Last modified by Bei Jinggeng on 2025/01/10 15:51
<
From version < 14.1 >
edited by Edwin Chen
on 2023/05/11 23:21
To version < 43.54 >
edited by Xiaoling
on 2023/05/16 16:22
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -SN50v3-LB User Manual
1 +SN50v3-LB LoRaWAN Sensor Node User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Xiaoling
Content
... ... @@ -1,4 +1,5 @@
1 -[[image:image-20230511201248-1.png||height="403" width="489"]]
1 +(% style="text-align:center" %)
2 +[[image:image-20230515135611-1.jpeg||height="589" width="589"]]
2 2  
3 3  
4 4  
... ... @@ -15,23 +15,21 @@
15 15  
16 16  == 1.1 What is SN50v3-LB LoRaWAN Generic Node ==
17 17  
19 +
18 18  (% style="color:blue" %)**SN50V3-LB **(%%)LoRaWAN Sensor Node is a Long Range LoRa Sensor Node. It is designed for outdoor use and powered by (% style="color:blue" %)** 8500mA Li/SOCl2 battery**(%%) for long term use.SN50V3-LB is designed to facilitate developers to quickly deploy industrial level LoRa and IoT solutions. It help users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to program, create and connect your things everywhere.
19 19  
20 -
21 21  (% style="color:blue" %)**SN50V3-LB wireless part**(%%) is based on SX1262 allows the user to send data and reach extremely long ranges at low data-rates.It provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, and so on.
22 22  
23 -
24 24  (% style="color:blue" %)**SN50V3-LB **(%%)has a powerful 48Mhz ARM microcontroller with 256KB flash and 64KB RAM. It has multiplex I/O pins to connect to different sensors.
25 25  
26 -
27 27  (% style="color:blue" %)**SN50V3-LB**(%%) has a built-in BLE module, user can configure the sensor remotely via Mobile Phone. It also support OTA upgrade via private LoRa protocol for easy maintaining.
28 28  
29 -
30 30  SN50V3-LB is the 3^^rd^^ generation of LSN50 series generic sensor node from Dragino. It is an (% style="color:blue" %)**open source project**(%%) and has a mature LoRaWAN stack and application software. User can use the pre-load software for their IoT projects or easily customize the software for different requirements.
31 31  
32 32  
33 33  == 1.2 ​Features ==
34 34  
33 +
35 35  * LoRaWAN 1.0.3 Class A
36 36  * Ultra-low power consumption
37 37  * Open-Source hardware/software
... ... @@ -42,8 +42,11 @@
42 42  * Downlink to change configure
43 43  * 8500mAh Battery for long term use
44 44  
44 +
45 +
45 45  == 1.3 Specification ==
46 46  
48 +
47 47  (% style="color:#037691" %)**Common DC Characteristics:**
48 48  
49 49  * Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
... ... @@ -78,8 +78,11 @@
78 78  * Sleep Mode: 5uA @ 3.3v
79 79  * LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
80 80  
83 +
84 +
81 81  == 1.4 Sleep mode and working mode ==
82 82  
87 +
83 83  (% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
84 84  
85 85  (% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
... ... @@ -104,6 +104,8 @@
104 104  )))
105 105  |(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
106 106  
112 +
113 +
107 107  == 1.6 BLE connection ==
108 108  
109 109  
... ... @@ -122,7 +122,7 @@
122 122  == 1.7 Pin Definitions ==
123 123  
124 124  
125 -[[image:image-20230511203450-2.png||height="443" width="785"]]
132 +[[image:image-20230513102034-2.png]]
126 126  
127 127  
128 128  == 1.8 Mechanical ==
... ... @@ -137,6 +137,7 @@
137 137  
138 138  == Hole Option ==
139 139  
147 +
140 140  SN50v3-LB has different hole size options for different size sensor cable. The options provided are M12, M16 and M20. The definition is as below:
141 141  
142 142  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220627104757-1.png?rev=1.1||alt="image-20220627104757-1.png"]]
... ... @@ -288,232 +288,304 @@
288 288  1. All modes share the same Payload Explanation from HERE.
289 289  1. By default, the device will send an uplink message every 20 minutes.
290 290  
299 +
300 +
291 291  ==== 2.3.2.1  MOD~=1 (Default Mode) ====
292 292  
303 +
293 293  In this mode, uplink payload includes in total 11 bytes. Uplink packets use FPORT=2.
294 294  
295 -|**Size(bytes)**|**2**|**2**|**2**|**1**|**2**|**2**
296 -|**Value**|Bat|Temperature(DS18B20)|ADC|Digital in & Digital Interrupt|Temperature（SHT20 or SHT31 or BH1750 Illumination Sensor|Humidity（SHT20)
306 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
307 +|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:20px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:90px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:130px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:80px" %)**2**
308 +|**Value**|Bat|(% style="width:191px" %)(((
309 +Temperature(DS18B20)(PC13)
310 +)))|(% style="width:78px" %)(((
311 +ADC(PA4)
312 +)))|(% style="width:216px" %)(((
313 +Digital in(PB15)&Digital Interrupt(PA8)
314 +)))|(% style="width:308px" %)(((
315 +Temperature(SHT20 or SHT31 or BH1750 Illumination Sensor)
316 +)))|(% style="width:154px" %)(((
317 +Humidity(SHT20 or SHT31)
318 +)))
297 297  
298 298  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220627150949-6.png?rev=1.1||alt="image-20220627150949-6.png"]]
299 299  
300 300  
323 +
301 301  ==== 2.3.2.2  MOD~=2 (Distance Mode) ====
302 302  
326 +
303 303  This mode is target to measure the distance. The payload of this mode is totally 11 bytes. The 8^^th^^ and 9^^th^^ bytes is for the distance.
304 304  
305 -|**Size(bytes)**|**2**|**2**|**2**|**1**|**2**|**2**
306 -|**Value**|BAT|(((
307 -Temperature(DS18B20)
308 -)))|ADC|Digital in & Digital Interrupt|(((
309 -Distance measure by:
310 -1) LIDAR-Lite V3HP
311 -Or
329 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
330 +|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:30px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:110px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:110px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:140px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**2**
331 +|**Value**|BAT|(% style="width:196px" %)(((
332 +Temperature(DS18B20)(PC13)
333 +)))|(% style="width:87px" %)(((
334 +ADC(PA4)
335 +)))|(% style="width:189px" %)(((
336 +Digital in(PB15) & Digital Interrupt(PA8)
337 +)))|(% style="width:208px" %)(((
338 +Distance measure by:1) LIDAR-Lite V3HP
339 +Or
312 312  2) Ultrasonic Sensor
313 -)))|Reserved
341 +)))|(% style="width:117px" %)Reserved
314 314  
315 315  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656324539647-568.png?rev=1.1||alt="1656324539647-568.png"]]
316 316  
317 -**Connection of LIDAR-Lite V3HP:**
318 318  
319 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656324581381-162.png?rev=1.1||alt="1656324581381-162.png"]]
346 +(% style="color:blue" %)**Connection of LIDAR-Lite V3HP:**
320 320  
321 -**Connection to Ultrasonic Sensor:**
348 +[[image:image-20230512173758-5.png||height="563" width="712"]]
322 322  
323 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656324598488-204.png?rev=1.1||alt="1656324598488-204.png"]]
324 324  
351 +(% style="color:blue" %)**Connection to Ultrasonic Sensor:**
352 +
353 +Need to remove R1 and R2 resistors to get low power,otherwise there will be 240uA standby current.
354 +
355 +[[image:image-20230512173903-6.png||height="596" width="715"]]
356 +
357 +
325 325  For the connection to TF-Mini or TF-Luna , MOD2 payload is as below:
326 326  
327 -|**Size(bytes)**|**2**|**2**|**1**|**2**|**2**|**2**
328 -|**Value**|BAT|(((
329 -Temperature(DS18B20)
330 -)))|Digital in & Digital Interrupt|ADC|(((
360 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
361 +|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:20px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:120px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:80px" %)**2**
362 +|**Value**|BAT|(% style="width:183px" %)(((
363 +Temperature(DS18B20)(PC13)
364 +)))|(% style="width:173px" %)(((
365 +Digital in(PB15) & Digital Interrupt(PA8)
366 +)))|(% style="width:84px" %)(((
367 +ADC(PA4)
368 +)))|(% style="width:323px" %)(((
331 331  Distance measure by:1)TF-Mini plus LiDAR
332 332  Or 
333 333  2) TF-Luna LiDAR
334 -)))|Distance signal  strength
372 +)))|(% style="width:188px" %)Distance signal  strength
335 335  
336 336  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656376779088-686.png?rev=1.1||alt="1656376779088-686.png"]]
337 337  
376 +
338 338  **Connection to [[TF-Mini plus>>url:http://en.benewake.com/product/detail/5c345cd0e5b3a844c472329b.html]] LiDAR(UART version):**
339 339  
340 -Need to remove R3 and R4 resistors to get low power. Since firmware v1.7.0
379 +Need to remove R3 and R4 resistors to get low power,otherwise there will be 400uA standby current.
341 341  
342 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656376795715-436.png?rev=1.1||alt="1656376795715-436.png"]]
381 +[[image:image-20230512180609-7.png||height="555" width="802"]]
343 343  
383 +
344 344  **Connection to [[TF-Luna>>url:http://en.benewake.com/product/detail/5e1c1fd04d839408076b6255.html]] LiDAR (UART version):**
345 345  
346 -Need to remove R3 and R4 resistors to get low power. Since firmware v1.7.0
386 +Need to remove R3 and R4 resistors to get low power,otherwise there will be 400uA standby current.
347 347  
348 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656376865561-355.png?rev=1.1||alt="1656376865561-355.png"]]
388 +[[image:image-20230513105207-4.png||height="469" width="802"]]
349 349  
350 -Please use firmware version > 1.6.5 when use MOD=2, in this firmware version, user can use LSn50 v1 to power the ultrasonic sensor directly and with low power consumption.
351 351  
352 -
353 353  ==== 2.3.2.3  MOD~=3 (3 ADC + I2C) ====
354 354  
393 +
355 355  This mode has total 12 bytes. Include 3 x ADC + 1x I2C
356 356  
357 -|=(((
396 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
397 +|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
358 358  **Size(bytes)**
359 -)))|=**2**|=**2**|=**2**|=**1**|=2|=2|=1
360 -|**Value**|ADC(Pin PA0)|ADC2(PA1)|ADC3 (PA4)|(((
361 -Digital in(PA12)&Digital Interrupt1(PB14)
362 -)))|Temperature（SHT20 or SHT31 or BH1750 Illumination Sensor）|Humidity（SHT20 or SHT31)|Bat
399 +)))|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 110px;background-color:#D9E2F3;color:#0070C0" %)2|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)2|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)1
400 +|**Value**|(% style="width:68px" %)(((
401 +ADC1(PA4)
402 +)))|(% style="width:75px" %)(((
403 +ADC2(PA5)
404 +)))|(((
405 +ADC3(PA8)
406 +)))|(((
407 +Digital Interrupt(PB15)
408 +)))|(% style="width:304px" %)(((
409 +Temperature(SHT20 or SHT31 or BH1750 Illumination Sensor)
410 +)))|(% style="width:163px" %)(((
411 +Humidity(SHT20 or SHT31)
412 +)))|(% style="width:53px" %)Bat
363 363  
364 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656377431497-975.png?rev=1.1||alt="1656377431497-975.png"]]
414 +[[image:image-20230513110214-6.png]]
365 365  
366 366  
367 367  ==== 2.3.2.4 MOD~=4 (3 x DS18B20) ====
368 368  
369 -This mode is supported in firmware version since v1.6.1. Software set to AT+MOD=4
370 370  
371 -Hardware connection is as below,
372 -
373 -**( Note:**
374 -
375 -* In hardware version v1.x and v2.0 , R3 & R4 should change from 10k to 4.7k ohm to support the other 2 x DS18B20 probes.
376 -* In hardware version v2.1 no need to change R3 , R4, by default, they are 4.7k ohm already.
377 -
378 -See [[here>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H1.6A0HardwareChangelog]] for hardware changelog. **) **
379 -
380 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656377461619-156.png?rev=1.1||alt="1656377461619-156.png"]]
381 -
382 382  This mode has total 11 bytes. As shown below:
383 383  
384 -|**Size(bytes)**|**2**|**2**|**2**|**1**|**2**|**2**
385 -|**Value**|BAT|(((
386 -Temperature1
387 -(DS18B20)
388 -(PB3)
389 -)))|ADC|Digital in & Digital Interrupt|Temperature2
390 -(DS18B20)
391 -(PA9)|Temperature3
392 -(DS18B20)
393 -(PA10)
422 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
423 +|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:20px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**
424 +|**Value**|BAT|(% style="width:186px" %)(((
425 +Temperature1(DS18B20)(PC13)
426 +)))|(% style="width:82px" %)(((
427 +ADC(PA4)
428 +)))|(% style="width:210px" %)(((
429 +Digital in(PB15) & Digital Interrupt(PA8) 
430 +)))|(% style="width:191px" %)Temperature2(DS18B20)
431 +(PB9)|(% style="width:183px" %)Temperature3(DS18B20)(PB8)
394 394  
395 395  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656377606181-607.png?rev=1.1||alt="1656377606181-607.png"]]
396 396  
435 +[[image:image-20230513134006-1.png||height="559" width="736"]]
397 397  
398 -==== 2.3.2.5  MOD~=5(Weight Measurement by HX711) ====
399 399  
400 -This mode is supported in firmware version since v1.6.2. Please use v1.6.5 firmware version so user no need to use extra LDO for connection.
401 401  
439 +==== 2.3.2.5  MOD~=5(Weight Measurement by HX711) ====
402 402  
403 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656378224664-860.png?rev=1.1||alt="1656378224664-860.png"]]
404 404  
442 +[[image:image-20230512164658-2.png||height="532" width="729"]]
443 +
405 405  Each HX711 need to be calibrated before used. User need to do below two steps:
406 406  
407 407  1. Zero calibration. Don't put anything on load cell and run **AT+WEIGRE** to calibrate to Zero gram.
408 408  1. Adjust calibration factor (default value 400): Put a known weight thing on load cell and run **AT+WEIGAP** to adjust the Calibration Factor.
409 409  1. (((
410 -Remove the limit of plus or minus 5Kg in mode 5, and expand from 2 bytes to 4 bytes, the unit is g.(Since v1.8.0)
449 +Weight has 4 bytes, the unit is g.
450 +
451 +
452 +
411 411  )))
412 412  
413 413  For example:
414 414  
415 -**AT+WEIGAP =403.0**
457 +**AT+GETSENSORVALUE =0**
416 416  
417 417  Response:  Weight is 401 g
418 418  
419 419  Check the response of this command and adjust the value to match the real value for thing.
420 420  
421 -|=(((
463 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
464 +|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
422 422  **Size(bytes)**
423 -)))|=**2**|=**2**|=**2**|=**1**|=**4**|=2
424 -|**Value**|[[Bat>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.1BatteryInfo]]|[[Temperature(DS18B20)>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.2Temperature28DS18B2029]]|[[ADC>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.4AnalogueDigitalConverter28ADC29]]|[[Digital Input and Digitak Interrupt>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.3DigitalInput]]|Weight|Reserved
466 +)))|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 150px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 200px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**4**
467 +|**Value**|BAT|(% style="width:193px" %)(((
468 +Temperature(DS18B20)
469 +(PC13)
470 +)))|(% style="width:85px" %)(((
471 +ADC(PA4)
472 +)))|(% style="width:186px" %)(((
473 +Digital in(PB15) &
474 +Digital Interrupt(PA8)
475 +)))|(% style="width:100px" %)Weight
425 425  
426 426  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220820120036-2.png?width=1003&height=469&rev=1.1||alt="image-20220820120036-2.png" height="469" width="1003"]]
427 427  
428 428  
480 +
429 429  ==== 2.3.2.6  MOD~=6 (Counting Mode) ====
430 430  
483 +
431 431  In this mode, the device will work in counting mode. It counts the interrupt on the interrupt pins and sends the count on TDC time.
432 432  
433 433  Connection is as below. The PIR sensor is a count sensor, it will generate interrupt when people come close or go away. User can replace the PIR sensor with other counting sensors.
434 434  
435 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656378351863-572.png?rev=1.1||alt="1656378351863-572.png"]]
488 +[[image:image-20230512181814-9.png||height="543" width="697"]]
436 436  
437 -**Note:** LoRaWAN wireless transmission will infect the PIR sensor. Which cause the counting value increase +1 for every uplink. User can change PIR sensor or put sensor away of the LSN50 to avoid this happen.
438 438  
439 -|=**Size(bytes)**|=**2**|=**2**|=**2**|=**1**|=**4**
440 -|**Value**|[[BAT>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.1BatteryInfo]]|(((
441 -[[Temperature(DS18B20)>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.2Temperature28DS18B2029]]
442 -)))|[[ADC>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.4AnalogueDigitalConverter28ADC29]]|[[Digital in>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.3DigitalInput]]|Count
491 +(% style="color:red" %)**Note:** **LoRaWAN wireless transmission will infect the PIR sensor. Which cause the counting value increase +1 for every uplink. User can change PIR sensor or put sensor away of the SN50_v3 to avoid this happen.**
443 443  
493 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
494 +|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**Size(bytes)**|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 220px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 80px;background-color:#D9E2F3;color:#0070C0" %)**4**
495 +|**Value**|BAT|(% style="width:256px" %)(((
496 +Temperature(DS18B20)(PC13)
497 +)))|(% style="width:108px" %)(((
498 +ADC(PA4)
499 +)))|(% style="width:126px" %)(((
500 +Digital in(PB15)
501 +)))|(% style="width:145px" %)(((
502 +Count(PA8)
503 +)))
504 +
444 444  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656378441509-171.png?rev=1.1||alt="1656378441509-171.png"]]
445 445  
446 446  
508 +
447 447  ==== 2.3.2.7  MOD~=7 (Three interrupt contact modes) ====
448 448  
449 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220820140109-3.png?rev=1.1||alt="image-20220820140109-3.png"]]
450 450  
451 -|=(((
512 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
513 +|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
452 452  **Size(bytes)**
453 -)))|=**2**|=**2**|=**2**|=**1**|=**1**|=1|=2
454 -|**Value**|BAT|Temperature(DS18B20)|ADC|(((
455 -Digital in(PA12)&Digital Interrupt1(PB14)
456 -)))|Digital Interrupt2(PB15)|Digital Interrupt3(PA4)|Reserved
515 +)))|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)1|=(% style="width: 40px;background-color:#D9E2F3;color:#0070C0" %)2
516 +|**Value**|BAT|(% style="width:188px" %)(((
517 +Temperature(DS18B20)
518 +(PC13)
519 +)))|(% style="width:83px" %)(((
520 +ADC(PA5)
521 +)))|(% style="width:184px" %)(((
522 +Digital Interrupt1(PA8)
523 +)))|(% style="width:186px" %)Digital Interrupt2(PA4)|(% style="width:197px" %)Digital Interrupt3(PB15)|(% style="width:100px" %)Reserved
457 457  
525 +[[image:image-20230513111203-7.png||height="324" width="975"]]
526 +
527 +
458 458  ==== 2.3.2.8  MOD~=8 （3ADC+1DS18B20） ====
459 459  
460 -|=(((
530 +
531 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
532 +|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
461 461  **Size(bytes)**
462 -)))|=**2**|=**2**|=**2**|=**1**|=**2**|=2
463 -|**Value**|BAT|Temperature(DS18B20)|(((
464 -ADC1(PA0)
465 -)))|(((
466 -Digital in
467 -& Digital Interrupt(PB14)
468 -)))|(((
469 -ADC2(PA1)
470 -)))|(((
471 -ADC3(PA4)
534 +)))|=(% style="width: 30px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 120px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 70px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 120px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 70px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 70px;background-color:#D9E2F3;color:#0070C0" %)2
535 +|**Value**|BAT|(% style="width:207px" %)(((
536 +Temperature(DS18B20)
537 +(PC13)
538 +)))|(% style="width:94px" %)(((
539 +ADC1(PA4)
540 +)))|(% style="width:198px" %)(((
541 +Digital Interrupt(PB15)
542 +)))|(% style="width:84px" %)(((
543 +ADC2(PA5)
544 +)))|(% style="width:82px" %)(((
545 +ADC3(PA8)
472 472  )))
473 473  
474 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220823164903-2.png?rev=1.1||alt="image-20220823164903-2.png"]]
548 +[[image:image-20230513111231-8.png||height="335" width="900"]]
475 475  
476 476  
477 477  ==== 2.3.2.9  MOD~=9 (3DS18B20+ two Interrupt count mode) ====
478 478  
479 -|=(((
553 +
554 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
555 +|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
480 480  **Size(bytes)**
481 -)))|=**2**|=**2**|=**2**|=**1**|=**2**|=4|=4
557 +)))|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 80px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)4|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)4
482 482  |**Value**|BAT|(((
483 -Temperature1(PB3)
559 +Temperature1(DS18B20)
560 +(PC13)
484 484  )))|(((
485 -Temperature2(PA9)
562 +Temperature2(DS18B20)
563 +(PB9)
486 486  )))|(((
487 -Digital in
488 -& Digital Interrupt(PA4)
489 -)))|(((
490 -Temperature3(PA10)
491 -)))|(((
492 -Count1(PB14)
493 -)))|(((
494 -Count2(PB15)
565 +Digital Interrupt
566 +(PB15)
567 +)))|(% style="width:193px" %)(((
568 +Temperature3(DS18B20)
569 +(PB8)
570 +)))|(% style="width:78px" %)(((
571 +Count1(PA8)
572 +)))|(% style="width:78px" %)(((
573 +Count2(PA4)
495 495  )))
496 496  
497 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220823165322-3.png?rev=1.1||alt="image-20220823165322-3.png"]]
576 +[[image:image-20230513111255-9.png||height="341" width="899"]]
498 498  
499 -**The newly added AT command is issued correspondingly:**
578 +(% style="color:blue" %)**The newly added AT command is issued correspondingly:**
500 500  
501 -**~ AT+INTMOD1** ** PB14**  pin：  Corresponding downlink:  **06 00 00 xx**
580 +(% style="color:#037691" %)** AT+INTMOD1 PA8**(%%)  pin：  Corresponding downlink:  (% style="color:#037691" %)**06 00 00 xx**
502 502  
503 -**~ AT+INTMOD2**  **PB15** pin：  Corresponding downlink:**  06 00 01 xx**
582 +(% style="color:#037691" %)** AT+INTMOD2 PA4**(%%)  pin：  Corresponding downlink: (% style="color:#037691" %)**06 00 01 xx**
504 504  
505 -**~ AT+INTMOD3**  **PA4**  pin：  Corresponding downlink:  ** 06 00 02 xx**
584 +(% style="color:#037691" %)** AT+INTMOD3 PB15**(%%)  pin：  Corresponding downlink:  (% style="color:#037691" %)** 06 00 02 xx**
506 506  
507 -**AT+SETCNT=aa,bb** 
508 508  
509 -When AA is 1, set the count of PB14 pin to BB Corresponding downlink：09 01 bb bb bb bb
587 +(% style="color:blue" %)**AT+SETCNT=aa,bb** 
510 510  
511 -When AA is 2, set the count of PB15 pin to BB Corresponding downlink：09 02 bb bb bb bb
589 +When AA is 1, set the count of PA8 pin to BB Corresponding downlink：09 01 bb bb bb bb
512 512  
591 +When AA is 2, set the count of PA4 pin to BB Corresponding downlink：09 02 bb bb bb bb
513 513  
514 514  
515 515  === 2.3.3  ​Decode payload ===
516 516  
596 +
517 517  While using TTN V3 network, you can add the payload format to decode the payload.
518 518  
519 519  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656378466788-734.png?rev=1.1||alt="1656378466788-734.png"]]
... ... @@ -525,6 +525,7 @@
525 525  
526 526  ==== 2.3.3.1 Battery Info ====
527 527  
608 +
528 528  Check the battery voltage for SN50v3.
529 529  
530 530  Ex1: 0x0B45 = 2885mV
... ... @@ -534,16 +534,18 @@
534 534  
535 535  ==== 2.3.3.2  Temperature (DS18B20) ====
536 536  
537 -If there is a DS18B20 connected to PB3 pin. The temperature will be uploaded in the payload.
538 538  
539 -More DS18B20 can check the [[3 DS18B20 mode>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#2.3.4MOD3D4283xDS18B2029]]
619 +If there is a DS18B20 connected to PC13 pin. The temperature will be uploaded in the payload.
540 540  
541 -**Connection:**
621 +More DS18B20 can check the [[3 DS18B20 mode>>||anchor="H2.3.2.4MOD3D4283xDS18B2029"]]
542 542  
543 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656378573379-646.png?rev=1.1||alt="1656378573379-646.png"]]
623 +(% style="color:blue" %)**Connection:**
544 544  
545 -**Example**:
625 +[[image:image-20230512180718-8.png||height="538" width="647"]]
546 546  
627 +
628 +(% style="color:blue" %)**Example**:
629 +
547 547  If payload is: 0105H:  (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
548 548  
549 549  If payload is: FF3FH :  (FF3F & 8000 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
... ... @@ -553,88 +553,68 @@
553 553  
554 554  ==== 2.3.3.3 Digital Input ====
555 555  
556 -The digital input for pin PA12,
557 557  
558 -* When PA12 is high, the bit 1 of payload byte 6 is 1.
559 -* When PA12 is low, the bit 1 of payload byte 6 is 0.
640 +The digital input for pin PB15,
560 560  
642 +* When PB15 is high, the bit 1 of payload byte 6 is 1.
643 +* When PB15 is low, the bit 1 of payload byte 6 is 0.
561 561  
562 -==== 2.3.3.4  Analogue Digital Converter (ADC) ====
645 +(% class="wikigeneratedid" id="H2.3.3.4A0AnalogueDigitalConverter28ADC29" %)
646 +(((
647 +When the digital interrupt pin is set to AT+INTMODx=0, this pin is used as a digital input pin.
563 563  
564 -The ADC pins in LSN50 can measure range from 0~~Vbat, it use reference voltage from . If user need to measure a voltage > VBat, please use resistors to divide this voltage to lower than VBat, otherwise, it may destroy the ADC pin.
649 +(% style="color:red" %)**Note: The maximum voltage input supports 3.6V.**
565 565  
566 -Note: minimum VBat is 2.5v, when batrrey lower than this value. Device won't be able to send LoRa Uplink.
567 -
568 -The ADC monitors the voltage on the PA0 line, in mV.
569 -
570 -Ex: 0x021F = 543mv,
571 -
572 -**~ Example1:**  Reading an Oil Sensor (Read a resistance value):
573 -
574 -
575 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220627172409-28.png?rev=1.1||alt="image-20220627172409-28.png"]]
576 -
577 -In the LSN50, we can use PB4 and PA0 pin to calculate the resistance for the oil sensor.
578 578  
652 +)))
579 579  
580 -**Steps:**
654 +==== 2.3.3.4  Analogue Digital Converter (ADC) ====
581 581  
582 -1. Solder a 10K resistor between PA0 and VCC.
583 -1. Screw oil sensor's two pins to PA0 and PB4.
584 584  
585 -The equipment circuit is as below:
657 +The measuring range of the ADC is only about 0V to 1.1V The voltage resolution is about 0.24mv.
586 586  
587 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220627172500-29.png?rev=1.1||alt="image-20220627172500-29.png"]]
659 +When the measured output voltage of the sensor is not within the range of 0V and 1.1V, the output voltage terminal of the sensor shall be divided The example in the following figure is to reduce the output voltage of the sensor by three times If it is necessary to reduce more times, calculate according to the formula in the figure and connect the corresponding resistance in series.
588 588  
589 -According to above diagram:
661 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220628150112-1.png?width=285&height=241&rev=1.1||alt="image-20220628150112-1.png" height="241" width="285"]]
590 590  
591 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220628091043-4.png?rev=1.1||alt="image-20220628091043-4.png"]]
663 +(% style="color:red" %)**Note: If the ADC type sensor needs to be powered by SN50_v3, it is recommended to use +5V to control its switch.Only sensors with low power consumption can be powered with VDD.**
592 592  
593 -So
594 594  
595 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220628091344-6.png?rev=1.1||alt="image-20220628091344-6.png"]]
666 +==== 2.3.3.5 Digital Interrupt ====
596 596  
597 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220628091621-8.png?rev=1.1||alt="image-20220628091621-8.png"]] is the reading of ADC. So if ADC=0x05DC=0.9 v and VCC (BAT) is 2.9v
598 598  
599 -The [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220628091702-9.png?rev=1.1||alt="image-20220628091702-9.png"]] 4.5K ohm
669 +Digital Interrupt refers to pin PA8, and there are different trigger methods. When there is a trigger, the SN50v3 will send a packet to the server.
600 600  
601 -Since the Bouy is linear resistance from 10 ~~ 70cm.
671 +(% style="color:blue" %)** Interrupt connection method:**
602 602  
603 -The position of Bouy is [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220628091824-10.png?rev=1.1||alt="image-20220628091824-10.png"]] , from the bottom of Bouy.
673 +[[image:image-20230513105351-5.png||height="147" width="485"]]
604 604  
605 605  
606 -==== 2.3.3.5 Digital Interrupt ====
676 +(% style="color:blue" %)**Example to use with door sensor :**
607 607  
608 -Digital Interrupt refers to pin PB14, and there are different trigger methods. When there is a trigger, the SN50v3 will send a packet to the server.
609 -
610 -**~ Interrupt connection method:**
611 -
612 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379178634-321.png?rev=1.1||alt="1656379178634-321.png"]]
613 -
614 -**Example to use with door sensor :**
615 -
616 616  The door sensor is shown at right. It is a two wire magnetic contact switch used for detecting the open/close status of doors or windows.
617 617  
618 618  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379210849-860.png?rev=1.1||alt="1656379210849-860.png"]]
619 619  
620 -When the two pieces are close to each other, the 2 wire output will be short or open (depending on the type), while if the two pieces are away from each other, the 2 wire output will be the opposite status. So we can use LSN50 interrupt interface to detect the status for the door or window.
682 +When the two pieces are close to each other, the 2 wire output will be short or open (depending on the type), while if the two pieces are away from each other, the 2 wire output will be the opposite status. So we can use SN50_v3 interrupt interface to detect the status for the door or window.
621 621  
622 -**~ Below is the installation example:**
623 623  
624 -Fix one piece of the magnetic sensor to the door and connect the two pins to LSN50 as follows:
685 +(% style="color:blue" %)**Below is the installation example:**
625 625  
687 +Fix one piece of the magnetic sensor to the door and connect the two pins to SN50_v3 as follows:
688 +
626 626  * (((
627 -One pin to LSN50's PB14 pin
690 +One pin to SN50_v3's PA8 pin
628 628  )))
629 629  * (((
630 -The other pin to LSN50's VCC pin
693 +The other pin to SN50_v3's VDD pin
631 631  )))
632 632  
633 -Install the other piece to the door. Find a place where the two pieces will be close to each other when the door is closed. For this particular magnetic sensor, when the door is closed, the output will be short, and PB14 will be at the VCC voltage.
696 +Install the other piece to the door. Find a place where the two pieces will be close to each other when the door is closed. For this particular magnetic sensor, when the door is closed, the output will be short, and PA8 will be at the VCC voltage.
634 634  
635 -Door sensors have two types: ** NC (Normal close)** and **NO (normal open)**. The connection for both type sensors are the same. But the decoding for payload are reverse, user need to modify this in the IoT Server decoder.
698 +Door sensors have two types: (% style="color:blue" %)** NC (Normal close)**(%%) and (% style="color:blue" %)**NO (normal open)**(%%). The connection for both type sensors are the same. But the decoding for payload are reverse, user need to modify this in the IoT Server decoder.
636 636  
637 -When door sensor is shorted, there will extra power consumption in the circuit, the extra current is 3v3/R14 = 3v2/1Mohm = 0.3uA which can be ignored.
700 +When door sensor is shorted, there will extra power consumption in the circuit, the extra current is 3v3/R14 = 3v3/1Mohm = 3uA which can be ignored.
638 638  
639 639  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379283019-229.png?rev=1.1||alt="1656379283019-229.png"]]
640 640  
... ... @@ -644,35 +644,32 @@
644 644  
645 645  The command is:
646 646  
647 -**AT+INTMOD=1 **~/~/(more info about INMOD please refer** **[[**AT Command Manual**>>url:http://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/&file=DRAGINO_LSN50_AT_Commands_v1.5.1.pdf]]**. **)
710 +(% style="color:blue" %)**AT+INTMOD1=1   ** (%%) ~/~/(more info about INMOD please refer** **[[**AT Command Manual**>>url:http://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/&file=DRAGINO_LSN50_AT_Commands_v1.5.1.pdf]]**. **)
648 648  
649 649  Below shows some screen captures in TTN V3:
650 650  
651 651  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379339508-835.png?rev=1.1||alt="1656379339508-835.png"]]
652 652  
716 +
653 653  In MOD=1, user can use byte 6 to see the status for door open or close. TTN V3 decoder is as below:
654 654  
655 655  door= (bytes[6] & 0x80)? "CLOSE":"OPEN";
656 656  
657 -**Notice for hardware version LSN50 v1 < v1.3** (produced before 2018-Nov).
658 658  
659 -In this hardware version, there is no R14 resistance solder. When use the latest firmware, it should set AT+INTMOD=0 to close the interrupt. If user need to use Interrupt in this hardware version, user need to solder R14 with 10M resistor and C1 (0.1uF) on board.
722 +==== 2.3.3.6 I2C Interface (SHT20 & SHT31) ====
660 660  
661 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379563303-771.png?rev=1.1||alt="1656379563303-771.png"]]
662 662  
725 +The SDA and SCK are I2C interface lines. You can use these to connect to an I2C device and get the sensor data.
663 663  
664 -==== 2.3.3.6 I2C Interface (SHT20) ====
727 +We have made an example to show how to use the I2C interface to connect to the SHT20/ SHT31 Temperature and Humidity Sensor.
665 665  
666 -The PB6(SDA) and PB7(SCK) are I2C interface lines. You can use these to connect to an I2C device and get the sensor data.
729 +Notice: Different I2C sensors have different I2C commands set and initiate process, if user want to use other I2C sensors, User need to re-write the source code to support those sensors. SHT20/ SHT31 code in SN50_v3 will be a good reference.
667 667  
668 -We have made an example to show how to use the I2C interface to connect to the SHT20 Temperature and Humidity Sensor. This is supported in the stock firmware since v1.5 with **AT+MOD=1 (default value).**
669 -
670 -Notice: Different I2C sensors have different I2C commands set and initiate process, if user want to use other I2C sensors, User need to re-write the source code to support those sensors. SHT20 code in LSN50 will be a good reference.
671 -
672 672  Below is the connection to SHT20/ SHT31. The connection is as below:
673 673  
674 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220902163605-2.png?rev=1.1||alt="image-20220902163605-2.png"]]
675 675  
734 +[[image:image-20230513103633-3.png||height="448" width="716"]]
735 +
676 676  The device will be able to get the I2C sensor data now and upload to IoT Server.
677 677  
678 678  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379664142-345.png?rev=1.1||alt="1656379664142-345.png"]]
... ... @@ -690,21 +690,26 @@
690 690  
691 691  ==== 2.3.3.7  ​Distance Reading ====
692 692  
693 -Refer [[Ultrasonic Sensor section>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.8UltrasonicSensor]].
694 694  
754 +Refer [[Ultrasonic Sensor section>>||anchor="H2.3.3.8UltrasonicSensor"]].
695 695  
756 +
696 696  ==== 2.3.3.8 Ultrasonic Sensor ====
697 697  
698 -The LSN50 v1.5 firmware supports ultrasonic sensor (with AT+MOD=2) such as SEN0208 from DF-Robot. This Fundamental Principles of this sensor can be found at this link: [[https:~~/~~/wiki.dfrobot.com/Weather_-_proof_Ultrasonic_Sensor_with_Separate_Probe_SKU~~_~~__SEN0208>>url:https://wiki.dfrobot.com/Weather_-_proof_Ultrasonic_Sensor_with_Separate_Probe_SKU___SEN0208]]
699 699  
700 -The LSN50 detects the pulse width of the sensor and converts it to mm output. The accuracy will be within 1 centimeter. The usable range (the distance between the ultrasonic probe and the measured object) is between 24cm and 600cm.
760 +This Fundamental Principles of this sensor can be found at this link: [[https:~~/~~/wiki.dfrobot.com/Weather_-_proof_Ultrasonic_Sensor_with_Separate_Probe_SKU~~_~~__SEN0208>>url:https://wiki.dfrobot.com/Weather_-_proof_Ultrasonic_Sensor_with_Separate_Probe_SKU___SEN0208]]
701 701  
762 +The SN50_v3 detects the pulse width of the sensor and converts it to mm output. The accuracy will be within 1 centimeter. The usable range (the distance between the ultrasonic probe and the measured object) is between 24cm and 600cm.
763 +
764 +The working principle of this sensor is similar to the (% style="color:blue" %)**HC-SR04**(%%) ultrasonic sensor.
765 +
702 702  The picture below shows the connection:
703 703  
704 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656380061365-178.png?rev=1.1||alt="1656380061365-178.png"]]
768 +[[image:image-20230512173903-6.png||height="596" width="715"]]
705 705  
706 -Connect to the LSN50 and run **AT+MOD=2** to switch to ultrasonic mode (ULT).
707 707  
771 +Connect to the SN50_v3 and run (% style="color:blue" %)**AT+MOD=2**(%%) to switch to ultrasonic mode (ULT).
772 +
708 708  The ultrasonic sensor uses the 8^^th^^ and 9^^th^^ byte for the measurement value.
709 709  
710 710  **Example:**
... ... @@ -711,32 +711,21 @@
711 711  
712 712  Distance:  Read: 0C2D(Hex) = 3117(D)  Value:  3117 mm=311.7 cm
713 713  
714 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656384895430-327.png?rev=1.1||alt="1656384895430-327.png"]]
715 715  
716 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656384913616-455.png?rev=1.1||alt="1656384913616-455.png"]]
717 -
718 -You can see the serial output in ULT mode as below:
719 -
720 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656384939855-223.png?rev=1.1||alt="1656384939855-223.png"]]
721 -
722 -**In TTN V3 server:**
723 -
724 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656384961830-307.png?rev=1.1||alt="1656384961830-307.png"]]
725 -
726 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656384973646-598.png?rev=1.1||alt="1656384973646-598.png"]]
727 -
728 728  ==== 2.3.3.9  Battery Output - BAT pin ====
729 729  
782 +
730 730  The BAT pin of SN50v3 is connected to the Battery directly. If users want to use BAT pin to power an external sensor. User need to make sure the external sensor is of low power consumption. Because the BAT pin is always open. If the external sensor is of high power consumption. the battery of SN50v3-LB will run out very soon.
731 731  
732 732  
733 733  ==== 2.3.3.10  +5V Output ====
734 734  
788 +
735 735  SN50v3 will enable +5V output before all sampling and disable the +5v after all sampling. 
736 736  
737 737  The 5V output time can be controlled by AT Command.
738 738  
739 -**AT+5VT=1000**
793 +(% style="color:blue" %)**AT+5VT=1000**
740 740  
741 741  Means set 5V valid time to have 1000ms. So the real 5V output will actually have 1000ms + sampling time for other sensors.
742 742  
... ... @@ -743,18 +743,20 @@
743 743  By default the AT+5VT=500. If the external sensor which require 5v and require more time to get stable state, user can use this command to increase the power ON duration for this sensor.
744 744  
745 745  
746 -
747 747  ==== 2.3.3.11  BH1750 Illumination Sensor ====
748 748  
802 +
749 749  MOD=1 support this sensor. The sensor value is in the 8^^th^^ and 9^^th^^ bytes.
750 750  
751 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220628110012-11.jpeg?rev=1.1||alt="image-20220628110012-11.jpeg"]]
805 +[[image:image-20230512172447-4.png||height="416" width="712"]]
752 752  
753 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220628110012-12.png?rev=1.1||alt="image-20220628110012-12.png"]]
754 754  
808 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220628110012-12.png?rev=1.1||alt="image-20220628110012-12.png" height="361" width="953"]]
755 755  
810 +
756 756  ==== 2.3.3.12  Working MOD ====
757 757  
813 +
758 758  The working MOD info is contained in the Digital in & Digital Interrupt byte (7^^th^^ Byte).
759 759  
760 760  User can use the 3^^rd^^ ~~ 7^^th^^  bit of this byte to see the working mod:
... ... @@ -767,8 +767,12 @@
767 767  * 3: MOD4
768 768  * 4: MOD5
769 769  * 5: MOD6
826 +* 6: MOD7
827 +* 7: MOD8
828 +* 8: MOD9
770 770  
771 771  
831 +
772 772  == 2.4 Payload Decoder file ==
773 773  
774 774  
... ... @@ -776,173 +776,30 @@
776 776  
777 777  In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from:
778 778  
779 -[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/LSN50v2-S31%26S31B >>https://github.com/dragino/dragino-end-node-decoder/tree/main/LSN50v2-S31%26S31B]]
839 +[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/SN50_v3-LB>>https://github.com/dragino/dragino-end-node-decoder/tree/main/SN50_v3-LB]]
780 780  
781 781  
782 -== 2.5 Datalog Feature ==
842 +== 2.5 Frequency Plans ==
783 783  
784 784  
785 -Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, S31x-LB will store the reading for future retrieving purposes.
845 +The SN50v3-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
786 786  
787 -
788 -=== 2.5.1 Ways to get datalog via LoRaWAN ===
789 -
790 -
791 -Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayloadA028FPORT3D329"]], S31x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
792 -
793 -* a) S31x-LB will do an ACK check for data records sending to make sure every data arrive server.
794 -* b) S31x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB gets a ACK, S31x-LB will consider there is a network connection and resend all NONE-ACK messages.
795 -
796 -Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
797 -
798 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
799 -
800 -=== 2.5.2 Unix TimeStamp ===
801 -
802 -
803 -S31x-LB uses Unix TimeStamp format based on
804 -
805 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
806 -
807 -User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
808 -
809 -Below is the converter example
810 -
811 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="图片-20220523001219-12.png" height="298" width="720"]]
812 -
813 -So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
814 -
815 -
816 -=== 2.5.3 Set Device Time ===
817 -
818 -
819 -User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
820 -
821 -Once S31x-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to S31x-LB. If S31x-LB fails to get the time from the server, S31x-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
822 -
823 -(% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
824 -
825 -
826 -=== 2.5.4 Datalog Uplink payload (FPORT~=3) ===
827 -
828 -
829 -The Datalog uplinks will use below payload format.
830 -
831 -**Retrieval data payload:**
832 -
833 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
834 -|=(% style="width: 80px;background-color:#D9E2F3" %)(((
835 -**Size(bytes)**
836 -)))|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 120px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 103px; background-color: rgb(217, 226, 243);" %)**1**|=(% style="width: 85px; background-color: rgb(217, 226, 243);" %)**4**
837 -|(% style="width:103px" %)**Value**|(% style="width:54px" %)(((
838 -[[Temp_Black>>||anchor="HTemperatureBlack:"]]
839 -)))|(% style="width:51px" %)[[Temp_White>>||anchor="HTemperatureWhite:"]]|(% style="width:89px" %)[[Temp_ Red or Temp _White>>||anchor="HTemperatureREDorTemperatureWhite:"]]|(% style="width:103px" %)Poll message flag & Ext|(% style="width:54px" %)[[Unix Time Stamp>>||anchor="H2.5.2UnixTimeStamp"]]
840 -
841 -**Poll message flag & Ext:**
842 -
843 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20221006192726-1.png?width=754&height=112&rev=1.1||alt="图片-20221006192726-1.png" height="112" width="754"]]
844 -
845 -**No ACK Message**:  1: This message means this payload is fromn Uplink Message which doesn't get ACK from the server before ( for **PNACKMD=1** feature)
846 -
847 -**Poll Message Flag**: 1: This message is a poll message reply.
848 -
849 -* Poll Message Flag is set to 1.
850 -
851 -* Each data entry is 11 bytes, to save airtime and battery, devices will send max bytes according to the current DR and Frequency bands.
852 -
853 -For example, in US915 band, the max payload for different DR is:
854 -
855 -**a) DR0:** max is 11 bytes so one entry of data
856 -
857 -**b) DR1:** max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
858 -
859 -**c) DR2:** total payload includes 11 entries of data
860 -
861 -**d) DR3: **total payload includes 22 entries of data.
862 -
863 -If devise doesn't have any data in the polling time. Device will uplink 11 bytes of 0   
864 -
865 -
866 -**Example:**
867 -
868 -If S31x-LB has below data inside Flash:
869 -
870 -[[image:1682646494051-944.png]]
871 -
872 -If user sends below downlink command: 3160065F9760066DA705
873 -
874 -Where : Start time: 60065F97 = time 21/1/19 04:27:03
875 -
876 - Stop time: 60066DA7= time 21/1/19 05:27:03
877 -
878 -
879 -**S31x-LB will uplink this payload.**
880 -
881 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-13.png?width=727&height=421&rev=1.1||alt="图片-20220523001219-13.png" height="421" width="727"]]
882 -
883 -(((
884 -__**7FFF089801464160065F97**__ **__7FFF__ __088E__ __014B__ __41__ __60066009__** 7FFF0885014E41600660667FFF0875015141600662BE7FFF086B015541600665167FFF08660155416006676E7FFF085F015A41600669C67FFF0857015D4160066C1E
885 -)))
886 -
887 -(((
888 -Where the first 11 bytes is for the first entry:
889 -)))
890 -
891 -(((
892 -7FFF089801464160065F97
893 -)))
894 -
895 -(((
896 -**Ext sensor data**=0x7FFF/100=327.67
897 -)))
898 -
899 -(((
900 -**Temp**=0x088E/100=22.00
901 -)))
902 -
903 -(((
904 -**Hum**=0x014B/10=32.6
905 -)))
906 -
907 -(((
908 -**poll message flag & Ext**=0x41,means reply data,Ext=1
909 -)))
910 -
911 -(((
912 -**Unix time** is 0x60066009=1611030423s=21/1/19 04:27:03
913 -)))
914 -
915 -
916 -(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的
917 -
918 -== 2.6 Temperature Alarm Feature ==
919 -
920 -
921 -S31x-LB work flow with Alarm feature.
922 -
923 -
924 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/image-20220623090437-1.png?rev=1.1||alt="图片-20220623090437-1.png"]]
925 -
926 -
927 -== 2.7 Frequency Plans ==
928 -
929 -
930 -The S31x-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
931 -
932 932  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
933 933  
934 934  
935 -= 3. Configure S31x-LB =
850 += 3. Configure SN50v3-LB =
936 936  
937 937  == 3.1 Configure Methods ==
938 938  
939 939  
940 -S31x-LB supports below configure method:
855 +SN50v3-LB supports below configure method:
941 941  
942 942  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
943 943  * AT Command via UART Connection : See [[UART Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
944 944  * LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
945 945  
861 +
862 +
946 946  == 3.2 General Commands ==
947 947  
948 948  
... ... @@ -956,7 +956,7 @@
956 956  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
957 957  
958 958  
959 -== 3.3 Commands special design for S31x-LB ==
876 +== 3.3 Commands special design for SN50v3-LB ==
960 960  
961 961  
962 962  These commands only valid for S31x-LB, as below:
... ... @@ -990,10 +990,12 @@
990 990  * Example 1: Downlink Payload: 0100001E  ~/~/  Set Transmit Interval (TDC) = 30 seconds
991 991  * Example 2: Downlink Payload: 0100003C  ~/~/  Set Transmit Interval (TDC) = 60 seconds
992 992  
910 +
911 +
993 993  === 3.3.2 Get Device Status ===
994 994  
995 995  
996 -Send a LoRaWAN downlink to ask device send Alarm settings.
915 +Send a LoRaWAN downlink to ask the device to send its status.
997 997  
998 998  (% style="color:blue" %)**Downlink Payload:  **(%%)0x26 01
999 999  
... ... @@ -1000,108 +1000,159 @@
1000 1000  Sensor will upload Device Status via FPORT=5. See payload section for detail.
1001 1001  
1002 1002  
1003 -=== 3.3.3 Set Temperature Alarm Threshold ===
922 +=== 3.3.3 Set Interrupt Mode ===
1004 1004  
1005 -* (% style="color:blue" %)**AT Command:**
1006 1006  
1007 -(% style="color:#037691" %)**AT+SHTEMP=min,max**
925 +Feature, Set Interrupt mode for GPIO_EXIT.
1008 1008  
1009 -* When min=0, and max≠0, Alarm higher than max
1010 -* When min≠0, and max=0, Alarm lower than min
1011 -* When min≠0 and max≠0, Alarm higher than max or lower than min
927 +(% style="color:blue" %)**AT Command: AT+INTMOD1，AT+INTMOD2，AT+INTMOD3**
1012 1012  
1013 -Example:
929 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
930 +|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
931 +|(% style="width:154px" %)AT+INTMOD1=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
932 +0
933 +OK
934 +the mode is 0 =Disable Interrupt
935 +)))
936 +|(% style="width:154px" %)AT+INTMOD1=2|(% style="width:196px" %)(((
937 +Set Transmit Interval
938 +0. (Disable Interrupt),
939 +~1. (Trigger by rising and falling edge)
940 +2. (Trigger by falling edge)
941 +3. (Trigger by rising edge)
942 +)))|(% style="width:157px" %)OK
943 +|(% style="width:154px" %)AT+INTMOD2=3|(% style="width:196px" %)(((
944 +Set Transmit Interval
1014 1014  
1015 - AT+SHTEMP=0,30   ~/~/ Alarm when temperature higher than 30.
946 +trigger by rising edge.
947 +)))|(% style="width:157px" %)OK
948 +|(% style="width:154px" %)AT+INTMOD3=0|(% style="width:196px" %)Disable Interrupt|(% style="width:157px" %)OK
1016 1016  
1017 -* (% style="color:blue" %)**Downlink Payload:**
950 +(% style="color:blue" %)**Downlink Command: 0x06**
1018 1018  
1019 -(% style="color:#037691" %)**0x(0C 01 00 1E)**  (%%) ~/~/ Set AT+SHTEMP=0,30
952 +Format: Command Code (0x06) followed by 3 bytes.
1020 1020  
1021 -(% style="color:red" %)**(note: 3^^rd^^ byte= 0x00 for low limit(not set), 4^^th^^ byte = 0x1E for high limit: 30)**
954 +This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
1022 1022  
956 +* Example 1: Downlink Payload: 06000000  **~-~-->**  AT+INTMOD1=0
957 +* Example 2: Downlink Payload: 06000003  **~-~-->**  AT+INTMOD1=3
958 +* Example 3: Downlink Payload: 06000102  **~-~-->**  AT+INTMOD2=2
959 +* Example 4: Downlink Payload: 06000201  **~-~-->**  AT+INTMOD3=1
1023 1023  
1024 -=== 3.3.4 Set Humidity Alarm Threshold ===
1025 1025  
1026 -* (% style="color:blue" %)**AT Command:**
1027 1027  
1028 -(% style="color:#037691" %)**AT+SHHUM=min,max**
963 +=== 3.3.4 Set Power Output Duration ===
1029 1029  
1030 -* When min=0, and max≠0, Alarm higher than max
1031 -* When min≠0, and max=0, Alarm lower than min
1032 -* When min≠0 and max≠0, Alarm higher than max or lower than min
1033 1033  
1034 -Example:
966 +Control the output duration 5V . Before each sampling, device will
1035 1035  
1036 - AT+SHHUM=70,0  ~/~/ Alarm when humidity lower than 70%.
968 +~1. first enable the power output to external sensor,
1037 1037  
1038 -* (% style="color:blue" %)**Downlink Payload:**
970 +2. keep it on as per duration, read sensor value and construct uplink payload
1039 1039  
1040 -(% style="color:#037691" %)**0x(0C 02 46 00)**(%%)  ~/~/ Set AT+SHTHUM=70,0
972 +3. final, close the power output.
1041 1041  
1042 -(% style="color:red" %)**(note: 3^^rd^^ byte= 0x46 for low limit (70%), 4^^th^^ byte = 0x00 for high limit (not set))**
974 +(% style="color:blue" %)**AT Command: AT+5VT**
1043 1043  
976 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
977 +|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
978 +|(% style="width:154px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:157px" %)(((
979 +500(default)
980 +OK
981 +)))
982 +|(% style="width:154px" %)AT+5VT=1000|(% style="width:196px" %)(((
983 +Close after a delay of 1000 milliseconds.
984 +)))|(% style="width:157px" %)OK
1044 1044  
1045 -=== 3.3.5 Set Alarm Interval ===
986 +(% style="color:blue" %)**Downlink Command: 0x07**
1046 1046  
1047 -The shortest time of two Alarm packet. (unit: min)
988 +Format: Command Code (0x07) followed by 2 bytes.
1048 1048  
1049 -* (% style="color:blue" %)**AT Command:**
990 +The first and second bytes are the time to turn on.
1050 1050  
1051 -(% style="color:#037691" %)**AT+ATDC=30** (%%) ~/~/ The shortest interval of two Alarm packets is 30 minutes, Means is there is an alarm packet uplink, there won't be another one in the next 30 minutes.
992 +* Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
993 +* Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
1052 1052  
1053 -* (% style="color:blue" %)**Downlink Payload:**
1054 1054  
1055 -(% style="color:#037691" %)**0x(0D 00 1E)**(%%)     **~-~--> ** Set AT+ATDC=0x 00 1E = 30 minutes
1056 1056  
997 +=== 3.3.5 Set Weighing parameters ===
1057 1057  
1058 -=== 3.3.6 Get Alarm settings ===
1059 1059  
1000 +Feature: Working mode 5 is effective, weight initialization and weight factor setting of HX711.
1060 1060  
1061 -Send a LoRaWAN downlink to ask device send Alarm settings.
1002 +(% style="color:blue" %)**AT Command: AT+WEIGRE,AT+WEIGAP**
1062 1062  
1063 -* (% style="color:#037691" %)**Downlink Payload:  **(%%)0x0E 01
1004 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1005 +|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
1006 +|(% style="width:154px" %)AT+WEIGRE|(% style="width:196px" %)Weight is initialized to 0.|(% style="width:157px" %)OK
1007 +|(% style="width:154px" %)AT+WEIGAP=？|(% style="width:196px" %)400.0|(% style="width:157px" %)OK(default)
1008 +|(% style="width:154px" %)AT+WEIGAP=400.3|(% style="width:196px" %)Set the factor to 400.3.|(% style="width:157px" %)OK
1064 1064  
1065 -**Example:**
1010 +(% style="color:blue" %)**Downlink Command: 0x08**
1066 1066  
1067 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/1655948182791-225.png?rev=1.1||alt="1655948182791-225.png"]]
1012 +Format: Command Code (0x08) followed by 2 bytes or 4 bytes.
1068 1068  
1014 +Use AT+WEIGRE when the first byte is 1, only 1 byte. When it is 2, use AT+WEIGAP, there are 3 bytes.
1069 1069  
1070 -**Explain:**
1016 +The second and third bytes are multiplied by 10 times to be the AT+WEIGAP value.
1071 1071  
1072 -* Alarm & MOD bit is 0x7C, 0x7C >> 2 = 0x31: Means this message is the Alarm settings message.
1018 +* Example 1: Downlink Payload: 0801  **~-~-->**  AT+WEIGRE
1019 +* Example 2: Downlink Payload: 08020FA3  **~-~-->**  AT+WEIGAP=400.3
1020 +* Example 3: Downlink Payload: 08020FA0  **~-~-->**  AT+WEIGAP=400.0
1073 1073  
1074 -=== 3.3.7 Set Interrupt Mode ===
1075 1075  
1076 1076  
1077 -Feature, Set Interrupt mode for GPIO_EXIT.
1024 +=== 3.3.6 Set Digital pulse count value ===
1078 1078  
1079 -(% style="color:blue" %)**AT Command: AT+INTMOD**
1080 1080  
1027 +Feature: Set the pulse count value.
1028 +
1029 +Count 1 is PA8 pin of mode 6 and mode 9. Count 2 is PA4 pin of mode 9.
1030 +
1031 +(% style="color:blue" %)**AT Command: AT+SETCNT**
1032 +
1081 1081  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1082 1082  |=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
1083 -|(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
1084 -0
1035 +|(% style="width:154px" %)AT+SETCNT=1,100|(% style="width:196px" %)Initialize the count value 1 to 100.|(% style="width:157px" %)OK
1036 +|(% style="width:154px" %)AT+SETCNT=2,0|(% style="width:196px" %)Initialize the count value 2 to 0.|(% style="width:157px" %)OK
1037 +
1038 +(% style="color:blue" %)**Downlink Command: 0x09**
1039 +
1040 +Format: Command Code (0x09) followed by 5 bytes.
1041 +
1042 +The first byte is to select which count value to initialize, and the next four bytes are the count value to be initialized.
1043 +
1044 +* Example 1: Downlink Payload: 090100000000  **~-~-->**  AT+SETCNT=1,0
1045 +* Example 2: Downlink Payload: 0902000003E8  **~-~-->**  AT+SETCNT=2,1000
1046 +
1047 +
1048 +
1049 +=== 3.3.7 Set Workmode ===
1050 +
1051 +
1052 +Feature: Switch working mode.
1053 +
1054 +(% style="color:blue" %)**AT Command: AT+MOD**
1055 +
1056 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1057 +|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
1058 +|(% style="width:154px" %)AT+MOD=?|(% style="width:196px" %)Get the current working mode.|(% style="width:157px" %)(((
1085 1085  OK
1086 -the mode is 0 =Disable Interrupt
1087 1087  )))
1088 -|(% style="width:154px" %)AT+INTMOD=2|(% style="width:196px" %)(((
1089 -Set Transmit Interval
1090 -0. (Disable Interrupt),
1091 -~1. (Trigger by rising and falling edge)
1092 -2. (Trigger by falling edge)
1093 -3. (Trigger by rising edge)
1094 -)))|(% style="width:157px" %)OK
1061 +|(% style="width:154px" %)AT+MOD=4|(% style="width:196px" %)Set the working mode to 3DS18B20s.|(% style="width:157px" %)(((
1062 +OK
1063 +Attention:Take effect after ATZ
1064 +)))
1095 1095  
1096 -(% style="color:blue" %)**Downlink Command: 0x06**
1066 +(% style="color:blue" %)**Downlink Command: 0x0A**
1097 1097  
1098 -Format: Command Code (0x06) followed by 3 bytes.
1068 +Format: Command Code (0x0A) followed by 1 bytes.
1099 1099  
1100 -This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
1070 +* Example 1: Downlink Payload: 0A01  **~-~-->**  AT+MOD=1
1071 +* Example 2: Downlink Payload: 0A04  **~-~-->**  AT+MOD=4
1101 1101  
1102 -* Example 1: Downlink Payload: 06000000  ~/~/  Turn off interrupt mode
1103 -* Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
1104 1104  
1074 +
1105 1105  = 4. Battery & Power Consumption =
1106 1106  
1107 1107  
... ... @@ -1128,10 +1128,18 @@
1128 1128  * (Recommanded way) OTA firmware update via wireless:   [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
1129 1129  * Update through UART TTL interface.**[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
1130 1130  
1101 +
1102 +
1131 1131  = 6. FAQ =
1132 1132  
1105 +== 6.1 Where can i find source code of SN50v3-LB? ==
1133 1133  
1134 1134  
1108 +* **[[Hardware Source Files>>https://github.com/dragino/Lora/tree/master/LSN50/v3.0]].**
1109 +* **[[Software Source Code & Compile instruction>>https://github.com/dragino/SN50v3]].**
1110 +
1111 +
1112 +
1135 1135  = 7. Order Info =
1136 1136  
1137 1137  
... ... @@ -1155,8 +1155,11 @@
1155 1155  * (% style="color:red" %)**20**(%%): With M20 waterproof cable hole
1156 1156  * (% style="color:red" %)**NH**(%%): No Hole
1157 1157  
1136 +
1137 +
1158 1158  = 8. ​Packing Info =
1159 1159  
1140 +
1160 1160  (% style="color:#037691" %)**Package Includes**:
1161 1161  
1162 1162  * SN50v3-LB LoRaWAN Generic Node
... ... @@ -1168,8 +1168,11 @@
1168 1168  * Package Size / pcs : cm
1169 1169  * Weight / pcs : g
1170 1170  
1152 +
1153 +
1171 1171  = 9. Support =
1172 1172  
1173 1173  
1174 1174  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1175 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
1158 +
1159 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.cc>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.cc]]
image-20230512163509-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +1.5 MB
Content
image-20230512164658-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +2.0 MB
Content
image-20230512170701-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +2.5 MB
Content
image-20230512172447-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +2.0 MB
Content
image-20230512173758-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +2.1 MB
Content
image-20230512173903-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +2.3 MB
Content
image-20230512180609-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +2.3 MB
Content
image-20230512180718-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +2.3 MB
Content
image-20230512181814-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +2.2 MB
Content
image-20230513084523-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +611.3 KB
Content
image-20230513102034-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +607.1 KB
Content
image-20230513103633-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +595.5 KB
Content
image-20230513105207-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +384.7 KB
Content
image-20230513105351-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +37.6 KB
Content
image-20230513110214-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +172.7 KB
Content
image-20230513111203-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +79.9 KB
Content
image-20230513111231-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +64.9 KB
Content
image-20230513111255-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +70.4 KB
Content
image-20230513134006-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +1.9 MB
Content
image-20230515135611-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +948.0 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0