Changes for page TrackerD - LoRaWAN Tracker User Manual(Remove WiFi)

Last modified by Xiaoling on 2023/12/27 09:15

From 68.2 to 68.3 From 84.5 to 84.6

From version 68.3

edited by Xiaoling
on 2022/10/09 16:04

Change comment: There is no comment for this version

To version 84.5

edited by Xiaoling
on 2022/10/24 11:16

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (1 modified, 0 added, 0 removed)
Attachments (0 modified, 4 added, 0 removed)

Details

Page properties

Content

@@ -189,6 +189,7 @@
  (% style="color:blue" %)**Step 3:**(%%) TrackerD will auto join to the LoRaWAN network. After join success, TrackerD will start to upload message to IoT server.
++
  == 2.3  Positioning Mode(SMOD) ==
@@ -208,9 +208,11 @@
  === 2.4.1  Uplink FPORT~=5, Device Status ===
--Uplink the device configures with FPORT=5. Once LGT92 Joined the network, it will uplink this message to the server. After first uplink, LHT52 will uplink Device Status every 12 hours.
++Uplink the device configures with FPORT=5. Once TrackerD Joined the network, it will uplink this message to the server. After the first uplink, TrackerD will uplink Device Status every 12 hours.
++Use can also get the Device Status uplink through the downlink command: **Downlink:  0x2301**
++
  (% border="1.5" style="background-color:#ffffcc; color:green; width:520px" %)
  |=(% scope="row" style="width: 108px;" %)**Size(bytes)**|=(% style="width: 82px;" %)**1**|=(% style="width: 83px;" %)**2**|=(% style="width: 94px;" %)**1**|=(% style="width: 84px;" %)**1**|=(% style="width: 44px;" %)2|=(% style="width: 63px;" %)**2**|=(% style="width: 60px;" %)1
  |=(% style="width: 108px;" %)**Value**|(% style="width:82px" %)Sensor Model|(% style="width:83px" %)Firmware Version|(% style="width:94px" %)Frequency Band|(% style="width:84px" %)Sub-band|(% style="width:44px" %)BAT|(% style="width:63px" %)SMOD|(% style="width:60px" %)Status
@@ -218,13 +218,13 @@
  [[image:1665301570342-765.png]]
--Example Payload (FPort=5):  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT52%20-%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220621105116-11.png?rev=1.1||alt="image-20220621105116-11.png"]]
++(% style="color:#037691" %)**Example of Device Status:**(%%) 13014001FF0FA24002
--**Sensor Model**: For TrackerD, this value is 0x13.
++(% style="color:#037691" %)**Sensor Model:** (%%) For TrackerD,this value is 0x13
--**Firmware Version**: 0x0100, Means: v1.0.0 version.
++(% style="color:#037691" %)**Firmware Version: **(%%) 0x0140,Means:v1.4.0 version
--**Frequency Band**:
++(% style="color:#037691" %)**Frequency Band**:
  *0x01: EU868
@@ -246,20 +246,55 @@
  *0x0a: AS923-3
--**Sub-Band**: value 0x00 ~~ 0x08(only for CN470, AU915,US915. Others are0x00)
++Sub- Band:value 0x00~~0x08(only forAU915,US915,Others are 0xFF)
--**BAT**: shows the battery voltage for TrackerD.
++(% style="color:#037691" %)**BAT:**(%%) shows the battery voltage for TrackerD.
--Ex1: 0x0B3A = 2874mV
++(% style="color:#037691" %)**Ex1:**(%%) 0x0FA2 = 4002mV
++
  Use can also get the Device Status uplink through the downlink command:
++(% style="color:#037691" %)**SMOD Field (total 1 byte)**(%%)：0x40
++(% border="1.5" style="background-color:#ffffcc; color:green; width:420px" %)
++|(% style="width:75px" %)**Size(bit)**|(% style="width:64px" %)2bits|(% style="width:137px" %)2bit|(% style="width:142px" %)4bit
++|(% style="width:75px" %)**Value**|(% style="width:64px" %)SMOD|(% style="width:137px" %)GPS_Settings|(% style="width:142px" %)BLE_Settings
++
++(% style="color:blue" %)**     SMOD：**
++
++(% style="color:red" %)**      1 :** (%%)  GPS ONLY
++
++(% style="color:red" %)**      2 :** (%%)  BLE ONLY
++
++(% style="color:red" %)**      3 :**  (%%) GPS/BLE Hybrid
++
++
++(% style="color:blue" %)**      GPS_MOD: Define how to send GPS payload**
++
++(% style="color:red" %)**      0 : ** (%%)  Enable uploading on-board Temperature and humidity values
++
++(% style="color:red" %)**      1 :** (%%)   Disable uploading on-board Temperature and humidity values
++
++
++(% style="color:blue" %)**      BLE_Settings:**
++
++(% style="color:red" %)**      1: ** (%%)  BLE Positioning with Strongest iBeacon
++
++
++(% style="color:#037691" %)**Status Field (total 1 byte)**(%%):  0x02
++
++(% border="1.5" style="background-color:#ffffcc; color:green; width:417px" %)
++|(% style="width:77px" %)**Size(bit)**|(% style="width:70px" %)5 Bits|(% style="width:92px" %)1 Bit|(% style="width:48px" %)1 Bit|(% style="width:126px" %)1 Bit
++|(% style="width:77px" %)**Value**|(% style="width:70px" %)Reserve|(% style="width:92px" %)[[PNACKMD>>||anchor="H2.4.4A0UplinkFPORT3D42CHistoryGNSSPositioning"]]|(% style="width:48px" %)[[LON>>||anchor="H3.2.5Disable2FEnableLEDflash"]]|(% style="width:126px" %)[[Transport Mode>>||anchor="H2.9TransportMode"]]
++
++
++
  === 2.4.2  Uplink FPORT~=2, Realtime GNSS Positioning + Temperature & Humidity ===
--User can use **AT+SMOD=1,0** to enable uploading on-board Temperature and humidity values, and the total payload will be 15 bytes, please note that 15 bytes won't work on DR0 on US915/AU915 frequency band.
++Users can use **AT+SMOD=1,0,0** to enable uploading on-board Temperature and humidity values, and the total payload will be 15 bytes,
  (% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:480px" %)
@@ -315,12 +315,12 @@
  ==== (% style="color:blue" %)**Alarm:**(%%) ====
--Example:  0x4B & 0x40 >> 6 = 0x01
++**Example: ** 0x4B & 0x40 >> 6 = 0x01
  ==== (% style="color:blue" %)**BAT:**(%%) ====
--Example:  0x0CDD & 0x3FFF ⇒ 3293 (mV).
++**Example: ** 0x4B45 & 0x3FFF ⇒ 2885 (mV).
  (((
  The battery info shows the battery voltage, User can use the below mapping to indicate the battery in percentage: \
@@ -332,19 +332,39 @@
  * 3.40v ~~ 3.69v:   20% ~~ 40%
  * < 3.39v:             0~~20%
++
++
++==== (% style="color:blue" %)**MOD:**(%%) ====
++
++**Example: ** (0x60>>6) & 0x3f =1
++
++**Set the format of GPS data uplink link：**
++
++(% style="color:#037691" %)**0x00:** (%%)  Enable uploading on-board Temperature and humidity values
++(% style="color:#037691" %)**0x01: ** (%%) Disable uploading on-board Temperature and humidity values
++
++
++**Set the format of BLE data uplink link：**
++
++(% style="color:#037691" %)**0x01: ** (%%)  BLE Positioning with Strongest iBeacon
++
++
  ==== (% style="color:blue" %)**LON:**(%%) ====
++**Example:** (0x60>>5) & 0x01=1.
++
  Enable/Disable LED activity for uplink
  (((
--0x00:   Disable LED indicator.
++(% style="color:#037691" %)**0x00:**  (%%) Disable LED indicator.
  )))
  (((
--0x01:   Enable LED indicator (Default Value)
++(% style="color:#037691" %)**0x01:**  (%%) Enable LED indicator (Default Value)
  )))
++
  ==== (% style="color:blue" %)**Hum:**(%%) ====
 = //if (0x0202 & 0x8000 = 0 ):  value =// 0x0202 / 100 = +514 ⇒ 51.4 degree
@@ -359,7 +359,7 @@
  === 2.4.3  Uplink FPORT~=3, Realtime GNSS Positioning (Default Mode) ===
--The default uplink payload includes totally 11 bytes. The payload is the first 11 bytes of Uplink FPORT=2, real-time GNSS positioning, (remove the temp and humidity)
++The default uplink payload includes total 11 bytes (**AT+SMOD=1,1,0**). The payload is the first 11 bytes of Uplink FPORT=2, real-time GNSS positioning, (remove the temp and humidity)
  (% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:480px" %)
@@ -378,7 +378,7 @@
  === 2.4.4  Uplink FPORT~=4, History GNSS Positioning ===
--Set [[PNACKMD=1>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H4.13AutoSendNone-ACKmessages]], and TrackerD will wait for ACK for every uplink, when there is no LoRaWAN network, TrackerD will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
++Set [[PNACKMD=1>>||anchor="H3.2.10A0A0AutoSendNone-ACKmessages"]], and TrackerD will wait for ACK for every uplink, when there is no LoRaWAN network, TrackerD will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
  (% style="color:red" %)**Note for this mode:**
@@ -385,6 +385,7 @@
  * a) TrackerD will do an ACK check for data records sending to make sure every data arrive server.
  * b) TrackerD will send data in (% style="color:blue" %)**CONFIRMED Mode**(%%) when PNACKMD=1, but TrackerD won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink, if TrackerD gets an ACK, TrackerD will consider there is a network connection and resend all NONE-ACK Messages.
++* c) the total payload will be 15 bytes, while US915/AU915 DR0 accepts only 11 bytes of payload. In this case (DR0 of US915/AU915), the payload on server will show NULL
  The payload is 15 bytes, as below.
@@ -401,6 +401,11 @@
  === 2.4.5  Uplink FPORT~=6, BLE Positioning with Strongest iBeacon ===
++TrackerD supports BLE scans for indoor positioning. User can set [[**SMOD**>>||anchor="H3.2.7SetPositioningMode"]] to **BLE pure** or **GPS/BLE hybrid** so TrackerD will scan BLE iBeacon and find the strongest iBeacon info and uplink.
++
++User can set **[[BLEMASK>>||anchor="H3.2.11A0SetBLEMASKtofilterBLEiBeacon"]]** so TrackerD will only search the iBeacons which have UUID that match the BLEMASK settings.
++
++
  (% border="1.5" cellspacing="3" style="background-color:#ffffcc; color:green; width:450px" %)
  |=(% scope="row" style="width: 60px;" %)(((
  **Size(bytes)**
@@ -420,7 +420,7 @@
  [[image:1664502425687-834.png]]
--* (% style="color:#037691" %)**BAT: **  (%%)    Ex1: 0x4B45 & 0x3FFF ⇒ 3901 (mV).
++* (% style="color:#037691" %)**BAT: **  (%%)     Ex1:0x4B45 & 0x3FFF ⇒ 3901 (mV).
  * (% style="color:#037691" %)**MODE:   **(%%)Define the payload format.
  * (% style="color:#037691" %)**UUID:     **(%%)The uuid from the strongest iBeacon.
  * (% style="color:#037691" %)**MAJOR:** (%%) The MAJOR from the strongest iBeacon.
@@ -428,6 +428,8 @@
  * (% style="color:#037691" %)**Measured Power: ** (%%)   The Measured Power from the strongest iBeacon.
  * (% style="color:#037691" %)**RSSI:  **    (%%) The RSSI from the strongest iBeacon.
++
++
  === 2.4.6  Add Payload format in TTN V3 ===
@@ -439,8 +439,9 @@
  [[image:1664502649601-895.png]]
--Add the decoder from this link:
++Add the decoder from this link:
++[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/TrackerD>>https://github.com/dragino/dragino-end-node-decoder/tree/main/TrackerD]]
  Save the change the uplink message will be parsed. As below:
@@ -451,15 +451,10 @@
  == 2.5  Integrate with Datacake ==
--(((
  After TrackerD sends data to LoRaWAN server such as TTN, use can pass the data to Datacake and plot out, currently only support GPS plot.
--)))
--(((
  Instruction is here:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20Data%20Cake/#H7.Example~~-~~-AddTrackerDGPSTrackingInDataCake>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20Data%20Cake/#H7.Example--AddTrackerDGPSTrackingInDataCake]]
--)))
--
  [[image:1664502695771-538.png]]
@@ -467,23 +467,32 @@
  == 2.6  Integrate with Tago ==
--(((
--After TrackerD sends data to LoRaWAN server such as TTN, use can pass the data to Datacake and plot out, currently only support GPS plot.
--)))
++After TrackerD sends data to LoRaWAN server such as TTN, user can pass the data to Datacake and plot out, currently only support GPS plot.
--(((
  Instruction is here: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Tago.IO/#H3.A0Example-CreateTrackerD2FLGT92positioningwidget>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Tago.IO/#H3.A0Example-CreateTrackerD2FLGT92positioningwidget]]
--)))
++
  [[image:1664502715371-321.png]]
--== 2.7 Datalog Feature ==
++== 2.7  Datalog Feature ==
--total 273 entries,by default disable
++total 273 entries,by default,
++
++User can set [[PNACKMD=1>>||anchor="H3.2.10A0A0AutoSendNone-ACKmessages"]], to enable Datalog feature.
++
++Example use case.
++
++[[image:image-20221009234703-2.png||height="328" width="899"]]
++
++
++[[image:image-20221009234629-1.png||height="390" width="577"]]
++
++
++
  == 2.8  Alarm Mode ==
@@ -493,7 +493,7 @@
  (((
--Once enter Alarm mode, the (% style="color:green" %)**GREEN LED**(%%) will flash 3 times, the buzzer will alarm for 5 seconds, then TrackerD will immediately send a packet without location info and then send a data packet with GPS positioning information. After that, the device will send 60 packets at 1-minute intervals. The Alarm flag in the payload will be set for the next 60 packets unless exit alert mode.
++Once enter Alarm mode, the (% style="color:green" %)**GREEN LED**(%%) will flash 3 times, the buzzer will alarm for 5 seconds, then TrackerD will immediately send a packet without location info and then send a data packet with GPS positioning information. After that, the device will send 60 packets at 1-minute intervals. The Alarm flag in the payload will be set for the next 60 packets unless exits alert mode.
  )))
@@ -501,7 +501,7 @@
  Two ways to exit alarm mode:
  )))
--* Server send a downlink command to exit.
++* Server sends a downlink command to exit.
  * User fast press the RED button 10 times.
  (((
@@ -516,6 +516,7 @@
  In Transport Mode, TrackerD will check if there is motion. If there is no motion, device will send uplinks every 20 minutes. If there is motion, device will send uplink every 5 minutes.
++
  == 2.10  LED Status ==
@@ -533,6 +533,8 @@
  |(% style="width:157px" %)**Get Downlink**|(% style="width:271px" %)(% style="color:green" %)**GREEN**(%%) led on 1 second|(% style="width:202px" %)Yes
  |(% style="width:157px" %)**Movement Detect**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)led on 500ms|(% style="width:202px" %)N/A
++
++
  == 2.11  Button Function ==
@@ -554,6 +554,8 @@
  |(% style="width:135px" %)Exit Alarm Mode|(% style="width:220px" %)Fast press the (% style="color:red" %)**RED** (%%)button 10 times|(% style="width:265px" %)Exit Alarm Mode
  |(% style="width:135px" %)Enter Deep Sleep Mode|(% style="width:220px" %)Press and hold the button for 10 seconds, then quickly press the device 3 times to enter deep sleep|(% style="width:265px" %)This is the mode ship out from factory. CPU will be complete in sleep mode and no LoRa activity, only use before deploy.
++
++
  == 2.12  USB Port Function ==
@@ -564,6 +564,8 @@
  * [[Configure Device>>||anchor="H3.ConfigureTrackerDviaATcommandorLoRaWANdownlink"]]
  * [[Upgrade Firmware>>||anchor="H5.UploadFirmware"]]
++
++
  = 3.  Configure TrackerD via AT command or LoRaWAN downlink =
@@ -588,11 +588,9 @@
  [[image:1664503022490-662.png]]
--
  [[image:1664503035713-500.png]]
--
  [[image:1664503047675-651.png]]
@@ -706,42 +706,38 @@
  === 3.2.7  Set Positioning Mode ===
--SMOD define the how TrackerD scan and uplink data:
++SMOD define how TrackerD scan and uplink data:
  * (% style="color:blue" %)**AT Command:**
--(% style="color:#037691" %)**AT+SMOD=aa,bb**
++(% style="color:#037691" %)**AT+SMOD=aa,bb,cc**
  (% style="color:#037691" %)** aa:**
--* (% style="color:#037691" %)**1: GPS ONLY(Factory Settings):    **(%%)only get and uplink GPS location info.
--* (% style="color:#037691" %)**2: BLE ONLY:              **(%%)Only obtain iBeacon info via BLE and uplink. Design for Indoor tracking.
--* (% style="color:#037691" %)**3: GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.Devices will try to search BLE iBeacon first. If device can't find the iBeacon, it will use GPS for positioning
++* (% style="color:red" %)**1: GPS ONLY(Factory Settings):    **(%%)only get and uplink GPS location info.
++* (% style="color:red" %)**2: BLE ONLY:              **(%%)Only obtain iBeacon info via BLE and uplink. Design for Indoor tracking.
++* (% style="color:red" %)**3: GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.Devices will try to search BLE iBeacon first. If device can't find the iBeacon, it will use GPS for positioning.
  (% style="color:#037691" %)**bb:**
--(% style="color:#037691" %)**       if aa = 1: **
++* (% style="color:red" %)**0 :  **(%%)GPS+ BAT+ State+Tem&Hum
++* (% style="color:red" %)**1 :**(%%)  GPS +BAT State
--* (% style="color:#037691" %)**0 :  **(%%)GPS+ BAT+ State+Tem&Hum
--* (% style="color:#037691" %)**1 :**(%%)  GPS +BAT State
++(% style="color:#037691" %)**cc:   **
--(% style="color:#037691" %)**       if aa = 2: **
++* (% style="color:red" %)**1 : **(%%) (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State
--* (% style="color:#037691" %)**3 :  **(%%)(iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State
++(% style="color:blue" %)**Example:**
-- **Example:**
++  AT+ SMOD =1,0,0    ~-~->    GPS+ BAT+ State+Tem&Hum
++  AT+ SMOD =1,1,0    ~-~->    GPS +BAT State
++  AT+ SMOD =2,0,1    ~-~->    (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State
--  AT+ SMOD =1,0    **~-~-> ** GPS+ BAT+ State+Tem&Hum
--  AT+ SMOD =1,1    **~-~->**  GPS +BAT State
--
--  AT+ SMOD =2,3    **~-~->**  (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State
--
--
  * (% style="color:blue" %)**Downlink Payload (prefix 0xA5):**
--(% style="color:#037691" %)**0xA5 01 00**    (%%)   ~/~/  Same as AT+ SMOD =1,0
++(% style="color:#037691" %)**0xA5 01 00 00**    (%%)   ~/~/  Same as AT+ SMOD =1,0,0
@@ -758,7 +758,7 @@
  (% style="color:#037691" %)**AT+FTIME=xx**  (%%) **~-~-> ** Set to use xx as max fix time.
--Example:  AT+FTIME=150
++**Example:**  AT+FTIME=150
  * (% style="color:blue" %)**Downlink Payload (prefix 0xAA):**
@@ -767,7 +767,7 @@
--=== 3.3.9  Set PDOP value for GPS fix accuracy ===
++=== 3.2.9  Set PDOP value for GPS fix accuracy ===
  PDOP(Position Dilution of Precision) filter, TrackerD will only accept GPS data with a lower PDOP value than pre-configure PDOP value. If device can't get a valid GPS packet within FTIME timeout, it will use the GPS data with lowest PDOP value to server.
@@ -795,7 +795,7 @@
  * (% style="color:blue" %)**AT Command:**
--(% style="color:#037691" %)**AT+CFM=xx. **
++(% style="color:#037691" %)**AT+CFM=xx**
  **~ Example:**
@@ -811,6 +811,48 @@
++=== 3.2.10  Auto Send None-ACK messages ===
++
++
++TrackerD will wait for ACK for each uplink, If TrackerD doesn't get ACK from the IoT server, it will consider the message doesn't arrive server and store it. TrackerD keeps sending messages in normal periodically. Once TrackerD gets ACK from a server, it will consider the network is ok and start to send the not-arrive message.
++
++
++* (% style="color:blue" %)**AT Command: AT+PNACKMD**
++
++The default factory setting is 0.
++
++
++**Command Example Function Response:**
++
++(% style="color:#037691" %)**AT+PNACKMD=1**  (%%)  ~/~/  Poll None-ACK message OK
++
++
++* (% style="color:blue" %)**Downlink Command: 0x34**
++
++Example: 0x3401     ~/~/  Same as AT+PNACKMD=1
++
++
++
++=== 3.2.11  Set BLEMASK to filter BLE iBeacon ===
++
++
++BLEMASK is to filter the unwanted BLE iBeacons during scan. For example, if BLEMASK is 123456. LBT1 will only uplink UUID info which includes 123456. It will ignore all other iBeacons which doesn’t contact 123456 in the UUID.
++
++(% style="color:red" %)**Note: BLEMASK range is 6 ~~ 10 bytes. If AT+BLEMASK < 6 bytes, BLEMASK will be disabled.**
++
++(% style="color:blue" %)**AT Command:**
++
++     (% style="color:#037691" %)**AT+BLEMASK=123456**   (%%)  ~/~/ Set BLEMASK = 123456
++
++     (% style="color:#037691" %)**AT+BLEMASK=0**  (%%)             ~/~/ disable BLEMASK
++
++
++(% style="color:blue" %)**Downlink Payload: (Prefix : 0xA5)**
++
++Example:  0xA5010203040506    ~/~/ Set BLEMASK to 123456
++
++
++
  = 4.  Setting for Different Scenarios =
@@ -851,9 +851,10 @@
  [[image:1664503574618-659.png]]
++
  (% style="color:blue" %)**Step5:** (%%) Select the firmware file (.bin format), com port and proper SPI configure. Clink Start. Bin file location:
--[[https:~~/~~/www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0>>url:https://www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0]]
++[[https:~~/~~/github.com/dragino/TrackerD/releases>>https://github.com/dragino/TrackerD/releases]]
  Users need to use below files:
@@ -890,12 +890,24 @@
  [[image:1664503635019-941.png]]
++
  * (% style="color:#037691" %)**Go to tools ~-~-> Boards ~-~-> Boards Manager**,(%%) **find the esp32 information and install it.**
  [[image:1664503715811-892.png]]
++(% id="cke_bm_4554S" style="display:none" %) (%%)Find the path of SP32 installation, find the file as shown in Figure 1, and change the SPI pin to the shown in Figure 2.
++[[image:image-20221024105643-1.png]]
++
++**~                                                                                Figure1**
++
++
++[[image:image-20221024105643-2.png]]
++
++                                                                                   **Figure2**
++
++
  * **Download the latest TrackerD from the dragino github: [[https:~~/~~/github.com/dragino/TrackerD>>url:https://github.com/dragino/TrackerD]]**
  Put the Library in the TrackerD directory into the libraries file in the Arduino directory:
@@ -954,6 +954,8 @@
  |(% style="width:118px" %)A8|(% style="width:67px" %)Yellow|(% style="width:123px" %)MTMS/GPIO14
  |(% style="width:118px" %)B8|(% style="width:67px" %)Grey|(% style="width:123px" %)MTDO/GPIO15
++
++
  = 8.  Order Info =
@@ -969,6 +969,8 @@
  * (% style="color:red" %)**AU915**(%%): Default frequency band AU915
  * (% style="color:red" %)**US915**(%%): Default frequency band US915
++
++
  = 9.  Packing Info =
@@ -982,6 +982,8 @@
  * Device Size: 85 x 48 x 15 cm
  * Weight: 50g
++
++
  = 10.  Support =
@@ -988,6 +988,8 @@
  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]].
++
++
  = 11.  Reference =

image-20221009234629-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Edwin

Size

...	...	@@ -1,0 +1,1 @@
	1	+222.9 KB

Content

image-20221009234703-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Edwin

Size

...	...	@@ -1,0 +1,1 @@
	1	+136.4 KB

Content

image-20221024105643-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+11.3 KB

Content

image-20221024105643-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+64.5 KB

Content

Changes for page TrackerD - LoRaWAN Tracker User Manual(Remove WiFi)

Summary

Details

Applications

Navigation