Last modified by Bei Jinggeng on 2025/01/10 15:51
<
From version < 43.44 >
edited by Xiaoling
on 2023/05/16 15:31
To version < 34.1 >
edited by Saxer Lin
on 2023/05/13 11:12
>
Change comment: Uploaded new attachment "image-20230513111231-8.png", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -SN50v3-LB LoRaWAN Sensor Node User Manual
1 +SN50v3-LB User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Saxer
Content
... ... @@ -1,5 +1,4 @@
1 -(% style="text-align:center" %)
2 -[[image:image-20230515135611-1.jpeg||height="589" width="589"]]
1 +[[image:image-20230511201248-1.png||height="403" width="489"]]
3 3  
4 4  
5 5  
... ... @@ -16,21 +16,23 @@
16 16  
17 17  == 1.1 What is SN50v3-LB LoRaWAN Generic Node ==
18 18  
19 -
20 20  (% style="color:blue" %)**SN50V3-LB **(%%)LoRaWAN Sensor Node is a Long Range LoRa Sensor Node. It is designed for outdoor use and powered by (% style="color:blue" %)** 8500mA Li/SOCl2 battery**(%%) for long term use.SN50V3-LB is designed to facilitate developers to quickly deploy industrial level LoRa and IoT solutions. It help users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to program, create and connect your things everywhere.
21 21  
20 +
22 22  (% style="color:blue" %)**SN50V3-LB wireless part**(%%) is based on SX1262 allows the user to send data and reach extremely long ranges at low data-rates.It provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, and so on.
23 23  
23 +
24 24  (% style="color:blue" %)**SN50V3-LB **(%%)has a powerful 48Mhz ARM microcontroller with 256KB flash and 64KB RAM. It has multiplex I/O pins to connect to different sensors.
25 25  
26 +
26 26  (% style="color:blue" %)**SN50V3-LB**(%%) has a built-in BLE module, user can configure the sensor remotely via Mobile Phone. It also support OTA upgrade via private LoRa protocol for easy maintaining.
27 27  
29 +
28 28  SN50V3-LB is the 3^^rd^^ generation of LSN50 series generic sensor node from Dragino. It is an (% style="color:blue" %)**open source project**(%%) and has a mature LoRaWAN stack and application software. User can use the pre-load software for their IoT projects or easily customize the software for different requirements.
29 29  
30 30  
31 31  == 1.2 ​Features ==
32 32  
33 -
34 34  * LoRaWAN 1.0.3 Class A
35 35  * Ultra-low power consumption
36 36  * Open-Source hardware/software
... ... @@ -43,7 +43,6 @@
43 43  
44 44  == 1.3 Specification ==
45 45  
46 -
47 47  (% style="color:#037691" %)**Common DC Characteristics:**
48 48  
49 49  * Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
... ... @@ -80,7 +80,6 @@
80 80  
81 81  == 1.4 Sleep mode and working mode ==
82 82  
83 -
84 84  (% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
85 85  
86 86  (% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
... ... @@ -123,7 +123,7 @@
123 123  == 1.7 Pin Definitions ==
124 124  
125 125  
126 -[[image:image-20230513102034-2.png]]
125 +[[image:image-20230511203450-2.png||height="443" width="785"]]
127 127  
128 128  
129 129  == 1.8 Mechanical ==
... ... @@ -138,7 +138,6 @@
138 138  
139 139  == Hole Option ==
140 140  
141 -
142 142  SN50v3-LB has different hole size options for different size sensor cable. The options provided are M12, M16 and M20. The definition is as below:
143 143  
144 144  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220627104757-1.png?rev=1.1||alt="image-20220627104757-1.png"]]
... ... @@ -292,23 +292,23 @@
292 292  
293 293  ==== 2.3.2.1  MOD~=1 (Default Mode) ====
294 294  
295 -
296 296  In this mode, uplink payload includes in total 11 bytes. Uplink packets use FPORT=2.
297 297  
298 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
299 -|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:20px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:90px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:130px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:90px" %)**2**
300 -|**Value**|Bat|(% style="width:191px" %)(((
301 -Temperature(DS18B20)(PC13)
302 -)))|(% style="width:78px" %)(((
303 -ADC(PA4)
295 +|**Size(bytes)**|**2**|**2**|**2**|(% style="width:216px" %)**1**|(% style="width:342px" %)**2**|(% style="width:171px" %)**2**
296 +|**Value**|Bat|(((
297 +Temperature(DS18B20)
298 +
299 +(PC13)
300 +)))|(((
301 +ADC
302 +
303 +(PA4)
304 304  )))|(% style="width:216px" %)(((
305 -Digital in(PB15)&Digital Interrupt(PA8)
306 -)))|(% style="width:308px" %)(((
307 -Temperature(SHT20 or SHT31 or BH1750 Illumination Sensor)
308 -)))|(% style="width:154px" %)(((
309 -Humidity(SHT20 or SHT31)
310 -)))
305 +Digital in & Digital Interrupt
311 311  
307 +
308 +)))|(% style="width:342px" %)Temperature（SHT20 or SHT31 or BH1750 Illumination Sensor|(% style="width:171px" %)Humidity（SHT20 or SHT31)
309 +
312 312  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220627150949-6.png?rev=1.1||alt="image-20220627150949-6.png"]]
313 313  
314 314  
... ... @@ -316,108 +316,102 @@
316 316  
317 317  This mode is target to measure the distance. The payload of this mode is totally 11 bytes. The 8^^th^^ and 9^^th^^ bytes is for the distance.
318 318  
319 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
320 -|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:110px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:110px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:140px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**2**
321 -|**Value**|BAT|(% style="width:196px" %)(((
322 -Temperature(DS18B20)(PC13)
323 -)))|(% style="width:87px" %)(((
324 -ADC(PA4)
325 -)))|(% style="width:189px" %)(((
326 -Digital in(PB15) & Digital Interrupt(PA8)
327 -)))|(% style="width:208px" %)(((
328 -Distance measure by:1) LIDAR-Lite V3HP
329 -Or 2) Ultrasonic Sensor
330 -)))|(% style="width:117px" %)Reserved
317 +|**Size(bytes)**|**2**|**2**|**2**|**1**|**2**|**2**
318 +|**Value**|BAT|(((
319 +Temperature(DS18B20)
320 +)))|ADC|Digital in & Digital Interrupt|(((
321 +Distance measure by:
322 +1) LIDAR-Lite V3HP
323 +Or
324 +2) Ultrasonic Sensor
325 +)))|Reserved
331 331  
332 332  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656324539647-568.png?rev=1.1||alt="1656324539647-568.png"]]
333 333  
334 -(% style="color:blue" %)**Connection of LIDAR-Lite V3HP:**
329 +**Connection of LIDAR-Lite V3HP:**
335 335  
336 336  [[image:image-20230512173758-5.png||height="563" width="712"]]
337 337  
338 -(% style="color:blue" %)**Connection to Ultrasonic Sensor:**
333 +**Connection to Ultrasonic Sensor:**
339 339  
340 -Need to remove R1 and R2 resistors to get low power,otherwise there will be 240uA standby current.
341 -
342 342  [[image:image-20230512173903-6.png||height="596" width="715"]]
343 343  
344 344  For the connection to TF-Mini or TF-Luna , MOD2 payload is as below:
345 345  
346 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
347 -|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:20px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:120px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:80px" %)**2**
348 -|**Value**|BAT|(% style="width:183px" %)(((
349 -Temperature(DS18B20)(PC13)
350 -)))|(% style="width:173px" %)(((
351 -Digital in(PB15) & Digital Interrupt(PA8)
352 -)))|(% style="width:84px" %)(((
353 -ADC(PA4)
354 -)))|(% style="width:323px" %)(((
339 +|**Size(bytes)**|**2**|**2**|**1**|**2**|**2**|**2**
340 +|**Value**|BAT|(((
341 +Temperature(DS18B20)
342 +)))|Digital in & Digital Interrupt|ADC|(((
355 355  Distance measure by:1)TF-Mini plus LiDAR
356 356  Or 
357 357  2) TF-Luna LiDAR
358 -)))|(% style="width:188px" %)Distance signal  strength
346 +)))|Distance signal  strength
359 359  
360 360  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656376779088-686.png?rev=1.1||alt="1656376779088-686.png"]]
361 361  
362 362  **Connection to [[TF-Mini plus>>url:http://en.benewake.com/product/detail/5c345cd0e5b3a844c472329b.html]] LiDAR(UART version):**
363 363  
364 -Need to remove R3 and R4 resistors to get low power,otherwise there will be 400uA standby current.
352 +Need to remove R3 and R4 resistors to get low power.
365 365  
366 366  [[image:image-20230512180609-7.png||height="555" width="802"]]
367 367  
368 368  **Connection to [[TF-Luna>>url:http://en.benewake.com/product/detail/5e1c1fd04d839408076b6255.html]] LiDAR (UART version):**
369 369  
370 -Need to remove R3 and R4 resistors to get low power,otherwise there will be 400uA standby current.
358 +Need to remove R3 and R4 resistors to get low power.
371 371  
372 -[[image:image-20230513105207-4.png||height="469" width="802"]]
360 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656376865561-355.png?rev=1.1||alt="1656376865561-355.png"]]
373 373  
362 +Please use firmware version > 1.6.5 when use MOD=2, in this firmware version, user can use LSn50 v1 to power the ultrasonic sensor directly and with low power consumption.
374 374  
364 +
375 375  ==== 2.3.2.3  MOD~=3 (3 ADC + I2C) ====
376 376  
377 377  This mode has total 12 bytes. Include 3 x ADC + 1x I2C
378 378  
379 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
380 -|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
369 +|=(((
381 381  **Size(bytes)**
382 -)))|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 140px;background-color:#D9E2F3;color:#0070C0" %)2|=(% style="width: 120px;background-color:#D9E2F3;color:#0070C0" %)2|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)1
371 +)))|=(% style="width: 68px;" %)**2**|=(% style="width: 75px;" %)**2**|=**2**|=**1**|=(% style="width: 318px;" %)2|=(% style="width: 172px;" %)2|=1
383 383  |**Value**|(% style="width:68px" %)(((
384 -ADC1(PA4)
373 +ADC
374 +
375 +(PA0)
385 385  )))|(% style="width:75px" %)(((
386 -ADC2(PA5)
387 -)))|(((
388 -ADC3(PA8)
389 -)))|(((
390 -Digital Interrupt(PB15)
391 -)))|(% style="width:304px" %)(((
392 -Temperature(SHT20 or SHT31 or BH1750 Illumination Sensor)
393 -)))|(% style="width:163px" %)(((
394 -Humidity(SHT20 or SHT31)
395 -)))|(% style="width:53px" %)Bat
377 +ADC2
396 396  
397 -[[image:image-20230513110214-6.png]]
379 +(PA1)
380 +)))|ADC3 (PA4)|(((
381 +Digital in(PA12)&Digital Interrupt1(PB14)
382 +)))|(% style="width:318px" %)Temperature（SHT20 or SHT31 or BH1750 Illumination Sensor）|(% style="width:172px" %)Humidity（SHT20 or SHT31)|Bat
398 398  
384 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656377431497-975.png?rev=1.1||alt="1656377431497-975.png"]]
399 399  
386 +
400 400  ==== 2.3.2.4 MOD~=4 (3 x DS18B20) ====
401 401  
389 +[[image:image-20230512170701-3.png||height="565" width="743"]]
402 402  
403 403  This mode has total 11 bytes. As shown below:
404 404  
405 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
406 -|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:20px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**
393 +(% style="width:1017px" %)
394 +|**Size(bytes)**|**2**|(% style="width:186px" %)**2**|(% style="width:82px" %)**2**|(% style="width:210px" %)**1**|(% style="width:191px" %)**2**|(% style="width:183px" %)**2**
407 407  |**Value**|BAT|(% style="width:186px" %)(((
408 -Temperature1(DS18B20)(PC13)
396 +Temperature1(DS18B20)
397 +(PC13)
409 409  )))|(% style="width:82px" %)(((
410 -ADC(PA4)
399 +ADC
400 +
401 +(PA4)
411 411  )))|(% style="width:210px" %)(((
412 -Digital in(PB15) & Digital Interrupt(PA8) 
403 +Digital in & Digital Interrupt
404 +
405 +(PB15)  &  (PA8) 
413 413  )))|(% style="width:191px" %)Temperature2(DS18B20)
414 -(PB9)|(% style="width:183px" %)Temperature3(DS18B20)(PB8)
407 +(PB9)|(% style="width:183px" %)Temperature3(DS18B20)
408 +(PB8)
415 415  
416 416  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656377606181-607.png?rev=1.1||alt="1656377606181-607.png"]]
417 417  
418 -[[image:image-20230513134006-1.png||height="559" width="736"]]
419 419  
420 -
421 421  ==== 2.3.2.5  MOD~=5(Weight Measurement by HX711) ====
422 422  
423 423  [[image:image-20230512164658-2.png||height="532" width="729"]]
... ... @@ -438,20 +438,26 @@
438 438  
439 439  Check the response of this command and adjust the value to match the real value for thing.
440 440  
441 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
442 -|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
433 +(% style="width:982px" %)
434 +|=(((
443 443  **Size(bytes)**
444 -)))|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 150px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 200px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**4**
445 -|**Value**|BAT|(% style="width:193px" %)(((
446 -Temperature(DS18B20)
436 +)))|=**2**|=(% style="width: 282px;" %)**2**|=(% style="width: 119px;" %)**2**|=(% style="width: 279px;" %)**1**|=(% style="width: 106px;" %)**4**
437 +|**Value**|[[Bat>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.1BatteryInfo]]|(% style="width:282px" %)(((
438 +[[Temperature(DS18B20)>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.2Temperature28DS18B2029]]
439 +
447 447  (PC13)
448 -)))|(% style="width:85px" %)(((
449 -ADC(PA4)
450 -)))|(% style="width:186px" %)(((
451 -Digital in(PB15) &
452 -Digital Interrupt(PA8)
453 -)))|(% style="width:100px" %)Weight
454 454  
442 +
443 +)))|(% style="width:119px" %)(((
444 +[[ADC>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.4AnalogueDigitalConverter28ADC29]]
445 +
446 +(PA4)
447 +)))|(% style="width:279px" %)(((
448 +[[Digital Input and Digitak Interrupt>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.3DigitalInput]]
449 +
450 +(PB15)  &  (PA8)
451 +)))|(% style="width:106px" %)Weight
452 +
455 455  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220820120036-2.png?width=1003&height=469&rev=1.1||alt="image-20220820120036-2.png" height="469" width="1003"]]
456 456  
457 457  
... ... @@ -463,19 +463,12 @@
463 463  
464 464  [[image:image-20230512181814-9.png||height="543" width="697"]]
465 465  
466 -(% style="color:red" %)**Note:** LoRaWAN wireless transmission will infect the PIR sensor. Which cause the counting value increase +1 for every uplink. User can change PIR sensor or put sensor away of the SN50_v3 to avoid this happen.
464 +**Note:** LoRaWAN wireless transmission will infect the PIR sensor. Which cause the counting value increase +1 for every uplink. User can change PIR sensor or put sensor away of the LSN50 to avoid this happen.
467 467  
468 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
469 -|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**Size(bytes)**|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 220px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 80px;background-color:#D9E2F3;color:#0070C0" %)**4**
470 -|**Value**|BAT|(% style="width:256px" %)(((
471 -Temperature(DS18B20)(PC13)
472 -)))|(% style="width:108px" %)(((
473 -ADC(PA4)
474 -)))|(% style="width:126px" %)(((
475 -Digital in(PB15)
476 -)))|(% style="width:145px" %)(((
477 -Count(PA8)
478 -)))
466 +|=**Size(bytes)**|=**2**|=**2**|=**2**|=**1**|=**4**
467 +|**Value**|[[BAT>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.1BatteryInfo]]|(((
468 +[[Temperature(DS18B20)>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.2Temperature28DS18B2029]]
469 +)))|[[ADC>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.4AnalogueDigitalConverter28ADC29]]|[[Digital in>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.3DigitalInput]]|Count
479 479  
480 480  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656378441509-171.png?rev=1.1||alt="1656378441509-171.png"]]
481 481  
... ... @@ -482,86 +482,72 @@
482 482  
483 483  ==== 2.3.2.7  MOD~=7 (Three interrupt contact modes) ====
484 484  
485 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
486 -|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
476 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220820140109-3.png?rev=1.1||alt="image-20220820140109-3.png"]]
477 +
478 +|=(((
487 487  **Size(bytes)**
488 -)))|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)1|=(% style="width: 40px;background-color:#D9E2F3;color:#0070C0" %)2
489 -|**Value**|BAT|(% style="width:188px" %)(((
490 -Temperature(DS18B20)
491 -(PC13)
492 -)))|(% style="width:83px" %)(((
493 -ADC(PA5)
494 -)))|(% style="width:184px" %)(((
495 -Digital Interrupt1(PA8)
496 -)))|(% style="width:186px" %)Digital Interrupt2(PA4)|(% style="width:197px" %)Digital Interrupt3(PB15)|(% style="width:100px" %)Reserved
480 +)))|=**2**|=**2**|=**2**|=**1**|=**1**|=1|=2
481 +|**Value**|BAT|Temperature(DS18B20)|ADC|(((
482 +Digital in(PA12)&Digital Interrupt1(PB14)
483 +)))|Digital Interrupt2(PB15)|Digital Interrupt3(PA4)|Reserved
497 497  
498 -[[image:image-20230513111203-7.png||height="324" width="975"]]
499 -
500 500  ==== 2.3.2.8  MOD~=8 （3ADC+1DS18B20） ====
501 501  
502 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
503 -|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
487 +|=(((
504 504  **Size(bytes)**
505 -)))|=(% style="width: 30px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 120px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 70px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 120px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 70px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 70px;background-color:#D9E2F3;color:#0070C0" %)2
506 -|**Value**|BAT|(% style="width:207px" %)(((
507 -Temperature(DS18B20)
508 -(PC13)
509 -)))|(% style="width:94px" %)(((
510 -ADC1(PA4)
511 -)))|(% style="width:198px" %)(((
512 -Digital Interrupt(PB15)
513 -)))|(% style="width:84px" %)(((
514 -ADC2(PA5)
515 -)))|(% style="width:82px" %)(((
516 -ADC3(PA8)
489 +)))|=**2**|=**2**|=**2**|=**1**|=**2**|=2
490 +|**Value**|BAT|Temperature(DS18B20)|(((
491 +ADC1(PA0)
492 +)))|(((
493 +Digital in
494 +& Digital Interrupt(PB14)
495 +)))|(((
496 +ADC2(PA1)
497 +)))|(((
498 +ADC3(PA4)
517 517  )))
518 518  
519 -[[image:image-20230513111231-8.png||height="335" width="900"]]
501 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220823164903-2.png?rev=1.1||alt="image-20220823164903-2.png"]]
520 520  
521 521  
522 522  ==== 2.3.2.9  MOD~=9 (3DS18B20+ two Interrupt count mode) ====
523 523  
524 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
525 -|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
506 +|=(((
526 526  **Size(bytes)**
527 -)))|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 80px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)4|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)4
508 +)))|=**2**|=**2**|=**2**|=**1**|=**2**|=4|=4
528 528  |**Value**|BAT|(((
529 -Temperature1(DS18B20)
530 -(PC13)
510 +Temperature1(PB3)
531 531  )))|(((
532 -Temperature2(DS18B20)
533 -(PB9)
512 +Temperature2(PA9)
534 534  )))|(((
535 -Digital Interrupt
536 -(PB15)
537 -)))|(% style="width:193px" %)(((
538 -Temperature3(DS18B20)
539 -(PB8)
540 -)))|(% style="width:78px" %)(((
541 -Count1(PA8)
542 -)))|(% style="width:78px" %)(((
543 -Count2(PA4)
514 +Digital in
515 +& Digital Interrupt(PA4)
516 +)))|(((
517 +Temperature3(PA10)
518 +)))|(((
519 +Count1(PB14)
520 +)))|(((
521 +Count2(PB15)
544 544  )))
545 545  
546 -[[image:image-20230513111255-9.png||height="341" width="899"]]
524 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220823165322-3.png?rev=1.1||alt="image-20220823165322-3.png"]]
547 547  
548 -(% style="color:blue" %)**The newly added AT command is issued correspondingly:**
526 +**The newly added AT command is issued correspondingly:**
549 549  
550 -(% style="color:#037691" %)** AT+INTMOD1 PA8**(%%)  pin：  Corresponding downlink:  (% style="color:#037691" %)**06 00 00 xx**
528 +**~ AT+INTMOD1** ** PB14**  pin：  Corresponding downlink:  **06 00 00 xx**
551 551  
552 -(% style="color:#037691" %)** AT+INTMOD2 PA4**(%%)  pin：  Corresponding downlink: (% style="color:#037691" %)**06 00 01 xx**
530 +**~ AT+INTMOD2**  **PB15** pin：  Corresponding downlink:**  06 00 01 xx**
553 553  
554 -(% style="color:#037691" %)** AT+INTMOD3 PB15**(%%)  pin：  Corresponding downlink:  (% style="color:#037691" %)** 06 00 02 xx**
532 +**~ AT+INTMOD3**  **PA4**  pin：  Corresponding downlink:  ** 06 00 02 xx**
555 555  
534 +**AT+SETCNT=aa,bb** 
556 556  
557 -(% style="color:blue" %)**AT+SETCNT=aa,bb** 
536 +When AA is 1, set the count of PB14 pin to BB Corresponding downlink：09 01 bb bb bb bb
558 558  
559 -When AA is 1, set the count of PA8 pin to BB Corresponding downlink：09 01 bb bb bb bb
538 +When AA is 2, set the count of PB15 pin to BB Corresponding downlink：09 02 bb bb bb bb
560 560  
561 -When AA is 2, set the count of PA4 pin to BB Corresponding downlink：09 02 bb bb bb bb
562 562  
563 563  
564 -
565 565  === 2.3.3  ​Decode payload ===
566 566  
567 567  While using TTN V3 network, you can add the payload format to decode the payload.
... ... @@ -584,15 +584,15 @@
584 584  
585 585  ==== 2.3.3.2  Temperature (DS18B20) ====
586 586  
587 -If there is a DS18B20 connected to PC13 pin. The temperature will be uploaded in the payload.
564 +If there is a DS18B20 connected to PB3 pin. The temperature will be uploaded in the payload.
588 588  
589 589  More DS18B20 can check the [[3 DS18B20 mode>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#2.3.4MOD3D4283xDS18B2029]]
590 590  
591 -(% style="color:blue" %)**Connection:**
568 +**Connection:**
592 592  
593 593  [[image:image-20230512180718-8.png||height="538" width="647"]]
594 594  
595 -(% style="color:blue" %)**Example**:
572 +**Example**:
596 596  
597 597  If payload is: 0105H:  (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
598 598  
... ... @@ -610,54 +610,51 @@
610 610  
611 611  (% class="wikigeneratedid" id="H2.3.3.4A0AnalogueDigitalConverter28ADC29" %)
612 612  (((
613 -When the digital interrupt pin is set to AT+INTMODx=0, this pin is used as a digital input pin.
614 -
615 -(% style="color:red" %)**Note:**The maximum voltage input supports 3.6V.
590 +Note:The maximum voltage input supports 3.6V.
616 616  )))
617 617  
593 +(% class="wikigeneratedid" %)
618 618  ==== 2.3.3.4  Analogue Digital Converter (ADC) ====
619 619  
620 -The measuring range of the ADC is only about 0V to 1.1V The voltage resolution is about 0.24mv.
596 +The measuring range of the node is only about 0.1V to 1.1V The voltage resolution is about 0.24mv.
621 621  
622 -When the measured output voltage of the sensor is not within the range of 0V and 1.1V, the output voltage terminal of the sensor shall be divided The example in the following figure is to reduce the output voltage of the sensor by three times If it is necessary to reduce more times, calculate according to the formula in the figure and connect the corresponding resistance in series.
598 +When the measured output voltage of the sensor is not within the range of 0.1V and 1.1V, the output voltage terminal of the sensor shall be divided The example in the following figure is to reduce the output voltage of the sensor by three times If it is necessary to reduce more times, calculate according to the formula in the figure and connect the corresponding resistance in series.
623 623  
624 624  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220628150112-1.png?width=285&height=241&rev=1.1||alt="image-20220628150112-1.png" height="241" width="285"]]
625 625  
626 -(% style="color:red" %)**Note:**If the ADC type sensor needs to be powered by SN50_v3, it is recommended to use +5V to control its switch.Only sensors with low power consumption can be powered with VDD.
627 627  
628 -
629 629  ==== 2.3.3.5 Digital Interrupt ====
630 630  
631 -Digital Interrupt refers to pin PA8, and there are different trigger methods. When there is a trigger, the SN50v3 will send a packet to the server.
605 +Digital Interrupt refers to pin PB14, and there are different trigger methods. When there is a trigger, the SN50v3 will send a packet to the server.
632 632  
633 -(% style="color:blue" %)** Interrupt connection method:**
607 +**~ Interrupt connection method:**
634 634  
635 -[[image:image-20230513105351-5.png||height="147" width="485"]]
609 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379178634-321.png?rev=1.1||alt="1656379178634-321.png"]]
636 636  
637 -(% style="color:blue" %)**Example to use with door sensor :**
611 +**Example to use with door sensor :**
638 638  
639 639  The door sensor is shown at right. It is a two wire magnetic contact switch used for detecting the open/close status of doors or windows.
640 640  
641 641  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379210849-860.png?rev=1.1||alt="1656379210849-860.png"]]
642 642  
643 -When the two pieces are close to each other, the 2 wire output will be short or open (depending on the type), while if the two pieces are away from each other, the 2 wire output will be the opposite status. So we can use SN50_v3 interrupt interface to detect the status for the door or window.
617 +When the two pieces are close to each other, the 2 wire output will be short or open (depending on the type), while if the two pieces are away from each other, the 2 wire output will be the opposite status. So we can use LSN50 interrupt interface to detect the status for the door or window.
644 644  
645 -(% style="color:blue" %)** Below is the installation example:**
619 +**~ Below is the installation example:**
646 646  
647 -Fix one piece of the magnetic sensor to the door and connect the two pins to SN50_v3 as follows:
621 +Fix one piece of the magnetic sensor to the door and connect the two pins to LSN50 as follows:
648 648  
649 649  * (((
650 -One pin to SN50_v3's PA8 pin
624 +One pin to LSN50's PB14 pin
651 651  )))
652 652  * (((
653 -The other pin to SN50_v3's VDD pin
627 +The other pin to LSN50's VCC pin
654 654  )))
655 655  
656 -Install the other piece to the door. Find a place where the two pieces will be close to each other when the door is closed. For this particular magnetic sensor, when the door is closed, the output will be short, and PA8 will be at the VCC voltage.
630 +Install the other piece to the door. Find a place where the two pieces will be close to each other when the door is closed. For this particular magnetic sensor, when the door is closed, the output will be short, and PB14 will be at the VCC voltage.
657 657  
658 658  Door sensors have two types: ** NC (Normal close)** and **NO (normal open)**. The connection for both type sensors are the same. But the decoding for payload are reverse, user need to modify this in the IoT Server decoder.
659 659  
660 -When door sensor is shorted, there will extra power consumption in the circuit, the extra current is 3v3/R14 = 3v3/1Mohm = 3uA which can be ignored.
634 +When door sensor is shorted, there will extra power consumption in the circuit, the extra current is 3v3/R14 = 3v2/1Mohm = 0.3uA which can be ignored.
661 661  
662 662  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379283019-229.png?rev=1.1||alt="1656379283019-229.png"]]
663 663  
... ... @@ -667,7 +667,7 @@
667 667  
668 668  The command is:
669 669  
670 -(% style="color:blue" %)**AT+INTMOD1=1   ** (%%) ~/~/(more info about INMOD please refer** **[[**AT Command Manual**>>url:http://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/&file=DRAGINO_LSN50_AT_Commands_v1.5.1.pdf]]**. **)
644 +**AT+INTMOD=1       **~/~/(more info about INMOD please refer** **[[**AT Command Manual**>>url:http://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/&file=DRAGINO_LSN50_AT_Commands_v1.5.1.pdf]]**. **)
671 671  
672 672  Below shows some screen captures in TTN V3:
673 673  
... ... @@ -682,15 +682,14 @@
682 682  
683 683  The SDA and SCK are I2C interface lines. You can use these to connect to an I2C device and get the sensor data.
684 684  
685 -We have made an example to show how to use the I2C interface to connect to the SHT20/ SHT31 Temperature and Humidity Sensor.
659 +We have made an example to show how to use the I2C interface to connect to the SHT20 Temperature and Humidity Sensor.
686 686  
687 -Notice: Different I2C sensors have different I2C commands set and initiate process, if user want to use other I2C sensors, User need to re-write the source code to support those sensors. SHT20/ SHT31 code in SN50_v3 will be a good reference.
661 +Notice: Different I2C sensors have different I2C commands set and initiate process, if user want to use other I2C sensors, User need to re-write the source code to support those sensors. SHT20 code in SN50_v3 will be a good reference.
688 688  
689 689  Below is the connection to SHT20/ SHT31. The connection is as below:
690 690  
665 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220902163605-2.png?rev=1.1||alt="image-20220902163605-2.png"]]
691 691  
692 -[[image:image-20230513103633-3.png||height="448" width="716"]]
693 -
694 694  The device will be able to get the I2C sensor data now and upload to IoT Server.
695 695  
696 696  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379664142-345.png?rev=1.1||alt="1656379664142-345.png"]]
... ... @@ -708,7 +708,7 @@
708 708  
709 709  ==== 2.3.3.7  ​Distance Reading ====
710 710  
711 -Refer [[Ultrasonic Sensor section>>||anchor="H2.3.3.8UltrasonicSensor"]].
684 +Refer [[Ultrasonic Sensor section>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.8UltrasonicSensor]].
712 712  
713 713  
714 714  ==== 2.3.3.8 Ultrasonic Sensor ====
... ... @@ -715,15 +715,12 @@
715 715  
716 716  This Fundamental Principles of this sensor can be found at this link: [[https:~~/~~/wiki.dfrobot.com/Weather_-_proof_Ultrasonic_Sensor_with_Separate_Probe_SKU~~_~~__SEN0208>>url:https://wiki.dfrobot.com/Weather_-_proof_Ultrasonic_Sensor_with_Separate_Probe_SKU___SEN0208]]
717 717  
718 -The SN50_v3 detects the pulse width of the sensor and converts it to mm output. The accuracy will be within 1 centimeter. The usable range (the distance between the ultrasonic probe and the measured object) is between 24cm and 600cm.
691 +The LSN50 detects the pulse width of the sensor and converts it to mm output. The accuracy will be within 1 centimeter. The usable range (the distance between the ultrasonic probe and the measured object) is between 24cm and 600cm.
719 719  
720 -The working principle of this sensor is similar to the (% style="color:blue" %)**HC-SR04**(%%) ultrasonic sensor.
721 -
722 722  The picture below shows the connection:
723 723  
724 -[[image:image-20230512173903-6.png||height="596" width="715"]]
725 725  
726 -Connect to the SN50_v3 and run (% style="color:blue" %)**AT+MOD=2**(%%) to switch to ultrasonic mode (ULT).
696 +Connect to the LSN50 and run **AT+MOD=2** to switch to ultrasonic mode (ULT).
727 727  
728 728  The ultrasonic sensor uses the 8^^th^^ and 9^^th^^ byte for the measurement value.
729 729  
... ... @@ -731,8 +731,20 @@
731 731  
732 732  Distance:  Read: 0C2D(Hex) = 3117(D)  Value:  3117 mm=311.7 cm
733 733  
704 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656384895430-327.png?rev=1.1||alt="1656384895430-327.png"]]
734 734  
706 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656384913616-455.png?rev=1.1||alt="1656384913616-455.png"]]
735 735  
708 +You can see the serial output in ULT mode as below:
709 +
710 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656384939855-223.png?rev=1.1||alt="1656384939855-223.png"]]
711 +
712 +**In TTN V3 server:**
713 +
714 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656384961830-307.png?rev=1.1||alt="1656384961830-307.png"]]
715 +
716 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656384973646-598.png?rev=1.1||alt="1656384973646-598.png"]]
717 +
736 736  ==== 2.3.3.9  Battery Output - BAT pin ====
737 737  
738 738  The BAT pin of SN50v3 is connected to the Battery directly. If users want to use BAT pin to power an external sensor. User need to make sure the external sensor is of low power consumption. Because the BAT pin is always open. If the external sensor is of high power consumption. the battery of SN50v3-LB will run out very soon.
... ... @@ -744,7 +744,7 @@
744 744  
745 745  The 5V output time can be controlled by AT Command.
746 746  
747 -(% style="color:blue" %)**AT+5VT=1000**
729 +**AT+5VT=1000**
748 748  
749 749  Means set 5V valid time to have 1000ms. So the real 5V output will actually have 1000ms + sampling time for other sensors.
750 750  
... ... @@ -756,9 +756,9 @@
756 756  
757 757  MOD=1 support this sensor. The sensor value is in the 8^^th^^ and 9^^th^^ bytes.
758 758  
759 -[[image:image-20230512172447-4.png||height="416" width="712"]]
741 +[[image:image-20230512172447-4.png||height="593" width="1015"]]
760 760  
761 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220628110012-12.png?rev=1.1||alt="image-20220628110012-12.png" height="361" width="953"]]
743 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220628110012-12.png?rev=1.1||alt="image-20220628110012-12.png"]]
762 762  
763 763  
764 764  ==== 2.3.3.12  Working MOD ====
... ... @@ -775,11 +775,7 @@
775 775  * 3: MOD4
776 776  * 4: MOD5
777 777  * 5: MOD6
778 -* 6: MOD7
779 -* 7: MOD8
780 -* 8: MOD9
781 781  
782 -
783 783  == 2.4 Payload Decoder file ==
784 784  
785 785  
... ... @@ -787,7 +787,7 @@
787 787  
788 788  In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from:
789 789  
790 -[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/SN50_v3-LB>>https://github.com/dragino/dragino-end-node-decoder/tree/main/SN50_v3-LB]]
768 +[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/LSN50v2-S31%26S31B >>https://github.com/dragino/dragino-end-node-decoder/tree/main/LSN50v2-S31%26S31B]]
791 791  
792 792  
793 793  
... ... @@ -831,6 +831,7 @@
831 831  
832 832  === 3.3.1 Set Transmit Interval Time ===
833 833  
812 +
834 834  Feature: Change LoRaWAN End Node Transmit Interval.
835 835  
836 836  (% style="color:blue" %)**AT Command: AT+TDC**
... ... @@ -856,10 +856,9 @@
856 856  * Example 1: Downlink Payload: 0100001E  ~/~/  Set Transmit Interval (TDC) = 30 seconds
857 857  * Example 2: Downlink Payload: 0100003C  ~/~/  Set Transmit Interval (TDC) = 60 seconds
858 858  
859 -
860 860  === 3.3.2 Get Device Status ===
861 861  
862 -Send a LoRaWAN downlink to ask the device to send its status.
840 +Send a LoRaWAN downlink to ask device send Alarm settings.
863 863  
864 864  (% style="color:blue" %)**Downlink Payload:  **(%%)0x26 01
865 865  
... ... @@ -866,20 +866,21 @@
866 866  Sensor will upload Device Status via FPORT=5. See payload section for detail.
867 867  
868 868  
869 -=== 3.3.3 Set Interrupt Mode ===
847 +=== 3.3.7 Set Interrupt Mode ===
870 870  
849 +
871 871  Feature, Set Interrupt mode for GPIO_EXIT.
872 872  
873 -(% style="color:blue" %)**AT Command: AT+INTMOD1，AT+INTMOD2，AT+INTMOD3**
852 +(% style="color:blue" %)**AT Command: AT+INTMOD**
874 874  
875 875  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
876 876  |=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
877 -|(% style="width:154px" %)AT+INTMOD1=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
856 +|(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
878 878  0
879 879  OK
880 880  the mode is 0 =Disable Interrupt
881 881  )))
882 -|(% style="width:154px" %)AT+INTMOD1=2|(% style="width:196px" %)(((
861 +|(% style="width:154px" %)AT+INTMOD=2|(% style="width:196px" %)(((
883 883  Set Transmit Interval
884 884  0. (Disable Interrupt),
885 885  ~1. (Trigger by rising and falling edge)
... ... @@ -886,13 +886,7 @@
886 886  2. (Trigger by falling edge)
887 887  3. (Trigger by rising edge)
888 888  )))|(% style="width:157px" %)OK
889 -|(% style="width:154px" %)AT+INTMOD2=3|(% style="width:196px" %)(((
890 -Set Transmit Interval
891 891  
892 -trigger by rising edge.
893 -)))|(% style="width:157px" %)OK
894 -|(% style="width:154px" %)AT+INTMOD3=0|(% style="width:196px" %)Disable Interrupt|(% style="width:157px" %)OK
895 -
896 896  (% style="color:blue" %)**Downlink Command: 0x06**
897 897  
898 898  Format: Command Code (0x06) followed by 3 bytes.
... ... @@ -899,116 +899,9 @@
899 899  
900 900  This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
901 901  
902 -* Example 1: Downlink Payload: 06000000  **~-~-->**  AT+INTMOD1=0
903 -* Example 2: Downlink Payload: 06000003  **~-~-->**  AT+INTMOD1=3
904 -* Example 3: Downlink Payload: 06000102  **~-~-->**  AT+INTMOD2=2
905 -* Example 4: Downlink Payload: 06000201  **~-~-->**  AT+INTMOD3=1
875 +* Example 1: Downlink Payload: 06000000  ~/~/  Turn off interrupt mode
876 +* Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
906 906  
907 -
908 -=== 3.3.4 Set Power Output Duration ===
909 -
910 -Control the output duration 5V . Before each sampling, device will
911 -
912 -~1. first enable the power output to external sensor,
913 -
914 -2. keep it on as per duration, read sensor value and construct uplink payload
915 -
916 -3. final, close the power output.
917 -
918 -(% style="color:blue" %)**AT Command: AT+5VT**
919 -
920 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
921 -|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
922 -|(% style="width:154px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:157px" %)(((
923 -500(default)
924 -OK
925 -)))
926 -|(% style="width:154px" %)AT+5VT=1000|(% style="width:196px" %)(((
927 -Close after a delay of 1000 milliseconds.
928 -)))|(% style="width:157px" %)OK
929 -
930 -(% style="color:blue" %)**Downlink Command: 0x07**
931 -
932 -Format: Command Code (0x07) followed by 2 bytes.
933 -
934 -The first and second bytes are the time to turn on.
935 -
936 -* Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
937 -* Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
938 -
939 -
940 -=== 3.3.5 Set Weighing parameters ===
941 -
942 -Feature: Working mode 5 is effective, weight initialization and weight factor setting of HX711.
943 -
944 -(% style="color:blue" %)**AT Command: AT+WEIGRE,AT+WEIGAP**
945 -
946 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
947 -|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
948 -|(% style="width:154px" %)AT+WEIGRE|(% style="width:196px" %)Weight is initialized to 0.|(% style="width:157px" %)OK
949 -|(% style="width:154px" %)AT+WEIGAP=？|(% style="width:196px" %)400.0|(% style="width:157px" %)OK(default)
950 -|(% style="width:154px" %)AT+WEIGAP=400.3|(% style="width:196px" %)Set the factor to 400.3.|(% style="width:157px" %)OK
951 -
952 -(% style="color:blue" %)**Downlink Command: 0x08**
953 -
954 -Format: Command Code (0x08) followed by 2 bytes or 4 bytes.
955 -
956 -Use AT+WEIGRE when the first byte is 1, only 1 byte. When it is 2, use AT+WEIGAP, there are 3 bytes.
957 -
958 -The second and third bytes are multiplied by 10 times to be the AT+WEIGAP value.
959 -
960 -* Example 1: Downlink Payload: 0801  **~-~-->**  AT+WEIGRE
961 -* Example 2: Downlink Payload: 08020FA3  **~-~-->**  AT+WEIGAP=400.3
962 -* Example 3: Downlink Payload: 08020FA0  **~-~-->**  AT+WEIGAP=400.0
963 -
964 -
965 -=== 3.3.6 Set Digital pulse count value ===
966 -
967 -Feature: Set the pulse count value.
968 -
969 -Count 1 is PA8 pin of mode 6 and mode 9. Count 2 is PA4 pin of mode 9.
970 -
971 -(% style="color:blue" %)**AT Command: AT+SETCNT**
972 -
973 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
974 -|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
975 -|(% style="width:154px" %)AT+SETCNT=1,100|(% style="width:196px" %)Initialize the count value 1 to 100.|(% style="width:157px" %)OK
976 -|(% style="width:154px" %)AT+SETCNT=2,0|(% style="width:196px" %)Initialize the count value 2 to 0.|(% style="width:157px" %)OK
977 -
978 -(% style="color:blue" %)**Downlink Command: 0x09**
979 -
980 -Format: Command Code (0x09) followed by 5 bytes.
981 -
982 -The first byte is to select which count value to initialize, and the next four bytes are the count value to be initialized.
983 -
984 -* Example 1: Downlink Payload: 090100000000  **~-~-->**  AT+SETCNT=1,0
985 -* Example 2: Downlink Payload: 0902000003E8  **~-~-->**  AT+SETCNT=2,1000
986 -
987 -
988 -=== 3.3.7 Set Workmode ===
989 -
990 -Feature: Switch working mode.
991 -
992 -(% style="color:blue" %)**AT Command: AT+MOD**
993 -
994 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
995 -|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
996 -|(% style="width:154px" %)AT+MOD=?|(% style="width:196px" %)Get the current working mode.|(% style="width:157px" %)(((
997 -OK
998 -)))
999 -|(% style="width:154px" %)AT+MOD=4|(% style="width:196px" %)Set the working mode to 3DS18B20s.|(% style="width:157px" %)(((
1000 -OK
1001 -Attention:Take effect after ATZ
1002 -)))
1003 -
1004 -(% style="color:blue" %)**Downlink Command: 0x0A**
1005 -
1006 -Format: Command Code (0x0A) followed by 1 bytes.
1007 -
1008 -* Example 1: Downlink Payload: 0A01  **~-~-->**  AT+MOD=1
1009 -* Example 2: Downlink Payload: 0A04  **~-~-->**  AT+MOD=4
1010 -
1011 -
1012 1012  = 4. Battery & Power Consumption =
1013 1013  
1014 1014  
... ... @@ -1042,6 +1042,7 @@
1042 1042  * **[[Hardware Source Files>>https://github.com/dragino/Lora/tree/master/LSN50/v3.0]].**
1043 1043  * **[[Software Source Code & Compile instruction>>https://github.com/dragino/SN50v3]].**
1044 1044  
911 +
1045 1045  = 7. Order Info =
1046 1046  
1047 1047  
... ... @@ -1082,5 +1082,4 @@
1082 1082  
1083 1083  
1084 1084  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1085 -
1086 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.cc>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.cc]]
952 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
image-20230513111255-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -70.4 KB
Content
image-20230513134006-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -1.9 MB
Content
image-20230515135611-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -948.0 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0