入网后会发送device当前模式下的信息，随后发送GPS定位数据，设备判断是否在运动，没有运动传感器没有检测到动作，立即进入静止状态（默认20分钟），如果产生运动，将每5分钟发送一次数据，再第五分钟后检测设备有误运动，无将切换到静止状态，有立即发送数据。
614 614  
615 615  
616 616  
617 -* (% style="color:blue" %)**AT Command:**
618 618  
619 -(% style="color:#037691" %)**AT+SMOD=xx. **
595 +* AT Command:
620 620  
597 +AT+SMOD=xx.
621 621  
622 - **Example:**
599 + Example:
623 623  
624 - AT+ SMOD =1,0  **~-~-> ** GPS+ BAT+ State+Tem&Hum
601 + AT+ SMOD =1,0    à GPS+ BAT+ State+Tem&Hum
625 625  
626 - AT+ SMOD =1,1    **~-~->**  GPS +BAT State
603 + AT+ SMOD =1,1    à GPS +BAT State
627 627  
628 - AT+ SMOD =2,3    **~-~->**  (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State。
605 + AT+ SMOD =2,3    à (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State。
629 629  
630 630  
631 -* (% style="color:blue" %)**Downlink Payload (prefix 0xA5):**
608 +* Downlink Payload (prefix 0xA5):
632 632  
633 -(% style="color:#037691" %)**0xA5 01 00**    (%%) ~/~/  Same as AT+ SMOD =1,0
610 +0xA5 01 00     ~/~/ Same as AT+ SMOD =1,0
634 634  
635 635  
613 +=== 3.3.8 Set MAX GPS position time ===
636 636  
637 -=== 3.2.8 Set MAX GPS position time ===
638 -
639 -
640 640  Set max positioning time, default is 150 seconds. TrackerD will try to get location info within this period. If fail to get position data within this time, TrackerD will use 000000 for latitude and longitude.
641 641  
642 642  
... ... @@ -643,60 +643,60 @@
643 643  If AT+FTIME=0. The GPS module will be always powered and positioning. This will highly increase the power consumption (up to 50mA). When AT+FTIME=0, it will improve fix accuracy and shorten the acquire time for next uplink.
644 644  
645 645  
646 -* (% style="color:blue" %)**AT Command:**
621 +* AT Command:
647 647  
648 -(% style="color:#037691" %)**AT+FTIME=xx**  (%%) **~-~-> ** Set to use xx as max fix time.
623 +AT+FTIME=xx  à Set to use xx as max fix time.
649 649  
650 -Example:  AT+FTIME=150
625 +Example: AT+FTIME=150
651 651  
652 652  
653 -* (% style="color:blue" %)**Downlink Payload (prefix 0xAA):**
628 +* Downlink Payload (prefix 0xAA):
654 654  
655 -(% style="color:#037691" %)**0xAA 00 96 ** (%%) ~/~/  Set AT+FTIME=150
630 +0xAA 00 96      ~/~/Set AT+FTIME=150
656 656  
657 657  
658 658  
634 +
659 659  === 3.3.9 Set PDOP value for GPS fix accuracy ===
660 660  
637 +PDOP(Position Dilution of Precision) filter, TrackerD will only accept GPS data with a lower PDOP value than pre-configure PDOP value. If device can’t get a valid GPS packet within FTIME timeout, it will use the GPS data with lowest PDOP value to server.
661 661  
662 -PDOP(Position Dilution of Precision) filter, TrackerD will only accept GPS data with a lower PDOP value than pre-configure PDOP value. If device can't get a valid GPS packet within FTIME timeout, it will use the GPS data with lowest PDOP value to server.
663 663  
664 -
665 665  A GPS packet with lower PDOP has higher accuracy. PDOP default value is 2.0
666 666  
667 667  
668 -* (% style="color:blue" %)**AT Command:**
643 +* AT Command:
669 669  
670 -(% style="color:#037691" %)**AT+PDOP=2.5 ** (%%) **~-~->  ** Set PDOP to 2.5
645 +AT+PDOP=2.5  à Set PDOP to 2.5
671 671  
672 672  
673 -* (% style="color:blue" %)**Downlink Payload (prefix 0xAD):**
648 +* Downlink Payload (prefix 0xAD):
674 674  
675 -(% style="color:#037691" %)**0xAD 00 0A**   (%%) ~/~/  Set AT+PDOP=1  (0x0A / 10 =1)
650 +0xAD 00 0A    ~/~/Set AT+PDOP=1    (0x0A / 10 =1)
676 676  
677 -(% style="color:#037691" %)**0xAD 00 19**   (%%) ~/~/  Set AT+PDOP=2.5    (0x19 / 10 =2.5)
652 +0xAD 00 19    ~/~/Set AT+PDOP=2.5    (0x19 / 10 =2.5)
678 678  
679 -(% style="color:#037691" %)**0xAD 00 46**    (%%) ~/~/  Set AT+PDOP=7  (0x46 / 10 =7)
654 +0xAD 00 46    ~/~/Set AT+PDOP=7     (0x46 / 10 =7)
680 680  
656 +Disable/Enable the confirmation mode
681 681  
658 +* AT Command:
682 682  
683 -Disable/Enable the confirmation mode
660 +AT+CFM=xx.
684 684  
685 -* (% style="color:blue" %)**AT Command:**
662 + Example:
686 686  
687 -(% style="color:#037691" %)**AT+CFM=xx. **
664 + AT+ CFM=0    à Disable confirmation
688 688  
666 + AT+ CFM=1    à Enable confirmation
689 689  
690 -**~ Example:**
691 691  
692 - AT+ CFM=0    **~-~->   ** Disable confirmation
669 +* Downlink Payload (prefix 0x05):
693 693  
694 - AT+ CFM=1    **~-~->  ** Enable confirmation
671 +0x05 01      ~/~/ Same as AT+ SMOD =1
695 695  
696 696  
697 -* (% style="color:blue" %)**Downlink Payload (prefix 0x05):**
698 698  
699 -(% style="color:#037691" %)**0x05 01 **(%%) ~/~/  Same as AT+ SMOD =1
700 700  
701 701  
702 702  
... ... @@ -709,39 +709,35 @@
709 709  
710 710  == 5.1 Firmware Change Log ==
711 711  
712 -
713 713  **[[See this link>>url:https://github.com/dragino/TrackerD]]**
714 714  
715 715  
716 -
717 717  == 5.2 How to upgrade firmware ==
718 718  
692 +User can use the TrackerD ’s USB port to upgrade firmware into it. The hardware connection for upgrade firmware is as below:
719 719  
720 -User can use the TrackerD's USB port to upgrade firmware into it. The hardware connection for upgrade firmware is as below:
721 721  
695 +**(% style="color:blue" %)Step1:  **(%%)Connect TrackerD and PC via USB cable shipped with TrackerD.
722 722  
723 -(% style="color:blue" %)**Step1:  **(%%)Connect TrackerD and PC via USB cable shipped with TrackerD.
697 +**(% style="color:blue" %)Step2:** (%%) Install CH9102 driver in the PC.
724 724  
725 -
726 -(% style="color:blue" %)**Step2:** (%%) Install CH9102 driver in the PC.
727 -
728 728  After installation of the driver and plug in TrackerD, user should be able to see com port in PC's device manager.
729 729  
730 730  
731 -(% style="color:blue" %)**Step3：**(%%) Download and Install Flash Tool:  [[https:~~/~~/www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools>>url:https://www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools]]
702 +**(% style="color:blue" %)Step3：**(%%) Download and Install Flash Tool:
732 732  
704 +[[https:~~/~~/www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools>>url:https://www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools]]
733 733  
734 -(% style="color:blue" %)**Step4:** (%%) Run Flash Download Tool and configure chip type to ESP32
706 +**(% style="color:blue" %)Step4:** (%%) Run Flash Download Tool and configure chip type to ESP32
735 735  
736 736  
737 -[[image:1664503563660-578.png]]
709 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image021.png||alt="image-20220712083115-1.png"]]
738 738  
711 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image022.png||alt="image-20220712083115-2.png"]]
739 739  
740 -[[image:1664503574618-659.png]]
741 741  
714 +**(% style="color:blue" %)Step5:** (%%) Select the firmware file (.bin format), com port and proper SPI configure. Clink Start. Bin file location:
742 742  
743 -(% style="color:blue" %)**Step5:** (%%) Select the firmware file (.bin format), com port and proper SPI configure. Clink Start. Bin file location:
744 -
745 745  [[https:~~/~~/www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0>>url:https://www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0]]
746 746  
747 747  
... ... @@ -751,17 +751,16 @@
751 751  
752 752  ESP_LORA-eeprom-class.bin @ 0x10000
753 753  
725 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image023.png||alt="image-20220712083115-3.png"]]
754 754  
755 -[[image:1664503593459-435.png]]
727 +After upgrade finish, it will show finish as below:
756 756  
729 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image024.png||alt="image-20220712083115-4.png"]]
757 757  
758 758  
759 -After upgrade finish, it will show finish as below:
760 760  
761 -[[image:1664503611848-385.png]]
762 762  
763 763  
764 -
765 765  = 6. Developer Guide =
766 766  
767 767  
... ... @@ -771,26 +771,28 @@
771 771  === 6.1.1 Set up ARDUINO compile environment ===
772 772  
773 773  
774 -* Download the latest Arduino software (IDE) from the Arduino official website:  [[https:~~/~~/www.arduino.cc/en/Main/Software>>url:https://www.arduino.cc/en/Main/Software]]
744 +* Download the latest Arduino software (IDE) from the Arduino official website
775 775  
776 -Install IDE on PC, open and click (% style="color:#037691" %)**File ~-~-> Preference**,(%%) add the following URL:  [[https:~~/~~/dl.espressif.com/dl/package_esp32_index.json>>url:https://links.jianshu.com/go?to=https%3A%2F%2Fdl.espressif.com%2Fdl%2Fpackage_esp32_index.json]]
746 +[[https:~~/~~/www.arduino.cc/en/Main/Software>>url:https://www.arduino.cc/en/Main/Software]]
777 777  
748 +Install IDE on PC, open and click File ~-~-> Preference, add the following URL [[https:~~/~~/dl.espressif.com/dl/package_esp32_index.json>>url:https://links.jianshu.com/go?to=https%3A%2F%2Fdl.espressif.com%2Fdl%2Fpackage_esp32_index.json]]
778 778  
779 -[[image:1664503635019-941.png]]
750 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image025.png]]
780 780  
752 +* Go to tools ~-~-> Boards ~-~-> Boards Manager, find the esp32 information and install it.
781 781  
782 -* (% style="color:#037691" %)**Go to tools ~-~-> Boards ~-~-> Boards Manager**,(%%) find the esp32 information and install it.
754 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image026.png]]
783 783  
784 -[[image:1664503715811-892.png]]
785 785  
757 +* Download the latest TrackerD from the dragino github
786 786  
759 +[[https:~~/~~/github.com/dragino/TrackerD>>url:https://github.com/dragino/TrackerD]]
787 787  
788 -* Download the latest TrackerD from the dragino github: [[https:~~/~~/github.com/dragino/TrackerD>>url:https://github.com/dragino/TrackerD]]
789 789  
790 -Put the Library in the TrackerD directory into the libraries file in the Arduino directory:
762 +Put the Library in the TrackerD directory into the libraries file in the Arduino directory
791 791  
764 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image027.png]]
792 792  
793 -[[image:1664503752288-974.png]]
794 794  
795 795  
796 796  
... ... @@ -797,21 +797,21 @@
797 797  == 6.2 Source Code ==
798 798  
799 799  
800 -* (% style="color:blue" %)**Open the example in the TrackerD file, please select the correct port in the IDE, as shown below:**
772 +* Open the example in the TrackerD file, please select the correct port in the IDE, as shown below:
801 801  
802 -[[image:1664503794261-827.png]]
774 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image028.png]]
803 803  
776 +* Click to upload
804 804  
778 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image029.png]]
805 805  
806 -* (% style="color:blue" %)**Click to upload**
780 +* Check the result, if the upload is successful, as shown below, open the serial port to view the data
807 807  
808 -[[image:1664503808294-336.png]]
809 809  
783 +[[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image030.png]] [[image:file:///C:/Users/93456/AppData/Local/Temp/msohtmlclip1/01/clip_image031.png]]
810 810  
811 811  
812 -* (% style="color:blue" %)**Check the result, if the upload is successful, as shown below, open the serial port to view the data**
813 813  
814 -[[image:1664503824081-592.png]] [[image:1664503831430-500.png]]
815 815  
816 816  
817 817  
... ... @@ -818,10 +818,11 @@
818 818  = 7.  FAQ =
819 819  
820 820  
793 +
821 821  == 7.1 How to change the LoRa Frequency Bands/Region? ==
822 822  
823 823  
824 -User can follow the introduction for [[how to upgrade image>>||anchor="H5.UploadFirmware"]]. When download the images, choose the required image file for download.
797 +User can follow the introduction for [[how to upgrade image>>path:#upgrade_image]]. When download the images, choose the required image file for download.
825 825  
826 826  
827 827  
... ... @@ -851,6 +851,7 @@
851 851  (% style="color:blue" %)**XXX**(%%): The default frequency band
852 852  
853 853  * (% style="color:red" %)**EU433**(%%): Default frequency band EU433
827 +* (% style="color:red" %)**CN470**(%%): Default frequency band CN470
854 854  * (% style="color:red" %)**EU868**(%%): Default frequency band EU868
855 855  * (% style="color:red" %)**IN865**(%%): Default frequency band IN865
856 856  * (% style="color:red" %)**KR920**(%%): Default frequency band KR920
... ... @@ -858,25 +858,33 @@
858 858  * (% style="color:red" %)**AU915**(%%): Default frequency band AU915
859 859  * (% style="color:red" %)**US915**(%%): Default frequency band US915
860 860  
835 +
861 861  = 9.  Packing Info =
862 862  
863 863  
864 864  **Package Includes**:
865 865  
866 -* TrackerD LoRaWAN GPS/BLE Tracker x 1
867 -* USB recharge & program cable x 1
841 +* TrackerD x 1
842 +* Rechargeable cable x 1
843 +* Program Cable x 1
868 868  
869 869  **Dimensions and Weight**:
870 870  
871 -* Device Size: 85 x 48 x 15 cm
872 -* Weight: 50g
847 +* Device Size: 85 x 48 x 15 mm/pcs
848 +* Weight: 55g/pcs
873 873  
874 -= 10. Support =
875 875  
876 876  
852 += 10. Support =
853 +
877 877  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
878 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]]
855 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to
879 879  
857 +[[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]]
858 +
859 +
860 +
861 +
880 880  = 11.  Reference =
881 881  
882 882  
1664503824081-592.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -77.4 KB
Content
1664503831430-500.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -147.8 KB
Content
1664505654417-133.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -27.5 KB
Content