Changes for page SN50v3-LB/LS -- LoRaWAN Sensor Node User Manual

Last modified by Bei Jinggeng on 2025/01/10 15:51

From version < 43.1 >

edited by Saxer Lin
on 2023/05/16 11:28

To version < 43.53 >

edited by Xiaoling
on 2023/05/16 16:13

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (2 modified, 0 added, 0 removed)

Details

Page properties

Author

@@ -1,1 +1,1 @@
--XWiki.Saxer
++XWiki.Xiaoling

Content

@@ -16,23 +16,21 @@
  == 1.1 What is SN50v3-LB LoRaWAN Generic Node ==
++
  (% style="color:blue" %)**SN50V3-LB **(%%)LoRaWAN Sensor Node is a Long Range LoRa Sensor Node. It is designed for outdoor use and powered by (% style="color:blue" %)** 8500mA Li/SOCl2 battery**(%%) for long term use.SN50V3-LB is designed to facilitate developers to quickly deploy industrial level LoRa and IoT solutions. It help users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to program, create and connect your things everywhere.
--
  (% style="color:blue" %)**SN50V3-LB wireless part**(%%) is based on SX1262 allows the user to send data and reach extremely long ranges at low data-rates.It provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, and so on.
--
  (% style="color:blue" %)**SN50V3-LB **(%%)has a powerful 48Mhz ARM microcontroller with 256KB flash and 64KB RAM. It has multiplex I/O pins to connect to different sensors.
--
  (% style="color:blue" %)**SN50V3-LB**(%%) has a built-in BLE module, user can configure the sensor remotely via Mobile Phone. It also support OTA upgrade via private LoRa protocol for easy maintaining.
--
  SN50V3-LB is the 3^^rd^^ generation of LSN50 series generic sensor node from Dragino. It is an (% style="color:blue" %)**open source project**(%%) and has a mature LoRaWAN stack and application software. User can use the pre-load software for their IoT projects or easily customize the software for different requirements.
  == 1.2 Features ==
++
  * LoRaWAN 1.0.3 Class A
  * Ultra-low power consumption
  * Open-Source hardware/software
@@ -43,8 +43,11 @@
  * Downlink to change configure
  * 8500mAh Battery for long term use
++
++
  == 1.3 Specification ==
++
  (% style="color:#037691" %)**Common DC Characteristics:**
  * Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
@@ -79,8 +79,11 @@
  * Sleep Mode: 5uA @ 3.3v
  * LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
++
++
  == 1.4 Sleep mode and working mode ==
++
  (% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
  (% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
@@ -105,6 +105,8 @@
  )))
  |(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
++
++
  == 1.6 BLE connection ==
@@ -138,6 +138,7 @@
  == Hole Option ==
++
  SN50v3-LB has different hole size options for different size sensor cable. The options provided are M12, M16 and M20. The definition is as below:
  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220627104757-1.png?rev=1.1||alt="image-20220627104757-1.png"]]
@@ -289,92 +289,74 @@
 . All modes share the same Payload Explanation from HERE.
 . By default, the device will send an uplink message every 20 minutes.
++
++
  ==== 2.3.2.1  MOD~=1 (Default Mode) ====
++
  In this mode, uplink payload includes in total 11 bytes. Uplink packets use FPORT=2.
--(% style="width:1110px" %)
--|**Size(bytes)**|**2**|(% style="width:191px" %)**2**|(% style="width:78px" %)**2**|(% style="width:216px" %)**1**|(% style="width:308px" %)**2**|(% style="width:154px" %)**2**
++(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
++|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:20px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:90px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:130px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:90px" %)**2**
  |**Value**|Bat|(% style="width:191px" %)(((
--Temperature(DS18B20)
--
--(PC13)
++Temperature(DS18B20)(PC13)
  )))|(% style="width:78px" %)(((
--ADC
--
--(PA4)
++ADC(PA4)
  )))|(% style="width:216px" %)(((
--Digital in(PB15) &
--
--Digital Interrupt(PA8)
--
--
++Digital in(PB15)&Digital Interrupt(PA8)
  )))|(% style="width:308px" %)(((
--Temperature
--
--(SHT20 or SHT31 or BH1750 Illumination Sensor)
++Temperature(SHT20 or SHT31 or BH1750 Illumination Sensor)
  )))|(% style="width:154px" %)(((
--Humidity
--
--(SHT20 or SHT31)
++Humidity(SHT20 or SHT31)
  )))
  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220627150949-6.png?rev=1.1||alt="image-20220627150949-6.png"]]
++
  ==== 2.3.2.2  MOD~=2 (Distance Mode) ====
++
  This mode is target to measure the distance. The payload of this mode is totally 11 bytes. The 8^^th^^ and 9^^th^^ bytes is for the distance.
--(% style="width:1011px" %)
--|**Size(bytes)**|**2**|(% style="width:196px" %)**2**|(% style="width:87px" %)**2**|(% style="width:189px" %)**1**|(% style="width:208px" %)**2**|(% style="width:117px" %)**2**
++(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
++|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:110px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:110px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:140px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**2**
  |**Value**|BAT|(% style="width:196px" %)(((
--Temperature(DS18B20)
--
--(PC13)
++Temperature(DS18B20)(PC13)
  )))|(% style="width:87px" %)(((
--ADC
--
--(PA4)
++ADC(PA4)
  )))|(% style="width:189px" %)(((
--Digital in(PB15) &
--
--Digital Interrupt(PA8)
++Digital in(PB15) & Digital Interrupt(PA8)
  )))|(% style="width:208px" %)(((
--Distance measure by:
--1) LIDAR-Lite V3HP
--Or
--2) Ultrasonic Sensor
++Distance measure by:1) LIDAR-Lite V3HP
++Or 2) Ultrasonic Sensor
  )))|(% style="width:117px" %)Reserved
  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656324539647-568.png?rev=1.1||alt="1656324539647-568.png"]]
--**Connection of LIDAR-Lite V3HP:**
++(% style="color:blue" %)**Connection of LIDAR-Lite V3HP:**
++
  [[image:image-20230512173758-5.png||height="563" width="712"]]
--**Connection to Ultrasonic Sensor:**
++(% style="color:blue" %)**Connection to Ultrasonic Sensor:**
++
  Need to remove R1 and R2 resistors to get low power,otherwise there will be 240uA standby current.
  [[image:image-20230512173903-6.png||height="596" width="715"]]
++
  For the connection to TF-Mini or TF-Luna , MOD2 payload is as below:
--(% style="width:1113px" %)
--|**Size(bytes)**|**2**|(% style="width:183px" %)**2**|(% style="width:173px" %)**1**|(% style="width:84px" %)**2**|(% style="width:323px" %)**2**|(% style="width:188px" %)**2**
++(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
++|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:20px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:120px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:80px" %)**2**
  |**Value**|BAT|(% style="width:183px" %)(((
--Temperature(DS18B20)
--
--(PC13)
++Temperature(DS18B20)(PC13)
  )))|(% style="width:173px" %)(((
--Digital in(PB15) &
--
--Digital Interrupt(PA8)
++Digital in(PB15) & Digital Interrupt(PA8)
  )))|(% style="width:84px" %)(((
--ADC
--
--(PA4)
++ADC(PA4)
  )))|(% style="width:323px" %)(((
  Distance measure by:1)TF-Mini plus LiDAR
  Or
@@ -383,6 +383,7 @@
  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656376779088-686.png?rev=1.1||alt="1656376779088-686.png"]]
++
  **Connection to [[TF-Mini plus>>url:http://en.benewake.com/product/detail/5c345cd0e5b3a844c472329b.html]] LiDAR(UART version):**
  Need to remove R3 and R4 resistors to get low power,otherwise there will be 400uA standby current.
@@ -389,6 +389,7 @@
  [[image:image-20230512180609-7.png||height="555" width="802"]]
++
  **Connection to [[TF-Luna>>url:http://en.benewake.com/product/detail/5e1c1fd04d839408076b6255.html]] LiDAR (UART version):**
  Need to remove R3 and R4 resistors to get low power,otherwise there will be 400uA standby current.
@@ -398,34 +398,25 @@
  ==== 2.3.2.3  MOD~=3 (3 ADC + I2C) ====
++
  This mode has total 12 bytes. Include 3 x ADC + 1x I2C
--(% style="width:1031px" %)
--|=(((
++(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
++|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
  **Size(bytes)**
--)))|=(% style="width: 68px;" %)**2**|=(% style="width: 75px;" %)**2**|=**2**|=**1**|=(% style="width: 304px;" %)2|=(% style="width: 163px;" %)2|=(% style="width: 53px;" %)1
++)))|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 140px;background-color:#D9E2F3;color:#0070C0" %)2|=(% style="width: 120px;background-color:#D9E2F3;color:#0070C0" %)2|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)1
  |**Value**|(% style="width:68px" %)(((
--ADC1
--
--(PA4)
++ADC1(PA4)
  )))|(% style="width:75px" %)(((
--ADC2
--
--(PA5)
++ADC2(PA5)
  )))|(((
--ADC3
--
--(PA8)
++ADC3(PA8)
  )))|(((
  Digital Interrupt(PB15)
  )))|(% style="width:304px" %)(((
--Temperature
--
--(SHT20 or SHT31 or BH1750 Illumination Sensor)
++Temperature(SHT20 or SHT31 or BH1750 Illumination Sensor)
  )))|(% style="width:163px" %)(((
--Humidity
--
--(SHT20 or SHT31)
++Humidity(SHT20 or SHT31)
  )))|(% style="width:53px" %)Bat
  [[image:image-20230513110214-6.png]]
@@ -436,22 +436,16 @@
  This mode has total 11 bytes. As shown below:
--(% style="width:1017px" %)
--|**Size(bytes)**|**2**|(% style="width:186px" %)**2**|(% style="width:82px" %)**2**|(% style="width:210px" %)**1**|(% style="width:191px" %)**2**|(% style="width:183px" %)**2**
++(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
++|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:20px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**
  |**Value**|BAT|(% style="width:186px" %)(((
--Temperature1(DS18B20)
--(PC13)
++Temperature1(DS18B20)(PC13)
  )))|(% style="width:82px" %)(((
--ADC
--
--(PA4)
++ADC(PA4)
  )))|(% style="width:210px" %)(((
--Digital in(PB15) &
--
--Digital Interrupt(PA8)
++Digital in(PB15) & Digital Interrupt(PA8)
  )))|(% style="width:191px" %)Temperature2(DS18B20)
--(PB9)|(% style="width:183px" %)Temperature3(DS18B20)
--(PB8)
++(PB9)|(% style="width:183px" %)Temperature3(DS18B20)(PB8)
  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656377606181-607.png?rev=1.1||alt="1656377606181-607.png"]]
@@ -458,8 +458,10 @@
  [[image:image-20230513134006-1.png||height="559" width="736"]]
++
  ==== 2.3.2.5  MOD~=5(Weight Measurement by HX711) ====
++
  [[image:image-20230512164658-2.png||height="532" width="729"]]
  Each HX711 need to be calibrated before used. User need to do below two steps:
@@ -468,6 +468,9 @@
 . Adjust calibration factor (default value 400): Put a known weight thing on load cell and run **AT+WEIGAP** to adjust the Calibration Factor.
 . (((
  Weight has 4 bytes, the unit is g.
++
++
++
  )))
  For example:
@@ -478,23 +478,17 @@
  Check the response of this command and adjust the value to match the real value for thing.
--(% style="width:767px" %)
--|=(((
++(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
++|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
  **Size(bytes)**
--)))|=**2**|=(% style="width: 193px;" %)**2**|=(% style="width: 85px;" %)**2**|=(% style="width: 186px;" %)**1**|=(% style="width: 100px;" %)**4**
++)))|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 150px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 200px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**4**
  |**Value**|BAT|(% style="width:193px" %)(((
  Temperature(DS18B20)
--
  (PC13)
--
--
  )))|(% style="width:85px" %)(((
--ADC
--
--(PA4)
++ADC(PA4)
  )))|(% style="width:186px" %)(((
  Digital in(PB15) &
--
  Digital Interrupt(PA8)
  )))|(% style="width:100px" %)Weight
@@ -501,8 +501,10 @@
  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220820120036-2.png?width=1003&height=469&rev=1.1||alt="image-20220820120036-2.png" height="469" width="1003"]]
++
  ==== 2.3.2.6  MOD~=6 (Counting Mode) ====
++
  In this mode, the device will work in counting mode. It counts the interrupt on the interrupt pins and sends the count on TDC time.
  Connection is as below. The PIR sensor is a count sensor, it will generate interrupt when people come close or go away. User can replace the PIR sensor with other counting sensors.
@@ -509,45 +509,37 @@
  [[image:image-20230512181814-9.png||height="543" width="697"]]
--**Note:** LoRaWAN wireless transmission will infect the PIR sensor. Which cause the counting value increase +1 for every uplink. User can change PIR sensor or put sensor away of the SN50_v3 to avoid this happen.
--(% style="width:961px" %)
--|=**Size(bytes)**|=**2**|=(% style="width: 256px;" %)**2**|=(% style="width: 108px;" %)**2**|=(% style="width: 126px;" %)**1**|=(% style="width: 145px;" %)**4**
--|**Value**|BAT|(% style="width:256px" %)(((
--Temperature(DS18B20)
++(% style="color:red" %)**Note:** **LoRaWAN wireless transmission will infect the PIR sensor. Which cause the counting value increase +1 for every uplink. User can change PIR sensor or put sensor away of the SN50_v3 to avoid this happen.**
--(PC13)
++(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
++|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**Size(bytes)**|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 220px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 80px;background-color:#D9E2F3;color:#0070C0" %)**4**
++|**Value**|BAT|(% style="width:256px" %)(((
++Temperature(DS18B20)(PC13)
  )))|(% style="width:108px" %)(((
--ADC
--
--(PA4)
++ADC(PA4)
  )))|(% style="width:126px" %)(((
--Digital in
--
--(PB15)
++Digital in(PB15)
  )))|(% style="width:145px" %)(((
--Count
--
--(PA8)
++Count(PA8)
  )))
  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656378441509-171.png?rev=1.1||alt="1656378441509-171.png"]]
++
  ==== 2.3.2.7  MOD~=7 (Three interrupt contact modes) ====
--(% style="width:1108px" %)
--|=(((
++
++(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
++|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
  **Size(bytes)**
--)))|=**2**|=(% style="width: 188px;" %)**2**|=(% style="width: 83px;" %)**2**|=(% style="width: 184px;" %)**1**|=(% style="width: 186px;" %)**1**|=(% style="width: 197px;" %)1|=(% style="width: 100px;" %)2
++)))|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)1|=(% style="width: 40px;background-color:#D9E2F3;color:#0070C0" %)2
  |**Value**|BAT|(% style="width:188px" %)(((
  Temperature(DS18B20)
--
  (PC13)
  )))|(% style="width:83px" %)(((
--ADC
--
--(PA5)
++ADC(PA5)
  )))|(% style="width:184px" %)(((
  Digital Interrupt1(PA8)
  )))|(% style="width:186px" %)Digital Interrupt2(PA4)|(% style="width:197px" %)Digital Interrupt3(PB15)|(% style="width:100px" %)Reserved
@@ -554,30 +554,25 @@
  [[image:image-20230513111203-7.png||height="324" width="975"]]
++
  ==== 2.3.2.8  MOD~=8 （3ADC+1DS18B20） ====
--(% style="width:922px" %)
--|=(((
++
++(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
++|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
  **Size(bytes)**
--)))|=**2**|=(% style="width: 207px;" %)**2**|=(% style="width: 94px;" %)**2**|=(% style="width: 198px;" %)**1**|=(% style="width: 84px;" %)**2**|=(% style="width: 82px;" %)2
++)))|=(% style="width: 30px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 120px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 70px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 120px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 70px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 70px;background-color:#D9E2F3;color:#0070C0" %)2
  |**Value**|BAT|(% style="width:207px" %)(((
  Temperature(DS18B20)
--
  (PC13)
  )))|(% style="width:94px" %)(((
--ADC1
--
--(PA4)
++ADC1(PA4)
  )))|(% style="width:198px" %)(((
  Digital Interrupt(PB15)
  )))|(% style="width:84px" %)(((
--ADC2
--
--(PA5)
++ADC2(PA5)
  )))|(% style="width:82px" %)(((
--ADC3
--
--(PA8)
++ADC3(PA8)
  )))
  [[image:image-20230513111231-8.png||height="335" width="900"]]
@@ -585,56 +585,50 @@
  ==== 2.3.2.9  MOD~=9 (3DS18B20+ two Interrupt count mode) ====
--(% style="width:1010px" %)
--|=(((
++
++(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
++|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
  **Size(bytes)**
--)))|=**2**|=**2**|=**2**|=**1**|=(% style="width: 193px;" %)**2**|=(% style="width: 78px;" %)4|=(% style="width: 78px;" %)4
++)))|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 80px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)4|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)4
  |**Value**|BAT|(((
  Temperature1(DS18B20)
--
  (PC13)
  )))|(((
  Temperature2(DS18B20)
--
  (PB9)
  )))|(((
  Digital Interrupt
--
  (PB15)
  )))|(% style="width:193px" %)(((
  Temperature3(DS18B20)
--
  (PB8)
  )))|(% style="width:78px" %)(((
--Count1
--
--(PA8)
++Count1(PA8)
  )))|(% style="width:78px" %)(((
--Count2
--
--(PA4)
++Count2(PA4)
  )))
  [[image:image-20230513111255-9.png||height="341" width="899"]]
--**The newly added AT command is issued correspondingly:**
++(% style="color:blue" %)**The newly added AT command is issued correspondingly:**
--**~ AT+INTMOD1** ** PA8**   pin：  Corresponding downlink:   **06 00 00 xx**
++(% style="color:#037691" %)** AT+INTMOD1 PA8**(%%)   pin：  Corresponding downlink:   (% style="color:#037691" %)**06 00 00 xx**
--**~ AT+INTMOD2**  **PA4**   pin：  Corresponding downlink:**   06 00 01 xx**
++(% style="color:#037691" %)** AT+INTMOD2 PA4**(%%)   pin：  Corresponding downlink:   (% style="color:#037691" %)**06 00 01 xx**
--**~ AT+INTMOD3**  **PB15**    pin：  Corresponding downlink:  ** 06 00 02 xx**
++(% style="color:#037691" %)** AT+INTMOD3 PB15**(%%)    pin：  Corresponding downlink:  (% style="color:#037691" %)** 06 00 02 xx**
--**AT+SETCNT=aa,bb**
++(% style="color:blue" %)**AT+SETCNT=aa,bb**
++
  When AA is 1, set the count of PA8 pin to BB    Corresponding downlink：09 01 bb bb bb bb
  When AA is 2, set the count of PA4 pin to BB    Corresponding downlink：09 02 bb bb bb bb
--
  === 2.3.3  Decode payload ===
++
  While using TTN V3 network, you can add the payload format to decode the payload.
  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656378466788-734.png?rev=1.1||alt="1656378466788-734.png"]]
@@ -646,6 +646,7 @@
  ==== 2.3.3.1  Battery Info ====
++
  Check the battery voltage for SN50v3.
  Ex1: 0x0B45 = 2885mV
@@ -655,16 +655,18 @@
  ==== 2.3.3.2  Temperature (DS18B20) ====
++
  If there is a DS18B20 connected to PC13 pin. The temperature will be uploaded in the payload.
--More DS18B20 can check the [[3 DS18B20 mode>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#2.3.4MOD3D4283xDS18B2029]]
++More DS18B20 can check the [[3 DS18B20 mode>>||anchor="H2.3.2.4MOD3D4283xDS18B2029"]]
--**Connection:**
++(% style="color:blue" %)**Connection:**
  [[image:image-20230512180718-8.png||height="538" width="647"]]
--**Example**:
++(% style="color:blue" %)**Example**:
++
  If payload is: 0105H:  (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
  If payload is: FF3FH :  (FF3F & 8000 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
@@ -674,6 +674,7 @@
  ==== 2.3.3.3  Digital Input ====
++
  The digital input for pin PB15,
  * When PB15 is high, the bit 1 of payload byte 6 is 1.
@@ -683,7 +683,7 @@
  (((
  When the digital interrupt pin is set to AT+INTMODx=0, this pin is used as a digital input pin.
--**Note:**The maximum voltage input supports 3.6V.
++(% style="color:red" %)**Note: The maximum voltage input supports 3.6V.**
  )))
@@ -690,6 +690,7 @@
  ==== 2.3.3.4  Analogue Digital Converter (ADC) ====
++
  The measuring range of the ADC is only about 0V to 1.1V The voltage resolution is about 0.24mv.
  When the measured output voltage of the sensor is not within the range of 0V and 1.1V, the output voltage terminal of the sensor shall be divided The example in the following figure is to reduce the output voltage of the sensor by three times If it is necessary to reduce more times, calculate according to the formula in the figure and connect the corresponding resistance in series.
@@ -696,19 +696,21 @@
  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220628150112-1.png?width=285&height=241&rev=1.1||alt="image-20220628150112-1.png" height="241" width="285"]]
--**Note:**If the ADC type sensor needs to be powered by SN50_v3, it is recommended to use +5V to control its switch.Only sensors with low power consumption can be powered with VDD.
++(% style="color:red" %)**Note: If the ADC type sensor needs to be powered by SN50_v3, it is recommended to use +5V to control its switch.Only sensors with low power consumption can be powered with VDD.**
  ==== 2.3.3.5  Digital Interrupt ====
++
  Digital Interrupt refers to pin PA8, and there are different trigger methods. When there is a trigger, the SN50v3 will send a packet to the server.
--**~ Interrupt connection method:**
++(% style="color:blue" %)** Interrupt connection method:**
  [[image:image-20230513105351-5.png||height="147" width="485"]]
--**Example to use with door sensor :**
++(% style="color:blue" %)**Example to use with door sensor :**
++
  The door sensor is shown at right. It is a two wire magnetic contact switch used for detecting the open/close status of doors or windows.
  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379210849-860.png?rev=1.1||alt="1656379210849-860.png"]]
@@ -715,8 +715,9 @@
  When the two pieces are close to each other, the 2 wire output will be short or open (depending on the type), while if the two pieces are away from each other, the 2 wire output will be the opposite status. So we can use SN50_v3 interrupt interface to detect the status for the door or window.
--**~ Below is the installation example:**
++(% style="color:blue" %)**Below is the installation example:**
++
  Fix one piece of the magnetic sensor to the door and connect the two pins to SN50_v3 as follows:
  * (((
@@ -728,7 +728,7 @@
  Install the other piece to the door. Find a place where the two pieces will be close to each other when the door is closed. For this particular magnetic sensor, when the door is closed, the output will be short, and PA8 will be at the VCC voltage.
--Door sensors have two types: ** NC (Normal close)** and **NO (normal open)**. The connection for both type sensors are the same. But the decoding for payload are reverse, user need to modify this in the IoT Server decoder.
++Door sensors have two types: (% style="color:blue" %)** NC (Normal close)**(%%) and (% style="color:blue" %)**NO (normal open)**(%%). The connection for both type sensors are the same. But the decoding for payload are reverse, user need to modify this in the IoT Server decoder.
  When door sensor is shorted, there will extra power consumption in the circuit, the extra current is 3v3/R14 = 3v3/1Mohm = 3uA which can be ignored.
@@ -740,12 +740,13 @@
  The command is:
--**AT+INTMOD1=1       **~/~/(more info about INMOD please refer** **[[**AT Command Manual**>>url:http://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/&file=DRAGINO_LSN50_AT_Commands_v1.5.1.pdf]]**. **)
++(% style="color:blue" %)**AT+INTMOD1=1   **   (%%) ~/~/(more info about INMOD please refer** **[[**AT Command Manual**>>url:http://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/&file=DRAGINO_LSN50_AT_Commands_v1.5.1.pdf]]**. **)
  Below shows some screen captures in TTN V3:
  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379339508-835.png?rev=1.1||alt="1656379339508-835.png"]]
++
  In MOD=1, user can use byte 6 to see the status for door open or close. TTN V3 decoder is as below:
  door= (bytes[6] & 0x80)? "CLOSE":"OPEN";
@@ -753,6 +753,7 @@
  ==== 2.3.3.6  I2C Interface (SHT20 & SHT31) ====
++
  The SDA and SCK are I2C interface lines. You can use these to connect to an I2C device and get the sensor data.
  We have made an example to show how to use the I2C interface to connect to the SHT20/ SHT31 Temperature and Humidity Sensor.
@@ -781,23 +781,26 @@
  ==== 2.3.3.7  Distance Reading ====
--Refer [[Ultrasonic Sensor section>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.8UltrasonicSensor]].
++Refer [[Ultrasonic Sensor section>>||anchor="H2.3.3.8UltrasonicSensor"]].
++
  ==== 2.3.3.8  Ultrasonic Sensor ====
++
  This Fundamental Principles of this sensor can be found at this link: [[https:~~/~~/wiki.dfrobot.com/Weather_-_proof_Ultrasonic_Sensor_with_Separate_Probe_SKU~~_~~__SEN0208>>url:https://wiki.dfrobot.com/Weather_-_proof_Ultrasonic_Sensor_with_Separate_Probe_SKU___SEN0208]]
  The SN50_v3 detects the pulse width of the sensor and converts it to mm output. The accuracy will be within 1 centimeter. The usable range (the distance between the ultrasonic probe and the measured object) is between 24cm and 600cm.
--The working principle of this sensor is similar to the **HC-SR04** ultrasonic sensor.
++The working principle of this sensor is similar to the (% style="color:blue" %)**HC-SR04**(%%) ultrasonic sensor.
  The picture below shows the connection:
  [[image:image-20230512173903-6.png||height="596" width="715"]]
--Connect to the SN50_v3 and run **AT+MOD=2** to switch to ultrasonic mode (ULT).
++Connect to the SN50_v3 and run (% style="color:blue" %)**AT+MOD=2**(%%) to switch to ultrasonic mode (ULT).
++
  The ultrasonic sensor uses the 8^^th^^ and 9^^th^^ byte for the measurement value.
  **Example:**
@@ -805,19 +805,20 @@
  Distance:  Read: 0C2D(Hex) = 3117(D)  Value:  3117 mm=311.7 cm
--
  ==== 2.3.3.9  Battery Output - BAT pin ====
++
  The BAT pin of SN50v3 is connected to the Battery directly. If users want to use BAT pin to power an external sensor. User need to make sure the external sensor is of low power consumption. Because the BAT pin is always open. If the external sensor is of high power consumption. the battery of SN50v3-LB will run out very soon.
  ==== 2.3.3.10  +5V Output ====
++
  SN50v3 will enable +5V output before all sampling and disable the +5v after all sampling.
  The 5V output time can be controlled by AT Command.
--**AT+5VT=1000**
++(% style="color:blue" %)**AT+5VT=1000**
  Means set 5V valid time to have 1000ms. So the real 5V output will actually have 1000ms + sampling time for other sensors.
@@ -824,18 +824,20 @@
  By default the AT+5VT=500. If the external sensor which require 5v and require more time to get stable state, user can use this command to increase the power ON duration for this sensor.
--
  ==== 2.3.3.11  BH1750 Illumination Sensor ====
++
  MOD=1 support this sensor. The sensor value is in the 8^^th^^ and 9^^th^^ bytes.
  [[image:image-20230512172447-4.png||height="416" width="712"]]
++
  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220628110012-12.png?rev=1.1||alt="image-20220628110012-12.png" height="361" width="953"]]
  ==== 2.3.3.12  Working MOD ====
++
  The working MOD info is contained in the Digital in & Digital Interrupt byte (7^^th^^ Byte).
  User can use the 3^^rd^^ ~~ 7^^th^^   bit of this byte to see the working mod:
@@ -852,9 +852,8 @@
  * 7: MOD8
  * 8: MOD9
--(% class="wikigeneratedid" %)
--==   ==
++
  == 2.4 Payload Decoder file ==
@@ -865,7 +865,6 @@
  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/SN50_v3-LB>>https://github.com/dragino/dragino-end-node-decoder/tree/main/SN50_v3-LB]]
--
  == 2.5 Frequency Plans ==
@@ -885,6 +885,8 @@
  * AT Command via UART Connection : See [[UART Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
  * LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
++
++
  == 3.2 General Commands ==
@@ -906,6 +906,7 @@
  === 3.3.1 Set Transmit Interval Time ===
++
  Feature: Change LoRaWAN End Node Transmit Interval.
  (% style="color:blue" %)**AT Command: AT+TDC**
@@ -931,11 +931,11 @@
  * Example 1: Downlink Payload: 0100001E       ~/~/  Set Transmit Interval (TDC) = 30 seconds
  * Example 2: Downlink Payload: 0100003C       ~/~/  Set Transmit Interval (TDC) = 60 seconds
--(% class="wikigeneratedid" %)
--===   ===
++
  === 3.3.2 Get Device Status ===
++
  Send a LoRaWAN downlink to ask the device to send its status.
  (% style="color:blue" %)**Downlink Payload:  **(%%)0x26 01
@@ -945,6 +945,7 @@
  === 3.3.3 Set Interrupt Mode ===
++
  Feature, Set Interrupt mode for GPIO_EXIT.
  (% style="color:blue" %)**AT Command: AT+INTMOD1，AT+INTMOD2，AT+INTMOD3**
@@ -981,11 +981,11 @@
  * Example 3: Downlink Payload: 06000102      **~-~-->**  AT+INTMOD2=2
  * Example 4: Downlink Payload: 06000201      **~-~-->**  AT+INTMOD3=1
--(% class="wikigeneratedid" %)
--===   ===
++
  === 3.3.4 Set Power Output Duration ===
++
  Control the output duration 5V . Before each sampling, device will
  ~1. first enable the power output to external sensor,
@@ -1000,7 +1000,6 @@
  |=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
  |(% style="width:154px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:157px" %)(((
 (default)
--
  OK
  )))
  |(% style="width:154px" %)AT+5VT=1000|(% style="width:196px" %)(((
@@ -1016,11 +1016,11 @@
  * Example 1: Downlink Payload: 070000     **~-~-->**   AT+5VT=0
  * Example 2: Downlink Payload: 0701F4      **~-~-->**  AT+5VT=500
--(% class="wikigeneratedid" %)
--===   ===
++
  === 3.3.5 Set Weighing parameters ===
++
  Feature: Working mode 5 is effective, weight initialization and weight factor setting of HX711.
  (% style="color:blue" %)**AT Command: AT+WEIGRE,AT+WEIGAP**
@@ -1043,11 +1043,11 @@
  * Example 2: Downlink Payload: 08020FA3  **~-~-->**   AT+WEIGAP=400.3
  * Example 3: Downlink Payload: 08020FA0  **~-~-->**   AT+WEIGAP=400.0
--(% class="wikigeneratedid" %)
--===   ===
++
  === 3.3.6 Set Digital pulse count value ===
++
  Feature: Set the pulse count value.
  Count 1 is PA8 pin of mode 6 and mode 9. Count 2 is PA4 pin of mode 9.
@@ -1068,11 +1068,11 @@
  * Example 1: Downlink Payload: 090100000000  **~-~-->**   AT+SETCNT=1,0
  * Example 2: Downlink Payload: 0902000003E8  **~-~-->**   AT+SETCNT=2,1000
--(% class="wikigeneratedid" %)
--===   ===
++
  === 3.3.7 Set Workmode ===
++
  Feature: Switch working mode.
  (% style="color:blue" %)**AT Command: AT+MOD**
@@ -1084,7 +1084,6 @@
  )))
  |(% style="width:154px" %)AT+MOD=4|(% style="width:196px" %)Set the working mode to 3DS18B20s.|(% style="width:157px" %)(((
  OK
--
  Attention:Take effect after ATZ
  )))
@@ -1095,9 +1095,8 @@
  * Example 1: Downlink Payload: 0A01      **~-~-->**   AT+MOD=1
  * Example 2: Downlink Payload: 0A04      **~-~-->**   AT+MOD=4
--(% class="wikigeneratedid" %)
--=   =
++
  = 4. Battery & Power Consumption =
@@ -1124,13 +1124,18 @@
  * (Recommanded way) OTA firmware update via wireless:   [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
  * Update through UART TTL interface.**[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
++
++
  = 6. FAQ =
  == 6.1 Where can i find source code of SN50v3-LB? ==
++
  * **[[Hardware Source Files>>https://github.com/dragino/Lora/tree/master/LSN50/v3.0]].**
  * **[[Software Source Code & Compile instruction>>https://github.com/dragino/SN50v3]].**
++
++
  = 7. Order Info =
@@ -1154,8 +1154,11 @@
  * (% style="color:red" %)**20**(%%): With M20 waterproof cable hole
  * (% style="color:red" %)**NH**(%%): No Hole
++
++
  = 8. Packing Info =
++
  (% style="color:#037691" %)**Package Includes**:
  * SN50v3-LB LoRaWAN Generic Node
@@ -1167,8 +1167,11 @@
  * Package Size / pcs : cm
  * Weight / pcs : g
++
++
  = 9. Support =
  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
++
  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.cc>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.cc]]

Changes for page SN50v3-LB/LS -- LoRaWAN Sensor Node User Manual

Summary

Details

Applications

Navigation