Skip to Content
Last modified by Bei Jinggeng on 2025/07/23 11:03
From version 188.1
edited by Bei Jinggeng
on 2023/01/06 11:45
Change comment: There is no comment for this version
To version 150.1
edited by Edwin Chen
on 2022/11/24 09:07
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Bei
1 +XWiki.Edwin
Content
... ... @@ -12,7 +12,6 @@
12 12  
13 13  
14 14  
15 -
16 16  = 1.  Introduction =
17 17  
18 18  == 1.1  What is TrackerD ==
... ... @@ -32,9 +32,12 @@
32 32  (((
33 33  The LoRa wireless technology used in TrackerD allows the user to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. It targets professional tracking services.
34 34  )))
34 +)))
35 35  
36 36  (((
37 37  TrackerD is equipped with a (% style="color:blue" %)**1000mAh Li-on rechargeable battery**(%%). Each TrackerD has a worldwide unique OTAA keys to join the LoRaWAN network.
38 +
39 +
38 38  )))
39 39  
40 40  [[image:1664499921684-770.png||_mstalt="298194"]]
... ... @@ -93,7 +93,6 @@
93 93  * LoRa Transmit Mode: 125mA @ 20dBm 44mA @ 14dBm
94 94  * Tracking: max: 38mA
95 95  
96 -
97 97  == 1.3  Features ==
98 98  
99 99  
... ... @@ -112,7 +112,6 @@
112 112  * Tri-color LED, Alarm button
113 113  * Datalog
114 114  
115 -
116 116  == 1.4  Applications ==
117 117  
118 118  
... ... @@ -119,7 +119,6 @@
119 119  * Logistics and Supply Chain Management
120 120  * Human tracking
121 121  
122 -
123 123  = 2.  Use TrackerD =
124 124  
125 125  == 2.1 How it works? ==
... ... @@ -285,7 +285,6 @@
285 285  |=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)5 Bits|(% style="width:60px" %)1 Bit|(% style="width:20px" %)1 Bit|(% style="width:80px" %)1 Bit
286 286  |=(% style="width: 77px;" %)**Value**|(% style="width:70px" %)Reserve|(% style="width:92px" %)[[PNACKMD>>||anchor="H2.4.4A0UplinkFPORT3D42CHistoryGNSSPositioning"]]|(% style="width:48px" %)[[LON>>||anchor="H3.2.5Disable2FEnableLEDflash"]]|(% style="width:126px" %)[[Transport Mode>>||anchor="H2.9TransportMode"]]
287 287  
288 -
289 289  === 2.4.2 Uplink FPORT~=2, Realtime GNSS Positioning + Temperature & Humidity ===
290 290  
291 291  
... ... @@ -423,7 +423,7 @@
423 423  === 2.4.4  Uplink FPORT~=4, History GNSS Positioning ===
424 424  
425 425  
426 -Set [[PNACKMD=1>>||anchor="H3.2.11A0AutoSendNone-ACKmessages"]], and TrackerD will wait for ACK for every uplink, when there is no LoRaWAN network, TrackerD will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
424 +Set [[PNACKMD=1>>||anchor="H3.2.10A0A0AutoSendNone-ACKmessages"]], and TrackerD will wait for ACK for every uplink, when there is no LoRaWAN network, TrackerD will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
427 427  
428 428  
429 429  (% style="color:red" %)**Note for this mode:**
... ... @@ -478,7 +478,6 @@
478 478  * (% style="color:#037691" %)**Measured Power: ** (%%) The Measured Power from the strongest iBeacon.
479 479  * (% style="color:#037691" %)**RSSI:  ** (%%) The RSSI from the strongest iBeacon.
480 480  
481 -
482 482  === 2.4.6  Uplink FPORT~=8, WiFi Positioning with Strongest WiFi SSID（Since firmware 1.4.1） ===
483 483  
484 484  
... ... @@ -501,7 +501,6 @@
501 501  * (% style="color:#037691" %)**SSID:      **(%%)WiFi name.
502 502  * (% style="color:#037691" %)**RSSI:      **(%%)The RSSI from the strongest WiFi.
503 503  
504 -
505 505  === 2.4.7  Add Payload format in TTN V3 ===
506 506  
507 507  
... ... @@ -550,7 +550,7 @@
550 550  
551 551  total 273 entries,by default,
552 552  
553 -User can set [[PNACKMD=1>>||anchor="H3.2.11A0AutoSendNone-ACKmessages"]], to enable Datalog feature.
549 +User can set [[PNACKMD=1>>||anchor="H3.2.10A0A0AutoSendNone-ACKmessages"]], to enable Datalog feature.
554 554  
555 555  Example use case.
556 556  
... ... @@ -590,11 +590,13 @@
590 590  
591 591  In Transport Mode, TrackerD will check if there is motion. If there is no motion, device will send uplinks every 20 minutes. If there is motion, device will send uplink every 5 minutes.
592 592  
593 -* **[[MTDC>>||anchor="H3.2.3SetTransportModePackettransmissioninterval"]]** defines the Uplink Interval during transportation.
594 -* **[[TDC>>||anchor="H3.2.1SetTransmitInterval"]]** defines the uplink interval when TrackerD is stactic.
595 -* **[[PT>>||anchor="H3.2.16GetorSetThresholdformotiondetectFF08Sincefirmware1.4.3FF09"]]** defines the threldhold to detect a motion.
589 +[[MTDC>>||anchor="H3.2.3SetTransportModePackettransmissioninterval"]] defines the Uplink Interval during transportation.
596 596  
591 +[[TDC>>||anchor="H3.2.1SetTransmitInterval"]] defines the uplink interval when TrackerD is stactic.
597 597  
593 +[[PT>>||anchor="H3.2.1SetTransmitInterval"]] defines the threldhold to detect a motion.
594 +
595 +
598 598  == 2.10 LED Status ==
599 599  
600 600  
... ... @@ -612,7 +612,6 @@
612 612  |(% style="width:157px" %)**Get Downlink**|(% style="width:271px" %)(% style="color:green" %)**GREEN**(%%) led on 1 second|(% style="width:202px" %)Yes
613 613  |(% style="width:157px" %)**Movement Detect**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)led on 500ms|(% style="width:202px" %)N/A
614 614  
615 -
616 616  == 2.11 Button Function ==
617 617  
618 618  
... ... @@ -634,7 +634,6 @@
634 634  |(% style="width:135px" %)Exit Alarm Mode|(% style="width:220px" %)Fast press the (% style="color:red" %)**RED** (%%)button 10 times|(% style="width:265px" %)Exit Alarm Mode
635 635  |(% style="width:135px" %)Enter Deep Sleep Mode|(% style="width:220px" %)Press and hold the button for 10 seconds, then quickly press the device 3 times to enter deep sleep|(% style="width:265px" %)This is the mode ship out from factory. CPU will be complete in sleep mode and no LoRa activity, only use before deploy.
636 636  
637 -
638 638  == 2.12 USB Port Function ==
639 639  
640 640  
... ... @@ -645,7 +645,6 @@
645 645  * [[Configure Device>>||anchor="H3.ConfigureTrackerDviaATcommandorLoRaWANdownlink"]]
646 646  * [[Upgrade Firmware>>||anchor="H5.UploadFirmware"]]
647 647  
648 -
649 649  = 3. Configure TrackerD via AT command or LoRaWAN downlink =
650 650  
651 651  
... ... @@ -675,6 +675,7 @@
675 675  [[image:1664503047675-651.png||_mstalt="295386"]]
676 676  
677 677  
673 +
678 678  == 3.2 Command Set ==
679 679  
680 680  === 3.2.1 Set Transmit Interval ===
... ... @@ -740,7 +740,7 @@
740 740  (% style="color:#037691" %)**0x02 01**    (%%) ~/~/  Exit Alarm Mode
741 741  
742 742  
743 -=== 3.2.5 Disable/Enable LED flash and buzzer ===
739 +=== 3.2.5 Disable/Enable LED flash ===
744 744  
745 745  
746 746  Disable/Enable LED for position, downlink and uplink
... ... @@ -864,8 +864,8 @@
864 864  (% style="color:#037691" %)**0xAD 00 46**    (%%) ~/~/  Set AT+PDOP=7  (0x46 / 10 =7)
865 865  
866 866  
867 -=== 3.2.10 Disable/Enable the confirmation mode ===
868 868  
864 +=== 3.2.10 Disable/Enable the confirmation mode ===
869 869  
870 870  * (% style="color:blue" %)**AT Command:**
871 871  
... ... @@ -948,11 +948,11 @@
948 948  
949 949  (% style="color:blue" %)**AT Command:**
950 950  
951 -(% style="color:#037691" %)**AT+SHOWID=XX         **(%%) ~/~/  (Disable (0), Enable (1), default:0)
947 +(% style="color:#037691" %)**AT+SHOWID=XX         **(%%) ~/~/(Disable (0), Enable (1), default:0)
952 952  \\Example: AT+SHOWID=1 ~-~-> Enable Information printing.
953 953  
954 954  
955 -=== 3.2.15  Get or Set Eight Channels Mode, only for us915, AU915（Since firmware 1.4.1） ===
951 +=== 3.2.15 Get or Set Eight Channels Mode, only for us915, AU915（Since firmware 1.4.1） ===
956 956  
957 957  
958 958  The Channels Mode in the LORAWAN LMIC library is from 0 ~~ 7. When CHE = 8, 72 channels will be accessible to the network.
... ... @@ -959,34 +959,14 @@
959 959  
960 960  (% style="color:blue" %)**AT Command:**
961 961  
962 -(% style="color:#037691" %)**AT+CHE=1      **(%%) ~/~/ set one channels mode
958 +(% style="color:#037691" %)**AT+CHE=1**(%%) ~/~/ set one channels mode
963 963  
964 964  
965 965  (% style="color:blue" %)**Downlink Payload:0X24**
966 966  
967 -Example: 0x24 01  ~/~/ Same as AT+CHE=1
963 +Example: 0x24 01 ~/~/ Same as AT+CHE=1
968 968  
969 969  
970 -=== 3.2.16  Get or Set Threshold for motion detect（Since firmware 1.4.3） ===
971 -
972 -
973 -User can set the motion detect thredhold for transportation mode. The smaller the value, the more sensitivity to trigger a motion event.
974 -
975 -(% style="color:blue" %)**AT Command:**
976 -
977 -(% style="color:#037691" %)**AT+PT=xx**
978 -
979 - Example:
980 -
981 - AT+PT=14    ~-~->    Set to detect car motion.
982 -
983 - AT+PT=41  ~-~->    set to detect walk motion.
984 -
985 -
986 -(% style="color:blue" %)**Downlink Payload:0xB4**(%%)
987 -0xB4 14          ~/~/  Same as AT+PT=14
988 -
989 -
990 990  = 4. Setting for Different Scenarios =
991 991  
992 992  
... ... @@ -1038,15 +1038,16 @@
1038 1038  US915.bin @ 0x10000(Select the bin file of the frequency band you need)
1039 1039  
1040 1040  
1041 -[[image:image-20221207120501-1.png]]
1017 +[[image:image-20221118105220-2.png||_mstalt="426608"]]
1042 1042  
1043 1043  
1044 1044  
1045 1045  After upgrade finish, it will show finish as below:
1046 1046  
1047 -[[image:image-20221207133911-7.png]]
1023 +[[image:image-20221118105402-4.png||_mstalt="427986"]]
1048 1048  
1049 1049  
1026 +
1050 1050  = 6. Developer Guide =
1051 1051  
1052 1052  == 6.1 Compile Source Code ==
... ... @@ -1068,69 +1068,13 @@
1068 1068  [[image:1664503715811-892.png||_mstalt="295698"]]
1069 1069  
1070 1070  
1071 -=== 6.1.2  Build the development environment ===
1072 -
1073 -
1074 -**~1. Download and install arduino IDE**
1075 -
1076 -[[https:~~/~~/www.arduino.cn/thread-5838-1-1.html>>url:https://links.jianshu.com/go?to=https%3A%2F%2Fwww.arduino.cn%2Fthread-5838-1-1.html]]
1077 -
1078 -
1079 -**2. Download the ESP32 development package in the arduino IDE**
1080 -
1081 -[[image:image-20221213100007-1.png]]
1082 -
1083 -
1084 -Input: [[https:~~/~~/dl.espressif.com/dl/package_esp32_index.json>>https://dl.espressif.com/dl/package_esp32_index.json]]
1085 -
1086 -[[image:image-20221213100626-2.png]]
1087 -
1088 -
1089 -Restart the IDE after the addition is complete, then:
1090 -
1091 -[[image:image-20221213100808-3.png||height="679" width="649"]]
1092 -
1093 -
1094 -[[image:image-20221213101040-4.png]]
1095 -
1096 -
1097 -(% style="color:red" %)**Note: Currently version 1.04 is almost impossible to download, you can choose version 1.03.
1098 -Don't quit halfway.~~! If you quit halfway, there is a high probability that it will freeze, and you will need to download again next time. (If you click to continue downloading, an error will be reported after completion)**
1099 -
1100 -Then enter a long waiting process. If you don't want to wait, you can go to the Internet to download directly, and then import:
1101 -
1102 -(% style="color:blue" %)**Methods as below:**
1103 -
1104 -~1. Download: [[https:~~/~~/github.com/dragino/TrackerD/releases/tag/v1.4.4>>https://github.com/dragino/TrackerD/releases/tag/v1.4.4]]
1105 -
1106 -2. Find the arduino installation path, hardware → create a new espressif folder → create a new esp32 folder, unzip the compressed package here.
1107 -
1108 1108  (% id="cke_bm_4554S" style="display:none" %) (%%)Find the path of SP32 installation, find the file as shown in Figure 1, and change the SPI pin to the shown in Figure 2.
1109 1109  
1110 -[[image:image-20221213102311-5.png||height="582" width="711"]]
1111 -
1112 -
1113 -**3. Find tools→get.exe in the decompressed file and run it (it will close automatically after completion)**
1114 -
1115 -[[image:image-20221213102334-6.png]]
1116 -
1117 -(% style="color:red" %)**Note: This step requires a python environment**
1118 -
1119 -
1120 -Either way, in the end:
1121 -
1122 -The final effect is to open the arduino and you can see the esp32
1123 -
1124 -[[image:image-20221213110952-8.png||height="866" width="711"]]
1125 -
1126 -
1127 -
1128 1128  [[image:image-20221024105643-1.png||_mstalt="428129"]]
1129 1129  
1130 1130  **~ Figure1**
1131 1131  
1132 1132  
1133 -
1134 1134  [[image:image-20221024105643-2.png||_mstalt="428493"]]
1135 1135  
1136 1136   **Figure2**
... ... @@ -1190,7 +1190,6 @@
1190 1190  |(% style="width:118px" %)A8|(% style="width:67px" %)Yellow|(% style="width:123px" %)MTMS/GPIO14
1191 1191  |(% style="width:118px" %)B8|(% style="width:67px" %)Grey|(% style="width:123px" %)MTDO/GPIO15
1192 1192  
1193 -
1194 1194  == 7.3 Notes on using different serial port tools for TrackerD ==
1195 1195  
1196 1196  === 7.3.1  Serial port utility ===
... ... @@ -1273,12 +1273,6 @@
1273 1273  [[image:image-20221116111844-5.png||_mstalt="430144" height="551" width="708"]]
1274 1274  
1275 1275  
1276 -== 7.5 Are there example python example for BLE Indoor Positioning? ==
1277 -
1278 -
1279 -[[Operating instructions for BLE indoor positioning>>doc:.Example of BLE indoor positioning python.WebHome]]
1280 -
1281 -
1282 1282  = 8  Trouble Shooting =
1283 1283  
1284 1284  == 8.1  TDC is changed to 4294947296 and cause no uplink. ==
... ... @@ -1285,7 +1285,7 @@
1285 1285  
1286 1286  
1287 1287  (((
1288 -Before firmware v1.4.0: When the Transport Mode is enabled ((% style="color:blue" %)**AT+INTWK=1**(%%)), the **TDC** needs to be greater than **MTDC**, otherwise, TDC setting will because 4294947296 after wakre up from motion. This bug is fixed in firmware v1.4.1
1202 +Before firmware v1.4.0: When the Transport Mode is enabled (**AT+INTWK=1**), the **TDC** needs to be greater than **MTDC**, otherwise, TDC setting will because 4294947296 after wakre up from motion. This bug is fixed in firmware v1.4.1
1289 1289  )))
1290 1290  
1291 1291  
... ... @@ -1299,65 +1299,54 @@
1299 1299  
1300 1300  == 8.3  Problem after Upgrading Firmware ==
1301 1301  
1302 -=== 8.3.1 "rst: (0x3 SW_RESET)" and Continue Restart after upgrading ===
1216 +=== 8.3.1 Continue Restart after upgrading ===
1303 1303  
1304 1304  
1305 -**Error Output**
1306 -
1307 -
1308 -[[image:image-20221122100004-4.png||_mstalt="424606"]]
1309 -
1310 -
1311 1311  (((
1312 -Some partition is missed during upgrade, please upgrade below four files as example:
1313 -
1314 -[[image:image-20221207120524-2.png]]
1220 +If it is V1.4.0 and the previous version, new partitions need to be loaded when upgrading. The new version of the software is stored in the partition package. The upgrade method is shown in the figure
1315 1315  )))
1316 1316  
1317 1317  
1318 -=== 8.3.2 TrackerD's led light is always GREEN on after upgrading ===
1224 +[[image:image-20221118105249-3.png||_mstalt="430664"]]
1319 1319  
1320 1320  
1321 -It is because the partitions are different when upgrading versions above 1.4.1, and a new partition file needs to be added. Please refer to the operation steps in chapter 8.3.1
1227 +=== 8.3.2 TrackerD's led light is always GREEN on after upgrading ===
1322 1322  
1323 1323  
1324 -=== 8.3.3 "flash read err" after upgrade firmware ===
1230 +It is because the partitions are different when upgrading versions above 1.4.1, and a new partition file needs to be added. Please refer to the operation steps in chapter 8.3.1
1325 1325  
1326 1326  
1233 +=== 8.3.3 "flash read err" after upgrade firmware ===
1234 +
1327 1327  Error shows below, user might erase the entire flash include u-boot partition which cause this issue.
1328 1328  
1329 -
1330 1330  [[image:image-20221122100004-1.png||_mstalt="423514" height="497" width="534"]]
1331 1331  
1332 1332  
1333 1333  User need to upgrade again with below four files to solve this issue.
1334 1334  
1335 - [[image:image-20221207120530-3.png]]
1242 + [[image:image-20221122100004-2.png||_mstalt="423878" height="619" width="389"]]
1336 1336  
1337 1337   **Figure 2**
1338 1338  
1339 1339  
1340 -=== 8.3.4  "Device Key become ff ff ff ff ff ff ff ff " after upgrade firmware ===
1247 +=== 8.3.3 "Device Key become ff ff ff ff ff ff ff ff " after upgrade firmware ===
1341 1341  
1342 -
1343 1343  User might erase the entire flash include keys and default settings which cause this issue.
1344 1344  
1345 -After the upgrade is completed, enter **AT+CFG** as shown in the figure below.
1251 +After the upgrade is completed, enter AT+CFG as shown in the figure below.
1346 1346  
1347 -
1348 1348  [[image:image-20221122100004-3.png||_mstalt="424242"]]
1349 1349  
1255 +Please **AT+FDR** which will reset all settings to factory settings. , and then input the following keys by the information on the label.
1350 1350  
1351 -Please (% style="color:blue" %)**AT+FDR**(%%) which will reset all settings to factory settings. , and then input the following keys by the information on the label.
1352 -
1353 1353  After AT+FDR. please set
1354 1354  
1355 -* (% _mstmutation="1" style="color:blue" %)**AT+PDOP=7**
1259 +* AT+PDOP=7
1260 +* AT+FTIME=180000
1356 1356  
1357 -* (% _mstmutation="1" style="color:blue" %)**AT+FTIME=180000**
1262 +Example:
1358 1358  
1359 -**Example:**
1360 -
1361 1361  AT+PDOP=7.00
1362 1362  
1363 1363  AT+FTIME=180
... ... @@ -1375,6 +1375,13 @@
1375 1375  AT+APPSKEY=dacce2299ecd97a73ee3f80b5a46a559   ( no need for OTAA)
1376 1376  
1377 1377  
1281 +
1282 +=== 8.3.4  If there is a situation in Figure 1, and a new partition file needs to be added. Please refer to the operation steps in chapter 8.3.1 ===
1283 +
1284 +
1285 +[[image:image-20221122100004-4.png||_mstalt="424606"]]
1286 +
1287 +
1378 1378  == 8.4  When positioning, it will restart or the PDOP setting is unsuccessful ==
1379 1379  
1380 1380  
... ... @@ -1397,52 +1397,6 @@
1397 1397  Please refer to this [[link>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/TrackerD/#H3.2.9SetPDOPvalueforGPSfixaccuracy]] on how to set up PDOP
1398 1398  
1399 1399  
1400 -== 8.6  When upgrading the firmware, the data is not completely erased, and the information does not return to normal after multiple resets ==
1401 -
1402 -
1403 -When upgrading, use the erase button to upgrade
1404 -
1405 -[[image:image-20221207120536-4.png]]
1406 -
1407 -
1408 -The parameters are displayed abnormally and cannot be fixed using AT+FDR
1409 -
1410 -[[image:image-20221128103040-2.png||height="431" width="525"]]
1411 -
1412 -
1413 -Please upgrade these four files,link（The boot_app0 file is in the version folder you need)
1414 -
1415 -[[image:image-20221207134028-8.png]]
1416 -
1417 -
1418 -Reboot information after upgrade
1419 -
1420 -[[image:image-20221128111443-4.png||height="432" width="546"]]
1421 -
1422 -
1423 -Use AT+FDR command to reset and then use AT+CFG to check whether the configuration is back to normal
1424 -
1425 -[[image:image-20221128111850-5.png]]
1426 -
1427 -
1428 -After the parameters return to normal, upgrade to the version you need again
1429 -
1430 -[[image:image-20221207120601-5.png]]
1431 -
1432 -
1433 -At this point, the parameters return to normal after running AT+FDR again
1434 -
1435 -[[image:image-20221128112035-7.png]]
1436 -
1437 -
1438 -== 8.7  If you encounter the following problems, please upgrade to the latest version ==
1439 -
1440 -
1441 -~1. Press and hold the red button (more than 5 seconds), and the device and server do not respond.
1442 -
1443 -2. Send some commands through the serial port to prompt an error (Example：AT+SMOD=1,0,1)
1444 -
1445 -
1446 1446  = 9.  Order Info =
1447 1447  
1448 1448  
... ... @@ -1464,7 +1464,6 @@
1464 1464  
1465 1465  * (% style="color:red" %)**US915**(%%): Default frequency band US915
1466 1466  
1467 -
1468 1468  = 10.  Packing Info =
1469 1469  
1470 1470  
... ... @@ -1480,7 +1480,6 @@
1480 1480  
1481 1481  * Weight: 50g
1482 1482  
1483 -
1484 1484  = 11. Support =
1485 1485  
1486 1486  
... ... @@ -1488,7 +1488,6 @@
1488 1488  
1489 1489  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]].
1490 1490  
1491 -
1492 1492  = 12.  Reference =
1493 1493  
1494 1494  
... ... @@ -1497,4 +1497,3 @@
1497 1497  * **[[Source Code>>https://github.com/dragino/TrackerD]] **
1498 1498  
1499 1499  * [[**Hardware Source**>>https://www.dropbox.com/sh/orwoy6cecb89m4e/AAD37sRuUrvKsHgAJxuVTkB5a?dl=0]]
1500 -)))
image-20221128102938-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -41.3 KB
Content
image-20221128103040-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -19.2 KB
Content
image-20221128110503-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20221128111443-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -15.6 KB
Content
image-20221128111850-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -14.5 KB
Content
image-20221128111951-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -45.4 KB
Content
image-20221128112035-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -14.7 KB
Content
image-20221207120501-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -44.5 KB
Content
image-20221207120524-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -44.5 KB
Content
image-20221207120530-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -44.5 KB
Content
image-20221207120536-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -44.5 KB
Content
image-20221207120601-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -44.5 KB
Content
image-20221207133836-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -52.1 KB
Content
image-20221207133911-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -46.3 KB
Content
image-20221207134028-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -49.3 KB
Content
image-20221213100007-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -32.7 KB
Content
image-20221213100626-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -35.7 KB
Content
image-20221213100808-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -91.3 KB
Content
image-20221213101040-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -26.3 KB
Content
image-20221213102311-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -49.7 KB
Content
image-20221213102334-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -52.5 KB
Content
image-20221213102718-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -116.5 KB
Content
image-20221213110952-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -152.8 KB
Content