Skip to Content
Last modified by Bei Jinggeng on 2025/07/23 11:03
From version 113.7
edited by Xiaoling
on 2022/11/09 17:02
Change comment: There is no comment for this version
To version 53.1
edited by Edwin Chen
on 2022/10/06 18:13
Change comment: Uploaded new attachment "image-20221006181316-1.png", version {1}

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -97,6 +97,7 @@
97 97  * LoRa Transmit Mode: 125mA @ 20dBm 44mA @ 14dBm
98 98  * Tracking: max: 38mA
99 99  
100 +
100 100  == 1.3  Features ==
101 101  
102 102  
... ... @@ -115,6 +115,7 @@
115 115  * Tri-color LED, Alarm button
116 116  * Datalog
117 117  
119 +
118 118  == 1.4  Applications ==
119 119  
120 120  
... ... @@ -121,9 +121,10 @@
121 121  * Logistics and Supply Chain Management
122 122  * Human tracking
123 123  
124 -= 2.  Use TrackerD =
125 125  
127 += 2.1 Use TrackerD =
126 126  
129 +
127 127  == 2.1 How it works? ==
128 128  
129 129  
... ... @@ -172,10 +172,11 @@
172 172  **__Add APP KEY and DEV EUI:__**
173 173  
174 174  
175 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS02%20-%20LoRaWAN%20Door%20Sensor%20User%20Manual/WebHome/1654671889112-678.png?rev=1.1||alt="1654671889112-678.png"]]
178 +[[image:1664501784668-703.png]]
176 176  
177 177  
178 178  
182 +
179 179  (% style="color:blue" %)**Step 2**:(%%) Power on TrackerD by using the on board switch.
180 180  
181 181  
... ... @@ -182,130 +182,42 @@
182 182  (% style="color:blue" %)**Step 3:**(%%) TrackerD will auto join to the LoRaWAN network. After join success, TrackerD will start to upload message to IoT server.
183 183  
184 184  
189 += 2.3 Positioning Mode(SMOD) =
185 185  
186 -== 2.3  Positioning Mode(SMOD) ==
191 +* (% style="color:#037691" %)**GPS ONLY(Factory Settings):    **(%%)only get GPS location info.
192 +* (% style="color:#037691" %)**BLE ONLY:              **(%%)Only obtain iBeacon info via BLE. Design for Indoor tracking.
193 +* (% style="color:#037691" %)**GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.
187 187  
195 +User can switch modes by [[changing SMOD>>||anchor="H3.2.7SetPositioningMode"]].
188 188  
189 -Users can set TrackerD to different Positioning Mode for different applications. Below mod are supported.
190 190  
191 -* (% style="color:#037691" %)**GPS ONLY(Factory Settings):    **(%%)Only get and uplink GPS location info.
192 -* (% style="color:#037691" %)**BLE or WiFi ONLY:            **(%%)** **Only obtain iBeacon info via BLE and uplink  or obtain wifi ssid info via WiFi and uplink. Design for Indoor tracking.
193 -* (% style="color:#037691" %)**GPS/BLE Hybrid:                        **(%%)Combination for Indoor and Outdoor tracking. Devices will try to search BLE iBeacon first. If device can't find the iBeacon, it will use GPS for positioning.
194 194  
195 -Users can switch modes by [[changing SMOD>>||anchor="H3.2.7SetPositioningMode"]].
199 +== 2.3 Uplink Payload ==
196 196  
197 197  
202 +=== 2.3.1 Uplink FPORT~=5, Device Status ===
198 198  
199 -== 2.4  Uplink Payload ==
200 200  
201 201  
202 -=== 2.4.1 Uplink FPORT~=5, Device Status ===
206 +=== 2.3.2 Uplink FPORT~= , Realtime GNSS Positioning ===
203 203  
204 204  
205 -Uplink the device configures with FPORT=5. Once TrackerD Joined the network, it will uplink this message to the server. After the first uplink, TrackerD will uplink Device Status every 12 hours.
209 +The default uplink payload includes totally 11 bytes. (User can use AT+MOD=0 to enable the Temperature and humidity sensor to hum/tem info from accelerometer. When accelerometer info is enable, total payload will be 15 bytes, please note 15 bytes won't work on DR0 on US915/AU915 frequency band. )
206 206  
207 -Use can also get the Device Status uplink through the downlink command: **Downlink:  0x2301**
208 208  
209 -
210 -(% border="1.5" style="background-color:#ffffcc; color:green; width:440px" %)
211 -|=(% style="width: 60px;" %)**Size(bytes)**|=(% style="width: 70px;" %)**1**|=(% style="width: 70px;" %)**2**|=(% style="width: 70px;" %)**1**|=(% style="width: 50px;" %)**1**|=(% style="width: 30px;" %)2|=(% style="width: 40px;" %)**2**|=(% style="width: 40px;" %)1
212 -|=(% style="width: 108px;" %)**Value**|(% style="width:82px" %)Sensor Model|(% style="width:83px" %)Firmware Version|(% style="width:94px" %)Frequency Band|(% style="width:84px" %)Sub-band|(% style="width:44px" %)BAT|(% style="width:63px" %)SMOD|(% style="width:60px" %)Status
213 -
214 -[[image:1665301570342-765.png]]
215 -
216 -
217 -(% style="color:#037691" %)**Example of Device Status:**(%%) 13014001FF0FA24002
218 -
219 -(% style="color:#037691" %)**Sensor Model:** (%%) For TrackerD,this value is 0x13
220 -
221 -(% style="color:#037691" %)**Firmware Version: **(%%) 0x0140,Means:v1.4.0 version
222 -
223 -(% style="color:#037691" %)**Frequency Band**:
224 -
225 -*0x01: EU868
226 -
227 -*0x02: US915
228 -
229 -*0x03: IN865
230 -
231 -*0x04: AU915
232 -
233 -*0x05: KZ865
234 -
235 -*0x06: RU864
236 -
237 -*0x07: AS923
238 -
239 -*0x08: AS923-1
240 -
241 -*0x09: AS923-2
242 -
243 -*0x0a: AS923-3
244 -
245 -Sub- Band:value 0x00~~0x08(only forAU915,US915,Others are 0xFF)
246 -
247 -(% style="color:#037691" %)**BAT:**(%%) shows the battery voltage for TrackerD.
248 -
249 -
250 -(% style="color:#037691" %)**Ex1:**(%%) 0x0FA2 = 4002mV
251 -
252 -Use can also get the Device Status uplink through the downlink command:
253 -
254 -
255 -(% style="color:#037691" %)**SMOD Field (total 1 byte)**(%%)：0x40
256 -
257 -(% border="1.5" style="background-color:#ffffcc; color:green; width:270px" %)
258 -|=(% scope="row" style="width: 60px;" %)**Size(bit)**|(% style="width:50px" %)2bits|(% style="width:80px" %)2bit|(% style="width:80px" %)4bit
259 -|=(% style="width: 75px;" %)**Value**|(% style="width:64px" %)SMOD|(% style="width:104px" %)GPS_Settings|(% style="width:103px" %)BLE_Settings
260 -
261 -(% style="color:blue" %)** SMOD：**
262 -
263 -(% style="color:red" %)** 1 :** (%%) GPS ONLY
264 -
265 -(% style="color:red" %)** 2 :** (%%) BLE ONLY
266 -
267 -(% style="color:red" %)** 3 :**  (%%) GPS/BLE Hybrid
268 -
269 -
270 -(% style="color:blue" %)** GPS_MOD: Define how to send GPS payload**
271 -
272 -(% style="color:red" %)** 0 : ** (%%) Enable uploading on-board Temperature and humidity values
273 -
274 -(% style="color:red" %)** 1 :** (%%) Disable uploading on-board Temperature and humidity values
275 -
276 -
277 -(% style="color:blue" %)** BLE_Settings:**
278 -
279 -(% style="color:red" %)** 1: ** (%%) BLE Positioning with Strongest iBeacon
280 -
281 -(% style="color:red" %)** 2：**  (%%)WiFi Positioning with Strongest WiFi SSID(% style="color:blue" %)(V1.4.1 Version support this function later)(%%)  
282 -
283 -
284 -(% style="color:#037691" %)**Status Field (total 1 byte)**(%%):  0x02
285 -
286 -(% border="1.5" style="background-color:#ffffcc; color:green; width:260px" %)
287 -|=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)5 Bits|(% style="width:60px" %)1 Bit|(% style="width:20px" %)1 Bit|(% style="width:80px" %)1 Bit
288 -|=(% style="width: 77px;" %)**Value**|(% style="width:70px" %)Reserve|(% style="width:92px" %)[[PNACKMD>>||anchor="H2.4.4A0UplinkFPORT3D42CHistoryGNSSPositioning"]]|(% style="width:48px" %)[[LON>>||anchor="H3.2.5Disable2FEnableLEDflash"]]|(% style="width:126px" %)[[Transport Mode>>||anchor="H2.9TransportMode"]]
289 -
290 -=== 2.4.2 Uplink FPORT~=2, Realtime GNSS Positioning + Temperature & Humidity ===
291 -
292 -
293 -Users can use **AT+SMOD=1,0,0** to enable uploading on-board Temperature and humidity values, and the total payload will be 15 bytes,
294 -
295 -
296 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:320px" %)
297 -|=(% scope="row" style="width: 60px;" %)(((
212 +(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:480px" %)
213 +|=(% scope="row" style="width: 50px;" %)(((
298 298  **Size(bytes)**
299 -)))|(% style="width:50px" %)4|(% style="width:50px" %)4|(% style="width:70px" %)2|(% style="width:30px" %)1|(% style="width:30px" %)(((
300 -2
301 -)))|(% style="width:30px" %)(((
302 -2
215 +)))|(% style="width:60px" %)4|(% style="width:70px" %)4|(% style="width:80px" %)2|(% style="width:50px" %)1|(% style="width:88px" %)(((
216 +2(optional)
217 +)))|(% style="width:87px" %)(((
218 +2(optional)
303 303  )))
304 304  |=(% style="width: 69px;" %)**Value**|(% style="width:76px" %)[[Latitude>>||anchor="HLocationinfo:"]]|(% style="width:87px" %)[[Longitude>>||anchor="HLocationinfo:"]]|(% style="width:76px" %)(((
305 305  [[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
306 -)))|(% style="width:73px" %)[[FLAG>>||anchor="HFLAG:"]]|(% style="width:40px" %)[[Hum>>||anchor="HHum:"]]|(% style="width:87px" %)[[Tem>>||anchor="HTem:"]]
222 +)))|(% style="width:52px" %)[[FLAG>>||anchor="HFLAG:"]]|(% style="width:88px" %)[[Hum>>||anchor="HHum:"]]|(% style="width:87px" %)[[Tem>>||anchor="HTem:"]]
307 307  
308 -[[image:1665301636888-168.png]]
224 +[[image:1664501958445-288.png]]
309 309  
310 310  
311 311  ==== (% style="color:blue" %)**Alarm & BAT:**(%%) ====
... ... @@ -316,9 +316,9 @@
316 316  
317 317  ==== (% style="color:blue" %)**FLAG:**(%%) ====
318 318  
319 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:120px" %)
320 -|=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:30px" %)2bits|(% style="width:30px" %)1bit
321 -|=(% style="width: 79px;" %)**Value**|(% style="width:55px" %)[[MOD>>||anchor="H3.2.7SetPositioningMode"]]|(% style="width:47px" %)[[LON>>||anchor="HLON:"]]
235 +(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:250px" %)
236 +|=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)2bits|(% style="width:50px" %)1bit|(% style="width:100px" %)5 bits
237 +|=(% style="width: 79px;" %)**Value**|(% style="width:55px" %)[[MOD>>||anchor="H3.2.7SetPositioningMode"]]|(% style="width:47px" %)[[LON>>||anchor="HLON:"]]|(% style="width:140px" %)Firmware version 
322 322  
323 323  **Example:** Payload: 0x02863D68 FAC29BAF 4B45 60 0202 011A 
324 324  
... ... @@ -328,18 +328,22 @@
328 328  * Latitude: 02863D68  ⇒  //if (0x//02863D68//& 0x80000000 = 0 )~://  //value = 02863D68 /1000000 = 42.351976//
329 329  * Longitude: FAC29BAF  ⇒ //if (0x//FAC29BAF// & 0x80000000 = 1 )~://  //value = (0x//FAC29BAF// – 0x 100000000)/1000000 =//-87.9094//57//
330 330  
247 +
331 331  (% style="color:red" %)**Important note:**
332 332  
333 333  1.  When power is low (<2.84v), GPS won't be able to get location info and GPS feature will be disabled and the location field will be filled with 0x0FFFFFFF, 0x0FFFFFFF.
334 334  
335 -2.  In this mode, the total payload will be 15 bytes, while US915/AU915 DR0 accepts only 11 bytes payload. In this case, the payload on server will be ignore and shows as below:
252 +2.  In firmware version v1.5, Roll & Pitch is disabled by default.
336 336  
254 +3.  When enable 9-axis motion sensor, the total payload will be 15 bytes, while US915/AU915 DR0 accept only 11 bytes payload. In this case, the payload on server will be ignore and shows as below:
337 337  
256 +
338 338  [[image:1664502116362-706.png]]
339 339  
340 340  
341 -3.  While GPS can't get location info after timeout(FTIME Parameter), the latitude and longitude will be filled with all 0x00:
342 342  
261 +4.  While GPS can't get location info after timeout(FTIME Parameter), the latitude and longitude will be filled with all 0x00:
262 +
343 343  [[image:1664502166010-515.png]]
344 344  
345 345  
... ... @@ -346,15 +346,15 @@
346 346  
347 347  ==== (% style="color:blue" %)**Alarm:**(%%) ====
348 348  
349 -**Example: ** 0x4B & 0x40 >> 6 = 0x01
269 +Example:  0x4B & 0x40 >> 6 = 0x01
350 350  
351 351  
352 352  ==== (% style="color:blue" %)**BAT:**(%%) ====
353 353  
354 -**Example: ** 0x4B45 & 0x3FFF ⇒ 2885 (mV).
274 +Example:  0x0CDD & 0x3FFF ⇒ 3293 (mV).
355 355  
356 356  (((
357 -The battery info shows the battery voltage, User can use the below mapping to indicate the battery in percentage: \
277 +The battery info shows the current voltage, for (% style="color:blue" %)**TrackerD**(%%) version which powered by li-on battery. User can use below mapping to indicate the battery in percentage: \
358 358  )))
359 359  
360 360  * > 4.0v :  80% ~~ 100%
... ... @@ -363,33 +363,18 @@
363 363  * 3.40v ~~ 3.69v:  20% ~~ 40%
364 364  * < 3.39v:  0~~20%
365 365  
366 -==== (% style="color:blue" %)**MOD:**(%%) ====
367 367  
368 -**Example: ** (0x60>>6) & 0x3f =1
369 -
370 -**Set the format of GPS data uplink link：**
371 -
372 -(% style="color:#037691" %)**0x00:** (%%) Enable uploading on-board Temperature and humidity values
373 -(% style="color:#037691" %)**0x01: ** (%%) Disable uploading on-board Temperature and humidity values
374 -
375 -
376 -**Set the format of BLE data uplink link：**
377 -
378 -(% style="color:#037691" %)**0x01: ** (%%) BLE Positioning with Strongest iBeacon
379 -
380 -
381 381  ==== (% style="color:blue" %)**LON:**(%%) ====
382 382  
383 -**Example:** (0x60>>5) & 0x01=1.
384 384  
385 385  Enable/Disable LED activity for uplink
386 386  
387 387  (((
388 -(% style="color:#037691" %)**0x00:**  (%%) Disable LED indicator.
293 +0x00:  Disable LED indicator.
389 389  )))
390 390  
391 391  (((
392 -(% style="color:#037691" %)**0x01:**  (%%) Enable LED indicator (Default Value)
297 +0x01:  Enable LED indicator (Default Value)
393 393  )))
394 394  
395 395  
... ... @@ -404,57 +404,15 @@
404 404  
405 405  
406 406  
407 -=== 2.4.3  Uplink FPORT~=3, Realtime GNSS Positioning (Default Mode) ===
312 +=== 2.3.3 Uplink FPORT~= , History GNSS Positioning ===
408 408  
409 409  
410 -The default uplink payload includes total 11 bytes (**AT+SMOD=1,1,0**). The payload is the first 11 bytes of Uplink FPORT=2, real-time GNSS positioning, (remove the temp and humidity)
411 411  
316 +=== 2.3.4 BLE positioning Payload(Fport2) ===
412 412  
413 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:300px" %)
414 -|=(% scope="row" style="width: 60px;" %)(((
415 -**Size(bytes)**
416 -)))|(% style="width:60px" %)4|(% style="width:60px" %)4|(% style="width:60px" %)2|(% style="width:50px" %)1
417 -|=(% style="width: 69px;" %)**Value**|(% style="width:76px" %)[[Latitude>>||anchor="HLocationinfo:"]]|(% style="width:87px" %)[[Longitude>>||anchor="HLocationinfo:"]]|(% style="width:76px" %)(((
418 -[[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
419 -)))|(% style="width:73px" %)[[FLAG>>||anchor="HFLAG:"]]
420 420  
421 -(% class="wikigeneratedid" %)
422 -[[image:1665301687277-443.png]]
319 +Different MODE has different payload:  (% style="color:blue" %)**MODE=2**
423 423  
424 -
425 -
426 -=== 2.4.4  Uplink FPORT~=4, History GNSS Positioning ===
427 -
428 -
429 -Set [[PNACKMD=1>>||anchor="H3.2.10A0A0AutoSendNone-ACKmessages"]], and TrackerD will wait for ACK for every uplink, when there is no LoRaWAN network, TrackerD will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
430 -
431 -
432 -(% style="color:red" %)**Note for this mode:**
433 -
434 -* a) TrackerD will do an ACK check for data records sending to make sure every data arrive server.
435 -* b) TrackerD will send data in CONFIRMED Mode when PNACKMD=1 and CFM=1, but TrackerD won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink, if TrackerD gets an ACK, TrackerD will consider there is a network connection and resend all NONE-ACK Messages.
436 -* c) the total payload will be 15 bytes, while US915/AU915 DR0 accepts only 11 bytes of payload. In this case (DR0 of US915/AU915), the payload on server will show NULL
437 -
438 -The payload is 15 bytes, as below.
439 -
440 -(% border="1.5" style="background-color:#ffffcc; color:green; width:500px" %)
441 -|=(% scope="row" %)(((
442 -**Size(bytes)**
443 -)))|4|4|2|1|1|1|1|1
444 -|=**Value**|Latitude|Longitude|Year|Month|Day|Hous|Min|Sen
445 -
446 -[[image:image-20221009160309-2.png]]
447 -
448 -
449 -
450 -=== 2.4.5  Uplink FPORT~=6, BLE Positioning with Strongest iBeacon ===
451 -
452 -
453 -TrackerD supports BLE scans for indoor positioning. User can set [[**SMOD**>>||anchor="H3.2.7SetPositioningMode"]] to **BLE pure** or **GPS/BLE hybrid** so TrackerD will scan BLE iBeacon and find the strongest iBeacon info and uplink.
454 -
455 -User can set **[[BLEMASK>>||anchor="H3.2.11A0SetBLEMASKtofilterBLEiBeacon"]]** so TrackerD will only search the iBeacons which have UUID that match the BLEMASK settings.
456 -
457 -
458 458  (% border="1.5" cellspacing="3" style="background-color:#ffffcc; color:green; width:450px" %)
459 459  |=(% scope="row" style="width: 60px;" %)(((
460 460  **Size(bytes)**
... ... @@ -474,7 +474,7 @@
474 474  [[image:1664502425687-834.png]]
475 475  
476 476  
477 -* (% style="color:#037691" %)**BAT: ** (%%) Ex1:0x4B45 & 0x3FFF ⇒ 3901 (mV).
340 +* (% style="color:#037691" %)**BAT: ** (%%) Ex1: 0x4B45 & 0x3FFF ⇒ 3901 (mV).
478 478  * (% style="color:#037691" %)**MODE:   **(%%)Define the payload format.
479 479  * (% style="color:#037691" %)**UUID:     **(%%)The uuid from the strongest iBeacon.
480 480  * (% style="color:#037691" %)**MAJOR:** (%%) The MAJOR from the strongest iBeacon.
... ... @@ -482,33 +482,12 @@
482 482  * (% style="color:#037691" %)**Measured Power: ** (%%) The Measured Power from the strongest iBeacon.
483 483  * (% style="color:#037691" %)**RSSI:  ** (%%) The RSSI from the strongest iBeacon.
484 484  
485 -=== 2.4.6  Uplink FPORT~=8, WiFi Positioning with Strongest WiFi SSID（Since firmware 1.4.1） ===
486 486  
349 +=== 2.3.5 Add Payload format in TTN V3 ===
487 487  
488 -TrackerD supports WiFi scans for indoor positioning. User can set [[**SMOD**>>||anchor="H3.2.7SetPositioningMode"]] to **WiFi** so TrackerD will scan WiFi and find the strongest WiFi info and uplink.
489 489  
352 +In TTN V3, use can add a custom payload so it shows friendly.
490 490  
491 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:371.222px" %)
492 -|=(% scope="row" style="width: 60px;" %)(((
493 -**Size(bytes)**
494 -)))|(% style="width:60px" %)6|(% style="width:60px" %)4|(% style="width:79px" %)2|(% style="width:66px" %)1
495 -|=(% style="width: 69px;" %)**Value**|(% style="width:76px" %)SSID|(% style="width:87px" %)RSSI|(% style="width:79px" %)(((
496 -[[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
497 -)))|(% style="width:66px" %)[[FLAG>>||anchor="HFLAG:"]]
498 -
499 -(% class="wikigeneratedid" %)
500 -[[image:1667288597595-714.png||height="212" width="1151"]]
501 -
502 -
503 -* (% style="color:#037691" %)**BAT: ** (%%) Ex1:0x4B45 & 0x3FFF ⇒ 3901 (mV).
504 -* (% style="color:#037691" %)**SSID:      **(%%)WiFi name.
505 -* (% style="color:#037691" %)**RSSI:      **(%%)The RSSI from the strongest WiFi.
506 -
507 -=== 2.4.7  Add Payload format in TTN V3 ===
508 -
509 -
510 -In TTN V3, user can add a custom payload so it shows friendly.
511 -
512 512  In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**
513 513  
514 514  
... ... @@ -515,9 +515,8 @@
515 515  [[image:1664502649601-895.png]]
516 516  
517 517  
518 -Add the decoder from this link: 
360 +Add the decoder from this link:
519 519  
520 -[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/TrackerD>>https://github.com/dragino/dragino-end-node-decoder/tree/main/TrackerD]]
521 521  
522 522  Save the change the uplink message will be parsed. As below:
523 523  
... ... @@ -525,12 +525,16 @@
525 525  
526 526  
527 527  
528 -== 2.5 Integrate with Datacake ==
369 +== 2.4 Integrate with Datacake ==
529 529  
530 530  
372 +(((
531 531  After TrackerD sends data to LoRaWAN server such as TTN, use can pass the data to Datacake and plot out, currently only support GPS plot.
374 +)))
532 532  
376 +(((
533 533  Instruction is here:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20Data%20Cake/#H7.Example~~-~~-AddTrackerDGPSTrackingInDataCake>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20Data%20Cake/#H7.Example--AddTrackerDGPSTrackingInDataCake]]
378 +)))
534 534  
535 535  
536 536  [[image:1664502695771-538.png]]
... ... @@ -537,12 +537,16 @@
537 537  
538 538  
539 539  
540 -== 2.6 Integrate with Tago ==
385 +== 2.5 Integrate with Tago ==
541 541  
542 542  
543 -After TrackerD sends data to LoRaWAN server such as TTN, user can pass the data to Datacake and plot out, currently only support GPS plot.
388 +(((
389 +After TrackerD sends data to LoRaWAN server such as TTN, use can pass the data to Datacake and plot out, currently only support GPS plot.
390 +)))
544 544  
392 +(((
545 545  Instruction is here: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Tago.IO/#H3.A0Example-CreateTrackerD2FLGT92positioningwidget>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Tago.IO/#H3.A0Example-CreateTrackerD2FLGT92positioningwidget]]
394 +)))
546 546  
547 547  
548 548  [[image:1664502715371-321.png]]
... ... @@ -549,25 +549,9 @@
549 549  
550 550  
551 551  
552 -== 2.7  Datalog Feature ==
401 +== 2.6 Alarm Mode ==
553 553  
554 554  
555 -total 273 entries,by default,
556 -
557 -User can set [[PNACKMD=1>>||anchor="H3.2.10A0A0AutoSendNone-ACKmessages"]], to enable Datalog feature.
558 -
559 -Example use case.
560 -
561 -[[image:image-20221009234703-2.png||height="328" width="899"]]
562 -
563 -
564 -[[image:image-20221009234629-1.png||height="390" width="577"]]
565 -
566 -
567 -
568 -== 2.8 Alarm Mode ==
569 -
570 -
571 571  (((
572 572  User can push the (% style="color:red" %)**RED button**(%%) by more than 5 seconds to enter Alarm Mode.
573 573  )))
... ... @@ -574,7 +574,7 @@
574 574  
575 575  
576 576  (((
577 -Once enter Alarm mode, the (% style="color:green" %)**GREEN LED**(%%) will flash 3 times, the buzzer will alarm for 5 seconds, then TrackerD will immediately send a packet without location info and then send a data packet with GPS positioning information. After that, the device will send 60 packets at 1-minute intervals. The Alarm flag in the payload will be set for the next 60 packets unless exits alert mode.
410 +Once enter Alarm mode, the (% style="color:green" %)**GREEN LED**(%%) will flash 3 times, the buzzer will alarm for 5 seconds, then TrackerD will immediately send a packet without location info and then send a data packet with GPS positioning information. After that, the device will send 60 packets at 1-minute intervals. The Alarm flag in the payload will be set for the next 60 packets unless exit alert mode.
578 578  )))
579 579  
580 580  
... ... @@ -582,7 +582,7 @@
582 582  Two ways to exit alarm mode:
583 583  )))
584 584  
585 -* Server sends a downlink command to exit.
418 +* Server send a downlink command to exit.
586 586  * User fast press the RED button 10 times.
587 587  
588 588  (((
... ... @@ -591,23 +591,20 @@
591 591  
592 592  
593 593  
594 -== 2.9 Transport Mode ==
427 +== 2.7 Sports Mode ==
595 595  
596 596  
597 -In Transport Mode, TrackerD will check if there is motion. If there is no motion, device will send uplinks every 20 minutes. If there is motion, device will send uplink every 5 minutes.
598 598  
431 +== 2.8 LED Status ==
599 599  
600 600  
601 -== 2.10 LED Status ==
602 -
603 -
604 -(% border="1.5" style="background-color:#ffffcc; width:500px" %)
434 +(% border="1.5" style="background-color:#ffffcc; color:green; width:500px" %)
605 605  |=(% style="width: 150px;" %)**Event**|=(% style="width: 200px;" %)**Action**|=(% style="width: 150px;" %)**AT+LON to control on/off**
606 606  |(% style="width:157px" %)**Power On**|(% style="width:271px" %)(% style="color:blue" %)**BLUE, **(% style="color:red" %)**RED , **(% style="color:green" %)**Green** flash once|(% style="width:202px" %)N/A
607 607  |(% style="width:157px" %)**Join request**|(% style="width:271px" %)(% style="color:green" %)**Green** (%%)led fast blink once (200ms)|(% style="width:202px" %)Yes
608 608  |(% style="width:157px" %)**Join Success**|(% style="width:271px" %)(% style="color:green" %)**Green**(%%) led on 5 second|(% style="width:202px" %)N/A
609 609  |(% style="width:157px" %)**Fixing Location**|(% style="width:271px" %)(% style="color:blue" %)**BLUE **(%%)blinks 200ms per second|(% style="width:202px" %)Yes
610 -|(% style="width:157px" %)**Fixed and uplink**|(% style="width:271px" %)(% style="color:green" %)**GREEN **(%%)blinks twice (200ms per blink)|(% style="width:202px" %)Yes
440 +|(% style="width:157px" %)**Fixed and uplink**|(% style="width:271px" %)(% style="color:green" %)**GREEN ***(%%)***blinks twice (200ms per blink)**|(% style="width:202px" %)Yes
611 611  |(% style="width:157px" %)**Fail Fix and uplink**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)blinks twice (200ms per blink)|(% style="width:202px" %)Yes
612 612  |(% style="width:157px" %)**Enter Alarm mode**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)on for 3 seconds|(% style="width:202px" %)Yes
613 613  |(% style="width:157px" %)**Uplink under Alarm**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)on for 1 second|(% style="width:202px" %)Yes
... ... @@ -615,9 +615,10 @@
615 615  |(% style="width:157px" %)**Get Downlink**|(% style="width:271px" %)(% style="color:green" %)**GREEN**(%%) led on 1 second|(% style="width:202px" %)Yes
616 616  |(% style="width:157px" %)**Movement Detect**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)led on 500ms|(% style="width:202px" %)N/A
617 617  
618 -== 2.11 Button Function ==
619 619  
449 +== 2.9 Button Function ==
620 620  
451 +
621 621  (% style="color:blue" %)**RESET button:**
622 622  
623 623  [[image:1664502835802-546.png]]
... ... @@ -630,17 +630,16 @@
630 630  [[image:1664502854406-763.png]]
631 631  
632 632  
633 -(% border="1" style="background-color:#ffffcc; width:510px" %)
634 -|=(% style="width: 100px;" %)**Function**|=(% style="width: 205px;" %)**Action**|=(% style="width: 205px;" %)**Description**
635 -|(% style="width:135px" %)Send Alarm|(% style="width:220px" %)Keep Pressing (% style="color:red" %)**RED**(%%) button for more than 5 seconds|(% style="width:265px" %)Enter Alarm Mode.  See [[Alarm Mode>>||anchor="H2.8AlarmMode"]]
464 +(% border="1.5" style="background-color:#ffffcc; color:green; width:520px" %)
465 +|=(% style="width: 100px;" %)**Function**|=(% style="width: 210px;" %)**Action**|=(% style="width: 210px;" %)**Description**
466 +|(% style="width:135px" %)Send Alarm|(% style="width:220px" %)Keep Pressing (% style="color:red" %)**RED**(%%) button for more than 5 seconds|(% style="width:265px" %)Enter Alarm Mode.  See [[Alarm Mode>>||anchor="H2.6AlarmMode"]]
636 636  |(% style="width:135px" %)Exit Alarm Mode|(% style="width:220px" %)Fast press the (% style="color:red" %)**RED** (%%)button 10 times|(% style="width:265px" %)Exit Alarm Mode
637 637  |(% style="width:135px" %)Enter Deep Sleep Mode|(% style="width:220px" %)Press and hold the button for 10 seconds, then quickly press the device 3 times to enter deep sleep|(% style="width:265px" %)This is the mode ship out from factory. CPU will be complete in sleep mode and no LoRa activity, only use before deploy.
638 638  
639 639  
471 +== 2.10 USB Port Function ==
640 640  
641 -== 2.12 USB Port Function ==
642 642  
643 -
644 644  The USB interface of TrackerD has below functions:
645 645  
646 646  * Power on the device
... ... @@ -648,6 +648,7 @@
648 648  * [[Configure Device>>||anchor="H3.ConfigureTrackerDviaATcommandorLoRaWANdownlink"]]
649 649  * [[Upgrade Firmware>>||anchor="H5.UploadFirmware"]]
650 650  
481 +
651 651  = 3. Configure TrackerD via AT command or LoRaWAN downlink =
652 652  
653 653  
... ... @@ -672,9 +672,11 @@
672 672  [[image:1664503022490-662.png]]
673 673  
674 674  
506 +
675 675  [[image:1664503035713-500.png]]
676 676  
677 677  
510 +
678 678  [[image:1664503047675-651.png]]
679 679  
680 680  
... ... @@ -718,21 +718,21 @@
718 718  
719 719  
720 720  
721 -=== 3.2.3 Set Transport Mode Packet transmission interval ===
554 +=== 3.2.3 Set Sports Mode Packet transmission interval ===
722 722  
723 723  
724 -Set Transport Mode packet transmit interval
557 +Set sports packet transmit interval
725 725  
726 726  * (% style="color:blue" %)**AT Command:**
727 727  
728 728  (% style="color:#037691" %)**AT+MTDC=xx. **
729 729  
730 -Example:  AT+MTDC=300000  **~-~->    ** Set Transport Mode Packet Interval to 300 seconds. TrackerD will send every 300 seconds in Transport mode, Default Value: 300000
563 +Example:  AT+MTDC=300000  **~-~->    ** Set Sports Mode Packet Interval to 300 seconds. TrackerD will send every 300 seconds in Sports mode, Default Value: 300000
731 731  
732 732  
733 733  * (% style="color:blue" %)**Downlink Payload (prefix 0x03):**
734 734  
735 -(% style="color:#037691" %)**0x03 00 01 2C**  (%%) ~/~/  Same as AT+MTDC=3000000
568 +(% style="color:#037691" %)**0x03 00 01 2C**  (%%) ~/~/  Same as AT+ MTDC=3000000
736 736  
737 737  
738 738  
... ... @@ -767,21 +767,21 @@
767 767  
768 768  
769 769  
770 -=== 3.2.6 Disable/Enable Transport Mode ===
603 +=== 3.2.6 Disable/Enable movement detect (Debug Only) ===
771 771  
772 772  
773 -Users can use this feature to enable/disable Transport Mode.
606 +User can use this feature to check and set thread hole of movement detect
774 774  
775 775  * (% style="color:blue" %)**AT Command:**
776 776  
777 777  (% style="color:#037691" %)**AT+INTWK=xx.  (Disable (0), Enable (1), default:0)**
778 778  
779 -Example:  AT+INTWK=1  **~-~->   ** Enable Transport Mode.
612 +Example:  AT+ INTWK =1  **~-~->   ** Enable detect movement.
780 780  
781 781  
782 782  * (% style="color:blue" %)**Downlink Payload (prefix 0xAF):**
783 783  
784 -(% style="color:#037691" %)**0xAF 01 ** (%%) ~/~/  Same as AT+INTWK=1
617 +(% style="color:#037691" %)**0xAF 01 ** (%%) ~/~/  Same as AT+ INTWK =1
785 785  
786 786  
787 787  
... ... @@ -788,47 +788,35 @@
788 788  === 3.2.7 Set Positioning Mode ===
789 789  
790 790  
791 -SMOD define how TrackerD scan and uplink data:
624 +SMOD define the how TrackerD scan and uplink date.
792 792  
626 +GPS室外定位模式：  设备默认模式，设备入网后会发送device当前模式下的信息，随后立即定位发送数据包（默认是3分钟定位，超过将发送无效数据），如果出现意外情况下，快速按键3下，将会发出报警消息（默认每分钟发送一次）。GPS还有一种logdata模式，在断网的情况下将数据存储下来，等到有网的时候，一次将数据以每10秒上报。
793 793  
794 -* (% style="color:blue" %)**AT Command:**
628 +BLE室内定位模式：  设备入网后会发送device当前模式下的信息，随后立即定位发送数据包（默认是5秒，超过将发送无效数据），如果出现意外情况下，快速按键3下，将会发出报警消息（默认每3分钟发送一次）。
795 795  
796 -(% style="color:#037691" %)**AT+SMOD=aa,bb,cc**
630 +GPS和BLE混动模式：设备入网后会发送device当前模式下的信息，随后立即判断是否在室内，如果是就进行BLE定位，不是就GPS定位。如果出现意外情况下，快速按键3下，将会发出报警消息（默认每分钟发送一次）。
797 797  
798 -(% style="color:#037691" %)** aa:**
632 +运动模式：  设备入网后会发送device当前模式下的信息，随后发送GPS定位数据，设备判断是否在运动，没有运动传感器没有检测到动作，立即进入静止状态（默认20分钟），如果产生运动，将每5分钟发送一次数据，再第五分钟后检测设备有误运动，无将切换到静止状态，有立即发送数据。
799 799  
800 -* (% style="color:red" %)**1: GPS ONLY(Factory Settings):    **(%%)Only get and uplink GPS location info.
801 801  
802 -* (% style="color:red" %)**2: BLE or WiFi ONLY:                     **(%%)Only obtain iBeacon info via BLE and uplink  or obtain WiFi ssid info via WiFi and uplink. Design for Indoor tracking.
803 803  
804 -* (% style="color:red" %)**3: GPS/BLE Hybrid:                       **(%%)Combination for Indoor and Outdoor tracking.Devices will try to search BLE iBeacon first. If device can't find the iBeacon, it will use GPS for positioning.
636 +* (% style="color:blue" %)**AT Command:**
805 805  
806 -(% style="color:#037691" %)**bb:**
638 +(% style="color:#037691" %)**AT+SMOD=xx. **
807 807  
808 -* (% style="color:red" %)**0 :  **(%%)GPS+ BAT+ State+Tem&Hum
809 809  
810 -* (% style="color:red" %)**1 :**(%%)  GPS +BAT State
641 + **Example:**
811 811  
812 -(% style="color:#037691" %)**cc:   **
643 + AT+ SMOD =1,0  **~-~-> ** GPS+ BAT+ State+Tem&Hum
813 813  
814 -* (% style="color:red" %)**1 : **(%%) (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State  
815 -
816 -* (% style="color:red" %)**2 : **(%%) (WiFi)SSID+Rssi+BAT+State ((% style="color:#037691" %)V1.4.1 Version support this function later(%%))  
645 + AT+ SMOD =1,1    **~-~->**  GPS +BAT State
817 817  
818 -(% style="color:blue" %)**Example:**
647 + AT+ SMOD =2,3    **~-~->**  (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State。
819 819  
820 - AT+SMOD=1,0,0 ~-~->  GPS+ BAT+ State+Tem&Hum
821 821  
822 - AT+SMOD=1,1,0 ~-~->  GPS +BAT State
823 -
824 - AT+SMOD=2,0,1 ~-~->  (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State
825 -
826 - AT+SMOD=2,0,2 ~-~->  (WiFi)SSID+Rssi+BAT+State
827 -
828 -
829 829  * (% style="color:blue" %)**Downlink Payload (prefix 0xA5):**
830 830  
831 -(% style="color:#037691" %)**0xA5 01 00 00**    (%%) ~/~/  Same as AT+SMOD=1,0,0
652 +(% style="color:#037691" %)**0xA5 01 00**    (%%) ~/~/  Same as AT+ SMOD =1,0
832 832  
833 833  
834 834  
... ... @@ -845,7 +845,7 @@
845 845  
846 846  (% style="color:#037691" %)**AT+FTIME=xx**  (%%) **~-~-> ** Set to use xx as max fix time.
847 847  
848 -**Example:**  AT+FTIME=150
669 +Example:  AT+FTIME=150
849 849  
850 850  
851 851  * (% style="color:blue" %)**Downlink Payload (prefix 0xAA):**
... ... @@ -854,7 +854,7 @@
854 854  
855 855  
856 856  
857 -=== 3.2.9 Set PDOP value for GPS fix accuracy ===
678 +=== 3.3.9 Set PDOP value for GPS fix accuracy ===
858 858  
859 859  
860 860  PDOP(Position Dilution of Precision) filter, TrackerD will only accept GPS data with a lower PDOP value than pre-configure PDOP value. If device can't get a valid GPS packet within FTIME timeout, it will use the GPS data with lowest PDOP value to server.
... ... @@ -882,110 +882,22 @@
882 882  
883 883  * (% style="color:blue" %)**AT Command:**
884 884  
885 -(% style="color:#037691" %)**AT+CFM=xx**
706 +(% style="color:#037691" %)**AT+CFM=xx. **
886 886  
887 887  
888 888  **~ Example:**
889 889  
890 - AT+CFM=0    **~-~->   ** Disable confirmation
711 + AT+ CFM=0    **~-~->   ** Disable confirmation
891 891  
892 - AT+CFM=1    **~-~->  ** Enable confirmation
713 + AT+ CFM=1    **~-~->  ** Enable confirmation
893 893  
894 894  
895 895  * (% style="color:blue" %)**Downlink Payload (prefix 0x05):**
896 896  
897 -(% style="color:#037691" %)**0x05 01 **(%%) ~/~/  Same as AT+CFM=1
718 +(% style="color:#037691" %)**0x05 01 **(%%) ~/~/  Same as AT+ SMOD =1
898 898  
899 899  
900 900  
901 -=== 3.2.10  Auto Send None-ACK messages ===
902 -
903 -
904 -TrackerD will wait for ACK for each uplink, If TrackerD doesn't get ACK from the IoT server, it will consider the message doesn't arrive server and store it. TrackerD keeps sending messages in normal periodically. Once TrackerD gets ACK from a server, it will consider the network is ok and start to send the not-arrive message.
905 -
906 -
907 -* (% style="color:blue" %)**AT Command: AT+PNACKMD**
908 -
909 -The default factory setting is 0.
910 -
911 -
912 -**Command Example Function Response:**
913 -
914 -(% style="color:#037691" %)**AT+PNACKMD=1**  (%%) ~/~/  Poll None-ACK message OK
915 -
916 -
917 -* (% style="color:blue" %)**Downlink Command: 0x34**
918 -
919 -Example: 0x3401  ~/~/  Same as AT+PNACKMD=1
920 -
921 -
922 -
923 -=== 3.2.11  Set BLEMASK to filter BLE iBeacon ===
924 -
925 -
926 -BLEMASK is to filter the unwanted BLE iBeacons during scan. For example, if BLEMASK is 123456. TrackerD will only uplink UUID info which includes 123456. It will ignore all other iBeacons which doesn’t contact 123456 in the UUID.
927 -
928 -(% style="color:red" %)**Note: BLEMASK range is 6 ~~ 10 bytes. If AT+BLEMASK < 6 bytes, BLEMASK will be disabled.**
929 -
930 -(% style="color:blue" %)**AT Command:**
931 -
932 - (% style="color:#037691" %)**AT+BLEMASK=123456**   (%%) ~/~/ Set BLEMASK = 123456
933 -
934 - (% style="color:#037691" %)**AT+BLEMASK=0**  (%%) ~/~/ disable BLEMASK
935 -
936 -(% style="color:blue" %)**Downlink Payload: (Prefix : 0xB2)(Since firmware 1.4.1）**
937 -
938 -Example: 0xB2010203040506    ~/~/ Set BLEMASK to 123456
939 -
940 -
941 -
942 -=== 3.2.12  Set WiFIMASK to filter WiFi SSID（Since firmware 1.4.1） ===
943 -
944 -
945 -WiFiMASK is to filter the unwanted WiFi SSID during scan. For example, if WiFiMASK is 123456. TrackerD will only uplink SSID info which includes 123456 as prefix. It will ignore all other WiFi which doesn’t contact 123456 in the SSID.
946 -
947 -(% style="color:red" %)**Note: WiFiMASK range is 6 ~~ 10 bytes. If AT+ WiFiMASK < 6 bytes, WiFiMASK will be disabled.**
948 -
949 -(% style="color:blue" %)**AT Command:**
950 -
951 - (% style="color:#037691" %)**AT+WiFiMASK=123456**    (%%) ~/~/ Set WiFiMASK = 123456
952 -
953 - (% style="color:#037691" %)**AT+WiFiMASK=0**       (%%) ~/~/ disable WiFiMASK
954 -
955 -(% style="color:blue" %)**Downlink Payload: (Prefix : 0xB3)(Since firmware 1.4.1）**
956 -
957 -Example: 0xB3010203040506    ~/~/ Set WiFiMASK to 123456
958 -
959 -
960 -
961 -=== 3.2.13 Disable/Enable Information printing（Since firmware 1.4.1） ===
962 -
963 -
964 -Users can use this feature to enable/disable Information printing.
965 -
966 -(% style="color:blue" %)**AT Command:**
967 -
968 -(% style="color:#037691" %)**AT+SHOWID=XX         **(%%) ~/~/(Disable (0), Enable (1), default:0)
969 -\\Example: AT+SHOWID=1 ~-~-> Enable Information printing.
970 -
971 -
972 -
973 -=== 3.2.14 Get or Set Eight Channels Mode, only for us915, AU915（Since firmware 1.4.1） ===
974 -
975 -
976 -The Channels Mode in the LORAWAN LMIC library is from 0 ~~ 7. When CHE = 8, 72 channels will be accessible to the network.
977 -
978 -(% style="color:blue" %)**AT Command:**
979 -
980 -(% style="color:#037691" %)**AT+CHE=1**(%%) ~/~/ set one channels mode
981 -
982 -
983 -(% style="color:blue" %)**Downlink Payload:0X24**
984 -
985 -Example: 0x24 01 ~/~/ Same as AT+CHE=1
986 -
987 -
988 -
989 989  = 4. Setting for Different Scenarios =
990 990  
991 991  
... ... @@ -1026,10 +1026,9 @@
1026 1026  [[image:1664503574618-659.png]]
1027 1027  
1028 1028  
1029 -
1030 1030  (% style="color:blue" %)**Step5:** (%%) Select the firmware file (.bin format), com port and proper SPI configure. Clink Start. Bin file location:
1031 1031  
1032 -[[https:~~/~~/github.com/dragino/TrackerD/releases>>https://github.com/dragino/TrackerD/releases]]
764 +[[https:~~/~~/www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0>>url:https://www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0]]
1033 1033  
1034 1034  
1035 1035  Users need to use below files:
... ... @@ -1066,24 +1066,12 @@
1066 1066  [[image:1664503635019-941.png]]
1067 1067  
1068 1068  
1069 -
1070 1070  * (% style="color:#037691" %)**Go to tools ~-~-> Boards ~-~-> Boards Manager**,(%%) **find the esp32 information and install it.**
1071 1071  
1072 1072  [[image:1664503715811-892.png]]
1073 1073  
1074 1074  
1075 -(% id="cke_bm_4554S" style="display:none" %) (%%)Find the path of SP32 installation, find the file as shown in Figure 1, and change the SPI pin to the shown in Figure 2.
1076 1076  
1077 -[[image:image-20221024105643-1.png]]
1078 -
1079 -**~ Figure1**
1080 -
1081 -
1082 -[[image:image-20221024105643-2.png]]
1083 -
1084 - **Figure2**
1085 -
1086 -
1087 1087  * **Download the latest TrackerD from the dragino github: [[https:~~/~~/github.com/dragino/TrackerD>>url:https://github.com/dragino/TrackerD]]**
1088 1088  
1089 1089  Put the Library in the TrackerD directory into the libraries file in the Arduino directory:
... ... @@ -1142,90 +1142,11 @@
1142 1142  |(% style="width:118px" %)A8|(% style="width:67px" %)Yellow|(% style="width:123px" %)MTMS/GPIO14
1143 1143  |(% style="width:118px" %)B8|(% style="width:67px" %)Grey|(% style="width:123px" %)MTDO/GPIO15
1144 1144  
1145 -== 7.3 Notes on using different serial port tools for TrackerD ==
1146 1146  
1147 1147  
1148 -=== 7.3.1  Serial port utility ===
867 += 8.  Order Info =
1149 1149  
1150 1150  
1151 -Serial port utility requires you to automatically add data streams.
1152 -
1153 -Need to adjust the data stream to RTS/CTS on physical restart.
1154 -
1155 -
1156 -(% class="wikigeneratedid" %)
1157 -[[image:image-20221102140621-1.png]]
1158 -
1159 -
1160 -When using AT commands, the data flow needs to be adjusted to XON/XOFF
1161 -
1162 -
1163 -[[image:image-20221102140638-2.png]]
1164 -
1165 -
1166 -
1167 -=== 7.3.2  SecureCRT ===
1168 -
1169 -
1170 -The default command window of SecureCRT is not displayed. Entering a command requires a complete input of the entire command. You can open the command window in the view.
1171 -
1172 -
1173 -[[image:image-20221102140704-3.png]]
1174 -
1175 -
1176 -[[image:image-20221102140712-4.png]]
1177 -
1178 -
1179 -
1180 -=== 7.3.3  PUTTY ===
1181 -
1182 -
1183 -[[image:image-20221102140748-5.png]]
1184 -
1185 -
1186 -Since putty does not have a command window, you need to fill in the complete command externally, and then copy it to putty.The information copied outside can be pasted by right-clicking the mouse in putty.
1187 -
1188 -
1189 -[[image:image-20221102140801-6.png]]
1190 -
1191 -
1192 -
1193 -= 8  Trouble Shooting =
1194 -
1195 -
1196 -== 8.1  TDC is changed to 4294947296 and cause no uplink. ==
1197 -
1198 -
1199 -(((
1200 -Before firmware v1.4.0: When the Transport Mode is enabled (**AT+INTWK=1**), the **TDC** needs to be greater than **MTDC**, otherwise, TDC setting will because 4294947296 after wakre up from motion. This bug is fixed in firmware v1.4.1
1201 -)))
1202 -
1203 -
1204 -
1205 -== 8.2  Device not able get AT Command or show output after wake up from deep sleep mode ==
1206 -
1207 -
1208 -(((
1209 -ESP32 is not able to accept the Interrupt from UART after wake up from deep sleep mode. User need to press the button (one click) and trackerD will be able to accept UART command, it there is no action in UART for 15 seconds. it will go to deep sleep mode.
1210 -)))
1211 -
1212 -
1213 -
1214 -== 8.3  The reason why it has been restarted after upgrading（V.1.4.1） ==
1215 -
1216 -
1217 -(((
1218 -If it is V1.4.0 and the previous version, new partitions need to be loaded when upgrading. The new version of the software is stored in the partition package. The upgrade method is shown in the figure
1219 -)))
1220 -
1221 -
1222 -[[image:image-20221107145243-1.png||height="695" width="443"]]
1223 -
1224 -
1225 -
1226 -= 9.  Order Info =
1227 -
1228 -
1229 1229  Part Number: (% style="color:blue" %)**TrackerD-XXX**
1230 1230  
1231 1231  (% style="color:blue" %)**XXX**(%%): The default frequency band
... ... @@ -1238,9 +1238,10 @@
1238 1238  * (% style="color:red" %)**AU915**(%%): Default frequency band AU915
1239 1239  * (% style="color:red" %)**US915**(%%): Default frequency band US915
1240 1240  
1241 -= 10.  Packing Info =
1242 1242  
883 += 9.  Packing Info =
1243 1243  
885 +
1244 1244  (% style="color:#037691" %)**Package Includes**:
1245 1245  
1246 1246  * TrackerD LoRaWAN GPS/BLE Tracker x 1
... ... @@ -1248,18 +1248,20 @@
1248 1248  
1249 1249  (% style="color:#037691" %)**Dimensions and Weight**:
1250 1250  
1251 -* Device Size: 85 x 48 x 15 mm
893 +* Device Size: 85 x 48 x 15 cm
1252 1252  * Weight: 50g
1253 1253  
1254 -= 11. Support =
1255 1255  
897 += 10. Support =
1256 1256  
899 +
1257 1257  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1258 1258  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]].
1259 1259  
1260 -= 12.  Reference =
1261 1261  
904 += 11.  Reference =
1262 1262  
906 +
1263 1263  * [[**Firmware in Bin format**>>https://www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0]]
1264 1264  * **[[Source Code>>https://github.com/dragino/TrackerD]] **
1265 1265  * [[**Hardware Source**>>https://www.dropbox.com/sh/orwoy6cecb89m4e/AAD37sRuUrvKsHgAJxuVTkB5a?dl=0]]
1665301570342-765.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.6 KB
Content
1665301636888-168.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -36.6 KB
Content
1665301687277-443.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -22.6 KB
Content
1665301786397-168.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -22.6 KB
Content
1667288597595-714.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -27.9 KB
Content
image-20221006181357-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -88.0 KB
Content
image-20221009160220-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -46.4 KB
Content
image-20221009160309-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -57.2 KB
Content
image-20221009234629-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -222.9 KB
Content
image-20221009234703-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -136.4 KB
Content
image-20221024105643-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -11.3 KB
Content
image-20221024105643-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -64.5 KB
Content
image-20221102140621-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -46.1 KB
Content
image-20221102140638-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -40.8 KB
Content
image-20221102140704-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -15.5 KB
Content
image-20221102140712-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -73.2 KB
Content
image-20221102140748-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -56.0 KB
Content
image-20221102140801-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Kilight
Size
... ... @@ -1,1 +1,0 @@
1 -21.0 KB
Content
image-20221107145243-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -107.3 KB
Content