Last modified by Bei Jinggeng on 2025/01/10 15:51
<
From version < 43.40 >
edited by Xiaoling
on 2023/05/16 15:00
To version < 39.1 >
edited by Saxer Lin
on 2023/05/13 13:40
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -SN50v3-LB LoRaWAN Sensor Node User Manual
1 +SN50v3-LB User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Saxer
Content
... ... @@ -1,5 +1,4 @@
1 -(% style="text-align:center" %)
2 -[[image:image-20230515135611-1.jpeg||height="589" width="589"]]
1 +[[image:image-20230511201248-1.png||height="403" width="489"]]
3 3  
4 4  
5 5  
... ... @@ -16,15 +16,18 @@
16 16  
17 17  == 1.1 What is SN50v3-LB LoRaWAN Generic Node ==
18 18  
19 -
20 20  (% style="color:blue" %)**SN50V3-LB **(%%)LoRaWAN Sensor Node is a Long Range LoRa Sensor Node. It is designed for outdoor use and powered by (% style="color:blue" %)** 8500mA Li/SOCl2 battery**(%%) for long term use.SN50V3-LB is designed to facilitate developers to quickly deploy industrial level LoRa and IoT solutions. It help users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to program, create and connect your things everywhere.
21 21  
20 +
22 22  (% style="color:blue" %)**SN50V3-LB wireless part**(%%) is based on SX1262 allows the user to send data and reach extremely long ranges at low data-rates.It provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, and so on.
23 23  
23 +
24 24  (% style="color:blue" %)**SN50V3-LB **(%%)has a powerful 48Mhz ARM microcontroller with 256KB flash and 64KB RAM. It has multiplex I/O pins to connect to different sensors.
25 25  
26 +
26 26  (% style="color:blue" %)**SN50V3-LB**(%%) has a built-in BLE module, user can configure the sensor remotely via Mobile Phone. It also support OTA upgrade via private LoRa protocol for easy maintaining.
27 27  
29 +
28 28  SN50V3-LB is the 3^^rd^^ generation of LSN50 series generic sensor node from Dragino. It is an (% style="color:blue" %)**open source project**(%%) and has a mature LoRaWAN stack and application software. User can use the pre-load software for their IoT projects or easily customize the software for different requirements.
29 29  
30 30  
... ... @@ -42,7 +42,6 @@
42 42  
43 43  == 1.3 Specification ==
44 44  
45 -
46 46  (% style="color:#037691" %)**Common DC Characteristics:**
47 47  
48 48  * Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
... ... @@ -79,7 +79,6 @@
79 79  
80 80  == 1.4 Sleep mode and working mode ==
81 81  
82 -
83 83  (% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
84 84  
85 85  (% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
... ... @@ -137,7 +137,6 @@
137 137  
138 138  == Hole Option ==
139 139  
140 -
141 141  SN50v3-LB has different hole size options for different size sensor cable. The options provided are M12, M16 and M20. The definition is as below:
142 142  
143 143  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220627104757-1.png?rev=1.1||alt="image-20220627104757-1.png"]]
... ... @@ -291,21 +291,31 @@
291 291  
292 292  ==== 2.3.2.1  MOD~=1 (Default Mode) ====
293 293  
294 -
295 295  In this mode, uplink payload includes in total 11 bytes. Uplink packets use FPORT=2.
296 296  
297 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
298 -|(% style="width:50px;background-color:#D9E2F3;color:#0070C0" %)**Size(bytes)**|(% style="width:20px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:100px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:40px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:90px;background-color:#D9E2F3;color:#0070C0" %)**1**|(% style="width:130px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:90px;background-color:#D9E2F3;color:#0070C0" %)**2**
299 -|**Value**|Bat|(% style="width:191px" %)(((
300 -Temperature(DS18B20)(PC13)
301 -)))|(% style="width:78px" %)(((
302 -ADC(PA4)
295 +|**Size(bytes)**|**2**|**2**|**2**|(% style="width:216px" %)**1**|(% style="width:342px" %)**2**|(% style="width:171px" %)**2**
296 +|**Value**|Bat|(((
297 +Temperature(DS18B20)
298 +
299 +(PC13)
300 +)))|(((
301 +ADC
302 +
303 +(PA4)
303 303  )))|(% style="width:216px" %)(((
304 -Digital in(PB15)&Digital Interrupt(PA8)
305 -)))|(% style="width:308px" %)(((
306 -Temperature(SHT20 or SHT31 or BH1750 Illumination Sensor)
307 -)))|(% style="width:154px" %)(((
308 -Humidity(SHT20 or SHT31)
305 +Digital in(PB15) &
306 +
307 +Digital Interrupt(PA8)
308 +
309 +
310 +)))|(% style="width:342px" %)(((
311 +Temperature
312 +
313 +(SHT20 or SHT31 or BH1750 Illumination Sensor)
314 +)))|(% style="width:171px" %)(((
315 +Humidity
316 +
317 +(SHT20 or SHT31)
309 309  )))
310 310  
311 311  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220627150949-6.png?rev=1.1||alt="image-20220627150949-6.png"]]
... ... @@ -315,26 +315,33 @@
315 315  
316 316  This mode is target to measure the distance. The payload of this mode is totally 11 bytes. The 8^^th^^ and 9^^th^^ bytes is for the distance.
317 317  
318 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
319 -|(% style="width:40px;background-color:#D9E2F3;color:#0070C0" %)**Size(bytes)**|(% style="width:40px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:110px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:40px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:110px;background-color:#D9E2F3;color:#0070C0" %)**1**|(% style="width:140px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:40px;background-color:#D9E2F3;color:#0070C0" %)**2**
320 -|**Value**|BAT|(% style="width:196px" %)(((
321 -Temperature(DS18B20)(PC13)
322 -)))|(% style="width:87px" %)(((
323 -ADC(PA4)
324 -)))|(% style="width:189px" %)(((
325 -Digital in(PB15) & Digital Interrupt(PA8)
326 -)))|(% style="width:208px" %)(((
327 -Distance measure by:1) LIDAR-Lite V3HP
328 -Or 2) Ultrasonic Sensor
329 -)))|(% style="width:117px" %)Reserved
327 +|**Size(bytes)**|**2**|**2**|**2**|**1**|**2**|**2**
328 +|**Value**|BAT|(((
329 +Temperature(DS18B20)
330 330  
331 +(PC13)
332 +)))|(((
333 +ADC
334 +
335 +(PA4)
336 +)))|(((
337 +Digital in(PB15) &
338 +
339 +Digital Interrupt(PA8)
340 +)))|(((
341 +Distance measure by:
342 +1) LIDAR-Lite V3HP
343 +Or
344 +2) Ultrasonic Sensor
345 +)))|Reserved
346 +
331 331  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656324539647-568.png?rev=1.1||alt="1656324539647-568.png"]]
332 332  
333 -(% style="color:blue" %)**Connection of LIDAR-Lite V3HP:**
349 +**Connection of LIDAR-Lite V3HP:**
334 334  
335 335  [[image:image-20230512173758-5.png||height="563" width="712"]]
336 336  
337 -(% style="color:blue" %)**Connection to Ultrasonic Sensor:**
353 +**Connection to Ultrasonic Sensor:**
338 338  
339 339  Need to remove R1 and R2 resistors to get low power,otherwise there will be 240uA standby current.
340 340  
... ... @@ -342,19 +342,24 @@
342 342  
343 343  For the connection to TF-Mini or TF-Luna , MOD2 payload is as below:
344 344  
345 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
346 -|(% style="width:50px;background-color:#D9E2F3;color:#0070C0" %)**Size(bytes)**|(% style="width:20px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:100px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:100px;background-color:#D9E2F3;color:#0070C0" %)**1**|(% style="width:50px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:120px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:80px;background-color:#D9E2F3;color:#0070C0" %)**2**
347 -|**Value**|BAT|(% style="width:183px" %)(((
348 -Temperature(DS18B20)(PC13)
349 -)))|(% style="width:173px" %)(((
350 -Digital in(PB15) & Digital Interrupt(PA8)
351 -)))|(% style="width:84px" %)(((
352 -ADC(PA4)
353 -)))|(% style="width:323px" %)(((
361 +|**Size(bytes)**|**2**|**2**|**1**|**2**|**2**|**2**
362 +|**Value**|BAT|(((
363 +Temperature(DS18B20)
364 +
365 +(PC13)
366 +)))|(((
367 +Digital in(PB15) &
368 +
369 +Digital Interrupt(PA8)
370 +)))|(((
371 +ADC
372 +
373 +(PA4)
374 +)))|(((
354 354  Distance measure by:1)TF-Mini plus LiDAR
355 355  Or 
356 356  2) TF-Luna LiDAR
357 -)))|(% style="width:188px" %)Distance signal  strength
378 +)))|Distance signal  strength
358 358  
359 359  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656376779088-686.png?rev=1.1||alt="1656376779088-686.png"]]
360 360  
... ... @@ -375,22 +375,32 @@
375 375  
376 376  This mode has total 12 bytes. Include 3 x ADC + 1x I2C
377 377  
378 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
379 -|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
399 +(% style="width:1031px" %)
400 +|=(((
380 380  **Size(bytes)**
381 -)))|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 140px;background-color:#D9E2F3;color:#0070C0" %)2|=(% style="width: 120px;background-color:#D9E2F3;color:#0070C0" %)2|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)1
402 +)))|=(% style="width: 68px;" %)**2**|=(% style="width: 75px;" %)**2**|=**2**|=**1**|=(% style="width: 304px;" %)2|=(% style="width: 163px;" %)2|=(% style="width: 53px;" %)1
382 382  |**Value**|(% style="width:68px" %)(((
383 -ADC1(PA4)
404 +ADC1
405 +
406 +(PA4)
384 384  )))|(% style="width:75px" %)(((
385 -ADC2(PA5)
408 +ADC2
409 +
410 +(PA5)
386 386  )))|(((
387 -ADC3(PA8)
412 +ADC3
413 +
414 +(PA8)
388 388  )))|(((
389 389  Digital Interrupt(PB15)
390 390  )))|(% style="width:304px" %)(((
391 -Temperature(SHT20 or SHT31 or BH1750 Illumination Sensor)
418 +Temperature
419 +
420 +(SHT20 or SHT31 or BH1750 Illumination Sensor)
392 392  )))|(% style="width:163px" %)(((
393 -Humidity(SHT20 or SHT31)
422 +Humidity
423 +
424 +(SHT20 or SHT31)
394 394  )))|(% style="width:53px" %)Bat
395 395  
396 396  [[image:image-20230513110214-6.png]]
... ... @@ -401,20 +401,26 @@
401 401  
402 402  This mode has total 11 bytes. As shown below:
403 403  
404 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
405 -|(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**Size(bytes)**|(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**1**|(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**2**
435 +(% style="width:1017px" %)
436 +|**Size(bytes)**|**2**|(% style="width:186px" %)**2**|(% style="width:82px" %)**2**|(% style="width:210px" %)**1**|(% style="width:191px" %)**2**|(% style="width:183px" %)**2**
406 406  |**Value**|BAT|(% style="width:186px" %)(((
407 -Temperature1(DS18B20)(PC13)
438 +Temperature1(DS18B20)
439 +(PC13)
408 408  )))|(% style="width:82px" %)(((
409 -ADC(PA4)
441 +ADC
442 +
443 +(PA4)
410 410  )))|(% style="width:210px" %)(((
411 -Digital in(PB15) & Digital Interrupt(PA8) 
445 +Digital in(PB15) &
446 +
447 +Digital Interrupt(PA8) 
412 412  )))|(% style="width:191px" %)Temperature2(DS18B20)
413 -(PB9)|(% style="width:183px" %)Temperature3(DS18B20)(PB8)
449 +(PB9)|(% style="width:183px" %)Temperature3(DS18B20)
450 +(PB8)
414 414  
415 415  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656377606181-607.png?rev=1.1||alt="1656377606181-607.png"]]
416 416  
417 -[[image:image-20230513134006-1.png||height="559" width="736"]]
454 +[[image:image-20230513134006-1.png||height="743" width="978"]]
418 418  
419 419  
420 420  ==== 2.3.2.5  MOD~=5(Weight Measurement by HX711) ====
... ... @@ -437,19 +437,25 @@
437 437  
438 438  Check the response of this command and adjust the value to match the real value for thing.
439 439  
440 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
441 -|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
477 +(% style="width:982px" %)
478 +|=(((
442 442  **Size(bytes)**
443 -)))|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 150px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 200px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**4**
444 -|**Value**|BAT|(% style="width:193px" %)(((
480 +)))|=**2**|=(% style="width: 282px;" %)**2**|=(% style="width: 119px;" %)**2**|=(% style="width: 279px;" %)**1**|=(% style="width: 106px;" %)**4**
481 +|**Value**|BAT|(% style="width:282px" %)(((
445 445  Temperature(DS18B20)
483 +
446 446  (PC13)
447 -)))|(% style="width:85px" %)(((
448 -ADC(PA4)
449 -)))|(% style="width:186px" %)(((
485 +
486 +
487 +)))|(% style="width:119px" %)(((
488 +ADC
489 +
490 +(PA4)
491 +)))|(% style="width:279px" %)(((
450 450  Digital in(PB15) &
493 +
451 451  Digital Interrupt(PA8)
452 -)))|(% style="width:100px" %)Weight
495 +)))|(% style="width:106px" %)Weight
453 453  
454 454  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220820120036-2.png?width=1003&height=469&rev=1.1||alt="image-20220820120036-2.png" height="469" width="1003"]]
455 455  
... ... @@ -462,18 +462,26 @@
462 462  
463 463  [[image:image-20230512181814-9.png||height="543" width="697"]]
464 464  
465 -(% style="color:red" %)**Note:** LoRaWAN wireless transmission will infect the PIR sensor. Which cause the counting value increase +1 for every uplink. User can change PIR sensor or put sensor away of the SN50_v3 to avoid this happen.
508 +**Note:** LoRaWAN wireless transmission will infect the PIR sensor. Which cause the counting value increase +1 for every uplink. User can change PIR sensor or put sensor away of the SN50_v3 to avoid this happen.
466 466  
467 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
468 -|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**Size(bytes)**|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 220px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 80px;background-color:#D9E2F3;color:#0070C0" %)**4**
510 +(% style="width:961px" %)
511 +|=**Size(bytes)**|=**2**|=(% style="width: 256px;" %)**2**|=(% style="width: 108px;" %)**2**|=(% style="width: 126px;" %)**1**|=(% style="width: 145px;" %)**4**
469 469  |**Value**|BAT|(% style="width:256px" %)(((
470 -Temperature(DS18B20)(PC13)
513 +Temperature(DS18B20)
514 +
515 +(PC13)
471 471  )))|(% style="width:108px" %)(((
472 -ADC(PA4)
517 +ADC
518 +
519 +(PA4)
473 473  )))|(% style="width:126px" %)(((
474 -Digital in(PB15)
521 +Digital in
522 +
523 +(PB15)
475 475  )))|(% style="width:145px" %)(((
476 -Count(PA8)
525 +Count
526 +
527 +(PA8)
477 477  )))
478 478  
479 479  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656378441509-171.png?rev=1.1||alt="1656378441509-171.png"]]
... ... @@ -481,38 +481,47 @@
481 481  
482 482  ==== 2.3.2.7  MOD~=7 (Three interrupt contact modes) ====
483 483  
484 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
485 -|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
535 +|=(((
486 486  **Size(bytes)**
487 -)))|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)1|=(% style="width: 40px;background-color:#D9E2F3;color:#0070C0" %)2
488 -|**Value**|BAT|(% style="width:188px" %)(((
537 +)))|=**2**|=**2**|=**2**|=**1**|=**1**|=1|=2
538 +|**Value**|BAT|(((
489 489  Temperature(DS18B20)
540 +
490 490  (PC13)
491 -)))|(% style="width:83px" %)(((
492 -ADC(PA5)
493 -)))|(% style="width:184px" %)(((
542 +)))|(((
543 +ADC
544 +
545 +(PA5)
546 +)))|(((
494 494  Digital Interrupt1(PA8)
495 -)))|(% style="width:186px" %)Digital Interrupt2(PA4)|(% style="width:197px" %)Digital Interrupt3(PB15)|(% style="width:100px" %)Reserved
548 +)))|Digital Interrupt2(PA4)|Digital Interrupt3(PB15)|Reserved
496 496  
497 497  [[image:image-20230513111203-7.png||height="324" width="975"]]
498 498  
499 499  ==== 2.3.2.8  MOD~=8 （3ADC+1DS18B20） ====
500 500  
501 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
502 -|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
554 +(% style="width:917px" %)
555 +|=(((
503 503  **Size(bytes)**
504 -)))|=(% style="width: 30px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 120px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 70px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 120px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 70px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 70px;background-color:#D9E2F3;color:#0070C0" %)2
557 +)))|=**2**|=(% style="width: 207px;" %)**2**|=(% style="width: 94px;" %)**2**|=(% style="width: 198px;" %)**1**|=(% style="width: 84px;" %)**2**|=(% style="width: 79px;" %)2
505 505  |**Value**|BAT|(% style="width:207px" %)(((
506 506  Temperature(DS18B20)
560 +
507 507  (PC13)
508 508  )))|(% style="width:94px" %)(((
509 -ADC1(PA4)
563 +ADC1
564 +
565 +(PA4)
510 510  )))|(% style="width:198px" %)(((
511 511  Digital Interrupt(PB15)
512 512  )))|(% style="width:84px" %)(((
513 -ADC2(PA5)
514 -)))|(% style="width:82px" %)(((
515 -ADC3(PA8)
569 +ADC2
570 +
571 +(PA5)
572 +)))|(% style="width:79px" %)(((
573 +ADC3
574 +
575 +(PA8)
516 516  )))
517 517  
518 518  [[image:image-20230513111231-8.png||height="335" width="900"]]
... ... @@ -520,31 +520,39 @@
520 520  
521 521  ==== 2.3.2.9  MOD~=9 (3DS18B20+ two Interrupt count mode) ====
522 522  
523 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
524 -|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
583 +(% style="width:1010px" %)
584 +|=(((
525 525  **Size(bytes)**
526 -)))|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 80px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)4|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)4
586 +)))|=**2**|=**2**|=**2**|=**1**|=(% style="width: 193px;" %)**2**|=(% style="width: 78px;" %)4|=(% style="width: 78px;" %)4
527 527  |**Value**|BAT|(((
528 528  Temperature1(DS18B20)
589 +
529 529  (PC13)
530 530  )))|(((
531 531  Temperature2(DS18B20)
593 +
532 532  (PB9)
533 533  )))|(((
534 534  Digital Interrupt
597 +
535 535  (PB15)
536 536  )))|(% style="width:193px" %)(((
537 537  Temperature3(DS18B20)
601 +
538 538  (PB8)
539 539  )))|(% style="width:78px" %)(((
540 -Count1(PA8)
604 +Count1
605 +
606 +(PA8)
541 541  )))|(% style="width:78px" %)(((
542 -Count2(PA4)
608 +Count2
609 +
610 +(PA4)
543 543  )))
544 544  
545 545  [[image:image-20230513111255-9.png||height="341" width="899"]]
546 546  
547 -(% style="color:blue" %)**The newly added AT command is issued correspondingly:**
615 +**The newly added AT command is issued correspondingly:**
548 548  
549 549  **~ AT+INTMOD1** ** PA8**  pin：  Corresponding downlink:  **06 00 00 xx**
550 550  
... ... @@ -582,7 +582,7 @@
582 582  
583 583  ==== 2.3.3.2  Temperature (DS18B20) ====
584 584  
585 -If there is a DS18B20 connected to PC13 pin. The temperature will be uploaded in the payload.
653 +If there is a DS18B20 connected to PB3 pin. The temperature will be uploaded in the payload.
586 586  
587 587  More DS18B20 can check the [[3 DS18B20 mode>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#2.3.4MOD3D4283xDS18B2029]]
588 588  
... ... @@ -610,7 +610,7 @@
610 610  (((
611 611  When the digital interrupt pin is set to AT+INTMODx=0, this pin is used as a digital input pin.
612 612  
613 -(% style="color:red" %)**Note:**The maximum voltage input supports 3.6V.
681 +**Note:**The maximum voltage input supports 3.6V.
614 614  )))
615 615  
616 616  ==== 2.3.3.4  Analogue Digital Converter (ADC) ====
... ... @@ -621,18 +621,17 @@
621 621  
622 622  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220628150112-1.png?width=285&height=241&rev=1.1||alt="image-20220628150112-1.png" height="241" width="285"]]
623 623  
624 -(% style="color:red" %)**Note:**If the ADC type sensor needs to be powered by SN50_v3, it is recommended to use +5V to control its switch.Only sensors with low power consumption can be powered with VDD.
692 +**Note:**If the ADC type sensor needs to be powered by SN50_v3, it is recommended to use +5V to control its switch.Only sensors with low power consumption can be powered with VDD.
625 625  
626 -
627 627  ==== 2.3.3.5 Digital Interrupt ====
628 628  
629 629  Digital Interrupt refers to pin PA8, and there are different trigger methods. When there is a trigger, the SN50v3 will send a packet to the server.
630 630  
631 -(% style="color:blue" %)**~ Interrupt connection method:**
698 +**~ Interrupt connection method:**
632 632  
633 633  [[image:image-20230513105351-5.png||height="147" width="485"]]
634 634  
635 -(% style="color:blue" %)**Example to use with door sensor :**
702 +**Example to use with door sensor :**
636 636  
637 637  The door sensor is shown at right. It is a two wire magnetic contact switch used for detecting the open/close status of doors or windows.
638 638  
... ... @@ -640,7 +640,7 @@
640 640  
641 641  When the two pieces are close to each other, the 2 wire output will be short or open (depending on the type), while if the two pieces are away from each other, the 2 wire output will be the opposite status. So we can use SN50_v3 interrupt interface to detect the status for the door or window.
642 642  
643 -(% style="color:blue" %)**~ Below is the installation example:**
710 +**~ Below is the installation example:**
644 644  
645 645  Fix one piece of the magnetic sensor to the door and connect the two pins to SN50_v3 as follows:
646 646  
... ... @@ -665,7 +665,7 @@
665 665  
666 666  The command is:
667 667  
668 -(% style="color:blue" %)**AT+INTMOD1=1   ** (%%) ~/~/(more info about INMOD please refer** **[[**AT Command Manual**>>url:http://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/&file=DRAGINO_LSN50_AT_Commands_v1.5.1.pdf]]**. **)
735 +**AT+INTMOD1=1       **~/~/(more info about INMOD please refer** **[[**AT Command Manual**>>url:http://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/&file=DRAGINO_LSN50_AT_Commands_v1.5.1.pdf]]**. **)
669 669  
670 670  Below shows some screen captures in TTN V3:
671 671  
... ... @@ -680,14 +680,14 @@
680 680  
681 681  The SDA and SCK are I2C interface lines. You can use these to connect to an I2C device and get the sensor data.
682 682  
683 -We have made an example to show how to use the I2C interface to connect to the SHT20/ SHT31 Temperature and Humidity Sensor.
750 +We have made an example to show how to use the I2C interface to connect to the SHT20 Temperature and Humidity Sensor.
684 684  
685 -Notice: Different I2C sensors have different I2C commands set and initiate process, if user want to use other I2C sensors, User need to re-write the source code to support those sensors. SHT20/ SHT31 code in SN50_v3 will be a good reference.
752 +Notice: Different I2C sensors have different I2C commands set and initiate process, if user want to use other I2C sensors, User need to re-write the source code to support those sensors. SHT20 code in SN50_v3 will be a good reference.
686 686  
687 687  Below is the connection to SHT20/ SHT31. The connection is as below:
688 688  
689 689  
690 -[[image:image-20230513103633-3.png||height="448" width="716"]]
757 +[[image:image-20230513103633-3.png||height="636" width="1017"]]
691 691  
692 692  The device will be able to get the I2C sensor data now and upload to IoT Server.
693 693  
... ... @@ -742,7 +742,7 @@
742 742  
743 743  The 5V output time can be controlled by AT Command.
744 744  
745 -(% style="color:blue" %)**AT+5VT=1000**
812 +**AT+5VT=1000**
746 746  
747 747  Means set 5V valid time to have 1000ms. So the real 5V output will actually have 1000ms + sampling time for other sensors.
748 748  
... ... @@ -754,9 +754,9 @@
754 754  
755 755  MOD=1 support this sensor. The sensor value is in the 8^^th^^ and 9^^th^^ bytes.
756 756  
757 -[[image:image-20230512172447-4.png||height="416" width="712"]]
824 +[[image:image-20230512172447-4.png||height="593" width="1015"]]
758 758  
759 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220628110012-12.png?rev=1.1||alt="image-20220628110012-12.png" height="361" width="953"]]
826 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220628110012-12.png?rev=1.1||alt="image-20220628110012-12.png"]]
760 760  
761 761  
762 762  ==== 2.3.3.12  Working MOD ====
... ... @@ -777,8 +777,6 @@
777 777  * 7: MOD8
778 778  * 8: MOD9
779 779  
780 -
781 -
782 782  == 2.4 Payload Decoder file ==
783 783  
784 784  
... ... @@ -786,7 +786,7 @@
786 786  
787 787  In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from:
788 788  
789 -[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/SN50_v3-LB>>https://github.com/dragino/dragino-end-node-decoder/tree/main/SN50_v3-LB]]
854 +[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/LSN50v2-S31%26S31B >>https://github.com/dragino/dragino-end-node-decoder/tree/main/LSN50v2-S31%26S31B]]
790 790  
791 791  
792 792  
... ... @@ -830,6 +830,7 @@
830 830  
831 831  === 3.3.1 Set Transmit Interval Time ===
832 832  
898 +
833 833  Feature: Change LoRaWAN End Node Transmit Interval.
834 834  
835 835  (% style="color:blue" %)**AT Command: AT+TDC**
... ... @@ -855,11 +855,9 @@
855 855  * Example 1: Downlink Payload: 0100001E  ~/~/  Set Transmit Interval (TDC) = 30 seconds
856 856  * Example 2: Downlink Payload: 0100003C  ~/~/  Set Transmit Interval (TDC) = 60 seconds
857 857  
858 -
859 -
860 860  === 3.3.2 Get Device Status ===
861 861  
862 -Send a LoRaWAN downlink to ask the device to send its status.
926 +Send a LoRaWAN downlink to ask device send Alarm settings.
863 863  
864 864  (% style="color:blue" %)**Downlink Payload:  **(%%)0x26 01
865 865  
... ... @@ -868,6 +868,7 @@
868 868  
869 869  === 3.3.3 Set Interrupt Mode ===
870 870  
935 +
871 871  Feature, Set Interrupt mode for GPIO_EXIT.
872 872  
873 873  (% style="color:blue" %)**AT Command: AT+INTMOD1，AT+INTMOD2，AT+INTMOD3**
... ... @@ -904,8 +904,6 @@
904 904  * Example 3: Downlink Payload: 06000102  **~-~-->**  AT+INTMOD2=2
905 905  * Example 4: Downlink Payload: 06000201  **~-~-->**  AT+INTMOD3=1
906 906  
907 -
908 -
909 909  === 3.3.4 Set Power Output Duration ===
910 910  
911 911  Control the output duration 5V . Before each sampling, device will
... ... @@ -922,6 +922,7 @@
922 922  |=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
923 923  |(% style="width:154px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:157px" %)(((
924 924  500(default)
988 +
925 925  OK
926 926  )))
927 927  |(% style="width:154px" %)AT+5VT=1000|(% style="width:196px" %)(((
... ... @@ -934,11 +934,9 @@
934 934  
935 935  The first and second bytes are the time to turn on.
936 936  
937 -* Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
938 -* Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
1001 +* Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
1002 +* Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
939 939  
940 -
941 -
942 942  === 3.3.5 Set Weighing parameters ===
943 943  
944 944  Feature: Working mode 5 is effective, weight initialization and weight factor setting of HX711.
... ... @@ -953,6 +953,7 @@
953 953  
954 954  (% style="color:blue" %)**Downlink Command: 0x08**
955 955  
1018 +
956 956  Format: Command Code (0x08) followed by 2 bytes or 4 bytes.
957 957  
958 958  Use AT+WEIGRE when the first byte is 1, only 1 byte. When it is 2, use AT+WEIGAP, there are 3 bytes.
... ... @@ -963,8 +963,6 @@
963 963  * Example 2: Downlink Payload: 08020FA3  **~-~-->**  AT+WEIGAP=400.3
964 964  * Example 3: Downlink Payload: 08020FA0  **~-~-->**  AT+WEIGAP=400.0
965 965  
966 -
967 -
968 968  === 3.3.6 Set Digital pulse count value ===
969 969  
970 970  Feature: Set the pulse count value.
... ... @@ -980,6 +980,7 @@
980 980  
981 981  (% style="color:blue" %)**Downlink Command: 0x09**
982 982  
1044 +
983 983  Format: Command Code (0x09) followed by 5 bytes.
984 984  
985 985  The first byte is to select which count value to initialize, and the next four bytes are the count value to be initialized.
... ... @@ -987,8 +987,6 @@
987 987  * Example 1: Downlink Payload: 090100000000  **~-~-->**  AT+SETCNT=1,0
988 988  * Example 2: Downlink Payload: 0902000003E8  **~-~-->**  AT+SETCNT=2,1000
989 989  
990 -
991 -
992 992  === 3.3.7 Set Workmode ===
993 993  
994 994  Feature: Switch working mode.
... ... @@ -1002,18 +1002,18 @@
1002 1002  )))
1003 1003  |(% style="width:154px" %)AT+MOD=4|(% style="width:196px" %)Set the working mode to 3DS18B20s.|(% style="width:157px" %)(((
1004 1004  OK
1065 +
1005 1005  Attention:Take effect after ATZ
1006 1006  )))
1007 1007  
1008 1008  (% style="color:blue" %)**Downlink Command: 0x0A**
1009 1009  
1071 +
1010 1010  Format: Command Code (0x0A) followed by 1 bytes.
1011 1011  
1012 1012  * Example 1: Downlink Payload: 0A01  **~-~-->**  AT+MOD=1
1013 1013  * Example 2: Downlink Payload: 0A04  **~-~-->**  AT+MOD=4
1014 1014  
1015 -
1016 -
1017 1017  = 4. Battery & Power Consumption =
1018 1018  
1019 1019  
... ... @@ -1087,5 +1087,4 @@
1087 1087  
1088 1088  
1089 1089  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1090 -
1091 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.cc>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.cc]]
1150 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
image-20230515135611-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -948.0 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0