Skip to Content
Last modified by Xiaoling on 2023/12/27 09:15
From version 68.3
edited by Xiaoling
on 2022/10/09 16:04
Change comment: There is no comment for this version
To version 74.7
edited by Xiaoling
on 2022/10/11 16:29
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -189,6 +189,7 @@
189 189  (% style="color:blue" %)**Step 3:**(%%) TrackerD will auto join to the LoRaWAN network. After join success, TrackerD will start to upload message to IoT server.
190 190  
191 191  
192 +
192 192  == 2.3  Positioning Mode(SMOD) ==
193 193  
194 194  
... ... @@ -208,7 +208,7 @@
208 208  === 2.4.1 Uplink FPORT~=5, Device Status ===
209 209  
210 210  
211 -Uplink the device configures with FPORT=5. Once LGT92 Joined the network, it will uplink this message to the server. After first uplink, LHT52 will uplink Device Status every 12 hours.
212 +Uplink the device configures with FPORT=5. Once TrackerD Joined the network, it will uplink this message to the server. After the first uplink, TrackerD will uplink Device Status every 12 hours.
212 212  
213 213  
214 214  (% border="1.5" style="background-color:#ffffcc; color:green; width:520px" %)
... ... @@ -218,13 +218,13 @@
218 218  [[image:1665301570342-765.png]]
219 219  
220 220  
221 -Example Payload (FPort=5):  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT52%20-%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220621105116-11.png?rev=1.1||alt="image-20220621105116-11.png"]]
222 +(% style="color:#037691" %)**Example of Device Status:**(%%) 13014001FF0FA24002
222 222  
223 -**Sensor Model**: For TrackerD, this value is 0x13.
224 +(% style="color:#037691" %)**Sensor Model:** (%%) For TrackerD,this value is 0x13
224 224  
225 -**Firmware Version**: 0x0100, Means: v1.0.0 version.
226 +(% style="color:#037691" %)**Firmware Version: **(%%) 0x0140,Means:v1.4.0 version
226 226  
227 -**Frequency Band**:
228 +(% style="color:#037691" %)**Frequency Band**:
228 228  
229 229  *0x01: EU868
230 230  
... ... @@ -246,16 +246,55 @@
246 246  
247 247  *0x0a: AS923-3
248 248  
249 -**Sub-Band**: value 0x00 ~~ 0x08(only for CN470, AU915,US915. Others are0x00)
250 +Sub- Band:value 0x00~~0x08(only forAU915,US915,Others are 0xFF)
250 250  
251 -**BAT**: shows the battery voltage for TrackerD.
252 +(% style="color:#037691" %)**BAT:**(%%) shows the battery voltage for TrackerD.
252 252  
253 -Ex1: 0x0B3A = 2874mV
254 254  
255 +(% style="color:#037691" %)**Ex1:**(%%) 0x0FA2 = 4002mV
256 +
255 255  Use can also get the Device Status uplink through the downlink command:
256 256  
259 +TrackerD Model：0x40
257 257  
261 +(% border="1.5" style="background-color:#ffffcc; color:green; width:314px" %)
262 +|(% style="width:75px" %)**Size(bit)**|(% style="width:64px" %)2bits|(% style="width:88px" %)2bit|(% style="width:84px" %)4bit
263 +|(% style="width:75px" %)**Value**|(% style="width:64px" %)SMOD|(% style="width:88px" %)GPS_MOD|(% style="width:84px" %)BLE_MOD
258 258  
265 +(% style="color:blue" %)**SMOD：**
266 +
267 +(% style="color:red" %)**1 :** (%%) GPS ONLY
268 +
269 +(% style="color:red" %)**2 :** (%%) BLE ONLY
270 +
271 +(% style="color:red" %)**3 :**  (%%) GPS/BLE Hybrid
272 +
273 +
274 +(% style="color:blue" %)**GPS MOD:**
275 +
276 +(% style="color:red" %)**0 : ** (%%) Enable uploading on-board Temperature and humidity values
277 +
278 +(% style="color:red" %)**1 :** (%%) Disable uploading on-board Temperature and humidity values
279 +
280 +
281 +(% style="color:blue" %)**BLE MOD:**
282 +
283 +(% style="color:red" %)**1: ** (%%) BLE Positioning with Strongest iBeacon
284 +
285 +TrackerD Status:  0x02
286 +
287 +(% border="1.5" style="background-color:#ffffcc; color:green; width:345px" %)
288 +|(% style="width:77px" %)**Size(bit)**|(% style="width:91px" %)1bits|(% style="width:48px" %)1bit|(% style="width:126px" %)1bit
289 +|(% style="width:77px" %)**Value**|(% style="width:91px" %)PNACKMD|(% style="width:48px" %)LON|(% style="width:126px" %)Transport** **Mode
290 +
291 +(% style="color:red" %)**0 : **(%%) Transport Mode
292 +
293 +(% style="color:red" %)**1 :  **(%%) AT+LON
294 +
295 +(% style="color:red" %)**2 : **(%%) Datalog Enable/Disable
296 +
297 +
298 +
259 259  === 2.4.2 Uplink FPORT~=2, Realtime GNSS Positioning + Temperature & Humidity ===
260 260  
261 261  
... ... @@ -283,6 +283,8 @@
283 283  |=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)1 bit|(% style="width:80px" %)1bit|(% style="width:50px" %)14bits
284 284  |=(% style="width: 72px;" %)**Value**|(% style="width:67px" %)reserve|(% style="width:118px" %)Alarm Indicate|(% style="width:63px" %)[[BAT>>||anchor="HBAT:"]] 
285 285  
326 +
327 +
286 286  ==== (% style="color:blue" %)**FLAG:**(%%) ====
287 287  
288 288  (% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:250px" %)
... ... @@ -297,6 +297,8 @@
297 297  * Latitude: 02863D68  ⇒  //if (0x//02863D68//& 0x80000000 = 0 )~://  //value = 02863D68 /1000000 = 42.351976//
298 298  * Longitude: FAC29BAF  ⇒ //if (0x//FAC29BAF// & 0x80000000 = 1 )~://  //value = (0x//FAC29BAF// – 0x 100000000)/1000000 =//-87.9094//57//
299 299  
342 +
343 +
300 300  (% style="color:red" %)**Important note:**
301 301  
302 302  1.  When power is low (<2.84v), GPS won't be able to get location info and GPS feature will be disabled and the location field will be filled with 0x0FFFFFFF, 0x0FFFFFFF.
... ... @@ -332,16 +332,31 @@
332 332  * 3.40v ~~ 3.69v:  20% ~~ 40%
333 333  * < 3.39v:  0~~20%
334 334  
379 +
380 +
381 +==== (% style="color:blue" %)**MOD:**(%%) ====
382 +
383 +**Set the format of GPS data uplink link：**
384 +
385 +(% style="color:#037691" %)**0x00:** (%%) Enable uploading on-board Temperature and humidity values
386 +(% style="color:#037691" %)**0x01: ** (%%) Disable uploading on-board Temperature and humidity values
387 +
388 +
389 +**Set the format of BLE data uplink link：**
390 +
391 +(% style="color:#037691" %)**0x01: ** (%%) BLE Positioning with Strongest iBeacon
392 +
393 +
335 335  ==== (% style="color:blue" %)**LON:**(%%) ====
336 336  
337 337  Enable/Disable LED activity for uplink
338 338  
339 339  (((
340 -0x00:  Disable LED indicator.
399 +(% style="color:#037691" %)**0x00:**  (%%) Disable LED indicator.
341 341  )))
342 342  
343 343  (((
344 -0x01:  Enable LED indicator (Default Value)
403 +(% style="color:#037691" %)**0x01:**  (%%) Enable LED indicator (Default Value)
345 345  )))
346 346  
347 347  
... ... @@ -428,6 +428,8 @@
428 428  * (% style="color:#037691" %)**Measured Power: ** (%%) The Measured Power from the strongest iBeacon.
429 429  * (% style="color:#037691" %)**RSSI:  ** (%%) The RSSI from the strongest iBeacon.
430 430  
490 +
491 +
431 431  === 2.4.6  Add Payload format in TTN V3 ===
432 432  
433 433  
... ... @@ -480,10 +480,21 @@
480 480  
481 481  
482 482  
483 -== 2.7 Datalog Feature ==
544 +== 2.7  Datalog Feature ==
484 484  
546 +
485 485  total 273 entries,by default disable
486 486  
549 +
550 +Example use case.
551 +
552 +[[image:image-20221009234703-2.png||height="328" width="899"]]
553 +
554 +
555 +[[image:image-20221009234629-1.png||height="390" width="577"]]
556 +
557 +
558 +
487 487  == 2.8 Alarm Mode ==
488 488  
489 489  
... ... @@ -516,6 +516,7 @@
516 516  In Transport Mode, TrackerD will check if there is motion. If there is no motion, device will send uplinks every 20 minutes. If there is motion, device will send uplink every 5 minutes.
517 517  
518 518  
591 +
519 519  == 2.10 LED Status ==
520 520  
521 521  
... ... @@ -533,6 +533,9 @@
533 533  |(% style="width:157px" %)**Get Downlink**|(% style="width:271px" %)(% style="color:green" %)**GREEN**(%%) led on 1 second|(% style="width:202px" %)Yes
534 534  |(% style="width:157px" %)**Movement Detect**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)led on 500ms|(% style="width:202px" %)N/A
535 535  
609 +
610 +
611 +
536 536  == 2.11 Button Function ==
537 537  
538 538  
... ... @@ -554,6 +554,9 @@
554 554  |(% style="width:135px" %)Exit Alarm Mode|(% style="width:220px" %)Fast press the (% style="color:red" %)**RED** (%%)button 10 times|(% style="width:265px" %)Exit Alarm Mode
555 555  |(% style="width:135px" %)Enter Deep Sleep Mode|(% style="width:220px" %)Press and hold the button for 10 seconds, then quickly press the device 3 times to enter deep sleep|(% style="width:265px" %)This is the mode ship out from factory. CPU will be complete in sleep mode and no LoRa activity, only use before deploy.
556 556  
633 +
634 +
635 +
557 557  == 2.12 USB Port Function ==
558 558  
559 559  
... ... @@ -564,6 +564,9 @@
564 564  * [[Configure Device>>||anchor="H3.ConfigureTrackerDviaATcommandorLoRaWANdownlink"]]
565 565  * [[Upgrade Firmware>>||anchor="H5.UploadFirmware"]]
566 566  
646 +
647 +
648 +
567 567  = 3. Configure TrackerD via AT command or LoRaWAN downlink =
568 568  
569 569  
... ... @@ -711,37 +711,33 @@
711 711  
712 712  * (% style="color:blue" %)**AT Command:**
713 713  
714 -(% style="color:#037691" %)**AT+SMOD=aa,bb**
796 +(% style="color:#037691" %)**AT+SMOD=aa,bb,cc**
715 715  
716 716  (% style="color:#037691" %)** aa:**
717 717  
718 -* (% style="color:#037691" %)**1: GPS ONLY(Factory Settings):    **(%%)only get and uplink GPS location info.
719 -* (% style="color:#037691" %)**2: BLE ONLY:              **(%%)Only obtain iBeacon info via BLE and uplink. Design for Indoor tracking.
720 -* (% style="color:#037691" %)**3: GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.Devices will try to search BLE iBeacon first. If device can't find the iBeacon, it will use GPS for positioning
800 +* (% style="color:red" %)**1: GPS ONLY(Factory Settings):    **(%%)only get and uplink GPS location info.
801 +* (% style="color:red" %)**2: BLE ONLY:              **(%%)Only obtain iBeacon info via BLE and uplink. Design for Indoor tracking.
802 +* (% style="color:red" %)**3: GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.Devices will try to search BLE iBeacon first. If device can't find the iBeacon, it will use GPS for positioning.
721 721  
722 722  (% style="color:#037691" %)**bb:**
723 723  
724 -(% style="color:#037691" %)** if aa = 1: **
806 +* (% style="color:red" %)**0 :  **(%%)GPS+ BAT+ State+Tem&Hum
807 +* (% style="color:red" %)**1 :**(%%)  GPS +BAT State
725 725  
726 -* (% style="color:#037691" %)**0 :  **(%%)GPS+ BAT+ State+Tem&Hum
727 -* (% style="color:#037691" %)**1 :**(%%)  GPS +BAT State
809 +(% style="color:#037691" %)**cc:   **
728 728  
729 -(% style="color:#037691" %)** if aa = 2: **
811 +* (% style="color:red" %)**1 : **(%%) (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State  
730 730  
731 -* (% style="color:#037691" %)**3 :  **(%%)(iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State
813 +(% style="color:blue" %)**Example:**
732 732  
733 - **Example:**
815 + AT+ SMOD =1,0 ,0 ~-~->  GPS+ BAT+ State+Tem&Hum
816 + AT+ SMOD =1,1,0 ~-~->  GPS +BAT State
817 + AT+ SMOD =2,0,1 ~-~->  (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State
734 734  
735 - AT+ SMOD =1,0  **~-~-> ** GPS+ BAT+ State+Tem&Hum
736 736  
737 - AT+ SMOD =1,1    **~-~->**  GPS +BAT State
738 -
739 - AT+ SMOD =2,3    **~-~->**  (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State
740 -
741 -
742 742  * (% style="color:blue" %)**Downlink Payload (prefix 0xA5):**
743 743  
744 -(% style="color:#037691" %)**0xA5 01 00**    (%%) ~/~/  Same as AT+ SMOD =1,0
822 +(% style="color:#037691" %)**0xA5 01 00 00**    (%%) ~/~/  Same as AT+ SMOD =1,0,0
745 745  
746 746  
747 747  
... ... @@ -758,7 +758,7 @@
758 758  
759 759  (% style="color:#037691" %)**AT+FTIME=xx**  (%%) **~-~-> ** Set to use xx as max fix time.
760 760  
761 -Example:  AT+FTIME=150
839 +**Example:**  AT+FTIME=150
762 762  
763 763  
764 764  * (% style="color:blue" %)**Downlink Payload (prefix 0xAA):**
... ... @@ -767,7 +767,7 @@
767 767  
768 768  
769 769  
770 -=== 3.3.9 Set PDOP value for GPS fix accuracy ===
848 +=== 3.2.9 Set PDOP value for GPS fix accuracy ===
771 771  
772 772  
773 773  PDOP(Position Dilution of Precision) filter, TrackerD will only accept GPS data with a lower PDOP value than pre-configure PDOP value. If device can't get a valid GPS packet within FTIME timeout, it will use the GPS data with lowest PDOP value to server.
... ... @@ -795,7 +795,7 @@
795 795  
796 796  * (% style="color:blue" %)**AT Command:**
797 797  
798 -(% style="color:#037691" %)**AT+CFM=xx. **
876 +(% style="color:#037691" %)**AT+CFM=xx**
799 799  
800 800  
801 801  **~ Example:**
... ... @@ -811,6 +811,27 @@
811 811  
812 812  
813 813  
892 +=== 3.2.10  Auto Send None-ACK messages ===
893 +
894 +
895 +TrackerD will wait for ACK for each uplink, If TrackerD doesn't get ACK from the IoT server, it will consider the message doesn't arrive server and store it. TrackerD keeps sending messages in normal periodically. Once TrackerD gets ACK from a server, it will consider the network is ok and start to send the not-arrive message.
896 +
897 +
898 +* (% style="color:blue" %)**AT Command: AT+PNACKMD**
899 +
900 +The default factory setting is 0.
901 +
902 +
903 +**Command Example Function Response:**
904 +
905 +(% style="color:#037691" %)**AT+PNACKMD=1**  (%%) ~/~/  Poll None-ACK message OK
906 +
907 +
908 +* (% style="color:blue" %)**Downlink Command: 0x34**
909 +
910 +Example: 0x3401  ~/~/  Same as AT+PNACKMD=1
911 +
912 +
814 814  = 4. Setting for Different Scenarios =
815 815  
816 816  
... ... @@ -853,7 +853,7 @@
853 853  
854 854  (% style="color:blue" %)**Step5:** (%%) Select the firmware file (.bin format), com port and proper SPI configure. Clink Start. Bin file location:
855 855  
856 -[[https:~~/~~/www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0>>url:https://www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0]]
955 +[[https:~~/~~/github.com/dragino/TrackerD/releases>>https://github.com/dragino/TrackerD/releases]]
857 857  
858 858  
859 859  Users need to use below files:
... ... @@ -890,6 +890,7 @@
890 890  [[image:1664503635019-941.png]]
891 891  
892 892  
992 +
893 893  * (% style="color:#037691" %)**Go to tools ~-~-> Boards ~-~-> Boards Manager**,(%%) **find the esp32 information and install it.**
894 894  
895 895  [[image:1664503715811-892.png]]
... ... @@ -954,6 +954,9 @@
954 954  |(% style="width:118px" %)A8|(% style="width:67px" %)Yellow|(% style="width:123px" %)MTMS/GPIO14
955 955  |(% style="width:118px" %)B8|(% style="width:67px" %)Grey|(% style="width:123px" %)MTDO/GPIO15
956 956  
1057 +
1058 +
1059 +
957 957  = 8.  Order Info =
958 958  
959 959  
... ... @@ -969,6 +969,8 @@
969 969  * (% style="color:red" %)**AU915**(%%): Default frequency band AU915
970 970  * (% style="color:red" %)**US915**(%%): Default frequency band US915
971 971  
1075 +
1076 +
972 972  = 9.  Packing Info =
973 973  
974 974  
... ... @@ -982,6 +982,8 @@
982 982  * Device Size: 85 x 48 x 15 cm
983 983  * Weight: 50g
984 984  
1090 +
1091 +
985 985  = 10. Support =
986 986  
987 987  
... ... @@ -988,6 +988,8 @@
988 988  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
989 989  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]].
990 990  
1098 +
1099 +
991 991  = 11.  Reference =
992 992  
993 993  
image-20221009234629-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +222.9 KB
Content
image-20221009234703-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +136.4 KB
Content