Skip to Content
Last modified by Xiaoling on 2023/12/27 09:15
From version 72.1
edited by Edwin Chen
on 2022/10/09 23:47
Change comment: There is no comment for this version
To version 78.1
edited by Edwin Chen
on 2022/10/13 23:23
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -203,9 +203,11 @@
203 203  === 2.4.1 Uplink FPORT~=5, Device Status ===
204 204  
205 205  
206 -Uplink the device configures with FPORT=5. Once LGT92 Joined the network, it will uplink this message to the server. After first uplink, LHT52 will uplink Device Status every 12 hours.
206 +Uplink the device configures with FPORT=5. Once TrackerD Joined the network, it will uplink this message to the server. After the first uplink, TrackerD will uplink Device Status every 12 hours.
207 207  
208 +Use can also get the Device Status uplink through the downlink command: **Downlink:  0x2301**
208 208  
210 +
209 209  (% border="1.5" style="background-color:#ffffcc; color:green; width:520px" %)
210 210  |=(% scope="row" style="width: 108px;" %)**Size(bytes)**|=(% style="width: 82px;" %)**1**|=(% style="width: 83px;" %)**2**|=(% style="width: 94px;" %)**1**|=(% style="width: 84px;" %)**1**|=(% style="width: 44px;" %)2|=(% style="width: 63px;" %)**2**|=(% style="width: 60px;" %)1
211 211  |=(% style="width: 108px;" %)**Value**|(% style="width:82px" %)Sensor Model|(% style="width:83px" %)Firmware Version|(% style="width:94px" %)Frequency Band|(% style="width:84px" %)Sub-band|(% style="width:44px" %)BAT|(% style="width:63px" %)SMOD|(% style="width:60px" %)Status
... ... @@ -213,13 +213,13 @@
213 213  [[image:1665301570342-765.png]]
214 214  
215 215  
216 -Example Payload (FPort=5):  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT52%20-%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220621105116-11.png?rev=1.1||alt="image-20220621105116-11.png"]]
218 +(% style="color:#037691" %)**Example of Device Status:**(%%) 13014001FF0FA24002
217 217  
218 -**Sensor Model**: For TrackerD, this value is 0x13.
220 +(% style="color:#037691" %)**Sensor Model:** (%%) For TrackerD,this value is 0x13
219 219  
220 -**Firmware Version**: 0x0100, Means: v1.0.0 version.
222 +(% style="color:#037691" %)**Firmware Version: **(%%) 0x0140,Means:v1.4.0 version
221 221  
222 -**Frequency Band**:
224 +(% style="color:#037691" %)**Frequency Band**:
223 223  
224 224  *0x01: EU868
225 225  
... ... @@ -241,20 +241,56 @@
241 241  
242 242  *0x0a: AS923-3
243 243  
244 -**Sub-Band**: value 0x00 ~~ 0x08(only for CN470, AU915,US915. Others are0x00)
246 +Sub- Band:value 0x00~~0x08(only forAU915,US915,Others are 0xFF)
245 245  
246 -**BAT**: shows the battery voltage for TrackerD.
248 +(% style="color:#037691" %)**BAT:**(%%) shows the battery voltage for TrackerD.
247 247  
248 -Ex1: 0x0B3A = 2874mV
249 249  
251 +(% style="color:#037691" %)**Ex1:**(%%) 0x0FA2 = 4002mV
252 +
250 250  Use can also get the Device Status uplink through the downlink command:
251 251  
252 252  
253 253  
257 +(% style="color:#037691" %)**SMOD Field (total 1 byte)**(%%)：0x40
258 +
259 +(% border="1.5" style="background-color:#ffffcc; color:green; width:420px" %)
260 +|(% style="width:75px" %)**Size(bit)**|(% style="width:64px" %)2bits|(% style="width:137px" %)2bit|(% style="width:142px" %)4bit
261 +|(% style="width:75px" %)**Value**|(% style="width:64px" %)SMOD|(% style="width:137px" %)GPS_Settings|(% style="width:142px" %)BLE_Settings
262 +
263 +(% style="color:blue" %)** SMOD：**
264 +
265 +(% style="color:red" %)** 1 :** (%%) GPS ONLY
266 +
267 +(% style="color:red" %)** 2 :** (%%) BLE ONLY
268 +
269 +(% style="color:red" %)** 3 :**  (%%) GPS/BLE Hybrid
270 +
271 +
272 +(% style="color:blue" %)** GPS_MOD: Define how to send GPS payload**
273 +
274 +(% style="color:red" %)** 0 : ** (%%) Enable uploading on-board Temperature and humidity values
275 +
276 +(% style="color:red" %)** 1 :** (%%) Disable uploading on-board Temperature and humidity values
277 +
278 +
279 +(% style="color:blue" %)** BLE_Settings:**
280 +
281 +(% style="color:red" %)** 1: ** (%%) BLE Positioning with Strongest iBeacon
282 +
283 +
284 +
285 +(% style="color:#037691" %)**Status Field (total 1 byte)**(%%):  0x02
286 +
287 +(% border="1.5" style="background-color:#ffffcc; color:green; width:450px" %)
288 +|(% style="width:77px" %)**Size(bit)**|(% style="width:82px" %)5 Bits|(% style="width:106px" %)1 Bit|(% style="width:67px" %)1 Bit|(% style="width:121px" %)1 Bit
289 +|(% style="width:77px" %)**Value**|(% style="width:82px" %)Reserve|(% style="width:106px" %)PNACKMD|(% style="width:67px" %)LON|(% style="width:121px" %)Transport** **Mode
290 +
291 +
254 254  === 2.4.2 Uplink FPORT~=2, Realtime GNSS Positioning + Temperature & Humidity ===
255 255  
256 256  
257 -User can use **AT+SMOD=1,0** to enable uploading on-board Temperature and humidity values, and the total payload will be 15 bytes, please note that 15 bytes won't work on DR0 on US915/AU915 frequency band.
295 +Users can use **AT+SMOD=1,0,0** to enable uploading on-board Temperature and humidity values, and the total payload will be 15 bytes,
258 258  
259 259  
260 260  (% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:480px" %)
... ... @@ -278,10 +278,6 @@
278 278  |=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)1 bit|(% style="width:80px" %)1bit|(% style="width:50px" %)14bits
279 279  |=(% style="width: 72px;" %)**Value**|(% style="width:67px" %)reserve|(% style="width:118px" %)Alarm Indicate|(% style="width:63px" %)[[BAT>>||anchor="HBAT:"]] 
280 280  
281 -==== ====
282 -
283 -==== ====
284 -
285 285  ==== (% style="color:blue" %)**FLAG:**(%%) ====
286 286  
287 287  (% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:250px" %)
... ... @@ -314,13 +314,12 @@
314 314  
315 315  ==== (% style="color:blue" %)**Alarm:**(%%) ====
316 316  
317 -Example:  0x4B & 0x40 >> 6 = 0x01
351 +**Example: ** 0x4B & 0x40 >> 6 = 0x01
318 318  
319 319  
320 -
321 321  ==== (% style="color:blue" %)**BAT:**(%%) ====
322 322  
323 -Example:  0x0CDD & 0x3FFF ⇒ 3293 (mV).
356 +**Example: ** 0x4B45 & 0x3FFF ⇒ 2885 (mV).
324 324  
325 325  (((
326 326  The battery info shows the battery voltage, User can use the below mapping to indicate the battery in percentage: \
... ... @@ -332,19 +332,37 @@
332 332  * 3.40v ~~ 3.69v:  20% ~~ 40%
333 333  * < 3.39v:  0~~20%
334 334  
368 +==== (% style="color:blue" %)**MOD:**(%%) ====
369 +
370 +**Example: ** (0x60>>6)& 0x3f =1.
371 +
372 +**Set the format of GPS data uplink link：**
373 +
374 +(% style="color:#037691" %)**0x00:** (%%) Enable uploading on-board Temperature and humidity values
375 +(% style="color:#037691" %)**0x01: ** (%%) Disable uploading on-board Temperature and humidity values
376 +
377 +
378 +**Set the format of BLE data uplink link：**
379 +
380 +(% style="color:#037691" %)**0x01: ** (%%) BLE Positioning with Strongest iBeacon
381 +
382 +
335 335  ==== (% style="color:blue" %)**LON:**(%%) ====
336 336  
385 +**Example:** (0x60>>5) & 0x01=1.
386 +
337 337  Enable/Disable LED activity for uplink
338 338  
339 339  (((
340 -0x00:  Disable LED indicator.
390 +(% style="color:#037691" %)**0x00:**  (%%) Disable LED indicator.
341 341  )))
342 342  
343 343  (((
344 -0x01:  Enable LED indicator (Default Value)
394 +(% style="color:#037691" %)**0x01:**  (%%) Enable LED indicator (Default Value)
345 345  )))
346 346  
347 347  
398 +
348 348  ==== (% style="color:blue" %)**Hum:**(%%) ====
349 349  
350 350  0202 = //if (0x0202 & 0x8000 = 0 ):  value =// 0x0202 / 100 = +514 ⇒ 51.4 degree
... ... @@ -359,7 +359,7 @@
359 359  === 2.4.3  Uplink FPORT~=3, Realtime GNSS Positioning (Default Mode) ===
360 360  
361 361  
362 -The default uplink payload includes totally 11 bytes. The payload is the first 11 bytes of Uplink FPORT=2, real-time GNSS positioning, (remove the temp and humidity)
413 +The default uplink payload includes total 11 bytes (**AT+SMOD=1,1,0**). The payload is the first 11 bytes of Uplink FPORT=2, real-time GNSS positioning, (remove the temp and humidity)
363 363  
364 364  
365 365  (% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:480px" %)
... ... @@ -385,6 +385,7 @@
385 385  
386 386  * a) TrackerD will do an ACK check for data records sending to make sure every data arrive server.
387 387  * b) TrackerD will send data in (% style="color:blue" %)**CONFIRMED Mode**(%%) when PNACKMD=1, but TrackerD won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink, if TrackerD gets an ACK, TrackerD will consider there is a network connection and resend all NONE-ACK Messages.
439 +* c) the total payload will be 15 bytes, while US915/AU915 DR0 accepts only 11 bytes of payload. In this case (DR0 of US915/AU915), the payload on server will show NULL
388 388  
389 389  The payload is 15 bytes, as below.
390 390  
... ... @@ -428,7 +428,6 @@
428 428  * (% style="color:#037691" %)**Measured Power: ** (%%) The Measured Power from the strongest iBeacon.
429 429  * (% style="color:#037691" %)**RSSI:  ** (%%) The RSSI from the strongest iBeacon.
430 430  
431 -
432 432  === 2.4.6  Add Payload format in TTN V3 ===
433 433  
434 434  
... ... @@ -484,8 +484,9 @@
484 484  == 2.7  Datalog Feature ==
485 485  
486 486  
487 -total 273 entries,by default disable
538 +total 273 entries,by default,
488 488  
540 +User can set [[PNACKMD=1>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H4.13AutoSendNone-ACKmessages]], to enable Datalog feature.
489 489  
490 490  Example use case.
491 491  
... ... @@ -546,7 +546,6 @@
546 546  |(% style="width:157px" %)**Get Downlink**|(% style="width:271px" %)(% style="color:green" %)**GREEN**(%%) led on 1 second|(% style="width:202px" %)Yes
547 547  |(% style="width:157px" %)**Movement Detect**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)led on 500ms|(% style="width:202px" %)N/A
548 548  
549 -
550 550  == 2.11 Button Function ==
551 551  
552 552  
... ... @@ -568,7 +568,6 @@
568 568  |(% style="width:135px" %)Exit Alarm Mode|(% style="width:220px" %)Fast press the (% style="color:red" %)**RED** (%%)button 10 times|(% style="width:265px" %)Exit Alarm Mode
569 569  |(% style="width:135px" %)Enter Deep Sleep Mode|(% style="width:220px" %)Press and hold the button for 10 seconds, then quickly press the device 3 times to enter deep sleep|(% style="width:265px" %)This is the mode ship out from factory. CPU will be complete in sleep mode and no LoRa activity, only use before deploy.
570 570  
571 -
572 572  == 2.12 USB Port Function ==
573 573  
574 574  
... ... @@ -579,7 +579,6 @@
579 579  * [[Configure Device>>||anchor="H3.ConfigureTrackerDviaATcommandorLoRaWANdownlink"]]
580 580  * [[Upgrade Firmware>>||anchor="H5.UploadFirmware"]]
581 581  
582 -
583 583  = 3. Configure TrackerD via AT command or LoRaWAN downlink =
584 584  
585 585  
... ... @@ -727,37 +727,33 @@
727 727  
728 728  * (% style="color:blue" %)**AT Command:**
729 729  
730 -(% style="color:#037691" %)**AT+SMOD=aa,bb**
779 +(% style="color:#037691" %)**AT+SMOD=aa,bb,cc**
731 731  
732 732  (% style="color:#037691" %)** aa:**
733 733  
734 -* (% style="color:#037691" %)**1: GPS ONLY(Factory Settings):    **(%%)only get and uplink GPS location info.
735 -* (% style="color:#037691" %)**2: BLE ONLY:              **(%%)Only obtain iBeacon info via BLE and uplink. Design for Indoor tracking.
736 -* (% style="color:#037691" %)**3: GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.Devices will try to search BLE iBeacon first. If device can't find the iBeacon, it will use GPS for positioning
783 +* (% style="color:red" %)**1: GPS ONLY(Factory Settings):    **(%%)only get and uplink GPS location info.
784 +* (% style="color:red" %)**2: BLE ONLY:              **(%%)Only obtain iBeacon info via BLE and uplink. Design for Indoor tracking.
785 +* (% style="color:red" %)**3: GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.Devices will try to search BLE iBeacon first. If device can't find the iBeacon, it will use GPS for positioning.
737 737  
738 738  (% style="color:#037691" %)**bb:**
739 739  
740 -(% style="color:#037691" %)** if aa = 1: **
789 +* (% style="color:red" %)**0 :  **(%%)GPS+ BAT+ State+Tem&Hum
790 +* (% style="color:red" %)**1 :**(%%)  GPS +BAT State
741 741  
742 -* (% style="color:#037691" %)**0 :  **(%%)GPS+ BAT+ State+Tem&Hum
743 -* (% style="color:#037691" %)**1 :**(%%)  GPS +BAT State
792 +(% style="color:#037691" %)**cc:   **
744 744  
745 -(% style="color:#037691" %)** if aa = 2: **
794 +* (% style="color:red" %)**1 : **(%%) (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State  
746 746  
747 -* (% style="color:#037691" %)**3 :  **(%%)(iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State
796 +(% style="color:blue" %)**Example:**
748 748  
749 - **Example:**
798 + AT+ SMOD =1,0 ,0 ~-~->  GPS+ BAT+ State+Tem&Hum
799 + AT+ SMOD =1,1,0 ~-~->  GPS +BAT State
800 + AT+ SMOD =2,0,1 ~-~->  (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State
750 750  
751 - AT+ SMOD =1,0  **~-~-> ** GPS+ BAT+ State+Tem&Hum
752 752  
753 - AT+ SMOD =1,1    **~-~->**  GPS +BAT State
754 -
755 - AT+ SMOD =2,3    **~-~->**  (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State
756 -
757 -
758 758  * (% style="color:blue" %)**Downlink Payload (prefix 0xA5):**
759 759  
760 -(% style="color:#037691" %)**0xA5 01 00**    (%%) ~/~/  Same as AT+ SMOD =1,0
805 +(% style="color:#037691" %)**0xA5 01 00 00**    (%%) ~/~/  Same as AT+ SMOD =1,0,0
761 761  
762 762  
763 763  
... ... @@ -774,7 +774,7 @@
774 774  
775 775  (% style="color:#037691" %)**AT+FTIME=xx**  (%%) **~-~-> ** Set to use xx as max fix time.
776 776  
777 -Example:  AT+FTIME=150
822 +**Example:**  AT+FTIME=150
778 778  
779 779  
780 780  * (% style="color:blue" %)**Downlink Payload (prefix 0xAA):**
... ... @@ -811,7 +811,7 @@
811 811  
812 812  * (% style="color:blue" %)**AT Command:**
813 813  
814 -(% style="color:#037691" %)**AT+CFM=xx. **
859 +(% style="color:#037691" %)**AT+CFM=xx**
815 815  
816 816  
817 817  **~ Example:**
... ... @@ -827,6 +827,27 @@
827 827  
828 828  
829 829  
875 +=== 3.2.10  Auto Send None-ACK messages ===
876 +
877 +
878 +TrackerD will wait for ACK for each uplink, If TrackerD doesn't get ACK from the IoT server, it will consider the message doesn't arrive server and store it. TrackerD keeps sending messages in normal periodically. Once TrackerD gets ACK from a server, it will consider the network is ok and start to send the not-arrive message.
879 +
880 +
881 +* (% style="color:blue" %)**AT Command: AT+PNACKMD**
882 +
883 +The default factory setting is 0.
884 +
885 +
886 +**Command Example Function Response:**
887 +
888 +(% style="color:#037691" %)**AT+PNACKMD=1**  (%%) ~/~/  Poll None-ACK message OK
889 +
890 +
891 +* (% style="color:blue" %)**Downlink Command: 0x34**
892 +
893 +Example: 0x3401  ~/~/  Same as AT+PNACKMD=1
894 +
895 +
830 830  = 4. Setting for Different Scenarios =
831 831  
832 832  
... ... @@ -869,7 +869,7 @@
869 869  
870 870  (% style="color:blue" %)**Step5:** (%%) Select the firmware file (.bin format), com port and proper SPI configure. Clink Start. Bin file location:
871 871  
872 -[[https:~~/~~/www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0>>url:https://www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0]]
938 +[[https:~~/~~/github.com/dragino/TrackerD/releases>>https://github.com/dragino/TrackerD/releases]]
873 873  
874 874  
875 875  Users need to use below files:
... ... @@ -971,7 +971,6 @@
971 971  |(% style="width:118px" %)A8|(% style="width:67px" %)Yellow|(% style="width:123px" %)MTMS/GPIO14
972 972  |(% style="width:118px" %)B8|(% style="width:67px" %)Grey|(% style="width:123px" %)MTDO/GPIO15
973 973  
974 -
975 975  = 8.  Order Info =
976 976  
977 977  
... ... @@ -987,7 +987,6 @@
987 987  * (% style="color:red" %)**AU915**(%%): Default frequency band AU915
988 988  * (% style="color:red" %)**US915**(%%): Default frequency band US915
989 989  
990 -
991 991  = 9.  Packing Info =
992 992  
993 993