Last modified by Bei Jinggeng on 2025/01/10 15:51
<
From version < 43.4 >
edited by Xiaoling
on 2023/05/16 13:41
To version < 34.1 >
edited by Saxer Lin
on 2023/05/13 11:12
>
Change comment: Uploaded new attachment "image-20230513111231-8.png", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -SN50v3-LB LoRaWAN Sensor Node User Manual
1 +SN50v3-LB User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Saxer
Content
... ... @@ -1,5 +1,4 @@
1 -(% style="text-align:center" %)
2 -[[image:image-20230515135611-1.jpeg||height="589" width="589"]]
1 +[[image:image-20230511201248-1.png||height="403" width="489"]]
3 3  
4 4  
5 5  
... ... @@ -16,15 +16,18 @@
16 16  
17 17  == 1.1 What is SN50v3-LB LoRaWAN Generic Node ==
18 18  
19 -
20 20  (% style="color:blue" %)**SN50V3-LB **(%%)LoRaWAN Sensor Node is a Long Range LoRa Sensor Node. It is designed for outdoor use and powered by (% style="color:blue" %)** 8500mA Li/SOCl2 battery**(%%) for long term use.SN50V3-LB is designed to facilitate developers to quickly deploy industrial level LoRa and IoT solutions. It help users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to program, create and connect your things everywhere.
21 21  
20 +
22 22  (% style="color:blue" %)**SN50V3-LB wireless part**(%%) is based on SX1262 allows the user to send data and reach extremely long ranges at low data-rates.It provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, and so on.
23 23  
23 +
24 24  (% style="color:blue" %)**SN50V3-LB **(%%)has a powerful 48Mhz ARM microcontroller with 256KB flash and 64KB RAM. It has multiplex I/O pins to connect to different sensors.
25 25  
26 +
26 26  (% style="color:blue" %)**SN50V3-LB**(%%) has a built-in BLE module, user can configure the sensor remotely via Mobile Phone. It also support OTA upgrade via private LoRa protocol for easy maintaining.
27 27  
29 +
28 28  SN50V3-LB is the 3^^rd^^ generation of LSN50 series generic sensor node from Dragino. It is an (% style="color:blue" %)**open source project**(%%) and has a mature LoRaWAN stack and application software. User can use the pre-load software for their IoT projects or easily customize the software for different requirements.
29 29  
30 30  
... ... @@ -42,7 +42,6 @@
42 42  
43 43  == 1.3 Specification ==
44 44  
45 -
46 46  (% style="color:#037691" %)**Common DC Characteristics:**
47 47  
48 48  * Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
... ... @@ -79,7 +79,6 @@
79 79  
80 80  == 1.4 Sleep mode and working mode ==
81 81  
82 -
83 83  (% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
84 84  
85 85  (% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
... ... @@ -122,7 +122,7 @@
122 122  == 1.7 Pin Definitions ==
123 123  
124 124  
125 -[[image:image-20230513102034-2.png]]
125 +[[image:image-20230511203450-2.png||height="443" width="785"]]
126 126  
127 127  
128 128  == 1.8 Mechanical ==
... ... @@ -137,7 +137,6 @@
137 137  
138 138  == Hole Option ==
139 139  
140 -
141 141  SN50v3-LB has different hole size options for different size sensor cable. The options provided are M12, M16 and M20. The definition is as below:
142 142  
143 143  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220627104757-1.png?rev=1.1||alt="image-20220627104757-1.png"]]
... ... @@ -293,32 +293,21 @@
293 293  
294 294  In this mode, uplink payload includes in total 11 bytes. Uplink packets use FPORT=2.
295 295  
296 -(% style="width:1110px" %)
297 -|**Size(bytes)**|**2**|(% style="width:191px" %)**2**|(% style="width:78px" %)**2**|(% style="width:216px" %)**1**|(% style="width:308px" %)**2**|(% style="width:154px" %)**2**
298 -|**Value**|Bat|(% style="width:191px" %)(((
295 +|**Size(bytes)**|**2**|**2**|**2**|(% style="width:216px" %)**1**|(% style="width:342px" %)**2**|(% style="width:171px" %)**2**
296 +|**Value**|Bat|(((
299 299  Temperature(DS18B20)
300 300  
301 301  (PC13)
302 -)))|(% style="width:78px" %)(((
300 +)))|(((
303 303  ADC
304 304  
305 305  (PA4)
306 306  )))|(% style="width:216px" %)(((
307 -Digital in(PB15) &
305 +Digital in & Digital Interrupt
308 308  
309 -Digital Interrupt(PA8)
310 -
311 311  
312 -)))|(% style="width:308px" %)(((
313 -Temperature
308 +)))|(% style="width:342px" %)Temperature（SHT20 or SHT31 or BH1750 Illumination Sensor|(% style="width:171px" %)Humidity（SHT20 or SHT31)
314 314  
315 -(SHT20 or SHT31 or BH1750 Illumination Sensor)
316 -)))|(% style="width:154px" %)(((
317 -Humidity
318 -
319 -(SHT20 or SHT31)
320 -)))
321 -
322 322  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220627150949-6.png?rev=1.1||alt="image-20220627150949-6.png"]]
323 323  
324 324  
... ... @@ -326,26 +326,15 @@
326 326  
327 327  This mode is target to measure the distance. The payload of this mode is totally 11 bytes. The 8^^th^^ and 9^^th^^ bytes is for the distance.
328 328  
329 -(% style="width:1011px" %)
330 -|**Size(bytes)**|**2**|(% style="width:196px" %)**2**|(% style="width:87px" %)**2**|(% style="width:189px" %)**1**|(% style="width:208px" %)**2**|(% style="width:117px" %)**2**
331 -|**Value**|BAT|(% style="width:196px" %)(((
317 +|**Size(bytes)**|**2**|**2**|**2**|**1**|**2**|**2**
318 +|**Value**|BAT|(((
332 332  Temperature(DS18B20)
333 -
334 -(PC13)
335 -)))|(% style="width:87px" %)(((
336 -ADC
337 -
338 -(PA4)
339 -)))|(% style="width:189px" %)(((
340 -Digital in(PB15) &
341 -
342 -Digital Interrupt(PA8)
343 -)))|(% style="width:208px" %)(((
320 +)))|ADC|Digital in & Digital Interrupt|(((
344 344  Distance measure by:
345 345  1) LIDAR-Lite V3HP
346 346  Or
347 347  2) Ultrasonic Sensor
348 -)))|(% style="width:117px" %)Reserved
325 +)))|Reserved
349 349  
350 350  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656324539647-568.png?rev=1.1||alt="1656324539647-568.png"]]
351 351  
... ... @@ -355,84 +355,61 @@
355 355  
356 356  **Connection to Ultrasonic Sensor:**
357 357  
358 -Need to remove R1 and R2 resistors to get low power,otherwise there will be 240uA standby current.
359 -
360 360  [[image:image-20230512173903-6.png||height="596" width="715"]]
361 361  
362 362  For the connection to TF-Mini or TF-Luna , MOD2 payload is as below:
363 363  
364 -(% style="width:1113px" %)
365 -|**Size(bytes)**|**2**|(% style="width:183px" %)**2**|(% style="width:173px" %)**1**|(% style="width:84px" %)**2**|(% style="width:323px" %)**2**|(% style="width:188px" %)**2**
366 -|**Value**|BAT|(% style="width:183px" %)(((
339 +|**Size(bytes)**|**2**|**2**|**1**|**2**|**2**|**2**
340 +|**Value**|BAT|(((
367 367  Temperature(DS18B20)
368 -
369 -(PC13)
370 -)))|(% style="width:173px" %)(((
371 -Digital in(PB15) &
372 -
373 -Digital Interrupt(PA8)
374 -)))|(% style="width:84px" %)(((
375 -ADC
376 -
377 -(PA4)
378 -)))|(% style="width:323px" %)(((
342 +)))|Digital in & Digital Interrupt|ADC|(((
379 379  Distance measure by:1)TF-Mini plus LiDAR
380 380  Or 
381 381  2) TF-Luna LiDAR
382 -)))|(% style="width:188px" %)Distance signal  strength
346 +)))|Distance signal  strength
383 383  
384 384  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656376779088-686.png?rev=1.1||alt="1656376779088-686.png"]]
385 385  
386 386  **Connection to [[TF-Mini plus>>url:http://en.benewake.com/product/detail/5c345cd0e5b3a844c472329b.html]] LiDAR(UART version):**
387 387  
388 -Need to remove R3 and R4 resistors to get low power,otherwise there will be 400uA standby current.
352 +Need to remove R3 and R4 resistors to get low power.
389 389  
390 390  [[image:image-20230512180609-7.png||height="555" width="802"]]
391 391  
392 392  **Connection to [[TF-Luna>>url:http://en.benewake.com/product/detail/5e1c1fd04d839408076b6255.html]] LiDAR (UART version):**
393 393  
394 -Need to remove R3 and R4 resistors to get low power,otherwise there will be 400uA standby current.
358 +Need to remove R3 and R4 resistors to get low power.
395 395  
396 -[[image:image-20230513105207-4.png||height="469" width="802"]]
360 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656376865561-355.png?rev=1.1||alt="1656376865561-355.png"]]
397 397  
362 +Please use firmware version > 1.6.5 when use MOD=2, in this firmware version, user can use LSn50 v1 to power the ultrasonic sensor directly and with low power consumption.
398 398  
364 +
399 399  ==== 2.3.2.3  MOD~=3 (3 ADC + I2C) ====
400 400  
401 401  This mode has total 12 bytes. Include 3 x ADC + 1x I2C
402 402  
403 -(% style="width:1031px" %)
404 404  |=(((
405 405  **Size(bytes)**
406 -)))|=(% style="width: 68px;" %)**2**|=(% style="width: 75px;" %)**2**|=**2**|=**1**|=(% style="width: 304px;" %)2|=(% style="width: 163px;" %)2|=(% style="width: 53px;" %)1
371 +)))|=(% style="width: 68px;" %)**2**|=(% style="width: 75px;" %)**2**|=**2**|=**1**|=(% style="width: 318px;" %)2|=(% style="width: 172px;" %)2|=1
407 407  |**Value**|(% style="width:68px" %)(((
408 -ADC1
373 +ADC
409 409  
410 -(PA4)
375 +(PA0)
411 411  )))|(% style="width:75px" %)(((
412 412  ADC2
413 413  
414 -(PA5)
415 -)))|(((
416 -ADC3
379 +(PA1)
380 +)))|ADC3 (PA4)|(((
381 +Digital in(PA12)&Digital Interrupt1(PB14)
382 +)))|(% style="width:318px" %)Temperature（SHT20 or SHT31 or BH1750 Illumination Sensor）|(% style="width:172px" %)Humidity（SHT20 or SHT31)|Bat
417 417  
418 -(PA8)
419 -)))|(((
420 -Digital Interrupt(PB15)
421 -)))|(% style="width:304px" %)(((
422 -Temperature
384 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656377431497-975.png?rev=1.1||alt="1656377431497-975.png"]]
423 423  
424 -(SHT20 or SHT31 or BH1750 Illumination Sensor)
425 -)))|(% style="width:163px" %)(((
426 -Humidity
427 427  
428 -(SHT20 or SHT31)
429 -)))|(% style="width:53px" %)Bat
430 -
431 -[[image:image-20230513110214-6.png]]
432 -
433 -
434 434  ==== 2.3.2.4 MOD~=4 (3 x DS18B20) ====
435 435  
389 +[[image:image-20230512170701-3.png||height="565" width="743"]]
436 436  
437 437  This mode has total 11 bytes. As shown below:
438 438  
... ... @@ -446,9 +446,9 @@
446 446  
447 447  (PA4)
448 448  )))|(% style="width:210px" %)(((
449 -Digital in(PB15) &
403 +Digital in & Digital Interrupt
450 450  
451 -Digital Interrupt(PA8) 
405 +(PB15)  &  (PA8) 
452 452  )))|(% style="width:191px" %)Temperature2(DS18B20)
453 453  (PB9)|(% style="width:183px" %)Temperature3(DS18B20)
454 454  (PB8)
... ... @@ -455,9 +455,7 @@
455 455  
456 456  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656377606181-607.png?rev=1.1||alt="1656377606181-607.png"]]
457 457  
458 -[[image:image-20230513134006-1.png||height="559" width="736"]]
459 459  
460 -
461 461  ==== 2.3.2.5  MOD~=5(Weight Measurement by HX711) ====
462 462  
463 463  [[image:image-20230512164658-2.png||height="532" width="729"]]
... ... @@ -478,25 +478,25 @@
478 478  
479 479  Check the response of this command and adjust the value to match the real value for thing.
480 480  
481 -(% style="width:767px" %)
433 +(% style="width:982px" %)
482 482  |=(((
483 483  **Size(bytes)**
484 -)))|=**2**|=(% style="width: 193px;" %)**2**|=(% style="width: 85px;" %)**2**|=(% style="width: 186px;" %)**1**|=(% style="width: 100px;" %)**4**
485 -|**Value**|BAT|(% style="width:193px" %)(((
486 -Temperature(DS18B20)
436 +)))|=**2**|=(% style="width: 282px;" %)**2**|=(% style="width: 119px;" %)**2**|=(% style="width: 279px;" %)**1**|=(% style="width: 106px;" %)**4**
437 +|**Value**|[[Bat>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.1BatteryInfo]]|(% style="width:282px" %)(((
438 +[[Temperature(DS18B20)>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.2Temperature28DS18B2029]]
487 487  
488 488  (PC13)
489 489  
490 490  
491 -)))|(% style="width:85px" %)(((
492 -ADC
443 +)))|(% style="width:119px" %)(((
444 +[[ADC>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.4AnalogueDigitalConverter28ADC29]]
493 493  
494 494  (PA4)
495 -)))|(% style="width:186px" %)(((
496 -Digital in(PB15) &
447 +)))|(% style="width:279px" %)(((
448 +[[Digital Input and Digitak Interrupt>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.3DigitalInput]]
497 497  
498 -Digital Interrupt(PA8)
499 -)))|(% style="width:100px" %)Weight
450 +(PB15)  &  (PA8)
451 +)))|(% style="width:106px" %)Weight
500 500  
501 501  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220820120036-2.png?width=1003&height=469&rev=1.1||alt="image-20220820120036-2.png" height="469" width="1003"]]
502 502  
... ... @@ -509,127 +509,81 @@
509 509  
510 510  [[image:image-20230512181814-9.png||height="543" width="697"]]
511 511  
512 -**Note:** LoRaWAN wireless transmission will infect the PIR sensor. Which cause the counting value increase +1 for every uplink. User can change PIR sensor or put sensor away of the SN50_v3 to avoid this happen.
464 +**Note:** LoRaWAN wireless transmission will infect the PIR sensor. Which cause the counting value increase +1 for every uplink. User can change PIR sensor or put sensor away of the LSN50 to avoid this happen.
513 513  
514 -(% style="width:961px" %)
515 -|=**Size(bytes)**|=**2**|=(% style="width: 256px;" %)**2**|=(% style="width: 108px;" %)**2**|=(% style="width: 126px;" %)**1**|=(% style="width: 145px;" %)**4**
516 -|**Value**|BAT|(% style="width:256px" %)(((
517 -Temperature(DS18B20)
466 +|=**Size(bytes)**|=**2**|=**2**|=**2**|=**1**|=**4**
467 +|**Value**|[[BAT>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.1BatteryInfo]]|(((
468 +[[Temperature(DS18B20)>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.2Temperature28DS18B2029]]
469 +)))|[[ADC>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.4AnalogueDigitalConverter28ADC29]]|[[Digital in>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.3DigitalInput]]|Count
518 518  
519 -(PC13)
520 -)))|(% style="width:108px" %)(((
521 -ADC
522 -
523 -(PA4)
524 -)))|(% style="width:126px" %)(((
525 -Digital in
526 -
527 -(PB15)
528 -)))|(% style="width:145px" %)(((
529 -Count
530 -
531 -(PA8)
532 -)))
533 -
534 534  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656378441509-171.png?rev=1.1||alt="1656378441509-171.png"]]
535 535  
536 536  
537 537  ==== 2.3.2.7  MOD~=7 (Three interrupt contact modes) ====
538 538  
539 -(% style="width:1108px" %)
476 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220820140109-3.png?rev=1.1||alt="image-20220820140109-3.png"]]
477 +
540 540  |=(((
541 541  **Size(bytes)**
542 -)))|=**2**|=(% style="width: 188px;" %)**2**|=(% style="width: 83px;" %)**2**|=(% style="width: 184px;" %)**1**|=(% style="width: 186px;" %)**1**|=(% style="width: 197px;" %)1|=(% style="width: 100px;" %)2
543 -|**Value**|BAT|(% style="width:188px" %)(((
544 -Temperature(DS18B20)
480 +)))|=**2**|=**2**|=**2**|=**1**|=**1**|=1|=2
481 +|**Value**|BAT|Temperature(DS18B20)|ADC|(((
482 +Digital in(PA12)&Digital Interrupt1(PB14)
483 +)))|Digital Interrupt2(PB15)|Digital Interrupt3(PA4)|Reserved
545 545  
546 -(PC13)
547 -)))|(% style="width:83px" %)(((
548 -ADC
549 -
550 -(PA5)
551 -)))|(% style="width:184px" %)(((
552 -Digital Interrupt1(PA8)
553 -)))|(% style="width:186px" %)Digital Interrupt2(PA4)|(% style="width:197px" %)Digital Interrupt3(PB15)|(% style="width:100px" %)Reserved
554 -
555 -[[image:image-20230513111203-7.png||height="324" width="975"]]
556 -
557 557  ==== 2.3.2.8  MOD~=8 （3ADC+1DS18B20） ====
558 558  
559 -(% style="width:922px" %)
560 560  |=(((
561 561  **Size(bytes)**
562 -)))|=**2**|=(% style="width: 207px;" %)**2**|=(% style="width: 94px;" %)**2**|=(% style="width: 198px;" %)**1**|=(% style="width: 84px;" %)**2**|=(% style="width: 82px;" %)2
563 -|**Value**|BAT|(% style="width:207px" %)(((
564 -Temperature(DS18B20)
565 -
566 -(PC13)
567 -)))|(% style="width:94px" %)(((
568 -ADC1
569 -
570 -(PA4)
571 -)))|(% style="width:198px" %)(((
572 -Digital Interrupt(PB15)
573 -)))|(% style="width:84px" %)(((
574 -ADC2
575 -
576 -(PA5)
577 -)))|(% style="width:82px" %)(((
578 -ADC3
579 -
580 -(PA8)
489 +)))|=**2**|=**2**|=**2**|=**1**|=**2**|=2
490 +|**Value**|BAT|Temperature(DS18B20)|(((
491 +ADC1(PA0)
492 +)))|(((
493 +Digital in
494 +& Digital Interrupt(PB14)
495 +)))|(((
496 +ADC2(PA1)
497 +)))|(((
498 +ADC3(PA4)
581 581  )))
582 582  
583 -[[image:image-20230513111231-8.png||height="335" width="900"]]
501 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220823164903-2.png?rev=1.1||alt="image-20220823164903-2.png"]]
584 584  
585 585  
586 586  ==== 2.3.2.9  MOD~=9 (3DS18B20+ two Interrupt count mode) ====
587 587  
588 -(% style="width:1010px" %)
589 589  |=(((
590 590  **Size(bytes)**
591 -)))|=**2**|=**2**|=**2**|=**1**|=(% style="width: 193px;" %)**2**|=(% style="width: 78px;" %)4|=(% style="width: 78px;" %)4
508 +)))|=**2**|=**2**|=**2**|=**1**|=**2**|=4|=4
592 592  |**Value**|BAT|(((
593 -Temperature1(DS18B20)
594 -
595 -(PC13)
510 +Temperature1(PB3)
596 596  )))|(((
597 -Temperature2(DS18B20)
598 -
599 -(PB9)
512 +Temperature2(PA9)
600 600  )))|(((
601 -Digital Interrupt
602 -
603 -(PB15)
604 -)))|(% style="width:193px" %)(((
605 -Temperature3(DS18B20)
606 -
607 -(PB8)
608 -)))|(% style="width:78px" %)(((
609 -Count1
610 -
611 -(PA8)
612 -)))|(% style="width:78px" %)(((
613 -Count2
614 -
615 -(PA4)
514 +Digital in
515 +& Digital Interrupt(PA4)
516 +)))|(((
517 +Temperature3(PA10)
518 +)))|(((
519 +Count1(PB14)
520 +)))|(((
521 +Count2(PB15)
616 616  )))
617 617  
618 -[[image:image-20230513111255-9.png||height="341" width="899"]]
524 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220823165322-3.png?rev=1.1||alt="image-20220823165322-3.png"]]
619 619  
620 620  **The newly added AT command is issued correspondingly:**
621 621  
622 -**~ AT+INTMOD1** ** PA8**  pin：  Corresponding downlink:  **06 00 00 xx**
528 +**~ AT+INTMOD1** ** PB14**  pin：  Corresponding downlink:  **06 00 00 xx**
623 623  
624 -**~ AT+INTMOD2**  **PA4**  pin：  Corresponding downlink:**  06 00 01 xx**
530 +**~ AT+INTMOD2**  **PB15** pin：  Corresponding downlink:**  06 00 01 xx**
625 625  
626 -**~ AT+INTMOD3**  **PB15**  pin：  Corresponding downlink:  ** 06 00 02 xx**
532 +**~ AT+INTMOD3**  **PA4**  pin：  Corresponding downlink:  ** 06 00 02 xx**
627 627  
628 628  **AT+SETCNT=aa,bb** 
629 629  
630 -When AA is 1, set the count of PA8 pin to BB Corresponding downlink：09 01 bb bb bb bb
536 +When AA is 1, set the count of PB14 pin to BB Corresponding downlink：09 01 bb bb bb bb
631 631  
632 -When AA is 2, set the count of PA4 pin to BB Corresponding downlink：09 02 bb bb bb bb
538 +When AA is 2, set the count of PB15 pin to BB Corresponding downlink：09 02 bb bb bb bb
633 633  
634 634  
635 635  
... ... @@ -655,7 +655,7 @@
655 655  
656 656  ==== 2.3.3.2  Temperature (DS18B20) ====
657 657  
658 -If there is a DS18B20 connected to PC13 pin. The temperature will be uploaded in the payload.
564 +If there is a DS18B20 connected to PB3 pin. The temperature will be uploaded in the payload.
659 659  
660 660  More DS18B20 can check the [[3 DS18B20 mode>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#2.3.4MOD3D4283xDS18B2029]]
661 661  
... ... @@ -681,31 +681,26 @@
681 681  
682 682  (% class="wikigeneratedid" id="H2.3.3.4A0AnalogueDigitalConverter28ADC29" %)
683 683  (((
684 -When the digital interrupt pin is set to AT+INTMODx=0, this pin is used as a digital input pin.
685 -
686 -**Note:**The maximum voltage input supports 3.6V.
687 -
688 -
590 +Note:The maximum voltage input supports 3.6V.
689 689  )))
690 690  
593 +(% class="wikigeneratedid" %)
691 691  ==== 2.3.3.4  Analogue Digital Converter (ADC) ====
692 692  
693 -The measuring range of the ADC is only about 0V to 1.1V The voltage resolution is about 0.24mv.
596 +The measuring range of the node is only about 0.1V to 1.1V The voltage resolution is about 0.24mv.
694 694  
695 -When the measured output voltage of the sensor is not within the range of 0V and 1.1V, the output voltage terminal of the sensor shall be divided The example in the following figure is to reduce the output voltage of the sensor by three times If it is necessary to reduce more times, calculate according to the formula in the figure and connect the corresponding resistance in series.
598 +When the measured output voltage of the sensor is not within the range of 0.1V and 1.1V, the output voltage terminal of the sensor shall be divided The example in the following figure is to reduce the output voltage of the sensor by three times If it is necessary to reduce more times, calculate according to the formula in the figure and connect the corresponding resistance in series.
696 696  
697 697  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220628150112-1.png?width=285&height=241&rev=1.1||alt="image-20220628150112-1.png" height="241" width="285"]]
698 698  
699 -**Note:**If the ADC type sensor needs to be powered by SN50_v3, it is recommended to use +5V to control its switch.Only sensors with low power consumption can be powered with VDD.
700 700  
701 -
702 702  ==== 2.3.3.5 Digital Interrupt ====
703 703  
704 -Digital Interrupt refers to pin PA8, and there are different trigger methods. When there is a trigger, the SN50v3 will send a packet to the server.
605 +Digital Interrupt refers to pin PB14, and there are different trigger methods. When there is a trigger, the SN50v3 will send a packet to the server.
705 705  
706 706  **~ Interrupt connection method:**
707 707  
708 -[[image:image-20230513105351-5.png||height="147" width="485"]]
609 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379178634-321.png?rev=1.1||alt="1656379178634-321.png"]]
709 709  
710 710  **Example to use with door sensor :**
711 711  
... ... @@ -713,24 +713,24 @@
713 713  
714 714  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379210849-860.png?rev=1.1||alt="1656379210849-860.png"]]
715 715  
716 -When the two pieces are close to each other, the 2 wire output will be short or open (depending on the type), while if the two pieces are away from each other, the 2 wire output will be the opposite status. So we can use SN50_v3 interrupt interface to detect the status for the door or window.
617 +When the two pieces are close to each other, the 2 wire output will be short or open (depending on the type), while if the two pieces are away from each other, the 2 wire output will be the opposite status. So we can use LSN50 interrupt interface to detect the status for the door or window.
717 717  
718 718  **~ Below is the installation example:**
719 719  
720 -Fix one piece of the magnetic sensor to the door and connect the two pins to SN50_v3 as follows:
621 +Fix one piece of the magnetic sensor to the door and connect the two pins to LSN50 as follows:
721 721  
722 722  * (((
723 -One pin to SN50_v3's PA8 pin
624 +One pin to LSN50's PB14 pin
724 724  )))
725 725  * (((
726 -The other pin to SN50_v3's VDD pin
627 +The other pin to LSN50's VCC pin
727 727  )))
728 728  
729 -Install the other piece to the door. Find a place where the two pieces will be close to each other when the door is closed. For this particular magnetic sensor, when the door is closed, the output will be short, and PA8 will be at the VCC voltage.
630 +Install the other piece to the door. Find a place where the two pieces will be close to each other when the door is closed. For this particular magnetic sensor, when the door is closed, the output will be short, and PB14 will be at the VCC voltage.
730 730  
731 731  Door sensors have two types: ** NC (Normal close)** and **NO (normal open)**. The connection for both type sensors are the same. But the decoding for payload are reverse, user need to modify this in the IoT Server decoder.
732 732  
733 -When door sensor is shorted, there will extra power consumption in the circuit, the extra current is 3v3/R14 = 3v3/1Mohm = 3uA which can be ignored.
634 +When door sensor is shorted, there will extra power consumption in the circuit, the extra current is 3v3/R14 = 3v2/1Mohm = 0.3uA which can be ignored.
734 734  
735 735  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379283019-229.png?rev=1.1||alt="1656379283019-229.png"]]
736 736  
... ... @@ -740,7 +740,7 @@
740 740  
741 741  The command is:
742 742  
743 -**AT+INTMOD1=1       **~/~/(more info about INMOD please refer** **[[**AT Command Manual**>>url:http://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/&file=DRAGINO_LSN50_AT_Commands_v1.5.1.pdf]]**. **)
644 +**AT+INTMOD=1       **~/~/(more info about INMOD please refer** **[[**AT Command Manual**>>url:http://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/&file=DRAGINO_LSN50_AT_Commands_v1.5.1.pdf]]**. **)
744 744  
745 745  Below shows some screen captures in TTN V3:
746 746  
... ... @@ -755,15 +755,14 @@
755 755  
756 756  The SDA and SCK are I2C interface lines. You can use these to connect to an I2C device and get the sensor data.
757 757  
758 -We have made an example to show how to use the I2C interface to connect to the SHT20/ SHT31 Temperature and Humidity Sensor.
659 +We have made an example to show how to use the I2C interface to connect to the SHT20 Temperature and Humidity Sensor.
759 759  
760 -Notice: Different I2C sensors have different I2C commands set and initiate process, if user want to use other I2C sensors, User need to re-write the source code to support those sensors. SHT20/ SHT31 code in SN50_v3 will be a good reference.
661 +Notice: Different I2C sensors have different I2C commands set and initiate process, if user want to use other I2C sensors, User need to re-write the source code to support those sensors. SHT20 code in SN50_v3 will be a good reference.
761 761  
762 762  Below is the connection to SHT20/ SHT31. The connection is as below:
763 763  
665 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220902163605-2.png?rev=1.1||alt="image-20220902163605-2.png"]]
764 764  
765 -[[image:image-20230513103633-3.png||height="448" width="716"]]
766 -
767 767  The device will be able to get the I2C sensor data now and upload to IoT Server.
768 768  
769 769  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379664142-345.png?rev=1.1||alt="1656379664142-345.png"]]
... ... @@ -788,15 +788,12 @@
788 788  
789 789  This Fundamental Principles of this sensor can be found at this link: [[https:~~/~~/wiki.dfrobot.com/Weather_-_proof_Ultrasonic_Sensor_with_Separate_Probe_SKU~~_~~__SEN0208>>url:https://wiki.dfrobot.com/Weather_-_proof_Ultrasonic_Sensor_with_Separate_Probe_SKU___SEN0208]]
790 790  
791 -The SN50_v3 detects the pulse width of the sensor and converts it to mm output. The accuracy will be within 1 centimeter. The usable range (the distance between the ultrasonic probe and the measured object) is between 24cm and 600cm.
691 +The LSN50 detects the pulse width of the sensor and converts it to mm output. The accuracy will be within 1 centimeter. The usable range (the distance between the ultrasonic probe and the measured object) is between 24cm and 600cm.
792 792  
793 -The working principle of this sensor is similar to the **HC-SR04** ultrasonic sensor.
794 -
795 795  The picture below shows the connection:
796 796  
797 -[[image:image-20230512173903-6.png||height="596" width="715"]]
798 798  
799 -Connect to the SN50_v3 and run **AT+MOD=2** to switch to ultrasonic mode (ULT).
696 +Connect to the LSN50 and run **AT+MOD=2** to switch to ultrasonic mode (ULT).
800 800  
801 801  The ultrasonic sensor uses the 8^^th^^ and 9^^th^^ byte for the measurement value.
802 802  
... ... @@ -804,8 +804,20 @@
804 804  
805 805  Distance:  Read: 0C2D(Hex) = 3117(D)  Value:  3117 mm=311.7 cm
806 806  
704 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656384895430-327.png?rev=1.1||alt="1656384895430-327.png"]]
807 807  
706 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656384913616-455.png?rev=1.1||alt="1656384913616-455.png"]]
808 808  
708 +You can see the serial output in ULT mode as below:
709 +
710 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656384939855-223.png?rev=1.1||alt="1656384939855-223.png"]]
711 +
712 +**In TTN V3 server:**
713 +
714 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656384961830-307.png?rev=1.1||alt="1656384961830-307.png"]]
715 +
716 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656384973646-598.png?rev=1.1||alt="1656384973646-598.png"]]
717 +
809 809  ==== 2.3.3.9  Battery Output - BAT pin ====
810 810  
811 811  The BAT pin of SN50v3 is connected to the Battery directly. If users want to use BAT pin to power an external sensor. User need to make sure the external sensor is of low power consumption. Because the BAT pin is always open. If the external sensor is of high power consumption. the battery of SN50v3-LB will run out very soon.
... ... @@ -829,9 +829,9 @@
829 829  
830 830  MOD=1 support this sensor. The sensor value is in the 8^^th^^ and 9^^th^^ bytes.
831 831  
832 -[[image:image-20230512172447-4.png||height="416" width="712"]]
741 +[[image:image-20230512172447-4.png||height="593" width="1015"]]
833 833  
834 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220628110012-12.png?rev=1.1||alt="image-20220628110012-12.png" height="361" width="953"]]
743 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220628110012-12.png?rev=1.1||alt="image-20220628110012-12.png"]]
835 835  
836 836  
837 837  ==== 2.3.3.12  Working MOD ====
... ... @@ -848,12 +848,7 @@
848 848  * 3: MOD4
849 849  * 4: MOD5
850 850  * 5: MOD6
851 -* 6: MOD7
852 -* 7: MOD8
853 -* 8: MOD9
854 854  
855 -== ==
856 -
857 857  == 2.4 Payload Decoder file ==
858 858  
859 859  
... ... @@ -861,7 +861,7 @@
861 861  
862 862  In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from:
863 863  
864 -[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/SN50_v3-LB>>https://github.com/dragino/dragino-end-node-decoder/tree/main/SN50_v3-LB]]
768 +[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/LSN50v2-S31%26S31B >>https://github.com/dragino/dragino-end-node-decoder/tree/main/LSN50v2-S31%26S31B]]
865 865  
866 866  
867 867  
... ... @@ -905,6 +905,7 @@
905 905  
906 906  === 3.3.1 Set Transmit Interval Time ===
907 907  
812 +
908 908  Feature: Change LoRaWAN End Node Transmit Interval.
909 909  
910 910  (% style="color:blue" %)**AT Command: AT+TDC**
... ... @@ -930,11 +930,9 @@
930 930  * Example 1: Downlink Payload: 0100001E  ~/~/  Set Transmit Interval (TDC) = 30 seconds
931 931  * Example 2: Downlink Payload: 0100003C  ~/~/  Set Transmit Interval (TDC) = 60 seconds
932 932  
933 -=== ===
934 -
935 935  === 3.3.2 Get Device Status ===
936 936  
937 -Send a LoRaWAN downlink to ask the device to send its status.
840 +Send a LoRaWAN downlink to ask device send Alarm settings.
938 938  
939 939  (% style="color:blue" %)**Downlink Payload:  **(%%)0x26 01
940 940  
... ... @@ -941,20 +941,21 @@
941 941  Sensor will upload Device Status via FPORT=5. See payload section for detail.
942 942  
943 943  
944 -=== 3.3.3 Set Interrupt Mode ===
847 +=== 3.3.7 Set Interrupt Mode ===
945 945  
849 +
946 946  Feature, Set Interrupt mode for GPIO_EXIT.
947 947  
948 -(% style="color:blue" %)**AT Command: AT+INTMOD1，AT+INTMOD2，AT+INTMOD3**
852 +(% style="color:blue" %)**AT Command: AT+INTMOD**
949 949  
950 950  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
951 951  |=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
952 -|(% style="width:154px" %)AT+INTMOD1=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
856 +|(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
953 953  0
954 954  OK
955 955  the mode is 0 =Disable Interrupt
956 956  )))
957 -|(% style="width:154px" %)AT+INTMOD1=2|(% style="width:196px" %)(((
861 +|(% style="width:154px" %)AT+INTMOD=2|(% style="width:196px" %)(((
958 958  Set Transmit Interval
959 959  0. (Disable Interrupt),
960 960  ~1. (Trigger by rising and falling edge)
... ... @@ -961,13 +961,7 @@
961 961  2. (Trigger by falling edge)
962 962  3. (Trigger by rising edge)
963 963  )))|(% style="width:157px" %)OK
964 -|(% style="width:154px" %)AT+INTMOD2=3|(% style="width:196px" %)(((
965 -Set Transmit Interval
966 966  
967 -trigger by rising edge.
968 -)))|(% style="width:157px" %)OK
969 -|(% style="width:154px" %)AT+INTMOD3=0|(% style="width:196px" %)Disable Interrupt|(% style="width:157px" %)OK
970 -
971 971  (% style="color:blue" %)**Downlink Command: 0x06**
972 972  
973 973  Format: Command Code (0x06) followed by 3 bytes.
... ... @@ -974,123 +974,9 @@
974 974  
975 975  This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
976 976  
977 -* Example 1: Downlink Payload: 06000000  **~-~-->**  AT+INTMOD1=0
978 -* Example 2: Downlink Payload: 06000003  **~-~-->**  AT+INTMOD1=3
979 -* Example 3: Downlink Payload: 06000102  **~-~-->**  AT+INTMOD2=2
980 -* Example 4: Downlink Payload: 06000201  **~-~-->**  AT+INTMOD3=1
875 +* Example 1: Downlink Payload: 06000000  ~/~/  Turn off interrupt mode
876 +* Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
981 981  
982 -=== ===
983 -
984 -=== 3.3.4 Set Power Output Duration ===
985 -
986 -Control the output duration 5V . Before each sampling, device will
987 -
988 -~1. first enable the power output to external sensor,
989 -
990 -2. keep it on as per duration, read sensor value and construct uplink payload
991 -
992 -3. final, close the power output.
993 -
994 -(% style="color:blue" %)**AT Command: AT+5VT**
995 -
996 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
997 -|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
998 -|(% style="width:154px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:157px" %)(((
999 -500(default)
1000 -
1001 -OK
1002 -)))
1003 -|(% style="width:154px" %)AT+5VT=1000|(% style="width:196px" %)(((
1004 -Close after a delay of 1000 milliseconds.
1005 -)))|(% style="width:157px" %)OK
1006 -
1007 -(% style="color:blue" %)**Downlink Command: 0x07**
1008 -
1009 -Format: Command Code (0x07) followed by 2 bytes.
1010 -
1011 -The first and second bytes are the time to turn on.
1012 -
1013 -* Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
1014 -* Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
1015 -
1016 -=== ===
1017 -
1018 -=== 3.3.5 Set Weighing parameters ===
1019 -
1020 -Feature: Working mode 5 is effective, weight initialization and weight factor setting of HX711.
1021 -
1022 -(% style="color:blue" %)**AT Command: AT+WEIGRE,AT+WEIGAP**
1023 -
1024 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1025 -|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
1026 -|(% style="width:154px" %)AT+WEIGRE|(% style="width:196px" %)Weight is initialized to 0.|(% style="width:157px" %)OK
1027 -|(% style="width:154px" %)AT+WEIGAP=？|(% style="width:196px" %)400.0|(% style="width:157px" %)OK(default)
1028 -|(% style="width:154px" %)AT+WEIGAP=400.3|(% style="width:196px" %)Set the factor to 400.3.|(% style="width:157px" %)OK
1029 -
1030 -(% style="color:blue" %)**Downlink Command: 0x08**
1031 -
1032 -Format: Command Code (0x08) followed by 2 bytes or 4 bytes.
1033 -
1034 -Use AT+WEIGRE when the first byte is 1, only 1 byte. When it is 2, use AT+WEIGAP, there are 3 bytes.
1035 -
1036 -The second and third bytes are multiplied by 10 times to be the AT+WEIGAP value.
1037 -
1038 -* Example 1: Downlink Payload: 0801  **~-~-->**  AT+WEIGRE
1039 -* Example 2: Downlink Payload: 08020FA3  **~-~-->**  AT+WEIGAP=400.3
1040 -* Example 3: Downlink Payload: 08020FA0  **~-~-->**  AT+WEIGAP=400.0
1041 -
1042 -=== ===
1043 -
1044 -=== 3.3.6 Set Digital pulse count value ===
1045 -
1046 -Feature: Set the pulse count value.
1047 -
1048 -Count 1 is PA8 pin of mode 6 and mode 9. Count 2 is PA4 pin of mode 9.
1049 -
1050 -(% style="color:blue" %)**AT Command: AT+SETCNT**
1051 -
1052 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1053 -|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
1054 -|(% style="width:154px" %)AT+SETCNT=1,100|(% style="width:196px" %)Initialize the count value 1 to 100.|(% style="width:157px" %)OK
1055 -|(% style="width:154px" %)AT+SETCNT=2,0|(% style="width:196px" %)Initialize the count value 2 to 0.|(% style="width:157px" %)OK
1056 -
1057 -(% style="color:blue" %)**Downlink Command: 0x09**
1058 -
1059 -Format: Command Code (0x09) followed by 5 bytes.
1060 -
1061 -The first byte is to select which count value to initialize, and the next four bytes are the count value to be initialized.
1062 -
1063 -* Example 1: Downlink Payload: 090100000000  **~-~-->**  AT+SETCNT=1,0
1064 -* Example 2: Downlink Payload: 0902000003E8  **~-~-->**  AT+SETCNT=2,1000
1065 -
1066 -=== ===
1067 -
1068 -=== 3.3.7 Set Workmode ===
1069 -
1070 -Feature: Switch working mode.
1071 -
1072 -(% style="color:blue" %)**AT Command: AT+MOD**
1073 -
1074 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1075 -|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
1076 -|(% style="width:154px" %)AT+MOD=?|(% style="width:196px" %)Get the current working mode.|(% style="width:157px" %)(((
1077 -OK
1078 -)))
1079 -|(% style="width:154px" %)AT+MOD=4|(% style="width:196px" %)Set the working mode to 3DS18B20s.|(% style="width:157px" %)(((
1080 -OK
1081 -
1082 -Attention:Take effect after ATZ
1083 -)))
1084 -
1085 -(% style="color:blue" %)**Downlink Command: 0x0A**
1086 -
1087 -Format: Command Code (0x0A) followed by 1 bytes.
1088 -
1089 -* Example 1: Downlink Payload: 0A01  **~-~-->**  AT+MOD=1
1090 -* Example 2: Downlink Payload: 0A04  **~-~-->**  AT+MOD=4
1091 -
1092 -= =
1093 -
1094 1094  = 4. Battery & Power Consumption =
1095 1095  
1096 1096  
... ... @@ -1124,6 +1124,7 @@
1124 1124  * **[[Hardware Source Files>>https://github.com/dragino/Lora/tree/master/LSN50/v3.0]].**
1125 1125  * **[[Software Source Code & Compile instruction>>https://github.com/dragino/SN50v3]].**
1126 1126  
911 +
1127 1127  = 7. Order Info =
1128 1128  
1129 1129  
... ... @@ -1164,4 +1164,4 @@
1164 1164  
1165 1165  
1166 1166  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1167 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.cc>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.cc]]
952 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
image-20230513111255-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -70.4 KB
Content
image-20230513134006-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -1.9 MB
Content
image-20230515135611-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -948.0 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0