Skip to Content
Last modified by Xiaoling on 2023/12/27 09:15
From version 188.1
edited by Bei Jinggeng
on 2023/01/06 11:45
Change comment: There is no comment for this version
To version 216.7
edited by Xiaoling
on 2023/12/27 08:53
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -TrackerD -LoRaWAN Tracker User Manual
1 +TrackerD - LoRaWAN Tracker User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Bei
1 +XWiki.Xiaoling
Content
... ... @@ -23,7 +23,7 @@
23 23  )))
24 24  
25 25  (((
26 -In TrackerD, there are various sensors such as GPS, WiFi, BLE, Temperature, Humidity, Motion Detection, and Buzzer. User can use TrackerD for different tracking scenario.
26 +In TrackerD, there are various sensors such as GPS,BLE, Temperature, Humidity, Motion Detection, and Buzzer. User can use TrackerD for different tracking scenario.
27 27  
28 28  (((
29 29  TrackerD is program friendly. Developers can use Arduino IDE to customize the software of TrackerD to fit their IoT solution.
... ... @@ -37,7 +37,7 @@
37 37  TrackerD is equipped with a (% style="color:blue" %)**1000mAh Li-on rechargeable battery**(%%). Each TrackerD has a worldwide unique OTAA keys to join the LoRaWAN network.
38 38  )))
39 39  
40 -[[image:1664499921684-770.png||_mstalt="298194"]]
40 +[[image:image-20230213110119-1.png||height="382" width="834"]]
41 41  
42 42  
43 43  (% style="color:red" %)**Note: LoRaWAN server can be a general LoRaWAN server other than TTN.**
... ... @@ -51,7 +51,6 @@
51 51  * Espressif ESP32 PICO D4
52 52  * MCU: ESP32 PICO D4
53 53  * Bluetooth: Bluetooth V4.2 BR/EDR and Bluetooth LE
54 -* WiFi : 802.11 b/g/n (802.11n up to 150 Mbps)
55 55  * Integrated SPI flash : 4 MB
56 56  * RAM: 448 KB
57 57  * EEPROM: 520 KB
... ... @@ -93,7 +93,10 @@
93 93  * LoRa Transmit Mode: 125mA @ 20dBm 44mA @ 14dBm
94 94  * Tracking: max: 38mA
95 95  
95 +(% style="display:none" %)
96 96  
97 +
98 +
97 97  == 1.3  Features ==
98 98  
99 99  
... ... @@ -102,7 +102,7 @@
102 102  * SX1276/78 Wireless Chip
103 103  * Arduino IDE Compatible
104 104  * Open source hardware / software
105 -* Regular/ Real-time GPS,BLE,WIFI tracking
107 +* Regular/ Real-time GPS,BLE
106 106  * Built-in3 axis accelerometer (LIS3DH)
107 107  * Humidity / temperature sensor : GXCAS Technology GXHT3X
108 108  * Motion sensing capability
... ... @@ -112,7 +112,10 @@
112 112  * Tri-color LED, Alarm button
113 113  * Datalog
114 114  
117 +(% style="display:none" %)
115 115  
119 +
120 +
116 116  == 1.4  Applications ==
117 117  
118 118  
... ... @@ -119,7 +119,10 @@
119 119  * Logistics and Supply Chain Management
120 120  * Human tracking
121 121  
127 +(% style="display:none" %)
122 122  
129 +
130 +
123 123  = 2.  Use TrackerD =
124 124  
125 125  == 2.1 How it works? ==
... ... @@ -134,10 +134,9 @@
134 134  Here is an example for how to join the [[TTNv3 LoRaWAN Network>>url:https://eu1.cloud.thethings.network]]. Below is the network structure, we use LPS8N as LoRaWAN gateway in this example. 
135 135  
136 136  
137 -[[image:1664501652064-326.png||_mstalt="293306"]]
145 +[[image:image-20230213110214-2.png||height="388" width="847"]]
138 138  
139 139  
140 -
141 141  The LPS8N is already set to connect to [[TTN V3 network >>url:https://eu1.cloud.thethings.network/]]. What the rest need to is register this device in TTN V3:
142 142  
143 143  
... ... @@ -146,7 +146,7 @@
146 146  Each TrackerD is shipped with a sticker with the default device EUI as below:
147 147  
148 148  
149 -[[image:1664501677253-891.png||_mstalt="296569"]]
156 +[[image:image-20230426085815-1.png||height="259" width="558"]]
150 150  
151 151  
152 152  Input these keys to their LoRaWAN Server portal. Below is TTN V3 screen shot:
... ... @@ -154,11 +154,9 @@
154 154  
155 155  **__Add APP EUI in the application:__**
156 156  
157 -
158 158  [[image:1664501711466-918.png||_mstalt="295828"]]
159 159  
160 160  
161 -
162 162  [[image:1664501721248-725.png||_mstalt="294450"]]
163 163  
164 164  
... ... @@ -165,7 +165,6 @@
165 165  [[image:1664501734705-405.png||_mstalt="293306"]]
166 166  
167 167  
168 -
169 169  **__Add APP KEY and DEV EUI:__**
170 170  
171 171  
... ... @@ -172,7 +172,6 @@
172 172  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LDS02%20-%20LoRaWAN%20Door%20Sensor%20User%20Manual/WebHome/1654671889112-678.png?rev=1.1||_mstalt="298233" alt="1654671889112-678.png"]]
173 173  
174 174  
175 -
176 176  (% style="color:blue" %)**Step 2**:(%%) Push this button will activate this device.
177 177  
178 178  (% id="cke_bm_7709S" style="display:none" %) [[image:1664502835802-546.png||_mstalt="295061"]]
... ... @@ -189,7 +189,7 @@
189 189  Users can set TrackerD to different Positioning Mode for different applications. Below mod are supported.
190 190  
191 191  * (% style="color:#037691" %)**GPS ONLY(Factory Settings):    **(%%)Only get and uplink GPS location info.
192 -* (% style="color:#037691" %)**BLE or WiFi ONLY:            **(%%)** **Only obtain iBeacon info via BLE and uplink  or obtain wifi ssid info via WiFi and uplink. Design for Indoor tracking.
195 +* (% style="color:#037691" %)**BLE:            **(%%)** **Only obtain iBeacon info via BLE and uplink uplink. Design for Indoor tracking.
193 193  * (% style="color:#037691" %)**GPS/BLE Hybrid:                        **(%%)Combination for Indoor and Outdoor tracking. Devices will try to search BLE iBeacon first. If device can't find the iBeacon, it will use GPS for positioning.
194 194  
195 195  Users can switch modes by [[changing SMOD>>||anchor="H3.2.7SetPositioningMode"]].
... ... @@ -200,15 +200,14 @@
200 200  === 2.4.1 Uplink FPORT~=5, Device Status ===
201 201  
202 202  
203 -Uplink the device configures with FPORT=5. Once TrackerD Joined the network, it will uplink this message to the server. After the first uplink, TrackerD will uplink Device Status every 12 hours.
206 +Uplink the device configures with (% style="color:blue" %)**FPORT=5**(%%). Once TrackerD Joined the network, it will uplink this message to the server. After the first uplink, TrackerD will uplink Device Status every 12 hours.
204 204  
205 -Use can also get the Device Status uplink through the downlink command: **Downlink:  0x2301**
208 +Use can also get the Device Status uplink through the downlink command: (% style="color:#037691" %)**Downlink:  0x2301**
206 206  
210 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:440px" %)
211 +|(% style="background-color:#d9e2f3; color:#0070c0; width:60px" %)**Size(bytes)**|=(% style="width: 70px;background-color:#D9E2F3;color:#0070C0" %)1|=(% style="width: 70px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 70px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 30px;background-color:#D9E2F3;color:#0070C0" %)2|=(% style="width: 40px;background-color:#D9E2F3;color:#0070C0" %)1|=(% style="width: 40px;background-color:#D9E2F3;color:#0070C0" %)1
212 +|(% style="width:108px" %)**Value**|(% style="width:82px" %)Sensor Model|(% style="width:83px" %)Firmware Version|(% style="width:94px" %)Frequency Band|(% style="width:84px" %)Sub-band|(% style="width:44px" %)BAT|(% style="width:63px" %)SMOD|(% style="width:60px" %)Status
207 207  
208 -(% border="1.5" style="background-color:#ffffcc; color:green; width:440px" %)
209 -|=(% style="width: 60px;" %)**Size(bytes)**|=(% style="width: 70px;" %)**1**|=(% style="width: 70px;" %)**2**|=(% style="width: 70px;" %)**1**|=(% style="width: 50px;" %)**1**|=(% style="width: 30px;" %)2|=(% style="width: 40px;" %)**2**|=(% style="width: 40px;" %)1
210 -|=(% style="width: 108px;" %)**Value**|(% style="width:82px" %)Sensor Model|(% style="width:83px" %)Firmware Version|(% style="width:94px" %)Frequency Band|(% style="width:84px" %)Sub-band|(% style="width:44px" %)BAT|(% style="width:63px" %)SMOD|(% style="width:60px" %)Status
211 -
212 212  [[image:1665301570342-765.png||_mstalt="294580"]]
213 213  
214 214  
... ... @@ -220,31 +220,30 @@
220 220  
221 221  (% style="color:#037691" %)**Frequency Band**:
222 222  
223 -*0x01: EU868
225 +0x01: EU868
224 224  
225 -*0x02: US915
227 +0x02: US915
226 226  
227 -*0x03: IN865
229 +0x03: IN865
228 228  
229 -*0x04: AU915
231 +0x04: AU915
230 230  
231 -*0x05: KZ865
233 +0x05: KZ865
232 232  
233 -*0x06: RU864
235 +0x06: RU864
234 234  
235 -*0x07: AS923
237 +0x07: AS923
236 236  
237 -*0x08: AS923-1
239 +0x08: AS923-1
238 238  
239 -*0x09: AS923-2
241 +0x09: AS923-2
240 240  
241 -*0x0a: AS923-3
243 +0x0a: AS923-3
242 242  
243 -Sub- Band:value 0x00~~0x08(only forAU915,US915,Others are 0xFF)
245 +(% style="color:#037691" %)**Sub-Band:**(%%) value 0x00~~0x08(only forAU915,US915,Others are 0xFF)
244 244  
245 245  (% style="color:#037691" %)**BAT:**(%%) shows the battery voltage for TrackerD.
246 246  
247 -
248 248  (% style="color:#037691" %)**Ex1:**(%%) 0x0FA2 = 4002mV
249 249  
250 250  Use can also get the Device Status uplink through the downlink command:
... ... @@ -252,55 +252,48 @@
252 252  
253 253  (% style="color:#037691" %)**SMOD Field (total 1 byte)**(%%)：0x40
254 254  
255 -(% border="1.5" style="background-color:#ffffcc; color:green; width:270px" %)
256 -|=(% scope="row" style="width: 60px;" %)**Size(bit)**|(% style="width:50px" %)2bits|(% style="width:80px" %)2bit|(% style="width:80px" %)4bit
257 -|=(% style="width: 75px;" %)**Value**|(% style="width:64px" %)SMOD|(% style="width:104px" %)GPS_Settings|(% style="width:103px" %)BLE_Settings
256 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:270px" %)
257 +|(% style="width:60px" %)**Size(bit)**|(% style="width:50px" %)1 bit|(% style="width:80px" %)2 bits|(% style="width:80px" %)4 bits
258 +|(% style="width:75px" %)**Value**|(% style="width:64px" %)SMOD|(% style="width:104px" %)GPS_Settings|(% style="width:103px" %)BLE_Settings
258 258  
259 -(% style="color:blue" %)** SMOD：**
260 +(% style="color:blue" %)**SMOD：**
260 260  
261 -(% style="color:red" %)** 1 :** (%%) GPS ONLY
262 +(% style="color:red" %)**1 :** (%%) GPS ONLY
262 262  
263 -(% style="color:red" %)** 2 :** (%%) BLE ONLY
264 +(% style="color:red" %)**2 :** (%%) BLE ONLY
264 264  
265 -(% style="color:red" %)** 3 :**  (%%) GPS/BLE Hybrid
266 +(% style="color:red" %)**3 :**  (%%) GPS/BLE Hybrid
266 266  
267 267  
268 -(% style="color:blue" %)** GPS_MOD: Define how to send GPS payload**
269 +(% style="color:blue" %)**GPS_MOD: Define how to send GPS payload**
269 269  
270 -(% style="color:red" %)** 0 : ** (%%) Enable uploading on-board Temperature and humidity values
271 +(% style="color:red" %)**0 : ** (%%) Enable uploading on-board Temperature and humidity values
271 271  
272 -(% style="color:red" %)** 1 :** (%%) Disable uploading on-board Temperature and humidity values
273 +(% style="color:red" %)**1 :** (%%) Disable uploading on-board Temperature and humidity values
273 273  
274 274  
275 -(% style="color:blue" %)** BLE_Settings:**
276 +(% style="color:blue" %)**BLE_Settings:**
276 276  
277 -(% style="color:red" %)** 1: ** (%%) BLE Positioning with Strongest iBeacon
278 +(% style="color:red" %)**1: ** (%%) BLE Positioning with Strongest iBeacon
278 278  
279 -(% _mstmutation="1" style="color:red" %)** 2：**  (%%)WiFi Positioning with Strongest WiFi SSID(% _mstmutation="1" style="color:blue" %)(V1.4.1 Version support this function later)(%%)  
280 280  
281 -
282 282  (% style="color:#037691" %)**Status Field (total 1 byte)**(%%):  0x02
283 283  
284 -(% border="1.5" style="background-color:#ffffcc; color:green; width:260px" %)
285 -|=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)5 Bits|(% style="width:60px" %)1 Bit|(% style="width:20px" %)1 Bit|(% style="width:80px" %)1 Bit
286 -|=(% style="width: 77px;" %)**Value**|(% style="width:70px" %)Reserve|(% style="width:92px" %)[[PNACKMD>>||anchor="H2.4.4A0UplinkFPORT3D42CHistoryGNSSPositioning"]]|(% style="width:48px" %)[[LON>>||anchor="H3.2.5Disable2FEnableLEDflash"]]|(% style="width:126px" %)[[Transport Mode>>||anchor="H2.9TransportMode"]]
283 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:413px" %)
284 +|(% style="width:77px" %)**Size(bit)**|(% style="width:70px" %)5 Bits|(% style="width:88px" %)1 Bit|(% style="width:50px" %)1 Bit|(% style="width:128px" %)1 Bit
285 +|(% style="width:75px" %)**Value**|(% style="width:68px" %)Reserve|(% style="width:87px" %)[[PNACKMD>>||anchor="H2.4.4A0UplinkFPORT3D42CHistoryGNSSPositioning"]]|(% style="width:49px" %)[[LON>>||anchor="H3.2.5Disable2FEnableLEDflash"]]|(% style="width:126px" %)[[Transport Mode>>||anchor="H2.9TransportMode"]]
287 287  
287 +(% style="display:none" %)
288 288  
289 +
289 289  === 2.4.2 Uplink FPORT~=2, Realtime GNSS Positioning + Temperature & Humidity ===
290 290  
291 291  
292 -Users can use **AT+SMOD=1,0,0** to enable uploading on-board Temperature and humidity values, and the total payload will be 15 bytes,
293 +Users can use (% style="color:blue" %)**AT+SMOD=1,0,0**(%%) to enable uploading on-board Temperature and humidity values, and the total payload will be 15 bytes,
293 293  
294 -
295 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:320px" %)
296 -|=(% scope="row" style="width: 60px;" %)(((
297 -**Size(bytes)**
298 -)))|(% style="width:50px" %)4|(% style="width:50px" %)4|(% style="width:70px" %)2|(% style="width:30px" %)1|(% style="width:30px" %)(((
299 -2
300 -)))|(% style="width:30px" %)(((
301 -2
302 -)))
303 -|=(% style="width: 69px;" %)**Value**|(% style="width:76px" %)[[Latitude>>||anchor="HLocationinfo:"]]|(% style="width:87px" %)[[Longitude>>||anchor="HLocationinfo:"]]|(% style="width:76px" %)(((
295 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:320px" %)
296 +|(% style="width:60px" %)**Size(bytes)**|(% style="width:50px" %)4|(% style="width:50px" %)4|(% style="width:70px" %)2|(% style="width:30px" %)1|(% style="width:30px" %)2|(% style="width:30px" %)2
297 +|(% style="width:69px" %)**Value**|(% style="width:76px" %)[[Latitude>>||anchor="HLocationinfo:"]]|(% style="width:87px" %)[[Longitude>>||anchor="HLocationinfo:"]]|(% style="width:76px" %)(((
304 304  [[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
305 305  )))|(% style="width:73px" %)[[FLAG>>||anchor="HFLAG:"]]|(% style="width:40px" %)[[Hum>>||anchor="HHum:"]]|(% style="width:87px" %)[[Tem>>||anchor="HTem:"]]
306 306  
... ... @@ -309,15 +309,18 @@
309 309  
310 310  ==== (% style="color:blue" %)**Alarm & BAT:**(%%) ====
311 311  
312 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:250px" %)
313 -|=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:50px" %)1 bit|(% style="width:80px" %)1bit|(% style="width:50px" %)14bits
314 -|=(% style="width: 72px;" %)**Value**|(% style="width:67px" %)reserve|(% style="width:118px" %)Alarm Indicate|(% style="width:63px" %)[[BAT>>||anchor="HBAT:"]] 
306 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:321px" %)
307 +|(% style="width:60px" %)**Size(bit)**|(% style="width:60px" %)1 bit|(% style="width:134px" %)1 bit|(% style="width:67px" %)14 bits
308 +|(% style="width:72px" %)**Value**|(% style="width:67px" %)reserve|(% style="width:114px" %)Alarm Indicate|(% style="width:62px" %)[[BAT>>||anchor="HBAT:"]] 
315 315  
310 +(% style="display:none" %)
311 +
312 +
316 316  ==== (% style="color:blue" %)**FLAG:**(%%) ====
317 317  
318 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:120px" %)
319 -|=(% scope="row" style="width: 50px;" %)**Size(bit)**|(% style="width:30px" %)2bits|(% style="width:30px" %)1bit
320 -|=(% style="width: 79px;" %)**Value**|(% style="width:55px" %)[[MOD>>||anchor="H3.2.7SetPositioningMode"]]|(% style="width:47px" %)[[LON>>||anchor="HLON:"]]
315 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:184px" %)
316 +|(% style="width:68px" %)**Size(bit)**|(% style="width:61px" %)2 bits|(% style="width:55px" %)1 bit
317 +|(% style="width:79px" %)**Value**|(% style="width:56px" %)[[MOD>>||anchor="H3.2.7SetPositioningMode"]]|(% style="width:50px" %)[[LON>>||anchor="HLON:"]]
321 321  
322 322  **Example:** Payload: 0x02863D68 FAC29BAF 4B45 60 0202 011A 
323 323  
... ... @@ -342,7 +342,6 @@
342 342  [[image:1664502166010-515.png||_mstalt="291395"]]
343 343  
344 344  
345 -
346 346  ==== (% style="color:blue" %)**Alarm:**(%%) ====
347 347  
348 348  **Example: ** 0x4B & 0x40 >> 6 = 0x01
... ... @@ -362,6 +362,8 @@
362 362  * 3.40v ~~ 3.69v:  20% ~~ 40%
363 363  * < 3.39v:  0~~20%
364 364  
361 +(% style="display:none" %) (%%)
362 +
365 365  ==== (% style="color:blue" %)**MOD:**(%%) ====
366 366  
367 367  **Example: ** (0x60>>6) & 0x3f =1
... ... @@ -405,14 +405,12 @@
405 405  === 2.4.3  Uplink FPORT~=3, Realtime GNSS Positioning (Default Mode) ===
406 406  
407 407  
408 -The default uplink payload includes total 11 bytes (**AT+SMOD=1,1,0**). The payload is the first 11 bytes of Uplink FPORT=2, real-time GNSS positioning, (remove the temp and humidity)
406 +The default uplink payload includes total 11 bytes ((% style="color:blue" %)**AT+SMOD=1,1,0**(%%)). The payload is the first 11 bytes of Uplink FPORT=2, real-time GNSS positioning, (remove the temp and humidity)
409 409  
410 410  
411 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:300px" %)
412 -|=(% scope="row" style="width: 60px;" %)(((
413 -**Size(bytes)**
414 -)))|(% style="width:60px" %)4|(% style="width:60px" %)4|(% style="width:60px" %)2|(% style="width:50px" %)1
415 -|=(% style="width: 69px;" %)**Value**|(% style="width:76px" %)[[Latitude>>||anchor="HLocationinfo:"]]|(% style="width:87px" %)[[Longitude>>||anchor="HLocationinfo:"]]|(% style="width:76px" %)(((
409 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:300px" %)
410 +|(% style="width:60px" %)**Size(bytes)**|(% style="width:60px" %)4|(% style="width:60px" %)4|(% style="width:70px" %)2|(% style="width:50px" %)1
411 +|(% style="width:69px" %)**Value**|(% style="width:76px" %)[[Latitude>>||anchor="HLocationinfo:"]]|(% style="width:87px" %)[[Longitude>>||anchor="HLocationinfo:"]]|(% style="width:76px" %)(((
416 416  [[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
417 417  )))|(% style="width:73px" %)[[FLAG>>||anchor="HFLAG:"]]
418 418  
... ... @@ -434,11 +434,9 @@
434 434  
435 435  The payload is 15 bytes, as below.
436 436  
437 -(% border="1.5" style="background-color:#ffffcc; color:green; width:500px" %)
438 -|=(% scope="row" %)(((
439 -**Size(bytes)**
440 -)))|4|4|2|1|1|1|1|1
441 -|=**Value**|Latitude|Longitude|Year|Month|Day|Hous|Min|Sen
433 +(% border="1" style="background-color:#f2f2f2; width:500px" %)
434 +|**Size(bytes)**|4|4|2|1|1|1|1|1
435 +|**Value**|Latitude|Longitude|Year|Month|Day|Hous|Min|Sen
442 442  
443 443  [[image:image-20221009160309-2.png||_mstalt="429312"]]
444 444  
... ... @@ -451,11 +451,9 @@
451 451  User can set **[[BLEMASK>>||anchor="H3.2.11A0SetBLEMASKtofilterBLEiBeacon"]]** so TrackerD will only search the iBeacons which have UUID that match the BLEMASK settings.
452 452  
453 453  
454 -(% border="1.5" cellspacing="3" style="background-color:#ffffcc; color:green; width:450px" %)
455 -|=(% scope="row" style="width: 60px;" %)(((
456 -**Size(bytes)**
457 -)))|(% style="width:30px" %)16|(% style="width:50px" %)4|(% style="width:50px" %)4|(% style="width:120px" %)2|(% style="width:50px" %)4|(% style="width:50px" %)2|(% style="width:30px" %)1
458 -|=(% style="width: 50px;" %)**Value**|(% style="width:44px" %)[[UUID>>||anchor="HLocationinfo:"]]|(% style="width:61px" %)(((
448 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:450px" %)
449 +|(% style="width:60px" %)**Size(bytes)**|(% style="width:30px" %)16|(% style="width:50px" %)4|(% style="width:50px" %)4|(% style="width:120px" %)2|(% style="width:50px" %)4|(% style="width:50px" %)2|(% style="width:30px" %)1
450 +|(% style="width:50px" %)**Value**|(% style="width:44px" %)[[UUID>>||anchor="HLocationinfo:"]]|(% style="width:61px" %)(((
459 459  iBeacon MAJOR
460 460  )))|(% style="width:63px" %)(((
461 461  iBeacon MINOR
... ... @@ -478,46 +478,64 @@
478 478  * (% style="color:#037691" %)**Measured Power: ** (%%) The Measured Power from the strongest iBeacon.
479 479  * (% style="color:#037691" %)**RSSI:  ** (%%) The RSSI from the strongest iBeacon.
480 480  
473 +(% style="display:none" %) (%%)
481 481  
482 -=== 2.4.6  Uplink FPORT~=8, WiFi Positioning with Strongest WiFi SSID（Since firmware 1.4.1） ===
475 +=== 2.4.6  Uplink FPORT~=7, Alarm information status（Since firmware 1.4.4） ===
483 483  
484 484  
485 -TrackerD supports WiFi scans for indoor positioning. User can set [[**SMOD**>>||anchor="H3.2.7SetPositioningMode"]] to **WiFi** so TrackerD will scan WiFi and find the strongest WiFi info and uplink.
478 +The upward link device is configured to FPORT = 7. Once Trackerd alarm, it will upload the news to the server.
486 486  
480 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:284.818px" %)
481 +|(% style="width:97px" %)**Size(bytes)**|(% style="width:103px" %)2|(% style="width:81px" %)1
482 +|(% style="width:97px" %)**Value**|(% style="width:103px" %)[[Alarm & BAT>>path:#HAlarm26BAT:]]|(% style="width:81px" %)Mod+lon
487 487  
488 -(% border="1.2" cellspacing="3" style="background-color:#ffffcc; color:green; width:371.222px" %)
489 -|=(% scope="row" style="width: 60px;" %)(((
490 -**Size(bytes)**
491 -)))|(% style="width:60px" %)6|(% style="width:60px" %)4|(% style="width:79px" %)2|(% style="width:66px" %)1
492 -|=(% style="width: 69px;" %)**Value**|(% style="width:76px" %)SSID|(% style="width:87px" %)RSSI|(% style="width:79px" %)(((
493 -[[Alarm & BAT>>||anchor="HAlarm26BAT:"]]
494 -)))|(% style="width:66px" %)[[FLAG>>||anchor="HFLAG:"]]
484 + [[image:image-20230302145315-1.png]]
495 495  
496 -(% class="wikigeneratedid" %)
497 -[[image:1667288597595-714.png||_mstalt="299598" height="212" width="1151"]]
486 +**alarm**=(bytes[0] & 0x40)  ~/~/ Alarm status
498 498  
488 +**batV**=~(~(~(bytes[0] & 0x3f) <<8) | bytes[1])/1000;  ~/~/ Battery,units:V
499 499  
500 -* (% style="color:#037691" %)**BAT: ** (%%) Ex1:0x4B45 & 0x3FFF ⇒ 3901 (mV).
501 -* (% style="color:#037691" %)**SSID:      **(%%)WiFi name.
502 -* (% style="color:#037691" %)**RSSI:      **(%%)The RSSI from the strongest WiFi.
490 +**mod** = bytes[2] & 0xC0;
503 503  
492 +**Lon**=(bytes[2] & 0x20)
504 504  
505 -=== 2.4.7  Add Payload format in TTN V3 ===
506 506  
507 507  
508 -In TTN V3, user can add a custom payload so it shows friendly.
496 +=== 2.4.7  Uplink FPORT~=9, BLE Positioning with Multiple iBeacon(Since firmware 1.4.7) ===
509 509  
510 -In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**
498 +TrackerD supports BLE scanning for indoor positioning. Users can set SMOD to BLE pure or GPS/BLE Hybrid, so TrackerD will scan up to 40 BLE iBeacons and send uplinks.
511 511  
500 +User can set [[(% class="wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink wikiinternallink" %)**BLEMASK**>>path:#H3.2.11A0SetBLEMASKtofilterBLEiBeacon]](%%) so TrackerD will only search the iBeacons which have UUID that match the BLEMASK settings.
512 512  
513 -[[image:1664502649601-895.png||_mstalt="296985"]]
502 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:348px" %)
503 +|**Size(bytes)**|2|2|1|…..|2|2|1|2|1
504 +|**Value**|iBeacon MAJOR|iBeacon MINOR|iBeacon RSSI|…..|iBeacon MAJOR|iBeacon MINOR|iBeacon RSSI|[[Alarm & BAT>>path:#HAlarm26BAT:]]|[[FLAG>>path:#HFLAG:]]
514 514  
506 +(% class="wikigeneratedid" id="H" %)
507 +[[image:image-20231023103116-1.png||height="448" width="901"]]
515 515  
509 +* (% style="color:#037691" %)**BAT: ** (%%) Ex1:0x4B45 & 0x3FFF ⇒ 3901 (mV).
510 +* (% style="color:#037691" %)**MAJOR:** (%%) The MAJOR from the strongest iBeacon.
511 +* (% style="color:#037691" %)**MINOR:**  (%%)The MINOR from the strongest iBeacon.
512 +* (% style="color:#037691" %)**RSSI:  ** (%%) The RSSI from the strongest iBeacon.
516 516  
517 -Add the decoder from this link: 
514 +(% class="wikigeneratedid" %)
515 +**Note: This mode does not have a fixed decoder. Its decoder depends on the number of beacons and can be parsed according to the order of the payload.**
516 +payload format: (Major + Minor+Rssi)+(Major + Minor+Rssi)+...(Maximum forty group)...+BAT+State
518 518  
519 -[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/TrackerD>>https://github.com/dragino/dragino-end-node-decoder/tree/main/TrackerD]]
520 520  
519 +=== 2.4.8  Add Payload format in TTN V3 ===
520 +
521 +
522 +In TTN V3, user can add a custom payload so it shows friendly.
523 +
524 +In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**
525 +
526 +[[image:1664502649601-895.png||_mstalt="296985"]]
527 +
528 +
529 +Add the decoder from this link:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/TrackerD>>https://github.com/dragino/dragino-end-node-decoder/tree/main/TrackerD]]
530 +
521 521  Save the change the uplink message will be parsed. As below:
522 522  
523 523  [[image:1664502676891-606.png||_mstalt="296673"]]
... ... @@ -530,7 +530,6 @@
530 530  
531 531  Instruction is here:  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20Data%20Cake/#H7.Example~~-~~-AddTrackerDGPSTrackingInDataCake>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20Data%20Cake/#H7.Example--AddTrackerDGPSTrackingInDataCake]]
532 532  
533 -
534 534  [[image:1664502695771-538.png||_mstalt="297349"]]
535 535  
536 536  
... ... @@ -541,13 +541,53 @@
541 541  
542 542  Instruction is here: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Tago.IO/#H3.A0Example-CreateTrackerD2FLGT92positioningwidget>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Tago.IO/#H3.A0Example-CreateTrackerD2FLGT92positioningwidget]]
543 543  
544 -
545 545  [[image:1664502715371-321.png||_mstalt="292162"]]
546 546  
547 547  
548 -== 2.7  Datalog Feature ==
556 +== 2.7  Integrate with Node-red ==
549 549  
550 550  
559 +~1. Install node-red, please refer to the installation method in the link:
560 +
561 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/#H1.A0Installation>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/#H1.A0Installation]]
562 +
563 +
564 +2. Import the created flow template, please refer to the import method in the link:
565 +
566 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Node-RED/#H3.A0Importsampleflow>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/#H3.A0Importsampleflow]]
567 +
568 +
569 +The address of the flow template: [[dragino-end-node-decoder/TrackerD.json at main · dragino/dragino-end-node-decoder · GitHub>>url:https://github.com/dragino/dragino-end-node-decoder/blob/main/Node-RED/TrackerD.json]]
570 +
571 +(% style="color:red" %)**Note: If you are using NODE-RED for the first time, please search and install the two plug-ins in the figure below in node-red to fully use the flow template.**
572 +
573 +[[image:image-20230307135914-1.png||height="527" width="1045"]]
574 +
575 +
576 +[[image:image-20230307135932-2.png||height="527" width="1044"]]
577 +
578 +
579 +3. Display the map
580 + Enter the link to the map:
581 +
582 + Change its suffix to ditu：http:~/~/119.91.62.30:1880/**ditu/**
583 +
584 +**~ **[[image:image-20230308115430-1.png||height="548" width="1041"]]
585 +
586 +
587 + Hit all input in input stream
588 +
589 + [[image:image-20230308115616-2.png||height="563" width="1070"]]
590 +
591 +
592 + View map again
593 +
594 +[[image:image-20230308115701-3.png||height="571" width="1085"]]
595 +
596 +
597 +== 2.8  Datalog Feature ==
598 +
599 +
551 551  total 273 entries,by default,
552 552  
553 553  User can set [[PNACKMD=1>>||anchor="H3.2.11A0AutoSendNone-ACKmessages"]], to enable Datalog feature.
... ... @@ -560,14 +560,13 @@
560 560  [[image:image-20221009234629-1.png||_mstalt="431145" height="390" width="577"]]
561 561  
562 562  
563 -== 2.8 Alarm Mode ==
612 +== 2.9  Alarm Mode ==
564 564  
565 565  
566 566  (((
567 -User can push the (% style="color:red" %)**RED button**(%%) by more than 5 seconds to enter Alarm Mode.
616 +User can push the (% style="color:red" %)**RED button**(%%) by more than 5 seconds to enter Alarm Mode. Alarm Mode is used to send SOS info to IoT platform.
568 568  )))
569 569  
570 -
571 571  (((
572 572  Once enter Alarm mode, the (% style="color:green" %)**GREEN LED**(%%) will flash 3 times, the buzzer will alarm for 5 seconds, then TrackerD will immediately send a packet without location info and then send a data packet with GPS positioning information. After that, the device will send 60 packets at 1-minute intervals. The Alarm flag in the payload will be set for the next 60 packets unless exits alert mode.
573 573  )))
... ... @@ -585,21 +585,24 @@
585 585  )))
586 586  
587 587  
588 -== 2.9 Transport Mode ==
636 +== 2.10  Transport Mode ==
589 589  
590 590  
591 -In Transport Mode, TrackerD will check if there is motion. If there is no motion, device will send uplinks every 20 minutes. If there is motion, device will send uplink every 5 minutes.
639 +In Transport Mode, TrackerD will check if there is motion (threldhold defined by **[[PT)>>||anchor="H3.2.16GetorSetThresholdformotiondetectFF08Sincefirmware1.4.3FF09"]]** . If there is no motion, device will send uplinks every 20 minutes (Defined by **[[TDC)>>||anchor="H3.2.1SetTransmitInterval"]]** . If there is motion, device will send uplink every 5 minutes(defined by **[[MTDC)>>||anchor="H3.2.3SetTransportModePackettransmissioninterval"]]**.
592 592  
641 +When device is set in Transport Mode, it will uplink more frequenctly during moving.
642 +
593 593  * **[[MTDC>>||anchor="H3.2.3SetTransportModePackettransmissioninterval"]]** defines the Uplink Interval during transportation.
594 594  * **[[TDC>>||anchor="H3.2.1SetTransmitInterval"]]** defines the uplink interval when TrackerD is stactic.
595 595  * **[[PT>>||anchor="H3.2.16GetorSetThresholdformotiondetectFF08Sincefirmware1.4.3FF09"]]** defines the threldhold to detect a motion.
596 596  
647 +(% style="display:none" %) (%%)
597 597  
598 -== 2.10 LED Status ==
649 +== 2.11  LED Status ==
599 599  
600 600  
601 -(% border="1.5" style="background-color:#ffffcc; width:500px" %)
602 -|=(% style="width: 150px;" %)**Event**|=(% style="width: 200px;" %)**Action**|=(% style="width: 150px;" %)**AT+LON to control on/off**
652 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
653 +|=(% style="width: 150px;background-color:#D9E2F3;color:#0070C0" %)**Event**|=(% style="width: 200px;background-color:#D9E2F3;color:#0070C0" %)**Action**|=(% style="width: 150px;background-color:#D9E2F3;color:#0070C0" %)**AT+LON to control on/off**
603 603  |(% style="width:157px" %)**Power On**|(% style="width:271px" %)(% style="color:blue" %)**BLUE, **(% style="color:red" %)**RED , **(% style="color:green" %)**Green** flash once|(% style="width:202px" %)N/A
604 604  |(% style="width:157px" %)**Join request**|(% style="width:271px" %)(% style="color:green" %)**Green** (%%)led fast blink once (200ms)|(% style="width:202px" %)Yes
605 605  |(% style="width:157px" %)**Join Success**|(% style="width:271px" %)(% style="color:green" %)**Green**(%%) led on 5 second|(% style="width:202px" %)N/A
... ... @@ -612,8 +612,9 @@
612 612  |(% style="width:157px" %)**Get Downlink**|(% style="width:271px" %)(% style="color:green" %)**GREEN**(%%) led on 1 second|(% style="width:202px" %)Yes
613 613  |(% style="width:157px" %)**Movement Detect**|(% style="width:271px" %)(% style="color:red" %)**RED **(%%)led on 500ms|(% style="width:202px" %)N/A
614 614  
666 +(% style="display:none" %) (%%)
615 615  
616 -== 2.11 Button Function ==
668 +== 2.12  Button Function ==
617 617  
618 618  
619 619  (% style="color:blue" %)**RESET button:**
... ... @@ -625,17 +625,19 @@
625 625  
626 626  (% style="color:red" %)**RED button:**
627 627  
628 -[[image:1664502854406-763.png||_mstalt="295568"]]
680 +[[image:image-20230213110506-3.png]](% style="display:none" %)
629 629  
682 +(% style="display:none" %) (%%)
630 630  
631 -(% border="1" style="background-color:#ffffcc; width:510px" %)
632 -|=(% style="width: 100px;" %)**Function**|=(% style="width: 205px;" %)**Action**|=(% style="width: 205px;" %)**Description**
684 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
685 +|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 205px;background-color:#D9E2F3;color:#0070C0" %)**Action**|=(% style="width: 205px;background-color:#D9E2F3;color:#0070C0" %)**Description**
633 633  |(% style="width:135px" %)Send Alarm|(% style="width:220px" %)Keep Pressing (% style="color:red" %)**RED**(%%) button for more than 5 seconds|(% style="width:265px" %)Enter Alarm Mode.  See [[Alarm Mode>>||anchor="H2.8AlarmMode"]]
634 634  |(% style="width:135px" %)Exit Alarm Mode|(% style="width:220px" %)Fast press the (% style="color:red" %)**RED** (%%)button 10 times|(% style="width:265px" %)Exit Alarm Mode
635 635  |(% style="width:135px" %)Enter Deep Sleep Mode|(% style="width:220px" %)Press and hold the button for 10 seconds, then quickly press the device 3 times to enter deep sleep|(% style="width:265px" %)This is the mode ship out from factory. CPU will be complete in sleep mode and no LoRa activity, only use before deploy.
636 636  
690 +(% style="display:none" %) (%%)
637 637  
638 -== 2.12 USB Port Function ==
692 +== 2.13  USB Port Function ==
639 639  
640 640  
641 641  The USB interface of TrackerD has below functions:
... ... @@ -645,7 +645,18 @@
645 645  * [[Configure Device>>||anchor="H3.ConfigureTrackerDviaATcommandorLoRaWANdownlink"]]
646 646  * [[Upgrade Firmware>>||anchor="H5.UploadFirmware"]]
647 647  
702 +(% style="display:none" %) (%%)
648 648  
704 +== 2.14  Sleep Mode ==
705 +
706 +
707 +(% style="color:blue" %)**Sleep Mode:**(%%) To prevent accidental touch of the red button during transportation or assembly, so the peripherals of the device are turned off and enter deep sleep.
708 +
709 +In SLEEP mode, you need to reset by (% style="color:#037691" %)**reset button**.
710 +
711 +Use the** (% style="color:#4472c4" %)AT+SLEEP(%%)** command to put the device into sleep.
712 +
713 +
649 649  = 3. Configure TrackerD via AT command or LoRaWAN downlink =
650 650  
651 651  
... ... @@ -659,7 +659,6 @@
659 659  
660 660  TrackerD supports the AT command set in stock firmware. User can connect to TrackerD with TYPE-C cable to use AT commands as shown below.
661 661  
662 -
663 663  [[image:1664502999401-486.png||_mstalt="296985"]]
664 664  
665 665  
... ... @@ -674,6 +674,7 @@
674 674  
675 675  [[image:1664503047675-651.png||_mstalt="295386"]]
676 676  
741 +(% style="display:none" %) (%%)
677 677  
678 678  == 3.2 Command Set ==
679 679  
... ... @@ -779,7 +779,6 @@
779 779  
780 780  SMOD define how TrackerD scan and uplink data:
781 781  
782 -
783 783  * (% style="color:blue" %)**AT Command:**
784 784  
785 785  (% style="color:#037691" %)**AT+SMOD=aa,bb,cc**
... ... @@ -788,7 +788,7 @@
788 788  
789 789  * (% style="color:red" %)**1: GPS ONLY(Factory Settings):    **(%%)Only get and uplink GPS location info.
790 790  
791 -* (% style="color:red" %)**2: BLE or WiFi ONLY:                     **(%%)Only obtain iBeacon info via BLE and uplink  or obtain WiFi ssid info via WiFi and uplink. Design for Indoor tracking.
855 +* (% style="color:red" %)**2: BLE :                     **(%%)Only obtain iBeacon info via BLE and uplink. Design for Indoor tracking.
792 792  
793 793  * (% style="color:red" %)**3: GPS/BLE Hybrid:                       **(%%)Combination for Indoor and Outdoor tracking.Devices will try to search BLE iBeacon first. If device can't find the iBeacon, it will use GPS for positioning.
794 794  
... ... @@ -801,8 +801,7 @@
801 801  (% style="color:#037691" %)**cc:   **
802 802  
803 803  * (% _mstmutation="1" style="color:red" %)**1 : **(%%) (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State 
804 -
805 -* (% _mstmutation="1" style="color:red" %)**2 : **(%%) (WiFi)SSID+Rssi+BAT+State ((% _mstmutation="1" style="color:#037691" %)V1.4.1 Version support this function later(%%))  
868 +  
806 806  
807 807  (% style="color:blue" %)**Example:**
808 808  
... ... @@ -812,9 +812,8 @@
812 812  
813 813   AT+SMOD=2,0,1 ~-~->  (iBeacon)UUID+ Major + Minor+Power+Rssi+BAT+State
814 814  
815 - AT+SMOD=2,0,2 ~-~->  (WiFi)SSID+Rssi+BAT+State
878 + AT+SMOD=2,0,3  ~-~->  (iBeacon) (Major + Minor+Rssi)+(Major + Minor+Rssi)+...(Maximum forty group)...+BAT+State
816 816  
817 -
818 818  * (% style="color:blue" %)**Downlink Payload (prefix 0xA5):**
819 819  
820 820  (% style="color:#037691" %)**0xA5 01 00 00**    (%%) ~/~/  Same as AT+SMOD=1,0,0
... ... @@ -825,10 +825,8 @@
825 825  
826 826  Set max positioning time, default is 150 seconds. TrackerD will try to get location info within this period. If fail to get position data within this time, TrackerD will use 000000 for latitude and longitude.
827 827  
828 -
829 829  If **AT+FTIME=0**. The GPS module will be always powered and positioning. This will highly increase the power consumption (up to 50mA). When AT+FTIME=0, it will improve fix accuracy and shorten the acquire time for next uplink.
830 830  
831 -
832 832  * (% style="color:blue" %)**AT Command:**
833 833  
834 834  (% style="color:#037691" %)**AT+FTIME=xx**  (%%) **~-~-> ** Set to use xx as max fix time.
... ... @@ -846,10 +846,8 @@
846 846  
847 847  PDOP(Position Dilution of Precision) filter, TrackerD will only accept GPS data with a lower PDOP value than pre-configure PDOP value. If device can't get a valid GPS packet within FTIME timeout, it will use the GPS data with lowest PDOP value to server.
848 848  
849 -
850 850  A GPS packet with lower PDOP has higher accuracy. PDOP default value is 2.0
851 851  
852 -
853 853  * (% style="color:blue" %)**AT Command:**
854 854  
855 855  (% style="color:#037691" %)**AT+PDOP=2.5 ** (%%) **~-~->  ** Set PDOP to 2.5
... ... @@ -872,11 +872,11 @@
872 872  (% style="color:#037691" %)**AT+CFM=xx**
873 873  
874 874  
875 -**~ Example:**
933 +**Example:**
876 876  
877 - AT+CFM=0    **~-~->   ** Disable confirmation
935 +AT+CFM=0    **~-~->   ** Disable confirmation
878 878  
879 - AT+CFM=1    **~-~->  ** Enable confirmation
937 +AT+CFM=1    **~-~->  ** Enable confirmation
880 880  
881 881  
882 882  * (% style="color:blue" %)**Downlink Payload (prefix 0x05):**
... ... @@ -914,92 +914,167 @@
914 914  
915 915  (% style="color:blue" %)**AT Command:**
916 916  
917 - (% _mstmutation="1" style="color:#037691" %)**AT+BLEMASK=123456**   (%%) ~/~/ Set BLEMASK = 123456
975 +(% _mstmutation="1" style="color:#037691" %)**AT+BLEMASK=123456**   (%%) ~/~/ Set BLEMASK = 123456
918 918  
919 - (% _mstmutation="1" style="color:#037691" %)**AT+BLEMASK=0**  (%%) ~/~/ disable BLEMASK
977 +(% _mstmutation="1" style="color:#037691" %)**AT+BLEMASK=0**  (%%) ~/~/ disable BLEMASK
920 920  
921 -(% style="color:blue" %)**Downlink Payload: (Prefix : 0xB2)(Since firmware 1.4.1）**
979 +(% style="color:blue" %)**Downlink Payload: (Prefix : 0xB2)(Since firmware 1.4.1)**
922 922  
923 923  Example: 0xB2 01 02 03 04 05 06    ~/~/ Set BLEMASK to 123456
924 924  
925 925  
926 -=== 3.2.13  Set WiFIMASK to filter WiFi SSID（Since firmware 1.4.1） ===
984 +=== 3.2.13  Disable/Enable Information printing(Since firmware 1.4.1) ===
927 927  
928 928  
929 -WiFiMASK is to filter the unwanted WiFi SSID during scan. For example, if WiFiMASK is 123456. TrackerD will only uplink SSID info which includes 123456 as prefix. It will ignore all other WiFi which doesn’t contact 123456 in the SSID.
987 +Users can use this feature to enable/disable Information printing.
930 930  
931 -(% style="color:red" %)**Note: WiFiMASK range is 6 ~~ 10 bytes. If AT+ WiFiMASK < 6 bytes, WiFiMASK will be disabled.**
989 +(% style="color:blue" %)**AT Command:**
932 932  
991 +(% style="color:#037691" %)**AT+SHOWID=XX         **(%%) ~/~/  (Disable (0), Enable (1), default:0)
992 +\\Example: AT+SHOWID=1 ~-~-> Enable Information printing.
993 +
994 +
995 +=== 3.2.14  Get or Set Eight Channels Mode, only for us915, AU915(Since firmware 1.4.1) ===
996 +
997 +
998 +The Channels Mode in the LORAWAN LMIC library is from 0 ~~ 7. When CHE = 8, 72 channels will be accessible to the network.
999 +
933 933  (% style="color:blue" %)**AT Command:**
934 934  
935 - (% _mstmutation="1" style="color:#037691" %)**AT+WiFiMASK=123456**    (%%) ~/~/ Set WiFiMASK = 123456
1002 +(% style="color:#037691" %)**AT+CHE=1      **(%%) ~/~/ set one channels mode
936 936  
937 - (% _mstmutation="1" style="color:#037691" %)**AT+WiFiMASK=0**       (%%) ~/~/ disable WiFiMASK
938 938  
939 -(% style="color:blue" %)**Downlink Payload: (Prefix : 0xB3)(Since firmware 1.4.1）**
1005 +(% style="color:blue" %)**Downlink Payload:0X24**
940 940  
941 -Example: 0xB3 01 02 03 04 05 06    ~/~/ Set WiFiMASK to 123456
1007 +Example: 0x24 01  ~/~/ Same as AT+CHE=1
942 942  
943 943  
944 -=== 3.2.14  Disable/Enable Information printing（Since firmware 1.4.1） ===
1010 +=== 3.2.15  Get or Set Threshold for motion detect(Since firmware 1.4.3) ===
945 945  
946 946  
947 -Users can use this feature to enable/disable Information printing.
1013 +User can set the motion detect thredhold for transportation mode. The smaller the value, the more sensitivity to trigger a motion event.
948 948  
949 949  (% style="color:blue" %)**AT Command:**
950 950  
951 -(% style="color:#037691" %)**AT+SHOWID=XX         **(%%) ~/~/  (Disable (0), Enable (1), default:0)
952 -\\Example: AT+SHOWID=1 ~-~-> Enable Information printing.
1017 +(% style="color:#037691" %)**AT+PT=xx**
953 953  
1019 +Example:
954 954  
955 -=== 3.2.15  Get or Set Eight Channels Mode, only for us915, AU915（Since firmware 1.4.1） ===
1021 +AT+PT=14    ~-~->    Set to detect car motion.
956 956  
1023 +AT+PT=41  ~-~->    set to detect walk motion.
957 957  
958 -The Channels Mode in the LORAWAN LMIC library is from 0 ~~ 7. When CHE = 8, 72 channels will be accessible to the network.
959 959  
1026 +(% style="color:blue" %)**Downlink Payload:0xB4**
1027 +
1028 +0xB4 14          ~/~/  Same as AT+PT=14
1029 +
1030 +
1031 +=== 3.2.16  Set AT command window time(Since firmware 1.4.5) ===
1032 +
1033 +
1034 +AT command window time setting, customers can set the required time according to their own operation mode.The unit is second.
1035 +
960 960  (% style="color:blue" %)**AT Command:**
961 961  
962 -(% style="color:#037691" %)**AT+CHE=1      **(%%) ~/~/ set one channels mode
1038 +(% style="color:#037691" %)**AT+ATST=XX**
963 963  
1040 +Example:
964 964  
965 -(% style="color:blue" %)**Downlink Payload:0X24**
1042 +AT+ATST=15    ~-~-> Set the time to 15 seconds
966 966  
967 -Example: 0x24 01  ~/~/ Same as AT+CHE=1
1044 +(% style="color:blue" %)**Downlink Payload:0XB5**
968 968  
1046 +0xB5 0F          ~/~/  Same as AT+ATST=15
969 969  
970 -=== 3.2.16  Get or Set Threshold for motion detect（Since firmware 1.4.3） ===
971 971  
1049 +=== 3.2.17  Set the stepmeter mode(Since firmware 1.4.5) ===
972 972  
973 -User can set the motion detect thredhold for transportation mode. The smaller the value, the more sensitivity to trigger a motion event.
974 974  
1052 +After setting the step counting mode, it cannot be interrupted by motion. This mode is very power consuming. Used on some special occasions.
1053 +
975 975  (% style="color:blue" %)**AT Command:**
976 976  
977 -(% style="color:#037691" %)**AT+PT=xx**
1056 +(% style="color:#037691" %)**AT+PM=xx**
978 978  
979 - Example:
1058 +Example:
980 980  
981 - AT+PT=14    ~-~->    Set to detect car motion.
1060 +AT+PM=1    ~-~->  Turn on step counting mode
982 982  
983 - AT+PT=41  ~-~->    set to detect walk motion.
1062 +AT+PM=0    ~-~->  Turn OFF step counting mode
984 984  
1064 +(% style="color:blue" %)**Downlink Payload:0XB6**
985 985  
986 -(% style="color:blue" %)**Downlink Payload:0xB4**(%%)
987 -0xB4 14          ~/~/  Same as AT+PT=14
1066 +0xB6 01          ~/~/  Same as AT+PM=1
988 988  
989 989  
990 -= 4. Setting for Different Scenarios =
1069 +=== 3.2.18  Set down the decline detection mode(Since firmware 1.4.5) ===
991 991  
992 992  
1072 +This mode is used in conjunction with AT+PT(The recommended threshold is between 50 and 70, you need to set it according to the environment yourself). This function is used in hospitals, nursing homes, nursing homes and other places to prevent the elderly and patients from falling. No one knows.
993 993  
994 -= 5. Upload Firmware =
1074 +(% style="color:blue" %)**AT Command:**
995 995  
996 -== 5.1 Firmware Change Log ==
1076 +(% style="color:#037691" %)**AT+FD=xx**
997 997  
1078 +**Example:**
998 998  
1080 +AT+FD=1    ~-~->  Turn on the Fall detection
1081 +
1082 +AT+FD=0    ~-~->  Turn OFF the Fall detection
1083 +
1084 +(% style="color:blue" %)**Downlink Payload:0XB7**
1085 +
1086 +0xB7 01          ~/~/  Same as AT+FD=1
1087 +
1088 +
1089 +=== 3.2.19 Disable/Enable buzzer(Since firmware 1.4.6) ===
1090 +
1091 +
1092 +Disable/Enable buzzer for Alarm, downlink and uplink
1093 +
1094 +(% style="color:blue" %)**AT Command:**
1095 +
1096 +(% style="color:#037691" %)**AT+BEEP=XX**
1097 +
1098 +Example:
1099 +
1100 +AT+BEEP=1 ~-~-> Turn on the buzzer
1101 +
1102 +AT+BEEP=0 ~-~-> Turn OFF the buzzer
1103 +
1104 +(% style="color:blue" %)**Downlink Payload:0XB9**
1105 +
1106 +0xB9 01 ~/~/ Same as AT+BEEP=1
1107 +
1108 +
1109 +=== 3.2.20 Set long press time(Since firmware 1.4.6) ===
1110 +
1111 +
1112 +When using the red button Changan to alarm, press and hold the time to set 0~~10 seconds, which is convenient for use scenarios.
1113 +
1114 +(% style="color:blue" %)**AT Command:**
1115 +
1116 +(% style="color:#037691" %)**AT+EAT=XX**
1117 +
1118 +Example:
1119 +
1120 +AT+EAT=2 ~-~-> Set the long press time to 2s
1121 +
1122 +(% style="color:blue" %)**Downlink Payload:0XBA**
1123 +
1124 +0xBA 02 ~/~/ Same as AT+EAT=2
1125 +
1126 +
1127 += 4. Upload Firmware =
1128 +
1129 +== 4.1 Firmware Change Log ==
1130 +
1131 +
999 999  **[[See this link>>url:https://github.com/dragino/TrackerD]]**
1000 1000  
1001 1001  
1002 -== 5.2 How to upgrade firmware ==
1135 +== 4.2 How to upgrade firmware ==
1003 1003  
1004 1004  
1005 1005  User can use the TrackerD's USB port to upgrade firmware into it. The hardware connection for upgrade firmware is as below:
... ... @@ -1047,11 +1047,11 @@
1047 1047  [[image:image-20221207133911-7.png]]
1048 1048  
1049 1049  
1050 -= 6. Developer Guide =
1183 += 5. Developer Guide =
1051 1051  
1052 -== 6.1 Compile Source Code ==
1185 +== 5.1 Compile Source Code ==
1053 1053  
1054 -=== 6.1.1 Set up ARDUINO compile environment ===
1187 +=== 5.1.1 Set up ARDUINO compile environment ===
1055 1055  
1056 1056  
1057 1057  * **Download the latest Arduino software (IDE) from the Arduino official website:  [[https:~~/~~/www.arduino.cc/en/Main/Software>>url:https://www.arduino.cc/en/Main/Software]]**
... ... @@ -1068,7 +1068,7 @@
1068 1068  [[image:1664503715811-892.png||_mstalt="295698"]]
1069 1069  
1070 1070  
1071 -=== 6.1.2  Build the development environment ===
1204 +=== 5.1.2  Build the development environment ===
1072 1072  
1073 1073  
1074 1074  **~1. Download and install arduino IDE**
... ... @@ -1097,6 +1097,7 @@
1097 1097  (% style="color:red" %)**Note: Currently version 1.04 is almost impossible to download, you can choose version 1.03.
1098 1098  Don't quit halfway.~~! If you quit halfway, there is a high probability that it will freeze, and you will need to download again next time. (If you click to continue downloading, an error will be reported after completion)**
1099 1099  
1233 +
1100 1100  Then enter a long waiting process. If you don't want to wait, you can go to the Internet to download directly, and then import:
1101 1101  
1102 1102  (% style="color:blue" %)**Methods as below:**
... ... @@ -1144,7 +1144,7 @@
1144 1144  [[image:1664503752288-974.png||_mstalt="298194"]]
1145 1145  
1146 1146  
1147 -== 6.2 Source Code ==
1281 +== 5.2 Source Code ==
1148 1148  
1149 1149  
1150 1150  * (% style="color:blue" %)**Open the example in the TrackerD file, please select the correct port in the IDE, as shown below:**
... ... @@ -1164,23 +1164,22 @@
1164 1164  [[image:1664503824081-592.png||_mstalt="294918"]] [[image:1664503831430-500.png||_mstalt="290784"]]
1165 1165  
1166 1166  
1167 -= 7.  FAQ =
1301 += 6.  FAQ =
1168 1168  
1169 -== 7.1 How to change the LoRa Frequency Bands/Region? ==
1303 +== 6.1 How to change the LoRa Frequency Bands/Region? ==
1170 1170  
1171 1171  
1172 1172  User can follow the introduction for [[how to upgrade image>>||anchor="H5.UploadFirmware"]]. When download the images, choose the required image file for download.
1173 1173  
1174 1174  
1175 -== 7.2 What is the pin mapping for the USB program cable? ==
1309 +== 6.2 What is the pin mapping for the USB program cable? ==
1176 1176  
1177 1177  
1178 1178  [[image:1664499635206-262.png||_mstalt="295360"]]
1179 1179  
1180 1180  
1181 -
1182 -(% border="1.5" cellspacing="3" style="background-color:#ffffcc; color:green; width:314px" %)
1183 -|=(% style="width: 118px;" %)**Pin**|=(% style="width: 67px;" %)**Color**|=(% style="width: 123px;" %)**USB Pin**
1315 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:314px" %)
1316 +|=(% style="width: 120px;background-color:#D9E2F3;color:#0070C0" %)**Pin**|=(% style="width: 69px;background-color:#D9E2F3;color:#0070C0" %)**Color**|=(% style="width: 125px;background-color:#D9E2F3;color:#0070C0" %)**USB Pin**
1184 1184  |(% style="width:118px" %)A4,B4,A9,B9|(% style="width:67px" %)Red|(% style="width:123px" %)VCC
1185 1185  |(% style="width:118px" %)A7,B7|(% style="width:67px" %)White|(% style="width:123px" %)D- (N/A)
1186 1186  |(% style="width:118px" %)A6,B6|(% style="width:67px" %)Green|(% style="width:123px" %)D+(N/A)
... ... @@ -1190,12 +1190,14 @@
1190 1190  |(% style="width:118px" %)A8|(% style="width:67px" %)Yellow|(% style="width:123px" %)MTMS/GPIO14
1191 1191  |(% style="width:118px" %)B8|(% style="width:67px" %)Grey|(% style="width:123px" %)MTDO/GPIO15
1192 1192  
1326 +(% style="display:none" %) (%%)
1193 1193  
1194 -== 7.3 Notes on using different serial port tools for TrackerD ==
1195 1195  
1196 -=== 7.3.1  Serial port utility ===
1329 +== 6.3 Notes on using different serial port tools for TrackerD ==
1197 1197  
1331 +=== 6.3.1  Serial port utility ===
1198 1198  
1333 +
1199 1199  Serial port utility requires you to automatically add data streams.
1200 1200  
1201 1201  Need to adjust the data stream to RTS/CTS on physical restart.
... ... @@ -1204,13 +1204,12 @@
1204 1204  [[image:image-20221102140621-1.png||_mstalt="425672"]]
1205 1205  
1206 1206  
1207 -
1208 1208  When using AT commands, the data flow needs to be adjusted to XON/XOFF
1209 1209  
1210 1210  [[image:image-20221102140638-2.png||_mstalt="428727"]]
1211 1211  
1212 1212  
1213 -=== 7.3.2  SecureCRT ===
1347 +=== 6.3.2  SecureCRT ===
1214 1214  
1215 1215  
1216 1216  The default command window of SecureCRT is not displayed. Entering a command requires a complete input of the entire command. You can open the command window in the view.
... ... @@ -1222,7 +1222,7 @@
1222 1222  [[image:image-20221102140712-4.png||_mstalt="427089"]]
1223 1223  
1224 1224  
1225 -=== 7.3.3  PUTTY ===
1359 +=== 6.3.3  PUTTY ===
1226 1226  
1227 1227  
1228 1228  [[image:image-20221102140748-5.png||_mstalt="430456"]]
... ... @@ -1234,7 +1234,7 @@
1234 1234  [[image:image-20221102140801-6.png||_mstalt="427466"]]
1235 1235  
1236 1236  
1237 -== 7.4 How to modify source code to compile different frequency band bin file? ==
1371 +== 6.4 How to modify source code to compile different frequency band bin file? ==
1238 1238  
1239 1239  
1240 1240  (% class="box infomessage" %)
... ... @@ -1273,23 +1273,29 @@
1273 1273  [[image:image-20221116111844-5.png||_mstalt="430144" height="551" width="708"]]
1274 1274  
1275 1275  
1276 -== 7.5 Are there example python example for BLE Indoor Positioning? ==
1410 +== 6.5 Are there example python example for BLE Indoor Positioning? ==
1277 1277  
1278 1278  
1279 -[[Operating instructions for BLE indoor positioning>>doc:.Example of BLE indoor positioning python.WebHome]]
1413 +[[Operating instructions for BLE indoor positioning>>doc:Main.User Manual for LoRaWAN End Nodes.TrackerD.Example of BLE indoor positioning python.WebHome]]
1280 1280  
1281 1281  
1282 -= 8  Trouble Shooting =
1416 +== 6.6 Can alert mode and transport mode be used together? ==
1283 1283  
1284 -== 8.1  TDC is changed to 4294947296 and cause no uplink. ==
1285 1285  
1419 +Yes, you can also press the panic button to sound the alarm if set to transport mode
1286 1286  
1421 +
1422 += 7  Trouble Shooting =
1423 +
1424 +== 7.1  TDC is changed to 4294947296 and cause no uplink. ==
1425 +
1426 +
1287 1287  (((
1288 1288  Before firmware v1.4.0: When the Transport Mode is enabled ((% style="color:blue" %)**AT+INTWK=1**(%%)), the **TDC** needs to be greater than **MTDC**, otherwise, TDC setting will because 4294947296 after wakre up from motion. This bug is fixed in firmware v1.4.1
1289 1289  )))
1290 1290  
1291 1291  
1292 -== 8.2  Device not able get AT Command or show output after wake up from deep sleep mode ==
1432 +== 7.2  Device not able get AT Command or show output after wake up from deep sleep mode ==
1293 1293  
1294 1294  
1295 1295  (((
... ... @@ -1297,9 +1297,9 @@
1297 1297  )))
1298 1298  
1299 1299  
1300 -== 8.3  Problem after Upgrading Firmware ==
1440 +== 7.3  Problem after Upgrading Firmware ==
1301 1301  
1302 -=== 8.3.1 "rst: (0x3 SW_RESET)" and Continue Restart after upgrading ===
1442 +=== 7.3.1 "rst: (0x3 SW_RESET)" and Continue Restart after upgrading ===
1303 1303  
1304 1304  
1305 1305  **Error Output**
... ... @@ -1315,18 +1315,17 @@
1315 1315  )))
1316 1316  
1317 1317  
1318 -=== 8.3.2 TrackerD's led light is always GREEN on after upgrading ===
1458 +=== 7.3.2 TrackerD's led light is always GREEN on after upgrading ===
1319 1319  
1320 1320  
1321 1321  It is because the partitions are different when upgrading versions above 1.4.1, and a new partition file needs to be added. Please refer to the operation steps in chapter 8.3.1
1322 1322  
1323 1323  
1324 -=== 8.3.3 "flash read err" after upgrade firmware ===
1464 +=== 7.3.3 "flash read err" after upgrade firmware ===
1325 1325  
1326 1326  
1327 1327  Error shows below, user might erase the entire flash include u-boot partition which cause this issue.
1328 1328  
1329 -
1330 1330  [[image:image-20221122100004-1.png||_mstalt="423514" height="497" width="534"]]
1331 1331  
1332 1332  
... ... @@ -1337,12 +1337,12 @@
1337 1337   **Figure 2**
1338 1338  
1339 1339  
1340 -=== 8.3.4  "Device Key become ff ff ff ff ff ff ff ff " after upgrade firmware ===
1479 +=== 7.3.4  "Device Key become ff ff ff ff ff ff ff ff " after upgrade firmware ===
1341 1341  
1342 1342  
1343 1343  User might erase the entire flash include keys and default settings which cause this issue.
1344 1344  
1345 -After the upgrade is completed, enter **AT+CFG** as shown in the figure below.
1484 +After the upgrade is completed, enter (% style="color:blue" %)**AT+CFG**(%%) as shown in the figure below.
1346 1346  
1347 1347  
1348 1348  [[image:image-20221122100004-3.png||_mstalt="424242"]]
... ... @@ -1375,13 +1375,13 @@
1375 1375  AT+APPSKEY=dacce2299ecd97a73ee3f80b5a46a559   ( no need for OTAA)
1376 1376  
1377 1377  
1378 -== 8.4  When positioning, it will restart or the PDOP setting is unsuccessful ==
1517 +== 7.4  When positioning, it will restart or the PDOP setting is unsuccessful ==
1379 1379  
1380 1380  
1381 1381  Please download version 1.4.2 again
1382 1382  
1383 1383  
1384 -== 8.5  How to deal with unsuccessful GPS positioning? ==
1523 +== 7.5  How to deal with unsuccessful GPS positioning? ==
1385 1385  
1386 1386  
1387 1387  1） Make Sure the device is in Open Area where can see the sky.
... ... @@ -1397,7 +1397,7 @@
1397 1397  Please refer to this [[link>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/TrackerD/#H3.2.9SetPDOPvalueforGPSfixaccuracy]] on how to set up PDOP
1398 1398  
1399 1399  
1400 -== 8.6  When upgrading the firmware, the data is not completely erased, and the information does not return to normal after multiple resets ==
1539 +== 7.6  When upgrading the firmware, the data is not completely erased, and the information does not return to normal after multiple resets ==
1401 1401  
1402 1402  
1403 1403  When upgrading, use the erase button to upgrade
... ... @@ -1420,7 +1420,7 @@
1420 1420  [[image:image-20221128111443-4.png||height="432" width="546"]]
1421 1421  
1422 1422  
1423 -Use AT+FDR command to reset and then use AT+CFG to check whether the configuration is back to normal
1562 +Use (% style="color:blue" %)**AT+FDR**(%%) command to reset and then use (% style="color:blue" %)**AT+CFG**(%%) to check whether the configuration is back to normal
1424 1424  
1425 1425  [[image:image-20221128111850-5.png]]
1426 1426  
... ... @@ -1435,7 +1435,7 @@
1435 1435  [[image:image-20221128112035-7.png]]
1436 1436  
1437 1437  
1438 -== 8.7  If you encounter the following problems, please upgrade to the latest version ==
1577 +== 7.7  If you encounter the following problems, please upgrade to the latest version ==
1439 1439  
1440 1440  
1441 1441  ~1. Press and hold the red button (more than 5 seconds), and the device and server do not respond.
... ... @@ -1443,9 +1443,16 @@
1443 1443  2. Send some commands through the serial port to prompt an error (Example：AT+SMOD=1,0,1)
1444 1444  
1445 1445  
1446 -= 9.  Order Info =
1585 +== 7.8  Why when using some serial consoles, only inputting the first string port console will return "error"? ==
1447 1447  
1448 1448  
1588 +Need to enter the entire command at once, not a single character.
1589 +User can open a command window or copy the entire command to the serial console.
1590 +
1591 +
1592 += 8.  Order Info =
1593 +
1594 +
1449 1449  Part Number: (% style="color:blue" %)**TrackerD-XXX**
1450 1450  
1451 1451  (% style="color:blue" %)**XXX**(%%): The default frequency band
... ... @@ -1464,10 +1464,12 @@
1464 1464  
1465 1465  * (% style="color:red" %)**US915**(%%): Default frequency band US915
1466 1466  
1613 +(% style="display:none" %) (%%)
1467 1467  
1468 -= 10.  Packing Info =
1469 1469  
1616 += 9.  Packing Info =
1470 1470  
1618 +
1471 1471  (% style="color:#037691" %)**Package Includes**:
1472 1472  
1473 1473  * TrackerD LoRaWAN GPS/BLE Tracker x 1
... ... @@ -1480,7 +1480,9 @@
1480 1480  
1481 1481  * Weight: 50g
1482 1482  
1631 +(% style="display:none" %) (%%)
1483 1483  
1633 +
1484 1484  = 11. Support =
1485 1485  
1486 1486  
... ... @@ -1488,7 +1488,10 @@
1488 1488  
1489 1489  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:file:///D:/市场资料/说明书/LoRa/LT系列/support@dragino.com]].
1490 1490  
1641 +(% style="display:none" %)
1491 1491  
1643 +
1644 +
1492 1492  = 12.  Reference =
1493 1493  
1494 1494  
... ... @@ -1497,4 +1497,6 @@
1497 1497  * **[[Source Code>>https://github.com/dragino/TrackerD]] **
1498 1498  
1499 1499  * [[**Hardware Source**>>https://www.dropbox.com/sh/orwoy6cecb89m4e/AAD37sRuUrvKsHgAJxuVTkB5a?dl=0]]
1653 +
1654 +
1500 1500  )))
image-20230213110119-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +182.3 KB
Content
image-20230213110214-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +182.3 KB
Content
image-20230213110506-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +19.8 KB
Content
image-20230302145315-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +35.1 KB
Content
image-20230307135914-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +131.8 KB
Content
image-20230307135932-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +109.7 KB
Content
image-20230308115430-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +2.4 MB
Content
image-20230308115616-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +152.7 KB
Content
image-20230308115701-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +2.4 MB
Content
image-20230426085815-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +190.0 KB
Content
image-20231023103116-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +48.2 KB
Content