Last modified by Xiaoling on 2025/04/14 16:33
<
From version < 51.15 >
edited by Xiaoling
on 2022/09/30 13:41
To version < 55.1 >
edited by Edwin Chen
on 2022/10/06 18:45
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -1,3 +1,5 @@
1 +== ==
2 +
1 1  (% style="text-align:center" %)
2 2  [[image:1664505654417-133.png]]
3 3  
... ... @@ -25,10 +25,14 @@
25 25  (((
26 26  In TrackerD, there are various sensors such as GPS, WiFi, BLE, Temperature, Humidity, Motion Detection, and Buzzer. User can use TrackerD for different tracking scenario.
27 27  
30 +(((
28 28  TrackerD is program friendly. Developers can use Arduino IDE to customize the software of TrackerD to fit their IoT solution.
32 +)))
29 29  
34 +(((
30 30  The LoRa wireless technology used in TrackerD allows the user to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional tracking services.
31 31  )))
37 +)))
32 32  
33 33  (((
34 34  TrackerD is equipped with a (% style="color:blue" %)**1000mAh Li-on rechargeable battery**(%%). Each TrackerD has a worldwide unique OTAA keys to join the LoRaWAN network.
... ... @@ -99,7 +99,7 @@
99 99  * LoRaWAN 1.0.3 Class A
100 100  * ESP32 PICO D4
101 101  * SX1276/78 Wireless Chip
102 -* Arduino IDE Compatible
108 +* Arduino IDE Compatible
103 103  * Open source hardware / software
104 104  * Regular/ Real-time GPS,BLE,WIFI tracking
105 105  * Built-in3 axis accelerometer (LIS3DH)
... ... @@ -179,14 +179,15 @@
179 179  (% style="color:blue" %)**Step 3:**(%%) TrackerD will auto join to the LoRaWAN network. After join success, TrackerD will start to upload message to IoT server.
180 180  
181 181  
182 -(% style="color:blue" %)**Positioning Mode(SMOD):**
188 +== 2.3 Positioning Mode(SMOD) ==
183 183  
184 -* (% style="color:#037691" %)**GPS ONLY(Factory Settings):    **(%%)only get GPS location info.
185 -* (% style="color:#037691" %)**BLE ONLY:              **(%%)Only obtain iBeacon info via BLE. Design for Indoor tracking.
186 -* (% style="color:#037691" %)**GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.
190 +Users can set TrackerD to different Positioning Mode for different applications. Below mod are supported.
187 187  
188 -User can switch modes by [[changing SMOD>>||anchor="H3.2.7SetPositioningMode"]].
192 +* (% style="color:#037691" %)**GPS ONLY(Factory Settings):    **(%%)only get and uplink GPS location info.
193 +* (% style="color:#037691" %)**BLE ONLY:              **(%%)Only obtain iBeacon info via BLE and uplink. Design for Indoor tracking.
194 +* (% style="color:#037691" %)**GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.Devices will try to search BLE iBeacon first. If device can't find the iBeacon, it will use GPS for positioning.
189 189  
196 +Users can switch modes by [[changing SMOD>>||anchor="H3.2.7SetPositioningMode"]].
190 190  
191 191  
192 192  == 2.3 Uplink Payload ==
... ... @@ -194,51 +194,87 @@
194 194  
195 195  === 2.3.1 Uplink FPORT~=5, Device Status ===
196 196  
204 +Uplink the device configures with FPORT=5. Once LHT52 Joined the network, it will uplink this message to the server. After first uplink, LHT52 will uplink Device Status every 12 hours.
197 197  
206 +|=**Size (bytes)**|=**1**|=**2**|=**1**|=**1**|=**2**
207 +|**Value**|Sensor Model|Firmware Version|Frequency Band|Sub-band|BAT
198 198  
199 -=== 2.3.2 Uplink FPORT~= , Realtime GNSS Positioning ===
209 +[[image:image-20221006181357-2.png]]
200 200  
211 +Example Payload (FPort=5):  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT52%20-%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220621105116-11.png?rev=1.1||alt="image-20220621105116-11.png"]]
201 201  
202 -The default uplink payload includes totally 11 bytes. (User can use AT+MOD=0 to enable the Temperature and humidity sensor to hum/tem info from accelerometer. When accelerometer info is enable, total payload will be 15 bytes, please note 15 bytes won't work on DR0 on US915/AU915 frequency band. )
213 +**Sensor Model**: For TrackerD, this value is 0x13.
203 203  
215 +**Firmware Version**: 0x0100, Means: v1.0.0 version.
204 204  
205 -(% border="2" style="background-color:#ffffcc; color:green; width:537px" %)
206 -|(% style="width:69px" %)(((
207 -**Size**
217 +**Frequency Band**:
208 208  
209 -**(bytes)**
210 -)))|(% style="width:76px" %)4|(% style="width:87px" %)4|(% style="width:76px" %)2|(% style="width:52px" %)1|(% style="width:88px" %)(((
211 -2
219 +*0x01: EU868
212 212  
213 -(optional )
214 -)))|(% style="width:83px" %)(((
215 -2
221 +*0x02: US915
216 216  
217 -(optional)
223 +*0x03: IN865
224 +
225 +*0x04: AU915
226 +
227 +*0x05: KZ865
228 +
229 +*0x06: RU864
230 +
231 +*0x07: AS923
232 +
233 +*0x08: AS923-1
234 +
235 +*0x09: AS923-2
236 +
237 +*0x0a: AS923-3
238 +
239 +**Sub-Band**: value 0x00 ~~ 0x08(only for CN470, AU915,US915. Others are0x00)
240 +
241 +**BAT**: shows the battery voltage for TrackerD.
242 +
243 +Ex1: 0x0B3A = 2874mV
244 +
245 +Use can also get the Device Status uplink through the downlink command:
246 +
247 +
248 +=== 2.3.2 Uplink FPORT~=2, Realtime GNSS Positioning ===
249 +
250 +
251 +The default uplink payload includes totally 11 bytes. (User can use AT+SMOD=1,0 to enable uploading on-board Temperature and humidity value, and total payload will be 15 bytes, please note 15 bytes won't work on DR0 on US915/AU915 frequency band. )
252 +
253 +
254 +(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:480px" %)
255 +|=(% scope="row" style="width: 50px;" %)(((
256 +**Size(bytes)**
257 +)))|(% style="width:60px" %)4|(% style="width:70px" %)4|(% style="width:80px" %)2|(% style="width:50px" %)1|(% style="width:88px" %)(((
258 +2(optional)
259 +)))|(% style="width:87px" %)(((
260 +2(optional)
218 218  )))
219 -|(% style="width:69px" %)**Value**|(% style="width:76px" %)[[Latitude>>||anchor="HLocationinfo:"]]|(% style="width:87px" %)[[Longitude>>||anchor="HLocationinfo:"]]|(% style="width:76px" %)(((
262 +|=(% style="width: 69px;" %)**Value**|(% style="width:76px" %)[[Latitude>>||anchor="HLocationinfo:"]]|(% style="width:87px" %)[[Longitude>>||anchor="HLocationinfo:"]]|(% style="width:76px" %)(((
220 220  [[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
221 -)))|(% style="width:52px" %)[[FLAG>>||anchor="HFLAG:"]]|(% style="width:88px" %)[[Hum>>||anchor="HHum:"]]|(% style="width:83px" %)[[Tem>>||anchor="HTem:"]]
264 +)))|(% style="width:52px" %)[[FLAG>>||anchor="HFLAG:"]]|(% style="width:88px" %)[[Hum>>||anchor="HHum:"]]|(% style="width:87px" %)[[Tem>>||anchor="HTem:"]]
222 222  
223 223  [[image:1664501958445-288.png]]
224 224  
225 225  
226 -==== (% style="color:blue" %)Alarm & BAT:(%%) ====
269 +==== (% style="color:blue" %)**Alarm & BAT:**(%%) ====
227 227  
228 -(% border="2" style="background-color:#ffffcc; color:green; width:329px" %)
229 -|(% style="width:72px" %)**Size(bit)**|(% style="width:67px" %)1 bit|(% style="width:118px" %)1bit|(% style="width:63px" %)14 bits
230 -|(% style="width:72px" %)**Value**|(% style="width:67px" %)reserve|(% style="width:118px" %)Alarm Indicate|(% style="width:63px" %)[[BAT>>||anchor="HBAT:"]] 
271 +(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:250px" %)
272 +|=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)1 bit|(% style="width:80px" %)1bit|(% style="width:50px" %)14bits
273 +|=(% style="width: 72px;" %)**Value**|(% style="width:67px" %)reserve|(% style="width:118px" %)Alarm Indicate|(% style="width:63px" %)[[BAT>>||anchor="HBAT:"]] 
231 231  
232 -==== (% style="color:blue" %)FLAG:(%%) ====
275 +==== (% style="color:blue" %)**FLAG:**(%%) ====
233 233  
234 -(% border="2" style="background-color:#ffffcc; color:green; width:332px" %)
235 -|(% style="width:79px" %)**Size(bit)**|(% style="width:55px" %)2 bits|(% style="width:47px" %)1bit|(% style="width:140px" %)5 bits
236 -|(% style="width:79px" %)**Value**|(% style="width:55px" %)[[MOD>>||anchor="H2.3.4BLEpositioningPayload28Fport229"]]|(% style="width:47px" %)[[LON>>||anchor="HLON:"]]|(% style="width:140px" %)Firmware version 
277 +(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:250px" %)
278 +|=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)2bits|(% style="width:50px" %)1bit|(% style="width:100px" %)5 bits
279 +|=(% style="width: 79px;" %)**Value**|(% style="width:55px" %)[[MOD>>||anchor="H3.2.7SetPositioningMode"]]|(% style="width:47px" %)[[LON>>||anchor="HLON:"]]|(% style="width:140px" %)Firmware version 
237 237  
238 238  **Example:** Payload: 0x02863D68 FAC29BAF 4B45 60 0202 011A 
239 239  
240 240  
241 -==== (% style="color:blue" %)Location info:(%%) ====
284 +==== (% style="color:blue" %)**Location info:**(%%) ====
242 242  
243 243  * Latitude: 02863D68  ⇒  //if (0x//02863D68//& 0x80000000 = 0 )~://  //value = 02863D68 /1000000 = 42.351976//
244 244  * Longitude: FAC29BAF  ⇒ //if (0x//FAC29BAF// & 0x80000000 = 1 )~://  //value = (0x//FAC29BAF// – 0x 100000000)/1000000 =//-87.9094//57//
... ... @@ -247,11 +247,9 @@
247 247  
248 248  1.  When power is low (<2.84v), GPS won't be able to get location info and GPS feature will be disabled and the location field will be filled with 0x0FFFFFFF, 0x0FFFFFFF.
249 249  
250 -2.  In firmware version v1.5, Roll & Pitch is disabled by default.
293 +2.  When enable 9-axis motion sensor, the total payload will be 15 bytes, while US915/AU915 DR0 accepts only 11 bytes payload. In this case, the payload on server will be ignore and shows as below:
251 251  
252 -3.  When enable 9-axis motion sensor, the total payload will be 15 bytes, while US915/AU915 DR0 accept only 11 bytes payload. In this case, the payload on server will be ignore and shows as below:
253 253  
254 -
255 255  [[image:1664502116362-706.png]]
256 256  
257 257  
... ... @@ -262,20 +262,19 @@
262 262  
263 263  
264 264  
265 -==== (% style="color:blue" %)Alarm:(%%) ====
306 +==== (% style="color:blue" %)**Alarm:**(%%) ====
266 266  
267 -
268 268  Example:  0x4B & 0x40 >> 6 = 0x01
269 269  
270 270  
271 -==== (% style="color:blue" %)BAT:(%%) ====
311 +==== (% style="color:blue" %)**BAT:**(%%) ====
272 272  
273 -
274 274  Example:  0x0CDD & 0x3FFF ⇒ 3293 (mV).
275 275  
315 +(((
276 276  The battery info shows the current voltage, for (% style="color:blue" %)**TrackerD**(%%) version which powered by li-on battery. User can use below mapping to indicate the battery in percentage: \
317 +)))
277 277  
278 -
279 279  * > 4.0v :  80% ~~ 100%
280 280  * 3.85v ~~3.99v:  60% ~~ 80%
281 281  * 3.70v ~~ 3.84v:  40% ~~ 60%
... ... @@ -282,28 +282,31 @@
282 282  * 3.40v ~~ 3.69v:  20% ~~ 40%
283 283  * < 3.39v:  0~~20%
284 284  
285 -==== (% style="color:blue" %)LON:(%%) ====
286 286  
287 -
326 +==== (% style="color:blue" %)**LON:**(%%) ====
327 +
288 288  Enable/Disable LED activity for uplink
289 289  
330 +(((
290 290  0x00:  Disable LED indicator.
332 +)))
291 291  
334 +(((
292 292  0x01:  Enable LED indicator (Default Value)
336 +)))
293 293  
294 294  
295 -==== (% style="color:blue" %)Hum:(%%) ====
339 +==== (% style="color:blue" %)**Hum:**(%%) ====
296 296  
297 297  0202 = //if (0x0202 & 0x8000 = 0 ):  value =// 0x0202 / 100 = +514 ⇒ 51.4 degree
298 298  
299 299  
300 -==== (% style="color:blue" %)Tem:(%%) ====
344 +==== (% style="color:blue" %)**Tem:**(%%) ====
301 301  
302 302  011A =if (0x011A & 0x8000 = 1 ):  value =( 0x011A - 0x10000)/10(dec) ⇒ -//28.2 degree//
303 303  
304 304  
305 305  
306 -
307 307  === 2.3.3 Uplink FPORT~= , History GNSS Positioning ===
308 308  
309 309  
... ... @@ -311,17 +311,13 @@
311 311  === 2.3.4 BLE positioning Payload(Fport2) ===
312 312  
313 313  
314 -Different MODE has different payload:
357 +Different MODE has different payload:  (% style="color:blue" %)**MODE=2**
315 315  
316 -**MODE=2**
317 -
318 -(% border="2" style="background-color:#ffffcc; color:green; width:491px" %)
319 -|(% style="width:70px" %)(((
320 -**Size**
321 -
322 -**(bytes)**
323 -)))|(% style="width:44px" %)16|(% style="width:61px" %)4|(% style="width:63px" %)4|(% style="width:71px" %)2|(% style="width:50px" %)4|(% style="width:47px" %)2|(% style="width:15px" %)1
324 -|(% style="width:70px" %)**Value**|(% style="width:44px" %)[[UUID>>||anchor="HLocationinfo:"]]|(% style="width:61px" %)(((
359 +(% border="1.5" cellspacing="3" style="background-color:#ffffcc; color:green; width:450px" %)
360 +|=(% scope="row" style="width: 60px;" %)(((
361 +**Size(bytes)**
362 +)))|(% style="width:30px" %)16|(% style="width:50px" %)4|(% style="width:50px" %)4|(% style="width:120px" %)2|(% style="width:50px" %)4|(% style="width:50px" %)2|(% style="width:30px" %)1
363 +|=(% style="width: 50px;" %)**Value**|(% style="width:44px" %)[[UUID>>||anchor="HLocationinfo:"]]|(% style="width:61px" %)(((
325 325  iBeacon MAJOR
326 326  )))|(% style="width:63px" %)(((
327 327  iBeacon MINOR
... ... @@ -367,9 +367,13 @@
367 367  == 2.4 Integrate with Datacake ==
368 368  
369 369  
409 +(((
370 370  After TrackerD sends data to LoRaWAN server such as TTN, use can pass the data to Datacake and plot out, currently only support GPS plot.
411 +)))
371 371  
413 +(((
372 372  Instruction is here:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20Data%20Cake/#H7.Example~~-~~-AddTrackerDGPSTrackingInDataCake>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20Data%20Cake/#H7.Example--AddTrackerDGPSTrackingInDataCake]]
415 +)))
373 373  
374 374  
375 375  [[image:1664502695771-538.png]]
... ... @@ -379,9 +379,13 @@
379 379  == 2.5 Integrate with Tago ==
380 380  
381 381  
425 +(((
382 382  After TrackerD sends data to LoRaWAN server such as TTN, use can pass the data to Datacake and plot out, currently only support GPS plot.
427 +)))
383 383  
429 +(((
384 384  Instruction is here: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Tago.IO/#H3.A0Example-CreateTrackerD2FLGT92positioningwidget>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Tago.IO/#H3.A0Example-CreateTrackerD2FLGT92positioningwidget]]
431 +)))
385 385  
386 386  
387 387  [[image:1664502715371-321.png]]
... ... @@ -391,30 +391,40 @@
391 391  == 2.6 Alarm Mode ==
392 392  
393 393  
441 +(((
394 394  User can push the (% style="color:red" %)**RED button**(%%) by more than 5 seconds to enter Alarm Mode.
443 +)))
395 395  
396 396  
446 +(((
397 397  Once enter Alarm mode, the (% style="color:green" %)**GREEN LED**(%%) will flash 3 times, the buzzer will alarm for 5 seconds, then TrackerD will immediately send a packet without location info and then send a data packet with GPS positioning information. After that, the device will send 60 packets at 1-minute intervals. The Alarm flag in the payload will be set for the next 60 packets unless exit alert mode.
448 +)))
398 398  
399 399  
451 +(((
400 400  Two ways to exit alarm mode:
453 +)))
401 401  
402 402  * Server send a downlink command to exit.
403 403  * User fast press the RED button 10 times.
404 404  
458 +(((
405 405  When exit alarm mode, (% style="color:red" %)**RED LED**(%%) will light up for 5 seconds, indicating that the alarm mode is exited. And the alert flag will be set to false.
460 +)))
406 406  
407 407  
408 408  
409 -== 2.7 Sports Mode ~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-- ==
464 +== 2.7 Sports Mode ==
410 410  
411 411  
467 +In Sports Mode, TrackerD will check if there is motion. If there is no motion, device will send uplinks every 20 minutes. If there is motion, device will send uplink every 5 minutes.
412 412  
469 +
413 413  == 2.8 LED Status ==
414 414  
415 415  
416 -(% border="2" style="background-color:#ffffcc; color:green; width:636px" %)
417 -|(% style="width:157px" %)**Event**|(% style="width:271px" %)**Action**|(% style="width:202px" %)**AT+LON to control on/off**
473 +(% border="1.5" style="background-color:#ffffcc; color:green; width:500px" %)
474 +|=(% style="width: 150px;" %)**Event**|=(% style="width: 200px;" %)**Action**|=(% style="width: 150px;" %)**AT+LON to control on/off**
418 418  |(% style="width:157px" %)**Power On**|(% style="width:271px" %)(% style="color:blue" %)**BLUE, **(% style="color:red" %)**RED , **(% style="color:green" %)**Green** flash once|(% style="width:202px" %)N/A
419 419  |(% style="width:157px" %)**Join request**|(% style="width:271px" %)(% style="color:green" %)**Green** (%%)led fast blink once (200ms)|(% style="width:202px" %)Yes
420 420  |(% style="width:157px" %)**Join Success**|(% style="width:271px" %)(% style="color:green" %)**Green**(%%) led on 5 second|(% style="width:202px" %)N/A
... ... @@ -427,11 +427,10 @@
427 427  |(% style="width:157px" %)**Get Downlink**|(% style="width:271px" %)(% style="color:green" %)**GREEN**(%%) led on 1 second|(% style="width:202px" %)Yes
428 428  |(% style="width:157px" %)**Movement Detect**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)led on 500ms|(% style="width:202px" %)N/A
429 429  
430 -
431 431  == 2.9 Button Function ==
432 432  
433 433  
434 -(% style="color:green" %)**RESET button:**
490 +(% style="color:blue" %)**RESET button:**
435 435  
436 436  [[image:1664502835802-546.png]]
437 437  
... ... @@ -443,15 +443,12 @@
443 443  [[image:1664502854406-763.png]]
444 444  
445 445  
446 -(% border="2" style="background-color:#ffffcc; color:green; width:627px" %)
447 -|(% style="width:135px" %)**Function**|(% style="width:220px" %)**Action**|(% style="width:265px" %)**Description**
502 +(% border="1.5" style="background-color:#ffffcc; color:green; width:520px" %)
503 +|=(% style="width: 100px;" %)**Function**|=(% style="width: 210px;" %)**Action**|=(% style="width: 210px;" %)**Description**
448 448  |(% style="width:135px" %)Send Alarm|(% style="width:220px" %)Keep Pressing (% style="color:red" %)**RED**(%%) button for more than 5 seconds|(% style="width:265px" %)Enter Alarm Mode.  See [[Alarm Mode>>||anchor="H2.6AlarmMode"]]
449 449  |(% style="width:135px" %)Exit Alarm Mode|(% style="width:220px" %)Fast press the (% style="color:red" %)**RED** (%%)button 10 times|(% style="width:265px" %)Exit Alarm Mode
450 450  |(% style="width:135px" %)Enter Deep Sleep Mode|(% style="width:220px" %)Press and hold the button for 10 seconds, then quickly press the device 3 times to enter deep sleep|(% style="width:265px" %)This is the mode ship out from factory. CPU will be complete in sleep mode and no LoRa activity, only use before deploy.
451 451  
452 -
453 -
454 -
455 455  == 2.10 USB Port Function ==
456 456  
457 457  
... ... @@ -462,9 +462,6 @@
462 462  * [[Configure Device>>||anchor="H3.ConfigureTrackerDviaATcommandorLoRaWANdownlink"]]
463 463  * [[Upgrade Firmware>>||anchor="H5.UploadFirmware"]]
464 464  
465 -
466 -
467 -
468 468  = 3. Configure TrackerD via AT command or LoRaWAN downlink =
469 469  
470 470  
... ... @@ -546,7 +546,7 @@
546 546  
547 547  (% style="color:#037691" %)**AT+MTDC=xx. **
548 548  
549 - Example:  AT+MTDC=300000  **~-~->    ** Set Sports Mode Packet Interval to 300 seconds. TrackerD will send every 300 seconds in Sports mode, Default Value: 300000
599 +Example:  AT+MTDC=300000  **~-~->    ** Set Sports Mode Packet Interval to 300 seconds. TrackerD will send every 300 seconds in Sports mode, Default Value: 300000
550 550  
551 551  
552 552  * (% style="color:blue" %)**Downlink Payload (prefix 0x03):**
... ... @@ -562,8 +562,6 @@
562 562  
563 563  * (% style="color:blue" %)**AT Command: No AT Command**
564 564  
565 -
566 -
567 567  * (% style="color:blue" %)**Downlink Payload (prefix 0x02):**
568 568  
569 569  (% style="color:#037691" %)**0x02 01**    (%%) ~/~/  Exit Alarm Mode
... ... @@ -579,7 +579,7 @@
579 579  
580 580  (% style="color:#037691" %)**AT+LON=xx.  (Disable (0), Enable (1), default:1)**
581 581  
582 - Example: AT+LON=0  **~-~-> ** Disable LED for position, downlink and uplink.
630 +Example: AT+LON=0  **~-~-> ** Disable LED for position, downlink and uplink.
583 583  
584 584  
585 585  * (% style="color:blue" %)**Downlink Payload (prefix 0xAE):**
... ... @@ -597,7 +597,7 @@
597 597  
598 598  (% style="color:#037691" %)**AT+INTWK=xx.  (Disable (0), Enable (1), default:0)**
599 599  
600 - Example:  AT+ INTWK =1  **~-~->   ** Enable detect movement.
648 +Example:  AT+ INTWK =1  **~-~->   ** Enable detect movement.
601 601  
602 602  
603 603  * (% style="color:blue" %)**Downlink Payload (prefix 0xAF):**
... ... @@ -609,18 +609,9 @@
609 609  === 3.2.7 Set Positioning Mode ===
610 610  
611 611  
612 -SMOD define the how TrackerD scan and uplink date.
660 +SMOD define the how TrackerD scan and uplink data:
613 613  
614 -GPS室外定位模式：  设备默认模式，设备入网后会发送device当前模式下的信息，随后立即定位发送数据包（默认是3分钟定位，超过将发送无效数据），如果出现意外情况下，快速按键3下，将会发出报警消息（默认每分钟发送一次）。GPS还有一种logdata模式，在断网的情况下将数据存储下来，等到有网的时候，一次将数据以每10秒上报。
615 615  
616 -BLE室内定位模式：  设备入网后会发送device当前模式下的信息，随后立即定位发送数据包（默认是5秒，超过将发送无效数据），如果出现意外情况下，快速按键3下，将会发出报警消息（默认每3分钟发送一次）。
617 -
618 -GPS和BLE混动模式：设备入网后会发送device当前模式下的信息，随后立即判断是否在室内，如果是就进行BLE定位，不是就GPS定位。如果出现意外情况下，快速按键3下，将会发出报警消息（默认每分钟发送一次）。
619 -
620 -运动模式：  设备入网后会发送device当前模式下的信息，随后发送GPS定位数据，设备判断是否在运动，没有运动传感器没有检测到动作，立即进入静止状态（默认20分钟），如果产生运动，将每5分钟发送一次数据，再第五分钟后检测设备有误运动，无将切换到静止状态，有立即发送数据。
621 -
622 -
623 -
624 624  * (% style="color:blue" %)**AT Command:**
625 625  
626 626  (% style="color:#037691" %)**AT+SMOD=xx. **
... ... @@ -735,11 +735,9 @@
735 735  After installation of the driver and plug in TrackerD, user should be able to see com port in PC's device manager.
736 736  
737 737  
738 -(% style="color:blue" %)**Step3：**(%%) Download and Install Flash Tool:
777 +(% style="color:blue" %)**Step3:  **(%%)Download and Install Flash Tool:  [[https:~~/~~/www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools>>url:https://www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools]]
739 739  
740 -[[https:~~/~~/www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools>>url:https://www.espressif.com.cn/en/support/download/other-tools?keys=Flash%2BDownload%2BTools]]
741 741  
742 -
743 743  (% style="color:blue" %)**Step4:** (%%) Run Flash Download Tool and configure chip type to ESP32
744 744  
745 745  
... ... @@ -780,7 +780,7 @@
780 780  === 6.1.1 Set up ARDUINO compile environment ===
781 781  
782 782  
783 -* Download the latest Arduino software (IDE) from the Arduino official website:  [[https:~~/~~/www.arduino.cc/en/Main/Software>>url:https://www.arduino.cc/en/Main/Software]]
820 +* **Download the latest Arduino software (IDE) from the Arduino official website:  [[https:~~/~~/www.arduino.cc/en/Main/Software>>url:https://www.arduino.cc/en/Main/Software]]**
784 784  
785 785  Install IDE on PC, open and click (% style="color:#037691" %)**File ~-~-> Preference**,(%%) add the following URL:  [[https:~~/~~/dl.espressif.com/dl/package_esp32_index.json>>url:https://links.jianshu.com/go?to=https%3A%2F%2Fdl.espressif.com%2Fdl%2Fpackage_esp32_index.json]]
786 786  
... ... @@ -788,13 +788,13 @@
788 788  [[image:1664503635019-941.png]]
789 789  
790 790  
791 -(% style="color:#037691" %)* Go to tools ~-~-> Boards ~-~-> Boards Manager,(%%) find the esp32 information and install it.
828 +* (% style="color:#037691" %)**Go to tools ~-~-> Boards ~-~-> Boards Manager**,(%%) **find the esp32 information and install it.**
792 792  
793 793  [[image:1664503715811-892.png]]
794 794  
795 795  
796 796  
797 -* Download the latest TrackerD from the dragino github: [[https:~~/~~/github.com/dragino/TrackerD>>url:https://github.com/dragino/TrackerD]]
834 +* **Download the latest TrackerD from the dragino github: [[https:~~/~~/github.com/dragino/TrackerD>>url:https://github.com/dragino/TrackerD]]**
798 798  
799 799  Put the Library in the TrackerD directory into the libraries file in the Arduino directory:
800 800  
... ... @@ -806,19 +806,19 @@
806 806  == 6.2 Source Code ==
807 807  
808 808  
809 -* Open the example in the TrackerD file, please select the correct port in the IDE, as shown below:
846 +* (% style="color:blue" %)**Open the example in the TrackerD file, please select the correct port in the IDE, as shown below:**
810 810  
811 811  [[image:1664503794261-827.png]]
812 812  
813 813  
814 814  
815 -* Click to upload
852 +* (% style="color:blue" %)**Click to upload**
816 816  
817 817  [[image:1664503808294-336.png]]
818 818  
819 819  
820 820  
821 -* Check the result, if the upload is successful, as shown below, open the serial port to view the data
858 +* (% style="color:blue" %)**Check the result, if the upload is successful, as shown below, open the serial port to view the data**
822 822  
823 823  [[image:1664503824081-592.png]] [[image:1664503831430-500.png]]
824 824  
... ... @@ -841,8 +841,8 @@
841 841  
842 842  
843 843  
844 -(% border="2" style="background-color:#ffffcc; color:green; width:314px" %)
845 -|(% style="width:118px" %)**Pin**|(% style="width:67px" %)**Color**|(% style="width:123px" %)**USB Pin**
881 +(% border="1.5" cellspacing="3" style="background-color:#ffffcc; color:green; width:314px" %)
882 +|=(% style="width: 118px;" %)**Pin**|=(% style="width: 67px;" %)**Color**|=(% style="width: 123px;" %)**USB Pin**
846 846  |(% style="width:118px" %)A4,B4,A9,B9|(% style="width:67px" %)Red|(% style="width:123px" %)VCC
847 847  |(% style="width:118px" %)A7,B7|(% style="width:67px" %)White|(% style="width:123px" %)D- (N/A)
848 848  |(% style="width:118px" %)A6,B6|(% style="width:67px" %)Green|(% style="width:123px" %)D+(N/A)
... ... @@ -852,6 +852,7 @@
852 852  |(% style="width:118px" %)A8|(% style="width:67px" %)Yellow|(% style="width:123px" %)MTMS/GPIO14
853 853  |(% style="width:118px" %)B8|(% style="width:67px" %)Grey|(% style="width:123px" %)MTDO/GPIO15
854 854  
892 +
855 855  = 8.  Order Info =
856 856  
857 857  
... ... @@ -870,12 +870,12 @@
870 870  = 9.  Packing Info =
871 871  
872 872  
873 -**Package Includes**:
911 +(% style="color:#037691" %)**Package Includes**:
874 874  
875 875  * TrackerD LoRaWAN GPS/BLE Tracker x 1
876 876  * USB recharge & program cable x 1
877 877  
878 -**Dimensions and Weight**:
916 +(% style="color:#037691" %)**Dimensions and Weight**:
879 879  
880 880  * Device Size: 85 x 48 x 15 cm
881 881  * Weight: 50g
... ... @@ -884,7 +884,7 @@
884 884  
885 885  
886 886  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
887 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]]
925 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]].
888 888  
889 889  = 11.  Reference =
890 890  
... ... @@ -892,3 +892,5 @@
892 892  * [[**Firmware in Bin format**>>https://www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0]]
893 893  * **[[Source Code>>https://github.com/dragino/TrackerD]] **
894 894  * [[**Hardware Source**>>https://www.dropbox.com/sh/orwoy6cecb89m4e/AAD37sRuUrvKsHgAJxuVTkB5a?dl=0]]
933 +
934 +
image-20221006181316-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +17.7 KB
Content
image-20221006181357-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +88.0 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0