Skip to Content
Last modified by Xiaoling on 2023/12/27 09:15
From version 76.1
edited by Edwin Chen
on 2022/10/13 23:11
Change comment: There is no comment for this version
To version 72.1
edited by Edwin Chen
on 2022/10/09 23:47
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -203,11 +203,9 @@
203 203  === 2.4.1 Uplink FPORT~=5, Device Status ===
204 204  
205 205  
206 -Uplink the device configures with FPORT=5. Once TrackerD Joined the network, it will uplink this message to the server. After the first uplink, TrackerD will uplink Device Status every 12 hours.
206 +Uplink the device configures with FPORT=5. Once LGT92 Joined the network, it will uplink this message to the server. After first uplink, LHT52 will uplink Device Status every 12 hours.
207 207  
208 -Use can also get the Device Status uplink through the downlink command: **Downlink:  0x2301**
209 209  
210 -
211 211  (% border="1.5" style="background-color:#ffffcc; color:green; width:520px" %)
212 212  |=(% scope="row" style="width: 108px;" %)**Size(bytes)**|=(% style="width: 82px;" %)**1**|=(% style="width: 83px;" %)**2**|=(% style="width: 94px;" %)**1**|=(% style="width: 84px;" %)**1**|=(% style="width: 44px;" %)2|=(% style="width: 63px;" %)**2**|=(% style="width: 60px;" %)1
213 213  |=(% style="width: 108px;" %)**Value**|(% style="width:82px" %)Sensor Model|(% style="width:83px" %)Firmware Version|(% style="width:94px" %)Frequency Band|(% style="width:84px" %)Sub-band|(% style="width:44px" %)BAT|(% style="width:63px" %)SMOD|(% style="width:60px" %)Status
... ... @@ -215,13 +215,13 @@
215 215  [[image:1665301570342-765.png]]
216 216  
217 217  
218 -(% style="color:#037691" %)**Example of Device Status:**(%%) 13014001FF0FA24002
216 +Example Payload (FPort=5):  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT52%20-%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220621105116-11.png?rev=1.1||alt="image-20220621105116-11.png"]]
219 219  
220 -(% style="color:#037691" %)**Sensor Model:** (%%) For TrackerD,this value is 0x13
218 +**Sensor Model**: For TrackerD, this value is 0x13.
221 221  
222 -(% style="color:#037691" %)**Firmware Version: **(%%) 0x0140,Means:v1.4.0 version
220 +**Firmware Version**: 0x0100, Means: v1.0.0 version.
223 223  
224 -(% style="color:#037691" %)**Frequency Band**:
222 +**Frequency Band**:
225 225  
226 226  *0x01: EU868
227 227  
... ... @@ -243,54 +243,16 @@
243 243  
244 244  *0x0a: AS923-3
245 245  
246 -Sub- Band:value 0x00~~0x08(only forAU915,US915,Others are 0xFF)
244 +**Sub-Band**: value 0x00 ~~ 0x08(only for CN470, AU915,US915. Others are0x00)
247 247  
248 -(% style="color:#037691" %)**BAT:**(%%) shows the battery voltage for TrackerD.
246 +**BAT**: shows the battery voltage for TrackerD.
249 249  
248 +Ex1: 0x0B3A = 2874mV
250 250  
251 -(% style="color:#037691" %)**Ex1:**(%%) 0x0FA2 = 4002mV
252 -
253 253  Use can also get the Device Status uplink through the downlink command:
254 254  
255 255  
256 256  
257 -(% style="color:#037691" %)**SMOD Field (total 1 byte)**(%%)：0x40
258 -
259 -(% border="1.5" style="background-color:#ffffcc; color:green; width:420px" %)
260 -|(% style="width:75px" %)**Size(bit)**|(% style="width:64px" %)2bits|(% style="width:137px" %)2bit|(% style="width:142px" %)4bit
261 -|(% style="width:75px" %)**Value**|(% style="width:64px" %)SMOD|(% style="width:137px" %)GPS_Settings|(% style="width:142px" %)BLE_Settings
262 -
263 -(% style="color:blue" %)** SMOD：**
264 -
265 -(% style="color:red" %)** 1 :** (%%) GPS ONLY
266 -
267 -(% style="color:red" %)** 2 :** (%%) BLE ONLY
268 -
269 -(% style="color:red" %)** 3 :**  (%%) GPS/BLE Hybrid
270 -
271 -
272 -(% style="color:blue" %)** GPS_MOD: Define how to send GPS payload**
273 -
274 -(% style="color:red" %)** 0 : ** (%%) Enable uploading on-board Temperature and humidity values
275 -
276 -(% style="color:red" %)** 1 :** (%%) Disable uploading on-board Temperature and humidity values
277 -
278 -
279 -(% style="color:blue" %)** BLE_Settings:**
280 -
281 -(% style="color:red" %)** 1: ** (%%) BLE Positioning with Strongest iBeacon
282 -
283 -
284 -
285 -(% style="color:#037691" %)**Status Field (total 1 byte)**(%%):  0x02
286 -
287 -(% border="1.5" style="background-color:#ffffcc; color:green; width:450px" %)
288 -|(% style="width:77px" %)**Size(bit)**|(% style="width:82px" %)5 Bits|(% style="width:106px" %)1 Bit|(% style="width:67px" %)1 Bit|(% style="width:121px" %)1 Bit
289 -|(% style="width:77px" %)**Value**|(% style="width:82px" %)Reserve|(% style="width:106px" %)PNACKMD|(% style="width:67px" %)LON|(% style="width:121px" %)Transport** **Mode
290 -
291 -
292 -
293 -
294 294  === 2.4.2 Uplink FPORT~=2, Realtime GNSS Positioning + Temperature & Humidity ===
295 295  
296 296  
... ... @@ -318,6 +318,10 @@
318 318  |=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)1 bit|(% style="width:80px" %)1bit|(% style="width:50px" %)14bits
319 319  |=(% style="width: 72px;" %)**Value**|(% style="width:67px" %)reserve|(% style="width:118px" %)Alarm Indicate|(% style="width:63px" %)[[BAT>>||anchor="HBAT:"]] 
320 320  
281 +==== ====
282 +
283 +==== ====
284 +
321 321  ==== (% style="color:blue" %)**FLAG:**(%%) ====
322 322  
323 323  (% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:250px" %)
... ... @@ -350,12 +350,13 @@
350 350  
351 351  ==== (% style="color:blue" %)**Alarm:**(%%) ====
352 352  
353 -**Example: ** 0x4B & 0x40 >> 6 = 0x01
317 +Example:  0x4B & 0x40 >> 6 = 0x01
354 354  
355 355  
320 +
356 356  ==== (% style="color:blue" %)**BAT:**(%%) ====
357 357  
358 -**Example: ** 0x4B45 & 0x3FFF ⇒ 2885 (mV).
323 +Example:  0x0CDD & 0x3FFF ⇒ 3293 (mV).
359 359  
360 360  (((
361 361  The battery info shows the battery voltage, User can use the below mapping to indicate the battery in percentage: \
... ... @@ -367,37 +367,19 @@
367 367  * 3.40v ~~ 3.69v:  20% ~~ 40%
368 368  * < 3.39v:  0~~20%
369 369  
370 -==== (% style="color:blue" %)**MOD:**(%%) ====
371 -
372 -**Example: ** (0x60>>6)& 0x3f =1.
373 -
374 -**Set the format of GPS data uplink link：**
375 -
376 -(% style="color:#037691" %)**0x00:** (%%) Enable uploading on-board Temperature and humidity values
377 -(% style="color:#037691" %)**0x01: ** (%%) Disable uploading on-board Temperature and humidity values
378 -
379 -
380 -**Set the format of BLE data uplink link：**
381 -
382 -(% style="color:#037691" %)**0x01: ** (%%) BLE Positioning with Strongest iBeacon
383 -
384 -
385 385  ==== (% style="color:blue" %)**LON:**(%%) ====
386 386  
387 -**Example:** (0x60>>5) & 0x01=1.
388 -
389 389  Enable/Disable LED activity for uplink
390 390  
391 391  (((
392 -(% style="color:#037691" %)**0x00:**  (%%) Disable LED indicator.
340 +0x00:  Disable LED indicator.
393 393  )))
394 394  
395 395  (((
396 -(% style="color:#037691" %)**0x01:**  (%%) Enable LED indicator (Default Value)
344 +0x01:  Enable LED indicator (Default Value)
397 397  )))
398 398  
399 399  
400 -
401 401  ==== (% style="color:blue" %)**Hum:**(%%) ====
402 402  
403 403  0202 = //if (0x0202 & 0x8000 = 0 ):  value =// 0x0202 / 100 = +514 ⇒ 51.4 degree
... ... @@ -780,33 +780,37 @@
780 780  
781 781  * (% style="color:blue" %)**AT Command:**
782 782  
783 -(% style="color:#037691" %)**AT+SMOD=aa,bb,cc**
730 +(% style="color:#037691" %)**AT+SMOD=aa,bb**
784 784  
785 785  (% style="color:#037691" %)** aa:**
786 786  
787 -* (% style="color:red" %)**1: GPS ONLY(Factory Settings):    **(%%)only get and uplink GPS location info.
788 -* (% style="color:red" %)**2: BLE ONLY:              **(%%)Only obtain iBeacon info via BLE and uplink. Design for Indoor tracking.
789 -* (% style="color:red" %)**3: GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.Devices will try to search BLE iBeacon first. If device can't find the iBeacon, it will use GPS for positioning.
734 +* (% style="color:#037691" %)**1: GPS ONLY(Factory Settings):    **(%%)only get and uplink GPS location info.
735 +* (% style="color:#037691" %)**2: BLE ONLY:              **(%%)Only obtain iBeacon info via BLE and uplink. Design for Indoor tracking.
736 +* (% style="color:#037691" %)**3: GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.Devices will try to search BLE iBeacon first. If device can't find the iBeacon, it will use GPS for positioning
790 790  
791 791  (% style="color:#037691" %)**bb:**
792 792  
793 -* (% style="color:red" %)**0 :  **(%%)GPS+ BAT+ State+Tem&Hum
794 -* (% style="color:red" %)**1 :**(%%)  GPS +BAT State
740 +(% style="color:#037691" %)** if aa = 1: **
795 795  
796 -(% style="color:#037691" %)**cc:   **
742 +* (% style="color:#037691" %)**0 :  **(%%)GPS+ BAT+ State+Tem&Hum
743 +* (% style="color:#037691" %)**1 :**(%%)  GPS +BAT State
797 797  
798 -* (% style="color:red" %)**1 : **(%%) (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State  
745 +(% style="color:#037691" %)** if aa = 2: **
799 799  
800 -(% style="color:blue" %)**Example:**
747 +* (% style="color:#037691" %)**3 :  **(%%)(iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State
801 801  
802 - AT+ SMOD =1,0 ,0 ~-~->  GPS+ BAT+ State+Tem&Hum
803 - AT+ SMOD =1,1,0 ~-~->  GPS +BAT State
804 - AT+ SMOD =2,0,1 ~-~->  (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State
749 + **Example:**
805 805  
751 + AT+ SMOD =1,0  **~-~-> ** GPS+ BAT+ State+Tem&Hum
806 806  
753 + AT+ SMOD =1,1    **~-~->**  GPS +BAT State
754 +
755 + AT+ SMOD =2,3    **~-~->**  (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State
756 +
757 +
807 807  * (% style="color:blue" %)**Downlink Payload (prefix 0xA5):**
808 808  
809 -(% style="color:#037691" %)**0xA5 01 00 00**    (%%) ~/~/  Same as AT+ SMOD =1,0,0
760 +(% style="color:#037691" %)**0xA5 01 00**    (%%) ~/~/  Same as AT+ SMOD =1,0
810 810  
811 811  
812 812  
... ... @@ -823,7 +823,7 @@
823 823  
824 824  (% style="color:#037691" %)**AT+FTIME=xx**  (%%) **~-~-> ** Set to use xx as max fix time.
825 825  
826 -**Example:**  AT+FTIME=150
777 +Example:  AT+FTIME=150
827 827  
828 828  
829 829  * (% style="color:blue" %)**Downlink Payload (prefix 0xAA):**
... ... @@ -860,7 +860,7 @@
860 860  
861 861  * (% style="color:blue" %)**AT Command:**
862 862  
863 -(% style="color:#037691" %)**AT+CFM=xx**
814 +(% style="color:#037691" %)**AT+CFM=xx. **
864 864  
865 865  
866 866  **~ Example:**
... ... @@ -876,27 +876,6 @@
876 876  
877 877  
878 878  
879 -=== 3.2.10  Auto Send None-ACK messages ===
880 -
881 -
882 -TrackerD will wait for ACK for each uplink, If TrackerD doesn't get ACK from the IoT server, it will consider the message doesn't arrive server and store it. TrackerD keeps sending messages in normal periodically. Once TrackerD gets ACK from a server, it will consider the network is ok and start to send the not-arrive message.
883 -
884 -
885 -* (% style="color:blue" %)**AT Command: AT+PNACKMD**
886 -
887 -The default factory setting is 0.
888 -
889 -
890 -**Command Example Function Response:**
891 -
892 -(% style="color:#037691" %)**AT+PNACKMD=1**  (%%) ~/~/  Poll None-ACK message OK
893 -
894 -
895 -* (% style="color:blue" %)**Downlink Command: 0x34**
896 -
897 -Example: 0x3401  ~/~/  Same as AT+PNACKMD=1
898 -
899 -
900 900  = 4. Setting for Different Scenarios =
901 901  
902 902  
... ... @@ -939,7 +939,7 @@
939 939  
940 940  (% style="color:blue" %)**Step5:** (%%) Select the firmware file (.bin format), com port and proper SPI configure. Clink Start. Bin file location:
941 941  
942 -[[https:~~/~~/github.com/dragino/TrackerD/releases>>https://github.com/dragino/TrackerD/releases]]
872 +[[https:~~/~~/www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0>>url:https://www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0]]
943 943  
944 944  
945 945  Users need to use below files:
... ... @@ -1071,7 +1071,6 @@
1071 1071  * Device Size: 85 x 48 x 15 cm
1072 1072  * Weight: 50g
1073 1073  
1074 -
1075 1075  = 10. Support =
1076 1076  
1077 1077  
... ... @@ -1078,7 +1078,6 @@
1078 1078  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1079 1079  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]].
1080 1080  
1081 -
1082 1082  = 11.  Reference =
1083 1083  
1084 1084