Last modified by Bei Jinggeng on 2025/01/10 15:51
<
From version < 59.1 >
edited by Saxer Lin
on 2023/08/11 11:35
To version < 10.1 >
edited by Edwin Chen
on 2023/05/11 20:41
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -SN50v3-LB LoRaWAN Sensor Node User Manual
1 +SN50v3-LB User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Saxer
1 +XWiki.Edwin
Content
... ... @@ -1,5 +1,4 @@
1 -(% style="text-align:center" %)
2 -[[image:image-20230515135611-1.jpeg||height="589" width="589"]]
1 +[[image:image-20230511201248-1.png||height="403" width="489"]]
3 3  
4 4  
5 5  
... ... @@ -16,21 +16,23 @@
16 16  
17 17  == 1.1 What is SN50v3-LB LoRaWAN Generic Node ==
18 18  
19 -
20 20  (% style="color:blue" %)**SN50V3-LB **(%%)LoRaWAN Sensor Node is a Long Range LoRa Sensor Node. It is designed for outdoor use and powered by (% style="color:blue" %)** 8500mA Li/SOCl2 battery**(%%) for long term use.SN50V3-LB is designed to facilitate developers to quickly deploy industrial level LoRa and IoT solutions. It help users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to program, create and connect your things everywhere.
21 21  
20 +
22 22  (% style="color:blue" %)**SN50V3-LB wireless part**(%%) is based on SX1262 allows the user to send data and reach extremely long ranges at low data-rates.It provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, and so on.
23 23  
23 +
24 24  (% style="color:blue" %)**SN50V3-LB **(%%)has a powerful 48Mhz ARM microcontroller with 256KB flash and 64KB RAM. It has multiplex I/O pins to connect to different sensors.
25 25  
26 +
26 26  (% style="color:blue" %)**SN50V3-LB**(%%) has a built-in BLE module, user can configure the sensor remotely via Mobile Phone. It also support OTA upgrade via private LoRa protocol for easy maintaining.
27 27  
29 +
28 28  SN50V3-LB is the 3^^rd^^ generation of LSN50 series generic sensor node from Dragino. It is an (% style="color:blue" %)**open source project**(%%) and has a mature LoRaWAN stack and application software. User can use the pre-load software for their IoT projects or easily customize the software for different requirements.
29 29  
30 30  
31 31  == 1.2 ​Features ==
32 32  
33 -
34 34  * LoRaWAN 1.0.3 Class A
35 35  * Ultra-low power consumption
36 36  * Open-Source hardware/software
... ... @@ -41,10 +41,8 @@
41 41  * Downlink to change configure
42 42  * 8500mAh Battery for long term use
43 43  
44 -
45 45  == 1.3 Specification ==
46 46  
47 -
48 48  (% style="color:#037691" %)**Common DC Characteristics:**
49 49  
50 50  * Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
... ... @@ -79,10 +79,8 @@
79 79  * Sleep Mode: 5uA @ 3.3v
80 80  * LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
81 81  
82 -
83 83  == 1.4 Sleep mode and working mode ==
84 84  
85 -
86 86  (% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
87 87  
88 88  (% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
... ... @@ -107,7 +107,6 @@
107 107  )))
108 108  |(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
109 109  
110 -
111 111  == 1.6 BLE connection ==
112 112  
113 113  
... ... @@ -126,7 +126,7 @@
126 126  == 1.7 Pin Definitions ==
127 127  
128 128  
129 -[[image:image-20230610163213-1.png||height="404" width="699"]]
125 +[[image:image-20230511203450-2.png||height="443" width="785"]]
130 130  
131 131  
132 132  == 1.8 Mechanical ==
... ... @@ -139,9 +139,8 @@
139 139  [[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
140 140  
141 141  
142 -== 1.9 Hole Option ==
138 +== Hole Option ==
143 143  
144 -
145 145  SN50v3-LB has different hole size options for different size sensor cable. The options provided are M12, M16 and M20. The definition is as below:
146 146  
147 147  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220627104757-1.png?rev=1.1||alt="image-20220627104757-1.png"]]
... ... @@ -154,7 +154,7 @@
154 154  == 2.1 How it works ==
155 155  
156 156  
157 -The SN50v3-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the SN50v3-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
152 +The S31x-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the S31x-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
158 158  
159 159  
160 160  == 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
... ... @@ -162,14 +162,14 @@
162 162  
163 163  Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
164 164  
165 -The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
160 +The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
166 166  
167 167  
168 -(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from SN50v3-LB.
163 +(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from S31x-LB.
169 169  
170 -Each SN50v3-LB is shipped with a sticker with the default device EUI as below:
165 +Each S31x-LB is shipped with a sticker with the default device EUI as below:
171 171  
172 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/S31-LB_S31B-LB/WebHome/image-20230426084152-1.png?width=502&height=233&rev=1.1||alt="图片-20230426084152-1.png" height="233" width="502"]]
167 +[[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
173 173  
174 174  
175 175  You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
... ... @@ -196,10 +196,10 @@
196 196  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
197 197  
198 198  
199 -(% style="color:blue" %)**Step 2:**(%%) Activate SN50v3-LB
194 +(% style="color:blue" %)**Step 2:**(%%) Activate on S31x-LB
200 200  
201 201  
202 -Press the button for 5 seconds to activate the SN50v3-LB.
197 +Press the button for 5 seconds to activate the S31x-LB.
203 203  
204 204  (% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
205 205  
... ... @@ -211,7 +211,7 @@
211 211  === 2.3.1 Device Status, FPORT~=5 ===
212 212  
213 213  
214 -Users can use the downlink command(**0x26 01**) to ask SN50v3-LB to send device configure detail, include device configure status. SN50v3-LB will uplink a payload via FPort=5 to server.
209 +Users can use the downlink command(**0x26 01**) to ask S31x-LB to send device configure detail, include device configure status. S31x-LB will uplink a payload via FPort=5 to server.
215 215  
216 216  The Payload format is as below.
217 217  
... ... @@ -219,44 +219,46 @@
219 219  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
220 220  |(% colspan="6" style="background-color:#d9e2f3; color:#0070c0" %)**Device Status (FPORT=5)**
221 221  |(% style="width:103px" %)**Size (bytes)**|(% style="width:72px" %)**1**|**2**|(% style="width:91px" %)**1**|(% style="width:86px" %)**1**|(% style="width:44px" %)**2**
222 -|(% style="width:103px" %)Value|(% style="width:72px" %)Sensor Model|Firmware Version|(% style="width:91px" %)Frequency Band|(% style="width:86px" %)Sub-band|(% style="width:44px" %)BAT
217 +|(% style="width:103px" %)**Value**|(% style="width:72px" %)Sensor Model|Firmware Version|(% style="width:91px" %)Frequency Band|(% style="width:86px" %)Sub-band|(% style="width:44px" %)BAT
223 223  
224 224  Example parse in TTNv3
225 225  
221 +[[image:image-20230421171614-1.png||alt="图片-20230421171614-1.png"]]
226 226  
227 -(% style="color:#037691" %)**Sensor Model**(%%): For SN50v3-LB, this value is 0x1C
228 228  
224 +(% style="color:#037691" %)**Sensor Model**(%%): For S31x-LB, this value is 0x0A
225 +
229 229  (% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
230 230  
231 231  (% style="color:#037691" %)**Frequency Band**:
232 232  
233 -0x01: EU868
230 +*0x01: EU868
234 234  
235 -0x02: US915
232 +*0x02: US915
236 236  
237 -0x03: IN865
234 +*0x03: IN865
238 238  
239 -0x04: AU915
236 +*0x04: AU915
240 240  
241 -0x05: KZ865
238 +*0x05: KZ865
242 242  
243 -0x06: RU864
240 +*0x06: RU864
244 244  
245 -0x07: AS923
242 +*0x07: AS923
246 246  
247 -0x08: AS923-1
244 +*0x08: AS923-1
248 248  
249 -0x09: AS923-2
246 +*0x09: AS923-2
250 250  
251 -0x0a: AS923-3
248 +*0x0a: AS923-3
252 252  
253 -0x0b: CN470
250 +*0x0b: CN470
254 254  
255 -0x0c: EU433
252 +*0x0c: EU433
256 256  
257 -0x0d: KR920
254 +*0x0d: KR920
258 258  
259 -0x0e: MA869
256 +*0x0e: MA869
260 260  
261 261  
262 262  (% style="color:#037691" %)**Sub-Band**:
... ... @@ -277,348 +277,41 @@
277 277  Ex2: 0x0B49 = 2889mV
278 278  
279 279  
280 -=== 2.3.2 Working Modes & Sensor Data. Uplink via FPORT~=2 ===
277 +=== 2.3.2  Sensor Data. FPORT~=2 ===
281 281  
282 282  
283 -SN50v3-LB has different working mode for the connections of different type of sensors. This section describes these modes. Use can use the AT Command (% style="color:blue" %)**AT+MOD**(%%) to set SN50v3-LB to different working modes.
280 +Sensor Data is uplink via FPORT=2
284 284  
285 -For example:
286 -
287 - (% style="color:blue" %)**AT+MOD=2  ** (%%) ~/~/ will set the SN50v3 to work in MOD=2 distance mode which target to measure distance via Ultrasonic Sensor.
288 -
289 -
290 -(% style="color:red" %) **Important Notice:**
291 -
292 -~1. Some working modes has payload more than 12 bytes, The US915/AU915/AS923 frequency bands' definition has maximum 11 bytes in (% style="color:blue" %)**DR0**(%%). Server sides will see NULL payload while SN50v3-LB transmit in DR0 with 12 bytes payload.
293 -
294 -2. All modes share the same Payload Explanation from HERE.
295 -
296 -3. By default, the device will send an uplink message every 20 minutes.
297 -
298 -
299 -==== 2.3.2.1  MOD~=1 (Default Mode) ====
300 -
301 -
302 -In this mode, uplink payload includes in total 11 bytes. Uplink packets use FPORT=2.
303 -
304 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
305 -|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:20px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:90px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:130px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:80px" %)**2**
306 -|Value|Bat|(% style="width:191px" %)(((
307 -Temperature(DS18B20)(PC13)
308 -)))|(% style="width:78px" %)(((
309 -ADC(PA4)
310 -)))|(% style="width:216px" %)(((
311 -Digital in(PB15)&Digital Interrupt(PA8)
312 -)))|(% style="width:308px" %)(((
313 -Temperature(SHT20 or SHT31 or BH1750 Illumination Sensor)
314 -)))|(% style="width:154px" %)(((
315 -Humidity(SHT20 or SHT31)
316 -)))
317 -
318 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220627150949-6.png?rev=1.1||alt="image-20220627150949-6.png"]]
319 -
320 -
321 -==== 2.3.2.2  MOD~=2 (Distance Mode) ====
322 -
323 -
324 -This mode is target to measure the distance. The payload of this mode is totally 11 bytes. The 8^^th^^ and 9^^th^^ bytes is for the distance.
325 -
326 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
327 -|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:30px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:110px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:110px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:140px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**2**
328 -|Value|BAT|(% style="width:196px" %)(((
329 -Temperature(DS18B20)(PC13)
330 -)))|(% style="width:87px" %)(((
331 -ADC(PA4)
332 -)))|(% style="width:189px" %)(((
333 -Digital in(PB15) & Digital Interrupt(PA8)
334 -)))|(% style="width:208px" %)(((
335 -Distance measure by: 1) LIDAR-Lite V3HP
336 -Or 2) Ultrasonic Sensor
337 -)))|(% style="width:117px" %)Reserved
338 -
339 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656324539647-568.png?rev=1.1||alt="1656324539647-568.png"]]
340 -
341 -
342 -(% style="color:blue" %)**Connection of LIDAR-Lite V3HP:**
343 -
344 -[[image:image-20230512173758-5.png||height="563" width="712"]]
345 -
346 -
347 -(% style="color:blue" %)**Connection to Ultrasonic Sensor:**
348 -
349 -(% style="color:red" %)**Need to remove R1 and R2 resistors to get low power,otherwise there will be 240uA standby current.**
350 -
351 -[[image:image-20230512173903-6.png||height="596" width="715"]]
352 -
353 -
354 -For the connection to TF-Mini or TF-Luna , MOD2 payload is as below:
355 -
356 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
357 -|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:20px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:120px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:80px" %)**2**
358 -|Value|BAT|(% style="width:183px" %)(((
359 -Temperature(DS18B20)(PC13)
360 -)))|(% style="width:173px" %)(((
361 -Digital in(PB15) & Digital Interrupt(PA8)
362 -)))|(% style="width:84px" %)(((
363 -ADC(PA4)
364 -)))|(% style="width:323px" %)(((
365 -Distance measure by:1)TF-Mini plus LiDAR
366 -Or 2) TF-Luna LiDAR
367 -)))|(% style="width:188px" %)Distance signal  strength
368 -
369 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656376779088-686.png?rev=1.1||alt="1656376779088-686.png"]]
370 -
371 -
372 -**Connection to [[TF-Mini plus>>url:http://en.benewake.com/product/detail/5c345cd0e5b3a844c472329b.html]] LiDAR(UART version):**
373 -
374 -(% style="color:red" %)**Need to remove R3 and R4 resistors to get low power,otherwise there will be 400uA standby current.**
375 -
376 -[[image:image-20230512180609-7.png||height="555" width="802"]]
377 -
378 -
379 -**Connection to [[TF-Luna>>url:http://en.benewake.com/product/detail/5e1c1fd04d839408076b6255.html]] LiDAR (UART version):**
380 -
381 -(% style="color:red" %)**Need to remove R3 and R4 resistors to get low power,otherwise there will be 400uA standby current.**
382 -
383 -[[image:image-20230610170047-1.png||height="452" width="799"]]
384 -
385 -
386 -==== 2.3.2.3  MOD~=3 (3 ADC + I2C) ====
387 -
388 -
389 -This mode has total 12 bytes. Include 3 x ADC + 1x I2C
390 -
391 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
392 -|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
282 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
283 +|=(% style="width: 90px;background-color:#D9E2F3" %)(((
393 393  **Size(bytes)**
394 -)))|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 110px;background-color:#D9E2F3;color:#0070C0" %)2|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)2|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)1
395 -|Value|(% style="width:68px" %)(((
396 -ADC1(PA4)
397 -)))|(% style="width:75px" %)(((
398 -ADC2(PA5)
399 -)))|(((
400 -ADC3(PA8)
401 -)))|(((
402 -Digital Interrupt(PB15)
403 -)))|(% style="width:304px" %)(((
404 -Temperature(SHT20 or SHT31 or BH1750 Illumination Sensor)
405 -)))|(% style="width:163px" %)(((
406 -Humidity(SHT20 or SHT31)
407 -)))|(% style="width:53px" %)Bat
408 -
409 -[[image:image-20230513110214-6.png]]
410 -
411 -
412 -==== 2.3.2.4 MOD~=4 (3 x DS18B20) ====
413 -
414 -
415 -This mode has total 11 bytes. As shown below:
416 -
417 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
418 -|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:20px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**
419 -|Value|BAT|(% style="width:186px" %)(((
420 -Temperature1(DS18B20)(PC13)
421 -)))|(% style="width:82px" %)(((
422 -ADC(PA4)
423 -)))|(% style="width:210px" %)(((
424 -Digital in(PB15) & Digital Interrupt(PA8) 
425 -)))|(% style="width:191px" %)Temperature2(DS18B20)
426 -(PB9)|(% style="width:183px" %)Temperature3(DS18B20)(PB8)
427 -
428 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656377606181-607.png?rev=1.1||alt="1656377606181-607.png"]]
429 -
430 -
431 -[[image:image-20230513134006-1.png||height="559" width="736"]]
432 -
433 -
434 -==== 2.3.2.5  MOD~=5(Weight Measurement by HX711) ====
435 -
436 -
437 -[[image:image-20230512164658-2.png||height="532" width="729"]]
438 -
439 -Each HX711 need to be calibrated before used. User need to do below two steps:
440 -
441 -1. Zero calibration. Don't put anything on load cell and run (% style="color:blue" %)**AT+WEIGRE**(%%) to calibrate to Zero gram.
442 -1. Adjust calibration factor (default value 400): Put a known weight thing on load cell and run (% style="color:blue" %)**AT+WEIGAP**(%%) to adjust the Calibration Factor.
443 -1. (((
444 -Weight has 4 bytes, the unit is g.
445 -
446 -
447 -
285 +)))|=(% style="width: 80px;background-color:#D9E2F3" %)2|=(% style="width: 90px;background-color:#D9E2F3" %)4|=(% style="width:80px;background-color:#D9E2F3" %)1|=(% style="width: 80px;background-color:#D9E2F3" %)**2**|=(% style="width: 80px;background-color:#D9E2F3" %)2
286 +|(% style="width:99px" %)**Value**|(% style="width:69px" %)(((
287 +[[Battery>>||anchor="HBattery:"]]
288 +)))|(% style="width:130px" %)(((
289 +[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
290 +)))|(% style="width:91px" %)(((
291 +[[Alarm Flag>>||anchor="HAlarmFlag26MOD:"]]
292 +)))|(% style="width:103px" %)(((
293 +[[Temperature>>||anchor="HTemperature:"]]
294 +)))|(% style="width:80px" %)(((
295 +[[Humidity>>||anchor="HHumidity:"]]
448 448  )))
449 449  
450 -For example:
298 +==== (% style="color:#4472c4" %)**Battery**(%%) ====
451 451  
452 -(% style="color:blue" %)**AT+GETSENSORVALUE =0**
300 +Sensor Battery Level.
453 453  
454 -Response:  Weight is 401 g
455 -
456 -Check the response of this command and adjust the value to match the real value for thing.
457 -
458 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
459 -|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
460 -**Size(bytes)**
461 -)))|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 150px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 200px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**4**
462 -|Value|BAT|(% style="width:193px" %)(((
463 -Temperature(DS18B20)(PC13)
464 -)))|(% style="width:85px" %)(((
465 -ADC(PA4)
466 -)))|(% style="width:186px" %)(((
467 -Digital in(PB15) & Digital Interrupt(PA8)
468 -)))|(% style="width:100px" %)Weight
469 -
470 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220820120036-2.png?width=1003&height=469&rev=1.1||alt="image-20220820120036-2.png" height="469" width="1003"]]
471 -
472 -
473 -
474 -==== 2.3.2.6  MOD~=6 (Counting Mode) ====
475 -
476 -
477 -In this mode, the device will work in counting mode. It counts the interrupt on the interrupt pins and sends the count on TDC time.
478 -
479 -Connection is as below. The PIR sensor is a count sensor, it will generate interrupt when people come close or go away. User can replace the PIR sensor with other counting sensors.
480 -
481 -[[image:image-20230512181814-9.png||height="543" width="697"]]
482 -
483 -
484 -(% style="color:red" %)**Note:** **LoRaWAN wireless transmission will infect the PIR sensor. Which cause the counting value increase +1 for every uplink. User can change PIR sensor or put sensor away of the SN50_v3 to avoid this happen.**
485 -
486 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
487 -|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)**Size(bytes)**|=(% style="width: 40px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 180px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 80px;background-color:#D9E2F3;color:#0070C0" %)**4**
488 -|Value|BAT|(% style="width:256px" %)(((
489 -Temperature(DS18B20)(PC13)
490 -)))|(% style="width:108px" %)(((
491 -ADC(PA4)
492 -)))|(% style="width:126px" %)(((
493 -Digital in(PB15)
494 -)))|(% style="width:145px" %)(((
495 -Count(PA8)
496 -)))
497 -
498 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656378441509-171.png?rev=1.1||alt="1656378441509-171.png"]]
499 -
500 -
501 -==== 2.3.2.7  MOD~=7 (Three interrupt contact modes) ====
502 -
503 -
504 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
505 -|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
506 -**Size(bytes)**
507 -)))|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)1|=(% style="width: 40px;background-color:#D9E2F3;color:#0070C0" %)2
508 -|Value|BAT|(% style="width:188px" %)(((
509 -Temperature(DS18B20)
510 -(PC13)
511 -)))|(% style="width:83px" %)(((
512 -ADC(PA5)
513 -)))|(% style="width:184px" %)(((
514 -Digital Interrupt1(PA8)
515 -)))|(% style="width:186px" %)Digital Interrupt2(PA4)|(% style="width:197px" %)Digital Interrupt3(PB15)|(% style="width:100px" %)Reserved
516 -
517 -[[image:image-20230513111203-7.png||height="324" width="975"]]
518 -
519 -
520 -==== 2.3.2.8  MOD~=8 （3ADC+1DS18B20） ====
521 -
522 -
523 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
524 -|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
525 -**Size(bytes)**
526 -)))|=(% style="width: 30px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 110px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 70px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 120px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 70px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 70px;background-color:#D9E2F3;color:#0070C0" %)2
527 -|Value|BAT|(% style="width:207px" %)(((
528 -Temperature(DS18B20)
529 -(PC13)
530 -)))|(% style="width:94px" %)(((
531 -ADC1(PA4)
532 -)))|(% style="width:198px" %)(((
533 -Digital Interrupt(PB15)
534 -)))|(% style="width:84px" %)(((
535 -ADC2(PA5)
536 -)))|(% style="width:82px" %)(((
537 -ADC3(PA8)
538 -)))
539 -
540 -[[image:image-20230513111231-8.png||height="335" width="900"]]
541 -
542 -
543 -==== 2.3.2.9  MOD~=9 (3DS18B20+ two Interrupt count mode) ====
544 -
545 -
546 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
547 -|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
548 -**Size(bytes)**
549 -)))|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)4|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)4
550 -|Value|BAT|(((
551 -Temperature
552 -(DS18B20)(PC13)
553 -)))|(((
554 -Temperature2
555 -(DS18B20)(PB9)
556 -)))|(((
557 -Digital Interrupt
558 -(PB15)
559 -)))|(% style="width:193px" %)(((
560 -Temperature3
561 -(DS18B20)(PB8)
562 -)))|(% style="width:78px" %)(((
563 -Count1(PA8)
564 -)))|(% style="width:78px" %)(((
565 -Count2(PA4)
566 -)))
567 -
568 -[[image:image-20230513111255-9.png||height="341" width="899"]]
569 -
570 -(% style="color:blue" %)**The newly added AT command is issued correspondingly:**
571 -
572 -(% style="color:#037691" %)** AT+INTMOD1 PA8**(%%)  pin：  Corresponding downlink:  (% style="color:#037691" %)**06 00 00 xx**
573 -
574 -(% style="color:#037691" %)** AT+INTMOD2 PA4**(%%)  pin：  Corresponding downlink: (% style="color:#037691" %)**06 00 01 xx**
575 -
576 -(% style="color:#037691" %)** AT+INTMOD3 PB15**(%%)  pin：  Corresponding downlink:  (% style="color:#037691" %)** 06 00 02 xx**
577 -
578 -
579 -(% style="color:blue" %)**AT+SETCNT=aa,bb** 
580 -
581 -When AA is 1, set the count of PA8 pin to BB Corresponding downlink：09 01 bb bb bb bb
582 -
583 -When AA is 2, set the count of PA4 pin to BB Corresponding downlink：09 02 bb bb bb bb
584 -
585 -
586 -=== 2.3.3  ​Decode payload ===
587 -
588 -
589 -While using TTN V3 network, you can add the payload format to decode the payload.
590 -
591 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656378466788-734.png?rev=1.1||alt="1656378466788-734.png"]]
592 -
593 -The payload decoder function for TTN V3 are here:
594 -
595 -SN50v3-LB TTN V3 Payload Decoder:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>url:https://github.com/dragino/dragino-end-node-decoder]]
596 -
597 -
598 -==== 2.3.3.1 Battery Info ====
599 -
600 -
601 -Check the battery voltage for SN50v3-LB.
602 -
603 603  Ex1: 0x0B45 = 2885mV
604 604  
605 605  Ex2: 0x0B49 = 2889mV
606 606  
607 607  
608 -==== 2.3.3.2  Temperature (DS18B20) ====
609 609  
308 +==== (% style="color:#4472c4" %)**Temperature**(%%) ====
610 610  
611 -If there is a DS18B20 connected to PC13 pin. The temperature will be uploaded in the payload.
310 +**Example**:
612 612  
613 -More DS18B20 can check the [[3 DS18B20 mode>>||anchor="H2.3.2.4MOD3D4283xDS18B2029"]]
614 -
615 -(% style="color:blue" %)**Connection:**
616 -
617 -[[image:image-20230512180718-8.png||height="538" width="647"]]
618 -
619 -
620 -(% style="color:blue" %)**Example**:
621 -
622 622  If payload is: 0105H:  (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
623 623  
624 624  If payload is: FF3FH :  (FF3F & 8000 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
... ... @@ -626,236 +626,200 @@
626 626  （FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
627 627  
628 628  
629 -==== 2.3.3.3 Digital Input ====
319 +==== (% style="color:#4472c4" %)**Humidity**(%%) ====
630 630  
631 631  
632 -The digital input for pin PB15,
322 +Read:0x(0197)=412    Value:  412 / 10=41.2, So 41.2%
633 633  
634 -* When PB15 is high, the bit 1 of payload byte 6 is 1.
635 -* When PB15 is low, the bit 1 of payload byte 6 is 0.
636 636  
637 -(% class="wikigeneratedid" id="H2.3.3.4A0AnalogueDigitalConverter28ADC29" %)
638 -(((
639 -When the digital interrupt pin is set to AT+INTMODx=0, this pin is used as a digital input pin.
325 +==== (% style="color:#4472c4" %)**Alarm Flag& MOD**(%%) ====
640 640  
641 -(% style="color:red" %)**Note: The maximum voltage input supports 3.6V.**
642 642  
643 -
644 -)))
328 +**Example:**
645 645  
646 -==== 2.3.3.4  Analogue Digital Converter (ADC) ====
330 +If payload & 0x01 = 0x01  **~-~->** This is an Alarm Message
647 647  
332 +If payload & 0x01 = 0x00  **~-~->** This is a normal uplink message, no alarm
648 648  
649 -The measuring range of the ADC is only about 0.1V to 1.1V The voltage resolution is about 0.24mv.
334 +If payload >> 2 = 0x00  **~-~->**  means MOD=1, This is a sampling uplink message
650 650  
651 -When the measured output voltage of the sensor is not within the range of 0.1V and 1.1V, the output voltage terminal of the sensor shall be divided The example in the following figure is to reduce the output voltage of the sensor by three times If it is necessary to reduce more times, calculate according to the formula in the figure and connect the corresponding resistance in series.
336 +If payload >> 2 = 0x31  **~-~->**  means MOD=31, this message is a reply message for polling, this message contains the alarm settings. see [[this link>>path:#HPolltheAlarmsettings:]] for detail. 
652 652  
653 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220628150112-1.png?width=285&height=241&rev=1.1||alt="image-20220628150112-1.png" height="241" width="285"]]
654 654  
339 +== 2.4 Payload Decoder file ==
655 655  
656 -(% style="color:red" %)**Note: If the ADC type sensor needs to be powered by SN50_v3, it is recommended to use +5V to control its switch.Only sensors with low power consumption can be powered with VDD.**
657 657  
342 +In TTN, use can add a custom payload so it shows friendly reading
658 658  
659 -The position of PA5 on the hardware after **LSN50 v3.3** is changed to the position shown in the figure below, and the collected voltage becomes one-sixth of the original.
344 +In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from:
660 660  
661 -[[image:image-20230811113449-1.png||height="370" width="608"]]
346 +[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/LSN50v2-S31%26S31B >>https://github.com/dragino/dragino-end-node-decoder/tree/main/LSN50v2-S31%26S31B]]
662 662  
663 -==== 2.3.3.5 Digital Interrupt ====
664 664  
349 +== 2.5 Datalog Feature ==
665 665  
666 -Digital Interrupt refers to pin PA8, and there are different trigger methods. When there is a trigger, the SN50v3-LB will send a packet to the server.
667 667  
668 -(% style="color:blue" %)** Interrupt connection method:**
352 +Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, S31x-LB will store the reading for future retrieving purposes.
669 669  
670 -[[image:image-20230513105351-5.png||height="147" width="485"]]
671 671  
355 +=== 2.5.1 Ways to get datalog via LoRaWAN ===
672 672  
673 -(% style="color:blue" %)**Example to use with door sensor :**
674 674  
675 -The door sensor is shown at right. It is a two wire magnetic contact switch used for detecting the open/close status of doors or windows.
358 +Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayloadA028FPORT3D329"]], S31x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
676 676  
677 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379210849-860.png?rev=1.1||alt="1656379210849-860.png"]]
360 +* a) S31x-LB will do an ACK check for data records sending to make sure every data arrive server.
361 +* b) S31x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB gets a ACK, S31x-LB will consider there is a network connection and resend all NONE-ACK messages.
678 678  
679 -When the two pieces are close to each other, the 2 wire output will be short or open (depending on the type), while if the two pieces are away from each other, the 2 wire output will be the opposite status. So we can use SN50v3-LB interrupt interface to detect the status for the door or window.
363 +Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
680 680  
365 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
681 681  
682 -(% style="color:blue" %)**Below is the installation example:**
367 +=== 2.5.2 Unix TimeStamp ===
683 683  
684 -Fix one piece of the magnetic sensor to the door and connect the two pins to SN50v3-LB as follows:
685 685  
686 -* (((
687 -One pin to SN50v3-LB's PA8 pin
688 -)))
689 -* (((
690 -The other pin to SN50v3-LB's VDD pin
691 -)))
370 +S31x-LB uses Unix TimeStamp format based on
692 692  
693 -Install the other piece to the door. Find a place where the two pieces will be close to each other when the door is closed. For this particular magnetic sensor, when the door is closed, the output will be short, and PA8 will be at the VCC voltage.
372 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
694 694  
695 -Door sensors have two types: (% style="color:blue" %)** NC (Normal close)**(%%) and (% style="color:blue" %)**NO (normal open)**(%%). The connection for both type sensors are the same. But the decoding for payload are reverse, user need to modify this in the IoT Server decoder.
374 +User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
696 696  
697 -When door sensor is shorted, there will extra power consumption in the circuit, the extra current is 3v3/R14 = 3v3/1Mohm = 3uA which can be ignored.
376 +Below is the converter example
698 698  
699 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379283019-229.png?rev=1.1||alt="1656379283019-229.png"]]
378 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="图片-20220523001219-12.png" height="298" width="720"]]
700 700  
701 -The above photos shows the two parts of the magnetic switch fitted to a door.
380 +So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
702 702  
703 -The software by default uses the falling edge on the signal line as an interrupt. We need to modify it to accept both the rising edge (0v ~-~-> VCC , door close) and the falling edge (VCC ~-~-> 0v , door open) as the interrupt.
704 704  
705 -The command is:
383 +=== 2.5.3 Set Device Time ===
706 706  
707 -(% style="color:blue" %)**AT+INTMOD1=1   ** (%%) ~/~/  (more info about INMOD please refer** **[[**AT Command Manual**>>url:http://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/&file=DRAGINO_LSN50_AT_Commands_v1.5.1.pdf]]**. **)
708 708  
709 -Below shows some screen captures in TTN V3:
386 +User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
710 710  
711 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379339508-835.png?rev=1.1||alt="1656379339508-835.png"]]
388 +Once S31x-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to S31x-LB. If S31x-LB fails to get the time from the server, S31x-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
712 712  
390 +(% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
713 713  
714 -In **MOD=1**, user can use byte 6 to see the status for door open or close. TTN V3 decoder is as below:
715 715  
716 -door= (bytes[6] & 0x80)? "CLOSE":"OPEN";
393 +=== 2.5.4 Datalog Uplink payload (FPORT~=3) ===
717 717  
718 718  
719 -==== 2.3.3.6 I2C Interface (SHT20 & SHT31) ====
396 +The Datalog uplinks will use below payload format.
720 720  
398 +**Retrieval data payload:**
721 721  
722 -The SDA and SCK are I2C interface lines. You can use these to connect to an I2C device and get the sensor data.
400 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
401 +|=(% style="width: 80px;background-color:#D9E2F3" %)(((
402 +**Size(bytes)**
403 +)))|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 120px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 103px; background-color: rgb(217, 226, 243);" %)**1**|=(% style="width: 85px; background-color: rgb(217, 226, 243);" %)**4**
404 +|(% style="width:103px" %)**Value**|(% style="width:54px" %)(((
405 +[[Temp_Black>>||anchor="HTemperatureBlack:"]]
406 +)))|(% style="width:51px" %)[[Temp_White>>||anchor="HTemperatureWhite:"]]|(% style="width:89px" %)[[Temp_ Red or Temp _White>>||anchor="HTemperatureREDorTemperatureWhite:"]]|(% style="width:103px" %)Poll message flag & Ext|(% style="width:54px" %)[[Unix Time Stamp>>||anchor="H2.5.2UnixTimeStamp"]]
723 723  
724 -We have made an example to show how to use the I2C interface to connect to the SHT20/ SHT31 Temperature and Humidity Sensor.
408 +**Poll message flag & Ext:**
725 725  
726 -(% style="color:red" %)**Notice: Different I2C sensors have different I2C commands set and initiate process, if user want to use other I2C sensors, User need to re-write the source code to support those sensors. SHT20/ SHT31 code in SN50v3-LB will be a good reference.**
410 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20221006192726-1.png?width=754&height=112&rev=1.1||alt="图片-20221006192726-1.png" height="112" width="754"]]
727 727  
412 +**No ACK Message**:  1: This message means this payload is fromn Uplink Message which doesn't get ACK from the server before ( for **PNACKMD=1** feature)
728 728  
729 -Below is the connection to SHT20/ SHT31. The connection is as below:
414 +**Poll Message Flag**: 1: This message is a poll message reply.
730 730  
731 -[[image:image-20230610170152-2.png||height="501" width="846"]]
416 +* Poll Message Flag is set to 1.
732 732  
418 +* Each data entry is 11 bytes, to save airtime and battery, devices will send max bytes according to the current DR and Frequency bands.
733 733  
734 -The device will be able to get the I2C sensor data now and upload to IoT Server.
420 +For example, in US915 band, the max payload for different DR is:
735 735  
736 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379664142-345.png?rev=1.1||alt="1656379664142-345.png"]]
422 +**a) DR0:** max is 11 bytes so one entry of data
737 737  
738 -Convert the read byte to decimal and divide it by ten.
424 +**b) DR1:** max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
739 739  
740 -**Example:**
426 +**c) DR2:** total payload includes 11 entries of data
741 741  
742 -Temperature:  Read:0116(H) = 278(D)  Value:  278 /10=27.8℃;
428 +**d) DR3: **total payload includes 22 entries of data.
743 743  
744 -Humidity:    Read:0248(H)=584(D)  Value:  584 / 10=58.4, So 58.4%
430 +If devise doesn't have any data in the polling time. Device will uplink 11 bytes of 0   
745 745  
746 -If you want to use other I2C device, please refer the SHT20 part source code as reference.
747 747  
748 -
749 -==== 2.3.3.7  ​Distance Reading ====
750 -
751 -
752 -Refer [[Ultrasonic Sensor section>>||anchor="H2.3.3.8UltrasonicSensor"]].
753 -
754 -
755 -==== 2.3.3.8 Ultrasonic Sensor ====
756 -
757 -
758 -This Fundamental Principles of this sensor can be found at this link: [[https:~~/~~/wiki.dfrobot.com/Weather_-_proof_Ultrasonic_Sensor_with_Separate_Probe_SKU~~_~~__SEN0208>>url:https://wiki.dfrobot.com/Weather_-_proof_Ultrasonic_Sensor_with_Separate_Probe_SKU___SEN0208]]
759 -
760 -The SN50v3-LB detects the pulse width of the sensor and converts it to mm output. The accuracy will be within 1 centimeter. The usable range (the distance between the ultrasonic probe and the measured object) is between 24cm and 600cm.
761 -
762 -The working principle of this sensor is similar to the (% style="color:blue" %)**HC-SR04**(%%) ultrasonic sensor.
763 -
764 -The picture below shows the connection:
765 -
766 -[[image:image-20230512173903-6.png||height="596" width="715"]]
767 -
768 -
769 -Connect to the SN50v3-LB and run (% style="color:blue" %)**AT+MOD=2**(%%) to switch to ultrasonic mode (ULT).
770 -
771 -The ultrasonic sensor uses the 8^^th^^ and 9^^th^^ byte for the measurement value.
772 -
773 773  **Example:**
774 774  
775 -Distance:  Read: 0C2D(Hex) = 3117(D)  Value:  3117 mm=311.7 cm
435 +If S31x-LB has below data inside Flash:
776 776  
437 +[[image:1682646494051-944.png]]
777 777  
778 -==== 2.3.3.9  Battery Output - BAT pin ====
439 +If user sends below downlink command: 3160065F9760066DA705
779 779  
441 +Where : Start time: 60065F97 = time 21/1/19 04:27:03
780 780  
781 -The BAT pin of SN50v3-LB is connected to the Battery directly. If users want to use BAT pin to power an external sensor. User need to make sure the external sensor is of low power consumption. Because the BAT pin is always open. If the external sensor is of high power consumption. the battery of SN50v3-LB will run out very soon.
443 + Stop time: 60066DA7= time 21/1/19 05:27:03
782 782  
783 783  
784 -==== 2.3.3.10  +5V Output ====
446 +**S31x-LB will uplink this payload.**
785 785  
448 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-13.png?width=727&height=421&rev=1.1||alt="图片-20220523001219-13.png" height="421" width="727"]]
786 786  
787 -SN50v3-LB will enable +5V output before all sampling and disable the +5v after all sampling. 
450 +(((
451 +__**7FFF089801464160065F97**__ **__7FFF__ __088E__ __014B__ __41__ __60066009__** 7FFF0885014E41600660667FFF0875015141600662BE7FFF086B015541600665167FFF08660155416006676E7FFF085F015A41600669C67FFF0857015D4160066C1E
452 +)))
788 788  
789 -The 5V output time can be controlled by AT Command.
454 +(((
455 +Where the first 11 bytes is for the first entry:
456 +)))
790 790  
791 -(% style="color:blue" %)**AT+5VT=1000**
458 +(((
459 +7FFF089801464160065F97
460 +)))
792 792  
793 -Means set 5V valid time to have 1000ms. So the real 5V output will actually have 1000ms + sampling time for other sensors.
462 +(((
463 +**Ext sensor data**=0x7FFF/100=327.67
464 +)))
794 794  
795 -By default the **AT+5VT=500**. If the external sensor which require 5v and require more time to get stable state, user can use this command to increase the power ON duration for this sensor.
466 +(((
467 +**Temp**=0x088E/100=22.00
468 +)))
796 796  
470 +(((
471 +**Hum**=0x014B/10=32.6
472 +)))
797 797  
798 -==== 2.3.3.11  BH1750 Illumination Sensor ====
474 +(((
475 +**poll message flag & Ext**=0x41,means reply data,Ext=1
476 +)))
799 799  
478 +(((
479 +**Unix time** is 0x60066009=1611030423s=21/1/19 04:27:03
480 +)))
800 800  
801 -MOD=1 support this sensor. The sensor value is in the 8^^th^^ and 9^^th^^ bytes.
802 802  
803 -[[image:image-20230512172447-4.png||height="416" width="712"]]
483 +(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的
804 804  
485 +== 2.6 Temperature Alarm Feature ==
805 805  
806 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220628110012-12.png?rev=1.1||alt="image-20220628110012-12.png" height="361" width="953"]]
807 807  
488 +S31x-LB work flow with Alarm feature.
808 808  
809 -==== 2.3.3.12  Working MOD ====
810 810  
491 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/image-20220623090437-1.png?rev=1.1||alt="图片-20220623090437-1.png"]]
811 811  
812 -The working MOD info is contained in the Digital in & Digital Interrupt byte (7^^th^^ Byte).
813 813  
814 -User can use the 3^^rd^^ ~~ 7^^th^^  bit of this byte to see the working mod:
494 +== 2.7 Frequency Plans ==
815 815  
816 -Case 7^^th^^ Byte >> 2 & 0x1f:
817 817  
818 -* 0: MOD1
819 -* 1: MOD2
820 -* 2: MOD3
821 -* 3: MOD4
822 -* 4: MOD5
823 -* 5: MOD6
824 -* 6: MOD7
825 -* 7: MOD8
826 -* 8: MOD9
497 +The S31x-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
827 827  
828 -
829 -== 2.4 Payload Decoder file ==
830 -
831 -
832 -In TTN, use can add a custom payload so it shows friendly reading
833 -
834 -In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from:
835 -
836 -[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/SN50_v3-LB>>https://github.com/dragino/dragino-end-node-decoder/tree/main/SN50_v3-LB]]
837 -
838 -
839 -== 2.5 Frequency Plans ==
840 -
841 -
842 -The SN50v3-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
843 -
844 844  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
845 845  
846 846  
847 -= 3. Configure SN50v3-LB =
502 += 3. Configure S31x-LB =
848 848  
849 849  == 3.1 Configure Methods ==
850 850  
851 851  
852 -SN50v3-LB supports below configure method:
507 +S31x-LB supports below configure method:
853 853  
854 854  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
855 855  * AT Command via UART Connection : See [[UART Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
856 856  * LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
857 857  
858 -
859 859  == 3.2 General Commands ==
860 860  
861 861  
... ... @@ -869,10 +869,10 @@
869 869  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
870 870  
871 871  
872 -== 3.3 Commands special design for SN50v3-LB ==
526 +== 3.3 Commands special design for S31x-LB ==
873 873  
874 874  
875 -These commands only valid for SN50v3-LB, as below:
529 +These commands only valid for S31x-LB, as below:
876 876  
877 877  
878 878  === 3.3.1 Set Transmit Interval Time ===
... ... @@ -883,7 +883,7 @@
883 883  (% style="color:blue" %)**AT Command: AT+TDC**
884 884  
885 885  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
886 -|=(% style="width: 156px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="background-color:#D9E2F3;color:#0070C0" %)**Response**
540 +|=(% style="width: 156px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3" %)**Function**|=(% style="background-color:#D9E2F3" %)**Response**
887 887  |(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
888 888  30000
889 889  OK
... ... @@ -903,168 +903,122 @@
903 903  * Example 1: Downlink Payload: 0100001E  ~/~/  Set Transmit Interval (TDC) = 30 seconds
904 904  * Example 2: Downlink Payload: 0100003C  ~/~/  Set Transmit Interval (TDC) = 60 seconds
905 905  
906 -
907 907  === 3.3.2 Get Device Status ===
908 908  
909 909  
910 -Send a LoRaWAN downlink to ask the device to send its status.
563 +Send a LoRaWAN downlink to ask device send Alarm settings.
911 911  
912 -(% style="color:blue" %)**Downlink Payload: 0x26 01**
565 +(% style="color:blue" %)**Downlink Payload:  **(%%)0x26 01
913 913  
914 -Sensor will upload Device Status via **FPORT=5**. See payload section for detail.
567 +Sensor will upload Device Status via FPORT=5. See payload section for detail.
915 915  
916 916  
917 -=== 3.3.3 Set Interrupt Mode ===
570 +=== 3.3.3 Set Temperature Alarm Threshold ===
918 918  
572 +* (% style="color:blue" %)**AT Command:**
919 919  
920 -Feature, Set Interrupt mode for GPIO_EXIT.
574 +(% style="color:#037691" %)**AT+SHTEMP=min,max**
921 921  
922 -(% style="color:blue" %)**AT Command: AT+INTMOD1，AT+INTMOD2，AT+INTMOD3**
576 +* When min=0, and max≠0, Alarm higher than max
577 +* When min≠0, and max=0, Alarm lower than min
578 +* When min≠0 and max≠0, Alarm higher than max or lower than min
923 923  
924 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
925 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
926 -|(% style="width:154px" %)AT+INTMOD1=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
927 -0
928 -OK
929 -the mode is 0 =Disable Interrupt
930 -)))
931 -|(% style="width:154px" %)AT+INTMOD1=2|(% style="width:196px" %)(((
932 -Set Transmit Interval
933 -0. (Disable Interrupt),
934 -~1. (Trigger by rising and falling edge)
935 -2. (Trigger by falling edge)
936 -3. (Trigger by rising edge)
937 -)))|(% style="width:157px" %)OK
938 -|(% style="width:154px" %)AT+INTMOD2=3|(% style="width:196px" %)(((
939 -Set Transmit Interval
940 -trigger by rising edge.
941 -)))|(% style="width:157px" %)OK
942 -|(% style="width:154px" %)AT+INTMOD3=0|(% style="width:196px" %)Disable Interrupt|(% style="width:157px" %)OK
580 +Example:
943 943  
944 -(% style="color:blue" %)**Downlink Command: 0x06**
582 + AT+SHTEMP=0,30   ~/~/ Alarm when temperature higher than 30.
945 945  
946 -Format: Command Code (0x06) followed by 3 bytes.
584 +* (% style="color:blue" %)**Downlink Payload:**
947 947  
948 -This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
586 +(% style="color:#037691" %)**0x(0C 01 00 1E)**  (%%) ~/~/ Set AT+SHTEMP=0,30
949 949  
950 -* Example 1: Downlink Payload: 06000000  **~-~-->**  AT+INTMOD1=0
951 -* Example 2: Downlink Payload: 06000003  **~-~-->**  AT+INTMOD1=3
952 -* Example 3: Downlink Payload: 06000102  **~-~-->**  AT+INTMOD2=2
953 -* Example 4: Downlink Payload: 06000201  **~-~-->**  AT+INTMOD3=1
588 +(% style="color:red" %)**(note: 3^^rd^^ byte= 0x00 for low limit(not set), 4^^th^^ byte = 0x1E for high limit: 30)**
954 954  
955 955  
956 -=== 3.3.4 Set Power Output Duration ===
591 +=== 3.3.4 Set Humidity Alarm Threshold ===
957 957  
593 +* (% style="color:blue" %)**AT Command:**
958 958  
959 -Control the output duration 5V . Before each sampling, device will
595 +(% style="color:#037691" %)**AT+SHHUM=min,max**
960 960  
961 -~1. first enable the power output to external sensor,
597 +* When min=0, and max≠0, Alarm higher than max
598 +* When min≠0, and max=0, Alarm lower than min
599 +* When min≠0 and max≠0, Alarm higher than max or lower than min
962 962  
963 -2. keep it on as per duration, read sensor value and construct uplink payload
601 +Example:
964 964  
965 -3. final, close the power output.
603 + AT+SHHUM=70,0  ~/~/ Alarm when humidity lower than 70%.
966 966  
967 -(% style="color:blue" %)**AT Command: AT+5VT**
605 +* (% style="color:blue" %)**Downlink Payload:**
968 968  
969 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
970 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
971 -|(% style="width:154px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:157px" %)(((
972 -500(default)
973 -OK
974 -)))
975 -|(% style="width:154px" %)AT+5VT=1000|(% style="width:196px" %)(((
976 -Close after a delay of 1000 milliseconds.
977 -)))|(% style="width:157px" %)OK
607 +(% style="color:#037691" %)**0x(0C 02 46 00)**(%%)  ~/~/ Set AT+SHTHUM=70,0
978 978  
979 -(% style="color:blue" %)**Downlink Command: 0x07**
609 +(% style="color:red" %)**(note: 3^^rd^^ byte= 0x46 for low limit (70%), 4^^th^^ byte = 0x00 for high limit (not set))**
980 980  
981 -Format: Command Code (0x07) followed by 2 bytes.
982 982  
983 -The first and second bytes are the time to turn on.
612 +=== 3.3.5 Set Alarm Interval ===
984 984  
985 -* Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
986 -* Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
614 +The shortest time of two Alarm packet. (unit: min)
987 987  
616 +* (% style="color:blue" %)**AT Command:**
988 988  
989 -=== 3.3.5 Set Weighing parameters ===
618 +(% style="color:#037691" %)**AT+ATDC=30** (%%) ~/~/ The shortest interval of two Alarm packets is 30 minutes, Means is there is an alarm packet uplink, there won't be another one in the next 30 minutes.
990 990  
620 +* (% style="color:blue" %)**Downlink Payload:**
991 991  
992 -Feature: Working mode 5 is effective, weight initialization and weight factor setting of HX711.
622 +(% style="color:#037691" %)**0x(0D 00 1E)**(%%)     **~-~--> ** Set AT+ATDC=0x 00 1E = 30 minutes
993 993  
994 -(% style="color:blue" %)**AT Command: AT+WEIGRE,AT+WEIGAP**
995 995  
996 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
997 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
998 -|(% style="width:154px" %)AT+WEIGRE|(% style="width:196px" %)Weight is initialized to 0.|(% style="width:157px" %)OK
999 -|(% style="width:154px" %)AT+WEIGAP=？|(% style="width:196px" %)400.0|(% style="width:157px" %)OK(default)
1000 -|(% style="width:154px" %)AT+WEIGAP=400.3|(% style="width:196px" %)Set the factor to 400.3.|(% style="width:157px" %)OK
625 +=== 3.3.6 Get Alarm settings ===
1001 1001  
1002 -(% style="color:blue" %)**Downlink Command: 0x08**
1003 1003  
1004 -Format: Command Code (0x08) followed by 2 bytes or 4 bytes.
628 +Send a LoRaWAN downlink to ask device send Alarm settings.
1005 1005  
1006 -Use AT+WEIGRE when the first byte is 1, only 1 byte. When it is 2, use AT+WEIGAP, there are 3 bytes.
630 +* (% style="color:#037691" %)**Downlink Payload:  **(%%)0x0E 01
1007 1007  
1008 -The second and third bytes are multiplied by 10 times to be the AT+WEIGAP value.
632 +**Example:**
1009 1009  
1010 -* Example 1: Downlink Payload: 0801  **~-~-->**  AT+WEIGRE
1011 -* Example 2: Downlink Payload: 08020FA3  **~-~-->**  AT+WEIGAP=400.3
1012 -* Example 3: Downlink Payload: 08020FA0  **~-~-->**  AT+WEIGAP=400.0
634 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/1655948182791-225.png?rev=1.1||alt="1655948182791-225.png"]]
1013 1013  
1014 1014  
1015 -=== 3.3.6 Set Digital pulse count value ===
637 +**Explain:**
1016 1016  
639 +* Alarm & MOD bit is 0x7C, 0x7C >> 2 = 0x31: Means this message is the Alarm settings message.
1017 1017  
1018 -Feature: Set the pulse count value.
641 +=== 3.3.7 Set Interrupt Mode ===
1019 1019  
1020 -Count 1 is PA8 pin of mode 6 and mode 9. Count 2 is PA4 pin of mode 9.
1021 1021  
1022 -(% style="color:blue" %)**AT Command: AT+SETCNT**
644 +Feature, Set Interrupt mode for GPIO_EXIT.
1023 1023  
1024 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1025 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1026 -|(% style="width:154px" %)AT+SETCNT=1,100|(% style="width:196px" %)Initialize the count value 1 to 100.|(% style="width:157px" %)OK
1027 -|(% style="width:154px" %)AT+SETCNT=2,0|(% style="width:196px" %)Initialize the count value 2 to 0.|(% style="width:157px" %)OK
646 +(% style="color:blue" %)**AT Command: AT+INTMOD**
1028 1028  
1029 -(% style="color:blue" %)**Downlink Command: 0x09**
1030 -
1031 -Format: Command Code (0x09) followed by 5 bytes.
1032 -
1033 -The first byte is to select which count value to initialize, and the next four bytes are the count value to be initialized.
1034 -
1035 -* Example 1: Downlink Payload: 090100000000  **~-~-->**  AT+SETCNT=1,0
1036 -* Example 2: Downlink Payload: 0902000003E8  **~-~-->**  AT+SETCNT=2,1000
1037 -
1038 -
1039 -=== 3.3.7 Set Workmode ===
1040 -
1041 -
1042 -Feature: Switch working mode.
1043 -
1044 -(% style="color:blue" %)**AT Command: AT+MOD**
1045 -
1046 1046  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1047 -|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1048 -|(% style="width:154px" %)AT+MOD=?|(% style="width:196px" %)Get the current working mode.|(% style="width:157px" %)(((
649 +|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
650 +|(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
651 +0
1049 1049  OK
653 +the mode is 0 =Disable Interrupt
1050 1050  )))
1051 -|(% style="width:154px" %)AT+MOD=4|(% style="width:196px" %)Set the working mode to 3DS18B20s.|(% style="width:157px" %)(((
1052 -OK
1053 -Attention:Take effect after ATZ
1054 -)))
655 +|(% style="width:154px" %)AT+INTMOD=2|(% style="width:196px" %)(((
656 +Set Transmit Interval
657 +0. (Disable Interrupt),
658 +~1. (Trigger by rising and falling edge)
659 +2. (Trigger by falling edge)
660 +3. (Trigger by rising edge)
661 +)))|(% style="width:157px" %)OK
1055 1055  
1056 -(% style="color:blue" %)**Downlink Command: 0x0A**
663 +(% style="color:blue" %)**Downlink Command: 0x06**
1057 1057  
1058 -Format: Command Code (0x0A) followed by 1 bytes.
665 +Format: Command Code (0x06) followed by 3 bytes.
1059 1059  
1060 -* Example 1: Downlink Payload: 0A01  **~-~-->**  AT+MOD=1
1061 -* Example 2: Downlink Payload: 0A04  **~-~-->**  AT+MOD=4
667 +This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
1062 1062  
669 +* Example 1: Downlink Payload: 06000000  ~/~/  Turn off interrupt mode
670 +* Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
1063 1063  
1064 1064  = 4. Battery & Power Consumption =
1065 1065  
1066 1066  
1067 -SN50v3-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
675 +S31x-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
1068 1068  
1069 1069  [[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
1070 1070  
... ... @@ -1073,45 +1073,24 @@
1073 1073  
1074 1074  
1075 1075  (% class="wikigeneratedid" %)
1076 -**User can change firmware SN50v3-LB to:**
684 +User can change firmware S31x-LB to:
1077 1077  
1078 1078  * Change Frequency band/ region.
1079 1079  * Update with new features.
1080 1080  * Fix bugs.
1081 1081  
1082 -**Firmware and changelog can be downloaded from :** **[[Firmware download link>>https://www.dropbox.com/sh/4rov7bcp6u28exp/AACt-wAySd4si5AXi8DBmvSca?dl=0]]**
690 +Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/kwqv57tp6pejias/AAAopYMATh1GM6fZ-VRCLrpDa?dl=0]]**
1083 1083  
1084 -**Methods to Update Firmware:**
1085 1085  
1086 -* (Recommanded way) OTA firmware update via wireless: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**
1087 -* Update through UART TTL interface: **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
693 +Methods to Update Firmware:
1088 1088  
695 +* (Recommanded way) OTA firmware update via wireless:   [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
696 +* Update through UART TTL interface.**[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
1089 1089  
1090 1090  = 6. FAQ =
1091 1091  
1092 -== 6.1 Where can i find source code of SN50v3-LB? ==
1093 1093  
1094 1094  
1095 -* **[[Hardware Source Files>>https://github.com/dragino/Lora/tree/master/LSN50/v3.0]].**
1096 -* **[[Software Source Code & Compile instruction>>https://github.com/dragino/SN50v3]].**
1097 -
1098 -
1099 -== 6.2 How to generate PWM Output in SN50v3-LB? ==
1100 -
1101 -
1102 -See this document: **[[Generate PWM Output on SN50v3>>https://www.dropbox.com/scl/fi/r3trcet2knujg40w0mgyn/Generate-PWM-Output-on-SN50v3.pdf?rlkey=rxsgmrhhrv62iiiwjq9sv10bn&dl=0]]**.
1103 -
1104 -
1105 -== 6.3 How to put several sensors to a SN50v3-LB? ==
1106 -
1107 -
1108 -When we want to put several sensors to A SN50v3-LB, the waterproof at the grand connector will become an issue. User can try to exchange the grand connector to below type.
1109 -
1110 -[[Reference Supplier>>https://www.yscableglands.com/cable-glands/nylon-cable-glands/cable-gland-rubber-seal.html]].
1111 -
1112 -[[image:image-20230810121434-1.png||height="242" width="656"]]
1113 -
1114 -
1115 1115  = 7. Order Info =
1116 1116  
1117 1117  
... ... @@ -1118,7 +1118,6 @@
1118 1118  Part Number: (% style="color:blue" %)**SN50v3-LB-XX-YY**
1119 1119  
1120 1120  (% style="color:red" %)**XX**(%%): The default frequency band
1121 -
1122 1122  * (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
1123 1123  * (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
1124 1124  * (% style="color:red" %)**EU433**(%%): LoRaWAN EU433 band
... ... @@ -1135,10 +1135,8 @@
1135 1135  * (% style="color:red" %)**20**(%%): With M20 waterproof cable hole
1136 1136  * (% style="color:red" %)**NH**(%%): No Hole
1137 1137  
1138 -
1139 1139  = 8. ​Packing Info =
1140 1140  
1141 -
1142 1142  (% style="color:#037691" %)**Package Includes**:
1143 1143  
1144 1144  * SN50v3-LB LoRaWAN Generic Node
... ... @@ -1154,5 +1154,4 @@
1154 1154  
1155 1155  
1156 1156  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1157 -
1158 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.cc>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.cc]]
741 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
image-20230512163509-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -1.5 MB
Content
image-20230512164658-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -2.0 MB
Content
image-20230512170701-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -2.5 MB
Content
image-20230512172447-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -2.0 MB
Content
image-20230512173758-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -2.1 MB
Content
image-20230512173903-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -2.3 MB
Content
image-20230512180609-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -2.3 MB
Content
image-20230512180718-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -2.3 MB
Content
image-20230512181814-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -2.2 MB
Content
image-20230513084523-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -611.3 KB
Content
image-20230513102034-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -607.1 KB
Content
image-20230513103633-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -595.5 KB
Content
image-20230513105207-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -384.7 KB
Content
image-20230513105351-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -37.6 KB
Content
image-20230513110214-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -172.7 KB
Content
image-20230513111203-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -79.9 KB
Content
image-20230513111231-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -64.9 KB
Content
image-20230513111255-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -70.4 KB
Content
image-20230513134006-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -1.9 MB
Content
image-20230515135611-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -948.0 KB
Content
image-20230610162852-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -695.7 KB
Content
image-20230610163213-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -695.4 KB
Content
image-20230610170047-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -444.9 KB
Content
image-20230610170152-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -359.5 KB
Content
image-20230810121434-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -137.3 KB
Content
image-20230811113449-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -973.1 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0