Skip to Content
Last modified by Xiaoling on 2023/12/27 09:15
From version 66.1
edited by Xiaoling
on 2022/10/09 15:49
Change comment: Uploaded new attachment "1665301786397-168.png", version {1}
To version 77.1
edited by Edwin Chen
on 2022/10/13 23:15
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -1,5 +3,3 @@
1 -== ==
2 -
3 3  (% style="text-align:center" %)
4 4  [[image:1664505654417-133.png]]
5 5  
... ... @@ -185,8 +185,10 @@
185 185  (% style="color:blue" %)**Step 3:**(%%) TrackerD will auto join to the LoRaWAN network. After join success, TrackerD will start to upload message to IoT server.
186 186  
187 187  
188 -== 2.3 Positioning Mode(SMOD) ==
189 189  
187 +== 2.3  Positioning Mode(SMOD) ==
188 +
189 +
190 190  Users can set TrackerD to different Positioning Mode for different applications. Below mod are supported.
191 191  
192 192  * (% style="color:#037691" %)**GPS ONLY(Factory Settings):    **(%%)only get and uplink GPS location info.
... ... @@ -196,26 +196,33 @@
196 196  Users can switch modes by [[changing SMOD>>||anchor="H3.2.7SetPositioningMode"]].
197 197  
198 198  
199 -== 2.3 Uplink Payload ==
200 200  
200 +== 2.4  Uplink Payload ==
201 201  
202 -=== 2.3.1 Uplink FPORT~=5, Device Status ===
203 203  
204 -Uplink the device configures with FPORT=5. Once LGT92 Joined the network, it will uplink this message to the server. After first uplink, LHT52 will uplink Device Status every 12 hours.
203 +=== 2.4.1 Uplink FPORT~=5, Device Status ===
205 205  
206 -|=(% style="width: 150px;" %)**Size (bytes)**|=(% style="width: 233px;" %)**1**|=(% style="width: 150px;" %)**2**|=(% style="width: 164px;" %)**1**|=(% style="width: 215px;" %)**1**|=(% style="width: 94px;" %)2|=(% style="width: 516px;" %)**2**|=(% style="width: 516px;" %)1
207 -|(% style="width:150px" %)**Value**|(% style="width:233px" %)Sensor Model|(% style="width:150px" %)Firmware Version|(% style="width:164px" %)Frequency Band|(% style="width:215px" %)Sub-band|(% style="width:94px" %)BAT|(% style="width:516px" %)SMOD|(% style="width:516px" %)Status
208 208  
209 -[[image:image-20221006181357-2.png]]
206 +Uplink the device configures with FPORT=5. Once TrackerD Joined the network, it will uplink this message to the server. After the first uplink, TrackerD will uplink Device Status every 12 hours.
210 210  
211 -Example Payload (FPort=5):  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT52%20-%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220621105116-11.png?rev=1.1||alt="image-20220621105116-11.png"]]
208 +Use can also get the Device Status uplink through the downlink command: **Downlink:  0x2301**
212 212  
213 -**Sensor Model**: For TrackerD, this value is 0x13.
214 214  
215 -**Firmware Version**: 0x0100, Means: v1.0.0 version.
211 +(% border="1.5" style="background-color:#ffffcc; color:green; width:520px" %)
212 +|=(% scope="row" style="width: 108px;" %)**Size(bytes)**|=(% style="width: 82px;" %)**1**|=(% style="width: 83px;" %)**2**|=(% style="width: 94px;" %)**1**|=(% style="width: 84px;" %)**1**|=(% style="width: 44px;" %)2|=(% style="width: 63px;" %)**2**|=(% style="width: 60px;" %)1
213 +|=(% style="width: 108px;" %)**Value**|(% style="width:82px" %)Sensor Model|(% style="width:83px" %)Firmware Version|(% style="width:94px" %)Frequency Band|(% style="width:84px" %)Sub-band|(% style="width:44px" %)BAT|(% style="width:63px" %)SMOD|(% style="width:60px" %)Status
216 216  
217 -**Frequency Band**:
215 +[[image:1665301570342-765.png]]
218 218  
217 +
218 +(% style="color:#037691" %)**Example of Device Status:**(%%) 13014001FF0FA24002
219 +
220 +(% style="color:#037691" %)**Sensor Model:** (%%) For TrackerD,this value is 0x13
221 +
222 +(% style="color:#037691" %)**Firmware Version: **(%%) 0x0140,Means:v1.4.0 version
223 +
224 +(% style="color:#037691" %)**Frequency Band**:
225 +
219 219  *0x01: EU868
220 220  
221 221  *0x02: US915
... ... @@ -236,21 +236,61 @@
236 236  
237 237  *0x0a: AS923-3
238 238  
239 -**Sub-Band**: value 0x00 ~~ 0x08(only for CN470, AU915,US915. Others are0x00)
246 +Sub- Band:value 0x00~~0x08(only forAU915,US915,Others are 0xFF)
240 240  
241 -**BAT**: shows the battery voltage for TrackerD.
248 +(% style="color:#037691" %)**BAT:**(%%) shows the battery voltage for TrackerD.
242 242  
243 -Ex1: 0x0B3A = 2874mV
244 244  
251 +(% style="color:#037691" %)**Ex1:**(%%) 0x0FA2 = 4002mV
252 +
245 245  Use can also get the Device Status uplink through the downlink command:
246 246  
247 247  
248 -=== 2.3.2 Uplink FPORT~=2, Realtime GNSS Positioning + Temperature & Humidity ===
249 249  
257 +(% style="color:#037691" %)**SMOD Field (total 1 byte)**(%%)：0x40
250 250  
251 -User can use **AT+SMOD=1,0** to enable uploading on-board Temperature and humidity values, and the total payload will be 15 bytes, please note that 15 bytes won't work on DR0 on US915/AU915 frequency band.
259 +(% border="1.5" style="background-color:#ffffcc; color:green; width:420px" %)
260 +|(% style="width:75px" %)**Size(bit)**|(% style="width:64px" %)2bits|(% style="width:137px" %)2bit|(% style="width:142px" %)4bit
261 +|(% style="width:75px" %)**Value**|(% style="width:64px" %)SMOD|(% style="width:137px" %)GPS_Settings|(% style="width:142px" %)BLE_Settings
252 252  
263 +(% style="color:blue" %)** SMOD：**
253 253  
265 +(% style="color:red" %)** 1 :** (%%) GPS ONLY
266 +
267 +(% style="color:red" %)** 2 :** (%%) BLE ONLY
268 +
269 +(% style="color:red" %)** 3 :**  (%%) GPS/BLE Hybrid
270 +
271 +
272 +(% style="color:blue" %)** GPS_MOD: Define how to send GPS payload**
273 +
274 +(% style="color:red" %)** 0 : ** (%%) Enable uploading on-board Temperature and humidity values
275 +
276 +(% style="color:red" %)** 1 :** (%%) Disable uploading on-board Temperature and humidity values
277 +
278 +
279 +(% style="color:blue" %)** BLE_Settings:**
280 +
281 +(% style="color:red" %)** 1: ** (%%) BLE Positioning with Strongest iBeacon
282 +
283 +
284 +
285 +(% style="color:#037691" %)**Status Field (total 1 byte)**(%%):  0x02
286 +
287 +(% border="1.5" style="background-color:#ffffcc; color:green; width:450px" %)
288 +|(% style="width:77px" %)**Size(bit)**|(% style="width:82px" %)5 Bits|(% style="width:106px" %)1 Bit|(% style="width:67px" %)1 Bit|(% style="width:121px" %)1 Bit
289 +|(% style="width:77px" %)**Value**|(% style="width:82px" %)Reserve|(% style="width:106px" %)PNACKMD|(% style="width:67px" %)LON|(% style="width:121px" %)Transport** **Mode
290 +
291 +
292 +
293 +=== 2.4.2 Uplink FPORT~=2, Realtime GNSS Positioning + Temperature & Humidity ===
294 +
295 +
296 +Users can use **AT+SMOD=1,0,0** to enable uploading on-board Temperature and humidity values, and the total payload will be 15 bytes,
297 +
298 +(% style="color:red" %)Please note that 15 bytes won't work on DR0 on US915/AU915 frequency band. IoT server will see NULL payload in this case.(%%)
299 +
300 +
254 254  (% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:480px" %)
255 255  |=(% scope="row" style="width: 50px;" %)(((
256 256  **Size(bytes)**
... ... @@ -263,7 +263,7 @@
263 263  [[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
264 264  )))|(% style="width:73px" %)[[FLAG>>||anchor="HFLAG:"]]|(% style="width:40px" %)[[Hum>>||anchor="HHum:"]]|(% style="width:87px" %)[[Tem>>||anchor="HTem:"]]
265 265  
266 -[[image:1664501958445-288.png]]
313 +[[image:1665301636888-168.png]]
267 267  
268 268  
269 269  ==== (% style="color:blue" %)**Alarm & BAT:**(%%) ====
... ... @@ -304,12 +304,12 @@
304 304  
305 305  ==== (% style="color:blue" %)**Alarm:**(%%) ====
306 306  
307 -Example:  0x4B & 0x40 >> 6 = 0x01
354 +**Example: ** 0x4B & 0x40 >> 6 = 0x01
308 308  
309 309  
310 310  ==== (% style="color:blue" %)**BAT:**(%%) ====
311 311  
312 -Example:  0x0CDD & 0x3FFF ⇒ 3293 (mV).
359 +**Example: ** 0x4B45 & 0x3FFF ⇒ 2885 (mV).
313 313  
314 314  (((
315 315  The battery info shows the battery voltage, User can use the below mapping to indicate the battery in percentage: \
... ... @@ -321,19 +321,37 @@
321 321  * 3.40v ~~ 3.69v:  20% ~~ 40%
322 322  * < 3.39v:  0~~20%
323 323  
371 +==== (% style="color:blue" %)**MOD:**(%%) ====
372 +
373 +**Example: ** (0x60>>6)& 0x3f =1.
374 +
375 +**Set the format of GPS data uplink link：**
376 +
377 +(% style="color:#037691" %)**0x00:** (%%) Enable uploading on-board Temperature and humidity values
378 +(% style="color:#037691" %)**0x01: ** (%%) Disable uploading on-board Temperature and humidity values
379 +
380 +
381 +**Set the format of BLE data uplink link：**
382 +
383 +(% style="color:#037691" %)**0x01: ** (%%) BLE Positioning with Strongest iBeacon
384 +
385 +
324 324  ==== (% style="color:blue" %)**LON:**(%%) ====
325 325  
388 +**Example:** (0x60>>5) & 0x01=1.
389 +
326 326  Enable/Disable LED activity for uplink
327 327  
328 328  (((
329 -0x00:  Disable LED indicator.
393 +(% style="color:#037691" %)**0x00:**  (%%) Disable LED indicator.
330 330  )))
331 331  
332 332  (((
333 -0x01:  Enable LED indicator (Default Value)
397 +(% style="color:#037691" %)**0x01:**  (%%) Enable LED indicator (Default Value)
334 334  )))
335 335  
336 336  
401 +
337 337  ==== (% style="color:blue" %)**Hum:**(%%) ====
338 338  
339 339  0202 = //if (0x0202 & 0x8000 = 0 ):  value =// 0x0202 / 100 = +514 ⇒ 51.4 degree
... ... @@ -344,8 +344,10 @@
344 344  011A =if (0x011A & 0x8000 = 1 ):  value =( 0x011A - 0x10000)/10(dec) ⇒ -//28.2 degree//
345 345  
346 346  
347 -=== 2.3.3  Uplink FPORT~=3, Realtime GNSS Positioning (Default Mode) ===
348 348  
413 +=== 2.4.3  Uplink FPORT~=3, Realtime GNSS Positioning (Default Mode) ===
414 +
415 +
349 349  The default uplink payload includes totally 11 bytes. The payload is the first 11 bytes of Uplink FPORT=2, real-time GNSS positioning, (remove the temp and humidity)
350 350  
351 351  
... ... @@ -357,22 +357,37 @@
357 357  [[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
358 358  )))|(% style="width:73px" %)[[FLAG>>||anchor="HFLAG:"]]
359 359  
360 -=== 2.3.4  Uplink FPORT~=4, History GNSS Positioning ===
427 +(% class="wikigeneratedid" %)
428 +[[image:1665301687277-443.png]]
361 361  
430 +
431 +
432 +=== 2.4.4  Uplink FPORT~=4, History GNSS Positioning ===
433 +
434 +
362 362  Set [[PNACKMD=1>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H4.13AutoSendNone-ACKmessages]], and TrackerD will wait for ACK for every uplink, when there is no LoRaWAN network, TrackerD will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
363 363  
364 -**Note for this mode:**
365 365  
438 +(% style="color:red" %)**Note for this mode:**
439 +
366 366  * a) TrackerD will do an ACK check for data records sending to make sure every data arrive server.
367 -* b) TrackerD will send data in **CONFIRMED Mode** when PNACKMD=1, but TrackerD won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink, if TrackerD gets an ACK, TrackerD will consider there is a network connection and resend all NONE-ACK Messages.
441 +* b) TrackerD will send data in (% style="color:blue" %)**CONFIRMED Mode**(%%) when PNACKMD=1, but TrackerD won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink, if TrackerD gets an ACK, TrackerD will consider there is a network connection and resend all NONE-ACK Messages.
368 368  
369 369  The payload is 15 bytes, as below.
370 370  
445 +(% border="1.5" style="background-color:#ffffcc; color:green; width:520px" %)
446 +|=(% scope="row" %)(((
447 +**Size(bytes)**
448 +)))|4|4|2|1|1|1|1|1
449 +|=**Value**|Latitude|Longitude|Year|Month|Day|Hous|Min|Sen
371 371  
451 +[[image:image-20221009160309-2.png]]
372 372  
373 -=== 2.3.5  Uplink FPORT~=6, BLE Positioning with Strongest iBeacon ===
374 374  
375 375  
455 +=== 2.4.5  Uplink FPORT~=6, BLE Positioning with Strongest iBeacon ===
456 +
457 +
376 376  (% border="1.5" cellspacing="3" style="background-color:#ffffcc; color:green; width:450px" %)
377 377  |=(% scope="row" style="width: 60px;" %)(((
378 378  **Size(bytes)**
... ... @@ -400,7 +400,7 @@
400 400  * (% style="color:#037691" %)**Measured Power: ** (%%) The Measured Power from the strongest iBeacon.
401 401  * (% style="color:#037691" %)**RSSI:  ** (%%) The RSSI from the strongest iBeacon.
402 402  
403 -=== 2.3.5 Add Payload format in TTN V3 ===
485 +=== 2.4.6  Add Payload format in TTN V3 ===
404 404  
405 405  
406 406  In TTN V3, use can add a custom payload so it shows friendly.
... ... @@ -420,7 +420,7 @@
420 420  
421 421  
422 422  
423 -== 2.4 Integrate with Datacake ==
505 +== 2.5 Integrate with Datacake ==
424 424  
425 425  
426 426  (((
... ... @@ -436,7 +436,7 @@
436 436  
437 437  
438 438  
439 -== 2.5 Integrate with Tago ==
521 +== 2.6 Integrate with Tago ==
440 440  
441 441  
442 442  (((
... ... @@ -452,13 +452,24 @@
452 452  
453 453  
454 454  
455 -== 2.6 Datalog Feature ==
537 +== 2.7  Datalog Feature ==
456 456  
539 +
457 457  total 273 entries,by default disable
458 458  
459 -== 2.6 Alarm Mode ==
460 460  
543 +Example use case.
461 461  
545 +[[image:image-20221009234703-2.png||height="328" width="899"]]
546 +
547 +
548 +[[image:image-20221009234629-1.png||height="390" width="577"]]
549 +
550 +
551 +
552 +== 2.8 Alarm Mode ==
553 +
554 +
462 462  (((
463 463  User can push the (% style="color:red" %)**RED button**(%%) by more than 5 seconds to enter Alarm Mode.
464 464  )))
... ... @@ -482,15 +482,16 @@
482 482  
483 483  
484 484  
485 -== 2.7 Transport Mode ==
578 +== 2.9 Transport Mode ==
486 486  
487 487  
488 488  In Transport Mode, TrackerD will check if there is motion. If there is no motion, device will send uplinks every 20 minutes. If there is motion, device will send uplink every 5 minutes.
489 489  
490 490  
491 -== 2.8 LED Status ==
492 492  
585 +== 2.10 LED Status ==
493 493  
587 +
494 494  (% border="1.5" style="background-color:#ffffcc; color:green; width:500px" %)
495 495  |=(% style="width: 150px;" %)**Event**|=(% style="width: 200px;" %)**Action**|=(% style="width: 150px;" %)**AT+LON to control on/off**
496 496  |(% style="width:157px" %)**Power On**|(% style="width:271px" %)(% style="color:blue" %)**BLUE, **(% style="color:red" %)**RED , **(% style="color:green" %)**Green** flash once|(% style="width:202px" %)N/A
... ... @@ -505,7 +505,7 @@
505 505  |(% style="width:157px" %)**Get Downlink**|(% style="width:271px" %)(% style="color:green" %)**GREEN**(%%) led on 1 second|(% style="width:202px" %)Yes
506 506  |(% style="width:157px" %)**Movement Detect**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)led on 500ms|(% style="width:202px" %)N/A
507 507  
508 -== 2.9 Button Function ==
602 +== 2.11 Button Function ==
509 509  
510 510  
511 511  (% style="color:blue" %)**RESET button:**
... ... @@ -526,7 +526,7 @@
526 526  |(% style="width:135px" %)Exit Alarm Mode|(% style="width:220px" %)Fast press the (% style="color:red" %)**RED** (%%)button 10 times|(% style="width:265px" %)Exit Alarm Mode
527 527  |(% style="width:135px" %)Enter Deep Sleep Mode|(% style="width:220px" %)Press and hold the button for 10 seconds, then quickly press the device 3 times to enter deep sleep|(% style="width:265px" %)This is the mode ship out from factory. CPU will be complete in sleep mode and no LoRa activity, only use before deploy.
528 528  
529 -== 2.10 USB Port Function ==
623 +== 2.12 USB Port Function ==
530 530  
531 531  
532 532  The USB interface of TrackerD has below functions:
... ... @@ -683,38 +683,33 @@
683 683  
684 684  * (% style="color:blue" %)**AT Command:**
685 685  
686 -(% style="color:#037691" %)**AT+SMOD=aa,bb**
780 +(% style="color:#037691" %)**AT+SMOD=aa,bb,cc**
687 687  
688 688  (% style="color:#037691" %)** aa:**
689 689  
690 -* (% style="color:#037691" %)**1: GPS ONLY(Factory Settings):    **(%%)only get and uplink GPS location info.
691 -* (% style="color:#037691" %)**2: BLE ONLY:              **(%%)Only obtain iBeacon info via BLE and uplink. Design for Indoor tracking.
692 -* (% style="color:#037691" %)**3: GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.Devices will try to search BLE iBeacon first. If device can't find the iBeacon, it will use GPS for positioning
784 +* (% style="color:red" %)**1: GPS ONLY(Factory Settings):    **(%%)only get and uplink GPS location info.
785 +* (% style="color:red" %)**2: BLE ONLY:              **(%%)Only obtain iBeacon info via BLE and uplink. Design for Indoor tracking.
786 +* (% style="color:red" %)**3: GPS/BLE Hybrid:   **(%%)Combination for Indoor and Outdoor tracking.Devices will try to search BLE iBeacon first. If device can't find the iBeacon, it will use GPS for positioning.
693 693  
694 694  (% style="color:#037691" %)**bb:**
695 695  
696 -(% style="color:#037691" %)** if aa = 1: **
790 +* (% style="color:red" %)**0 :  **(%%)GPS+ BAT+ State+Tem&Hum
791 +* (% style="color:red" %)**1 :**(%%)  GPS +BAT State
697 697  
698 -* (% style="color:#037691" %)**0 :  **(%%)GPS+ BAT+ State+Tem&Hum
699 -* (% style="color:#037691" %)**1 :**(%%)  GPS +BAT State
793 +(% style="color:#037691" %)**cc:   **
700 700  
701 -(% style="color:#037691" %)** if aa = 2: **
795 +* (% style="color:red" %)**1 : **(%%) (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State  
702 702  
703 -* (% style="color:#037691" %)**3 :  **(%%)(iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State
797 +(% style="color:blue" %)**Example:**
704 704  
799 + AT+ SMOD =1,0 ,0 ~-~->  GPS+ BAT+ State+Tem&Hum
800 + AT+ SMOD =1,1,0 ~-~->  GPS +BAT State
801 + AT+ SMOD =2,0,1 ~-~->  (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State
705 705  
706 - **Example:**
707 707  
708 - AT+ SMOD =1,0  **~-~-> ** GPS+ BAT+ State+Tem&Hum
709 -
710 - AT+ SMOD =1,1    **~-~->**  GPS +BAT State
711 -
712 - AT+ SMOD =2,3    **~-~->**  (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State
713 -
714 -
715 715  * (% style="color:blue" %)**Downlink Payload (prefix 0xA5):**
716 716  
717 -(% style="color:#037691" %)**0xA5 01 00**    (%%) ~/~/  Same as AT+ SMOD =1,0
806 +(% style="color:#037691" %)**0xA5 01 00 00**    (%%) ~/~/  Same as AT+ SMOD =1,0,0
718 718  
719 719  
720 720  
... ... @@ -731,7 +731,7 @@
731 731  
732 732  (% style="color:#037691" %)**AT+FTIME=xx**  (%%) **~-~-> ** Set to use xx as max fix time.
733 733  
734 -Example:  AT+FTIME=150
823 +**Example:**  AT+FTIME=150
735 735  
736 736  
737 737  * (% style="color:blue" %)**Downlink Payload (prefix 0xAA):**
... ... @@ -740,7 +740,7 @@
740 740  
741 741  
742 742  
743 -=== 3.3.9 Set PDOP value for GPS fix accuracy ===
832 +=== 3.2.9 Set PDOP value for GPS fix accuracy ===
744 744  
745 745  
746 746  PDOP(Position Dilution of Precision) filter, TrackerD will only accept GPS data with a lower PDOP value than pre-configure PDOP value. If device can't get a valid GPS packet within FTIME timeout, it will use the GPS data with lowest PDOP value to server.
... ... @@ -768,7 +768,7 @@
768 768  
769 769  * (% style="color:blue" %)**AT Command:**
770 770  
771 -(% style="color:#037691" %)**AT+CFM=xx. **
860 +(% style="color:#037691" %)**AT+CFM=xx**
772 772  
773 773  
774 774  **~ Example:**
... ... @@ -784,6 +784,27 @@
784 784  
785 785  
786 786  
876 +=== 3.2.10  Auto Send None-ACK messages ===
877 +
878 +
879 +TrackerD will wait for ACK for each uplink, If TrackerD doesn't get ACK from the IoT server, it will consider the message doesn't arrive server and store it. TrackerD keeps sending messages in normal periodically. Once TrackerD gets ACK from a server, it will consider the network is ok and start to send the not-arrive message.
880 +
881 +
882 +* (% style="color:blue" %)**AT Command: AT+PNACKMD**
883 +
884 +The default factory setting is 0.
885 +
886 +
887 +**Command Example Function Response:**
888 +
889 +(% style="color:#037691" %)**AT+PNACKMD=1**  (%%) ~/~/  Poll None-ACK message OK
890 +
891 +
892 +* (% style="color:blue" %)**Downlink Command: 0x34**
893 +
894 +Example: 0x3401  ~/~/  Same as AT+PNACKMD=1
895 +
896 +
787 787  = 4. Setting for Different Scenarios =
788 788  
789 789  
... ... @@ -826,7 +826,7 @@
826 826  
827 827  (% style="color:blue" %)**Step5:** (%%) Select the firmware file (.bin format), com port and proper SPI configure. Clink Start. Bin file location:
828 828  
829 -[[https:~~/~~/www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0>>url:https://www.dropbox.com/sh/733s8xlwahhqg1d/AABxDz80lBVX_to8zNuUQWFja?dl=0]]
939 +[[https:~~/~~/github.com/dragino/TrackerD/releases>>https://github.com/dragino/TrackerD/releases]]
830 830  
831 831  
832 832  Users need to use below files:
... ... @@ -863,6 +863,7 @@
863 863  [[image:1664503635019-941.png]]
864 864  
865 865  
976 +
866 866  * (% style="color:#037691" %)**Go to tools ~-~-> Boards ~-~-> Boards Manager**,(%%) **find the esp32 information and install it.**
867 867  
868 868  [[image:1664503715811-892.png]]
image-20221009160220-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +46.4 KB
Content
image-20221009160309-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +57.2 KB
Content
image-20221009234629-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +222.9 KB
Content
image-20221009234703-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +136.4 KB
Content