Changes for page SN50v3-LB/LS -- LoRaWAN Sensor Node User Manual

Last modified by Bei Jinggeng on 2025/01/10 15:51

From version < 53.1 >

edited by Saxer Lin
on 2023/06/14 11:28

To version < 78.1 >

edited by Mengting Qiu
on 2023/12/13 10:24

Change comment: Uploaded new attachment "image-20231213102404-1.jpeg", version {1}

Raw
Rendered

Summary

Page properties (2 modified, 0 added, 0 removed)
Attachments (0 modified, 12 added, 0 removed)

Details

Page properties

Author

@@ -1,1 +1,1 @@
--XWiki.Saxer
++XWiki.ting

Content

@@ -19,7 +19,7 @@
  (% style="color:blue" %)**SN50V3-LB **(%%)LoRaWAN Sensor Node is a Long Range LoRa Sensor Node. It is designed for outdoor use and powered by (% style="color:blue" %)** 8500mA Li/SOCl2 battery**(%%) for long term use.SN50V3-LB is designed to facilitate developers to quickly deploy industrial level LoRa and IoT solutions. It help users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to program, create and connect your things everywhere.
--(% style="color:blue" %)**SN50V3-LB wireless part**(%%) is based on SX1262 allows the user to send data and reach extremely long ranges at low data-rates.It provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, and so on.
++(% style="color:blue" %)**SN50V3-LB wireless part**(%%) is based on SX1262 allows the user to send data and reach extremely long ranges at low data-rates.It provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, and so on.
  (% style="color:blue" %)**SN50V3-LB **(%%)has a powerful 48Mhz ARM microcontroller with 256KB flash and 64KB RAM. It has multiplex I/O pins to connect to different sensors.
@@ -27,7 +27,6 @@
  SN50V3-LB is the 3^^rd^^ generation of LSN50 series generic sensor node from Dragino. It is an (% style="color:blue" %)**open source project**(%%) and has a mature LoRaWAN stack and application software. User can use the pre-load software for their IoT projects or easily customize the software for different requirements.
--
  == 1.2 Features ==
@@ -41,7 +41,6 @@
  * Downlink to change configure
  * 8500mAh Battery for long term use
--
  == 1.3 Specification ==
@@ -79,7 +79,6 @@
  * Sleep Mode: 5uA @ 3.3v
  * LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
--
  == 1.4 Sleep mode and working mode ==
@@ -107,7 +107,6 @@
  )))
  |(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
--
  == 1.6 BLE connection ==
@@ -230,33 +230,33 @@
  (% style="color:#037691" %)**Frequency Band**:
--*0x01: EU868
++0x01: EU868
--*0x02: US915
++0x02: US915
--*0x03: IN865
++0x03: IN865
--*0x04: AU915
++0x04: AU915
--*0x05: KZ865
++0x05: KZ865
--*0x06: RU864
++0x06: RU864
--*0x07: AS923
++0x07: AS923
--*0x08: AS923-1
++0x08: AS923-1
--*0x09: AS923-2
++0x09: AS923-2
--*0x0a: AS923-3
++0x0a: AS923-3
--*0x0b: CN470
++0x0b: CN470
--*0x0c: EU433
++0x0c: EU433
--*0x0d: KR920
++0x0d: KR920
--*0x0e: MA869
++0x0e: MA869
  (% style="color:#037691" %)**Sub-Band**:
@@ -332,9 +332,8 @@
  )))|(% style="width:189px" %)(((
  Digital in(PB15) & Digital Interrupt(PA8)
  )))|(% style="width:208px" %)(((
--Distance measure by:1) LIDAR-Lite V3HP
--Or
--2) Ultrasonic Sensor
++Distance measure by: 1) LIDAR-Lite V3HP
++Or 2) Ultrasonic Sensor
  )))|(% style="width:117px" %)Reserved
  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656324539647-568.png?rev=1.1||alt="1656324539647-568.png"]]
@@ -364,8 +364,7 @@
  ADC(PA4)
  )))|(% style="width:323px" %)(((
  Distance measure by:1)TF-Mini plus LiDAR
--Or
--2) TF-Luna LiDAR
++Or 2) TF-Luna LiDAR
  )))|(% style="width:188px" %)Distance signal  strength
  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656376779088-686.png?rev=1.1||alt="1656376779088-686.png"]]
@@ -472,7 +472,6 @@
  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220820120036-2.png?width=1003&height=469&rev=1.1||alt="image-20220820120036-2.png" height="469" width="1003"]]
--
  ==== 2.3.2.6  MOD~=6 (Counting Mode) ====
@@ -585,6 +585,87 @@
  When AA is 2, set the count of PA4 pin to BB    Corresponding downlink：09 02 bb bb bb bb
++==== 2.3.2.10  MOD~=10 (PWM input capture and output mode，Since firmware v1.2) ====
++
++(% style="color:red" %)**Note: Firmware not release, contact Dragino for testing.**
++
++In this mode, the uplink can perform PWM input capture, and the downlink can perform PWM output.
++
++[[It should be noted when using PWM mode.>>||anchor="H2.3.3.12A0PWMMOD"]]
++
++
++===== 2.3.2.10.a  Uplink, PWM input capture =====
++
++
++[[image:image-20230817172209-2.png||height="439" width="683"]]
++
++(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:690px" %)
++|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:20px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:135px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:70px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:89px" %)**2**
++|Value|Bat|(% style="width:191px" %)(((
++Temperature(DS18B20)(PC13)
++)))|(% style="width:78px" %)(((
++ADC(PA4)
++)))|(% style="width:135px" %)(((
++PWM_Setting
++
++&Digital Interrupt(PA8)
++)))|(% style="width:70px" %)(((
++Pulse period
++)))|(% style="width:89px" %)(((
++Duration of high level
++)))
++
++[[image:image-20230817170702-1.png||height="161" width="1044"]]
++
++
++When the device detects the following PWM signal ,decoder will converts the pulse period and high-level duration to frequency and duty cycle.
++
++**Frequency：**
++
++(% class="MsoNormal" %)
++(% lang="EN-US" %)If (% style="background-attachment:initial; background-clip:initial; background-image:initial; background-origin:initial; background-position:initial; background-repeat:initial; background-size:initial; color:blue; font-family:Arial,sans-serif" %)**AT+PWMSET**(%%)**=0, **(% lang="EN-US" %)Frequency= 1000000/(%%)Pulse period（HZ）;
++
++(% class="MsoNormal" %)
++(% lang="EN-US" %)If (% style="background-attachment:initial; background-clip:initial; background-image:initial; background-origin:initial; background-position:initial; background-repeat:initial; background-size:initial; color:blue; font-family:Arial,sans-serif" %)**AT+PWMSET**(%%)**=1, **(% lang="EN-US" %)Frequency= 1000/(%%)Pulse period（HZ）;
++
++
++(% class="MsoNormal" %)
++**Duty cycle:**
++
++Duty cycle= Duration of high level/ Pulse period*100 ~(%).
++
++[[image:image-20230818092200-1.png||height="344" width="627"]]
++
++===== 2.3.2.10.b  Uplink, PWM output =====
++
++[[image:image-20230817172209-2.png||height="439" width="683"]]
++
++
++
++
++
++
++===== 2.3.2.10.c  Downlink, PWM output =====
++
++
++[[image:image-20230817173800-3.png||height="412" width="685"]]
++
++Downlink:   (% style="color:#037691" %)**0B xx xx xx yy zz zz**
++
++                   xx xx xx is the output frequency, the unit is HZ.
++
++                   yy is the duty cycle of the output, the unit is %.
++
++                   zz zz is the time delay of the output, the unit is ms.
++
++
++For example, send a downlink command: 0B 00 61 A8 32 13 88, the frequency is 25KHZ, the duty cycle is 50, and the output time is 5 seconds.
++
++The oscilloscope displays as follows:
++
++[[image:image-20230817173858-5.png||height="694" width="921"]]
++
++
  === 2.3.3  Decode payload ===
@@ -658,6 +658,10 @@
  (% style="color:red" %)**Note: If the ADC type sensor needs to be powered by SN50_v3, it is recommended to use +5V to control its switch.Only sensors with low power consumption can be powered with VDD.**
++The position of PA5 on the hardware after **LSN50 v3.3** is changed to the position shown in the figure below, and the collected voltage becomes one-sixth of the original.
++
++[[image:image-20230811113449-1.png||height="370" width="608"]]
++
  ==== 2.3.3.5  Digital Interrupt ====
@@ -804,9 +804,40 @@
  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220628110012-12.png?rev=1.1||alt="image-20220628110012-12.png" height="361" width="953"]]
--==== 2.3.3.12  Working MOD ====
++==== 2.3.3.12  PWM MOD ====
++* (((
++The maximum voltage that the SDA pin of SN50v3 can withstand is 3.6V, and it cannot exceed this voltage value, otherwise the chip may be burned.
++)))
++* (((
++If the PWM pin connected to the SDA pin cannot maintain a high level when it is not working, you need to remove the resistor R2 or replace it with a resistor with a larger resistance, otherwise a sleep current of about 360uA will be generated. The position of the resistor is shown in the figure below:
++)))
++
++      [[image:image-20230817183249-3.png||height="320" width="417"]]
++
++* (((
++The signal captured by the input should preferably be processed by hardware filtering and then connected in. The software processing method is to capture four values, discard the first captured value, and then take the middle value of the second, third, and fourth captured values.
++)))
++* (((
++Since the device can only detect a pulse period of 50ms when [[AT+PWMSET=0>>||anchor="H3.3.8PWMsetting"]] (counting in microseconds), it is necessary to change the value of PWMSET according to the frequency of input capture.
++)))
++* (((
++PWM Input allows low power consumption. PWM Output to achieve real-time control, you need to go to class C. Power consumption will not be low.
++
++For PWM Output Feature, there are two consideration to see if the device can be powered by battery or have to be powered by external DC.
++
++a) If real-time control output is required, the SN50v3-LB is already operating in class C and an external power supply must be used.
++
++b) If the output duration is more than 30 seconds, better to use external power source.
++
++
++
++)))
++
++==== 2.3.3.13  Working MOD ====
++
++
  The working MOD info is contained in the Digital in & Digital Interrupt byte (7^^th^^ Byte).
  User can use the 3^^rd^^ ~~ 7^^th^^   bit of this byte to see the working mod:
@@ -822,8 +822,8 @@
  * 6: MOD7
  * 7: MOD8
  * 8: MOD9
++* 9: MOD10
--
  == 2.4 Payload Decoder file ==
@@ -853,7 +853,6 @@
  * AT Command via UART Connection : See [[UART Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
  * LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
--
  == 3.2 General Commands ==
@@ -901,7 +901,6 @@
  * Example 1: Downlink Payload: 0100001E       ~/~/  Set Transmit Interval (TDC) = 30 seconds
  * Example 2: Downlink Payload: 0100003C       ~/~/  Set Transmit Interval (TDC) = 60 seconds
--
  === 3.3.2 Get Device Status ===
@@ -950,7 +950,6 @@
  * Example 3: Downlink Payload: 06000102      **~-~-->**  AT+INTMOD2=2
  * Example 4: Downlink Payload: 06000201      **~-~-->**  AT+INTMOD3=1
--
  === 3.3.4 Set Power Output Duration ===
@@ -983,7 +983,6 @@
  * Example 1: Downlink Payload: 070000     **~-~-->**   AT+5VT=0
  * Example 2: Downlink Payload: 0701F4      **~-~-->**  AT+5VT=500
--
  === 3.3.5 Set Weighing parameters ===
@@ -1009,7 +1009,6 @@
  * Example 2: Downlink Payload: 08020FA3  **~-~-->**   AT+WEIGAP=400.3
  * Example 3: Downlink Payload: 08020FA0  **~-~-->**   AT+WEIGAP=400.0
--
  === 3.3.6 Set Digital pulse count value ===
@@ -1033,7 +1033,6 @@
  * Example 1: Downlink Payload: 090100000000  **~-~-->**   AT+SETCNT=1,0
  * Example 2: Downlink Payload: 0902000003E8  **~-~-->**   AT+SETCNT=2,1000
--
  === 3.3.7 Set Workmode ===
@@ -1058,10 +1058,101 @@
  * Example 1: Downlink Payload: 0A01      **~-~-->**   AT+MOD=1
  * Example 2: Downlink Payload: 0A04      **~-~-->**   AT+MOD=4
++(% id="H3.3.8PWMsetting" %)
++=== 3.3.8 PWM setting ===
--= 4. Battery & Power Consumption =
++(% class="mark" %)Feature: Set the time acquisition unit for PWM input capture.
++(% style="color:blue" %)**AT Command: AT+PWMSET**
++
++(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
++|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 223px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Function**|=(% style="width: 130px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Response**
++|(% style="width:154px" %)AT+PWMSET=?|(% style="width:223px" %)0|(% style="width:130px" %)(((
++0(default)
++
++OK
++)))
++|(% style="width:154px" %)AT+PWMSET=0|(% style="width:223px" %)The unit of PWM capture time is microsecond. The capture frequency range is between 20HZ and 100000HZ.   |(% style="width:130px" %)(((
++OK
++
++)))
++|(% style="width:154px" %)AT+PWMSET=1|(% style="width:223px" %)The unit of PWM capture time is millisecond.   The capture frequency range is between 5HZ and 250HZ. |(% style="width:130px" %)OK
++
++(% style="color:blue" %)**Downlink Command: 0x0C**
++
++Format: Command Code (0x0C) followed by 1 bytes.
++
++* Example 1: Downlink Payload: 0C00      **~-~-->**   AT+PWMSET=0
++* Example 2: Downlink Payload: 0C01      **~-~-->**   AT+PWMSET=1
++
++
++
++(% class="mark" %)Feature: Set the time acquisition unit for PWM output.
++
++(% style="color:blue" %)**AT Command: AT+PWMOUT**
++
++(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
++|=(% style="width: 183px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Command Example**|=(% style="width: 193px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Function**|=(% style="width: 137px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Response**
++|(% style="width:183px" %)AT+PWMOUT=?|(% style="width:193px" %)0|(% style="width:137px" %)(((
++0,0,0(default)
++
++OK
++)))
++|(% style="width:183px" %)AT+PWMOUT=0,0,0|(% style="width:193px" %)The default is PWM input detection|(% style="width:137px" %)(((
++OK
++
++)))
++|(% style="width:183px" %)AT+PWMOUT=5,1000,50|(% style="width:193px" %)(((
++The PWM output time is 5ms, the output frequency is 1000HZ, and the output duty cycle is 50%.
++
++
++)))|(% style="width:137px" %)(((
++OK
++)))
++
++(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
++|=(% style="width: 155px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Command Example**|=(% style="width: 112px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Function**|=(% style="width: 242px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**parameters**
++|(% colspan="1" rowspan="3" style="width:155px" %)(((
++AT+PWMOUT=a,b,c
++
++
++)))|(% colspan="1" rowspan="3" style="width:112px" %)(((
++Set PWM output time, output frequency and output duty cycle.(((
++
++)))
++
++(((
++
++)))
++)))|(% style="width:242px" %)(((
++a: Output time (unit: seconds)
++
++The value ranges from 0 to 65535.
++
++When a=65535, PWM will always output.
++)))
++|(% style="width:242px" %)(((
++b: Output frequency (unit: HZ)
++)))
++|(% style="width:242px" %)(((
++c: Output duty cycle (unit: %)
++
++The value ranges from 0 to 100.
++)))
++
++(% style="color:blue" %)**Downlink Command: 0x0B01**
++
++Format: Command Code (0x0B01) followed by 6 bytes.
++
++Downlink payload：0B01 bb cc aa **~-~--> **AT+PWMOUT=a,b,c
++
++* Example 1: Downlink Payload: 0B01 03E8 0032 0005 **~-~-->**   AT+PWMSET=5,1000,50
++* Example 2: Downlink Payload: 0B01 07D0 003C 000A **~-~-->**   AT+PWMSET=10,2000,60
++
++= 4. Battery & Power Cons  =
++
++
  SN50v3-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
  [[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
@@ -1081,10 +1081,9 @@
  **Methods to Update Firmware:**
--* (Recommanded way) OTA firmware update via wireless:   [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
--* Update through UART TTL interface.**[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
++* (Recommanded way) OTA firmware update via wireless: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**
++* Update through UART TTL interface: **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
--
  = 6. FAQ =
  == 6.1 Where can i find source code of SN50v3-LB? ==
@@ -1093,7 +1093,22 @@
  * **[[Hardware Source Files>>https://github.com/dragino/Lora/tree/master/LSN50/v3.0]].**
  * **[[Software Source Code & Compile instruction>>https://github.com/dragino/SN50v3]].**
++== 6.2 How to generate PWM Output in SN50v3-LB? ==
++
++See this document: **[[Generate PWM Output on SN50v3>>https://www.dropbox.com/scl/fi/r3trcet2knujg40w0mgyn/Generate-PWM-Output-on-SN50v3.pdf?rlkey=rxsgmrhhrv62iiiwjq9sv10bn&dl=0]]**.
++
++
++== 6.3 How to put several sensors to a SN50v3-LB? ==
++
++
++When we want to put several sensors to A SN50v3-LB, the waterproof at the grand connector will become an issue. User can try to exchange the grand connector to below type.
++
++[[Reference Supplier>>https://www.yscableglands.com/cable-glands/nylon-cable-glands/cable-gland-rubber-seal.html]].
++
++[[image:image-20230810121434-1.png||height="242" width="656"]]
++
++
  = 7. Order Info =
@@ -1117,7 +1117,6 @@
  * (% style="color:red" %)**20**(%%): With M20 waterproof cable hole
  * (% style="color:red" %)**NH**(%%): No Hole
--
  = 8. Packing Info =
@@ -1132,7 +1132,6 @@
  * Package Size / pcs : cm
  * Weight / pcs : g
--
  = 9. Support =

image-20230810121434-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Edwin

Size

...	...	@@ -1,0 +1,1 @@
	1	+137.3 KB

Content

image-20230811113449-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Saxer

Size

...	...	@@ -1,0 +1,1 @@
	1	+973.1 KB

Content

image-20230817170702-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Saxer

Size

...	...	@@ -1,0 +1,1 @@
	1	+39.6 KB

Content

image-20230817172209-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Saxer

Size

...	...	@@ -1,0 +1,1 @@
	1	+1.3 MB

Content

image-20230817173800-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Saxer

Size

...	...	@@ -1,0 +1,1 @@
	1	+1.1 MB

Content

image-20230817173830-4.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Saxer

Size

...	...	@@ -1,0 +1,1 @@
	1	+508.5 KB

Content

image-20230817173858-5.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Saxer

Size

...	...	@@ -1,0 +1,1 @@
	1	+1.6 MB

Content

image-20230817183137-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Saxer

Size

...	...	@@ -1,0 +1,1 @@
	1	+137.1 KB

Content

image-20230817183218-2.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Saxer

Size

...	...	@@ -1,0 +1,1 @@
	1	+137.1 KB

Content

image-20230817183249-3.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Saxer

Size

...	...	@@ -1,0 +1,1 @@
	1	+948.6 KB

Content

image-20230818092200-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Saxer

Size

...	...	@@ -1,0 +1,1 @@
	1	+98.9 KB

Content

image-20231213102404-1.jpeg

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.ting

Size

...	...	@@ -1,0 +1,1 @@
	1	+4.2 MB

Content

Changes for page SN50v3-LB/LS -- LoRaWAN Sensor Node User Manual

Summary

Details

Applications

Navigation