Last modified by Xiaoling on 2025/04/27 16:48
<
From version < 51.22 >
edited by Xiaoling
on 2022/09/30 14:51
To version < 51.1 >
edited by Xiaoling
on 2022/09/30 10:40
>
Change comment: Uploaded new attachment "1664505654417-133.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -1,13 +7,6 @@
1 -(% style="text-align:center" %)
2 -[[image:1664505654417-133.png]]
3 -
4 -
5 -
6 -
7 7  (% class="wikigeneratedid" %)
8 8  **Table of Contents:**
9 9  
10 -{{toc/}}
11 11  
12 12  
13 13  
... ... @@ -25,14 +25,10 @@
25 25  (((
26 26  In TrackerD, there are various sensors such as GPS, WiFi, BLE, Temperature, Humidity, Motion Detection, and Buzzer. User can use TrackerD for different tracking scenario.
27 27  
28 -(((
29 29  TrackerD is program friendly. Developers can use Arduino IDE to customize the software of TrackerD to fit their IoT solution.
30 -)))
31 31  
32 -(((
33 33  The LoRa wireless technology used in TrackerD allows the user to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional tracking services.
34 34  )))
35 -)))
36 36  
37 37  (((
38 38  TrackerD is equipped with a (% style="color:blue" %)**1000mAh Li-on rechargeable battery**(%%). Each TrackerD has a worldwide unique OTAA keys to join the LoRaWAN network.
... ... @@ -61,13 +61,11 @@
61 61  * EEPROM: 520 KB
62 62  * Clock Speed: 32Mhz
63 63  
64 -
65 65  (% style="color:blue" %)**Common DC Characteristics:**
66 66  
67 67  * Supply Voltage: 5V via USB port or Internal li-on battery
68 68  * Operating Temperature: -40 ~~ 60°C
69 69  
70 -
71 71  (% style="color:blue" %)**LoRa Spec:**
72 72  
73 73  * Frequency Range,
... ... @@ -89,12 +89,10 @@
89 89  * Packet engine up to 256 bytes with CRC.
90 90  * LoRaWAN 1.0.3 Specification
91 91  
92 -
93 93  (% style="color:blue" %)**Battery:**
94 94  
95 95  * 1000mA Li-on Battery power (for model TrackerD)
96 96  
97 -
98 98  (% style="color:blue" %)**Power Consumption**
99 99  
100 100  * Sleeping Mode: 200uA
... ... @@ -109,7 +109,7 @@
109 109  * LoRaWAN 1.0.3 Class A
110 110  * ESP32 PICO D4
111 111  * SX1276/78 Wireless Chip
112 -** Arduino IDE Compatible
97 +* Arduino IDE Compatible
113 113  * Open source hardware / software
114 114  * Regular/ Real-time GPS,BLE,WIFI tracking
115 115  * Built-in3 axis accelerometer (LIS3DH)
... ... @@ -122,7 +122,6 @@
122 122  * Datalog
123 123  
124 124  
125 -
126 126  == 1.4  Applications ==
127 127  
128 128  
... ... @@ -158,10 +158,11 @@
158 158  
159 159  Each TrackerD is shipped with a sticker with the default device EUI as below:
160 160  
161 -
162 162  [[image:1664501677253-891.png]]
163 163  
164 164  
148 +
149 +
165 165  Input these keys to their LoRaWAN Server portal. Below is TTN V3 screen shot:
166 166  
167 167  
... ... @@ -195,15 +195,15 @@
195 195  
196 196  (% style="color:blue" %)**Positioning Mode(SMOD):**
197 197  
198 -* (% style="color:#037691" %)**GPS ONLY(Factory Settings):    **(%%)only get GPS location info.
199 -* (% style="color:#037691" %)**BLE ONLY:              **(%%)Only obtain iBeacon info via BLE. Design for Indoor tracking.
200 -* (% style="color:#037691" %)**GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.
183 +* **GPS ONLY(Factory Settings): **only get GPS location info.
184 +* **BLE ONLY: **Only obtain iBeacon info via BLE. Design for Indoor tracking.
185 +* **GPS/BLE Hybrid: **Combination for Indoor and Outdoor tracking.
201 201  
202 -User can switch modes by [[changing SMOD>>||anchor="H3.2.7SetPositioningMode"]].
187 +User can switch modes by [[changing SMOD>>path:#Positioning_Mode]].
203 203  
204 204  
205 205  
206 -== 2.3 Uplink Payload ==
191 +== 2.3 Uplink Payload ~-~-~-~-~-~-~-~-~-~-~-~-~-~- ==
207 207  
208 208  
209 209  === 2.3.1 Uplink FPORT~=5, Device Status ===
... ... @@ -210,49 +210,63 @@
210 210  
211 211  
212 212  
213 -=== 2.3.2 Uplink FPORT~= , Realtime GNSS Positioning ===
198 +=== 2.3.2 Uplink FPORT~= , Realtime GNSS Positioning ===
214 214  
215 215  
216 216  The default uplink payload includes totally 11 bytes. (User can use AT+MOD=0 to enable the Temperature and humidity sensor to hum/tem info from accelerometer. When accelerometer info is enable, total payload will be 15 bytes, please note 15 bytes won't work on DR0 on US915/AU915 frequency band. )
217 217  
218 218  
219 -(% border="1.5" cellspacing="3" style="background-color:#ffffcc; color:green; width:520px" %)
220 -|=(% scope="row" style="width: 80px;" %)(((
221 -**Size(bytes)**
222 -)))|(% style="width:60px" %)4|(% style="width:70px" %)4|(% style="width:80px" %)2|(% style="width:50px" %)1|(% style="width:80px" %)(((
223 -2(optional )
224 -)))|(% style="width:80px" %)(((
225 -2(optional)
204 +(% border="2" style="background-color:#ffffcc; color:green; width:537px" %)
205 +|(% style="width:69px" %)(((
206 +**Size**
207 +
208 +**(bytes)**
209 +)))|(% style="width:76px" %)4|(% style="width:87px" %)4|(% style="width:76px" %)2|(% style="width:52px" %)1|(% style="width:88px" %)(((
210 +2
211 +
212 +(optional )
213 +)))|(% style="width:83px" %)(((
214 +2
215 +
216 +(optional)
226 226  )))
227 -|=(% style="width: 69px;" %)**Value**|(% style="width:76px" %)[[Latitude>>||anchor="HLocationinfo:"]]|(% style="width:87px" %)[[Longitude>>||anchor="HLocationinfo:"]]|(% style="width:76px" %)(((
228 -[[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
229 -)))|(% style="width:52px" %)[[FLAG>>||anchor="HFLAG:"]]|(% style="width:88px" %)[[Hum>>||anchor="HHum:"]]|(% style="width:83px" %)[[Tem>>||anchor="HTem:"]]
218 +|(% style="width:69px" %)**Value**|(% style="width:76px" %)[[Latitude>>path:#Location]]|(% style="width:87px" %)[[Longitude>>path:#Location]]|(% style="width:76px" %)(((
219 +[[Alarm &>>path:#Alarm]]
230 230  
221 +[[BAT>>path:#Alarm]]
222 +)))|(% style="width:52px" %)[[FLAG>>path:#Flag]]|(% style="width:88px" %)Hum|(% style="width:83px" %)[[Tem>>path:#Pitch]]
223 +
224 +
225 +
231 231  [[image:1664501958445-288.png]]
232 232  
233 233  
234 -==== (% style="color:blue" %)Alarm & BAT:(%%) ====
229 +**Alarm & BAT:**
235 235  
236 -(% border="1.5" cellspacing="3" style="background-color:#ffffcc; color:green; width:329px" %)
237 -|=(% scope="row" style="width: 72px;" %)**Size(bit)**|(% style="width:67px" %)1 bit|(% style="width:118px" %)1bit|(% style="width:63px" %)14 bits
238 -|=(% style="width: 72px;" %)**Value**|(% style="width:67px" %)reserve|(% style="width:118px" %)Alarm Indicate|(% style="width:63px" %)[[BAT>>||anchor="HBAT:"]] 
231 +(% border="2" style="background-color:#ffffcc; color:green; width:329px" %)
232 +|(% style="width:72px" %)**Size(bit)**|(% style="width:67px" %)1 bit|(% style="width:118px" %)1bit|(% style="width:63px" %)14 bits
233 +|(% style="width:72px" %)**Value**|(% style="width:67px" %)reserve|(% style="width:118px" %)Alarm Indicate|(% style="width:63px" %)[[BAT>>path:#BAT]] 
239 239  
240 -==== (% style="color:blue" %)FLAG:(%%) ====
241 241  
242 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:332px" %)
243 -|=(% scope="row" style="width: 79px;" %)**Size(bit)**|(% style="width:55px" %)2 bits|(% style="width:47px" %)1bit|(% style="width:140px" %)5 bits
244 -|=(% style="width: 79px;" %)**Value**|(% style="width:55px" %)[[MOD>>||anchor="H2.3.4BLEpositioningPayload28Fport229"]]|(% style="width:47px" %)[[LON>>||anchor="HLON:"]]|(% style="width:140px" %)Firmware version 
245 245  
246 -**Example:** Payload: 0x02863D68 FAC29BAF 4B45 60 0202 011A 
237 +**FLAG:**
247 247  
239 +(% border="2" style="background-color:#ffffcc; color:green; width:332px" %)
240 +|(% style="width:79px" %)**Size(bit)**|(% style="width:55px" %)2 bits|(% style="width:47px" %)1bit|(% style="width:140px" %)5 bits
241 +|(% style="width:79px" %)**Value**|(% style="width:55px" %)[[MOD>>path:#MD]]|(% style="width:47px" %)[[LON>>path:#LON]]|(% style="width:140px" %)Firmware version 
248 248  
249 -==== (% style="color:blue" %)Location info:(%%) ====
250 250  
251 -* Latitude: 02863D68  ⇒  //if (0x//02863D68//& 0x80000000 = 0 )~://  //value = 02863D68 /1000000 = 42.351976//
252 -* Longitude: FAC29BAF  ⇒ //if (0x//FAC29BAF// & 0x80000000 = 1 )~://  //value = (0x//FAC29BAF// – 0x 100000000)/1000000 =//-87.9094//57//
244 +**Example: Payload: 0x02863D68 FAC29BAF 4B45 60 0202 011A  **
253 253  
254 -(% style="color:red" %)**Important note:**
255 255  
247 +**Location info:**
248 +
249 +* Latitude: 02863D68  ⇒  //if (0x//02863D68//& 0x80000000 = 0 )~://  //value = 02863D68 /1000000 = 42.351976//
250 +* Longitude: FAC29BAF  ⇒ //if (0x//FAC29BAF// & 0x80000000 = 1 )~://  //value = (0x//FAC29BAF// – 0x 100000000)/1000000 =//-87.9094//57//
251 +
252 +
253 +**Important note:**
254 +
256 256  1.  When power is low (<2.84v), GPS won't be able to get location info and GPS feature will be disabled and the location field will be filled with 0x0FFFFFFF, 0x0FFFFFFF.
257 257  
258 258  2.  In firmware version v1.5, Roll & Pitch is disabled by default.
... ... @@ -270,20 +270,12 @@
270 270  
271 271  
272 272  
273 -==== (% style="color:blue" %)Alarm:(%%) ====
272 +* **Alarm**:  Example:  0x4B & 0x40 >> 6 = 0x01
273 +* **BAT**:  Example:  0x0CDD & 0x3FFF ⇒ 3293 (mV).
274 274  
275 +The battery info shows the current voltage, for **TrackerD** version which powered by li-on battery. User can use below mapping to indicate the battery in percentage: \
275 275  
276 -Example:  0x4B & 0x40 >> 6 = 0x01
277 277  
278 -
279 -==== (% style="color:blue" %)BAT:(%%) ====
280 -
281 -
282 -Example:  0x0CDD & 0x3FFF ⇒ 3293 (mV).
283 -
284 -The battery info shows the current voltage, for (% style="color:blue" %)**TrackerD**(%%) version which powered by li-on battery. User can use below mapping to indicate the battery in percentage: \
285 -
286 -
287 287  * > 4.0v :  80% ~~ 100%
288 288  * 3.85v ~~3.99v:  60% ~~ 80%
289 289  * 3.70v ~~ 3.84v:  40% ~~ 60%
... ... @@ -290,28 +290,22 @@
290 290  * 3.40v ~~ 3.69v:  20% ~~ 40%
291 291  * < 3.39v:  0~~20%
292 292  
293 -==== (% style="color:blue" %)LON:(%%) ====
294 294  
295 -
296 -Enable/Disable LED activity for uplink
297 297  
286 +* **LON: **Enable/Disable LED activity for uplink
287 +
298 298  0x00:  Disable LED indicator.
299 299  
300 300  0x01:  Enable LED indicator (Default Value)
301 301  
302 302  
303 -==== (% style="color:blue" %)Hum:(%%) ====
293 +* **Hum**: 0202 = //if (0x0202 & 0x8000 = 0 ):  value =// 0x0202 / 100 = +514 ⇒ 51.4 degree
294 +* **//Tem//**//: 011A =if (0x011A & 0x8000 = 1 ):  value =( 0x011A - 0x10000)/10(dec) ⇒ -//28.2 degree
304 304  
305 -0202 = //if (0x0202 & 0x8000 = 0 ):  value =// 0x0202 / 100 = +514 ⇒ 51.4 degree
306 306  
307 307  
308 -==== (% style="color:blue" %)Tem:(%%) ====
309 309  
310 -011A =if (0x011A & 0x8000 = 1 ):  value =( 0x011A - 0x10000)/10(dec) ⇒ -//28.2 degree//
311 311  
312 -
313 -
314 -
315 315  === 2.3.3 Uplink FPORT~= , History GNSS Positioning ===
316 316  
317 317  
... ... @@ -323,46 +323,59 @@
323 323  
324 324  **MODE=2**
325 325  
326 -(% border="2" style="background-color:#ffffcc; color:green; width:491px" %)
311 +(% border="2" style="background-color:#ffffcc; color:green; width:620px" %)
327 327  |(% style="width:70px" %)(((
328 328  **Size**
329 329  
330 330  **(bytes)**
331 -)))|(% style="width:44px" %)16|(% style="width:61px" %)4|(% style="width:63px" %)4|(% style="width:71px" %)2|(% style="width:50px" %)4|(% style="width:47px" %)2|(% style="width:15px" %)1
332 -|(% style="width:70px" %)**Value**|(% style="width:44px" %)[[UUID>>||anchor="HLocationinfo:"]]|(% style="width:61px" %)(((
333 -iBeacon MAJOR
334 -)))|(% style="width:63px" %)(((
335 -iBeacon MINOR
316 +)))|(% style="width:54px" %)16|(% style="width:72px" %)4|(% style="width:71px" %)4|(% style="width:145px" %)2|(% style="width:72px" %)4|(% style="width:76px" %)2|(% style="width:54px" %)1
317 +|(% style="width:70px" %)**Value**|(% style="width:54px" %)[[UUID>>path:#Location]]|(% style="width:72px" %)(((
318 +iBeacon
319 +
320 +MAJOR
336 336  )))|(% style="width:71px" %)(((
337 -iBeacon Measured Power
338 -)))|(% style="width:50px" %)(((
339 -iBeacon RSSI
340 -)))|(% style="width:47px" %)(((
341 -[[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
342 -)))|(% style="width:15px" %)[[FLAG>>||anchor="HFLAG:"]]
322 +iBeacon
343 343  
324 +MINOR
325 +)))|(% style="width:145px" %)(((
326 +iBeacon Measured
327 +
328 +Power
329 +)))|(% style="width:72px" %)(((
330 +iBeacon
331 +
332 +RSSI
333 +)))|(% style="width:76px" %)(((
334 +[[Alarm &>>path:#Alarm]]
335 +
336 +[[BAT>>path:#Alarm]]
337 +)))|(% style="width:54px" %)[[FLAG>>path:#Flag]]
338 +
344 344  [[image:1664502425687-834.png]]
345 345  
346 346  
347 -* (% style="color:#037691" %)**BAT: ** (%%) Ex1: 0x4B45 & 0x3FFF ⇒ 3901 (mV).
348 -* (% style="color:#037691" %)**MODE:   **(%%)Define the payload format.
349 -* (% style="color:#037691" %)**UUID:     **(%%)The uuid from the strongest iBeacon.
350 -* (% style="color:#037691" %)**MAJOR:** (%%) The MAJOR from the strongest iBeacon.
351 -* (% style="color:#037691" %)**MINOR:**  (%%)The MAJOR from the strongest iBeacon.
352 -* (% style="color:#037691" %)**Measured Power: ** (%%) The Measured Power from the strongest iBeacon.
353 -* (% style="color:#037691" %)**RSSI:  ** (%%) The RSSI from the strongest iBeacon.
342 +* **BAT**:  Ex1: 0x4B45 & 0x3FFF ⇒ 3901 (mV).
343 +* **MODE:  **Define the payload format.
344 +* **UUID:  **The uuid from the strongest iBeacon.
345 +* **MAJOR**:  The MAJOR from the strongest iBeacon.
346 +* **MINOR**:  The MAJOR from the strongest iBeacon.
347 +* **Measured** **Power**:  The Measured Power from the strongest iBeacon.
348 +* **RSSI**:  The RSSI from the strongest iBeacon.
354 354  
350 +
351 +
352 +
353 +
355 355  === 2.3.5 Add Payload format in TTN V3 ===
356 356  
357 357  
358 358  In TTN V3, use can add a custom payload so it shows friendly.
359 359  
360 -In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**
359 +In the page Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder
361 361  
362 362  
363 363  [[image:1664502649601-895.png]]
364 364  
365 -
366 366  Add the decoder from this link:
367 367  
368 368  
... ... @@ -399,10 +399,10 @@
399 399  == 2.6 Alarm Mode ==
400 400  
401 401  
402 -User can push the (% style="color:red" %)**RED button**(%%) by more than 5 seconds to enter Alarm Mode.
400 +User can push the **RED button** by more than 5 seconds to enter Alarm Mode.
403 403  
404 404  
405 -Once enter Alarm mode, the (% style="color:green" %)**GREEN LED**(%%) will flash 3 times, the buzzer will alarm for 5 seconds, then TrackerD will immediately send a packet without location info and then send a data packet with GPS positioning information. After that, the device will send 60 packets at 1-minute intervals. The Alarm flag in the payload will be set for the next 60 packets unless exit alert mode.
403 +Once enter Alarm mode, the **GREEN LED** will flash 3 times, the buzzer will alarm for 5 seconds, then TrackerD will immediately send a packet without location info and then send a data packet with GPS positioning information. After that, the device will send 60 packets at 1-minute intervals. The Alarm flag in the payload will be set for the next 60 packets unless exit alert mode.
406 406  
407 407  
408 408  Two ways to exit alarm mode:
... ... @@ -410,7 +410,7 @@
410 410  * Server send a downlink command to exit.
411 411  * User fast press the RED button 10 times.
412 412  
413 -When exit alarm mode, (% style="color:red" %)**RED LED**(%%) will light up for 5 seconds, indicating that the alarm mode is exited. And the alert flag will be set to false.
411 +When exit alarm mode, **RED LED** will light up for 5 seconds, indicating that the alarm mode is exited. And the alert flag will be set to false.
414 414  
415 415  
416 416  
... ... @@ -423,22 +423,25 @@
423 423  
424 424  (% border="2" style="background-color:#ffffcc; color:green; width:636px" %)
425 425  |(% style="width:157px" %)**Event**|(% style="width:271px" %)**Action**|(% style="width:202px" %)**AT+LON to control on/off**
426 -|(% style="width:157px" %)**Power On**|(% style="width:271px" %)(% style="color:blue" %)**BLUE, **(% style="color:red" %)**RED , **(% style="color:green" %)**Green** flash once|(% style="width:202px" %)N/A
427 -|(% style="width:157px" %)**Join request**|(% style="width:271px" %)(% style="color:green" %)**Green** (%%)led fast blink once (200ms)|(% style="width:202px" %)Yes
428 -|(% style="width:157px" %)**Join Success**|(% style="width:271px" %)(% style="color:green" %)**Green**(%%) led on 5 second|(% style="width:202px" %)N/A
429 -|(% style="width:157px" %)**Fixing Location**|(% style="width:271px" %)(% style="color:blue" %)**BLUE **(%%)blinks 200ms per second|(% style="width:202px" %)Yes
430 -|(% style="width:157px" %)**Fixed and uplink**|(% style="width:271px" %)(% style="color:green" %)**GREEN ***(%%)***blinks twice (200ms per blink)**|(% style="width:202px" %)Yes
431 -|(% style="width:157px" %)**Fail Fix and uplink**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)blinks twice (200ms per blink)|(% style="width:202px" %)Yes
432 -|(% style="width:157px" %)**Enter Alarm mode**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)on for 3 seconds|(% style="width:202px" %)Yes
433 -|(% style="width:157px" %)**Uplink under Alarm**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)on for 1 second|(% style="width:202px" %)Yes
434 -|(% style="width:157px" %)**Exit Alarm**|(% style="width:271px" %)(% style="color:blue" %)**BLUE **(%%)led on 5 second|(% style="width:202px" %)Yes
435 -|(% style="width:157px" %)**Get Downlink**|(% style="width:271px" %)(% style="color:green" %)**GREEN**(%%) led on 1 second|(% style="width:202px" %)Yes
436 -|(% style="width:157px" %)**Movement Detect**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)led on 500ms|(% style="width:202px" %)N/A
424 +|(% style="width:157px" %)**Power On**|(% style="width:271px" %)**BLUE, RED , Green** flash once|(% style="width:202px" %)N/A
425 +|(% style="width:157px" %)**Join request**|(% style="width:271px" %)**Green** led fast blink once (200ms)|(% style="width:202px" %)Yes
426 +|(% style="width:157px" %)**Join Success**|(% style="width:271px" %)**Green** led on 5 second|(% style="width:202px" %)N/A
427 +|(% style="width:157px" %)**Fixing Location**|(% style="width:271px" %)**BLUE **blinks 200ms per second|(% style="width:202px" %)Yes
428 +|(% style="width:157px" %)**Fixed and uplink**|(% style="width:271px" %)**GREEN **blinks twice (200ms per blink)|(% style="width:202px" %)Yes
429 +|(% style="width:157px" %)**Fail Fix and uplink**|(% style="width:271px" %)**RED **blinks twice (200ms per blink)|(% style="width:202px" %)Yes
430 +|(% style="width:157px" %)**Enter Alarm mode**|(% style="width:271px" %)**RED **on for 3 seconds|(% style="width:202px" %)Yes
431 +|(% style="width:157px" %)**Uplink under Alarm**|(% style="width:271px" %)**RED **on for 1 second|(% style="width:202px" %)Yes
432 +|(% style="width:157px" %)**Exit Alarm**|(% style="width:271px" %)**BLUE **led on 5 second|(% style="width:202px" %)Yes
433 +|(% style="width:157px" %)**Get Downlink**|(% style="width:271px" %)**GREEN** led on 1 second|(% style="width:202px" %)Yes
434 +|(% style="width:157px" %)**Movement Detect**|(% style="width:271px" %)**RED **on 500ms|(% style="width:202px" %)N/A
437 437  
436 +
437 +
438 +
438 438  == 2.9 Button Function ==
439 439  
440 440  
441 -(% style="color:green" %)**RESET button:**
442 +**RESET button:**
442 442  
443 443  [[image:1664502835802-546.png]]
444 444  
... ... @@ -445,7 +445,7 @@
445 445  Push this button will reboot the device. Device will exit alarm mode and re-join to LoRaWAN server.
446 446  
447 447  
448 -(% style="color:red" %)**RED button:**
449 +**RED button:**
449 449  
450 450  [[image:1664502854406-763.png]]
451 451  
... ... @@ -452,11 +452,12 @@
452 452  
453 453  (% border="2" style="background-color:#ffffcc; color:green; width:627px" %)
454 454  |(% style="width:135px" %)**Function**|(% style="width:220px" %)**Action**|(% style="width:265px" %)**Description**
455 -|(% style="width:135px" %)Send Alarm|(% style="width:220px" %)Keep Pressing (% style="color:red" %)**RED**(%%) button for more than 5 seconds|(% style="width:265px" %)Enter Alarm Mode.  See [[Alarm Mode>>||anchor="H2.6AlarmMode"]]
456 -|(% style="width:135px" %)Exit Alarm Mode|(% style="width:220px" %)Fast press the (% style="color:red" %)**RED** (%%)button 10 times|(% style="width:265px" %)Exit Alarm Mode
456 +|(% style="width:135px" %)Send Alarm|(% style="width:220px" %)Keep Pressing **RED** button for more than 5 seconds|(% style="width:265px" %)Enter Alarm Mode.  See [[Alarm Mode>>path:#Alarm_Mode]]
457 +|(% style="width:135px" %)Exit Alarm Mode|(% style="width:220px" %)Fast press the **RED** button 10 times|(% style="width:265px" %)Exit Alarm Mode
457 457  |(% style="width:135px" %)Enter Deep Sleep Mode|(% style="width:220px" %)Press and hold the button for 10 seconds, then quickly press the device 3 times to enter deep sleep|(% style="width:265px" %)This is the mode ship out from factory. CPU will be complete in sleep mode and no LoRa activity, only use before deploy.
458 458  
459 459  
461 +
460 460  == 2.10 USB Port Function ==
461 461  
462 462  
... ... @@ -464,16 +464,18 @@
464 464  
465 465  * Power on the device
466 466  * Recharge the battery
467 -* [[Configure Device>>||anchor="H3.ConfigureTrackerDviaATcommandorLoRaWANdownlink"]]
468 -* [[Upgrade Firmware>>||anchor="H5.UploadFirmware"]]
469 +* [[Configure Device>>path:#AT_Command]]
470 +* [[Upgrade Firmware>>path:#upgrade_image]]
469 469  
470 470  
473 +
474 +
471 471  = 3. Configure TrackerD via AT command or LoRaWAN downlink =
472 472  
473 473  
474 474  User can configure TrackerD via AT Command or LoRaWAN Downlink.
475 475  
476 -LoRaWAN Downlink instruction for different platforms:  [[IoT LoRaWAN Server>>doc:Main.WebHome]]
480 +LoRaWAN Downlink instruction for different platforms: [[IoT LoRaWAN Server>>url:http://wiki.dragino.com/xwiki/bin/view/Main/]]
477 477  
478 478  
479 479  
... ... @@ -486,7 +486,7 @@
486 486  [[image:1664502999401-486.png]]
487 487  
488 488  
489 -In PC, User needs to set serial tool baud rate to (% style="color:green" %)**115200**(%%) to access serial console for TrackerD. TrackerD will output system info once power on and user will be able to send AT commands:
493 +In PC, User needs to set serial tool baud rate to **115200** to access serial console for TrackerD. TrackerD will output system info once power on and user will be able to send AT commands:
490 490  
491 491  
492 492  [[image:1664503022490-662.png]]
... ... @@ -509,16 +509,16 @@
509 509  
510 510  Set device uplink interval.
511 511  
512 -* (% style="color:blue" %)**AT Command:**
516 +* AT Command:
513 513  
514 -(% style="color:#037691" %)**AT+TDC=xxx **
518 +AT+TDC=xxx
515 515  
516 516  Example:  AT+TDC=300000. Means set interval to 5 minutes(300 seconds)
517 517  
518 518  
519 -* (% style="color:blue" %)**Downlink Payload (prefix 0x01):**
523 +* Downlink Payload (prefix 0x01):
520 520  
521 -(% style="color:#037691" %)**0x01 00 01 2C**  (%%) ~/~/  Same as AT+TDC=300000
525 +0x01 00 01 2C     ~/~/  Same as AT+TDC=300000
522 522  
523 523  
524 524  
... ... @@ -527,16 +527,16 @@
527 527  
528 528  Set alarm packet transmit interval
529 529  
530 -* (% style="color:blue" %)**AT Command:**
534 +* AT Command:
531 531  
532 -(% style="color:#037691" %)**AT+ATDC=xx. **
536 +AT+ATDC=xx.
533 533  
534 -Example:  AT+ATDC=60000  **~-~->    ** Set Alarm Packet Interval to 60 seconds. TrackerD will send every 60 seconds in Alarm mode, Default Value: 60000
538 +Example:  AT+ATDC=60000  **~-~->  ** Set Alarm Packet Interval to 60 seconds. TrackerD will send every 60 seconds in Alarm mode, Default Value: 60000
535 535  
536 536  
537 -* (% style="color:blue" %)**Downlink Payload (prefix 0xB1):**
541 +* Downlink Payload (prefix 0xB1):
538 538  
539 -(% style="color:#037691" %)**0xB1 00 00 3C ** (%%) ~/~/  Same as AT+ATDC=60000
543 +0xB1 00 00 3C  ~/~/  Same as AT+ATDC=60000
540 540  
541 541  
542 542  
... ... @@ -545,16 +545,16 @@
545 545  
546 546  Set sports packet transmit interval
547 547  
548 -* (% style="color:blue" %)**AT Command:**
552 +* AT Command:
549 549  
550 -(% style="color:#037691" %)**AT+MTDC=xx. **
554 +AT+MTDC=xx.
551 551  
552 - Example:  AT+MTDC=300000  **~-~->    ** Set Sports Mode Packet Interval to 300 seconds. TrackerD will send every 300 seconds in Sports mode, Default Value: 300000
556 + Example:  AT+MTDC=300000  **~-~->  ** Set Sports Mode Packet Interval to 300 seconds. TrackerD will send every 300 seconds in Sports mode, Default Value: 300000
553 553  
554 554  
555 -* (% style="color:blue" %)**Downlink Payload (prefix 0x03):**
559 +* Downlink Payload (prefix 0x03):
556 556  
557 -(% style="color:#037691" %)**0x03 00 01 2C**  (%%) ~/~/  Same as AT+ MTDC=3000000
561 +0x03 00 01 2C  ~/~/  Same as AT+ MTDC=3000000
558 558  
559 559  
560 560  
... ... @@ -563,29 +563,32 @@
563 563  
564 564  Server send downlink command to exit Alarm mode
565 565  
566 -* (% style="color:blue" %)**AT Command: No AT Command**
570 +* AT Command:
567 567  
568 -* (% style="color:blue" %)**Downlink Payload (prefix 0x02):**
572 +No AT Command
569 569  
570 -(% style="color:#037691" %)**0x02 01**    (%%) ~/~/  Exit Alarm Mode
571 571  
575 +* Downlink Payload (prefix 0x02):
572 572  
577 +0x02 01  ~/~/  Exit Alarm Mode
573 573  
579 +
580 +
574 574  === 3.2.5 Disable/Enable LED flash ===
575 575  
576 576  
577 577  Disable/Enable LED for position, downlink and uplink
578 578  
579 -* (% style="color:blue" %)**AT Command:**
586 +* AT Command:
580 580  
581 -(% style="color:#037691" %)**AT+LON=xx.  (Disable (0), Enable (1), default:1)**
588 +AT+LON=xx.  (Disable (0), Enable (1), default:1)
582 582  
583 583   Example: AT+LON=0  **~-~-> ** Disable LED for position, downlink and uplink.
584 584  
585 585  
586 -* (% style="color:blue" %)**Downlink Payload (prefix 0xAE):**
593 +* Downlink Payload (prefix 0xAE):
587 587  
588 -(% style="color:#037691" %)**0xAE 00 ** (%%) ~/~/  Same as AT+LON=0
595 +0xAE 00  ~/~/  Same as AT+LON=0
589 589  
590 590  
591 591  
... ... @@ -594,16 +594,16 @@
594 594  
595 595  User can use this feature to check and set thread hole of movement detect
596 596  
597 -* (% style="color:blue" %)**AT Command:**
604 +* AT Command:
598 598  
599 -(% style="color:#037691" %)**AT+INTWK=xx.  (Disable (0), Enable (1), default:0)**
606 +AT+INTWK=xx.  (Disable (0), Enable (1), default:0)
600 600  
601 - Example:  AT+ INTWK =1  **~-~->   ** Enable detect movement.
608 + Example:  AT+ INTWK =1  **~-~->  ** Enable detect movement.
602 602  
603 603  
604 -* (% style="color:blue" %)**Downlink Payload (prefix 0xAF):**
611 +* Downlink Payload (prefix 0xAF):
605 605  
606 -(% style="color:#037691" %)**0xAF 01 ** (%%) ~/~/  Same as AT+ INTWK =1
613 +0xAF 01  ~/~/  Same as AT+ INTWK =1
607 607  
608 608  
609 609  
... ... @@ -622,9 +622,9 @@
622 622  
623 623  
624 624  
625 -* (% style="color:blue" %)**AT Command:**
632 +* AT Command:
626 626  
627 -(% style="color:#037691" %)**AT+SMOD=xx. **
634 +AT+SMOD=xx.
628 628  
629 629  
630 630   **Example:**
... ... @@ -636,9 +636,9 @@
636 636   AT+ SMOD =2,3    **~-~->**  (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State。
637 637  
638 638  
639 -* (% style="color:blue" %)**Downlink Payload (prefix 0xA5):**
646 +* Downlink Payload (prefix 0xA5):
640 640  
641 -(% style="color:#037691" %)**0xA5 01 00**    (%%) ~/~/  Same as AT+ SMOD =1,0
648 +0xA5 01 00  ~/~/  Same as AT+ SMOD =1,0
642 642  
643 643  
644 644  
... ... @@ -651,16 +651,16 @@
651 651  If AT+FTIME=0. The GPS module will be always powered and positioning. This will highly increase the power consumption (up to 50mA). When AT+FTIME=0, it will improve fix accuracy and shorten the acquire time for next uplink.
652 652  
653 653  
654 -* (% style="color:blue" %)**AT Command:**
661 +* AT Command:
655 655  
656 -(% style="color:#037691" %)**AT+FTIME=xx**  (%%) **~-~-> ** Set to use xx as max fix time.
663 +AT+FTIME=xx  **~-~-> ** Set to use xx as max fix time.
657 657  
658 658  Example:  AT+FTIME=150
659 659  
660 660  
661 -* (% style="color:blue" %)**Downlink Payload (prefix 0xAA):**
668 +* Downlink Payload (prefix 0xAA):
662 662  
663 -(% style="color:#037691" %)**0xAA 00 96 ** (%%) ~/~/  Set AT+FTIME=150
670 +0xAA 00 96  ~/~/  Set AT+FTIME=150
664 664  
665 665  
666 666  
... ... @@ -673,38 +673,37 @@
673 673  A GPS packet with lower PDOP has higher accuracy. PDOP default value is 2.0
674 674  
675 675  
676 -* (% style="color:blue" %)**AT Command:**
683 +* AT Command:
677 677  
678 -(% style="color:#037691" %)**AT+PDOP=2.5 ** (%%) **~-~->  ** Set PDOP to 2.5
685 +AT+PDOP=2.5  **~-~->  ** Set PDOP to 2.5
679 679  
680 680  
681 -* (% style="color:blue" %)**Downlink Payload (prefix 0xAD):**
688 +* Downlink Payload (prefix 0xAD):
682 682  
683 -(% style="color:#037691" %)**0xAD 00 0A**   (%%) ~/~/  Set AT+PDOP=1  (0x0A / 10 =1)
690 +0xAD 00 0A  ~/~/  Set AT+PDOP=1  (0x0A / 10 =1)
684 684  
685 -(% style="color:#037691" %)**0xAD 00 19**   (%%) ~/~/  Set AT+PDOP=2.5    (0x19 / 10 =2.5)
692 +0xAD 00 19  ~/~/  Set AT+PDOP=2.5    (0x19 / 10 =2.5)
686 686  
687 -(% style="color:#037691" %)**0xAD 00 46**    (%%) ~/~/  Set AT+PDOP=7  (0x46 / 10 =7)
694 +0xAD 00 46  ~/~/  Set AT+PDOP=7  (0x46 / 10 =7)
688 688  
689 689  
690 -
691 691  Disable/Enable the confirmation mode
692 692  
693 -* (% style="color:blue" %)**AT Command:**
699 +* AT Command:
694 694  
695 -(% style="color:#037691" %)**AT+CFM=xx. **
701 +AT+CFM=xx.
696 696  
697 697  
698 698  **~ Example:**
699 699  
700 - AT+ CFM=0    **~-~->   ** Disable confirmation
706 + AT+ CFM=0    **~-~->  ** Disable confirmation
701 701  
702 702   AT+ CFM=1    **~-~->  ** Enable confirmation
703 703  
704 704  
705 -* (% style="color:blue" %)**Downlink Payload (prefix 0x05):**
711 +* Downlink Payload (prefix 0x05):
706 706  
707 -(% style="color:#037691" %)**0x05 01 **(%%) ~/~/  Same as AT+ SMOD =1
713 +0x05 01  ~/~/  Same as AT+ SMOD =1
708 708  
709 709  
710 710  
... ... @@ -736,9 +736,11 @@
736 736  After installation of the driver and plug in TrackerD, user should be able to see com port in PC's device manager.
737 737  
738 738  
739 -(% style="color:blue" %)**Step3：**(%%) Download and Install Flash Tool:  [[https:~~/~~/www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools>>url:https://www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools]]
745 +(% style="color:blue" %)**Step3：**(%%) Download and Install Flash Tool:
740 740  
747 +[[https:~~/~~/www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools>>url:https://www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools]]
741 741  
749 +
742 742  (% style="color:blue" %)**Step4:** (%%) Run Flash Download Tool and configure chip type to ESP32
743 743  
744 744  
... ... @@ -781,14 +781,16 @@
781 781  
782 782  * Download the latest Arduino software (IDE) from the Arduino official website:  [[https:~~/~~/www.arduino.cc/en/Main/Software>>url:https://www.arduino.cc/en/Main/Software]]
783 783  
784 -Install IDE on PC, open and click (% style="color:#037691" %)**File ~-~-> Preference**,(%%) add the following URL:  [[https:~~/~~/dl.espressif.com/dl/package_esp32_index.json>>url:https://links.jianshu.com/go?to=https%3A%2F%2Fdl.espressif.com%2Fdl%2Fpackage_esp32_index.json]]
792 +Install IDE on PC, open and click **File ~-~-> Preference**, add the following URL:  [[https:~~/~~/dl.espressif.com/dl/package_esp32_index.json>>url:https://links.jianshu.com/go?to=https%3A%2F%2Fdl.espressif.com%2Fdl%2Fpackage_esp32_index.json]]
785 785  
786 786  
787 787  [[image:1664503635019-941.png]]
788 788  
789 789  
790 -* (% style="color:#037691" %)**Go to tools ~-~-> Boards ~-~-> Boards Manager**,(%%) find the esp32 information and install it.
798 +* Go to tools ~-~-> Boards ~-~-> Boards Manager, find the esp32 information and install it.
791 791  
800 +
801 +
792 792  [[image:1664503715811-892.png]]
793 793  
794 794  
... ... @@ -795,6 +795,7 @@
795 795  
796 796  * Download the latest TrackerD from the dragino github: [[https:~~/~~/github.com/dragino/TrackerD>>url:https://github.com/dragino/TrackerD]]
797 797  
808 +
798 798  Put the Library in the TrackerD directory into the libraries file in the Arduino directory:
799 799  
800 800  
... ... @@ -805,19 +805,19 @@
805 805  == 6.2 Source Code ==
806 806  
807 807  
808 -* (% style="color:blue" %)**Open the example in the TrackerD file, please select the correct port in the IDE, as shown below:**
819 +* Open the example in the TrackerD file, please select the correct port in the IDE, as shown below:
809 809  
810 810  [[image:1664503794261-827.png]]
811 811  
812 812  
813 813  
814 -* (% style="color:blue" %)**Click to upload**
825 +* Click to upload
815 815  
816 816  [[image:1664503808294-336.png]]
817 817  
818 818  
819 819  
820 -* (% style="color:blue" %)**Check the result, if the upload is successful, as shown below, open the serial port to view the data**
831 +* Check the result, if the upload is successful, as shown below, open the serial port to view the data
821 821  
822 822  [[image:1664503824081-592.png]] [[image:1664503831430-500.png]]
823 823  
... ... @@ -829,7 +829,7 @@
829 829  == 7.1 How to change the LoRa Frequency Bands/Region? ==
830 830  
831 831  
832 -User can follow the introduction for [[how to upgrade image>>||anchor="H5.UploadFirmware"]]. When download the images, choose the required image file for download.
843 +User can follow the introduction for [[how to upgrade image>>path:#upgrade_image]]. When download the images, choose the required image file for download.
833 833  
834 834  
835 835  
... ... @@ -851,6 +851,10 @@
851 851  |(% style="width:118px" %)A8|(% style="width:67px" %)Yellow|(% style="width:123px" %)MTMS/GPIO14
852 852  |(% style="width:118px" %)B8|(% style="width:67px" %)Grey|(% style="width:123px" %)MTDO/GPIO15
853 853  
865 +
866 +
867 +
868 +
854 854  = 8.  Order Info =
855 855  
856 856  
... ... @@ -866,6 +866,10 @@
866 866  * (% style="color:red" %)**AU915**(%%): Default frequency band AU915
867 867  * (% style="color:red" %)**US915**(%%): Default frequency band US915
868 868  
884 +
885 +
886 +
887 +
869 869  = 9.  Packing Info =
870 870  
871 871  
... ... @@ -879,6 +879,9 @@
879 879  * Device Size: 85 x 48 x 15 cm
880 880  * Weight: 50g
881 881  
901 +
902 +
903 +
882 882  = 10. Support =
883 883  
884 884  
... ... @@ -885,6 +885,9 @@
885 885  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
886 886  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]]
887 887  
910 +
911 +
912 +
888 888  = 11.  Reference =
889 889  
890 890  

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0