Last modified by Bei Jinggeng on 2025/01/10 15:51
<
From version < 43.45 >
edited by Xiaoling
on 2023/05/16 15:37
To version < 39.1 >
edited by Saxer Lin
on 2023/05/13 13:40
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -SN50v3-LB LoRaWAN Sensor Node User Manual
1 +SN50v3-LB User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Saxer
Content
... ... @@ -1,5 +1,4 @@
1 -(% style="text-align:center" %)
2 -[[image:image-20230515135611-1.jpeg||height="589" width="589"]]
1 +[[image:image-20230511201248-1.png||height="403" width="489"]]
3 3  
4 4  
5 5  
... ... @@ -16,21 +16,23 @@
16 16  
17 17  == 1.1 What is SN50v3-LB LoRaWAN Generic Node ==
18 18  
19 -
20 20  (% style="color:blue" %)**SN50V3-LB **(%%)LoRaWAN Sensor Node is a Long Range LoRa Sensor Node. It is designed for outdoor use and powered by (% style="color:blue" %)** 8500mA Li/SOCl2 battery**(%%) for long term use.SN50V3-LB is designed to facilitate developers to quickly deploy industrial level LoRa and IoT solutions. It help users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to program, create and connect your things everywhere.
21 21  
20 +
22 22  (% style="color:blue" %)**SN50V3-LB wireless part**(%%) is based on SX1262 allows the user to send data and reach extremely long ranges at low data-rates.It provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, and so on.
23 23  
23 +
24 24  (% style="color:blue" %)**SN50V3-LB **(%%)has a powerful 48Mhz ARM microcontroller with 256KB flash and 64KB RAM. It has multiplex I/O pins to connect to different sensors.
25 25  
26 +
26 26  (% style="color:blue" %)**SN50V3-LB**(%%) has a built-in BLE module, user can configure the sensor remotely via Mobile Phone. It also support OTA upgrade via private LoRa protocol for easy maintaining.
27 27  
29 +
28 28  SN50V3-LB is the 3^^rd^^ generation of LSN50 series generic sensor node from Dragino. It is an (% style="color:blue" %)**open source project**(%%) and has a mature LoRaWAN stack and application software. User can use the pre-load software for their IoT projects or easily customize the software for different requirements.
29 29  
30 30  
31 31  == 1.2 ​Features ==
32 32  
33 -
34 34  * LoRaWAN 1.0.3 Class A
35 35  * Ultra-low power consumption
36 36  * Open-Source hardware/software
... ... @@ -41,11 +41,8 @@
41 41  * Downlink to change configure
42 42  * 8500mAh Battery for long term use
43 43  
44 -
45 -
46 46  == 1.3 Specification ==
47 47  
48 -
49 49  (% style="color:#037691" %)**Common DC Characteristics:**
50 50  
51 51  * Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
... ... @@ -80,11 +80,8 @@
80 80  * Sleep Mode: 5uA @ 3.3v
81 81  * LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
82 82  
83 -
84 -
85 85  == 1.4 Sleep mode and working mode ==
86 86  
87 -
88 88  (% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
89 89  
90 90  (% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
... ... @@ -109,8 +109,6 @@
109 109  )))
110 110  |(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
111 111  
112 -
113 -
114 114  == 1.6 BLE connection ==
115 115  
116 116  
... ... @@ -144,7 +144,6 @@
144 144  
145 145  == Hole Option ==
146 146  
147 -
148 148  SN50v3-LB has different hole size options for different size sensor cable. The options provided are M12, M16 and M20. The definition is as below:
149 149  
150 150  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220627104757-1.png?rev=1.1||alt="image-20220627104757-1.png"]]
... ... @@ -296,83 +296,97 @@
296 296  1. All modes share the same Payload Explanation from HERE.
297 297  1. By default, the device will send an uplink message every 20 minutes.
298 298  
299 -
300 -
301 301  ==== 2.3.2.1  MOD~=1 (Default Mode) ====
302 302  
303 -
304 304  In this mode, uplink payload includes in total 11 bytes. Uplink packets use FPORT=2.
305 305  
306 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
307 -|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:20px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:90px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:130px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:90px" %)**2**
308 -|**Value**|Bat|(% style="width:191px" %)(((
309 -Temperature(DS18B20)(PC13)
310 -)))|(% style="width:78px" %)(((
311 -ADC(PA4)
295 +|**Size(bytes)**|**2**|**2**|**2**|(% style="width:216px" %)**1**|(% style="width:342px" %)**2**|(% style="width:171px" %)**2**
296 +|**Value**|Bat|(((
297 +Temperature(DS18B20)
298 +
299 +(PC13)
300 +)))|(((
301 +ADC
302 +
303 +(PA4)
312 312  )))|(% style="width:216px" %)(((
313 -Digital in(PB15)&Digital Interrupt(PA8)
314 -)))|(% style="width:308px" %)(((
315 -Temperature(SHT20 or SHT31 or BH1750 Illumination Sensor)
316 -)))|(% style="width:154px" %)(((
317 -Humidity(SHT20 or SHT31)
305 +Digital in(PB15) &
306 +
307 +Digital Interrupt(PA8)
308 +
309 +
310 +)))|(% style="width:342px" %)(((
311 +Temperature
312 +
313 +(SHT20 or SHT31 or BH1750 Illumination Sensor)
314 +)))|(% style="width:171px" %)(((
315 +Humidity
316 +
317 +(SHT20 or SHT31)
318 318  )))
319 319  
320 320  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220627150949-6.png?rev=1.1||alt="image-20220627150949-6.png"]]
321 321  
322 322  
323 -
324 324  ==== 2.3.2.2  MOD~=2 (Distance Mode) ====
325 325  
326 -
327 327  This mode is target to measure the distance. The payload of this mode is totally 11 bytes. The 8^^th^^ and 9^^th^^ bytes is for the distance.
328 328  
329 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
330 -|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:110px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:110px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:140px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**2**
331 -|**Value**|BAT|(% style="width:196px" %)(((
332 -Temperature(DS18B20)(PC13)
333 -)))|(% style="width:87px" %)(((
334 -ADC(PA4)
335 -)))|(% style="width:189px" %)(((
336 -Digital in(PB15) & Digital Interrupt(PA8)
337 -)))|(% style="width:208px" %)(((
338 -Distance measure by:1) LIDAR-Lite V3HP
339 -Or 2) Ultrasonic Sensor
340 -)))|(% style="width:117px" %)Reserved
327 +|**Size(bytes)**|**2**|**2**|**2**|**1**|**2**|**2**
328 +|**Value**|BAT|(((
329 +Temperature(DS18B20)
341 341  
342 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656324539647-568.png?rev=1.1||alt="1656324539647-568.png"]]
331 +(PC13)
332 +)))|(((
333 +ADC
343 343  
335 +(PA4)
336 +)))|(((
337 +Digital in(PB15) &
344 344  
345 -(% style="color:blue" %)**Connection of LIDAR-Lite V3HP:**
339 +Digital Interrupt(PA8)
340 +)))|(((
341 +Distance measure by:
342 +1) LIDAR-Lite V3HP
343 +Or
344 +2) Ultrasonic Sensor
345 +)))|Reserved
346 346  
347 -[[image:image-20230512173758-5.png||height="563" width="712"]]
347 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656324539647-568.png?rev=1.1||alt="1656324539647-568.png"]]
348 348  
349 +**Connection of LIDAR-Lite V3HP:**
349 349  
350 -(% style="color:blue" %)**Connection to Ultrasonic Sensor:**
351 +[[image:image-20230512173758-5.png||height="563" width="712"]]
351 351  
353 +**Connection to Ultrasonic Sensor:**
354 +
352 352  Need to remove R1 and R2 resistors to get low power,otherwise there will be 240uA standby current.
353 353  
354 354  [[image:image-20230512173903-6.png||height="596" width="715"]]
355 355  
356 -
357 357  For the connection to TF-Mini or TF-Luna , MOD2 payload is as below:
358 358  
359 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
360 -|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:20px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:120px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:80px" %)**2**
361 -|**Value**|BAT|(% style="width:183px" %)(((
362 -Temperature(DS18B20)(PC13)
363 -)))|(% style="width:173px" %)(((
364 -Digital in(PB15) & Digital Interrupt(PA8)
365 -)))|(% style="width:84px" %)(((
366 -ADC(PA4)
367 -)))|(% style="width:323px" %)(((
361 +|**Size(bytes)**|**2**|**2**|**1**|**2**|**2**|**2**
362 +|**Value**|BAT|(((
363 +Temperature(DS18B20)
364 +
365 +(PC13)
366 +)))|(((
367 +Digital in(PB15) &
368 +
369 +Digital Interrupt(PA8)
370 +)))|(((
371 +ADC
372 +
373 +(PA4)
374 +)))|(((
368 368  Distance measure by:1)TF-Mini plus LiDAR
369 369  Or 
370 370  2) TF-Luna LiDAR
371 -)))|(% style="width:188px" %)Distance signal  strength
378 +)))|Distance signal  strength
372 372  
373 373  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656376779088-686.png?rev=1.1||alt="1656376779088-686.png"]]
374 374  
375 -
376 376  **Connection to [[TF-Mini plus>>url:http://en.benewake.com/product/detail/5c345cd0e5b3a844c472329b.html]] LiDAR(UART version):**
377 377  
378 378  Need to remove R3 and R4 resistors to get low power,otherwise there will be 400uA standby current.
... ... @@ -379,7 +379,6 @@
379 379  
380 380  [[image:image-20230512180609-7.png||height="555" width="802"]]
381 381  
382 -
383 383  **Connection to [[TF-Luna>>url:http://en.benewake.com/product/detail/5e1c1fd04d839408076b6255.html]] LiDAR (UART version):**
384 384  
385 385  Need to remove R3 and R4 resistors to get low power,otherwise there will be 400uA standby current.
... ... @@ -389,25 +389,34 @@
389 389  
390 390  ==== 2.3.2.3  MOD~=3 (3 ADC + I2C) ====
391 391  
392 -
393 393  This mode has total 12 bytes. Include 3 x ADC + 1x I2C
394 394  
395 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
396 -|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
399 +(% style="width:1031px" %)
400 +|=(((
397 397  **Size(bytes)**
398 -)))|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 140px;background-color:#D9E2F3;color:#0070C0" %)2|=(% style="width: 120px;background-color:#D9E2F3;color:#0070C0" %)2|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)1
402 +)))|=(% style="width: 68px;" %)**2**|=(% style="width: 75px;" %)**2**|=**2**|=**1**|=(% style="width: 304px;" %)2|=(% style="width: 163px;" %)2|=(% style="width: 53px;" %)1
399 399  |**Value**|(% style="width:68px" %)(((
400 -ADC1(PA4)
404 +ADC1
405 +
406 +(PA4)
401 401  )))|(% style="width:75px" %)(((
402 -ADC2(PA5)
408 +ADC2
409 +
410 +(PA5)
403 403  )))|(((
404 -ADC3(PA8)
412 +ADC3
413 +
414 +(PA8)
405 405  )))|(((
406 406  Digital Interrupt(PB15)
407 407  )))|(% style="width:304px" %)(((
408 -Temperature(SHT20 or SHT31 or BH1750 Illumination Sensor)
418 +Temperature
419 +
420 +(SHT20 or SHT31 or BH1750 Illumination Sensor)
409 409  )))|(% style="width:163px" %)(((
410 -Humidity(SHT20 or SHT31)
422 +Humidity
423 +
424 +(SHT20 or SHT31)
411 411  )))|(% style="width:53px" %)Bat
412 412  
413 413  [[image:image-20230513110214-6.png]]
... ... @@ -418,26 +418,30 @@
418 418  
419 419  This mode has total 11 bytes. As shown below:
420 420  
421 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
422 -|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:20px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**
435 +(% style="width:1017px" %)
436 +|**Size(bytes)**|**2**|(% style="width:186px" %)**2**|(% style="width:82px" %)**2**|(% style="width:210px" %)**1**|(% style="width:191px" %)**2**|(% style="width:183px" %)**2**
423 423  |**Value**|BAT|(% style="width:186px" %)(((
424 -Temperature1(DS18B20)(PC13)
438 +Temperature1(DS18B20)
439 +(PC13)
425 425  )))|(% style="width:82px" %)(((
426 -ADC(PA4)
441 +ADC
442 +
443 +(PA4)
427 427  )))|(% style="width:210px" %)(((
428 -Digital in(PB15) & Digital Interrupt(PA8) 
445 +Digital in(PB15) &
446 +
447 +Digital Interrupt(PA8) 
429 429  )))|(% style="width:191px" %)Temperature2(DS18B20)
430 -(PB9)|(% style="width:183px" %)Temperature3(DS18B20)(PB8)
449 +(PB9)|(% style="width:183px" %)Temperature3(DS18B20)
450 +(PB8)
431 431  
432 432  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656377606181-607.png?rev=1.1||alt="1656377606181-607.png"]]
433 433  
434 -[[image:image-20230513134006-1.png||height="559" width="736"]]
454 +[[image:image-20230513134006-1.png||height="743" width="978"]]
435 435  
436 436  
437 -
438 438  ==== 2.3.2.5  MOD~=5(Weight Measurement by HX711) ====
439 439  
440 -
441 441  [[image:image-20230512164658-2.png||height="532" width="729"]]
442 442  
443 443  Each HX711 need to be calibrated before used. User need to do below two steps:
... ... @@ -456,27 +456,31 @@
456 456  
457 457  Check the response of this command and adjust the value to match the real value for thing.
458 458  
459 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
460 -|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
477 +(% style="width:982px" %)
478 +|=(((
461 461  **Size(bytes)**
462 -)))|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 150px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 200px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**4**
463 -|**Value**|BAT|(% style="width:193px" %)(((
480 +)))|=**2**|=(% style="width: 282px;" %)**2**|=(% style="width: 119px;" %)**2**|=(% style="width: 279px;" %)**1**|=(% style="width: 106px;" %)**4**
481 +|**Value**|BAT|(% style="width:282px" %)(((
464 464  Temperature(DS18B20)
483 +
465 465  (PC13)
466 -)))|(% style="width:85px" %)(((
467 -ADC(PA4)
468 -)))|(% style="width:186px" %)(((
485 +
486 +
487 +)))|(% style="width:119px" %)(((
488 +ADC
489 +
490 +(PA4)
491 +)))|(% style="width:279px" %)(((
469 469  Digital in(PB15) &
493 +
470 470  Digital Interrupt(PA8)
471 -)))|(% style="width:100px" %)Weight
495 +)))|(% style="width:106px" %)Weight
472 472  
473 473  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220820120036-2.png?width=1003&height=469&rev=1.1||alt="image-20220820120036-2.png" height="469" width="1003"]]
474 474  
475 475  
476 -
477 477  ==== 2.3.2.6  MOD~=6 (Counting Mode) ====
478 478  
479 -
480 480  In this mode, the device will work in counting mode. It counts the interrupt on the interrupt pins and sends the count on TDC time.
481 481  
482 482  Connection is as below. The PIR sensor is a count sensor, it will generate interrupt when people come close or go away. User can replace the PIR sensor with other counting sensors.
... ... @@ -483,61 +483,74 @@
483 483  
484 484  [[image:image-20230512181814-9.png||height="543" width="697"]]
485 485  
486 -(% style="color:red" %)**Note:** **LoRaWAN wireless transmission will infect the PIR sensor. Which cause the counting value increase +1 for every uplink. User can change PIR sensor or put sensor away of the SN50_v3 to avoid this happen.**
508 +**Note:** LoRaWAN wireless transmission will infect the PIR sensor. Which cause the counting value increase +1 for every uplink. User can change PIR sensor or put sensor away of the SN50_v3 to avoid this happen.
487 487  
488 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
489 -|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**Size(bytes)**|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 220px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 80px;background-color:#D9E2F3;color:#0070C0" %)**4**
510 +(% style="width:961px" %)
511 +|=**Size(bytes)**|=**2**|=(% style="width: 256px;" %)**2**|=(% style="width: 108px;" %)**2**|=(% style="width: 126px;" %)**1**|=(% style="width: 145px;" %)**4**
490 490  |**Value**|BAT|(% style="width:256px" %)(((
491 -Temperature(DS18B20)(PC13)
513 +Temperature(DS18B20)
514 +
515 +(PC13)
492 492  )))|(% style="width:108px" %)(((
493 -ADC(PA4)
517 +ADC
518 +
519 +(PA4)
494 494  )))|(% style="width:126px" %)(((
495 -Digital in(PB15)
521 +Digital in
522 +
523 +(PB15)
496 496  )))|(% style="width:145px" %)(((
497 -Count(PA8)
525 +Count
526 +
527 +(PA8)
498 498  )))
499 499  
500 500  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656378441509-171.png?rev=1.1||alt="1656378441509-171.png"]]
501 501  
502 502  
503 -
504 504  ==== 2.3.2.7  MOD~=7 (Three interrupt contact modes) ====
505 505  
506 -
507 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
508 -|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
535 +|=(((
509 509  **Size(bytes)**
510 -)))|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)1|=(% style="width: 40px;background-color:#D9E2F3;color:#0070C0" %)2
511 -|**Value**|BAT|(% style="width:188px" %)(((
537 +)))|=**2**|=**2**|=**2**|=**1**|=**1**|=1|=2
538 +|**Value**|BAT|(((
512 512  Temperature(DS18B20)
540 +
513 513  (PC13)
514 -)))|(% style="width:83px" %)(((
515 -ADC(PA5)
516 -)))|(% style="width:184px" %)(((
542 +)))|(((
543 +ADC
544 +
545 +(PA5)
546 +)))|(((
517 517  Digital Interrupt1(PA8)
518 -)))|(% style="width:186px" %)Digital Interrupt2(PA4)|(% style="width:197px" %)Digital Interrupt3(PB15)|(% style="width:100px" %)Reserved
548 +)))|Digital Interrupt2(PA4)|Digital Interrupt3(PB15)|Reserved
519 519  
520 520  [[image:image-20230513111203-7.png||height="324" width="975"]]
521 521  
522 -
523 523  ==== 2.3.2.8  MOD~=8 （3ADC+1DS18B20） ====
524 524  
525 -
526 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
527 -|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
554 +(% style="width:917px" %)
555 +|=(((
528 528  **Size(bytes)**
529 -)))|=(% style="width: 30px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 120px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 70px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 120px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 70px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 70px;background-color:#D9E2F3;color:#0070C0" %)2
557 +)))|=**2**|=(% style="width: 207px;" %)**2**|=(% style="width: 94px;" %)**2**|=(% style="width: 198px;" %)**1**|=(% style="width: 84px;" %)**2**|=(% style="width: 79px;" %)2
530 530  |**Value**|BAT|(% style="width:207px" %)(((
531 531  Temperature(DS18B20)
560 +
532 532  (PC13)
533 533  )))|(% style="width:94px" %)(((
534 -ADC1(PA4)
563 +ADC1
564 +
565 +(PA4)
535 535  )))|(% style="width:198px" %)(((
536 536  Digital Interrupt(PB15)
537 537  )))|(% style="width:84px" %)(((
538 -ADC2(PA5)
539 -)))|(% style="width:82px" %)(((
540 -ADC3(PA8)
569 +ADC2
570 +
571 +(PA5)
572 +)))|(% style="width:79px" %)(((
573 +ADC3
574 +
575 +(PA8)
541 541  )))
542 542  
543 543  [[image:image-20230513111231-8.png||height="335" width="900"]]
... ... @@ -545,50 +545,56 @@
545 545  
546 546  ==== 2.3.2.9  MOD~=9 (3DS18B20+ two Interrupt count mode) ====
547 547  
548 -
549 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
550 -|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
583 +(% style="width:1010px" %)
584 +|=(((
551 551  **Size(bytes)**
552 -)))|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 80px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)4|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)4
586 +)))|=**2**|=**2**|=**2**|=**1**|=(% style="width: 193px;" %)**2**|=(% style="width: 78px;" %)4|=(% style="width: 78px;" %)4
553 553  |**Value**|BAT|(((
554 554  Temperature1(DS18B20)
589 +
555 555  (PC13)
556 556  )))|(((
557 557  Temperature2(DS18B20)
593 +
558 558  (PB9)
559 559  )))|(((
560 560  Digital Interrupt
597 +
561 561  (PB15)
562 562  )))|(% style="width:193px" %)(((
563 563  Temperature3(DS18B20)
601 +
564 564  (PB8)
565 565  )))|(% style="width:78px" %)(((
566 -Count1(PA8)
604 +Count1
605 +
606 +(PA8)
567 567  )))|(% style="width:78px" %)(((
568 -Count2(PA4)
608 +Count2
609 +
610 +(PA4)
569 569  )))
570 570  
571 571  [[image:image-20230513111255-9.png||height="341" width="899"]]
572 572  
573 -(% style="color:blue" %)**The newly added AT command is issued correspondingly:**
615 +**The newly added AT command is issued correspondingly:**
574 574  
575 -(% style="color:#037691" %)** AT+INTMOD1 PA8**(%%)  pin：  Corresponding downlink:  (% style="color:#037691" %)**06 00 00 xx**
617 +**~ AT+INTMOD1** ** PA8**  pin：  Corresponding downlink:  **06 00 00 xx**
576 576  
577 -(% style="color:#037691" %)** AT+INTMOD2 PA4**(%%)  pin：  Corresponding downlink: (% style="color:#037691" %)**06 00 01 xx**
619 +**~ AT+INTMOD2**  **PA4**  pin：  Corresponding downlink:**  06 00 01 xx**
578 578  
579 -(% style="color:#037691" %)** AT+INTMOD3 PB15**(%%)  pin：  Corresponding downlink:  (% style="color:#037691" %)** 06 00 02 xx**
621 +**~ AT+INTMOD3**  **PB15**  pin：  Corresponding downlink:  ** 06 00 02 xx**
580 580  
623 +**AT+SETCNT=aa,bb** 
581 581  
582 -(% style="color:blue" %)**AT+SETCNT=aa,bb** 
583 -
584 584  When AA is 1, set the count of PA8 pin to BB Corresponding downlink：09 01 bb bb bb bb
585 585  
586 586  When AA is 2, set the count of PA4 pin to BB Corresponding downlink：09 02 bb bb bb bb
587 587  
588 588  
630 +
589 589  === 2.3.3  ​Decode payload ===
590 590  
591 -
592 592  While using TTN V3 network, you can add the payload format to decode the payload.
593 593  
594 594  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656378466788-734.png?rev=1.1||alt="1656378466788-734.png"]]
... ... @@ -600,7 +600,6 @@
600 600  
601 601  ==== 2.3.3.1 Battery Info ====
602 602  
603 -
604 604  Check the battery voltage for SN50v3.
605 605  
606 606  Ex1: 0x0B45 = 2885mV
... ... @@ -610,16 +610,15 @@
610 610  
611 611  ==== 2.3.3.2  Temperature (DS18B20) ====
612 612  
653 +If there is a DS18B20 connected to PB3 pin. The temperature will be uploaded in the payload.
613 613  
614 -If there is a DS18B20 connected to PC13 pin. The temperature will be uploaded in the payload.
655 +More DS18B20 can check the [[3 DS18B20 mode>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#2.3.4MOD3D4283xDS18B2029]]
615 615  
616 -More DS18B20 can check the [[3 DS18B20 mode>>||anchor="H2.3.2.4MOD3D4283xDS18B2029"]]
657 +**Connection:**
617 617  
618 -(% style="color:blue" %)**Connection:**
619 -
620 620  [[image:image-20230512180718-8.png||height="538" width="647"]]
621 621  
622 -(% style="color:blue" %)**Example**:
661 +**Example**:
623 623  
624 624  If payload is: 0105H:  (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
625 625  
... ... @@ -639,7 +639,7 @@
639 639  (((
640 640  When the digital interrupt pin is set to AT+INTMODx=0, this pin is used as a digital input pin.
641 641  
642 -(% style="color:red" %)**Note:**The maximum voltage input supports 3.6V.
681 +**Note:**The maximum voltage input supports 3.6V.
643 643  )))
644 644  
645 645  ==== 2.3.3.4  Analogue Digital Converter (ADC) ====
... ... @@ -650,18 +650,17 @@
650 650  
651 651  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220628150112-1.png?width=285&height=241&rev=1.1||alt="image-20220628150112-1.png" height="241" width="285"]]
652 652  
653 -(% style="color:red" %)**Note:**If the ADC type sensor needs to be powered by SN50_v3, it is recommended to use +5V to control its switch.Only sensors with low power consumption can be powered with VDD.
692 +**Note:**If the ADC type sensor needs to be powered by SN50_v3, it is recommended to use +5V to control its switch.Only sensors with low power consumption can be powered with VDD.
654 654  
655 -
656 656  ==== 2.3.3.5 Digital Interrupt ====
657 657  
658 658  Digital Interrupt refers to pin PA8, and there are different trigger methods. When there is a trigger, the SN50v3 will send a packet to the server.
659 659  
660 -(% style="color:blue" %)** Interrupt connection method:**
698 +**~ Interrupt connection method:**
661 661  
662 662  [[image:image-20230513105351-5.png||height="147" width="485"]]
663 663  
664 -(% style="color:blue" %)**Example to use with door sensor :**
702 +**Example to use with door sensor :**
665 665  
666 666  The door sensor is shown at right. It is a two wire magnetic contact switch used for detecting the open/close status of doors or windows.
667 667  
... ... @@ -669,7 +669,7 @@
669 669  
670 670  When the two pieces are close to each other, the 2 wire output will be short or open (depending on the type), while if the two pieces are away from each other, the 2 wire output will be the opposite status. So we can use SN50_v3 interrupt interface to detect the status for the door or window.
671 671  
672 -(% style="color:blue" %)** Below is the installation example:**
710 +**~ Below is the installation example:**
673 673  
674 674  Fix one piece of the magnetic sensor to the door and connect the two pins to SN50_v3 as follows:
675 675  
... ... @@ -694,7 +694,7 @@
694 694  
695 695  The command is:
696 696  
697 -(% style="color:blue" %)**AT+INTMOD1=1   ** (%%) ~/~/(more info about INMOD please refer** **[[**AT Command Manual**>>url:http://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/&file=DRAGINO_LSN50_AT_Commands_v1.5.1.pdf]]**. **)
735 +**AT+INTMOD1=1       **~/~/(more info about INMOD please refer** **[[**AT Command Manual**>>url:http://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/&file=DRAGINO_LSN50_AT_Commands_v1.5.1.pdf]]**. **)
698 698  
699 699  Below shows some screen captures in TTN V3:
700 700  
... ... @@ -709,14 +709,14 @@
709 709  
710 710  The SDA and SCK are I2C interface lines. You can use these to connect to an I2C device and get the sensor data.
711 711  
712 -We have made an example to show how to use the I2C interface to connect to the SHT20/ SHT31 Temperature and Humidity Sensor.
750 +We have made an example to show how to use the I2C interface to connect to the SHT20 Temperature and Humidity Sensor.
713 713  
714 -Notice: Different I2C sensors have different I2C commands set and initiate process, if user want to use other I2C sensors, User need to re-write the source code to support those sensors. SHT20/ SHT31 code in SN50_v3 will be a good reference.
752 +Notice: Different I2C sensors have different I2C commands set and initiate process, if user want to use other I2C sensors, User need to re-write the source code to support those sensors. SHT20 code in SN50_v3 will be a good reference.
715 715  
716 716  Below is the connection to SHT20/ SHT31. The connection is as below:
717 717  
718 718  
719 -[[image:image-20230513103633-3.png||height="448" width="716"]]
757 +[[image:image-20230513103633-3.png||height="636" width="1017"]]
720 720  
721 721  The device will be able to get the I2C sensor data now and upload to IoT Server.
722 722  
... ... @@ -735,7 +735,7 @@
735 735  
736 736  ==== 2.3.3.7  ​Distance Reading ====
737 737  
738 -Refer [[Ultrasonic Sensor section>>||anchor="H2.3.3.8UltrasonicSensor"]].
776 +Refer [[Ultrasonic Sensor section>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.8UltrasonicSensor]].
739 739  
740 740  
741 741  ==== 2.3.3.8 Ultrasonic Sensor ====
... ... @@ -744,13 +744,13 @@
744 744  
745 745  The SN50_v3 detects the pulse width of the sensor and converts it to mm output. The accuracy will be within 1 centimeter. The usable range (the distance between the ultrasonic probe and the measured object) is between 24cm and 600cm.
746 746  
747 -The working principle of this sensor is similar to the (% style="color:blue" %)**HC-SR04**(%%) ultrasonic sensor.
785 +The working principle of this sensor is similar to the **HC-SR04** ultrasonic sensor.
748 748  
749 749  The picture below shows the connection:
750 750  
751 751  [[image:image-20230512173903-6.png||height="596" width="715"]]
752 752  
753 -Connect to the SN50_v3 and run (% style="color:blue" %)**AT+MOD=2**(%%) to switch to ultrasonic mode (ULT).
791 +Connect to the SN50_v3 and run **AT+MOD=2** to switch to ultrasonic mode (ULT).
754 754  
755 755  The ultrasonic sensor uses the 8^^th^^ and 9^^th^^ byte for the measurement value.
756 756  
... ... @@ -771,7 +771,7 @@
771 771  
772 772  The 5V output time can be controlled by AT Command.
773 773  
774 -(% style="color:blue" %)**AT+5VT=1000**
812 +**AT+5VT=1000**
775 775  
776 776  Means set 5V valid time to have 1000ms. So the real 5V output will actually have 1000ms + sampling time for other sensors.
777 777  
... ... @@ -783,9 +783,9 @@
783 783  
784 784  MOD=1 support this sensor. The sensor value is in the 8^^th^^ and 9^^th^^ bytes.
785 785  
786 -[[image:image-20230512172447-4.png||height="416" width="712"]]
824 +[[image:image-20230512172447-4.png||height="593" width="1015"]]
787 787  
788 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220628110012-12.png?rev=1.1||alt="image-20220628110012-12.png" height="361" width="953"]]
826 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220628110012-12.png?rev=1.1||alt="image-20220628110012-12.png"]]
789 789  
790 790  
791 791  ==== 2.3.3.12  Working MOD ====
... ... @@ -806,7 +806,6 @@
806 806  * 7: MOD8
807 807  * 8: MOD9
808 808  
809 -
810 810  == 2.4 Payload Decoder file ==
811 811  
812 812  
... ... @@ -814,7 +814,7 @@
814 814  
815 815  In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from:
816 816  
817 -[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/SN50_v3-LB>>https://github.com/dragino/dragino-end-node-decoder/tree/main/SN50_v3-LB]]
854 +[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/LSN50v2-S31%26S31B >>https://github.com/dragino/dragino-end-node-decoder/tree/main/LSN50v2-S31%26S31B]]
818 818  
819 819  
820 820  
... ... @@ -858,6 +858,7 @@
858 858  
859 859  === 3.3.1 Set Transmit Interval Time ===
860 860  
898 +
861 861  Feature: Change LoRaWAN End Node Transmit Interval.
862 862  
863 863  (% style="color:blue" %)**AT Command: AT+TDC**
... ... @@ -883,10 +883,9 @@
883 883  * Example 1: Downlink Payload: 0100001E  ~/~/  Set Transmit Interval (TDC) = 30 seconds
884 884  * Example 2: Downlink Payload: 0100003C  ~/~/  Set Transmit Interval (TDC) = 60 seconds
885 885  
886 -
887 887  === 3.3.2 Get Device Status ===
888 888  
889 -Send a LoRaWAN downlink to ask the device to send its status.
926 +Send a LoRaWAN downlink to ask device send Alarm settings.
890 890  
891 891  (% style="color:blue" %)**Downlink Payload:  **(%%)0x26 01
892 892  
... ... @@ -895,6 +895,7 @@
895 895  
896 896  === 3.3.3 Set Interrupt Mode ===
897 897  
935 +
898 898  Feature, Set Interrupt mode for GPIO_EXIT.
899 899  
900 900  (% style="color:blue" %)**AT Command: AT+INTMOD1，AT+INTMOD2，AT+INTMOD3**
... ... @@ -931,7 +931,6 @@
931 931  * Example 3: Downlink Payload: 06000102  **~-~-->**  AT+INTMOD2=2
932 932  * Example 4: Downlink Payload: 06000201  **~-~-->**  AT+INTMOD3=1
933 933  
934 -
935 935  === 3.3.4 Set Power Output Duration ===
936 936  
937 937  Control the output duration 5V . Before each sampling, device will
... ... @@ -948,6 +948,7 @@
948 948  |=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
949 949  |(% style="width:154px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:157px" %)(((
950 950  500(default)
988 +
951 951  OK
952 952  )))
953 953  |(% style="width:154px" %)AT+5VT=1000|(% style="width:196px" %)(((
... ... @@ -960,10 +960,9 @@
960 960  
961 961  The first and second bytes are the time to turn on.
962 962  
963 -* Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
964 -* Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
1001 +* Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
1002 +* Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
965 965  
966 -
967 967  === 3.3.5 Set Weighing parameters ===
968 968  
969 969  Feature: Working mode 5 is effective, weight initialization and weight factor setting of HX711.
... ... @@ -978,6 +978,7 @@
978 978  
979 979  (% style="color:blue" %)**Downlink Command: 0x08**
980 980  
1018 +
981 981  Format: Command Code (0x08) followed by 2 bytes or 4 bytes.
982 982  
983 983  Use AT+WEIGRE when the first byte is 1, only 1 byte. When it is 2, use AT+WEIGAP, there are 3 bytes.
... ... @@ -988,7 +988,6 @@
988 988  * Example 2: Downlink Payload: 08020FA3  **~-~-->**  AT+WEIGAP=400.3
989 989  * Example 3: Downlink Payload: 08020FA0  **~-~-->**  AT+WEIGAP=400.0
990 990  
991 -
992 992  === 3.3.6 Set Digital pulse count value ===
993 993  
994 994  Feature: Set the pulse count value.
... ... @@ -1004,6 +1004,7 @@
1004 1004  
1005 1005  (% style="color:blue" %)**Downlink Command: 0x09**
1006 1006  
1044 +
1007 1007  Format: Command Code (0x09) followed by 5 bytes.
1008 1008  
1009 1009  The first byte is to select which count value to initialize, and the next four bytes are the count value to be initialized.
... ... @@ -1011,7 +1011,6 @@
1011 1011  * Example 1: Downlink Payload: 090100000000  **~-~-->**  AT+SETCNT=1,0
1012 1012  * Example 2: Downlink Payload: 0902000003E8  **~-~-->**  AT+SETCNT=2,1000
1013 1013  
1014 -
1015 1015  === 3.3.7 Set Workmode ===
1016 1016  
1017 1017  Feature: Switch working mode.
... ... @@ -1025,17 +1025,18 @@
1025 1025  )))
1026 1026  |(% style="width:154px" %)AT+MOD=4|(% style="width:196px" %)Set the working mode to 3DS18B20s.|(% style="width:157px" %)(((
1027 1027  OK
1065 +
1028 1028  Attention:Take effect after ATZ
1029 1029  )))
1030 1030  
1031 1031  (% style="color:blue" %)**Downlink Command: 0x0A**
1032 1032  
1071 +
1033 1033  Format: Command Code (0x0A) followed by 1 bytes.
1034 1034  
1035 1035  * Example 1: Downlink Payload: 0A01  **~-~-->**  AT+MOD=1
1036 1036  * Example 2: Downlink Payload: 0A04  **~-~-->**  AT+MOD=4
1037 1037  
1038 -
1039 1039  = 4. Battery & Power Consumption =
1040 1040  
1041 1041  
... ... @@ -1109,5 +1109,4 @@
1109 1109  
1110 1110  
1111 1111  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1112 -
1113 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.cc>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.cc]]
1150 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
image-20230515135611-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -948.0 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0