Last modified by Bei Jinggeng on 2025/01/10 15:51
<
From version < 88.1 >
edited by Mengting Qiu
on 2024/07/17 11:31
To version < 104.1 >
edited by Bei Jinggeng
on 2024/12/04 14:09
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.ting
1 +XWiki.Bei
Content
... ... @@ -22,7 +22,7 @@
22 22  == 1.1 What is SN50v3-LB/LS LoRaWAN Generic Node ==
23 23  
24 24  
25 -(% style="color:blue" %)**SN50V3-LB/LS **(%%)LoRaWAN Sensor Node is a Long Range LoRa Sensor Node. It is designed for outdoor use and powered by (% style="color:blue" %)** 8500mAh Li/SOCl2 battery**(%%)  or (% style="color:blue" %)**solar powered + li-on battery**(%%) for long term use.SN50V3-LB/LS is designed to facilitate developers to quickly deploy industrial level LoRa and IoT solutions. It help users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to program, create and connect your things everywhere.
25 +(% style="color:blue" %)**SN50V3-LB/LS **(%%)LoRaWAN Sensor Node is a Long Range LoRa Sensor Node. It is designed for outdoor use and powered by (% style="color:blue" %)** 8500mAh Li/SOCl2 battery**(%%)  or (% style="color:blue" %)**solar powered + Li-ion battery**(%%) for long term use.SN50V3-LB/LS is designed to facilitate developers to quickly deploy industrial level LoRa and IoT solutions. It help users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to program, create and connect your things everywhere.
26 26  
27 27  (% style="color:blue" %)**SN50V3-LB/LS wireless part**(%%) is based on SX1262 allows the user to send data and reach extremely long ranges at low data-rates.It provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, and so on.
28 28  
... ... @@ -44,7 +44,7 @@
44 44  * Uplink on periodically
45 45  * Downlink to change configure
46 46  * 8500mAh Li/SOCl2 Battery (SN50v3-LB)
47 -* Solar panel + 3000mAh Li-on battery (SN50v3-LS)
47 +* Solar panel + 3000mAh Li-ion battery (SN50v3-LS)
48 48  
49 49  == 1.3 Specification ==
50 50  
... ... @@ -135,10 +135,9 @@
135 135  === 1.8.1 for LB version ===
136 136  
137 137  
138 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]][[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143899218-599.png]]
138 +[[image:image-20240924112806-1.png||height="548" width="894"]]
139 139  
140 140  
141 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
142 142  
143 143  === 1.8.2 for LS version ===
144 144  
... ... @@ -688,6 +688,61 @@
688 688  [[image:image-20230817173858-5.png||height="634" width="843"]]
689 689  
690 690  
690 +
691 +==== 2.3.2.11  MOD~=11 (TEMP117)(Since firmware V1.3.0) ====
692 +
693 +
694 +In this mode, uplink payload includes in total 11 bytes. Uplink packets use FPORT=2.
695 +
696 +(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:517px" %)
697 +|(% style="background-color:#4f81bd; color:white; width:50px" %)**Size(bytes)**|(% style="background-color:#4f81bd; color:white; width:20px" %)**2**|(% style="background-color:#4f81bd; color:white; width:100px" %)**2**|(% style="background-color:#4f81bd; color:white; width:50px" %)**2**|(% style="background-color:#4f81bd; color:white; width:90px" %)**1**|(% style="background-color:#4f81bd; color:white; width:128px" %)**2**|(% style="background-color:#4f81bd; color:white; width:79px" %)**2**
698 +|Value|Bat|(% style="width:191px" %)(((
699 +Temperature(DS18B20)(PC13)
700 +)))|(% style="width:78px" %)(((
701 +ADC(PA4)
702 +)))|(% style="width:216px" %)(((
703 +Digital in(PB15)&Digital Interrupt(PA8)
704 +)))|(% style="width:308px" %)(((
705 +Temperature
706 +
707 +(TEMP117)
708 +)))|(% style="width:154px" %)(((
709 +Reserved position, meaningless
710 +
711 +(0x0000)
712 +)))
713 +
714 +[[image:image-20240717113113-1.png||height="352" width="793"]]
715 +
716 +Connection:
717 +
718 +[[image:image-20240717141528-2.jpeg||height="430" width="654"]]
719 +
720 +
721 +==== 2.3.2.12  MOD~=12 (Count+SHT31)(Since firmware V1.3.1) ====
722 +
723 +
724 +This mode has total 11 bytes. As shown below:
725 +
726 +(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:517px" %)
727 +|=(% style="width: 86px; background-color: rgb(79, 129, 189); color: white;" %)**Size(bytes)**|=(% style="width: 86px; background-color: rgb(79, 129, 189); color: white;" %)**2**|=(% style="width: 86px; background-color: rgb(79, 129, 189); color: white;" %)**2**|=(% style="width: 86px; background-color: rgb(79, 129, 189); color: white;" %)**2**|=(% style="width: 86px; background-color: rgb(79, 129, 189); color: white;" %)**1**|=(% style="width: 86px; background-color: rgb(79, 129, 189); color: white;" %)**4**
728 +|Value|BAT|(% style="width:86px" %)(((
729 + Temperature_SHT31
730 +)))|(% style="width:86px" %)(((
731 +Humidity_SHT31
732 +)))|(% style="width:86px" %)(((
733 + Digital in(PB15)
734 +)))|(% style="width:86px" %)(((
735 +Count(PA8)
736 +)))
737 +
738 +[[image:image-20240717150948-5.png||height="389" width="979"]]
739 +
740 +Wiring example:
741 +
742 +[[image:image-20240717152224-6.jpeg||height="359" width="680"]]
743 +
744 +
691 691  === 2.3.3  ​Decode payload ===
692 692  
693 693  
... ... @@ -1050,41 +1050,46 @@
1050 1050  === 3.3.3 Set Interrupt Mode ===
1051 1051  
1052 1052  
1053 -Feature, Set Interrupt mode for GPIO_EXIT.
1107 +Feature, Set Interrupt mode for PB14, PB15, PA4.
1054 1054  
1055 -(% style="color:blue" %)**AT Command: AT+INTMOD1,AT+INTMOD2,AT+INTMOD3**
1109 +Before using the interrupt function of the **INT** pin, users can set the interrupt triggering mode as required.
1056 1056  
1057 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1058 -|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 197px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 158px;background-color:#4F81BD;color:white" %)**Response**
1059 -|(% style="width:154px" %)AT+INTMOD1=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
1060 -0
1061 -OK
1062 -the mode is 0 =Disable Interrupt
1063 -)))
1064 -|(% style="width:154px" %)AT+INTMOD1=2|(% style="width:196px" %)(((
1065 -Set Transmit Interval
1066 -0. (Disable Interrupt),
1067 -~1. (Trigger by rising and falling edge)
1068 -2. (Trigger by falling edge)
1069 -3. (Trigger by rising edge)
1070 -)))|(% style="width:157px" %)OK
1071 -|(% style="width:154px" %)AT+INTMOD2=3|(% style="width:196px" %)(((
1072 -Set Transmit Interval
1073 -trigger by rising edge.
1074 -)))|(% style="width:157px" %)OK
1075 -|(% style="width:154px" %)AT+INTMOD3=0|(% style="width:196px" %)Disable Interrupt|(% style="width:157px" %)OK
1111 +(% style="color:#037691" %)**AT Command:**(% style="color:blue" %)** **(% style="color:#4472c4" %)**AT+INTMODx**
1076 1076  
1077 -(% style="color:blue" %)**Downlink Command: 0x06**
1113 +(% style="color:#4472c4" %)**AT+INTMODx:**
1078 1078  
1115 +* (% style="color:#4472c4" %)**AT+INTMOD1   **(%%)~/~/ Set the interrupt mode for (% style="background-color:yellow" %)** PB14**(%%) pin.
1116 +* (% style="color:#4472c4" %)**AT+INTMOD2   **(%%)~/~/ Set the interrupt mode for (% style="background-color:yellow" %)** PB15**(%%) pin.
1117 +* (% style="color:#4472c4" %)**AT+INTMOD3   **(%%)~/~/ Set the interrupt mode for (% style="background-color:yellow" %)** PA4**(%%) pin.
1118 +
1119 +**Parameter setting:**
1120 +
1121 +* **0:** Disable Interrupt
1122 +* **1:** Trigger by rising and falling edge
1123 +* **2:** Trigger by falling edge
1124 +* **3: **Trigger by rising edge
1125 +
1126 +**Example:**
1127 +
1128 +* AT+INTMOD1=0  ~/~/Disable the PB14 pin interrupt function
1129 +* AT+INTMOD2=2  ~/~/Set the interrupt of the PB15 pin to be triggered by the falling edge
1130 +* AT+INTMOD3=3  ~/~/Set the interrupt of the PA4 pin to be triggered by the rising edge
1131 +
1132 +(% style="color:#037691" %)**Downlink Command:**(% style="color:blue" %)** **(% style="color:#4472c4" %)**0x06 00 aa bb**
1133 +
1079 1079  Format: Command Code (0x06) followed by 3 bytes.
1080 1080  
1081 -This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
1136 +(% style="color:#4472c4" %)**aa:**(%%) Set the corresponding pin. ((% style="background-color:yellow" %)**00**(%%): PB14 Pin;  (% style="background-color:yellow" %)**01**(%%)**: **PB15 Pin;  (% style="background-color:yellow" %)**02**(%%): PA4 Pin.)
1082 1082  
1083 -* Example 1: Downlink Payload: 06000000  **~-~-->**  AT+INTMOD1=0
1084 -* Example 2: Downlink Payload: 06000003  **~-~-->**  AT+INTMOD1=3
1085 -* Example 3: Downlink Payload: 06000102  **~-~-->**  AT+INTMOD2=2
1086 -* Example 4: Downlink Payload: 06000201  **~-~-->**  AT+INTMOD3=1
1138 +(% style="color:#4472c4" %)**bb: **(%%)Set interrupt mode. ((% style="background-color:yellow" %)**00**(%%) Disable, (% style="background-color:yellow" %)**01**(%%) falling or rising, (% style="background-color:yellow" %)**02**(%%) falling, (% style="background-color:yellow" %)**03**(%%) rising)
1087 1087  
1140 +**Example:**
1141 +
1142 +* Downlink Payload: **06 00 00 01     **~/~/ Equal to AT+INTMOD1=1
1143 +* Downlink Payload: **06 00 01 02     **~/~/ Equal to AT+INTMOD2=2
1144 +* Downlink Payload: **06 00 02 03     **~/~/ Equal to AT+INTMOD3=3
1145 +
1146 +
1088 1088  === 3.3.4 Set Power Output Duration ===
1089 1089  
1090 1090  
... ... @@ -1272,8 +1272,8 @@
1272 1272  
1273 1273  Downlink payload:0B01 bb cc aa **~-~--> **AT+PWMOUT=a,b,c
1274 1274  
1275 -* Example 1: Downlink Payload: 0B01 03E8 0032 0005 **~-~-->**  AT+PWMSET=5,1000,50
1276 -* Example 2: Downlink Payload: 0B01 07D0 003C 000A **~-~-->**  AT+PWMSET=10,2000,60
1334 +* Example 1: Downlink Payload: 0B01 03E8 0032 0005 **~-~-->**  AT+PWMOUT=5,1000,50
1335 +* Example 2: Downlink Payload: 0B01 07D0 003C 000A **~-~-->**  AT+PWMOUT=10,2000,60
1277 1277  
1278 1278  = 4. Battery & Power Cons =
1279 1279  
... ... @@ -1300,21 +1300,39 @@
1300 1300  * (Recommanded way) OTA firmware update via wireless: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**
1301 1301  * Update through UART TTL interface: **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
1302 1302  
1303 -= 6. FAQ =
1362 += 6.  Developer Guide =
1304 1304  
1305 -== 6.1 Where can i find source code of SN50v3-LB/LS? ==
1364 +SN50v3 is an open source project, developer can use compile their firmware for customized applications. User can get the source code from:
1306 1306  
1366 +* (((
1367 +Software Source Code: [[Releases · dragino/SN50v3 (github.com)>>url:https://github.com/dragino/SN50v3/releases]]
1368 +)))
1369 +* (((
1370 +Hardware Design files:  **[[Hardware Source Files>>https://github.com/dragino/Lora/tree/master/LSN50/v3.0]].**
1371 +)))
1372 +* (((
1373 +Compile instruction:[[Compile instruction>>https://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Module/Compile%20and%20Upload%20Code%20to%20ASR6601%20Platform/]]
1374 +)))
1307 1307  
1308 -* **[[Hardware Source Files>>https://github.com/dragino/Lora/tree/master/LSN50/v3.0]].**
1309 -* **[[Software Source Code & Compile instruction>>https://github.com/dragino/SN50v3]].**
1376 +**~1. If you want to change frequency, modify the Preprocessor Symbols.**
1310 1310  
1311 -== 6.2 How to generate PWM Output in SN50v3-LB/LS? ==
1378 +For example, change EU868 to US915
1312 1312  
1380 +[[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656318662202-530.png?rev=1.1||alt="1656318662202-530.png"]]
1313 1313  
1382 +**2. Compile and build**
1383 +
1384 +[[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220627163212-17.png?rev=1.1||alt="image-20220627163212-17.png"]]
1385 +
1386 += 7. FAQ =
1387 +
1388 +== 7.1 How to generate PWM Output in SN50v3-LB/LS? ==
1389 +
1390 +
1314 1314  See this document: **[[Generate PWM Output on SN50v3>>https://www.dropbox.com/scl/fi/r3trcet2knujg40w0mgyn/Generate-PWM-Output-on-SN50v3.pdf?rlkey=rxsgmrhhrv62iiiwjq9sv10bn&dl=0]]**.
1315 1315  
1316 1316  
1317 -== 6.3 How to put several sensors to a SN50v3-LB/LS? ==
1394 +== 7.2 How to put several sensors to a SN50v3-LB/LS? ==
1318 1318  
1319 1319  
1320 1320  When we want to put several sensors to A SN50v3-LB/LS, the waterproof at the grand connector will become an issue. User can try to exchange the grand connector to below type.
... ... @@ -1324,7 +1324,7 @@
1324 1324  [[image:image-20230810121434-1.png||height="242" width="656"]]
1325 1325  
1326 1326  
1327 -= 7. Order Info =
1404 += 8. Order Info =
1328 1328  
1329 1329  
1330 1330  Part Number: (% style="color:blue" %)**SN50v3-LB-XX-YY**(%%) or (% style="color:blue" %)**SN50v3-LS-XX-YY**
... ... @@ -1347,7 +1347,7 @@
1347 1347  * (% style="color:red" %)**20**(%%): With M20 waterproof cable hole
1348 1348  * (% style="color:red" %)**NH**(%%): No Hole
1349 1349  
1350 -= 8. ​Packing Info =
1427 += 9. ​Packing Info =
1351 1351  
1352 1352  
1353 1353  (% style="color:#037691" %)**Package Includes**:
... ... @@ -1361,7 +1361,7 @@
1361 1361  * Package Size / pcs : cm
1362 1362  * Weight / pcs : g
1363 1363  
1364 -= 9. Support =
1441 += 10. Support =
1365 1365  
1366 1366  
1367 1367  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
image-20240717141512-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.ting
Size
... ... @@ -1,0 +1,1 @@
1 +948.8 KB
Content
image-20240717141528-2.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.ting
Size
... ... @@ -1,0 +1,1 @@
1 +234.2 KB
Content
image-20240717145707-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.ting
Size
... ... @@ -1,0 +1,1 @@
1 +39.8 KB
Content
image-20240717150334-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.ting
Size
... ... @@ -1,0 +1,1 @@
1 +37.6 KB
Content
image-20240717150948-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.ting
Size
... ... @@ -1,0 +1,1 @@
1 +38.3 KB
Content
image-20240717152224-6.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.ting
Size
... ... @@ -1,0 +1,1 @@
1 +238.1 KB
Content
image-20240924112806-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +140.2 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0