Skip to Content
Last modified by Xiaoling on 2025/04/27 16:48
From version 144.1
edited by Edwin Chen
on 2022/11/22 12:21
Change comment: There is no comment for this version
To version 113.2
edited by Xiaoling
on 2022/11/09 15:43
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Xiaoling
Content
... ... @@ -14,6 +14,7 @@
14 14  
15 15  = 1.  Introduction =
16 16  
17 +
17 17  == 1.1  What is TrackerD ==
18 18  
19 19  
... ... @@ -45,6 +45,7 @@
45 45  (% style="color:red" %)**Note: LoRaWAN server can be a general LoRaWAN server other than TTN.**
46 46  
47 47  
49 +
48 48  == 1.2 Specifications ==
49 49  
50 50  
... ... @@ -96,6 +96,7 @@
96 96  * Tracking: max: 38mA
97 97  
98 98  
101 +
99 99  == 1.3  Features ==
100 100  
101 101  
... ... @@ -115,6 +115,7 @@
115 115  * Datalog
116 116  
117 117  
121 +
118 118  == 1.4  Applications ==
119 119  
120 120  
... ... @@ -122,8 +122,10 @@
122 122  * Human tracking
123 123  
124 124  
129 +
125 125  = 2.  Use TrackerD =
126 126  
132 +
127 127  == 2.1 How it works? ==
128 128  
129 129  
... ... @@ -130,6 +130,7 @@
130 130  TrackerD is configured as LoRaWAN OTAA Class A GPS tracker by default. It has OTAA keys to join LoRaWAN network. To connect a LoRaWAN network, user need to input the OTAA keys in the LoRaWAN IoT server and push reset button of TrackerD (next to USB port). TrackerD will wake up and auto join the network via OTAA.
131 131  
132 132  
139 +
133 133  == 2.2 Quick guide to connect to LoRaWAN server ==
134 134  
135 135  
... ... @@ -171,20 +171,18 @@
171 171  **__Add APP KEY and DEV EUI:__**
172 172  
173 173  
174 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS02%20-%20LoRaWAN%20Door%20Sensor%20User%20Manual/WebHome/1654671889112-678.png?rev=1.1||alt="1654671889112-678.png"]]
181 +[[image:1664501784668-703.png]]
175 175  
176 176  
177 177  
178 -(% style="color:blue" %)**Step 2**:(%%) Push this button will activate this device.
179 179  
180 -(% id="cke_bm_7709S" style="display:none" %) [[image:1664502835802-546.png]]
186 +(% style="color:blue" %)**Step 2**:(%%) Power on TrackerD by using the on board switch.
181 181  
182 -[[image:1664502835802-546.png]]
183 183  
184 -
185 185  (% style="color:blue" %)**Step 3:**(%%) TrackerD will auto join to the LoRaWAN network. After join success, TrackerD will start to upload message to IoT server.
186 186  
187 187  
192 +
188 188  == 2.3  Positioning Mode(SMOD) ==
189 189  
190 190  
... ... @@ -197,8 +197,10 @@
197 197  Users can switch modes by [[changing SMOD>>||anchor="H3.2.7SetPositioningMode"]].
198 198  
199 199  
205 +
200 200  == 2.4  Uplink Payload ==
201 201  
208 +
202 202  === 2.4.1 Uplink FPORT~=5, Device Status ===
203 203  
204 204  
... ... @@ -288,6 +288,7 @@
288 288  |=(% style="width: 77px;" %)**Value**|(% style="width:70px" %)Reserve|(% style="width:92px" %)[[PNACKMD>>||anchor="H2.4.4A0UplinkFPORT3D42CHistoryGNSSPositioning"]]|(% style="width:48px" %)[[LON>>||anchor="H3.2.5Disable2FEnableLEDflash"]]|(% style="width:126px" %)[[Transport Mode>>||anchor="H2.9TransportMode"]]
289 289  
290 290  
298 +
291 291  === 2.4.2 Uplink FPORT~=2, Realtime GNSS Positioning + Temperature & Humidity ===
292 292  
293 293  
... ... @@ -316,6 +316,7 @@
316 316  |=(% style="width: 72px;" %)**Value**|(% style="width:67px" %)reserve|(% style="width:118px" %)Alarm Indicate|(% style="width:63px" %)[[BAT>>||anchor="HBAT:"]] 
317 317  
318 318  
327 +
319 319  ==== (% style="color:blue" %)**FLAG:**(%%) ====
320 320  
321 321  (% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:120px" %)
... ... @@ -366,6 +366,7 @@
366 366  * < 3.39v:  0~~20%
367 367  
368 368  
378 +
369 369  ==== (% style="color:blue" %)**MOD:**(%%) ====
370 370  
371 371  **Example: ** (0x60>>6) & 0x3f =1
... ... @@ -406,6 +406,7 @@
406 406  011A =if (0x011A & 0x8000 = 1 ):  value =( 0x011A - 0x10000)/10(dec) ⇒ -//28.2 degree//
407 407  
408 408  
419 +
409 409  === 2.4.3  Uplink FPORT~=3, Realtime GNSS Positioning (Default Mode) ===
410 410  
411 411  
... ... @@ -424,6 +424,7 @@
424 424  [[image:1665301687277-443.png]]
425 425  
426 426  
438 +
427 427  === 2.4.4  Uplink FPORT~=4, History GNSS Positioning ===
428 428  
429 429  
... ... @@ -447,6 +447,7 @@
447 447  [[image:image-20221009160309-2.png]]
448 448  
449 449  
462 +
450 450  === 2.4.5  Uplink FPORT~=6, BLE Positioning with Strongest iBeacon ===
451 451  
452 452  
... ... @@ -478,11 +478,12 @@
478 478  * (% style="color:#037691" %)**MODE:   **(%%)Define the payload format.
479 479  * (% style="color:#037691" %)**UUID:     **(%%)The uuid from the strongest iBeacon.
480 480  * (% style="color:#037691" %)**MAJOR:** (%%) The MAJOR from the strongest iBeacon.
481 -* (% style="color:#037691" %)**MINOR:**  (%%)The MINOR from the strongest iBeacon.
494 +* (% style="color:#037691" %)**MINOR:**  (%%)The MAJOR from the strongest iBeacon.
482 482  * (% style="color:#037691" %)**Measured Power: ** (%%) The Measured Power from the strongest iBeacon.
483 483  * (% style="color:#037691" %)**RSSI:  ** (%%) The RSSI from the strongest iBeacon.
484 484  
485 485  
499 +
486 486  === 2.4.6  Uplink FPORT~=8, WiFi Positioning with Strongest WiFi SSID（Since firmware 1.4.1） ===
487 487  
488 488  
... ... @@ -506,6 +506,7 @@
506 506  * (% style="color:#037691" %)**RSSI:      **(%%)The RSSI from the strongest WiFi.
507 507  
508 508  
523 +
509 509  === 2.4.7  Add Payload format in TTN V3 ===
510 510  
511 511  
... ... @@ -517,7 +517,6 @@
517 517  [[image:1664502649601-895.png]]
518 518  
519 519  
520 -
521 521  Add the decoder from this link: 
522 522  
523 523  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/TrackerD>>https://github.com/dragino/dragino-end-node-decoder/tree/main/TrackerD]]
... ... @@ -527,6 +527,7 @@
527 527  [[image:1664502676891-606.png]]
528 528  
529 529  
544 +
530 530  == 2.5 Integrate with Datacake ==
531 531  
532 532  
... ... @@ -534,10 +534,10 @@
534 534  
535 535  Instruction is here:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20Data%20Cake/#H7.Example~~-~~-AddTrackerDGPSTrackingInDataCake>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20Data%20Cake/#H7.Example--AddTrackerDGPSTrackingInDataCake]]
536 536  
537 -
538 538  [[image:1664502695771-538.png]]
539 539  
540 540  
555 +
541 541  == 2.6 Integrate with Tago ==
542 542  
543 543  
... ... @@ -546,9 +546,11 @@
546 546  Instruction is here: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Tago.IO/#H3.A0Example-CreateTrackerD2FLGT92positioningwidget>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Tago.IO/#H3.A0Example-CreateTrackerD2FLGT92positioningwidget]]
547 547  
548 548  
564 +
549 549  [[image:1664502715371-321.png]]
550 550  
551 551  
568 +
552 552  == 2.7  Datalog Feature ==
553 553  
554 554  
... ... @@ -564,6 +564,7 @@
564 564  [[image:image-20221009234629-1.png||height="390" width="577"]]
565 565  
566 566  
584 +
567 567  == 2.8 Alarm Mode ==
568 568  
569 569  
... ... @@ -578,7 +578,7 @@
578 578  
579 579  
580 580  (((
581 -**Two ways to exit alarm mode:**
599 +Two ways to exit alarm mode:
582 582  )))
583 583  
584 584  * Server sends a downlink command to exit.
... ... @@ -589,6 +589,7 @@
589 589  )))
590 590  
591 591  
610 +
592 592  == 2.9 Transport Mode ==
593 593  
594 594  
... ... @@ -595,16 +595,17 @@
595 595  In Transport Mode, TrackerD will check if there is motion. If there is no motion, device will send uplinks every 20 minutes. If there is motion, device will send uplink every 5 minutes.
596 596  
597 597  
617 +
598 598  == 2.10 LED Status ==
599 599  
600 600  
601 -(% border="1.5" style="background-color:#ffffcc; width:500px" %)
621 +(% border="1.5" style="background-color:#ffffcc; color:green; width:500px" %)
602 602  |=(% style="width: 150px;" %)**Event**|=(% style="width: 200px;" %)**Action**|=(% style="width: 150px;" %)**AT+LON to control on/off**
603 603  |(% style="width:157px" %)**Power On**|(% style="width:271px" %)(% style="color:blue" %)**BLUE, **(% style="color:red" %)**RED , **(% style="color:green" %)**Green** flash once|(% style="width:202px" %)N/A
604 604  |(% style="width:157px" %)**Join request**|(% style="width:271px" %)(% style="color:green" %)**Green** (%%)led fast blink once (200ms)|(% style="width:202px" %)Yes
605 605  |(% style="width:157px" %)**Join Success**|(% style="width:271px" %)(% style="color:green" %)**Green**(%%) led on 5 second|(% style="width:202px" %)N/A
606 606  |(% style="width:157px" %)**Fixing Location**|(% style="width:271px" %)(% style="color:blue" %)**BLUE **(%%)blinks 200ms per second|(% style="width:202px" %)Yes
607 -|(% style="width:157px" %)**Fixed and uplink**|(% style="width:271px" %)(% style="color:green" %)**GREEN **(%%)blinks twice (200ms per blink)|(% style="width:202px" %)Yes
627 +|(% style="width:157px" %)**Fixed and uplink**|(% style="width:271px" %)(% style="color:green" %)**GREEN ***(%%)***blinks twice (200ms per blink)**|(% style="width:202px" %)Yes
608 608  |(% style="width:157px" %)**Fail Fix and uplink**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)blinks twice (200ms per blink)|(% style="width:202px" %)Yes
609 609  |(% style="width:157px" %)**Enter Alarm mode**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)on for 3 seconds|(% style="width:202px" %)Yes
610 610  |(% style="width:157px" %)**Uplink under Alarm**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)on for 1 second|(% style="width:202px" %)Yes
... ... @@ -613,6 +613,7 @@
613 613  |(% style="width:157px" %)**Movement Detect**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)led on 500ms|(% style="width:202px" %)N/A
614 614  
615 615  
636 +
616 616  == 2.11 Button Function ==
617 617  
618 618  
... ... @@ -628,13 +628,14 @@
628 628  [[image:1664502854406-763.png]]
629 629  
630 630  
631 -(% border="1" style="background-color:#ffffcc; width:510px" %)
652 +(% border="1" style="background-color:#ffffcc; color:green; width:510px" %)
632 632  |=(% style="width: 100px;" %)**Function**|=(% style="width: 205px;" %)**Action**|=(% style="width: 205px;" %)**Description**
633 -|(% style="width:135px" %)Send Alarm|(% style="width:220px" %)Keep Pressing (% style="color:red" %)**RED**(%%) button for more than 5 seconds|(% style="width:265px" %)Enter Alarm Mode.  See [[Alarm Mode>>||anchor="H2.8AlarmMode"]]
654 +|(% style="width:135px" %)Send Alarm|(% style="width:220px" %)Keep Pressing (% style="color:red" %)**RED**(%%) button for more than 5 seconds|(% style="width:265px" %)Enter Alarm Mode.  See [[Alarm Mode>>||anchor="H2.6AlarmMode"]]
634 634  |(% style="width:135px" %)Exit Alarm Mode|(% style="width:220px" %)Fast press the (% style="color:red" %)**RED** (%%)button 10 times|(% style="width:265px" %)Exit Alarm Mode
635 635  |(% style="width:135px" %)Enter Deep Sleep Mode|(% style="width:220px" %)Press and hold the button for 10 seconds, then quickly press the device 3 times to enter deep sleep|(% style="width:265px" %)This is the mode ship out from factory. CPU will be complete in sleep mode and no LoRa activity, only use before deploy.
636 636  
637 637  
659 +
638 638  == 2.12 USB Port Function ==
639 639  
640 640  
... ... @@ -646,6 +646,7 @@
646 646  * [[Upgrade Firmware>>||anchor="H5.UploadFirmware"]]
647 647  
648 648  
671 +
649 649  = 3. Configure TrackerD via AT command or LoRaWAN downlink =
650 650  
651 651  
... ... @@ -654,6 +654,7 @@
654 654  LoRaWAN Downlink instruction for different platforms:  [[IoT LoRaWAN Server>>doc:Main.WebHome]]
655 655  
656 656  
680 +
657 657  == 3.1 Access AT Command ==
658 658  
659 659  
... ... @@ -678,6 +678,7 @@
678 678  
679 679  == 3.2 Command Set ==
680 680  
705 +
681 681  === 3.2.1 Set Transmit Interval ===
682 682  
683 683  
... ... @@ -695,6 +695,7 @@
695 695  (% style="color:#037691" %)**0x01 00 01 2C**  (%%) ~/~/  Same as AT+TDC=300000
696 696  
697 697  
723 +
698 698  === 3.2.2 Set Alarm Packet transmission interval ===
699 699  
700 700  
... ... @@ -712,6 +712,7 @@
712 712  (% style="color:#037691" %)**0xB1 00 00 3C ** (%%) ~/~/  Same as AT+ATDC=60000
713 713  
714 714  
741 +
715 715  === 3.2.3 Set Transport Mode Packet transmission interval ===
716 716  
717 717  
... ... @@ -729,6 +729,7 @@
729 729  (% style="color:#037691" %)**0x03 00 01 2C**  (%%) ~/~/  Same as AT+MTDC=3000000
730 730  
731 731  
759 +
732 732  === 3.2.4 Exit Alarm ===
733 733  
734 734  
... ... @@ -741,6 +741,7 @@
741 741  (% style="color:#037691" %)**0x02 01**    (%%) ~/~/  Exit Alarm Mode
742 742  
743 743  
772 +
744 744  === 3.2.5 Disable/Enable LED flash ===
745 745  
746 746  
... ... @@ -758,6 +758,7 @@
758 758  (% style="color:#037691" %)**0xAE 00 ** (%%) ~/~/  Same as AT+LON=0
759 759  
760 760  
790 +
761 761  === 3.2.6 Disable/Enable Transport Mode ===
762 762  
763 763  
... ... @@ -775,6 +775,7 @@
775 775  (% style="color:#037691" %)**0xAF 01 ** (%%) ~/~/  Same as AT+INTWK=1
776 776  
777 777  
808 +
778 778  === 3.2.7 Set Positioning Mode ===
779 779  
780 780  
... ... @@ -788,11 +788,9 @@
788 788  (% style="color:#037691" %)** aa:**
789 789  
790 790  * (% style="color:red" %)**1: GPS ONLY(Factory Settings):    **(%%)Only get and uplink GPS location info.
791 -
792 792  * (% style="color:red" %)**2: BLE or WiFi ONLY:                     **(%%)Only obtain iBeacon info via BLE and uplink  or obtain WiFi ssid info via WiFi and uplink. Design for Indoor tracking.
823 +* (% style="color:red" %)**3: GPS/BLE Hybrid:                        **(%%)Combination for Indoor and Outdoor tracking.Devices will try to search BLE iBeacon first. If device can't find the iBeacon, it will use GPS for positioning.
793 793  
794 -* (% style="color:red" %)**3: GPS/BLE Hybrid:                       **(%%)Combination for Indoor and Outdoor tracking.Devices will try to search BLE iBeacon first. If device can't find the iBeacon, it will use GPS for positioning.
795 -
796 796  (% style="color:#037691" %)**bb:**
797 797  
798 798  * (% style="color:red" %)**0 :  **(%%)GPS+ BAT+ State+Tem&Hum
... ... @@ -821,6 +821,7 @@
821 821  (% style="color:#037691" %)**0xA5 01 00 00**    (%%) ~/~/  Same as AT+SMOD=1,0,0
822 822  
823 823  
853 +
824 824  === 3.2.8 Set MAX GPS position time ===
825 825  
826 826  
... ... @@ -827,7 +827,7 @@
827 827  Set max positioning time, default is 150 seconds. TrackerD will try to get location info within this period. If fail to get position data within this time, TrackerD will use 000000 for latitude and longitude.
828 828  
829 829  
830 -If **AT+FTIME=0**. The GPS module will be always powered and positioning. This will highly increase the power consumption (up to 50mA). When AT+FTIME=0, it will improve fix accuracy and shorten the acquire time for next uplink.
860 +If AT+FTIME=0. The GPS module will be always powered and positioning. This will highly increase the power consumption (up to 50mA). When AT+FTIME=0, it will improve fix accuracy and shorten the acquire time for next uplink.
831 831  
832 832  
833 833  * (% style="color:blue" %)**AT Command:**
... ... @@ -842,6 +842,7 @@
842 842  (% style="color:#037691" %)**0xAA 00 96 ** (%%) ~/~/  Set AT+FTIME=150
843 843  
844 844  
875 +
845 845  === 3.2.9 Set PDOP value for GPS fix accuracy ===
846 846  
847 847  
... ... @@ -866,7 +866,7 @@
866 866  
867 867  
868 868  
869 -**Disable/Enable the confirmation mode**
900 +Disable/Enable the confirmation mode
870 870  
871 871  * (% style="color:blue" %)**AT Command:**
872 872  
... ... @@ -885,6 +885,7 @@
885 885  (% style="color:#037691" %)**0x05 01 **(%%) ~/~/  Same as AT+CFM=1
886 886  
887 887  
919 +
888 888  === 3.2.10  Auto Send None-ACK messages ===
889 889  
890 890  
... ... @@ -906,6 +906,7 @@
906 906  Example: 0x3401  ~/~/  Same as AT+PNACKMD=1
907 907  
908 908  
941 +
909 909  === 3.2.11  Set BLEMASK to filter BLE iBeacon ===
910 910  
911 911  
... ... @@ -924,6 +924,7 @@
924 924  Example: 0xB2010203040506    ~/~/ Set BLEMASK to 123456
925 925  
926 926  
960 +
927 927  === 3.2.12  Set WiFIMASK to filter WiFi SSID（Since firmware 1.4.1） ===
928 928  
929 929  
... ... @@ -942,6 +942,7 @@
942 942  Example: 0xB3010203040506    ~/~/ Set WiFiMASK to 123456
943 943  
944 944  
979 +
945 945  === 3.2.13 Disable/Enable Information printing（Since firmware 1.4.1） ===
946 946  
947 947  
... ... @@ -953,6 +953,7 @@
953 953  \\Example: AT+SHOWID=1 ~-~-> Enable Information printing.
954 954  
955 955  
991 +
956 956  === 3.2.14 Get or Set Eight Channels Mode, only for us915, AU915（Since firmware 1.4.1） ===
957 957  
958 958  
... ... @@ -963,11 +963,12 @@
963 963  (% style="color:#037691" %)**AT+CHE=1**(%%) ~/~/ set one channels mode
964 964  
965 965  
966 -(% style="color:blue" %)**Downlink Payload:0X24**
1002 +(% style="color:blue" %)**Downlink Payload:0X24**(%%)
967 967  
968 968  Example: 0x24 01 ~/~/ Same as AT+CHE=1
969 969  
970 970  
1007 +
971 971  = 4. Setting for Different Scenarios =
972 972  
973 973  
... ... @@ -974,6 +974,7 @@
974 974  
975 975  = 5. Upload Firmware =
976 976  
1014 +
977 977  == 5.1 Firmware Change Log ==
978 978  
979 979  
... ... @@ -980,6 +980,7 @@
980 980  **[[See this link>>url:https://github.com/dragino/TrackerD]]**
981 981  
982 982  
1021 +
983 983  == 5.2 How to upgrade firmware ==
984 984  
985 985  
... ... @@ -1012,27 +1012,29 @@
1012 1012  [[https:~~/~~/github.com/dragino/TrackerD/releases>>https://github.com/dragino/TrackerD/releases]]
1013 1013  
1014 1014  
1015 -**Users need to use below files:**
1054 +Users need to use below files:
1016 1016  
1017 1017  boot_app0.bin @0e000
1018 1018  
1019 -US915.bin @ 0x10000(Select the bin file of the frequency band you need)
1058 +ESP_LORA-eeprom-class.bin @ 0x10000
1020 1020  
1021 1021  
1022 -[[image:image-20221118105220-2.png]]
1061 +[[image:1664503593459-435.png]]
1023 1023  
1024 1024  
1025 1025  
1026 1026  After upgrade finish, it will show finish as below:
1027 1027  
1028 -[[image:image-20221118105402-4.png]]
1067 +[[image:1664503611848-385.png]]
1029 1029  
1030 1030  
1031 1031  
1032 1032  = 6. Developer Guide =
1033 1033  
1073 +
1034 1034  == 6.1 Compile Source Code ==
1035 1035  
1076 +
1036 1036  === 6.1.1 Set up ARDUINO compile environment ===
1037 1037  
1038 1038  
... ... @@ -1070,6 +1070,7 @@
1070 1070  [[image:1664503752288-974.png]]
1071 1071  
1072 1072  
1114 +
1073 1073  == 6.2 Source Code ==
1074 1074  
1075 1075  
... ... @@ -1090,8 +1090,10 @@
1090 1090  [[image:1664503824081-592.png]] [[image:1664503831430-500.png]]
1091 1091  
1092 1092  
1135 +
1093 1093  = 7.  FAQ =
1094 1094  
1138 +
1095 1095  == 7.1 How to change the LoRa Frequency Bands/Region? ==
1096 1096  
1097 1097  
... ... @@ -1098,6 +1098,7 @@
1098 1098  User can follow the introduction for [[how to upgrade image>>||anchor="H5.UploadFirmware"]]. When download the images, choose the required image file for download.
1099 1099  
1100 1100  
1145 +
1101 1101  == 7.2 What is the pin mapping for the USB program cable? ==
1102 1102  
1103 1103  
... ... @@ -1116,29 +1116,31 @@
1116 1116  |(% style="width:118px" %)A8|(% style="width:67px" %)Yellow|(% style="width:123px" %)MTMS/GPIO14
1117 1117  |(% style="width:118px" %)B8|(% style="width:67px" %)Grey|(% style="width:123px" %)MTDO/GPIO15
1118 1118  
1119 -
1120 1120  == 7.3 Notes on using different serial port tools for TrackerD ==
1121 1121  
1122 -=== 7.3.1  Serial port utility ===
1123 1123  
1167 +=== **Serial port utility** ===
1124 1124  
1169 +
1125 1125  Serial port utility requires you to automatically add data streams.
1126 1126  
1127 1127  Need to adjust the data stream to RTS/CTS on physical restart.
1128 1128  
1174 +
1129 1129  (% class="wikigeneratedid" %)
1130 1130  [[image:image-20221102140621-1.png]]
1131 1131  
1132 1132  
1133 -
1134 1134  When using AT commands, the data flow needs to be adjusted to XON/XOFF
1135 1135  
1181 +
1136 1136  [[image:image-20221102140638-2.png]]
1137 1137  
1138 1138  
1139 -=== 7.3.2  SecureCRT ===
1140 1140  
1186 +=== **SecureCRT** ===
1141 1141  
1188 +
1142 1142  The default command window of SecureCRT is not displayed. Entering a command requires a complete input of the entire command. You can open the command window in the view.
1143 1143  
1144 1144  
... ... @@ -1148,9 +1148,10 @@
1148 1148  [[image:image-20221102140712-4.png]]
1149 1149  
1150 1150  
1151 -=== 7.3.3  PUTTY ===
1152 1152  
1199 +=== **PUTTY** ===
1153 1153  
1201 +
1154 1154  [[image:image-20221102140748-5.png]]
1155 1155  
1156 1156  
... ... @@ -1160,151 +1160,25 @@
1160 1160  [[image:image-20221102140801-6.png]]
1161 1161  
1162 1162  
1163 -== 7.4 How to modify source code to compile different frequency band bin file? ==
1164 -
1165 -
1166 -(% class="box infomessage" %)
1167 -(((
1168 -(% style="color:red" %)**Important**(%%): Developer **MUST** follow the Arduino Environment Instruction exactly include change the SPI pin mappings.
1169 -See : [[**Set Up Arduino Compile Environment for TrackerD**. >>||anchor="H6.1.1SetupARDUINOcompileenvironment"]]
1170 -)))
1171 -
1172 -**~1. When compiling the frequency band, you need to find LMIC_PROJECT_CONFIG.H file.**
1173 -
1174 -
1175 -[[image:image-20221116111844-1.png||height="227" width="782"]]
1176 -
1177 -
1178 -
1179 -**2. Open LMIC_PROJECT_CONFIG.H, find the corresponding macro definition and open it(AS923_2,AS923_3,AS923_4 except).**
1180 -
1181 -
1182 -[[image:image-20221116111844-2.png||height="262" width="781"]]
1183 -
1184 -
1185 -
1186 -**3. Compile the AS923_JP band, please refer to the intention shown**
1187 -
1188 -
1189 -[[image:image-20221116111844-3.png||height="338" width="746"]]
1190 -
1191 -
1192 -
1193 -**4. In other frequency bands in AS923, you need to find Lorabase_as923.H, path arduino-lmic \ src \ lmic, as shown in the figure below.**
1194 -
1195 -
1196 -[[image:image-20221116111844-4.png||height="641" width="739"]]
1197 -
1198 -
1199 -[[image:image-20221116111844-5.png||height="551" width="708"]]
1200 -
1201 -
1202 1202  = 8  Trouble Shooting =
1203 1203  
1204 -== 8.1  TDC is changed to 4294947296 and cause no uplink. ==
1213 +== 8.1 TDC is changed to 4294947296 and cause no uplink. ==
1205 1205  
1206 -
1207 -(((
1208 1208  Before firmware v1.4.0: When the Transport Mode is enabled (**AT+INTWK=1**), the **TDC** needs to be greater than **MTDC**, otherwise, TDC setting will because 4294947296 after wakre up from motion. This bug is fixed in firmware v1.4.1
1209 -)))
1210 1210  
1211 1211  
1212 -== 8.2  Device not able get AT Command or show output after wake up from deep sleep mode ==
1218 +== 8.2 Device not able get AT Command or show output after wake up from deep sleep mode ==
1213 1213  
1214 -
1215 -(((
1216 1216  ESP32 is not able to accept the Interrupt from UART after wake up from deep sleep mode. User need to press the button (one click) and trackerD will be able to accept UART command, it there is no action in UART for 15 seconds. it will go to deep sleep mode.
1217 -)))
1218 1218  
1219 1219  
1220 -== 8.3  Problem after Upgrading Firmware ==
1223 +== 8.3 The reason why it has been restarted after upgrading（V.1.4.1） ==
1221 1221  
1222 -=== 8.3.1 Continue Restart after upgrading ===
1223 -
1224 -
1225 -(((
1226 1226  If it is V1.4.0 and the previous version, new partitions need to be loaded when upgrading. The new version of the software is stored in the partition package. The upgrade method is shown in the figure
1227 -)))
1228 1228  
1227 +[[image:image-20221107145243-1.png||height="695" width="443"]]
1229 1229  
1230 -[[image:image-20221118105249-3.png]]
1231 1231  
1232 -
1233 -=== 8.3.2 TrackerD's led light is always GREEN on after upgrading ===
1234 -
1235 -
1236 -It is because the partitions are different when upgrading versions above 1.4.1, and a new partition file needs to be added. Please refer to the operation steps in chapter 8.3.1
1237 -
1238 -
1239 -=== 8.3.3 "flash read err" after upgrade firmware ===
1240 -
1241 -Error shows below, user might erase the entire flash include u-boot partition which cause this issue.
1242 -
1243 -[[image:image-20221122100004-1.png||height="497" width="534"]]
1244 -
1245 -
1246 -User need to upgrade again with below four files to solve this issue.
1247 -
1248 - [[image:image-20221122100004-2.png||height="619" width="389"]]
1249 -
1250 - **Figure 2**
1251 -
1252 -
1253 -=== 8.3.3 "Device Key become ff ff ff ff ff ff ff ff " after upgrade firmware ===
1254 -
1255 -User might erase the entire flash include keys and default settings which cause this issue.
1256 -
1257 -After the upgrade is completed, enter AT+CFG as shown in the figure below.
1258 -
1259 -[[image:image-20221122100004-3.png]]
1260 -
1261 -Please **AT+FDR** which will reset all settings to factory settings. , and then input the following keys by the information on the label.
1262 -
1263 -
1264 -Example:
1265 -
1266 -AT+DEUI=70B3D57ED0053981  
1267 -
1268 -AT+APPEUI=D23345667BCBCCAF
1269 -
1270 -AT+APPKEY=F402A1A7A350445A7CD2DEA95511BFA1
1271 -
1272 -AT+DADDR=260b4dce    ( no need for OTAA)
1273 -
1274 -AT+NWKSKEY=71cb7672441f573a53d4f34d307fc61d  ( no need for OTAA)
1275 -
1276 -AT+APPSKEY=dacce2299ecd97a73ee3f80b5a46a559   ( no need for OTAA)
1277 -
1278 -
1279 -
1280 -==== 8.3.4  If there is a situation in Figure 1, and a new partition file needs to be added. Please refer to the operation steps in chapter 8.3.1 ====
1281 -
1282 -
1283 -[[image:image-20221122100004-4.png]]
1284 -
1285 -
1286 -== 8.4  When positioning, it will restart or the PDOP setting is unsuccessful ==
1287 -
1288 -
1289 -Please download version 1.4.2 again
1290 -
1291 -
1292 -== 8.5  How to deal with unsuccessful GPS positioning? ==
1293 -
1294 -
1295 -1） Make Sure the device is in Open Area where can see the sky.
1296 -
1297 -2)  Set PDOP to a higher value.
1298 -
1299 -* (% style="color:blue" %)**AT+PDOP=2 **(%%)(can be positioned precisely.）
1300 -
1301 -* (% style="color:blue" %)**AT+PDOP=7 **(%%)(Quickly locate in open spaces）
1302 -
1303 -* (% style="color:blue" %)**AT+PDOP=14.7** (%%)(Positioning can be acquired in complex environments）
1304 -
1305 -Please refer to this [[link>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/TrackerD/#H3.2.9SetPDOPvalueforGPSfixaccuracy]] on how to set up PDOP
1306 -
1307 -
1308 1308  = 9.  Order Info =
1309 1309  
1310 1310  
... ... @@ -1313,20 +1313,13 @@
1313 1313  (% style="color:blue" %)**XXX**(%%): The default frequency band
1314 1314  
1315 1315  * (% style="color:red" %)**EU433**(%%): Default frequency band EU433
1316 -
1317 1317  * (% style="color:red" %)**EU868**(%%): Default frequency band EU868
1318 -
1319 1319  * (% style="color:red" %)**IN865**(%%): Default frequency band IN865
1320 -
1321 1321  * (% style="color:red" %)**KR920**(%%): Default frequency band KR920
1322 -
1323 1323  * (% style="color:red" %)**AS923**(%%): Default frequency band AS923
1324 -
1325 1325  * (% style="color:red" %)**AU915**(%%): Default frequency band AU915
1326 -
1327 1327  * (% style="color:red" %)**US915**(%%): Default frequency band US915
1328 1328  
1329 -
1330 1330  = 10.  Packing Info =
1331 1331  
1332 1332  
... ... @@ -1333,29 +1333,24 @@
1333 1333  (% style="color:#037691" %)**Package Includes**:
1334 1334  
1335 1335  * TrackerD LoRaWAN GPS/BLE Tracker x 1
1336 -
1337 1337  * USB recharge & program cable x 1
1338 1338  
1339 1339  (% style="color:#037691" %)**Dimensions and Weight**:
1340 1340  
1341 1341  * Device Size: 85 x 48 x 15 mm
1342 -
1343 1343  * Weight: 50g
1344 1344  
1345 -
1346 1346  = 11. Support =
1347 1347  
1348 1348  
1349 1349  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1350 -
1351 1351  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]].
1352 1352  
1353 -
1354 1354  = 12.  Reference =
1355 1355  
1356 1356  
1357 1357  * [[**Firmware in Bin format**>>https://www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0]]
1358 -
1359 1359  * **[[Source Code>>https://github.com/dragino/TrackerD]] **
1360 -
1361 1361  * [[**Hardware Source**>>https://www.dropbox.com/sh/orwoy6cecb89m4e/AAD37sRuUrvKsHgAJxuVTkB5a?dl=0]]
1270 +
1271 +
image-20221116111844-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -15.8 KB
Content
image-20221116111844-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -32.6 KB
Content
image-20221116111844-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -37.0 KB
Content
image-20221116111844-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -96.8 KB
Content
image-20221116111844-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -78.0 KB
Content
image-20221118104359-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -38.0 KB
Content
image-20221118105220-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -40.2 KB
Content
image-20221118105249-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -40.2 KB
Content
image-20221118105402-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -43.7 KB
Content
image-20221122100004-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -18.0 KB
Content
image-20221122100004-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -127.2 KB
Content
image-20221122100004-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -12.5 KB
Content
image-20221122100004-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -22.3 KB
Content