Skip to Content
Version 43.39 by Xiaoling on 2023/05/16 14:54
Hide last authors
Xiaoling 41.2 1 (% style="text-align:center" %)
2 [[image:image-20230515135611-1.jpeg||height="589" width="589"]]
Edwin Chen 2.1 3
4
5
6 **Table of Contents：**
7
8 {{toc/}}
9
10
11
12
13
14
15 = 1. Introduction =
16
Edwin Chen 5.1 17 == 1.1 What is SN50v3-LB LoRaWAN Generic Node ==
Edwin Chen 2.1 18
Xiaoling 43.2 19
Edwin Chen 4.1 20 (% style="color:blue" %)**SN50V3-LB **(%%)LoRaWAN Sensor Node is a Long Range LoRa Sensor Node. It is designed for outdoor use and powered by (% style="color:blue" %)** 8500mA Li/SOCl2 battery**(%%) for long term use.SN50V3-LB is designed to facilitate developers to quickly deploy industrial level LoRa and IoT solutions. It help users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to program, create and connect your things everywhere.
Edwin Chen 2.1 21
Edwin Chen 4.1 22 (% style="color:blue" %)**SN50V3-LB wireless part**(%%) is based on SX1262 allows the user to send data and reach extremely long ranges at low data-rates.It provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, and so on.
Edwin Chen 2.1 23
Edwin Chen 4.1 24 (% style="color:blue" %)**SN50V3-LB **(%%)has a powerful 48Mhz ARM microcontroller with 256KB flash and 64KB RAM. It has multiplex I/O pins to connect to different sensors.
Edwin Chen 2.1 25
Edwin Chen 4.1 26 (% style="color:blue" %)**SN50V3-LB**(%%) has a built-in BLE module, user can configure the sensor remotely via Mobile Phone. It also support OTA upgrade via private LoRa protocol for easy maintaining.
Edwin Chen 2.1 27
Edwin Chen 4.1 28 SN50V3-LB is the 3^^rd^^ generation of LSN50 series generic sensor node from Dragino. It is an (% style="color:blue" %)**open source project**(%%) and has a mature LoRaWAN stack and application software. User can use the pre-load software for their IoT projects or easily customize the software for different requirements.
Edwin Chen 2.1 29
Edwin Chen 4.1 30
Edwin Chen 2.1 31 == 1.2 ​Features ==
32
33 * LoRaWAN 1.0.3 Class A
34 * Ultra-low power consumption
Edwin Chen 5.1 35 * Open-Source hardware/software
Edwin Chen 2.1 36 * Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
37 * Support Bluetooth v5.1 and LoRaWAN remote configure
38 * Support wireless OTA update firmware
39 * Uplink on periodically
40 * Downlink to change configure
41 * 8500mAh Battery for long term use
42
43 == 1.3 Specification ==
44
Xiaoling 43.4 45
Edwin Chen 2.1 46 (% style="color:#037691" %)**Common DC Characteristics:**
47
48 * Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
49 * Operating Temperature: -40 ~~ 85°C
50
Edwin Chen 5.1 51 (% style="color:#037691" %)**I/O Interface:**
Edwin Chen 2.1 52
Edwin Chen 5.1 53 * Battery output (2.6v ~~ 3.6v depends on battery)
54 * +5v controllable output
55 * 3 x Interrupt or Digital IN/OUT pins
56 * 3 x one-wire interfaces
57 * 1 x UART Interface
58 * 1 x I2C Interface
Edwin Chen 2.1 59
60 (% style="color:#037691" %)**LoRa Spec:**
61
62 * Frequency Range,  Band 1 (HF): 862 ~~ 1020 Mhz
63 * Max +22 dBm constant RF output vs.
64 * RX sensitivity: down to -139 dBm.
65 * Excellent blocking immunity
66
67 (% style="color:#037691" %)**Battery:**
68
69 * Li/SOCI2 un-chargeable battery
70 * Capacity: 8500mAh
71 * Self-Discharge: <1% / Year @ 25°C
72 * Max continuously current: 130mA
73 * Max boost current: 2A, 1 second
74
75 (% style="color:#037691" %)**Power Consumption**
76
77 * Sleep Mode: 5uA @ 3.3v
78 * LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
79
80 == 1.4 Sleep mode and working mode ==
81
Xiaoling 43.4 82
Edwin Chen 2.1 83 (% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
84
85 (% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
86
87
88 == 1.5 Button & LEDs ==
89
90
91 [[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675071855856-879.png]]
92
93
94 (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
95 |=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 225px;background-color:#D9E2F3;color:#0070C0" %)**Action**
96 |(% style="width:167px" %)Pressing ACT between 1s < time < 3s|(% style="width:117px" %)Send an uplink|(% style="width:225px" %)(((
97 If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.
98 Meanwhile, BLE module will be active and user can connect via BLE to configure device.
99 )))
100 |(% style="width:167px" %)Pressing ACT for more than 3s|(% style="width:117px" %)Active Device|(% style="width:225px" %)(((
101 (% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network.
102 (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
103 Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device join or not join LoRaWAN network.
104 )))
105 |(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
106
107 == 1.6 BLE connection ==
108
109
Edwin Chen 5.1 110 SN50v3-LB supports BLE remote configure.
Edwin Chen 2.1 111
112
113 BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
114
115 * Press button to send an uplink
116 * Press button to active device.
117 * Device Power on or reset.
118
119 If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
120
121
Edwin Chen 6.1 122 == 1.7 Pin Definitions ==
Edwin Chen 2.1 123
124
Saxer Lin 36.1 125 [[image:image-20230513102034-2.png]]
Edwin Chen 2.1 126
127
128 == 1.8 Mechanical ==
129
130
131 [[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
132
133 [[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143899218-599.png]]
134
135 [[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
136
137
Edwin Chen 5.1 138 == Hole Option ==
139
Xiaoling 43.4 140
Edwin Chen 5.1 141 SN50v3-LB has different hole size options for different size sensor cable. The options provided are M12, M16 and M20. The definition is as below:
142
143 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220627104757-1.png?rev=1.1||alt="image-20220627104757-1.png"]]
144
145 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656298089706-973.png?rev=1.1||alt="1656298089706-973.png"]]
146
147
Edwin Chen 10.1 148 = 2. Configure SN50v3-LB to connect to LoRaWAN network =
Edwin Chen 2.1 149
150 == 2.1 How it works ==
151
152
Edwin Chen 11.2 153 The SN50v3-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the S31x-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
Edwin Chen 2.1 154
155
156 == 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
157
158
159 Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
160
161 The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
162
163
Edwin Chen 11.2 164 (% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from SN50v3-LB.
Edwin Chen 2.1 165
Edwin Chen 11.2 166 Each SN50v3-LB is shipped with a sticker with the default device EUI as below:
Edwin Chen 2.1 167
Edwin Chen 11.2 168 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/S31-LB_S31B-LB/WebHome/image-20230426084152-1.png?width=502&height=233&rev=1.1||alt="图片-20230426084152-1.png" height="233" width="502"]]
Edwin Chen 2.1 169
170
171 You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
172
173
174 (% style="color:blue" %)**Register the device**
175
176 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/1654935135620-998.png?rev=1.1||alt="1654935135620-998.png"]]
177
178
179 (% style="color:blue" %)**Add APP EUI and DEV EUI**
180
181 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-4.png?width=753&height=551&rev=1.1||alt="图片-20220611161308-4.png"]]
182
183
184 (% style="color:blue" %)**Add APP EUI in the application**
185
186
187 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-5.png?width=742&height=601&rev=1.1||alt="图片-20220611161308-5.png"]]
188
189
190 (% style="color:blue" %)**Add APP KEY**
191
192 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
193
194
Edwin Chen 11.2 195 (% style="color:blue" %)**Step 2:**(%%) Activate SN50v3-LB
Edwin Chen 2.1 196
197
Edwin Chen 11.2 198 Press the button for 5 seconds to activate the SN50v3-LB.
Edwin Chen 2.1 199
200 (% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
201
202 After join success, it will start to upload messages to TTN and you can see the messages in the panel.
203
204
205 == 2.3 ​Uplink Payload ==
206
207 === 2.3.1 Device Status, FPORT~=5 ===
208
209
Edwin Chen 11.2 210 Users can use the downlink command(**0x26 01**) to ask SN50v3 to send device configure detail, include device configure status. SN50v3 will uplink a payload via FPort=5 to server.
Edwin Chen 2.1 211
212 The Payload format is as below.
213
214
215 (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
216 |(% colspan="6" style="background-color:#d9e2f3; color:#0070c0" %)**Device Status (FPORT=5)**
217 |(% style="width:103px" %)**Size (bytes)**|(% style="width:72px" %)**1**|**2**|(% style="width:91px" %)**1**|(% style="width:86px" %)**1**|(% style="width:44px" %)**2**
218 |(% style="width:103px" %)**Value**|(% style="width:72px" %)Sensor Model|Firmware Version|(% style="width:91px" %)Frequency Band|(% style="width:86px" %)Sub-band|(% style="width:44px" %)BAT
219
220 Example parse in TTNv3
221
222
Edwin Chen 11.2 223 (% style="color:#037691" %)**Sensor Model**(%%): For SN50v3, this value is 0x1C
Edwin Chen 2.1 224
225 (% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
226
227 (% style="color:#037691" %)**Frequency Band**:
228
229 *0x01: EU868
230
231 *0x02: US915
232
233 *0x03: IN865
234
235 *0x04: AU915
236
237 *0x05: KZ865
238
239 *0x06: RU864
240
241 *0x07: AS923
242
243 *0x08: AS923-1
244
245 *0x09: AS923-2
246
247 *0x0a: AS923-3
248
249 *0x0b: CN470
250
251 *0x0c: EU433
252
253 *0x0d: KR920
254
255 *0x0e: MA869
256
257
258 (% style="color:#037691" %)**Sub-Band**:
259
260 AU915 and US915:value 0x00 ~~ 0x08
261
262 CN470: value 0x0B ~~ 0x0C
263
264 Other Bands: Always 0x00
265
266
267 (% style="color:#037691" %)**Battery Info**:
268
269 Check the battery voltage.
270
271 Ex1: 0x0B45 = 2885mV
272
273 Ex2: 0x0B49 = 2889mV
274
275
Edwin Chen 12.1 276 === 2.3.2 Working Modes & Sensor Data. Uplink via FPORT~=2 ===
Edwin Chen 2.1 277
278
Edwin Chen 12.1 279 SN50v3 has different working mode for the connections of different type of sensors. This section describes these modes. Use can use the AT Command AT+MOD to set SN50v3 to different working modes.
280
281 For example:
282
283 **AT+MOD=2  ** ~/~/ will set the SN50v3 to work in MOD=2 distance mode which target to measure distance via Ultrasonic Sensor.
284
285
Edwin Chen 13.1 286 (% style="color:red" %) **Important Notice:**
Edwin Chen 12.1 287
288 1. Some working modes has payload more than 12 bytes, The US915/AU915/AS923 frequency bands' definition has maximum 11 bytes in **DR0**. Server sides will see NULL payload while SN50v3 transmit in DR0 with 12 bytes payload.
Edwin Chen 13.1 289 1. All modes share the same Payload Explanation from HERE.
290 1. By default, the device will send an uplink message every 20 minutes.
Edwin Chen 12.1 291
Edwin Chen 13.1 292 ==== 2.3.2.1  MOD~=1 (Default Mode) ====
Edwin Chen 12.1 293
Xiaoling 43.5 294
Edwin Chen 12.1 295 In this mode, uplink payload includes in total 11 bytes. Uplink packets use FPORT=2.
296
Xiaoling 43.5 297 (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
Xiaoling 43.18 298 |(% style="width:50px;background-color:#D9E2F3;color:#0070C0" %)**Size(bytes)**|(% style="width:20px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:100px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:40px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:90px;background-color:#D9E2F3;color:#0070C0" %)**1**|(% style="width:130px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:90px;background-color:#D9E2F3;color:#0070C0" %)**2**
Saxer Lin 40.1 299 |**Value**|Bat|(% style="width:191px" %)(((
Xiaoling 43.12 300 Temperature(DS18B20)(PC13)
Saxer Lin 40.1 301 )))|(% style="width:78px" %)(((
Xiaoling 43.12 302 ADC(PA4)
Saxer Lin 26.2 303 )))|(% style="width:216px" %)(((
Xiaoling 43.13 304 Digital in(PB15)&Digital Interrupt(PA8)
Saxer Lin 40.1 305 )))|(% style="width:308px" %)(((
Xiaoling 43.12 306 Temperature(SHT20 or SHT31 or BH1750 Illumination Sensor)
Saxer Lin 40.1 307 )))|(% style="width:154px" %)(((
Xiaoling 43.12 308 Humidity(SHT20 or SHT31)
Saxer Lin 36.1 309 )))
310
Edwin Chen 12.1 311 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220627150949-6.png?rev=1.1||alt="image-20220627150949-6.png"]]
312
313
Edwin Chen 13.1 314 ==== 2.3.2.2  MOD~=2 (Distance Mode) ====
315
Edwin Chen 12.1 316 This mode is target to measure the distance. The payload of this mode is totally 11 bytes. The 8^^th^^ and 9^^th^^ bytes is for the distance.
317
Xiaoling 43.14 318 (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
Xiaoling 43.15 319 |(% style="width:40px;background-color:#D9E2F3;color:#0070C0" %)**Size(bytes)**|(% style="width:40px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:110px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:40px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:110px;background-color:#D9E2F3;color:#0070C0" %)**1**|(% style="width:140px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:40px;background-color:#D9E2F3;color:#0070C0" %)**2**
Saxer Lin 40.1 320 |**Value**|BAT|(% style="width:196px" %)(((
Xiaoling 43.16 321 Temperature(DS18B20)(PC13)
Saxer Lin 40.1 322 )))|(% style="width:87px" %)(((
Xiaoling 43.16 323 ADC(PA4)
Saxer Lin 40.1 324 )))|(% style="width:189px" %)(((
Xiaoling 43.16 325 Digital in(PB15) & Digital Interrupt(PA8)
Saxer Lin 40.1 326 )))|(% style="width:208px" %)(((
Xiaoling 43.16 327 Distance measure by:1) LIDAR-Lite V3HP
328 Or 2) Ultrasonic Sensor
Saxer Lin 40.1 329 )))|(% style="width:117px" %)Reserved
Edwin Chen 12.1 330
331 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656324539647-568.png?rev=1.1||alt="1656324539647-568.png"]]
332
Xiaoling 43.17 333 (% style="color:blue" %)**Connection of LIDAR-Lite V3HP:**
Edwin Chen 12.1 334
Saxer Lin 26.2 335 [[image:image-20230512173758-5.png||height="563" width="712"]]
Edwin Chen 12.1 336
Xiaoling 43.17 337 (% style="color:blue" %)**Connection to Ultrasonic Sensor:**
Edwin Chen 12.1 338
Saxer Lin 36.1 339 Need to remove R1 and R2 resistors to get low power,otherwise there will be 240uA standby current.
340
Saxer Lin 26.2 341 [[image:image-20230512173903-6.png||height="596" width="715"]]
Edwin Chen 12.1 342
343 For the connection to TF-Mini or TF-Luna , MOD2 payload is as below:
344
Xiaoling 43.19 345 (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
Xiaoling 43.21 346 |(% style="width:50px;background-color:#D9E2F3;color:#0070C0" %)**Size(bytes)**|(% style="width:20px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:100px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:100px;background-color:#D9E2F3;color:#0070C0" %)**1**|(% style="width:50px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:120px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:80px;background-color:#D9E2F3;color:#0070C0" %)**2**
Saxer Lin 40.1 347 |**Value**|BAT|(% style="width:183px" %)(((
Xiaoling 43.19 348 Temperature(DS18B20)(PC13)
Saxer Lin 40.1 349 )))|(% style="width:173px" %)(((
Xiaoling 43.19 350 Digital in(PB15) & Digital Interrupt(PA8)
Saxer Lin 40.1 351 )))|(% style="width:84px" %)(((
Xiaoling 43.19 352 ADC(PA4)
Saxer Lin 40.1 353 )))|(% style="width:323px" %)(((
Edwin Chen 12.1 354 Distance measure by:1)TF-Mini plus LiDAR
Xiaoling 43.22 355 Or 
356 2) TF-Luna LiDAR
Saxer Lin 40.1 357 )))|(% style="width:188px" %)Distance signal  strength
Edwin Chen 12.1 358
359 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656376779088-686.png?rev=1.1||alt="1656376779088-686.png"]]
360
361 **Connection to [[TF-Mini plus>>url:http://en.benewake.com/product/detail/5c345cd0e5b3a844c472329b.html]] LiDAR(UART version):**
362
Saxer Lin 36.1 363 Need to remove R3 and R4 resistors to get low power,otherwise there will be 400uA standby current.
Edwin Chen 12.1 364
Saxer Lin 26.2 365 [[image:image-20230512180609-7.png||height="555" width="802"]]
Edwin Chen 12.1 366
367 **Connection to [[TF-Luna>>url:http://en.benewake.com/product/detail/5e1c1fd04d839408076b6255.html]] LiDAR (UART version):**
368
Saxer Lin 36.1 369 Need to remove R3 and R4 resistors to get low power,otherwise there will be 400uA standby current.
Edwin Chen 12.1 370
Saxer Lin 36.1 371 [[image:image-20230513105207-4.png||height="469" width="802"]]
Edwin Chen 12.1 372
373
Edwin Chen 13.1 374 ==== 2.3.2.3  MOD~=3 (3 ADC + I2C) ====
375
Edwin Chen 12.1 376 This mode has total 12 bytes. Include 3 x ADC + 1x I2C
377
Xiaoling 43.21 378 (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
Xiaoling 43.25 379 |=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
380 **Size(bytes)**
Xiaoling 43.24 381 )))|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 140px;background-color:#D9E2F3;color:#0070C0" %)2|=(% style="width: 120px;background-color:#D9E2F3;color:#0070C0" %)2|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)1
Saxer Lin 26.2 382 |**Value**|(% style="width:68px" %)(((
Xiaoling 43.23 383 ADC1(PA4)
Saxer Lin 26.2 384 )))|(% style="width:75px" %)(((
Xiaoling 43.23 385 ADC2(PA5)
Saxer Lin 36.1 386 )))|(((
Xiaoling 43.23 387 ADC3(PA8)
Saxer Lin 36.1 388 )))|(((
389 Digital Interrupt(PB15)
390 )))|(% style="width:304px" %)(((
Xiaoling 43.23 391 Temperature(SHT20 or SHT31 or BH1750 Illumination Sensor)
Saxer Lin 36.1 392 )))|(% style="width:163px" %)(((
Xiaoling 43.23 393 Humidity(SHT20 or SHT31)
Saxer Lin 36.1 394 )))|(% style="width:53px" %)Bat
395
396 [[image:image-20230513110214-6.png]]
397
398
Edwin Chen 13.1 399 ==== 2.3.2.4 MOD~=4 (3 x DS18B20) ====
400
Edwin Chen 12.1 401
Saxer Lin 26.2 402 This mode has total 11 bytes. As shown below:
Edwin Chen 12.1 403
Xiaoling 43.26 404 (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
405 |(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**Size(bytes)**|(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**1**|(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**2**
Saxer Lin 26.2 406 |**Value**|BAT|(% style="width:186px" %)(((
Xiaoling 43.27 407 Temperature1(DS18B20)(PC13)
Saxer Lin 26.2 408 )))|(% style="width:82px" %)(((
Xiaoling 43.27 409 ADC(PA4)
Saxer Lin 26.2 410 )))|(% style="width:210px" %)(((
Xiaoling 43.27 411 Digital in(PB15) & Digital Interrupt(PA8) 
Saxer Lin 26.2 412 )))|(% style="width:191px" %)Temperature2(DS18B20)
Xiaoling 43.27 413 (PB9)|(% style="width:183px" %)Temperature3(DS18B20)(PB8)
Edwin Chen 12.1 414
415 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656377606181-607.png?rev=1.1||alt="1656377606181-607.png"]]
416
Saxer Lin 39.2 417 [[image:image-20230513134006-1.png||height="559" width="736"]]
Edwin Chen 12.1 418
Saxer Lin 39.1 419
Edwin Chen 13.1 420 ==== 2.3.2.5  MOD~=5(Weight Measurement by HX711) ====
421
Saxer Lin 26.2 422 [[image:image-20230512164658-2.png||height="532" width="729"]]
Edwin Chen 12.1 423
424 Each HX711 need to be calibrated before used. User need to do below two steps:
425
426 1. Zero calibration. Don't put anything on load cell and run **AT+WEIGRE** to calibrate to Zero gram.
427 1. Adjust calibration factor (default value 400): Put a known weight thing on load cell and run **AT+WEIGAP** to adjust the Calibration Factor.
428 1. (((
Saxer Lin 26.2 429 Weight has 4 bytes, the unit is g.
Edwin Chen 12.1 430 )))
431
432 For example:
433
Saxer Lin 26.2 434 **AT+GETSENSORVALUE =0**
Edwin Chen 12.1 435
436 Response:  Weight is 401 g
437
438 Check the response of this command and adjust the value to match the real value for thing.
439
Xiaoling 43.29 440 (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
441 |=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
Edwin Chen 12.1 442 **Size(bytes)**
Xiaoling 43.30 443 )))|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 150px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 200px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**4**
Saxer Lin 40.1 444 |**Value**|BAT|(% style="width:193px" %)(((
Saxer Lin 36.1 445 Temperature(DS18B20)
Saxer Lin 26.2 446 (PC13)
Saxer Lin 40.1 447 )))|(% style="width:85px" %)(((
Xiaoling 43.31 448 ADC(PA4)
Saxer Lin 40.1 449 )))|(% style="width:186px" %)(((
Saxer Lin 36.1 450 Digital in(PB15) &
451 Digital Interrupt(PA8)
Saxer Lin 40.1 452 )))|(% style="width:100px" %)Weight
Saxer Lin 26.2 453
Edwin Chen 12.1 454 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220820120036-2.png?width=1003&height=469&rev=1.1||alt="image-20220820120036-2.png" height="469" width="1003"]]
455
456
Edwin Chen 13.1 457 ==== 2.3.2.6  MOD~=6 (Counting Mode) ====
458
Edwin Chen 12.1 459 In this mode, the device will work in counting mode. It counts the interrupt on the interrupt pins and sends the count on TDC time.
460
461 Connection is as below. The PIR sensor is a count sensor, it will generate interrupt when people come close or go away. User can replace the PIR sensor with other counting sensors.
462
Saxer Lin 26.2 463 [[image:image-20230512181814-9.png||height="543" width="697"]]
Edwin Chen 12.1 464
Xiaoling 43.31 465 (% style="color:red" %)**Note:** LoRaWAN wireless transmission will infect the PIR sensor. Which cause the counting value increase +1 for every uplink. User can change PIR sensor or put sensor away of the SN50_v3 to avoid this happen.
Edwin Chen 12.1 466
Xiaoling 43.38 467 (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
Xiaoling 43.32 468 |=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**Size(bytes)**|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 220px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 80px;background-color:#D9E2F3;color:#0070C0" %)**4**
Saxer Lin 36.1 469 |**Value**|BAT|(% style="width:256px" %)(((
Xiaoling 43.31 470 Temperature(DS18B20)(PC13)
Saxer Lin 36.1 471 )))|(% style="width:108px" %)(((
Xiaoling 43.31 472 ADC(PA4)
Saxer Lin 36.1 473 )))|(% style="width:126px" %)(((
Xiaoling 43.31 474 Digital in(PB15)
Saxer Lin 36.1 475 )))|(% style="width:145px" %)(((
Xiaoling 43.31 476 Count(PA8)
Saxer Lin 36.1 477 )))
478
Edwin Chen 12.1 479 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656378441509-171.png?rev=1.1||alt="1656378441509-171.png"]]
480
481
Edwin Chen 13.1 482 ==== 2.3.2.7  MOD~=7 (Three interrupt contact modes) ====
483
Xiaoling 43.38 484 (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
Xiaoling 43.33 485 |=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
Edwin Chen 12.1 486 **Size(bytes)**
Xiaoling 43.34 487 )))|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)1|=(% style="width: 40px;background-color:#D9E2F3;color:#0070C0" %)2
Saxer Lin 40.1 488 |**Value**|BAT|(% style="width:188px" %)(((
Saxer Lin 36.1 489 Temperature(DS18B20)
490 (PC13)
Saxer Lin 40.1 491 )))|(% style="width:83px" %)(((
Xiaoling 43.35 492 ADC(PA5)
Saxer Lin 40.1 493 )))|(% style="width:184px" %)(((
Saxer Lin 36.1 494 Digital Interrupt1(PA8)
Saxer Lin 40.1 495 )))|(% style="width:186px" %)Digital Interrupt2(PA4)|(% style="width:197px" %)Digital Interrupt3(PB15)|(% style="width:100px" %)Reserved
Saxer Lin 36.1 496
497 [[image:image-20230513111203-7.png||height="324" width="975"]]
498
Edwin Chen 13.1 499 ==== 2.3.2.8  MOD~=8 （3ADC+1DS18B20） ====
500
Xiaoling 43.38 501 (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
Xiaoling 43.35 502 |=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
Edwin Chen 12.1 503 **Size(bytes)**
Xiaoling 43.37 504 )))|=(% style="width: 30px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 120px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 70px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 120px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 70px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 70px;background-color:#D9E2F3;color:#0070C0" %)2
Saxer Lin 36.1 505 |**Value**|BAT|(% style="width:207px" %)(((
506 Temperature(DS18B20)
507 (PC13)
508 )))|(% style="width:94px" %)(((
Xiaoling 43.36 509 ADC1(PA4)
Saxer Lin 36.1 510 )))|(% style="width:198px" %)(((
511 Digital Interrupt(PB15)
512 )))|(% style="width:84px" %)(((
Xiaoling 43.36 513 ADC2(PA5)
Saxer Lin 40.1 514 )))|(% style="width:82px" %)(((
Xiaoling 43.36 515 ADC3(PA8)
Edwin Chen 12.1 516 )))
517
Saxer Lin 36.1 518 [[image:image-20230513111231-8.png||height="335" width="900"]]
Edwin Chen 12.1 519
520
Edwin Chen 13.1 521 ==== 2.3.2.9  MOD~=9 (3DS18B20+ two Interrupt count mode) ====
522
Xiaoling 43.38 523 (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
524 |=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
Edwin Chen 12.1 525 **Size(bytes)**
Xiaoling 43.39 526 )))|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 80px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)4|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)4
Edwin Chen 12.1 527 |**Value**|BAT|(((
Saxer Lin 36.1 528 Temperature1(DS18B20)
529 (PC13)
Edwin Chen 12.1 530 )))|(((
Saxer Lin 36.1 531 Temperature2(DS18B20)
532 (PB9)
Edwin Chen 12.1 533 )))|(((
Saxer Lin 36.1 534 Digital Interrupt
535 (PB15)
536 )))|(% style="width:193px" %)(((
537 Temperature3(DS18B20)
538 (PB8)
539 )))|(% style="width:78px" %)(((
Xiaoling 43.39 540 Count1(PA8)
Saxer Lin 36.1 541 )))|(% style="width:78px" %)(((
Xiaoling 43.39 542 Count2(PA4)
Edwin Chen 12.1 543 )))
544
Saxer Lin 36.1 545 [[image:image-20230513111255-9.png||height="341" width="899"]]
Edwin Chen 12.1 546
547 **The newly added AT command is issued correspondingly:**
548
Saxer Lin 36.1 549 **~ AT+INTMOD1** ** PA8**  pin：  Corresponding downlink:  **06 00 00 xx**
Edwin Chen 12.1 550
Saxer Lin 36.1 551 **~ AT+INTMOD2**  **PA4**  pin：  Corresponding downlink:**  06 00 01 xx**
Edwin Chen 12.1 552
Saxer Lin 36.1 553 **~ AT+INTMOD3**  **PB15**  pin：  Corresponding downlink:  ** 06 00 02 xx**
Edwin Chen 12.1 554
555 **AT+SETCNT=aa,bb** 
556
Saxer Lin 36.1 557 When AA is 1, set the count of PA8 pin to BB Corresponding downlink：09 01 bb bb bb bb
Edwin Chen 12.1 558
Saxer Lin 36.1 559 When AA is 2, set the count of PA4 pin to BB Corresponding downlink：09 02 bb bb bb bb
Edwin Chen 12.1 560
561
Edwin Chen 14.1 562
563 === 2.3.3  ​Decode payload ===
564
Edwin Chen 12.1 565 While using TTN V3 network, you can add the payload format to decode the payload.
566
567 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656378466788-734.png?rev=1.1||alt="1656378466788-734.png"]]
568
569 The payload decoder function for TTN V3 are here:
570
Edwin Chen 14.1 571 SN50v3 TTN V3 Payload Decoder:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>url:https://github.com/dragino/dragino-end-node-decoder]]
Edwin Chen 12.1 572
573
Edwin Chen 14.1 574 ==== 2.3.3.1 Battery Info ====
Edwin Chen 2.1 575
Edwin Chen 14.1 576 Check the battery voltage for SN50v3.
Edwin Chen 2.1 577
578 Ex1: 0x0B45 = 2885mV
579
580 Ex2: 0x0B49 = 2889mV
581
582
Edwin Chen 14.1 583 ==== 2.3.3.2  Temperature (DS18B20) ====
Edwin Chen 2.1 584
Saxer Lin 42.1 585 If there is a DS18B20 connected to PC13 pin. The temperature will be uploaded in the payload.
Edwin Chen 2.1 586
Edwin Chen 14.1 587 More DS18B20 can check the [[3 DS18B20 mode>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#2.3.4MOD3D4283xDS18B2029]]
588
589 **Connection:**
590
Saxer Lin 26.2 591 [[image:image-20230512180718-8.png||height="538" width="647"]]
Edwin Chen 14.1 592
Edwin Chen 2.1 593 **Example**:
594
595 If payload is: 0105H:  (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
596
597 If payload is: FF3FH :  (FF3F & 8000 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
598
599 （FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
600
601
Edwin Chen 14.1 602 ==== 2.3.3.3 Digital Input ====
Edwin Chen 2.1 603
Saxer Lin 26.2 604 The digital input for pin PB15,
Edwin Chen 2.1 605
Saxer Lin 26.2 606 * When PB15 is high, the bit 1 of payload byte 6 is 1.
607 * When PB15 is low, the bit 1 of payload byte 6 is 0.
Edwin Chen 2.1 608
Saxer Lin 26.2 609 (% class="wikigeneratedid" id="H2.3.3.4A0AnalogueDigitalConverter28ADC29" %)
610 (((
Saxer Lin 36.1 611 When the digital interrupt pin is set to AT+INTMODx=0, this pin is used as a digital input pin.
612
Xiaoling 43.8 613 (% style="color:red" %)**Note:**The maximum voltage input supports 3.6V.
Saxer Lin 26.2 614 )))
615
Edwin Chen 14.1 616 ==== 2.3.3.4  Analogue Digital Converter (ADC) ====
Edwin Chen 2.1 617
Saxer Lin 36.1 618 The measuring range of the ADC is only about 0V to 1.1V The voltage resolution is about 0.24mv.
Edwin Chen 2.1 619
Saxer Lin 36.1 620 When the measured output voltage of the sensor is not within the range of 0V and 1.1V, the output voltage terminal of the sensor shall be divided The example in the following figure is to reduce the output voltage of the sensor by three times If it is necessary to reduce more times, calculate according to the formula in the figure and connect the corresponding resistance in series.
Edwin Chen 14.1 621
Saxer Lin 26.2 622 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220628150112-1.png?width=285&height=241&rev=1.1||alt="image-20220628150112-1.png" height="241" width="285"]]
Edwin Chen 14.1 623
Xiaoling 43.8 624 (% style="color:red" %)**Note:**If the ADC type sensor needs to be powered by SN50_v3, it is recommended to use +5V to control its switch.Only sensors with low power consumption can be powered with VDD.
Edwin Chen 14.1 625
Saxer Lin 43.1 626
Edwin Chen 14.1 627 ==== 2.3.3.5 Digital Interrupt ====
628
Saxer Lin 36.1 629 Digital Interrupt refers to pin PA8, and there are different trigger methods. When there is a trigger, the SN50v3 will send a packet to the server.
Edwin Chen 14.1 630
Xiaoling 43.8 631 (% style="color:blue" %)**~ Interrupt connection method:**
Edwin Chen 14.1 632
Saxer Lin 36.1 633 [[image:image-20230513105351-5.png||height="147" width="485"]]
Edwin Chen 14.1 634
Xiaoling 43.8 635 (% style="color:blue" %)**Example to use with door sensor :**
Edwin Chen 14.1 636
637 The door sensor is shown at right. It is a two wire magnetic contact switch used for detecting the open/close status of doors or windows.
638
639 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379210849-860.png?rev=1.1||alt="1656379210849-860.png"]]
640
Saxer Lin 36.1 641 When the two pieces are close to each other, the 2 wire output will be short or open (depending on the type), while if the two pieces are away from each other, the 2 wire output will be the opposite status. So we can use SN50_v3 interrupt interface to detect the status for the door or window.
Edwin Chen 14.1 642
Xiaoling 43.8 643 (% style="color:blue" %)**~ Below is the installation example:**
Edwin Chen 14.1 644
Saxer Lin 36.1 645 Fix one piece of the magnetic sensor to the door and connect the two pins to SN50_v3 as follows:
Edwin Chen 14.1 646
647 * (((
Saxer Lin 36.1 648 One pin to SN50_v3's PA8 pin
Edwin Chen 14.1 649 )))
650 * (((
Saxer Lin 36.1 651 The other pin to SN50_v3's VDD pin
Edwin Chen 14.1 652 )))
653
Saxer Lin 36.1 654 Install the other piece to the door. Find a place where the two pieces will be close to each other when the door is closed. For this particular magnetic sensor, when the door is closed, the output will be short, and PA8 will be at the VCC voltage.
Edwin Chen 14.1 655
656 Door sensors have two types: ** NC (Normal close)** and **NO (normal open)**. The connection for both type sensors are the same. But the decoding for payload are reverse, user need to modify this in the IoT Server decoder.
657
Saxer Lin 36.1 658 When door sensor is shorted, there will extra power consumption in the circuit, the extra current is 3v3/R14 = 3v3/1Mohm = 3uA which can be ignored.
Edwin Chen 14.1 659
660 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379283019-229.png?rev=1.1||alt="1656379283019-229.png"]]
661
662 The above photos shows the two parts of the magnetic switch fitted to a door.
663
664 The software by default uses the falling edge on the signal line as an interrupt. We need to modify it to accept both the rising edge (0v ~-~-> VCC , door close) and the falling edge (VCC ~-~-> 0v , door open) as the interrupt.
665
666 The command is:
667
Xiaoling 43.8 668 (% style="color:blue" %)**AT+INTMOD1=1   ** (%%) ~/~/(more info about INMOD please refer** **[[**AT Command Manual**>>url:http://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/&file=DRAGINO_LSN50_AT_Commands_v1.5.1.pdf]]**. **)
Edwin Chen 14.1 669
670 Below shows some screen captures in TTN V3:
671
672 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379339508-835.png?rev=1.1||alt="1656379339508-835.png"]]
673
674 In MOD=1, user can use byte 6 to see the status for door open or close. TTN V3 decoder is as below:
675
676 door= (bytes[6] & 0x80)? "CLOSE":"OPEN";
677
678
Saxer Lin 26.2 679 ==== 2.3.3.6 I2C Interface (SHT20 & SHT31) ====
Edwin Chen 14.1 680
Saxer Lin 26.2 681 The SDA and SCK are I2C interface lines. You can use these to connect to an I2C device and get the sensor data.
Edwin Chen 14.1 682
Saxer Lin 40.1 683 We have made an example to show how to use the I2C interface to connect to the SHT20/ SHT31 Temperature and Humidity Sensor.
Edwin Chen 14.1 684
Saxer Lin 40.1 685 Notice: Different I2C sensors have different I2C commands set and initiate process, if user want to use other I2C sensors, User need to re-write the source code to support those sensors. SHT20/ SHT31 code in SN50_v3 will be a good reference.
Edwin Chen 14.1 686
687 Below is the connection to SHT20/ SHT31. The connection is as below:
688
689
Saxer Lin 40.1 690 [[image:image-20230513103633-3.png||height="448" width="716"]]
Saxer Lin 36.1 691
Edwin Chen 14.1 692 The device will be able to get the I2C sensor data now and upload to IoT Server.
693
694 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379664142-345.png?rev=1.1||alt="1656379664142-345.png"]]
695
696 Convert the read byte to decimal and divide it by ten.
697
Edwin Chen 2.1 698 **Example:**
699
Edwin Chen 14.1 700 Temperature:  Read:0116(H) = 278(D)  Value:  278 /10=27.8℃;
Edwin Chen 2.1 701
Edwin Chen 14.1 702 Humidity:    Read:0248(H)=584(D)  Value:  584 / 10=58.4, So 58.4%
Edwin Chen 2.1 703
Edwin Chen 14.1 704 If you want to use other I2C device, please refer the SHT20 part source code as reference.
Edwin Chen 2.1 705
706
Edwin Chen 14.1 707 ==== 2.3.3.7  ​Distance Reading ====
Edwin Chen 2.1 708
Edwin Chen 14.1 709 Refer [[Ultrasonic Sensor section>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.8UltrasonicSensor]].
710
711
712 ==== 2.3.3.8 Ultrasonic Sensor ====
713
Saxer Lin 26.2 714 This Fundamental Principles of this sensor can be found at this link: [[https:~~/~~/wiki.dfrobot.com/Weather_-_proof_Ultrasonic_Sensor_with_Separate_Probe_SKU~~_~~__SEN0208>>url:https://wiki.dfrobot.com/Weather_-_proof_Ultrasonic_Sensor_with_Separate_Probe_SKU___SEN0208]]
Edwin Chen 14.1 715
Saxer Lin 36.1 716 The SN50_v3 detects the pulse width of the sensor and converts it to mm output. The accuracy will be within 1 centimeter. The usable range (the distance between the ultrasonic probe and the measured object) is between 24cm and 600cm.
Edwin Chen 14.1 717
Saxer Lin 36.1 718 The working principle of this sensor is similar to the **HC-SR04** ultrasonic sensor.
719
Edwin Chen 14.1 720 The picture below shows the connection:
721
Saxer Lin 36.1 722 [[image:image-20230512173903-6.png||height="596" width="715"]]
Edwin Chen 14.1 723
Saxer Lin 36.1 724 Connect to the SN50_v3 and run **AT+MOD=2** to switch to ultrasonic mode (ULT).
Edwin Chen 14.1 725
726 The ultrasonic sensor uses the 8^^th^^ and 9^^th^^ byte for the measurement value.
727
728 **Example:**
729
730 Distance:  Read: 0C2D(Hex) = 3117(D)  Value:  3117 mm=311.7 cm
731
732
733
734 ==== 2.3.3.9  Battery Output - BAT pin ====
735
736 The BAT pin of SN50v3 is connected to the Battery directly. If users want to use BAT pin to power an external sensor. User need to make sure the external sensor is of low power consumption. Because the BAT pin is always open. If the external sensor is of high power consumption. the battery of SN50v3-LB will run out very soon.
737
738
739 ==== 2.3.3.10  +5V Output ====
740
741 SN50v3 will enable +5V output before all sampling and disable the +5v after all sampling. 
742
743 The 5V output time can be controlled by AT Command.
744
Xiaoling 43.9 745 (% style="color:blue" %)**AT+5VT=1000**
Edwin Chen 14.1 746
747 Means set 5V valid time to have 1000ms. So the real 5V output will actually have 1000ms + sampling time for other sensors.
748
749 By default the AT+5VT=500. If the external sensor which require 5v and require more time to get stable state, user can use this command to increase the power ON duration for this sensor.
750
751
752
753 ==== 2.3.3.11  BH1750 Illumination Sensor ====
754
755 MOD=1 support this sensor. The sensor value is in the 8^^th^^ and 9^^th^^ bytes.
756
Saxer Lin 40.1 757 [[image:image-20230512172447-4.png||height="416" width="712"]]
Edwin Chen 14.1 758
Saxer Lin 40.1 759 [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220628110012-12.png?rev=1.1||alt="image-20220628110012-12.png" height="361" width="953"]]
Edwin Chen 14.1 760
761
762 ==== 2.3.3.12  Working MOD ====
763
764 The working MOD info is contained in the Digital in & Digital Interrupt byte (7^^th^^ Byte).
765
766 User can use the 3^^rd^^ ~~ 7^^th^^  bit of this byte to see the working mod:
767
768 Case 7^^th^^ Byte >> 2 & 0x1f:
769
770 * 0: MOD1
771 * 1: MOD2
772 * 2: MOD3
773 * 3: MOD4
774 * 4: MOD5
775 * 5: MOD6
Saxer Lin 36.1 776 * 6: MOD7
777 * 7: MOD8
778 * 8: MOD9
Edwin Chen 14.1 779
Saxer Lin 43.1 780
Xiaoling 43.9 781
Edwin Chen 2.1 782 == 2.4 Payload Decoder file ==
783
784
785 In TTN, use can add a custom payload so it shows friendly reading
786
787 In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from:
788
Saxer Lin 40.1 789 [[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/SN50_v3-LB>>https://github.com/dragino/dragino-end-node-decoder/tree/main/SN50_v3-LB]]
Edwin Chen 2.1 790
791
792
Edwin Chen 15.1 793 == 2.5 Frequency Plans ==
Edwin Chen 2.1 794
795
Edwin Chen 15.1 796 The SN50v3-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
Edwin Chen 2.1 797
798 [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
799
800
Edwin Chen 16.1 801 = 3. Configure SN50v3-LB =
Edwin Chen 2.1 802
803 == 3.1 Configure Methods ==
804
805
Edwin Chen 16.1 806 SN50v3-LB supports below configure method:
Edwin Chen 2.1 807
808 * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
809 * AT Command via UART Connection : See [[UART Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
810 * LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
811
812 == 3.2 General Commands ==
813
814
815 These commands are to configure:
816
817 * General system settings like: uplink interval.
818 * LoRaWAN protocol & radio related command.
819
820 They are same for all Dragino Devices which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:
821
822 [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
823
824
Edwin Chen 16.1 825 == 3.3 Commands special design for SN50v3-LB ==
Edwin Chen 2.1 826
827
828 These commands only valid for S31x-LB, as below:
829
830
831 === 3.3.1 Set Transmit Interval Time ===
832
833 Feature: Change LoRaWAN End Node Transmit Interval.
834
835 (% style="color:blue" %)**AT Command: AT+TDC**
836
837 (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
838 |=(% style="width: 156px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3" %)**Function**|=(% style="background-color:#D9E2F3" %)**Response**
839 |(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
840 30000
841 OK
842 the interval is 30000ms = 30s
843 )))
844 |(% style="width:156px" %)AT+TDC=60000|(% style="width:137px" %)Set Transmit Interval|(((
845 OK
846 Set transmit interval to 60000ms = 60 seconds
847 )))
848
849 (% style="color:blue" %)**Downlink Command: 0x01**
850
851 Format: Command Code (0x01) followed by 3 bytes time value.
852
853 If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
854
855 * Example 1: Downlink Payload: 0100001E  ~/~/  Set Transmit Interval (TDC) = 30 seconds
856 * Example 2: Downlink Payload: 0100003C  ~/~/  Set Transmit Interval (TDC) = 60 seconds
857
Saxer Lin 40.1 858
Xiaoling 43.9 859
Edwin Chen 2.1 860 === 3.3.2 Get Device Status ===
861
Saxer Lin 40.1 862 Send a LoRaWAN downlink to ask the device to send its status.
Edwin Chen 2.1 863
864 (% style="color:blue" %)**Downlink Payload:  **(%%)0x26 01
865
866 Sensor will upload Device Status via FPORT=5. See payload section for detail.
867
868
Saxer Lin 36.1 869 === 3.3.3 Set Interrupt Mode ===
Edwin Chen 2.1 870
871 Feature, Set Interrupt mode for GPIO_EXIT.
872
Saxer Lin 36.1 873 (% style="color:blue" %)**AT Command: AT+INTMOD1，AT+INTMOD2，AT+INTMOD3**
Edwin Chen 2.1 874
875 (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
876 |=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
Saxer Lin 36.1 877 |(% style="width:154px" %)AT+INTMOD1=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
Edwin Chen 2.1 878 0
879 OK
880 the mode is 0 =Disable Interrupt
881 )))
Saxer Lin 36.1 882 |(% style="width:154px" %)AT+INTMOD1=2|(% style="width:196px" %)(((
Edwin Chen 2.1 883 Set Transmit Interval
884 0. (Disable Interrupt),
885 ~1. (Trigger by rising and falling edge)
886 2. (Trigger by falling edge)
887 3. (Trigger by rising edge)
888 )))|(% style="width:157px" %)OK
Saxer Lin 36.1 889 |(% style="width:154px" %)AT+INTMOD2=3|(% style="width:196px" %)(((
890 Set Transmit Interval
Edwin Chen 2.1 891
Saxer Lin 36.1 892 trigger by rising edge.
893 )))|(% style="width:157px" %)OK
894 |(% style="width:154px" %)AT+INTMOD3=0|(% style="width:196px" %)Disable Interrupt|(% style="width:157px" %)OK
895
Edwin Chen 2.1 896 (% style="color:blue" %)**Downlink Command: 0x06**
897
898 Format: Command Code (0x06) followed by 3 bytes.
899
900 This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
901
Saxer Lin 36.1 902 * Example 1: Downlink Payload: 06000000  **~-~-->**  AT+INTMOD1=0
903 * Example 2: Downlink Payload: 06000003  **~-~-->**  AT+INTMOD1=3
904 * Example 3: Downlink Payload: 06000102  **~-~-->**  AT+INTMOD2=2
905 * Example 4: Downlink Payload: 06000201  **~-~-->**  AT+INTMOD3=1
Edwin Chen 2.1 906
Saxer Lin 40.1 907
Xiaoling 43.9 908
Saxer Lin 36.1 909 === 3.3.4 Set Power Output Duration ===
910
911 Control the output duration 5V . Before each sampling, device will
912
913 ~1. first enable the power output to external sensor,
914
915 2. keep it on as per duration, read sensor value and construct uplink payload
916
917 3. final, close the power output.
918
919 (% style="color:blue" %)**AT Command: AT+5VT**
920
921 (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
922 |=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
923 |(% style="width:154px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:157px" %)(((
924 500(default)
925 OK
926 )))
927 |(% style="width:154px" %)AT+5VT=1000|(% style="width:196px" %)(((
928 Close after a delay of 1000 milliseconds.
929 )))|(% style="width:157px" %)OK
930
931 (% style="color:blue" %)**Downlink Command: 0x07**
932
933 Format: Command Code (0x07) followed by 2 bytes.
934
935 The first and second bytes are the time to turn on.
936
Saxer Lin 40.1 937 * Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
938 * Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
Saxer Lin 36.1 939
Saxer Lin 40.1 940
Xiaoling 43.9 941
Saxer Lin 36.1 942 === 3.3.5 Set Weighing parameters ===
943
Saxer Lin 37.1 944 Feature: Working mode 5 is effective, weight initialization and weight factor setting of HX711.
Saxer Lin 36.1 945
946 (% style="color:blue" %)**AT Command: AT+WEIGRE,AT+WEIGAP**
947
948 (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
949 |=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
Saxer Lin 37.1 950 |(% style="width:154px" %)AT+WEIGRE|(% style="width:196px" %)Weight is initialized to 0.|(% style="width:157px" %)OK
951 |(% style="width:154px" %)AT+WEIGAP=？|(% style="width:196px" %)400.0|(% style="width:157px" %)OK(default)
952 |(% style="width:154px" %)AT+WEIGAP=400.3|(% style="width:196px" %)Set the factor to 400.3.|(% style="width:157px" %)OK
Saxer Lin 36.1 953
954 (% style="color:blue" %)**Downlink Command: 0x08**
955
Saxer Lin 37.1 956 Format: Command Code (0x08) followed by 2 bytes or 4 bytes.
Saxer Lin 36.1 957
Saxer Lin 37.1 958 Use AT+WEIGRE when the first byte is 1, only 1 byte. When it is 2, use AT+WEIGAP, there are 3 bytes.
Saxer Lin 36.1 959
Saxer Lin 37.1 960 The second and third bytes are multiplied by 10 times to be the AT+WEIGAP value.
Saxer Lin 36.1 961
Saxer Lin 37.1 962 * Example 1: Downlink Payload: 0801  **~-~-->**  AT+WEIGRE
963 * Example 2: Downlink Payload: 08020FA3  **~-~-->**  AT+WEIGAP=400.3
964 * Example 3: Downlink Payload: 08020FA0  **~-~-->**  AT+WEIGAP=400.0
965
Saxer Lin 40.1 966
Xiaoling 43.9 967
Saxer Lin 36.1 968 === 3.3.6 Set Digital pulse count value ===
969
970 Feature: Set the pulse count value.
971
Saxer Lin 37.1 972 Count 1 is PA8 pin of mode 6 and mode 9. Count 2 is PA4 pin of mode 9.
973
Saxer Lin 36.1 974 (% style="color:blue" %)**AT Command: AT+SETCNT**
975
976 (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
977 |=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
978 |(% style="width:154px" %)AT+SETCNT=1,100|(% style="width:196px" %)Initialize the count value 1 to 100.|(% style="width:157px" %)OK
979 |(% style="width:154px" %)AT+SETCNT=2,0|(% style="width:196px" %)Initialize the count value 2 to 0.|(% style="width:157px" %)OK
980
981 (% style="color:blue" %)**Downlink Command: 0x09**
982
983 Format: Command Code (0x09) followed by 5 bytes.
984
985 The first byte is to select which count value to initialize, and the next four bytes are the count value to be initialized.
986
987 * Example 1: Downlink Payload: 090100000000  **~-~-->**  AT+SETCNT=1,0
Saxer Lin 37.1 988 * Example 2: Downlink Payload: 0902000003E8  **~-~-->**  AT+SETCNT=2,1000
Saxer Lin 36.1 989
Saxer Lin 40.1 990
Xiaoling 43.9 991
Saxer Lin 36.1 992 === 3.3.7 Set Workmode ===
993
Saxer Lin 37.1 994 Feature: Switch working mode.
Saxer Lin 36.1 995
996 (% style="color:blue" %)**AT Command: AT+MOD**
997
998 (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
999 |=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
1000 |(% style="width:154px" %)AT+MOD=?|(% style="width:196px" %)Get the current working mode.|(% style="width:157px" %)(((
1001 OK
1002 )))
1003 |(% style="width:154px" %)AT+MOD=4|(% style="width:196px" %)Set the working mode to 3DS18B20s.|(% style="width:157px" %)(((
1004 OK
1005 Attention:Take effect after ATZ
1006 )))
1007
1008 (% style="color:blue" %)**Downlink Command: 0x0A**
1009
1010 Format: Command Code (0x0A) followed by 1 bytes.
1011
1012 * Example 1: Downlink Payload: 0A01  **~-~-->**  AT+MOD=1
1013 * Example 2: Downlink Payload: 0A04  **~-~-->**  AT+MOD=4
1014
Saxer Lin 40.1 1015
Xiaoling 43.9 1016
Edwin Chen 2.1 1017 = 4. Battery & Power Consumption =
1018
1019
Edwin Chen 11.1 1020 SN50v3-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
Edwin Chen 2.1 1021
1022 [[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
1023
1024
1025 = 5. OTA Firmware update =
1026
1027
1028 (% class="wikigeneratedid" %)
Edwin Chen 11.1 1029 User can change firmware SN50v3-LB to:
Edwin Chen 2.1 1030
1031 * Change Frequency band/ region.
1032 * Update with new features.
1033 * Fix bugs.
1034
1035 Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/kwqv57tp6pejias/AAAopYMATh1GM6fZ-VRCLrpDa?dl=0]]**
1036
1037
1038 Methods to Update Firmware:
1039
1040 * (Recommanded way) OTA firmware update via wireless:   [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
1041 * Update through UART TTL interface.**[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
1042
1043 = 6. FAQ =
1044
Edwin Chen 17.1 1045 == 6.1 Where can i find source code of SN50v3-LB? ==
Edwin Chen 2.1 1046
Edwin Chen 17.1 1047 * **[[Hardware Source Files>>https://github.com/dragino/Lora/tree/master/LSN50/v3.0]].**
1048 * **[[Software Source Code & Compile instruction>>https://github.com/dragino/SN50v3]].**
Edwin Chen 2.1 1049
1050 = 7. Order Info =
1051
1052
Edwin Chen 10.1 1053 Part Number: (% style="color:blue" %)**SN50v3-LB-XX-YY**
Edwin Chen 2.1 1054
1055 (% style="color:red" %)**XX**(%%): The default frequency band
Edwin Chen 11.1 1056
Edwin Chen 2.1 1057 * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
1058 * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
1059 * (% style="color:red" %)**EU433**(%%): LoRaWAN EU433 band
1060 * (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
1061 * (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
1062 * (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
1063 * (% style="color:red" %)**IN865**(%%): LoRaWAN IN865 band
1064 * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1065
Edwin Chen 10.1 1066 (% style="color:red" %)**YY: ** (%%)Hole Option
Edwin Chen 2.1 1067
Edwin Chen 10.1 1068 * (% style="color:red" %)**12**(%%): With M12 waterproof cable hole
1069 * (% style="color:red" %)**16**(%%): With M16 waterproof cable hole
1070 * (% style="color:red" %)**20**(%%): With M20 waterproof cable hole
1071 * (% style="color:red" %)**NH**(%%): No Hole
1072
Edwin Chen 2.1 1073 = 8. ​Packing Info =
1074
1075 (% style="color:#037691" %)**Package Includes**:
1076
Edwin Chen 10.1 1077 * SN50v3-LB LoRaWAN Generic Node
Edwin Chen 2.1 1078
1079 (% style="color:#037691" %)**Dimension and weight**:
1080
1081 * Device Size: cm
1082 * Device Weight: g
1083 * Package Size / pcs : cm
1084 * Weight / pcs : g
1085
1086 = 9. Support =
1087
1088
1089 * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
Xiaoling 43.10 1090
Xiaoling 41.4 1091 * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.cc>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.cc]]