Last modified by Bei Jinggeng on 2025/01/10 15:51
<
From version < 43.35 >
edited by Xiaoling
on 2023/05/16 14:49
To version < 38.1 >
edited by Saxer Lin
on 2023/05/13 13:40
>
Change comment: Uploaded new attachment "image-20230513134006-1.png", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -SN50v3-LB LoRaWAN Sensor Node User Manual
1 +SN50v3-LB User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Saxer
Content
... ... @@ -1,5 +1,4 @@
1 -(% style="text-align:center" %)
2 -[[image:image-20230515135611-1.jpeg||height="589" width="589"]]
1 +[[image:image-20230511201248-1.png||height="403" width="489"]]
3 3  
4 4  
5 5  
... ... @@ -16,15 +16,18 @@
16 16  
17 17  == 1.1 What is SN50v3-LB LoRaWAN Generic Node ==
18 18  
19 -
20 20  (% style="color:blue" %)**SN50V3-LB **(%%)LoRaWAN Sensor Node is a Long Range LoRa Sensor Node. It is designed for outdoor use and powered by (% style="color:blue" %)** 8500mA Li/SOCl2 battery**(%%) for long term use.SN50V3-LB is designed to facilitate developers to quickly deploy industrial level LoRa and IoT solutions. It help users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to program, create and connect your things everywhere.
21 21  
20 +
22 22  (% style="color:blue" %)**SN50V3-LB wireless part**(%%) is based on SX1262 allows the user to send data and reach extremely long ranges at low data-rates.It provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, and so on.
23 23  
23 +
24 24  (% style="color:blue" %)**SN50V3-LB **(%%)has a powerful 48Mhz ARM microcontroller with 256KB flash and 64KB RAM. It has multiplex I/O pins to connect to different sensors.
25 25  
26 +
26 26  (% style="color:blue" %)**SN50V3-LB**(%%) has a built-in BLE module, user can configure the sensor remotely via Mobile Phone. It also support OTA upgrade via private LoRa protocol for easy maintaining.
27 27  
29 +
28 28  SN50V3-LB is the 3^^rd^^ generation of LSN50 series generic sensor node from Dragino. It is an (% style="color:blue" %)**open source project**(%%) and has a mature LoRaWAN stack and application software. User can use the pre-load software for their IoT projects or easily customize the software for different requirements.
29 29  
30 30  
... ... @@ -42,7 +42,6 @@
42 42  
43 43  == 1.3 Specification ==
44 44  
45 -
46 46  (% style="color:#037691" %)**Common DC Characteristics:**
47 47  
48 48  * Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
... ... @@ -79,7 +79,6 @@
79 79  
80 80  == 1.4 Sleep mode and working mode ==
81 81  
82 -
83 83  (% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
84 84  
85 85  (% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
... ... @@ -137,7 +137,6 @@
137 137  
138 138  == Hole Option ==
139 139  
140 -
141 141  SN50v3-LB has different hole size options for different size sensor cable. The options provided are M12, M16 and M20. The definition is as below:
142 142  
143 143  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220627104757-1.png?rev=1.1||alt="image-20220627104757-1.png"]]
... ... @@ -291,21 +291,31 @@
291 291  
292 292  ==== 2.3.2.1  MOD~=1 (Default Mode) ====
293 293  
294 -
295 295  In this mode, uplink payload includes in total 11 bytes. Uplink packets use FPORT=2.
296 296  
297 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
298 -|(% style="width:50px;background-color:#D9E2F3;color:#0070C0" %)**Size(bytes)**|(% style="width:20px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:100px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:40px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:90px;background-color:#D9E2F3;color:#0070C0" %)**1**|(% style="width:130px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:90px;background-color:#D9E2F3;color:#0070C0" %)**2**
299 -|**Value**|Bat|(% style="width:191px" %)(((
300 -Temperature(DS18B20)(PC13)
301 -)))|(% style="width:78px" %)(((
302 -ADC(PA4)
295 +|**Size(bytes)**|**2**|**2**|**2**|(% style="width:216px" %)**1**|(% style="width:342px" %)**2**|(% style="width:171px" %)**2**
296 +|**Value**|Bat|(((
297 +Temperature(DS18B20)
298 +
299 +(PC13)
300 +)))|(((
301 +ADC
302 +
303 +(PA4)
303 303  )))|(% style="width:216px" %)(((
304 -Digital in(PB15)&Digital Interrupt(PA8)
305 -)))|(% style="width:308px" %)(((
306 -Temperature(SHT20 or SHT31 or BH1750 Illumination Sensor)
307 -)))|(% style="width:154px" %)(((
308 -Humidity(SHT20 or SHT31)
305 +Digital in(PB15) &
306 +
307 +Digital Interrupt(PA8)
308 +
309 +
310 +)))|(% style="width:342px" %)(((
311 +Temperature
312 +
313 +(SHT20 or SHT31 or BH1750 Illumination Sensor)
314 +)))|(% style="width:171px" %)(((
315 +Humidity
316 +
317 +(SHT20 or SHT31)
309 309  )))
310 310  
311 311  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220627150949-6.png?rev=1.1||alt="image-20220627150949-6.png"]]
... ... @@ -315,26 +315,33 @@
315 315  
316 316  This mode is target to measure the distance. The payload of this mode is totally 11 bytes. The 8^^th^^ and 9^^th^^ bytes is for the distance.
317 317  
318 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
319 -|(% style="width:40px;background-color:#D9E2F3;color:#0070C0" %)**Size(bytes)**|(% style="width:40px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:110px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:40px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:110px;background-color:#D9E2F3;color:#0070C0" %)**1**|(% style="width:140px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:40px;background-color:#D9E2F3;color:#0070C0" %)**2**
320 -|**Value**|BAT|(% style="width:196px" %)(((
321 -Temperature(DS18B20)(PC13)
322 -)))|(% style="width:87px" %)(((
323 -ADC(PA4)
324 -)))|(% style="width:189px" %)(((
325 -Digital in(PB15) & Digital Interrupt(PA8)
326 -)))|(% style="width:208px" %)(((
327 -Distance measure by:1) LIDAR-Lite V3HP
328 -Or 2) Ultrasonic Sensor
329 -)))|(% style="width:117px" %)Reserved
327 +|**Size(bytes)**|**2**|**2**|**2**|**1**|**2**|**2**
328 +|**Value**|BAT|(((
329 +Temperature(DS18B20)
330 330  
331 +(PC13)
332 +)))|(((
333 +ADC
334 +
335 +(PA4)
336 +)))|(((
337 +Digital in(PB15) &
338 +
339 +Digital Interrupt(PA8)
340 +)))|(((
341 +Distance measure by:
342 +1) LIDAR-Lite V3HP
343 +Or
344 +2) Ultrasonic Sensor
345 +)))|Reserved
346 +
331 331  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656324539647-568.png?rev=1.1||alt="1656324539647-568.png"]]
332 332  
333 -(% style="color:blue" %)**Connection of LIDAR-Lite V3HP:**
349 +**Connection of LIDAR-Lite V3HP:**
334 334  
335 335  [[image:image-20230512173758-5.png||height="563" width="712"]]
336 336  
337 -(% style="color:blue" %)**Connection to Ultrasonic Sensor:**
353 +**Connection to Ultrasonic Sensor:**
338 338  
339 339  Need to remove R1 and R2 resistors to get low power,otherwise there will be 240uA standby current.
340 340  
... ... @@ -342,19 +342,24 @@
342 342  
343 343  For the connection to TF-Mini or TF-Luna , MOD2 payload is as below:
344 344  
345 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
346 -|(% style="width:50px;background-color:#D9E2F3;color:#0070C0" %)**Size(bytes)**|(% style="width:20px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:100px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:100px;background-color:#D9E2F3;color:#0070C0" %)**1**|(% style="width:50px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:120px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:80px;background-color:#D9E2F3;color:#0070C0" %)**2**
347 -|**Value**|BAT|(% style="width:183px" %)(((
348 -Temperature(DS18B20)(PC13)
349 -)))|(% style="width:173px" %)(((
350 -Digital in(PB15) & Digital Interrupt(PA8)
351 -)))|(% style="width:84px" %)(((
352 -ADC(PA4)
353 -)))|(% style="width:323px" %)(((
361 +|**Size(bytes)**|**2**|**2**|**1**|**2**|**2**|**2**
362 +|**Value**|BAT|(((
363 +Temperature(DS18B20)
364 +
365 +(PC13)
366 +)))|(((
367 +Digital in(PB15) &
368 +
369 +Digital Interrupt(PA8)
370 +)))|(((
371 +ADC
372 +
373 +(PA4)
374 +)))|(((
354 354  Distance measure by:1)TF-Mini plus LiDAR
355 355  Or 
356 356  2) TF-Luna LiDAR
357 -)))|(% style="width:188px" %)Distance signal  strength
378 +)))|Distance signal  strength
358 358  
359 359  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656376779088-686.png?rev=1.1||alt="1656376779088-686.png"]]
360 360  
... ... @@ -375,22 +375,32 @@
375 375  
376 376  This mode has total 12 bytes. Include 3 x ADC + 1x I2C
377 377  
378 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
379 -|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
399 +(% style="width:1031px" %)
400 +|=(((
380 380  **Size(bytes)**
381 -)))|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 140px;background-color:#D9E2F3;color:#0070C0" %)2|=(% style="width: 120px;background-color:#D9E2F3;color:#0070C0" %)2|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)1
402 +)))|=(% style="width: 68px;" %)**2**|=(% style="width: 75px;" %)**2**|=**2**|=**1**|=(% style="width: 304px;" %)2|=(% style="width: 163px;" %)2|=(% style="width: 53px;" %)1
382 382  |**Value**|(% style="width:68px" %)(((
383 -ADC1(PA4)
404 +ADC1
405 +
406 +(PA4)
384 384  )))|(% style="width:75px" %)(((
385 -ADC2(PA5)
408 +ADC2
409 +
410 +(PA5)
386 386  )))|(((
387 -ADC3(PA8)
412 +ADC3
413 +
414 +(PA8)
388 388  )))|(((
389 389  Digital Interrupt(PB15)
390 390  )))|(% style="width:304px" %)(((
391 -Temperature(SHT20 or SHT31 or BH1750 Illumination Sensor)
418 +Temperature
419 +
420 +(SHT20 or SHT31 or BH1750 Illumination Sensor)
392 392  )))|(% style="width:163px" %)(((
393 -Humidity(SHT20 or SHT31)
422 +Humidity
423 +
424 +(SHT20 or SHT31)
394 394  )))|(% style="width:53px" %)Bat
395 395  
396 396  [[image:image-20230513110214-6.png]]
... ... @@ -398,25 +398,30 @@
398 398  
399 399  ==== 2.3.2.4 MOD~=4 (3 x DS18B20) ====
400 400  
432 +[[image:image-20230512170701-3.png||height="565" width="743"]]
401 401  
402 402  This mode has total 11 bytes. As shown below:
403 403  
404 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
405 -|(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**Size(bytes)**|(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**1**|(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**2**
436 +(% style="width:1017px" %)
437 +|**Size(bytes)**|**2**|(% style="width:186px" %)**2**|(% style="width:82px" %)**2**|(% style="width:210px" %)**1**|(% style="width:191px" %)**2**|(% style="width:183px" %)**2**
406 406  |**Value**|BAT|(% style="width:186px" %)(((
407 -Temperature1(DS18B20)(PC13)
439 +Temperature1(DS18B20)
440 +(PC13)
408 408  )))|(% style="width:82px" %)(((
409 -ADC(PA4)
442 +ADC
443 +
444 +(PA4)
410 410  )))|(% style="width:210px" %)(((
411 -Digital in(PB15) & Digital Interrupt(PA8) 
446 +Digital in(PB15) &
447 +
448 +Digital Interrupt(PA8) 
412 412  )))|(% style="width:191px" %)Temperature2(DS18B20)
413 -(PB9)|(% style="width:183px" %)Temperature3(DS18B20)(PB8)
450 +(PB9)|(% style="width:183px" %)Temperature3(DS18B20)
451 +(PB8)
414 414  
415 415  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656377606181-607.png?rev=1.1||alt="1656377606181-607.png"]]
416 416  
417 -[[image:image-20230513134006-1.png||height="559" width="736"]]
418 418  
419 -
420 420  ==== 2.3.2.5  MOD~=5(Weight Measurement by HX711) ====
421 421  
422 422  [[image:image-20230512164658-2.png||height="532" width="729"]]
... ... @@ -437,19 +437,25 @@
437 437  
438 438  Check the response of this command and adjust the value to match the real value for thing.
439 439  
440 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
441 -|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
476 +(% style="width:982px" %)
477 +|=(((
442 442  **Size(bytes)**
443 -)))|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 150px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 200px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**4**
444 -|**Value**|BAT|(% style="width:193px" %)(((
479 +)))|=**2**|=(% style="width: 282px;" %)**2**|=(% style="width: 119px;" %)**2**|=(% style="width: 279px;" %)**1**|=(% style="width: 106px;" %)**4**
480 +|**Value**|BAT|(% style="width:282px" %)(((
445 445  Temperature(DS18B20)
482 +
446 446  (PC13)
447 -)))|(% style="width:85px" %)(((
448 -ADC(PA4)
449 -)))|(% style="width:186px" %)(((
484 +
485 +
486 +)))|(% style="width:119px" %)(((
487 +ADC
488 +
489 +(PA4)
490 +)))|(% style="width:279px" %)(((
450 450  Digital in(PB15) &
492 +
451 451  Digital Interrupt(PA8)
452 -)))|(% style="width:100px" %)Weight
494 +)))|(% style="width:106px" %)Weight
453 453  
454 454  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220820120036-2.png?width=1003&height=469&rev=1.1||alt="image-20220820120036-2.png" height="469" width="1003"]]
455 455  
... ... @@ -462,18 +462,26 @@
462 462  
463 463  [[image:image-20230512181814-9.png||height="543" width="697"]]
464 464  
465 -(% style="color:red" %)**Note:** LoRaWAN wireless transmission will infect the PIR sensor. Which cause the counting value increase +1 for every uplink. User can change PIR sensor or put sensor away of the SN50_v3 to avoid this happen.
507 +**Note:** LoRaWAN wireless transmission will infect the PIR sensor. Which cause the counting value increase +1 for every uplink. User can change PIR sensor or put sensor away of the SN50_v3 to avoid this happen.
466 466  
467 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px %)
468 -|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**Size(bytes)**|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 220px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 80px;background-color:#D9E2F3;color:#0070C0" %)**4**
509 +(% style="width:961px" %)
510 +|=**Size(bytes)**|=**2**|=(% style="width: 256px;" %)**2**|=(% style="width: 108px;" %)**2**|=(% style="width: 126px;" %)**1**|=(% style="width: 145px;" %)**4**
469 469  |**Value**|BAT|(% style="width:256px" %)(((
470 -Temperature(DS18B20)(PC13)
512 +Temperature(DS18B20)
513 +
514 +(PC13)
471 471  )))|(% style="width:108px" %)(((
472 -ADC(PA4)
516 +ADC
517 +
518 +(PA4)
473 473  )))|(% style="width:126px" %)(((
474 -Digital in(PB15)
520 +Digital in
521 +
522 +(PB15)
475 475  )))|(% style="width:145px" %)(((
476 -Count(PA8)
524 +Count
525 +
526 +(PA8)
477 477  )))
478 478  
479 479  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656378441509-171.png?rev=1.1||alt="1656378441509-171.png"]]
... ... @@ -481,40 +481,46 @@
481 481  
482 482  ==== 2.3.2.7  MOD~=7 (Three interrupt contact modes) ====
483 483  
484 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px %)
485 -|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
534 +|=(((
486 486  **Size(bytes)**
487 -)))|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)1|=(% style="width: 40px;background-color:#D9E2F3;color:#0070C0" %)2
488 -|**Value**|BAT|(% style="width:188px" %)(((
536 +)))|=**2**|=**2**|=**2**|=**1**|=**1**|=1|=2
537 +|**Value**|BAT|(((
489 489  Temperature(DS18B20)
539 +
490 490  (PC13)
491 -)))|(% style="width:83px" %)(((
492 -ADC(PA5)
493 -)))|(% style="width:184px" %)(((
541 +)))|(((
542 +ADC
543 +
544 +(PA5)
545 +)))|(((
494 494  Digital Interrupt1(PA8)
495 -)))|(% style="width:186px" %)Digital Interrupt2(PA4)|(% style="width:197px" %)Digital Interrupt3(PB15)|(% style="width:100px" %)Reserved
547 +)))|Digital Interrupt2(PA4)|Digital Interrupt3(PB15)|Reserved
496 496  
497 497  [[image:image-20230513111203-7.png||height="324" width="975"]]
498 498  
499 499  ==== 2.3.2.8  MOD~=8 （3ADC+1DS18B20） ====
500 500  
501 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px %)
502 -|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
553 +(% style="width:917px" %)
554 +|=(((
503 503  **Size(bytes)**
504 -)))|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)2
556 +)))|=**2**|=(% style="width: 207px;" %)**2**|=(% style="width: 94px;" %)**2**|=(% style="width: 198px;" %)**1**|=(% style="width: 84px;" %)**2**|=(% style="width: 79px;" %)2
505 505  |**Value**|BAT|(% style="width:207px" %)(((
506 506  Temperature(DS18B20)
559 +
507 507  (PC13)
508 508  )))|(% style="width:94px" %)(((
509 509  ADC1
563 +
510 510  (PA4)
511 511  )))|(% style="width:198px" %)(((
512 512  Digital Interrupt(PB15)
513 513  )))|(% style="width:84px" %)(((
514 514  ADC2
569 +
515 515  (PA5)
516 -)))|(% style="width:82px" %)(((
571 +)))|(% style="width:79px" %)(((
517 517  ADC3
573 +
518 518  (PA8)
519 519  )))
520 520  
... ... @@ -529,21 +529,27 @@
529 529  )))|=**2**|=**2**|=**2**|=**1**|=(% style="width: 193px;" %)**2**|=(% style="width: 78px;" %)4|=(% style="width: 78px;" %)4
530 530  |**Value**|BAT|(((
531 531  Temperature1(DS18B20)
588 +
532 532  (PC13)
533 533  )))|(((
534 534  Temperature2(DS18B20)
592 +
535 535  (PB9)
536 536  )))|(((
537 537  Digital Interrupt
596 +
538 538  (PB15)
539 539  )))|(% style="width:193px" %)(((
540 540  Temperature3(DS18B20)
600 +
541 541  (PB8)
542 542  )))|(% style="width:78px" %)(((
543 543  Count1
604 +
544 544  (PA8)
545 545  )))|(% style="width:78px" %)(((
546 546  Count2
608 +
547 547  (PA4)
548 548  )))
549 549  
... ... @@ -587,7 +587,7 @@
587 587  
588 588  ==== 2.3.3.2  Temperature (DS18B20) ====
589 589  
590 -If there is a DS18B20 connected to PC13 pin. The temperature will be uploaded in the payload.
652 +If there is a DS18B20 connected to PB3 pin. The temperature will be uploaded in the payload.
591 591  
592 592  More DS18B20 can check the [[3 DS18B20 mode>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#2.3.4MOD3D4283xDS18B2029]]
593 593  
... ... @@ -615,7 +615,7 @@
615 615  (((
616 616  When the digital interrupt pin is set to AT+INTMODx=0, this pin is used as a digital input pin.
617 617  
618 -(% style="color:red" %)**Note:**The maximum voltage input supports 3.6V.
680 +**Note:**The maximum voltage input supports 3.6V.
619 619  )))
620 620  
621 621  ==== 2.3.3.4  Analogue Digital Converter (ADC) ====
... ... @@ -626,18 +626,17 @@
626 626  
627 627  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220628150112-1.png?width=285&height=241&rev=1.1||alt="image-20220628150112-1.png" height="241" width="285"]]
628 628  
629 -(% style="color:red" %)**Note:**If the ADC type sensor needs to be powered by SN50_v3, it is recommended to use +5V to control its switch.Only sensors with low power consumption can be powered with VDD.
691 +**Note:**If the ADC type sensor needs to be powered by SN50_v3, it is recommended to use +5V to control its switch.Only sensors with low power consumption can be powered with VDD.
630 630  
631 -
632 632  ==== 2.3.3.5 Digital Interrupt ====
633 633  
634 634  Digital Interrupt refers to pin PA8, and there are different trigger methods. When there is a trigger, the SN50v3 will send a packet to the server.
635 635  
636 -(% style="color:blue" %)**~ Interrupt connection method:**
697 +**~ Interrupt connection method:**
637 637  
638 638  [[image:image-20230513105351-5.png||height="147" width="485"]]
639 639  
640 -(% style="color:blue" %)**Example to use with door sensor :**
701 +**Example to use with door sensor :**
641 641  
642 642  The door sensor is shown at right. It is a two wire magnetic contact switch used for detecting the open/close status of doors or windows.
643 643  
... ... @@ -645,7 +645,7 @@
645 645  
646 646  When the two pieces are close to each other, the 2 wire output will be short or open (depending on the type), while if the two pieces are away from each other, the 2 wire output will be the opposite status. So we can use SN50_v3 interrupt interface to detect the status for the door or window.
647 647  
648 -(% style="color:blue" %)**~ Below is the installation example:**
709 +**~ Below is the installation example:**
649 649  
650 650  Fix one piece of the magnetic sensor to the door and connect the two pins to SN50_v3 as follows:
651 651  
... ... @@ -670,7 +670,7 @@
670 670  
671 671  The command is:
672 672  
673 -(% style="color:blue" %)**AT+INTMOD1=1   ** (%%) ~/~/(more info about INMOD please refer** **[[**AT Command Manual**>>url:http://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/&file=DRAGINO_LSN50_AT_Commands_v1.5.1.pdf]]**. **)
734 +**AT+INTMOD1=1       **~/~/(more info about INMOD please refer** **[[**AT Command Manual**>>url:http://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/&file=DRAGINO_LSN50_AT_Commands_v1.5.1.pdf]]**. **)
674 674  
675 675  Below shows some screen captures in TTN V3:
676 676  
... ... @@ -685,14 +685,14 @@
685 685  
686 686  The SDA and SCK are I2C interface lines. You can use these to connect to an I2C device and get the sensor data.
687 687  
688 -We have made an example to show how to use the I2C interface to connect to the SHT20/ SHT31 Temperature and Humidity Sensor.
749 +We have made an example to show how to use the I2C interface to connect to the SHT20 Temperature and Humidity Sensor.
689 689  
690 -Notice: Different I2C sensors have different I2C commands set and initiate process, if user want to use other I2C sensors, User need to re-write the source code to support those sensors. SHT20/ SHT31 code in SN50_v3 will be a good reference.
751 +Notice: Different I2C sensors have different I2C commands set and initiate process, if user want to use other I2C sensors, User need to re-write the source code to support those sensors. SHT20 code in SN50_v3 will be a good reference.
691 691  
692 692  Below is the connection to SHT20/ SHT31. The connection is as below:
693 693  
694 694  
695 -[[image:image-20230513103633-3.png||height="448" width="716"]]
756 +[[image:image-20230513103633-3.png||height="636" width="1017"]]
696 696  
697 697  The device will be able to get the I2C sensor data now and upload to IoT Server.
698 698  
... ... @@ -747,7 +747,7 @@
747 747  
748 748  The 5V output time can be controlled by AT Command.
749 749  
750 -(% style="color:blue" %)**AT+5VT=1000**
811 +**AT+5VT=1000**
751 751  
752 752  Means set 5V valid time to have 1000ms. So the real 5V output will actually have 1000ms + sampling time for other sensors.
753 753  
... ... @@ -759,9 +759,9 @@
759 759  
760 760  MOD=1 support this sensor. The sensor value is in the 8^^th^^ and 9^^th^^ bytes.
761 761  
762 -[[image:image-20230512172447-4.png||height="416" width="712"]]
823 +[[image:image-20230512172447-4.png||height="593" width="1015"]]
763 763  
764 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220628110012-12.png?rev=1.1||alt="image-20220628110012-12.png" height="361" width="953"]]
825 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220628110012-12.png?rev=1.1||alt="image-20220628110012-12.png"]]
765 765  
766 766  
767 767  ==== 2.3.3.12  Working MOD ====
... ... @@ -782,8 +782,6 @@
782 782  * 7: MOD8
783 783  * 8: MOD9
784 784  
785 -
786 -
787 787  == 2.4 Payload Decoder file ==
788 788  
789 789  
... ... @@ -791,7 +791,7 @@
791 791  
792 792  In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from:
793 793  
794 -[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/SN50_v3-LB>>https://github.com/dragino/dragino-end-node-decoder/tree/main/SN50_v3-LB]]
853 +[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/LSN50v2-S31%26S31B >>https://github.com/dragino/dragino-end-node-decoder/tree/main/LSN50v2-S31%26S31B]]
795 795  
796 796  
797 797  
... ... @@ -835,6 +835,7 @@
835 835  
836 836  === 3.3.1 Set Transmit Interval Time ===
837 837  
897 +
838 838  Feature: Change LoRaWAN End Node Transmit Interval.
839 839  
840 840  (% style="color:blue" %)**AT Command: AT+TDC**
... ... @@ -860,11 +860,9 @@
860 860  * Example 1: Downlink Payload: 0100001E  ~/~/  Set Transmit Interval (TDC) = 30 seconds
861 861  * Example 2: Downlink Payload: 0100003C  ~/~/  Set Transmit Interval (TDC) = 60 seconds
862 862  
863 -
864 -
865 865  === 3.3.2 Get Device Status ===
866 866  
867 -Send a LoRaWAN downlink to ask the device to send its status.
925 +Send a LoRaWAN downlink to ask device send Alarm settings.
868 868  
869 869  (% style="color:blue" %)**Downlink Payload:  **(%%)0x26 01
870 870  
... ... @@ -873,6 +873,7 @@
873 873  
874 874  === 3.3.3 Set Interrupt Mode ===
875 875  
934 +
876 876  Feature, Set Interrupt mode for GPIO_EXIT.
877 877  
878 878  (% style="color:blue" %)**AT Command: AT+INTMOD1，AT+INTMOD2，AT+INTMOD3**
... ... @@ -909,8 +909,6 @@
909 909  * Example 3: Downlink Payload: 06000102  **~-~-->**  AT+INTMOD2=2
910 910  * Example 4: Downlink Payload: 06000201  **~-~-->**  AT+INTMOD3=1
911 911  
912 -
913 -
914 914  === 3.3.4 Set Power Output Duration ===
915 915  
916 916  Control the output duration 5V . Before each sampling, device will
... ... @@ -927,6 +927,7 @@
927 927  |=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
928 928  |(% style="width:154px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:157px" %)(((
929 929  500(default)
987 +
930 930  OK
931 931  )))
932 932  |(% style="width:154px" %)AT+5VT=1000|(% style="width:196px" %)(((
... ... @@ -939,11 +939,9 @@
939 939  
940 940  The first and second bytes are the time to turn on.
941 941  
942 -* Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
943 -* Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
1000 +* Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
1001 +* Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
944 944  
945 -
946 -
947 947  === 3.3.5 Set Weighing parameters ===
948 948  
949 949  Feature: Working mode 5 is effective, weight initialization and weight factor setting of HX711.
... ... @@ -958,6 +958,7 @@
958 958  
959 959  (% style="color:blue" %)**Downlink Command: 0x08**
960 960  
1017 +
961 961  Format: Command Code (0x08) followed by 2 bytes or 4 bytes.
962 962  
963 963  Use AT+WEIGRE when the first byte is 1, only 1 byte. When it is 2, use AT+WEIGAP, there are 3 bytes.
... ... @@ -968,8 +968,6 @@
968 968  * Example 2: Downlink Payload: 08020FA3  **~-~-->**  AT+WEIGAP=400.3
969 969  * Example 3: Downlink Payload: 08020FA0  **~-~-->**  AT+WEIGAP=400.0
970 970  
971 -
972 -
973 973  === 3.3.6 Set Digital pulse count value ===
974 974  
975 975  Feature: Set the pulse count value.
... ... @@ -985,6 +985,7 @@
985 985  
986 986  (% style="color:blue" %)**Downlink Command: 0x09**
987 987  
1043 +
988 988  Format: Command Code (0x09) followed by 5 bytes.
989 989  
990 990  The first byte is to select which count value to initialize, and the next four bytes are the count value to be initialized.
... ... @@ -992,8 +992,6 @@
992 992  * Example 1: Downlink Payload: 090100000000  **~-~-->**  AT+SETCNT=1,0
993 993  * Example 2: Downlink Payload: 0902000003E8  **~-~-->**  AT+SETCNT=2,1000
994 994  
995 -
996 -
997 997  === 3.3.7 Set Workmode ===
998 998  
999 999  Feature: Switch working mode.
... ... @@ -1007,18 +1007,18 @@
1007 1007  )))
1008 1008  |(% style="width:154px" %)AT+MOD=4|(% style="width:196px" %)Set the working mode to 3DS18B20s.|(% style="width:157px" %)(((
1009 1009  OK
1064 +
1010 1010  Attention:Take effect after ATZ
1011 1011  )))
1012 1012  
1013 1013  (% style="color:blue" %)**Downlink Command: 0x0A**
1014 1014  
1070 +
1015 1015  Format: Command Code (0x0A) followed by 1 bytes.
1016 1016  
1017 1017  * Example 1: Downlink Payload: 0A01  **~-~-->**  AT+MOD=1
1018 1018  * Example 2: Downlink Payload: 0A04  **~-~-->**  AT+MOD=4
1019 1019  
1020 -
1021 -
1022 1022  = 4. Battery & Power Consumption =
1023 1023  
1024 1024  
... ... @@ -1092,5 +1092,4 @@
1092 1092  
1093 1093  
1094 1094  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1095 -
1096 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.cc>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.cc]]
1149 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
image-20230515135611-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -948.0 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0