<
From version < 43.2 >
edited by Xiaoling
on 2023/05/16 13:39
To version < 43.45 >
edited by Xiaoling
on 2023/05/16 15:37
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -19,21 +19,18 @@
19 19  
20 20  (% style="color:blue" %)**SN50V3-LB **(%%)LoRaWAN Sensor Node is a Long Range LoRa Sensor Node. It is designed for outdoor use and powered by (% style="color:blue" %)** 8500mA Li/SOCl2 battery**(%%) for long term use.SN50V3-LB is designed to facilitate developers to quickly deploy industrial level LoRa and IoT solutions. It help users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to program, create and connect your things everywhere.
21 21  
22 -
23 23  (% style="color:blue" %)**SN50V3-LB wireless part**(%%) is based on SX1262 allows the user to send data and reach extremely long ranges at low data-rates.It provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, and so on.
24 24  
25 -
26 26  (% style="color:blue" %)**SN50V3-LB **(%%)has a powerful 48Mhz ARM microcontroller with 256KB flash and 64KB RAM. It has multiplex I/O pins to connect to different sensors.
27 27  
28 -
29 29  (% style="color:blue" %)**SN50V3-LB**(%%) has a built-in BLE module, user can configure the sensor remotely via Mobile Phone. It also support OTA upgrade via private LoRa protocol for easy maintaining.
30 30  
31 -
32 32  SN50V3-LB is the 3^^rd^^ generation of LSN50 series generic sensor node from Dragino. It is an (% style="color:blue" %)**open source project**(%%) and has a mature LoRaWAN stack and application software. User can use the pre-load software for their IoT projects or easily customize the software for different requirements.
33 33  
34 34  
35 35  == 1.2 ​Features ==
36 36  
33 +
37 37  * LoRaWAN 1.0.3 Class A
38 38  * Ultra-low power consumption
39 39  * Open-Source hardware/software
... ... @@ -44,8 +44,11 @@
44 44  * Downlink to change configure
45 45  * 8500mAh Battery for long term use
46 46  
44 +
45 +
47 47  == 1.3 Specification ==
48 48  
48 +
49 49  (% style="color:#037691" %)**Common DC Characteristics:**
50 50  
51 51  * Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
... ... @@ -80,8 +80,11 @@
80 80  * Sleep Mode: 5uA @ 3.3v
81 81  * LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
82 82  
83 +
84 +
83 83  == 1.4 Sleep mode and working mode ==
84 84  
87 +
85 85  (% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
86 86  
87 87  (% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
... ... @@ -106,6 +106,8 @@
106 106  )))
107 107  |(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
108 108  
112 +
113 +
109 109  == 1.6 BLE connection ==
110 110  
111 111  
... ... @@ -139,6 +139,7 @@
139 139  
140 140  == Hole Option ==
141 141  
147 +
142 142  SN50v3-LB has different hole size options for different size sensor cable. The options provided are M12, M16 and M20. The definition is as below:
143 143  
144 144  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220627104757-1.png?rev=1.1||alt="image-20220627104757-1.png"]]
... ... @@ -290,92 +290,74 @@
290 290  1. All modes share the same Payload Explanation from HERE.
291 291  1. By default, the device will send an uplink message every 20 minutes.
292 292  
299 +
300 +
293 293  ==== 2.3.2.1  MOD~=1 (Default Mode) ====
294 294  
303 +
295 295  In this mode, uplink payload includes in total 11 bytes. Uplink packets use FPORT=2.
296 296  
297 -(% style="width:1110px" %)
298 -|**Size(bytes)**|**2**|(% style="width:191px" %)**2**|(% style="width:78px" %)**2**|(% style="width:216px" %)**1**|(% style="width:308px" %)**2**|(% style="width:154px" %)**2**
306 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
307 +|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:20px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:90px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:130px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:90px" %)**2**
299 299  |**Value**|Bat|(% style="width:191px" %)(((
300 -Temperature(DS18B20)
301 -
302 -(PC13)
309 +Temperature(DS18B20)(PC13)
303 303  )))|(% style="width:78px" %)(((
304 -ADC
305 -
306 -(PA4)
311 +ADC(PA4)
307 307  )))|(% style="width:216px" %)(((
308 -Digital in(PB15) &
309 -
310 -Digital Interrupt(PA8)
311 -
312 -
313 +Digital in(PB15)&Digital Interrupt(PA8)
313 313  )))|(% style="width:308px" %)(((
314 -Temperature
315 -
316 -(SHT20 or SHT31 or BH1750 Illumination Sensor)
315 +Temperature(SHT20 or SHT31 or BH1750 Illumination Sensor)
317 317  )))|(% style="width:154px" %)(((
318 -Humidity
319 -
320 -(SHT20 or SHT31)
317 +Humidity(SHT20 or SHT31)
321 321  )))
322 322  
323 323  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220627150949-6.png?rev=1.1||alt="image-20220627150949-6.png"]]
324 324  
325 325  
323 +
326 326  ==== 2.3.2.2  MOD~=2 (Distance Mode) ====
327 327  
326 +
328 328  This mode is target to measure the distance. The payload of this mode is totally 11 bytes. The 8^^th^^ and 9^^th^^ bytes is for the distance.
329 329  
330 -(% style="width:1011px" %)
331 -|**Size(bytes)**|**2**|(% style="width:196px" %)**2**|(% style="width:87px" %)**2**|(% style="width:189px" %)**1**|(% style="width:208px" %)**2**|(% style="width:117px" %)**2**
329 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
330 +|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:110px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:110px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:140px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**2**
332 332  |**Value**|BAT|(% style="width:196px" %)(((
333 -Temperature(DS18B20)
334 -
335 -(PC13)
332 +Temperature(DS18B20)(PC13)
336 336  )))|(% style="width:87px" %)(((
337 -ADC
338 -
339 -(PA4)
334 +ADC(PA4)
340 340  )))|(% style="width:189px" %)(((
341 -Digital in(PB15) &
342 -
343 -Digital Interrupt(PA8)
336 +Digital in(PB15) & Digital Interrupt(PA8)
344 344  )))|(% style="width:208px" %)(((
345 -Distance measure by:
346 -1) LIDAR-Lite V3HP
347 -Or
348 -2) Ultrasonic Sensor
338 +Distance measure by:1) LIDAR-Lite V3HP
339 +Or 2) Ultrasonic Sensor
349 349  )))|(% style="width:117px" %)Reserved
350 350  
351 351  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656324539647-568.png?rev=1.1||alt="1656324539647-568.png"]]
352 352  
353 -**Connection of LIDAR-Lite V3HP:**
354 354  
345 +(% style="color:blue" %)**Connection of LIDAR-Lite V3HP:**
346 +
355 355  [[image:image-20230512173758-5.png||height="563" width="712"]]
356 356  
357 -**Connection to Ultrasonic Sensor:**
358 358  
350 +(% style="color:blue" %)**Connection to Ultrasonic Sensor:**
351 +
359 359  Need to remove R1 and R2 resistors to get low power,otherwise there will be 240uA standby current.
360 360  
361 361  [[image:image-20230512173903-6.png||height="596" width="715"]]
362 362  
356 +
363 363  For the connection to TF-Mini or TF-Luna , MOD2 payload is as below:
364 364  
365 -(% style="width:1113px" %)
366 -|**Size(bytes)**|**2**|(% style="width:183px" %)**2**|(% style="width:173px" %)**1**|(% style="width:84px" %)**2**|(% style="width:323px" %)**2**|(% style="width:188px" %)**2**
359 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
360 +|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:20px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:120px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:80px" %)**2**
367 367  |**Value**|BAT|(% style="width:183px" %)(((
368 -Temperature(DS18B20)
369 -
370 -(PC13)
362 +Temperature(DS18B20)(PC13)
371 371  )))|(% style="width:173px" %)(((
372 -Digital in(PB15) &
373 -
374 -Digital Interrupt(PA8)
364 +Digital in(PB15) & Digital Interrupt(PA8)
375 375  )))|(% style="width:84px" %)(((
376 -ADC
377 -
378 -(PA4)
366 +ADC(PA4)
379 379  )))|(% style="width:323px" %)(((
380 380  Distance measure by:1)TF-Mini plus LiDAR
381 381  Or 
... ... @@ -384,6 +384,7 @@
384 384  
385 385  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656376779088-686.png?rev=1.1||alt="1656376779088-686.png"]]
386 386  
375 +
387 387  **Connection to [[TF-Mini plus>>url:http://en.benewake.com/product/detail/5c345cd0e5b3a844c472329b.html]] LiDAR(UART version):**
388 388  
389 389  Need to remove R3 and R4 resistors to get low power,otherwise there will be 400uA standby current.
... ... @@ -390,6 +390,7 @@
390 390  
391 391  [[image:image-20230512180609-7.png||height="555" width="802"]]
392 392  
382 +
393 393  **Connection to [[TF-Luna>>url:http://en.benewake.com/product/detail/5e1c1fd04d839408076b6255.html]] LiDAR (UART version):**
394 394  
395 395  Need to remove R3 and R4 resistors to get low power,otherwise there will be 400uA standby current.
... ... @@ -399,34 +399,25 @@
399 399  
400 400  ==== 2.3.2.3  MOD~=3 (3 ADC + I2C) ====
401 401  
392 +
402 402  This mode has total 12 bytes. Include 3 x ADC + 1x I2C
403 403  
404 -(% style="width:1031px" %)
405 -|=(((
395 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
396 +|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
406 406  **Size(bytes)**
407 -)))|=(% style="width: 68px;" %)**2**|=(% style="width: 75px;" %)**2**|=**2**|=**1**|=(% style="width: 304px;" %)2|=(% style="width: 163px;" %)2|=(% style="width: 53px;" %)1
398 +)))|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 140px;background-color:#D9E2F3;color:#0070C0" %)2|=(% style="width: 120px;background-color:#D9E2F3;color:#0070C0" %)2|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)1
408 408  |**Value**|(% style="width:68px" %)(((
409 -ADC1
410 -
411 -(PA4)
400 +ADC1(PA4)
412 412  )))|(% style="width:75px" %)(((
413 -ADC2
414 -
415 -(PA5)
402 +ADC2(PA5)
416 416  )))|(((
417 -ADC3
418 -
419 -(PA8)
404 +ADC3(PA8)
420 420  )))|(((
421 421  Digital Interrupt(PB15)
422 422  )))|(% style="width:304px" %)(((
423 -Temperature
424 -
425 -(SHT20 or SHT31 or BH1750 Illumination Sensor)
408 +Temperature(SHT20 or SHT31 or BH1750 Illumination Sensor)
426 426  )))|(% style="width:163px" %)(((
427 -Humidity
428 -
429 -(SHT20 or SHT31)
410 +Humidity(SHT20 or SHT31)
430 430  )))|(% style="width:53px" %)Bat
431 431  
432 432  [[image:image-20230513110214-6.png]]
... ... @@ -437,22 +437,16 @@
437 437  
438 438  This mode has total 11 bytes. As shown below:
439 439  
440 -(% style="width:1017px" %)
441 -|**Size(bytes)**|**2**|(% style="width:186px" %)**2**|(% style="width:82px" %)**2**|(% style="width:210px" %)**1**|(% style="width:191px" %)**2**|(% style="width:183px" %)**2**
421 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
422 +|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:20px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**
442 442  |**Value**|BAT|(% style="width:186px" %)(((
443 -Temperature1(DS18B20)
444 -(PC13)
424 +Temperature1(DS18B20)(PC13)
445 445  )))|(% style="width:82px" %)(((
446 -ADC
447 -
448 -(PA4)
426 +ADC(PA4)
449 449  )))|(% style="width:210px" %)(((
450 -Digital in(PB15) &
451 -
452 -Digital Interrupt(PA8) 
428 +Digital in(PB15) & Digital Interrupt(PA8) 
453 453  )))|(% style="width:191px" %)Temperature2(DS18B20)
454 -(PB9)|(% style="width:183px" %)Temperature3(DS18B20)
455 -(PB8)
430 +(PB9)|(% style="width:183px" %)Temperature3(DS18B20)(PB8)
456 456  
457 457  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656377606181-607.png?rev=1.1||alt="1656377606181-607.png"]]
458 458  
... ... @@ -459,8 +459,10 @@
459 459  [[image:image-20230513134006-1.png||height="559" width="736"]]
460 460  
461 461  
437 +
462 462  ==== 2.3.2.5  MOD~=5(Weight Measurement by HX711) ====
463 463  
440 +
464 464  [[image:image-20230512164658-2.png||height="532" width="729"]]
465 465  
466 466  Each HX711 need to be calibrated before used. User need to do below two steps:
... ... @@ -479,23 +479,17 @@
479 479  
480 480  Check the response of this command and adjust the value to match the real value for thing.
481 481  
482 -(% style="width:767px" %)
483 -|=(((
459 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
460 +|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
484 484  **Size(bytes)**
485 -)))|=**2**|=(% style="width: 193px;" %)**2**|=(% style="width: 85px;" %)**2**|=(% style="width: 186px;" %)**1**|=(% style="width: 100px;" %)**4**
462 +)))|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 150px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 200px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**4**
486 486  |**Value**|BAT|(% style="width:193px" %)(((
487 487  Temperature(DS18B20)
488 -
489 489  (PC13)
490 -
491 -
492 492  )))|(% style="width:85px" %)(((
493 -ADC
494 -
495 -(PA4)
467 +ADC(PA4)
496 496  )))|(% style="width:186px" %)(((
497 497  Digital in(PB15) &
498 -
499 499  Digital Interrupt(PA8)
500 500  )))|(% style="width:100px" %)Weight
501 501  
... ... @@ -502,8 +502,10 @@
502 502  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220820120036-2.png?width=1003&height=469&rev=1.1||alt="image-20220820120036-2.png" height="469" width="1003"]]
503 503  
504 504  
476 +
505 505  ==== 2.3.2.6  MOD~=6 (Counting Mode) ====
506 506  
479 +
507 507  In this mode, the device will work in counting mode. It counts the interrupt on the interrupt pins and sends the count on TDC time.
508 508  
509 509  Connection is as below. The PIR sensor is a count sensor, it will generate interrupt when people come close or go away. User can replace the PIR sensor with other counting sensors.
... ... @@ -510,45 +510,36 @@
510 510  
511 511  [[image:image-20230512181814-9.png||height="543" width="697"]]
512 512  
513 -**Note:** LoRaWAN wireless transmission will infect the PIR sensor. Which cause the counting value increase +1 for every uplink. User can change PIR sensor or put sensor away of the SN50_v3 to avoid this happen.
486 +(% style="color:red" %)**Note:** **LoRaWAN wireless transmission will infect the PIR sensor. Which cause the counting value increase +1 for every uplink. User can change PIR sensor or put sensor away of the SN50_v3 to avoid this happen.**
514 514  
515 -(% style="width:961px" %)
516 -|=**Size(bytes)**|=**2**|=(% style="width: 256px;" %)**2**|=(% style="width: 108px;" %)**2**|=(% style="width: 126px;" %)**1**|=(% style="width: 145px;" %)**4**
488 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
489 +|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**Size(bytes)**|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 220px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 80px;background-color:#D9E2F3;color:#0070C0" %)**4**
517 517  |**Value**|BAT|(% style="width:256px" %)(((
518 -Temperature(DS18B20)
519 -
520 -(PC13)
491 +Temperature(DS18B20)(PC13)
521 521  )))|(% style="width:108px" %)(((
522 -ADC
523 -
524 -(PA4)
493 +ADC(PA4)
525 525  )))|(% style="width:126px" %)(((
526 -Digital in
527 -
528 -(PB15)
495 +Digital in(PB15)
529 529  )))|(% style="width:145px" %)(((
530 -Count
531 -
532 -(PA8)
497 +Count(PA8)
533 533  )))
534 534  
535 535  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656378441509-171.png?rev=1.1||alt="1656378441509-171.png"]]
536 536  
537 537  
503 +
538 538  ==== 2.3.2.7  MOD~=7 (Three interrupt contact modes) ====
539 539  
540 -(% style="width:1108px" %)
541 -|=(((
506 +
507 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
508 +|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
542 542  **Size(bytes)**
543 -)))|=**2**|=(% style="width: 188px;" %)**2**|=(% style="width: 83px;" %)**2**|=(% style="width: 184px;" %)**1**|=(% style="width: 186px;" %)**1**|=(% style="width: 197px;" %)1|=(% style="width: 100px;" %)2
510 +)))|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)1|=(% style="width: 40px;background-color:#D9E2F3;color:#0070C0" %)2
544 544  |**Value**|BAT|(% style="width:188px" %)(((
545 545  Temperature(DS18B20)
546 -
547 547  (PC13)
548 548  )))|(% style="width:83px" %)(((
549 -ADC
550 -
551 -(PA5)
515 +ADC(PA5)
552 552  )))|(% style="width:184px" %)(((
553 553  Digital Interrupt1(PA8)
554 554  )))|(% style="width:186px" %)Digital Interrupt2(PA4)|(% style="width:197px" %)Digital Interrupt3(PB15)|(% style="width:100px" %)Reserved
... ... @@ -555,30 +555,25 @@
555 555  
556 556  [[image:image-20230513111203-7.png||height="324" width="975"]]
557 557  
522 +
558 558  ==== 2.3.2.8  MOD~=8 (3ADC+1DS18B20) ====
559 559  
560 -(% style="width:922px" %)
561 -|=(((
525 +
526 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
527 +|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
562 562  **Size(bytes)**
563 -)))|=**2**|=(% style="width: 207px;" %)**2**|=(% style="width: 94px;" %)**2**|=(% style="width: 198px;" %)**1**|=(% style="width: 84px;" %)**2**|=(% style="width: 82px;" %)2
529 +)))|=(% style="width: 30px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 120px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 70px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 120px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 70px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 70px;background-color:#D9E2F3;color:#0070C0" %)2
564 564  |**Value**|BAT|(% style="width:207px" %)(((
565 565  Temperature(DS18B20)
566 -
567 567  (PC13)
568 568  )))|(% style="width:94px" %)(((
569 -ADC1
570 -
571 -(PA4)
534 +ADC1(PA4)
572 572  )))|(% style="width:198px" %)(((
573 573  Digital Interrupt(PB15)
574 574  )))|(% style="width:84px" %)(((
575 -ADC2
576 -
577 -(PA5)
538 +ADC2(PA5)
578 578  )))|(% style="width:82px" %)(((
579 -ADC3
580 -
581 -(PA8)
540 +ADC3(PA8)
582 582  )))
583 583  
584 584  [[image:image-20230513111231-8.png||height="335" width="900"]]
... ... @@ -586,56 +586,50 @@
586 586  
587 587  ==== 2.3.2.9  MOD~=9 (3DS18B20+ two Interrupt count mode) ====
588 588  
589 -(% style="width:1010px" %)
590 -|=(((
548 +
549 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
550 +|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
591 591  **Size(bytes)**
592 -)))|=**2**|=**2**|=**2**|=**1**|=(% style="width: 193px;" %)**2**|=(% style="width: 78px;" %)4|=(% style="width: 78px;" %)4
552 +)))|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 80px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)4|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)4
593 593  |**Value**|BAT|(((
594 594  Temperature1(DS18B20)
595 -
596 596  (PC13)
597 597  )))|(((
598 598  Temperature2(DS18B20)
599 -
600 600  (PB9)
601 601  )))|(((
602 602  Digital Interrupt
603 -
604 604  (PB15)
605 605  )))|(% style="width:193px" %)(((
606 606  Temperature3(DS18B20)
607 -
608 608  (PB8)
609 609  )))|(% style="width:78px" %)(((
610 -Count1
611 -
612 -(PA8)
566 +Count1(PA8)
613 613  )))|(% style="width:78px" %)(((
614 -Count2
615 -
616 -(PA4)
568 +Count2(PA4)
617 617  )))
618 618  
619 619  [[image:image-20230513111255-9.png||height="341" width="899"]]
620 620  
621 -**The newly added AT command is issued correspondingly:**
573 +(% style="color:blue" %)**The newly added AT command is issued correspondingly:**
622 622  
623 -**~ AT+INTMOD1** ** PA8**  pin:  Corresponding downlink:  **06 00 00 xx**
575 +(% style="color:#037691" %)** AT+INTMOD1 PA8**(%%)  pin:  Corresponding downlink:  (% style="color:#037691" %)**06 00 00 xx**
624 624  
625 -**~ AT+INTMOD2**  **PA4**  pin:  Corresponding downlink:**  06 00 01 xx**
577 +(% style="color:#037691" %)** AT+INTMOD2 PA4**(%%)  pin:  Corresponding downlink: (% style="color:#037691" %)**06 00 01 xx**
626 626  
627 -**~ AT+INTMOD3**  **PB15**  pin:  Corresponding downlink:  ** 06 00 02 xx**
579 +(% style="color:#037691" %)** AT+INTMOD3 PB15**(%%)  pin:  Corresponding downlink:  (% style="color:#037691" %)** 06 00 02 xx**
628 628  
629 -**AT+SETCNT=aa,bb** 
630 630  
582 +(% style="color:blue" %)**AT+SETCNT=aa,bb** 
583 +
631 631  When AA is 1, set the count of PA8 pin to BB Corresponding downlink:09 01 bb bb bb bb
632 632  
633 633  When AA is 2, set the count of PA4 pin to BB Corresponding downlink:09 02 bb bb bb bb
634 634  
635 635  
636 -
637 637  === 2.3.3  ​Decode payload ===
638 638  
591 +
639 639  While using TTN V3 network, you can add the payload format to decode the payload.
640 640  
641 641  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656378466788-734.png?rev=1.1||alt="1656378466788-734.png"]]
... ... @@ -647,6 +647,7 @@
647 647  
648 648  ==== 2.3.3.1 Battery Info ====
649 649  
603 +
650 650  Check the battery voltage for SN50v3.
651 651  
652 652  Ex1: 0x0B45 = 2885mV
... ... @@ -656,15 +656,16 @@
656 656  
657 657  ==== 2.3.3.2  Temperature (DS18B20) ====
658 658  
613 +
659 659  If there is a DS18B20 connected to PC13 pin. The temperature will be uploaded in the payload.
660 660  
661 -More DS18B20 can check the [[3 DS18B20 mode>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#2.3.4MOD3D4283xDS18B2029]]
616 +More DS18B20 can check the [[3 DS18B20 mode>>||anchor="H2.3.2.4MOD3D4283xDS18B2029"]]
662 662  
663 -**Connection:**
618 +(% style="color:blue" %)**Connection:**
664 664  
665 665  [[image:image-20230512180718-8.png||height="538" width="647"]]
666 666  
667 -**Example**:
622 +(% style="color:blue" %)**Example**:
668 668  
669 669  If payload is: 0105H:  (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
670 670  
... ... @@ -684,9 +684,7 @@
684 684  (((
685 685  When the digital interrupt pin is set to AT+INTMODx=0, this pin is used as a digital input pin.
686 686  
687 -**Note:**The maximum voltage input supports 3.6V.
688 -
689 -
642 +(% style="color:red" %)**Note:**The maximum voltage input supports 3.6V.
690 690  )))
691 691  
692 692  ==== 2.3.3.4  Analogue Digital Converter (ADC) ====
... ... @@ -697,7 +697,7 @@
697 697  
698 698  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220628150112-1.png?width=285&height=241&rev=1.1||alt="image-20220628150112-1.png" height="241" width="285"]]
699 699  
700 -**Note:**If the ADC type sensor needs to be powered by SN50_v3, it is recommended to use +5V to control its switch.Only sensors with low power consumption can be powered with VDD.
653 +(% style="color:red" %)**Note:**If the ADC type sensor needs to be powered by SN50_v3, it is recommended to use +5V to control its switch.Only sensors with low power consumption can be powered with VDD.
701 701  
702 702  
703 703  ==== 2.3.3.5 Digital Interrupt ====
... ... @@ -704,11 +704,11 @@
704 704  
705 705  Digital Interrupt refers to pin PA8, and there are different trigger methods. When there is a trigger, the SN50v3 will send a packet to the server.
706 706  
707 -**~ Interrupt connection method:**
660 +(% style="color:blue" %)** Interrupt connection method:**
708 708  
709 709  [[image:image-20230513105351-5.png||height="147" width="485"]]
710 710  
711 -**Example to use with door sensor :**
664 +(% style="color:blue" %)**Example to use with door sensor :**
712 712  
713 713  The door sensor is shown at right. It is a two wire magnetic contact switch used for detecting the open/close status of doors or windows.
714 714  
... ... @@ -716,7 +716,7 @@
716 716  
717 717  When the two pieces are close to each other, the 2 wire output will be short or open (depending on the type), while if the two pieces are away from each other, the 2 wire output will be the opposite status. So we can use SN50_v3 interrupt interface to detect the status for the door or window.
718 718  
719 -**~ Below is the installation example:**
672 +(% style="color:blue" %)** Below is the installation example:**
720 720  
721 721  Fix one piece of the magnetic sensor to the door and connect the two pins to SN50_v3 as follows:
722 722  
... ... @@ -741,7 +741,7 @@
741 741  
742 742  The command is:
743 743  
744 -**AT+INTMOD1=1       **~/~/(more info about INMOD please refer** **[[**AT Command Manual**>>url:http://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/&file=DRAGINO_LSN50_AT_Commands_v1.5.1.pdf]]**. **)
697 +(% style="color:blue" %)**AT+INTMOD1=1   ** (%%) ~/~/(more info about INMOD please refer** **[[**AT Command Manual**>>url:http://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/&file=DRAGINO_LSN50_AT_Commands_v1.5.1.pdf]]**. **)
745 745  
746 746  Below shows some screen captures in TTN V3:
747 747  
... ... @@ -782,7 +782,7 @@
782 782  
783 783  ==== 2.3.3.7  ​Distance Reading ====
784 784  
785 -Refer [[Ultrasonic Sensor section>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.8UltrasonicSensor]].
738 +Refer [[Ultrasonic Sensor section>>||anchor="H2.3.3.8UltrasonicSensor"]].
786 786  
787 787  
788 788  ==== 2.3.3.8 Ultrasonic Sensor ====
... ... @@ -791,13 +791,13 @@
791 791  
792 792  The SN50_v3 detects the pulse width of the sensor and converts it to mm output. The accuracy will be within 1 centimeter. The usable range (the distance between the ultrasonic probe and the measured object) is between 24cm and 600cm.
793 793  
794 -The working principle of this sensor is similar to the **HC-SR04** ultrasonic sensor.
747 +The working principle of this sensor is similar to the (% style="color:blue" %)**HC-SR04**(%%) ultrasonic sensor.
795 795  
796 796  The picture below shows the connection:
797 797  
798 798  [[image:image-20230512173903-6.png||height="596" width="715"]]
799 799  
800 -Connect to the SN50_v3 and run **AT+MOD=2** to switch to ultrasonic mode (ULT).
753 +Connect to the SN50_v3 and run (% style="color:blue" %)**AT+MOD=2**(%%) to switch to ultrasonic mode (ULT).
801 801  
802 802  The ultrasonic sensor uses the 8^^th^^ and 9^^th^^ byte for the measurement value.
803 803  
... ... @@ -818,7 +818,7 @@
818 818  
819 819  The 5V output time can be controlled by AT Command.
820 820  
821 -**AT+5VT=1000**
774 +(% style="color:blue" %)**AT+5VT=1000**
822 822  
823 823  Means set 5V valid time to have 1000ms. So the real 5V output will actually have 1000ms + sampling time for other sensors.
824 824  
... ... @@ -853,7 +853,6 @@
853 853  * 7: MOD8
854 854  * 8: MOD9
855 855  
856 -== ==
857 857  
858 858  == 2.4 Payload Decoder file ==
859 859  
... ... @@ -931,7 +931,6 @@
931 931  * Example 1: Downlink Payload: 0100001E  ~/~/  Set Transmit Interval (TDC) = 30 seconds
932 932  * Example 2: Downlink Payload: 0100003C  ~/~/  Set Transmit Interval (TDC) = 60 seconds
933 933  
934 -=== ===
935 935  
936 936  === 3.3.2 Get Device Status ===
937 937  
... ... @@ -980,7 +980,6 @@
980 980  * Example 3: Downlink Payload: 06000102  **~-~-->**  AT+INTMOD2=2
981 981  * Example 4: Downlink Payload: 06000201  **~-~-->**  AT+INTMOD3=1
982 982  
983 -=== ===
984 984  
985 985  === 3.3.4 Set Power Output Duration ===
986 986  
... ... @@ -998,7 +998,6 @@
998 998  |=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
999 999  |(% style="width:154px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:157px" %)(((
1000 1000  500(default)
1001 -
1002 1002  OK
1003 1003  )))
1004 1004  |(% style="width:154px" %)AT+5VT=1000|(% style="width:196px" %)(((
... ... @@ -1014,7 +1014,6 @@
1014 1014  * Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
1015 1015  * Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
1016 1016  
1017 -=== ===
1018 1018  
1019 1019  === 3.3.5 Set Weighing parameters ===
1020 1020  
... ... @@ -1040,7 +1040,6 @@
1040 1040  * Example 2: Downlink Payload: 08020FA3  **~-~-->**  AT+WEIGAP=400.3
1041 1041  * Example 3: Downlink Payload: 08020FA0  **~-~-->**  AT+WEIGAP=400.0
1042 1042  
1043 -=== ===
1044 1044  
1045 1045  === 3.3.6 Set Digital pulse count value ===
1046 1046  
... ... @@ -1064,7 +1064,6 @@
1064 1064  * Example 1: Downlink Payload: 090100000000  **~-~-->**  AT+SETCNT=1,0
1065 1065  * Example 2: Downlink Payload: 0902000003E8  **~-~-->**  AT+SETCNT=2,1000
1066 1066  
1067 -=== ===
1068 1068  
1069 1069  === 3.3.7 Set Workmode ===
1070 1070  
... ... @@ -1079,7 +1079,6 @@
1079 1079  )))
1080 1080  |(% style="width:154px" %)AT+MOD=4|(% style="width:196px" %)Set the working mode to 3DS18B20s.|(% style="width:157px" %)(((
1081 1081  OK
1082 -
1083 1083  Attention:Take effect after ATZ
1084 1084  )))
1085 1085  
... ... @@ -1090,7 +1090,6 @@
1090 1090  * Example 1: Downlink Payload: 0A01  **~-~-->**  AT+MOD=1
1091 1091  * Example 2: Downlink Payload: 0A04  **~-~-->**  AT+MOD=4
1092 1092  
1093 -= =
1094 1094  
1095 1095  = 4. Battery & Power Consumption =
1096 1096  
... ... @@ -1165,4 +1165,5 @@
1165 1165  
1166 1166  
1167 1167  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1112 +
1168 1168  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.cc>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.cc]]
Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0