Last modified by Bei Jinggeng on 2025/01/10 15:51
<
From version < 43.27 >
edited by Xiaoling
on 2023/05/16 14:32
To version < 11.2 >
edited by Edwin Chen
on 2023/05/11 23:01
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -SN50v3-LB LoRaWAN Sensor Node User Manual
1 +SN50v3-LB User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Edwin
Content
... ... @@ -1,5 +1,4 @@
1 -(% style="text-align:center" %)
2 -[[image:image-20230515135611-1.jpeg||height="589" width="589"]]
1 +[[image:image-20230511201248-1.png||height="403" width="489"]]
3 3  
4 4  
5 5  
... ... @@ -16,15 +16,18 @@
16 16  
17 17  == 1.1 What is SN50v3-LB LoRaWAN Generic Node ==
18 18  
19 -
20 20  (% style="color:blue" %)**SN50V3-LB **(%%)LoRaWAN Sensor Node is a Long Range LoRa Sensor Node. It is designed for outdoor use and powered by (% style="color:blue" %)** 8500mA Li/SOCl2 battery**(%%) for long term use.SN50V3-LB is designed to facilitate developers to quickly deploy industrial level LoRa and IoT solutions. It help users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to program, create and connect your things everywhere.
21 21  
20 +
22 22  (% style="color:blue" %)**SN50V3-LB wireless part**(%%) is based on SX1262 allows the user to send data and reach extremely long ranges at low data-rates.It provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, and so on.
23 23  
23 +
24 24  (% style="color:blue" %)**SN50V3-LB **(%%)has a powerful 48Mhz ARM microcontroller with 256KB flash and 64KB RAM. It has multiplex I/O pins to connect to different sensors.
25 25  
26 +
26 26  (% style="color:blue" %)**SN50V3-LB**(%%) has a built-in BLE module, user can configure the sensor remotely via Mobile Phone. It also support OTA upgrade via private LoRa protocol for easy maintaining.
27 27  
29 +
28 28  SN50V3-LB is the 3^^rd^^ generation of LSN50 series generic sensor node from Dragino. It is an (% style="color:blue" %)**open source project**(%%) and has a mature LoRaWAN stack and application software. User can use the pre-load software for their IoT projects or easily customize the software for different requirements.
29 29  
30 30  
... ... @@ -42,7 +42,6 @@
42 42  
43 43  == 1.3 Specification ==
44 44  
45 -
46 46  (% style="color:#037691" %)**Common DC Characteristics:**
47 47  
48 48  * Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
... ... @@ -79,7 +79,6 @@
79 79  
80 80  == 1.4 Sleep mode and working mode ==
81 81  
82 -
83 83  (% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
84 84  
85 85  (% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
... ... @@ -122,7 +122,7 @@
122 122  == 1.7 Pin Definitions ==
123 123  
124 124  
125 -[[image:image-20230513102034-2.png]]
125 +[[image:image-20230511203450-2.png||height="443" width="785"]]
126 126  
127 127  
128 128  == 1.8 Mechanical ==
... ... @@ -137,7 +137,6 @@
137 137  
138 138  == Hole Option ==
139 139  
140 -
141 141  SN50v3-LB has different hole size options for different size sensor cable. The options provided are M12, M16 and M20. The definition is as below:
142 142  
143 143  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220627104757-1.png?rev=1.1||alt="image-20220627104757-1.png"]]
... ... @@ -273,335 +273,39 @@
273 273  Ex2: 0x0B49 = 2889mV
274 274  
275 275  
276 -=== 2.3.2 Working Modes & Sensor Data. Uplink via FPORT~=2 ===
275 +=== 2.3.2  Sensor Data. FPORT~=2 ===
277 277  
278 278  
279 -SN50v3 has different working mode for the connections of different type of sensors. This section describes these modes. Use can use the AT Command AT+MOD to set SN50v3 to different working modes.
278 +Sensor Data is uplink via FPORT=2
280 280  
281 -For example:
282 -
283 - **AT+MOD=2  ** ~/~/ will set the SN50v3 to work in MOD=2 distance mode which target to measure distance via Ultrasonic Sensor.
284 -
285 -
286 -(% style="color:red" %) **Important Notice:**
287 -
288 -1. Some working modes has payload more than 12 bytes, The US915/AU915/AS923 frequency bands' definition has maximum 11 bytes in **DR0**. Server sides will see NULL payload while SN50v3 transmit in DR0 with 12 bytes payload.
289 -1. All modes share the same Payload Explanation from HERE.
290 -1. By default, the device will send an uplink message every 20 minutes.
291 -
292 -==== 2.3.2.1  MOD~=1 (Default Mode) ====
293 -
294 -
295 -In this mode, uplink payload includes in total 11 bytes. Uplink packets use FPORT=2.
296 -
297 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
298 -|(% style="width:50px;background-color:#D9E2F3;color:#0070C0" %)**Size(bytes)**|(% style="width:20px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:100px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:40px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:90px;background-color:#D9E2F3;color:#0070C0" %)**1**|(% style="width:130px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:90px;background-color:#D9E2F3;color:#0070C0" %)**2**
299 -|**Value**|Bat|(% style="width:191px" %)(((
300 -Temperature(DS18B20)(PC13)
301 -)))|(% style="width:78px" %)(((
302 -ADC(PA4)
303 -)))|(% style="width:216px" %)(((
304 -Digital in(PB15)&Digital Interrupt(PA8)
305 -)))|(% style="width:308px" %)(((
306 -Temperature(SHT20 or SHT31 or BH1750 Illumination Sensor)
307 -)))|(% style="width:154px" %)(((
308 -Humidity(SHT20 or SHT31)
309 -)))
310 -
311 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220627150949-6.png?rev=1.1||alt="image-20220627150949-6.png"]]
312 -
313 -
314 -==== 2.3.2.2  MOD~=2 (Distance Mode) ====
315 -
316 -This mode is target to measure the distance. The payload of this mode is totally 11 bytes. The 8^^th^^ and 9^^th^^ bytes is for the distance.
317 -
318 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
319 -|(% style="width:40px;background-color:#D9E2F3;color:#0070C0" %)**Size(bytes)**|(% style="width:40px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:110px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:40px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:110px;background-color:#D9E2F3;color:#0070C0" %)**1**|(% style="width:140px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:40px;background-color:#D9E2F3;color:#0070C0" %)**2**
320 -|**Value**|BAT|(% style="width:196px" %)(((
321 -Temperature(DS18B20)(PC13)
322 -)))|(% style="width:87px" %)(((
323 -ADC(PA4)
324 -)))|(% style="width:189px" %)(((
325 -Digital in(PB15) & Digital Interrupt(PA8)
326 -)))|(% style="width:208px" %)(((
327 -Distance measure by:1) LIDAR-Lite V3HP
328 -Or 2) Ultrasonic Sensor
329 -)))|(% style="width:117px" %)Reserved
330 -
331 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656324539647-568.png?rev=1.1||alt="1656324539647-568.png"]]
332 -
333 -(% style="color:blue" %)**Connection of LIDAR-Lite V3HP:**
334 -
335 -[[image:image-20230512173758-5.png||height="563" width="712"]]
336 -
337 -(% style="color:blue" %)**Connection to Ultrasonic Sensor:**
338 -
339 -Need to remove R1 and R2 resistors to get low power,otherwise there will be 240uA standby current.
340 -
341 -[[image:image-20230512173903-6.png||height="596" width="715"]]
342 -
343 -For the connection to TF-Mini or TF-Luna , MOD2 payload is as below:
344 -
345 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
346 -|(% style="width:50px;background-color:#D9E2F3;color:#0070C0" %)**Size(bytes)**|(% style="width:20px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:100px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:100px;background-color:#D9E2F3;color:#0070C0" %)**1**|(% style="width:50px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:120px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width:80px;background-color:#D9E2F3;color:#0070C0" %)**2**
347 -|**Value**|BAT|(% style="width:183px" %)(((
348 -Temperature(DS18B20)(PC13)
349 -)))|(% style="width:173px" %)(((
350 -Digital in(PB15) & Digital Interrupt(PA8)
351 -)))|(% style="width:84px" %)(((
352 -ADC(PA4)
353 -)))|(% style="width:323px" %)(((
354 -Distance measure by:1)TF-Mini plus LiDAR
355 -Or 
356 -2) TF-Luna LiDAR
357 -)))|(% style="width:188px" %)Distance signal  strength
358 -
359 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656376779088-686.png?rev=1.1||alt="1656376779088-686.png"]]
360 -
361 -**Connection to [[TF-Mini plus>>url:http://en.benewake.com/product/detail/5c345cd0e5b3a844c472329b.html]] LiDAR(UART version):**
362 -
363 -Need to remove R3 and R4 resistors to get low power,otherwise there will be 400uA standby current.
364 -
365 -[[image:image-20230512180609-7.png||height="555" width="802"]]
366 -
367 -**Connection to [[TF-Luna>>url:http://en.benewake.com/product/detail/5e1c1fd04d839408076b6255.html]] LiDAR (UART version):**
368 -
369 -Need to remove R3 and R4 resistors to get low power,otherwise there will be 400uA standby current.
370 -
371 -[[image:image-20230513105207-4.png||height="469" width="802"]]
372 -
373 -
374 -==== 2.3.2.3  MOD~=3 (3 ADC + I2C) ====
375 -
376 -This mode has total 12 bytes. Include 3 x ADC + 1x I2C
377 -
378 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
379 -|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
280 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
281 +|=(% style="width: 90px;background-color:#D9E2F3" %)(((
380 380  **Size(bytes)**
381 -)))|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 140px;background-color:#D9E2F3;color:#0070C0" %)2|=(% style="width: 120px;background-color:#D9E2F3;color:#0070C0" %)2|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)1
382 -|**Value**|(% style="width:68px" %)(((
383 -ADC1(PA4)
384 -)))|(% style="width:75px" %)(((
385 -ADC2(PA5)
386 -)))|(((
387 -ADC3(PA8)
388 -)))|(((
389 -Digital Interrupt(PB15)
390 -)))|(% style="width:304px" %)(((
391 -Temperature(SHT20 or SHT31 or BH1750 Illumination Sensor)
392 -)))|(% style="width:163px" %)(((
393 -Humidity(SHT20 or SHT31)
394 -)))|(% style="width:53px" %)Bat
395 -
396 -[[image:image-20230513110214-6.png]]
397 -
398 -
399 -==== 2.3.2.4 MOD~=4 (3 x DS18B20) ====
400 -
401 -
402 -This mode has total 11 bytes. As shown below:
403 -
404 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
405 -|(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**Size(bytes)**|(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**1**|(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**2**|(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**2**
406 -|**Value**|BAT|(% style="width:186px" %)(((
407 -Temperature1(DS18B20)(PC13)
408 -)))|(% style="width:82px" %)(((
409 -ADC(PA4)
410 -)))|(% style="width:210px" %)(((
411 -Digital in(PB15) & Digital Interrupt(PA8) 
412 -)))|(% style="width:191px" %)Temperature2(DS18B20)
413 -(PB9)|(% style="width:183px" %)Temperature3(DS18B20)(PB8)
414 -
415 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656377606181-607.png?rev=1.1||alt="1656377606181-607.png"]]
416 -
417 -[[image:image-20230513134006-1.png||height="559" width="736"]]
418 -
419 -
420 -==== 2.3.2.5  MOD~=5(Weight Measurement by HX711) ====
421 -
422 -[[image:image-20230512164658-2.png||height="532" width="729"]]
423 -
424 -Each HX711 need to be calibrated before used. User need to do below two steps:
425 -
426 -1. Zero calibration. Don't put anything on load cell and run **AT+WEIGRE** to calibrate to Zero gram.
427 -1. Adjust calibration factor (default value 400): Put a known weight thing on load cell and run **AT+WEIGAP** to adjust the Calibration Factor.
428 -1. (((
429 -Weight has 4 bytes, the unit is g.
283 +)))|=(% style="width: 80px;background-color:#D9E2F3" %)2|=(% style="width: 90px;background-color:#D9E2F3" %)4|=(% style="width:80px;background-color:#D9E2F3" %)1|=(% style="width: 80px;background-color:#D9E2F3" %)**2**|=(% style="width: 80px;background-color:#D9E2F3" %)2
284 +|(% style="width:99px" %)**Value**|(% style="width:69px" %)(((
285 +[[Battery>>||anchor="HBattery:"]]
286 +)))|(% style="width:130px" %)(((
287 +[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
288 +)))|(% style="width:91px" %)(((
289 +[[Alarm Flag>>||anchor="HAlarmFlag26MOD:"]]
290 +)))|(% style="width:103px" %)(((
291 +[[Temperature>>||anchor="HTemperature:"]]
292 +)))|(% style="width:80px" %)(((
293 +[[Humidity>>||anchor="HHumidity:"]]
430 430  )))
431 431  
432 -For example:
296 +==== (% style="color:#4472c4" %)**Battery**(%%) ====
433 433  
434 -**AT+GETSENSORVALUE =0**
298 +Sensor Battery Level.
435 435  
436 -Response:  Weight is 401 g
437 -
438 -Check the response of this command and adjust the value to match the real value for thing.
439 -
440 -(% style="width:767px" %)
441 -|=(((
442 -**Size(bytes)**
443 -)))|=**2**|=(% style="width: 193px;" %)**2**|=(% style="width: 85px;" %)**2**|=(% style="width: 186px;" %)**1**|=(% style="width: 100px;" %)**4**
444 -|**Value**|BAT|(% style="width:193px" %)(((
445 -Temperature(DS18B20)
446 -(PC13)
447 -)))|(% style="width:85px" %)(((
448 -ADC
449 -(PA4)
450 -)))|(% style="width:186px" %)(((
451 -Digital in(PB15) &
452 -Digital Interrupt(PA8)
453 -)))|(% style="width:100px" %)Weight
454 -
455 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220820120036-2.png?width=1003&height=469&rev=1.1||alt="image-20220820120036-2.png" height="469" width="1003"]]
456 -
457 -
458 -==== 2.3.2.6  MOD~=6 (Counting Mode) ====
459 -
460 -In this mode, the device will work in counting mode. It counts the interrupt on the interrupt pins and sends the count on TDC time.
461 -
462 -Connection is as below. The PIR sensor is a count sensor, it will generate interrupt when people come close or go away. User can replace the PIR sensor with other counting sensors.
463 -
464 -[[image:image-20230512181814-9.png||height="543" width="697"]]
465 -
466 -**Note:** LoRaWAN wireless transmission will infect the PIR sensor. Which cause the counting value increase +1 for every uplink. User can change PIR sensor or put sensor away of the SN50_v3 to avoid this happen.
467 -
468 -(% style="width:961px" %)
469 -|=**Size(bytes)**|=**2**|=(% style="width: 256px;" %)**2**|=(% style="width: 108px;" %)**2**|=(% style="width: 126px;" %)**1**|=(% style="width: 145px;" %)**4**
470 -|**Value**|BAT|(% style="width:256px" %)(((
471 -Temperature(DS18B20)
472 -
473 -(PC13)
474 -)))|(% style="width:108px" %)(((
475 -ADC
476 -(PA4)
477 -)))|(% style="width:126px" %)(((
478 -Digital in
479 -(PB15)
480 -)))|(% style="width:145px" %)(((
481 -Count
482 -(PA8)
483 -)))
484 -
485 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656378441509-171.png?rev=1.1||alt="1656378441509-171.png"]]
486 -
487 -
488 -==== 2.3.2.7  MOD~=7 (Three interrupt contact modes) ====
489 -
490 -(% style="width:1108px" %)
491 -|=(((
492 -**Size(bytes)**
493 -)))|=**2**|=(% style="width: 188px;" %)**2**|=(% style="width: 83px;" %)**2**|=(% style="width: 184px;" %)**1**|=(% style="width: 186px;" %)**1**|=(% style="width: 197px;" %)1|=(% style="width: 100px;" %)2
494 -|**Value**|BAT|(% style="width:188px" %)(((
495 -Temperature(DS18B20)
496 -(PC13)
497 -)))|(% style="width:83px" %)(((
498 -ADC
499 -(PA5)
500 -)))|(% style="width:184px" %)(((
501 -Digital Interrupt1(PA8)
502 -)))|(% style="width:186px" %)Digital Interrupt2(PA4)|(% style="width:197px" %)Digital Interrupt3(PB15)|(% style="width:100px" %)Reserved
503 -
504 -[[image:image-20230513111203-7.png||height="324" width="975"]]
505 -
506 -==== 2.3.2.8  MOD~=8 （3ADC+1DS18B20） ====
507 -
508 -(% style="width:922px" %)
509 -|=(((
510 -**Size(bytes)**
511 -)))|=**2**|=(% style="width: 207px;" %)**2**|=(% style="width: 94px;" %)**2**|=(% style="width: 198px;" %)**1**|=(% style="width: 84px;" %)**2**|=(% style="width: 82px;" %)2
512 -|**Value**|BAT|(% style="width:207px" %)(((
513 -Temperature(DS18B20)
514 -(PC13)
515 -)))|(% style="width:94px" %)(((
516 -ADC1
517 -(PA4)
518 -)))|(% style="width:198px" %)(((
519 -Digital Interrupt(PB15)
520 -)))|(% style="width:84px" %)(((
521 -ADC2
522 -(PA5)
523 -)))|(% style="width:82px" %)(((
524 -ADC3
525 -(PA8)
526 -)))
527 -
528 -[[image:image-20230513111231-8.png||height="335" width="900"]]
529 -
530 -
531 -==== 2.3.2.9  MOD~=9 (3DS18B20+ two Interrupt count mode) ====
532 -
533 -(% style="width:1010px" %)
534 -|=(((
535 -**Size(bytes)**
536 -)))|=**2**|=**2**|=**2**|=**1**|=(% style="width: 193px;" %)**2**|=(% style="width: 78px;" %)4|=(% style="width: 78px;" %)4
537 -|**Value**|BAT|(((
538 -Temperature1(DS18B20)
539 -(PC13)
540 -)))|(((
541 -Temperature2(DS18B20)
542 -(PB9)
543 -)))|(((
544 -Digital Interrupt
545 -(PB15)
546 -)))|(% style="width:193px" %)(((
547 -Temperature3(DS18B20)
548 -(PB8)
549 -)))|(% style="width:78px" %)(((
550 -Count1
551 -(PA8)
552 -)))|(% style="width:78px" %)(((
553 -Count2
554 -(PA4)
555 -)))
556 -
557 -[[image:image-20230513111255-9.png||height="341" width="899"]]
558 -
559 -**The newly added AT command is issued correspondingly:**
560 -
561 -**~ AT+INTMOD1** ** PA8**  pin：  Corresponding downlink:  **06 00 00 xx**
562 -
563 -**~ AT+INTMOD2**  **PA4**  pin：  Corresponding downlink:**  06 00 01 xx**
564 -
565 -**~ AT+INTMOD3**  **PB15**  pin：  Corresponding downlink:  ** 06 00 02 xx**
566 -
567 -**AT+SETCNT=aa,bb** 
568 -
569 -When AA is 1, set the count of PA8 pin to BB Corresponding downlink：09 01 bb bb bb bb
570 -
571 -When AA is 2, set the count of PA4 pin to BB Corresponding downlink：09 02 bb bb bb bb
572 -
573 -
574 -
575 -=== 2.3.3  ​Decode payload ===
576 -
577 -While using TTN V3 network, you can add the payload format to decode the payload.
578 -
579 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656378466788-734.png?rev=1.1||alt="1656378466788-734.png"]]
580 -
581 -The payload decoder function for TTN V3 are here:
582 -
583 -SN50v3 TTN V3 Payload Decoder:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>url:https://github.com/dragino/dragino-end-node-decoder]]
584 -
585 -
586 -==== 2.3.3.1 Battery Info ====
587 -
588 -Check the battery voltage for SN50v3.
589 -
590 590  Ex1: 0x0B45 = 2885mV
591 591  
592 592  Ex2: 0x0B49 = 2889mV
593 593  
594 594  
595 -==== 2.3.3.2  Temperature (DS18B20) ====
596 596  
597 -If there is a DS18B20 connected to PC13 pin. The temperature will be uploaded in the payload.
306 +==== (% style="color:#4472c4" %)**Temperature**(%%) ====
598 598  
599 -More DS18B20 can check the [[3 DS18B20 mode>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#2.3.4MOD3D4283xDS18B2029]]
600 -
601 -**Connection:**
602 -
603 -[[image:image-20230512180718-8.png||height="538" width="647"]]
604 -
605 605  **Example**:
606 606  
607 607  If payload is: 0105H:  (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
... ... @@ -611,211 +611,195 @@
611 611  （FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
612 612  
613 613  
614 -==== 2.3.3.3 Digital Input ====
317 +==== (% style="color:#4472c4" %)**Humidity**(%%) ====
615 615  
616 -The digital input for pin PB15,
617 617  
618 -* When PB15 is high, the bit 1 of payload byte 6 is 1.
619 -* When PB15 is low, the bit 1 of payload byte 6 is 0.
320 +Read:0x(0197)=412    Value:  412 / 10=41.2, So 41.2%
620 620  
621 -(% class="wikigeneratedid" id="H2.3.3.4A0AnalogueDigitalConverter28ADC29" %)
622 -(((
623 -When the digital interrupt pin is set to AT+INTMODx=0, this pin is used as a digital input pin.
624 624  
625 -(% style="color:red" %)**Note:**The maximum voltage input supports 3.6V.
626 -)))
323 +==== (% style="color:#4472c4" %)**Alarm Flag& MOD**(%%) ====
627 627  
628 -==== 2.3.3.4  Analogue Digital Converter (ADC) ====
629 629  
630 -The measuring range of the ADC is only about 0V to 1.1V The voltage resolution is about 0.24mv.
326 +**Example:**
631 631  
632 -When the measured output voltage of the sensor is not within the range of 0V and 1.1V, the output voltage terminal of the sensor shall be divided The example in the following figure is to reduce the output voltage of the sensor by three times If it is necessary to reduce more times, calculate according to the formula in the figure and connect the corresponding resistance in series.
328 +If payload & 0x01 = 0x01  **~-~->** This is an Alarm Message
633 633  
634 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220628150112-1.png?width=285&height=241&rev=1.1||alt="image-20220628150112-1.png" height="241" width="285"]]
330 +If payload & 0x01 = 0x00  **~-~->** This is a normal uplink message, no alarm
635 635  
636 -(% style="color:red" %)**Note:**If the ADC type sensor needs to be powered by SN50_v3, it is recommended to use +5V to control its switch.Only sensors with low power consumption can be powered with VDD.
332 +If payload >> 2 = 0x00  **~-~->**  means MOD=1, This is a sampling uplink message
637 637  
334 +If payload >> 2 = 0x31  **~-~->**  means MOD=31, this message is a reply message for polling, this message contains the alarm settings. see [[this link>>path:#HPolltheAlarmsettings:]] for detail. 
638 638  
639 -==== 2.3.3.5 Digital Interrupt ====
640 640  
641 -Digital Interrupt refers to pin PA8, and there are different trigger methods. When there is a trigger, the SN50v3 will send a packet to the server.
337 +== 2.4 Payload Decoder file ==
642 642  
643 -(% style="color:blue" %)**~ Interrupt connection method:**
644 644  
645 -[[image:image-20230513105351-5.png||height="147" width="485"]]
340 +In TTN, use can add a custom payload so it shows friendly reading
646 646  
647 -(% style="color:blue" %)**Example to use with door sensor :**
342 +In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from:
648 648  
649 -The door sensor is shown at right. It is a two wire magnetic contact switch used for detecting the open/close status of doors or windows.
344 +[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/LSN50v2-S31%26S31B >>https://github.com/dragino/dragino-end-node-decoder/tree/main/LSN50v2-S31%26S31B]]
650 650  
651 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379210849-860.png?rev=1.1||alt="1656379210849-860.png"]]
652 652  
653 -When the two pieces are close to each other, the 2 wire output will be short or open (depending on the type), while if the two pieces are away from each other, the 2 wire output will be the opposite status. So we can use SN50_v3 interrupt interface to detect the status for the door or window.
347 +== 2.5 Datalog Feature ==
654 654  
655 -(% style="color:blue" %)**~ Below is the installation example:**
656 656  
657 -Fix one piece of the magnetic sensor to the door and connect the two pins to SN50_v3 as follows:
350 +Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, S31x-LB will store the reading for future retrieving purposes.
658 658  
659 -* (((
660 -One pin to SN50_v3's PA8 pin
661 -)))
662 -* (((
663 -The other pin to SN50_v3's VDD pin
664 -)))
665 665  
666 -Install the other piece to the door. Find a place where the two pieces will be close to each other when the door is closed. For this particular magnetic sensor, when the door is closed, the output will be short, and PA8 will be at the VCC voltage.
353 +=== 2.5.1 Ways to get datalog via LoRaWAN ===
667 667  
668 -Door sensors have two types: ** NC (Normal close)** and **NO (normal open)**. The connection for both type sensors are the same. But the decoding for payload are reverse, user need to modify this in the IoT Server decoder.
669 669  
670 -When door sensor is shorted, there will extra power consumption in the circuit, the extra current is 3v3/R14 = 3v3/1Mohm = 3uA which can be ignored.
356 +Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayloadA028FPORT3D329"]], S31x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
671 671  
672 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379283019-229.png?rev=1.1||alt="1656379283019-229.png"]]
358 +* a) S31x-LB will do an ACK check for data records sending to make sure every data arrive server.
359 +* b) S31x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB gets a ACK, S31x-LB will consider there is a network connection and resend all NONE-ACK messages.
673 673  
674 -The above photos shows the two parts of the magnetic switch fitted to a door.
361 +Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
675 675  
676 -The software by default uses the falling edge on the signal line as an interrupt. We need to modify it to accept both the rising edge (0v ~-~-> VCC , door close) and the falling edge (VCC ~-~-> 0v , door open) as the interrupt.
363 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
677 677  
678 -The command is:
365 +=== 2.5.2 Unix TimeStamp ===
679 679  
680 -(% style="color:blue" %)**AT+INTMOD1=1   ** (%%) ~/~/(more info about INMOD please refer** **[[**AT Command Manual**>>url:http://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/&file=DRAGINO_LSN50_AT_Commands_v1.5.1.pdf]]**. **)
681 681  
682 -Below shows some screen captures in TTN V3:
368 +S31x-LB uses Unix TimeStamp format based on
683 683  
684 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379339508-835.png?rev=1.1||alt="1656379339508-835.png"]]
370 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
685 685  
686 -In MOD=1, user can use byte 6 to see the status for door open or close. TTN V3 decoder is as below:
372 +User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
687 687  
688 -door= (bytes[6] & 0x80)? "CLOSE":"OPEN";
374 +Below is the converter example
689 689  
376 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="图片-20220523001219-12.png" height="298" width="720"]]
690 690  
691 -==== 2.3.3.6 I2C Interface (SHT20 & SHT31) ====
378 +So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
692 692  
693 -The SDA and SCK are I2C interface lines. You can use these to connect to an I2C device and get the sensor data.
694 694  
695 -We have made an example to show how to use the I2C interface to connect to the SHT20/ SHT31 Temperature and Humidity Sensor.
381 +=== 2.5.3 Set Device Time ===
696 696  
697 -Notice: Different I2C sensors have different I2C commands set and initiate process, if user want to use other I2C sensors, User need to re-write the source code to support those sensors. SHT20/ SHT31 code in SN50_v3 will be a good reference.
698 698  
699 -Below is the connection to SHT20/ SHT31. The connection is as below:
384 +User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
700 700  
386 +Once S31x-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to S31x-LB. If S31x-LB fails to get the time from the server, S31x-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
701 701  
702 -[[image:image-20230513103633-3.png||height="448" width="716"]]
388 +(% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
703 703  
704 -The device will be able to get the I2C sensor data now and upload to IoT Server.
705 705  
706 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379664142-345.png?rev=1.1||alt="1656379664142-345.png"]]
391 +=== 2.5.4 Datalog Uplink payload (FPORT~=3) ===
707 707  
708 -Convert the read byte to decimal and divide it by ten.
709 709  
710 -**Example:**
394 +The Datalog uplinks will use below payload format.
711 711  
712 -Temperature:  Read:0116(H) = 278(D)  Value:  278 /10=27.8℃;
396 +**Retrieval data payload:**
713 713  
714 -Humidity:    Read:0248(H)=584(D)  Value:  584 / 10=58.4, So 58.4%
398 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
399 +|=(% style="width: 80px;background-color:#D9E2F3" %)(((
400 +**Size(bytes)**
401 +)))|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 120px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 103px; background-color: rgb(217, 226, 243);" %)**1**|=(% style="width: 85px; background-color: rgb(217, 226, 243);" %)**4**
402 +|(% style="width:103px" %)**Value**|(% style="width:54px" %)(((
403 +[[Temp_Black>>||anchor="HTemperatureBlack:"]]
404 +)))|(% style="width:51px" %)[[Temp_White>>||anchor="HTemperatureWhite:"]]|(% style="width:89px" %)[[Temp_ Red or Temp _White>>||anchor="HTemperatureREDorTemperatureWhite:"]]|(% style="width:103px" %)Poll message flag & Ext|(% style="width:54px" %)[[Unix Time Stamp>>||anchor="H2.5.2UnixTimeStamp"]]
715 715  
716 -If you want to use other I2C device, please refer the SHT20 part source code as reference.
406 +**Poll message flag & Ext:**
717 717  
408 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20221006192726-1.png?width=754&height=112&rev=1.1||alt="图片-20221006192726-1.png" height="112" width="754"]]
718 718  
719 -==== 2.3.3.7  ​Distance Reading ====
410 +**No ACK Message**:  1: This message means this payload is fromn Uplink Message which doesn't get ACK from the server before ( for **PNACKMD=1** feature)
720 720  
721 -Refer [[Ultrasonic Sensor section>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.8UltrasonicSensor]].
412 +**Poll Message Flag**: 1: This message is a poll message reply.
722 722  
414 +* Poll Message Flag is set to 1.
723 723  
724 -==== 2.3.3.8 Ultrasonic Sensor ====
416 +* Each data entry is 11 bytes, to save airtime and battery, devices will send max bytes according to the current DR and Frequency bands.
725 725  
726 -This Fundamental Principles of this sensor can be found at this link: [[https:~~/~~/wiki.dfrobot.com/Weather_-_proof_Ultrasonic_Sensor_with_Separate_Probe_SKU~~_~~__SEN0208>>url:https://wiki.dfrobot.com/Weather_-_proof_Ultrasonic_Sensor_with_Separate_Probe_SKU___SEN0208]]
418 +For example, in US915 band, the max payload for different DR is:
727 727  
728 -The SN50_v3 detects the pulse width of the sensor and converts it to mm output. The accuracy will be within 1 centimeter. The usable range (the distance between the ultrasonic probe and the measured object) is between 24cm and 600cm.
420 +**a) DR0:** max is 11 bytes so one entry of data
729 729  
730 -The working principle of this sensor is similar to the **HC-SR04** ultrasonic sensor.
422 +**b) DR1:** max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
731 731  
732 -The picture below shows the connection:
424 +**c) DR2:** total payload includes 11 entries of data
733 733  
734 -[[image:image-20230512173903-6.png||height="596" width="715"]]
426 +**d) DR3: **total payload includes 22 entries of data.
735 735  
736 -Connect to the SN50_v3 and run **AT+MOD=2** to switch to ultrasonic mode (ULT).
428 +If devise doesn't have any data in the polling time. Device will uplink 11 bytes of 0   
737 737  
738 -The ultrasonic sensor uses the 8^^th^^ and 9^^th^^ byte for the measurement value.
739 739  
740 740  **Example:**
741 741  
742 -Distance:  Read: 0C2D(Hex) = 3117(D)  Value:  3117 mm=311.7 cm
433 +If S31x-LB has below data inside Flash:
743 743  
435 +[[image:1682646494051-944.png]]
744 744  
437 +If user sends below downlink command: 3160065F9760066DA705
745 745  
746 -==== 2.3.3.9  Battery Output - BAT pin ====
439 +Where : Start time: 60065F97 = time 21/1/19 04:27:03
747 747  
748 -The BAT pin of SN50v3 is connected to the Battery directly. If users want to use BAT pin to power an external sensor. User need to make sure the external sensor is of low power consumption. Because the BAT pin is always open. If the external sensor is of high power consumption. the battery of SN50v3-LB will run out very soon.
441 + Stop time: 60066DA7= time 21/1/19 05:27:03
749 749  
750 750  
751 -==== 2.3.3.10  +5V Output ====
444 +**S31x-LB will uplink this payload.**
752 752  
753 -SN50v3 will enable +5V output before all sampling and disable the +5v after all sampling. 
446 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-13.png?width=727&height=421&rev=1.1||alt="图片-20220523001219-13.png" height="421" width="727"]]
754 754  
755 -The 5V output time can be controlled by AT Command.
448 +(((
449 +__**7FFF089801464160065F97**__ **__7FFF__ __088E__ __014B__ __41__ __60066009__** 7FFF0885014E41600660667FFF0875015141600662BE7FFF086B015541600665167FFF08660155416006676E7FFF085F015A41600669C67FFF0857015D4160066C1E
450 +)))
756 756  
757 -(% style="color:blue" %)**AT+5VT=1000**
452 +(((
453 +Where the first 11 bytes is for the first entry:
454 +)))
758 758  
759 -Means set 5V valid time to have 1000ms. So the real 5V output will actually have 1000ms + sampling time for other sensors.
456 +(((
457 +7FFF089801464160065F97
458 +)))
760 760  
761 -By default the AT+5VT=500. If the external sensor which require 5v and require more time to get stable state, user can use this command to increase the power ON duration for this sensor.
460 +(((
461 +**Ext sensor data**=0x7FFF/100=327.67
462 +)))
762 762  
464 +(((
465 +**Temp**=0x088E/100=22.00
466 +)))
763 763  
468 +(((
469 +**Hum**=0x014B/10=32.6
470 +)))
764 764  
765 -==== 2.3.3.11  BH1750 Illumination Sensor ====
472 +(((
473 +**poll message flag & Ext**=0x41,means reply data,Ext=1
474 +)))
766 766  
767 -MOD=1 support this sensor. The sensor value is in the 8^^th^^ and 9^^th^^ bytes.
476 +(((
477 +**Unix time** is 0x60066009=1611030423s=21/1/19 04:27:03
478 +)))
768 768  
769 -[[image:image-20230512172447-4.png||height="416" width="712"]]
770 770  
771 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220628110012-12.png?rev=1.1||alt="image-20220628110012-12.png" height="361" width="953"]]
481 +(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的
772 772  
483 +== 2.6 Temperature Alarm Feature ==
773 773  
774 -==== 2.3.3.12  Working MOD ====
775 775  
776 -The working MOD info is contained in the Digital in & Digital Interrupt byte (7^^th^^ Byte).
486 +S31x-LB work flow with Alarm feature.
777 777  
778 -User can use the 3^^rd^^ ~~ 7^^th^^  bit of this byte to see the working mod:
779 779  
780 -Case 7^^th^^ Byte >> 2 & 0x1f:
489 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/image-20220623090437-1.png?rev=1.1||alt="图片-20220623090437-1.png"]]
781 781  
782 -* 0: MOD1
783 -* 1: MOD2
784 -* 2: MOD3
785 -* 3: MOD4
786 -* 4: MOD5
787 -* 5: MOD6
788 -* 6: MOD7
789 -* 7: MOD8
790 -* 8: MOD9
791 791  
492 +== 2.7 Frequency Plans ==
792 792  
793 793  
794 -== 2.4 Payload Decoder file ==
495 +The S31x-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
795 795  
796 -
797 -In TTN, use can add a custom payload so it shows friendly reading
798 -
799 -In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from:
800 -
801 -[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/SN50_v3-LB>>https://github.com/dragino/dragino-end-node-decoder/tree/main/SN50_v3-LB]]
802 -
803 -
804 -
805 -== 2.5 Frequency Plans ==
806 -
807 -
808 -The SN50v3-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
809 -
810 810  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
811 811  
812 812  
813 -= 3. Configure SN50v3-LB =
500 += 3. Configure S31x-LB =
814 814  
815 815  == 3.1 Configure Methods ==
816 816  
817 817  
818 -SN50v3-LB supports below configure method:
505 +S31x-LB supports below configure method:
819 819  
820 820  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
821 821  * AT Command via UART Connection : See [[UART Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
... ... @@ -834,7 +834,7 @@
834 834  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
835 835  
836 836  
837 -== 3.3 Commands special design for SN50v3-LB ==
524 +== 3.3 Commands special design for S31x-LB ==
838 838  
839 839  
840 840  These commands only valid for S31x-LB, as below:
... ... @@ -842,6 +842,7 @@
842 842  
843 843  === 3.3.1 Set Transmit Interval Time ===
844 844  
532 +
845 845  Feature: Change LoRaWAN End Node Transmit Interval.
846 846  
847 847  (% style="color:blue" %)**AT Command: AT+TDC**
... ... @@ -867,165 +867,118 @@
867 867  * Example 1: Downlink Payload: 0100001E  ~/~/  Set Transmit Interval (TDC) = 30 seconds
868 868  * Example 2: Downlink Payload: 0100003C  ~/~/  Set Transmit Interval (TDC) = 60 seconds
869 869  
870 -
871 -
872 872  === 3.3.2 Get Device Status ===
873 873  
874 -Send a LoRaWAN downlink to ask the device to send its status.
875 875  
561 +Send a LoRaWAN downlink to ask device send Alarm settings.
562 +
876 876  (% style="color:blue" %)**Downlink Payload:  **(%%)0x26 01
877 877  
878 878  Sensor will upload Device Status via FPORT=5. See payload section for detail.
879 879  
880 880  
881 -=== 3.3.3 Set Interrupt Mode ===
568 +=== 3.3.3 Set Temperature Alarm Threshold ===
882 882  
883 -Feature, Set Interrupt mode for GPIO_EXIT.
570 +* (% style="color:blue" %)**AT Command:**
884 884  
885 -(% style="color:blue" %)**AT Command: AT+INTMOD1，AT+INTMOD2，AT+INTMOD3**
572 +(% style="color:#037691" %)**AT+SHTEMP=min,max**
886 886  
887 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
888 -|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
889 -|(% style="width:154px" %)AT+INTMOD1=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
890 -0
891 -OK
892 -the mode is 0 =Disable Interrupt
893 -)))
894 -|(% style="width:154px" %)AT+INTMOD1=2|(% style="width:196px" %)(((
895 -Set Transmit Interval
896 -0. (Disable Interrupt),
897 -~1. (Trigger by rising and falling edge)
898 -2. (Trigger by falling edge)
899 -3. (Trigger by rising edge)
900 -)))|(% style="width:157px" %)OK
901 -|(% style="width:154px" %)AT+INTMOD2=3|(% style="width:196px" %)(((
902 -Set Transmit Interval
574 +* When min=0, and max≠0, Alarm higher than max
575 +* When min≠0, and max=0, Alarm lower than min
576 +* When min≠0 and max≠0, Alarm higher than max or lower than min
903 903  
904 -trigger by rising edge.
905 -)))|(% style="width:157px" %)OK
906 -|(% style="width:154px" %)AT+INTMOD3=0|(% style="width:196px" %)Disable Interrupt|(% style="width:157px" %)OK
578 +Example:
907 907  
908 -(% style="color:blue" %)**Downlink Command: 0x06**
580 + AT+SHTEMP=0,30   ~/~/ Alarm when temperature higher than 30.
909 909  
910 -Format: Command Code (0x06) followed by 3 bytes.
582 +* (% style="color:blue" %)**Downlink Payload:**
911 911  
912 -This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
584 +(% style="color:#037691" %)**0x(0C 01 00 1E)**  (%%) ~/~/ Set AT+SHTEMP=0,30
913 913  
914 -* Example 1: Downlink Payload: 06000000  **~-~-->**  AT+INTMOD1=0
915 -* Example 2: Downlink Payload: 06000003  **~-~-->**  AT+INTMOD1=3
916 -* Example 3: Downlink Payload: 06000102  **~-~-->**  AT+INTMOD2=2
917 -* Example 4: Downlink Payload: 06000201  **~-~-->**  AT+INTMOD3=1
586 +(% style="color:red" %)**(note: 3^^rd^^ byte= 0x00 for low limit(not set), 4^^th^^ byte = 0x1E for high limit: 30)**
918 918  
919 919  
589 +=== 3.3.4 Set Humidity Alarm Threshold ===
920 920  
921 -=== 3.3.4 Set Power Output Duration ===
591 +* (% style="color:blue" %)**AT Command:**
922 922  
923 -Control the output duration 5V . Before each sampling, device will
593 +(% style="color:#037691" %)**AT+SHHUM=min,max**
924 924  
925 -~1. first enable the power output to external sensor,
595 +* When min=0, and max≠0, Alarm higher than max
596 +* When min≠0, and max=0, Alarm lower than min
597 +* When min≠0 and max≠0, Alarm higher than max or lower than min
926 926  
927 -2. keep it on as per duration, read sensor value and construct uplink payload
599 +Example:
928 928  
929 -3. final, close the power output.
601 + AT+SHHUM=70,0  ~/~/ Alarm when humidity lower than 70%.
930 930  
931 -(% style="color:blue" %)**AT Command: AT+5VT**
603 +* (% style="color:blue" %)**Downlink Payload:**
932 932  
933 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
934 -|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
935 -|(% style="width:154px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:157px" %)(((
936 -500(default)
937 -OK
938 -)))
939 -|(% style="width:154px" %)AT+5VT=1000|(% style="width:196px" %)(((
940 -Close after a delay of 1000 milliseconds.
941 -)))|(% style="width:157px" %)OK
605 +(% style="color:#037691" %)**0x(0C 02 46 00)**(%%)  ~/~/ Set AT+SHTHUM=70,0
942 942  
943 -(% style="color:blue" %)**Downlink Command: 0x07**
607 +(% style="color:red" %)**(note: 3^^rd^^ byte= 0x46 for low limit (70%), 4^^th^^ byte = 0x00 for high limit (not set))**
944 944  
945 -Format: Command Code (0x07) followed by 2 bytes.
946 946  
947 -The first and second bytes are the time to turn on.
610 +=== 3.3.5 Set Alarm Interval ===
948 948  
949 -* Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
950 -* Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
612 +The shortest time of two Alarm packet. (unit: min)
951 951  
614 +* (% style="color:blue" %)**AT Command:**
952 952  
616 +(% style="color:#037691" %)**AT+ATDC=30** (%%) ~/~/ The shortest interval of two Alarm packets is 30 minutes, Means is there is an alarm packet uplink, there won't be another one in the next 30 minutes.
953 953  
954 -=== 3.3.5 Set Weighing parameters ===
618 +* (% style="color:blue" %)**Downlink Payload:**
955 955  
956 -Feature: Working mode 5 is effective, weight initialization and weight factor setting of HX711.
620 +(% style="color:#037691" %)**0x(0D 00 1E)**(%%)     **~-~--> ** Set AT+ATDC=0x 00 1E = 30 minutes
957 957  
958 -(% style="color:blue" %)**AT Command: AT+WEIGRE,AT+WEIGAP**
959 959  
960 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
961 -|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
962 -|(% style="width:154px" %)AT+WEIGRE|(% style="width:196px" %)Weight is initialized to 0.|(% style="width:157px" %)OK
963 -|(% style="width:154px" %)AT+WEIGAP=？|(% style="width:196px" %)400.0|(% style="width:157px" %)OK(default)
964 -|(% style="width:154px" %)AT+WEIGAP=400.3|(% style="width:196px" %)Set the factor to 400.3.|(% style="width:157px" %)OK
623 +=== 3.3.6 Get Alarm settings ===
965 965  
966 -(% style="color:blue" %)**Downlink Command: 0x08**
967 967  
968 -Format: Command Code (0x08) followed by 2 bytes or 4 bytes.
626 +Send a LoRaWAN downlink to ask device send Alarm settings.
969 969  
970 -Use AT+WEIGRE when the first byte is 1, only 1 byte. When it is 2, use AT+WEIGAP, there are 3 bytes.
628 +* (% style="color:#037691" %)**Downlink Payload:  **(%%)0x0E 01
971 971  
972 -The second and third bytes are multiplied by 10 times to be the AT+WEIGAP value.
630 +**Example:**
973 973  
974 -* Example 1: Downlink Payload: 0801  **~-~-->**  AT+WEIGRE
975 -* Example 2: Downlink Payload: 08020FA3  **~-~-->**  AT+WEIGAP=400.3
976 -* Example 3: Downlink Payload: 08020FA0  **~-~-->**  AT+WEIGAP=400.0
632 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/1655948182791-225.png?rev=1.1||alt="1655948182791-225.png"]]
977 977  
978 978  
635 +**Explain:**
979 979  
980 -=== 3.3.6 Set Digital pulse count value ===
637 +* Alarm & MOD bit is 0x7C, 0x7C >> 2 = 0x31: Means this message is the Alarm settings message.
981 981  
982 -Feature: Set the pulse count value.
639 +=== 3.3.7 Set Interrupt Mode ===
983 983  
984 -Count 1 is PA8 pin of mode 6 and mode 9. Count 2 is PA4 pin of mode 9.
985 985  
986 -(% style="color:blue" %)**AT Command: AT+SETCNT**
642 +Feature, Set Interrupt mode for GPIO_EXIT.
987 987  
988 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
989 -|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
990 -|(% style="width:154px" %)AT+SETCNT=1,100|(% style="width:196px" %)Initialize the count value 1 to 100.|(% style="width:157px" %)OK
991 -|(% style="width:154px" %)AT+SETCNT=2,0|(% style="width:196px" %)Initialize the count value 2 to 0.|(% style="width:157px" %)OK
644 +(% style="color:blue" %)**AT Command: AT+INTMOD**
992 992  
993 -(% style="color:blue" %)**Downlink Command: 0x09**
994 -
995 -Format: Command Code (0x09) followed by 5 bytes.
996 -
997 -The first byte is to select which count value to initialize, and the next four bytes are the count value to be initialized.
998 -
999 -* Example 1: Downlink Payload: 090100000000  **~-~-->**  AT+SETCNT=1,0
1000 -* Example 2: Downlink Payload: 0902000003E8  **~-~-->**  AT+SETCNT=2,1000
1001 -
1002 -
1003 -
1004 -=== 3.3.7 Set Workmode ===
1005 -
1006 -Feature: Switch working mode.
1007 -
1008 -(% style="color:blue" %)**AT Command: AT+MOD**
1009 -
1010 1010  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1011 1011  |=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
1012 -|(% style="width:154px" %)AT+MOD=?|(% style="width:196px" %)Get the current working mode.|(% style="width:157px" %)(((
648 +|(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
649 +0
1013 1013  OK
651 +the mode is 0 =Disable Interrupt
1014 1014  )))
1015 -|(% style="width:154px" %)AT+MOD=4|(% style="width:196px" %)Set the working mode to 3DS18B20s.|(% style="width:157px" %)(((
1016 -OK
1017 -Attention:Take effect after ATZ
1018 -)))
653 +|(% style="width:154px" %)AT+INTMOD=2|(% style="width:196px" %)(((
654 +Set Transmit Interval
655 +0. (Disable Interrupt),
656 +~1. (Trigger by rising and falling edge)
657 +2. (Trigger by falling edge)
658 +3. (Trigger by rising edge)
659 +)))|(% style="width:157px" %)OK
1019 1019  
1020 -(% style="color:blue" %)**Downlink Command: 0x0A**
661 +(% style="color:blue" %)**Downlink Command: 0x06**
1021 1021  
1022 -Format: Command Code (0x0A) followed by 1 bytes.
663 +Format: Command Code (0x06) followed by 3 bytes.
1023 1023  
1024 -* Example 1: Downlink Payload: 0A01  **~-~-->**  AT+MOD=1
1025 -* Example 2: Downlink Payload: 0A04  **~-~-->**  AT+MOD=4
665 +This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
1026 1026  
667 +* Example 1: Downlink Payload: 06000000  ~/~/  Turn off interrupt mode
668 +* Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
1027 1027  
1028 -
1029 1029  = 4. Battery & Power Consumption =
1030 1030  
1031 1031  
... ... @@ -1054,10 +1054,7 @@
1054 1054  
1055 1055  = 6. FAQ =
1056 1056  
1057 -== 6.1 Where can i find source code of SN50v3-LB? ==
1058 1058  
1059 -* **[[Hardware Source Files>>https://github.com/dragino/Lora/tree/master/LSN50/v3.0]].**
1060 -* **[[Software Source Code & Compile instruction>>https://github.com/dragino/SN50v3]].**
1061 1061  
1062 1062  = 7. Order Info =
1063 1063  
... ... @@ -1099,5 +1099,4 @@
1099 1099  
1100 1100  
1101 1101  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1102 -
1103 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.cc>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.cc]]
740 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
image-20230512163509-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -1.5 MB
Content
image-20230512164658-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -2.0 MB
Content
image-20230512170701-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -2.5 MB
Content
image-20230512172447-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -2.0 MB
Content
image-20230512173758-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -2.1 MB
Content
image-20230512173903-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -2.3 MB
Content
image-20230512180609-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -2.3 MB
Content
image-20230512180718-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -2.3 MB
Content
image-20230512181814-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -2.2 MB
Content
image-20230513084523-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -611.3 KB
Content
image-20230513102034-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -607.1 KB
Content
image-20230513103633-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -595.5 KB
Content
image-20230513105207-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -384.7 KB
Content
image-20230513105351-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -37.6 KB
Content
image-20230513110214-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -172.7 KB
Content
image-20230513111203-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -79.9 KB
Content
image-20230513111231-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -64.9 KB
Content
image-20230513111255-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -70.4 KB
Content
image-20230513134006-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -1.9 MB
Content
image-20230515135611-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -948.0 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0