Last modified by Bei Jinggeng on 2025/01/10 15:51
<
From version < 12.1 >
edited by Edwin Chen
on 2023/05/11 23:06
To version < 87.1 >
edited by Xiaoling
on 2024/01/03 09:57
>
Change comment: Uploaded new attachment "image-20240103095714-2.png", version {1}

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -SN50v3-LB User Manual
1 +SN50v3-LB LoRaWAN Sensor Node User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Xiaoling
Content
... ... @@ -1,8 +1,9 @@
1 -[[image:image-20230511201248-1.png||height="403" width="489"]]
1 +(% style="text-align:center" %)
2 +[[image:image-20230515135611-1.jpeg||height="589" width="589"]]
2 2  
3 3  
4 4  
5 -**Table of Contents：**
6 +**Table of Contents:**
6 6  
7 7  {{toc/}}
8 8  
... ... @@ -15,23 +15,20 @@
15 15  
16 16  == 1.1 What is SN50v3-LB LoRaWAN Generic Node ==
17 17  
19 +
18 18  (% style="color:blue" %)**SN50V3-LB **(%%)LoRaWAN Sensor Node is a Long Range LoRa Sensor Node. It is designed for outdoor use and powered by (% style="color:blue" %)** 8500mA Li/SOCl2 battery**(%%) for long term use.SN50V3-LB is designed to facilitate developers to quickly deploy industrial level LoRa and IoT solutions. It help users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to program, create and connect your things everywhere.
19 19  
22 +(% style="color:blue" %)**SN50V3-LB wireless part**(%%) is based on SX1262 allows the user to send data and reach extremely long ranges at low data-rates.It provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, and so on.
20 20  
21 -(% style="color:blue" %)**SN50V3-LB wireless part**(%%) is based on SX1262 allows the user to send data and reach extremely long ranges at low data-rates.It provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, and so on.
22 -
23 -
24 24  (% style="color:blue" %)**SN50V3-LB **(%%)has a powerful 48Mhz ARM microcontroller with 256KB flash and 64KB RAM. It has multiplex I/O pins to connect to different sensors.
25 25  
26 -
27 27  (% style="color:blue" %)**SN50V3-LB**(%%) has a built-in BLE module, user can configure the sensor remotely via Mobile Phone. It also support OTA upgrade via private LoRa protocol for easy maintaining.
28 28  
29 -
30 30  SN50V3-LB is the 3^^rd^^ generation of LSN50 series generic sensor node from Dragino. It is an (% style="color:blue" %)**open source project**(%%) and has a mature LoRaWAN stack and application software. User can use the pre-load software for their IoT projects or easily customize the software for different requirements.
31 31  
32 -
33 33  == 1.2 ​Features ==
34 34  
32 +
35 35  * LoRaWAN 1.0.3 Class A
36 36  * Ultra-low power consumption
37 37  * Open-Source hardware/software
... ... @@ -44,6 +44,7 @@
44 44  
45 45  == 1.3 Specification ==
46 46  
45 +
47 47  (% style="color:#037691" %)**Common DC Characteristics:**
48 48  
49 49  * Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
... ... @@ -80,6 +80,7 @@
80 80  
81 81  == 1.4 Sleep mode and working mode ==
82 82  
82 +
83 83  (% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
84 84  
85 85  (% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
... ... @@ -88,7 +88,7 @@
88 88  == 1.5 Button & LEDs ==
89 89  
90 90  
91 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675071855856-879.png]]
91 +[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675071855856-879.png]][[image:image-20231231203148-2.png||height="456" width="316"]]
92 92  
93 93  
94 94  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
... ... @@ -122,21 +122,27 @@
122 122  == 1.7 Pin Definitions ==
123 123  
124 124  
125 -[[image:image-20230511203450-2.png||height="443" width="785"]]
125 +[[image:image-20230610163213-1.png||height="404" width="699"]]
126 126  
127 127  
128 128  == 1.8 Mechanical ==
129 129  
130 +=== 1.8.1 for LB version ===
130 130  
131 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
132 132  
133 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143899218-599.png]]
133 +[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]][[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143899218-599.png]]
134 134  
135 +
135 135  [[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
136 136  
138 +=== 1.8.2 for LS version ===
137 137  
138 -== Hole Option ==
140 +[[image:image-20231231203439-3.png||height="385" width="886"]]
139 139  
142 +
143 +== 1.9 Hole Option ==
144 +
145 +
140 140  SN50v3-LB has different hole size options for different size sensor cable. The options provided are M12, M16 and M20. The definition is as below:
141 141  
142 142  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220627104757-1.png?rev=1.1||alt="image-20220627104757-1.png"]]
... ... @@ -149,7 +149,7 @@
149 149  == 2.1 How it works ==
150 150  
151 151  
152 -The SN50v3-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the S31x-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
158 +The SN50v3-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the SN50v3-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
153 153  
154 154  
155 155  == 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
... ... @@ -157,7 +157,7 @@
157 157  
158 158  Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
159 159  
160 -The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
166 +The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
161 161  
162 162  
163 163  (% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from SN50v3-LB.
... ... @@ -206,7 +206,7 @@
206 206  === 2.3.1 Device Status, FPORT~=5 ===
207 207  
208 208  
209 -Users can use the downlink command(**0x26 01**) to ask SN50v3 to send device configure detail, include device configure status. SN50v3 will uplink a payload via FPort=5 to server.
215 +Users can use the downlink command(**0x26 01**) to ask SN50v3-LB to send device configure detail, include device configure status. SN50v3-LB will uplink a payload via FPort=5 to server.
210 210  
211 211  The Payload format is as below.
212 212  
... ... @@ -214,44 +214,44 @@
214 214  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
215 215  |(% colspan="6" style="background-color:#d9e2f3; color:#0070c0" %)**Device Status (FPORT=5)**
216 216  |(% style="width:103px" %)**Size (bytes)**|(% style="width:72px" %)**1**|**2**|(% style="width:91px" %)**1**|(% style="width:86px" %)**1**|(% style="width:44px" %)**2**
217 -|(% style="width:103px" %)**Value**|(% style="width:72px" %)Sensor Model|Firmware Version|(% style="width:91px" %)Frequency Band|(% style="width:86px" %)Sub-band|(% style="width:44px" %)BAT
223 +|(% style="width:103px" %)Value|(% style="width:72px" %)Sensor Model|Firmware Version|(% style="width:91px" %)Frequency Band|(% style="width:86px" %)Sub-band|(% style="width:44px" %)BAT
218 218  
219 219  Example parse in TTNv3
220 220  
221 221  
222 -(% style="color:#037691" %)**Sensor Model**(%%): For SN50v3, this value is 0x1C
228 +(% style="color:#037691" %)**Sensor Model**(%%): For SN50v3-LB, this value is 0x1C
223 223  
224 224  (% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
225 225  
226 226  (% style="color:#037691" %)**Frequency Band**:
227 227  
228 -*0x01: EU868
234 +0x01: EU868
229 229  
230 -*0x02: US915
236 +0x02: US915
231 231  
232 -*0x03: IN865
238 +0x03: IN865
233 233  
234 -*0x04: AU915
240 +0x04: AU915
235 235  
236 -*0x05: KZ865
242 +0x05: KZ865
237 237  
238 -*0x06: RU864
244 +0x06: RU864
239 239  
240 -*0x07: AS923
246 +0x07: AS923
241 241  
242 -*0x08: AS923-1
248 +0x08: AS923-1
243 243  
244 -*0x09: AS923-2
250 +0x09: AS923-2
245 245  
246 -*0x0a: AS923-3
252 +0x0a: AS923-3
247 247  
248 -*0x0b: CN470
254 +0x0b: CN470
249 249  
250 -*0x0c: EU433
256 +0x0c: EU433
251 251  
252 -*0x0d: KR920
258 +0x0d: KR920
253 253  
254 -*0x0e: MA869
260 +0x0e: MA869
255 255  
256 256  
257 257  (% style="color:#037691" %)**Sub-Band**:
... ... @@ -275,16 +275,16 @@
275 275  === 2.3.2 Working Modes & Sensor Data. Uplink via FPORT~=2 ===
276 276  
277 277  
278 -SN50v3 has different working mode for the connections of different type of sensors. This section describes these modes. Use can use the AT Command AT+MOD to set SN50v3 to different working modes.
284 +SN50v3-LB has different working mode for the connections of different type of sensors. This section describes these modes. Use can use the AT Command (% style="color:blue" %)**AT+MOD**(%%) to set SN50v3-LB to different working modes.
279 279  
280 280  For example:
281 281  
282 - **AT+MOD=2  ** ~/~/ will set the SN50v3 to work in MOD=2 distance mode which target to measure distance via Ultrasonic Sensor.
288 + (% style="color:blue" %)**AT+MOD=2  ** (%%) ~/~/ will set the SN50v3 to work in MOD=2 distance mode which target to measure distance via Ultrasonic Sensor.
283 283  
284 284  
285 -(% style="color:red" %) **Important Notice:** (%%)
291 +(% style="color:red" %) **Important Notice:**
286 286  
287 -1. Some working modes has payload more than 12 bytes, The US915/AU915/AS923 frequency bands' definition has maximum 11 bytes in **DR0**. Server sides will see NULL payload while SN50v3 transmit in DR0 with 12 bytes payload.
293 +~1. Some working modes has payload more than 12 bytes, The US915/AU915/AS923 frequency bands' definition has maximum 11 bytes in (% style="color:blue" %)**DR0**(%%). Server sides will see NULL payload while SN50v3-LB transmit in DR0 with 12 bytes payload.
288 288  
289 289  2. All modes share the same Payload Explanation from HERE.
290 290  
... ... @@ -291,223 +291,394 @@
291 291  3. By default, the device will send an uplink message every 20 minutes.
292 292  
293 293  
294 -=== 2.3.1  MOD~=1 (Default Mode) ===
300 +==== 2.3.2.1  MOD~=1 (Default Mode) ====
295 295  
302 +
296 296  In this mode, uplink payload includes in total 11 bytes. Uplink packets use FPORT=2.
297 297  
298 -|**Size(bytes)**|**2**|**2**|**2**|**1**|**2**|**2**
299 -|**Value**|Bat|Temperature(DS18B20)|ADC|Digital in & Digital Interrupt|Temperature（SHT20 or SHT31 or BH1750 Illumination Sensor|Humidity（SHT20)
305 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
306 +|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:20px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:90px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:130px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:80px" %)**2**
307 +|Value|Bat|(% style="width:191px" %)(((
308 +Temperature(DS18B20)(PC13)
309 +)))|(% style="width:78px" %)(((
310 +ADC(PA4)
311 +)))|(% style="width:216px" %)(((
312 +Digital in(PB15)&Digital Interrupt(PA8)
313 +)))|(% style="width:308px" %)(((
314 +Temperature(SHT20 or SHT31 or BH1750 Illumination Sensor)
315 +)))|(% style="width:154px" %)(((
316 +Humidity(SHT20 or SHT31)
317 +)))
300 300  
301 301  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220627150949-6.png?rev=1.1||alt="image-20220627150949-6.png"]]
302 302  
303 -=== 2.3.2 MOD~=2 (Distance Mode) ===
304 304  
322 +==== 2.3.2.2  MOD~=2 (Distance Mode) ====
323 +
324 +
305 305  This mode is target to measure the distance. The payload of this mode is totally 11 bytes. The 8^^th^^ and 9^^th^^ bytes is for the distance.
306 306  
307 -|**Size(bytes)**|**2**|**2**|**2**|**1**|**2**|**2**
308 -|**Value**|BAT|(((
309 -Temperature(DS18B20)
310 -)))|ADC|Digital in & Digital Interrupt|(((
311 -Distance measure by:
312 -1) LIDAR-Lite V3HP
313 -Or
314 -2) Ultrasonic Sensor
315 -)))|Reserved
327 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
328 +|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:30px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:110px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:110px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:140px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**2**
329 +|Value|BAT|(% style="width:196px" %)(((
330 +Temperature(DS18B20)(PC13)
331 +)))|(% style="width:87px" %)(((
332 +ADC(PA4)
333 +)))|(% style="width:189px" %)(((
334 +Digital in(PB15) & Digital Interrupt(PA8)
335 +)))|(% style="width:208px" %)(((
336 +Distance measure by: 1) LIDAR-Lite V3HP
337 +Or 2) Ultrasonic Sensor
338 +)))|(% style="width:117px" %)Reserved
316 316  
317 317  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656324539647-568.png?rev=1.1||alt="1656324539647-568.png"]]
318 318  
319 -**Connection of LIDAR-Lite V3HP:**
320 320  
321 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656324581381-162.png?rev=1.1||alt="1656324581381-162.png"]]
343 +(% style="color:blue" %)**Connection of LIDAR-Lite V3HP:**
322 322  
323 -**Connection to Ultrasonic Sensor:**
345 +[[image:image-20230512173758-5.png||height="563" width="712"]]
324 324  
325 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656324598488-204.png?rev=1.1||alt="1656324598488-204.png"]]
326 326  
348 +(% style="color:blue" %)**Connection to Ultrasonic Sensor:**
349 +
350 +(% style="color:red" %)**Need to remove R1 and R2 resistors to get low power,otherwise there will be 240uA standby current.**
351 +
352 +[[image:image-20230512173903-6.png||height="596" width="715"]]
353 +
354 +
327 327  For the connection to TF-Mini or TF-Luna , MOD2 payload is as below:
328 328  
329 -|**Size(bytes)**|**2**|**2**|**1**|**2**|**2**|**2**
330 -|**Value**|BAT|(((
331 -Temperature(DS18B20)
332 -)))|Digital in & Digital Interrupt|ADC|(((
357 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
358 +|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:20px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:120px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:80px" %)**2**
359 +|Value|BAT|(% style="width:183px" %)(((
360 +Temperature(DS18B20)(PC13)
361 +)))|(% style="width:173px" %)(((
362 +Digital in(PB15) & Digital Interrupt(PA8)
363 +)))|(% style="width:84px" %)(((
364 +ADC(PA4)
365 +)))|(% style="width:323px" %)(((
333 333  Distance measure by:1)TF-Mini plus LiDAR
334 -Or 
335 -2) TF-Luna LiDAR
336 -)))|Distance signal  strength
367 +Or 2) TF-Luna LiDAR
368 +)))|(% style="width:188px" %)Distance signal  strength
337 337  
338 338  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656376779088-686.png?rev=1.1||alt="1656376779088-686.png"]]
339 339  
372 +
340 340  **Connection to [[TF-Mini plus>>url:http://en.benewake.com/product/detail/5c345cd0e5b3a844c472329b.html]] LiDAR(UART version):**
341 341  
342 -Need to remove R3 and R4 resistors to get low power. Since firmware v1.7.0
375 +(% style="color:red" %)**Need to remove R3 and R4 resistors to get low power,otherwise there will be 400uA standby current.**
343 343  
344 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656376795715-436.png?rev=1.1||alt="1656376795715-436.png"]]
377 +[[image:image-20230512180609-7.png||height="555" width="802"]]
345 345  
379 +
346 346  **Connection to [[TF-Luna>>url:http://en.benewake.com/product/detail/5e1c1fd04d839408076b6255.html]] LiDAR (UART version):**
347 347  
348 -Need to remove R3 and R4 resistors to get low power. Since firmware v1.7.0
382 +(% style="color:red" %)**Need to remove R3 and R4 resistors to get low power,otherwise there will be 400uA standby current.**
349 349  
350 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656376865561-355.png?rev=1.1||alt="1656376865561-355.png"]]
384 +[[image:image-20230610170047-1.png||height="452" width="799"]]
351 351  
352 -Please use firmware version > 1.6.5 when use MOD=2, in this firmware version, user can use LSn50 v1 to power the ultrasonic sensor directly and with low power consumption.
353 353  
354 -=== 2.3.3 MOD~=3 (3 ADC + I2C) ===
387 +==== 2.3.2.3  MOD~=3 (3 ADC + I2C) ====
355 355  
389 +
356 356  This mode has total 12 bytes. Include 3 x ADC + 1x I2C
357 357  
358 -|=(((
392 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
393 +|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
359 359  **Size(bytes)**
360 -)))|=**2**|=**2**|=**2**|=**1**|=2|=2|=1
361 -|**Value**|ADC(Pin PA0)|ADC2(PA1)|ADC3 (PA4)|(((
362 -Digital in(PA12)&Digital Interrupt1(PB14)
363 -)))|Temperature（SHT20 or SHT31 or BH1750 Illumination Sensor）|Humidity（SHT20 or SHT31)|Bat
395 +)))|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 110px;background-color:#D9E2F3;color:#0070C0" %)2|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)2|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)1
396 +|Value|(% style="width:68px" %)(((
397 +ADC1(PA4)
398 +)))|(% style="width:75px" %)(((
399 +ADC2(PA5)
400 +)))|(((
401 +ADC3(PA8)
402 +)))|(((
403 +Digital Interrupt(PB15)
404 +)))|(% style="width:304px" %)(((
405 +Temperature(SHT20 or SHT31 or BH1750 Illumination Sensor)
406 +)))|(% style="width:163px" %)(((
407 +Humidity(SHT20 or SHT31)
408 +)))|(% style="width:53px" %)Bat
364 364  
365 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656377431497-975.png?rev=1.1||alt="1656377431497-975.png"]]
410 +[[image:image-20230513110214-6.png]]
366 366  
367 -=== 2.3.4 MOD~=4 (3 x DS18B20) ===
368 368  
369 -This mode is supported in firmware version since v1.6.1. Software set to AT+MOD=4
413 +==== 2.3.2.4 MOD~=4 (3 x DS18B20) ====
370 370  
371 -Hardware connection is as below,
372 372  
373 -**( Note:**
374 -
375 -* In hardware version v1.x and v2.0 , R3 & R4 should change from 10k to 4.7k ohm to support the other 2 x DS18B20 probes.
376 -* In hardware version v2.1 no need to change R3 , R4, by default, they are 4.7k ohm already.
377 -
378 -See [[here>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H1.6A0HardwareChangelog]] for hardware changelog. **) **
379 -
380 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656377461619-156.png?rev=1.1||alt="1656377461619-156.png"]]
381 -
382 382  This mode has total 11 bytes. As shown below:
383 383  
384 -|**Size(bytes)**|**2**|**2**|**2**|**1**|**2**|**2**
385 -|**Value**|BAT|(((
386 -Temperature1
387 -(DS18B20)
388 -(PB3)
389 -)))|ADC|Digital in & Digital Interrupt|Temperature2
390 -(DS18B20)
391 -(PA9)|Temperature3
392 -(DS18B20)
393 -(PA10)
418 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
419 +|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:20px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**
420 +|Value|BAT|(% style="width:186px" %)(((
421 +Temperature1(DS18B20)(PC13)
422 +)))|(% style="width:82px" %)(((
423 +ADC(PA4)
424 +)))|(% style="width:210px" %)(((
425 +Digital in(PB15) & Digital Interrupt(PA8) 
426 +)))|(% style="width:191px" %)Temperature2(DS18B20)
427 +(PB9)|(% style="width:183px" %)Temperature3(DS18B20)(PB8)
394 394  
395 395  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656377606181-607.png?rev=1.1||alt="1656377606181-607.png"]]
396 396  
397 -=== 2.3.5 MOD~=5(Weight Measurement by HX711) ===
398 398  
399 -This mode is supported in firmware version since v1.6.2. Please use v1.6.5 firmware version so user no need to use extra LDO for connection.
432 +[[image:image-20230513134006-1.png||height="559" width="736"]]
400 400  
401 401  
402 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656378224664-860.png?rev=1.1||alt="1656378224664-860.png"]]
435 +==== 2.3.2.5  MOD~=5(Weight Measurement by HX711) ====
403 403  
437 +
438 +[[image:image-20230512164658-2.png||height="532" width="729"]]
439 +
404 404  Each HX711 need to be calibrated before used. User need to do below two steps:
405 405  
406 -1. Zero calibration. Don't put anything on load cell and run **AT+WEIGRE** to calibrate to Zero gram.
407 -1. Adjust calibration factor (default value 400): Put a known weight thing on load cell and run **AT+WEIGAP** to adjust the Calibration Factor.
442 +1. Zero calibration. Don't put anything on load cell and run (% style="color:blue" %)**AT+WEIGRE**(%%) to calibrate to Zero gram.
443 +1. Adjust calibration factor (default value 400): Put a known weight thing on load cell and run (% style="color:blue" %)**AT+WEIGAP**(%%) to adjust the Calibration Factor.
408 408  1. (((
409 -Remove the limit of plus or minus 5Kg in mode 5, and expand from 2 bytes to 4 bytes, the unit is g.(Since v1.8.0)
445 +Weight has 4 bytes, the unit is g.
446 +
447 +
448 +
410 410  )))
411 411  
412 412  For example:
413 413  
414 -**AT+WEIGAP =403.0**
453 +(% style="color:blue" %)**AT+GETSENSORVALUE =0**
415 415  
416 416  Response:  Weight is 401 g
417 417  
418 418  Check the response of this command and adjust the value to match the real value for thing.
419 419  
420 -|=(((
459 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
460 +|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
421 421  **Size(bytes)**
422 -)))|=**2**|=**2**|=**2**|=**1**|=**4**|=2
423 -|**Value**|[[Bat>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.1BatteryInfo]]|[[Temperature(DS18B20)>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.2Temperature28DS18B2029]]|[[ADC>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.4AnalogueDigitalConverter28ADC29]]|[[Digital Input and Digitak Interrupt>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.3DigitalInput]]|Weight|Reserved
462 +)))|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 150px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 200px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**4**
463 +|Value|BAT|(% style="width:193px" %)(((
464 +Temperature(DS18B20)(PC13)
465 +)))|(% style="width:85px" %)(((
466 +ADC(PA4)
467 +)))|(% style="width:186px" %)(((
468 +Digital in(PB15) & Digital Interrupt(PA8)
469 +)))|(% style="width:100px" %)Weight
424 424  
425 425  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220820120036-2.png?width=1003&height=469&rev=1.1||alt="image-20220820120036-2.png" height="469" width="1003"]]
426 426  
427 -=== 2.3.6 MOD~=6 (Counting Mode, Since firmware v1.6.5) ===
428 428  
474 +==== 2.3.2.6  MOD~=6 (Counting Mode) ====
475 +
476 +
429 429  In this mode, the device will work in counting mode. It counts the interrupt on the interrupt pins and sends the count on TDC time.
430 430  
431 431  Connection is as below. The PIR sensor is a count sensor, it will generate interrupt when people come close or go away. User can replace the PIR sensor with other counting sensors.
432 432  
433 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656378351863-572.png?rev=1.1||alt="1656378351863-572.png"]]
481 +[[image:image-20230512181814-9.png||height="543" width="697"]]
434 434  
435 -**Note:** LoRaWAN wireless transmission will infect the PIR sensor. Which cause the counting value increase +1 for every uplink. User can change PIR sensor or put sensor away of the LSN50 to avoid this happen.
436 436  
437 -|=**Size(bytes)**|=**2**|=**2**|=**2**|=**1**|=**4**
438 -|**Value**|[[BAT>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.1BatteryInfo]]|(((
439 -[[Temperature(DS18B20)>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.2Temperature28DS18B2029]]
440 -)))|[[ADC>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.4AnalogueDigitalConverter28ADC29]]|[[Digital in>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.3DigitalInput]]|Count
484 +(% style="color:red" %)**Note:** **LoRaWAN wireless transmission will infect the PIR sensor. Which cause the counting value increase +1 for every uplink. User can change PIR sensor or put sensor away of the SN50_v3 to avoid this happen.**
441 441  
486 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
487 +|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)**Size(bytes)**|=(% style="width: 40px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 180px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 80px;background-color:#D9E2F3;color:#0070C0" %)**4**
488 +|Value|BAT|(% style="width:256px" %)(((
489 +Temperature(DS18B20)(PC13)
490 +)))|(% style="width:108px" %)(((
491 +ADC(PA4)
492 +)))|(% style="width:126px" %)(((
493 +Digital in(PB15)
494 +)))|(% style="width:145px" %)(((
495 +Count(PA8)
496 +)))
497 +
442 442  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656378441509-171.png?rev=1.1||alt="1656378441509-171.png"]]
443 443  
444 -=== 2.3.7  MOD~=7 Three interrupt contact modes (the hardware version needs to support three interrupt versions, Since firmware v1.8.0) ===
445 445  
446 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220820140109-3.png?rev=1.1||alt="image-20220820140109-3.png"]]
501 +==== 2.3.2.7  MOD~=7 (Three interrupt contact modes) ====
447 447  
448 -|=(((
503 +
504 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
505 +|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
449 449  **Size(bytes)**
450 -)))|=**2**|=**2**|=**2**|=**1**|=**1**|=1|=2
451 -|**Value**|BAT|Temperature(DS18B20)|ADC|(((
452 -Digital in(PA12)&Digital Interrupt1(PB14)
453 -)))|Digital Interrupt2(PB15)|Digital Interrupt3(PA4)|Reserved
507 +)))|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)1|=(% style="width: 40px;background-color:#D9E2F3;color:#0070C0" %)2
508 +|Value|BAT|(% style="width:188px" %)(((
509 +Temperature(DS18B20)
510 +(PC13)
511 +)))|(% style="width:83px" %)(((
512 +ADC(PA5)
513 +)))|(% style="width:184px" %)(((
514 +Digital Interrupt1(PA8)
515 +)))|(% style="width:186px" %)Digital Interrupt2(PA4)|(% style="width:197px" %)Digital Interrupt3(PB15)|(% style="width:100px" %)Reserved
454 454  
455 -=== 2.3.8  MOD~=8 （3ADC+1DS18B20, Since firmware v1.8.0） ===
517 +[[image:image-20230513111203-7.png||height="324" width="975"]]
456 456  
457 -|=(((
519 +
520 +==== 2.3.2.8  MOD~=8 （3ADC+1DS18B20） ====
521 +
522 +
523 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
524 +|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
458 458  **Size(bytes)**
459 -)))|=**2**|=**2**|=**2**|=**1**|=**2**|=2
460 -|**Value**|BAT|Temperature(DS18B20)|(((
461 -ADC1(PA0)
462 -)))|(((
463 -Digital in
464 -& Digital Interrupt(PB14)
465 -)))|(((
466 -ADC2(PA1)
467 -)))|(((
468 -ADC3(PA4)
526 +)))|=(% style="width: 30px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 110px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 70px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 120px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 70px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 70px;background-color:#D9E2F3;color:#0070C0" %)2
527 +|Value|BAT|(% style="width:207px" %)(((
528 +Temperature(DS18B20)
529 +(PC13)
530 +)))|(% style="width:94px" %)(((
531 +ADC1(PA4)
532 +)))|(% style="width:198px" %)(((
533 +Digital Interrupt(PB15)
534 +)))|(% style="width:84px" %)(((
535 +ADC2(PA5)
536 +)))|(% style="width:82px" %)(((
537 +ADC3(PA8)
469 469  )))
470 470  
471 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220823164903-2.png?rev=1.1||alt="image-20220823164903-2.png"]]
540 +[[image:image-20230513111231-8.png||height="335" width="900"]]
472 472  
473 -=== 2.3.9  MOD~=9 3DS18B20+ two Interrupt count mode (the hardware version needs to support 3 interrupt versions, Since firmware v1.8.0) ===
474 474  
475 -|=(((
543 +==== 2.3.2.9  MOD~=9 (3DS18B20+ two Interrupt count mode) ====
544 +
545 +
546 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
547 +|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
476 476  **Size(bytes)**
477 -)))|=**2**|=**2**|=**2**|=**1**|=**2**|=4|=4
478 -|**Value**|BAT|(((
479 -Temperature1(PB3)
549 +)))|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)4|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)4
550 +|Value|BAT|(((
551 +Temperature
552 +(DS18B20)(PC13)
480 480  )))|(((
481 -Temperature2(PA9)
554 +Temperature2
555 +(DS18B20)(PB9)
482 482  )))|(((
483 -Digital in
484 -& Digital Interrupt(PA4)
485 -)))|(((
486 -Temperature3(PA10)
487 -)))|(((
488 -Count1(PB14)
489 -)))|(((
490 -Count2(PB15)
557 +Digital Interrupt
558 +(PB15)
559 +)))|(% style="width:193px" %)(((
560 +Temperature3
561 +(DS18B20)(PB8)
562 +)))|(% style="width:78px" %)(((
563 +Count1(PA8)
564 +)))|(% style="width:78px" %)(((
565 +Count2(PA4)
491 491  )))
492 492  
493 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220823165322-3.png?rev=1.1||alt="image-20220823165322-3.png"]]
568 +[[image:image-20230513111255-9.png||height="341" width="899"]]
494 494  
495 -**The newly added AT command is issued correspondingly:**
570 +(% style="color:blue" %)**The newly added AT command is issued correspondingly:**
496 496  
497 -**~ AT+INTMOD1** ** PB14**  pin：  Corresponding downlink:  **06 00 00 xx**
572 +(% style="color:#037691" %)** AT+INTMOD1 PA8**(%%)  pin：  Corresponding downlink:  (% style="color:#037691" %)**06 00 00 xx**
498 498  
499 -**~ AT+INTMOD2**  **PB15** pin：  Corresponding downlink:**  06 00 01 xx**
574 +(% style="color:#037691" %)** AT+INTMOD2 PA4**(%%)  pin：  Corresponding downlink: (% style="color:#037691" %)**06 00 01 xx**
500 500  
501 -**~ AT+INTMOD3**  **PA4**  pin：  Corresponding downlink:  ** 06 00 02 xx**
576 +(% style="color:#037691" %)** AT+INTMOD3 PB15**(%%)  pin：  Corresponding downlink:  (% style="color:#037691" %)** 06 00 02 xx**
502 502  
503 -**AT+SETCNT=aa,bb** 
504 504  
505 -When AA is 1, set the count of PB14 pin to BB Corresponding downlink：09 01 bb bb bb bb
579 +(% style="color:blue" %)**AT+SETCNT=aa,bb** 
506 506  
507 -When AA is 2, set the count of PB15 pin to BB Corresponding downlink：09 02 bb bb bb bb
581 +When AA is 1, set the count of PA8 pin to BB Corresponding downlink：09 01 bb bb bb bb
508 508  
509 -=== 2.3.10  ​Decode payload in The Things Network ===
583 +When AA is 2, set the count of PA4 pin to BB Corresponding downlink：09 02 bb bb bb bb
510 510  
585 +
586 +==== 2.3.2.10  MOD~=10 (PWM input capture and output mode，Since firmware v1.2) ====
587 +
588 +(% style="color:red" %)**Note: Firmware not release, contact Dragino for testing.**
589 +
590 +In this mode, the uplink can perform PWM input capture, and the downlink can perform PWM output.
591 +
592 +[[It should be noted when using PWM mode.>>||anchor="H2.3.3.12A0PWMMOD"]]
593 +
594 +
595 +===== 2.3.2.10.a  Uplink, PWM input capture =====
596 +
597 +
598 +[[image:image-20230817172209-2.png||height="439" width="683"]]
599 +
600 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515px" %)
601 +|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:20px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:135px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:70px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:90px" %)**2**
602 +|Value|Bat|(% style="width:191px" %)(((
603 +Temperature(DS18B20)(PC13)
604 +)))|(% style="width:78px" %)(((
605 +ADC(PA4)
606 +)))|(% style="width:135px" %)(((
607 +PWM_Setting
608 +&Digital Interrupt(PA8)
609 +)))|(% style="width:70px" %)(((
610 +Pulse period
611 +)))|(% style="width:89px" %)(((
612 +Duration of high level
613 +)))
614 +
615 +[[image:image-20230817170702-1.png||height="161" width="1044"]]
616 +
617 +
618 +When the device detects the following PWM signal ,decoder will converts the pulse period and high-level duration to frequency and duty cycle.
619 +
620 +**Frequency：**
621 +
622 +(% class="MsoNormal" %)
623 +(% lang="EN-US" %)If (% style="background-attachment:initial; background-clip:initial; background-image:initial; background-origin:initial; background-position:initial; background-repeat:initial; background-size:initial; color:blue; font-family:Arial,sans-serif" %)**AT+PWMSET**(%%)**=0, **(% lang="EN-US" %)Frequency= 1000000/(%%)Pulse period（HZ）;
624 +
625 +(% class="MsoNormal" %)
626 +(% lang="EN-US" %)If (% style="background-attachment:initial; background-clip:initial; background-image:initial; background-origin:initial; background-position:initial; background-repeat:initial; background-size:initial; color:blue; font-family:Arial,sans-serif" %)**AT+PWMSET**(%%)**=1, **(% lang="EN-US" %)Frequency= 1000/(%%)Pulse period（HZ）;
627 +
628 +
629 +(% class="MsoNormal" %)
630 +**Duty cycle:**
631 +
632 +Duty cycle= Duration of high level/ Pulse period*100 ~(%).
633 +
634 +[[image:image-20230818092200-1.png||height="344" width="627"]]
635 +
636 +===== 2.3.2.10.b  Uplink, PWM output =====
637 +
638 +[[image:image-20230817172209-2.png||height="439" width="683"]]
639 +
640 +(% style="background-attachment:initial; background-clip:initial; background-image:initial; background-origin:initial; background-position:initial; background-repeat:initial; background-size:initial; color:blue; font-family:Arial,sans-serif" %)**AT+PWMOUT=a,b,c**
641 +
642 +a is the time delay of the output, the unit is ms.
643 +
644 +b is the output frequency, the unit is HZ.
645 +
646 +c is the duty cycle of the output, the unit is %.
647 +
648 +(% style="background-attachment:initial; background-clip:initial; background-image:initial; background-origin:initial; background-position:initial; background-repeat:initial; background-size:initial; color:blue; font-family:Arial,sans-serif" %)**Downlink**(%%):  (% style="color:#037691" %)**0B 01 bb cc aa **
649 +
650 +aa is the time delay of the output, the unit is ms.
651 +
652 +bb is the output frequency, the unit is HZ.
653 +
654 +cc is the duty cycle of the output, the unit is %.
655 +
656 +
657 +For example, send a AT command: AT+PWMOUT=65535,1000,50  The PWM is always out, the frequency is 1000HZ, and the duty cycle is 50.
658 +
659 +The oscilloscope displays as follows:
660 +
661 +[[image:image-20231213102404-1.jpeg||height="780" width="932"]]
662 +
663 +
664 +===== 2.3.2.10.c  Downlink, PWM output =====
665 +
666 +
667 +[[image:image-20230817173800-3.png||height="412" width="685"]]
668 +
669 +Downlink:  (% style="color:#037691" %)**0B xx xx xx yy zz zz**
670 +
671 + xx xx xx is the output frequency, the unit is HZ.
672 +
673 + yy is the duty cycle of the output, the unit is %.
674 +
675 + zz zz is the time delay of the output, the unit is ms.
676 +
677 +
678 +For example, send a downlink command: 0B 00 61 A8 32 13 88, the frequency is 25KHZ, the duty cycle is 50, and the output time is 5 seconds.
679 +
680 +The oscilloscope displays as follows:
681 +
682 +[[image:image-20230817173858-5.png||height="694" width="921"]]
683 +
684 +
685 +=== 2.3.3  ​Decode payload ===
686 +
687 +
511 511  While using TTN V3 network, you can add the payload format to decode the payload.
512 512  
513 513  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656378466788-734.png?rev=1.1||alt="1656378466788-734.png"]]
... ... @@ -514,41 +514,33 @@
514 514  
515 515  The payload decoder function for TTN V3 are here:
516 516  
517 -LSN50 TTN V3 Payload Decoder:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>url:https://github.com/dragino/dragino-end-node-decoder]]
694 +SN50v3-LB TTN V3 Payload Decoder:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>url:https://github.com/dragino/dragino-end-node-decoder]]
518 518  
519 519  
520 -Sensor Data is uplink via FPORT=2
697 +==== 2.3.3.1 Battery Info ====
521 521  
522 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
523 -|=(% style="width: 90px;background-color:#D9E2F3" %)(((
524 -**Size(bytes)**
525 -)))|=(% style="width: 80px;background-color:#D9E2F3" %)2|=(% style="width: 90px;background-color:#D9E2F3" %)4|=(% style="width:80px;background-color:#D9E2F3" %)1|=(% style="width: 80px;background-color:#D9E2F3" %)**2**|=(% style="width: 80px;background-color:#D9E2F3" %)2
526 -|(% style="width:99px" %)**Value**|(% style="width:69px" %)(((
527 -[[Battery>>||anchor="HBattery:"]]
528 -)))|(% style="width:130px" %)(((
529 -[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
530 -)))|(% style="width:91px" %)(((
531 -[[Alarm Flag>>||anchor="HAlarmFlag26MOD:"]]
532 -)))|(% style="width:103px" %)(((
533 -[[Temperature>>||anchor="HTemperature:"]]
534 -)))|(% style="width:80px" %)(((
535 -[[Humidity>>||anchor="HHumidity:"]]
536 -)))
537 537  
538 -==== (% style="color:#4472c4" %)**Battery**(%%) ====
700 +Check the battery voltage for SN50v3-LB.
539 539  
540 -Sensor Battery Level.
541 -
542 542  Ex1: 0x0B45 = 2885mV
543 543  
544 544  Ex2: 0x0B49 = 2889mV
545 545  
546 546  
707 +==== 2.3.3.2  Temperature (DS18B20) ====
547 547  
548 -==== (% style="color:#4472c4" %)**Temperature**(%%) ====
549 549  
550 -**Example**:
710 +If there is a DS18B20 connected to PC13 pin. The temperature will be uploaded in the payload.
551 551  
712 +More DS18B20 can check the [[3 DS18B20 mode>>||anchor="H2.3.2.4MOD3D4283xDS18B2029"]]
713 +
714 +(% style="color:blue" %)**Connection:**
715 +
716 +[[image:image-20230512180718-8.png||height="538" width="647"]]
717 +
718 +
719 +(% style="color:blue" %)**Example**:
720 +
552 552  If payload is: 0105H:  (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
553 553  
554 554  If payload is: FF3FH :  (FF3F & 8000 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
... ... @@ -556,195 +556,261 @@
556 556  （FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
557 557  
558 558  
559 -==== (% style="color:#4472c4" %)**Humidity**(%%) ====
728 +==== 2.3.3.3 Digital Input ====
560 560  
561 561  
562 -Read:0x(0197)=412    Value:  412 / 10=41.2, So 41.2%
731 +The digital input for pin PB15,
563 563  
733 +* When PB15 is high, the bit 1 of payload byte 6 is 1.
734 +* When PB15 is low, the bit 1 of payload byte 6 is 0.
564 564  
565 -==== (% style="color:#4472c4" %)**Alarm Flag& MOD**(%%) ====
736 +(% class="wikigeneratedid" id="H2.3.3.4A0AnalogueDigitalConverter28ADC29" %)
737 +(((
738 +When the digital interrupt pin is set to AT+INTMODx=0, this pin is used as a digital input pin.
566 566  
740 +(% style="color:red" %)**Note: The maximum voltage input supports 3.6V.**
567 567  
568 -**Example:**
742 +
743 +)))
569 569  
570 -If payload & 0x01 = 0x01  **~-~->** This is an Alarm Message
745 +==== 2.3.3.4  Analogue Digital Converter (ADC) ====
571 571  
572 -If payload & 0x01 = 0x00  **~-~->** This is a normal uplink message, no alarm
573 573  
574 -If payload >> 2 = 0x00  **~-~->**  means MOD=1, This is a sampling uplink message
748 +The measuring range of the ADC is only about 0.1V to 1.1V The voltage resolution is about 0.24mv.
575 575  
576 -If payload >> 2 = 0x31  **~-~->**  means MOD=31, this message is a reply message for polling, this message contains the alarm settings. see [[this link>>path:#HPolltheAlarmsettings:]] for detail. 
750 +When the measured output voltage of the sensor is not within the range of 0.1V and 1.1V, the output voltage terminal of the sensor shall be divided The example in the following figure is to reduce the output voltage of the sensor by three times If it is necessary to reduce more times, calculate according to the formula in the figure and connect the corresponding resistance in series.
577 577  
752 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220628150112-1.png?width=285&height=241&rev=1.1||alt="image-20220628150112-1.png" height="241" width="285"]]
578 578  
579 -== 2.4 Payload Decoder file ==
580 580  
755 +(% style="color:red" %)**Note: If the ADC type sensor needs to be powered by SN50_v3, it is recommended to use +5V to control its switch.Only sensors with low power consumption can be powered with VDD.**
581 581  
582 -In TTN, use can add a custom payload so it shows friendly reading
583 583  
584 -In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from:
758 +The position of PA5 on the hardware after **LSN50 v3.3** is changed to the position shown in the figure below, and the collected voltage becomes one-sixth of the original.
585 585  
586 -[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/LSN50v2-S31%26S31B >>https://github.com/dragino/dragino-end-node-decoder/tree/main/LSN50v2-S31%26S31B]]
760 +[[image:image-20230811113449-1.png||height="370" width="608"]]
587 587  
762 +==== 2.3.3.5 Digital Interrupt ====
588 588  
589 -== 2.5 Datalog Feature ==
590 590  
765 +Digital Interrupt refers to pin PA8, and there are different trigger methods. When there is a trigger, the SN50v3-LB will send a packet to the server.
591 591  
592 -Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, S31x-LB will store the reading for future retrieving purposes.
767 +(% style="color:blue" %)** Interrupt connection method:**
593 593  
769 +[[image:image-20230513105351-5.png||height="147" width="485"]]
594 594  
595 -=== 2.5.1 Ways to get datalog via LoRaWAN ===
596 596  
772 +(% style="color:blue" %)**Example to use with door sensor :**
597 597  
598 -Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayloadA028FPORT3D329"]], S31x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
774 +The door sensor is shown at right. It is a two wire magnetic contact switch used for detecting the open/close status of doors or windows.
599 599  
600 -* a) S31x-LB will do an ACK check for data records sending to make sure every data arrive server.
601 -* b) S31x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB gets a ACK, S31x-LB will consider there is a network connection and resend all NONE-ACK messages.
776 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379210849-860.png?rev=1.1||alt="1656379210849-860.png"]]
602 602  
603 -Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
778 +When the two pieces are close to each other, the 2 wire output will be short or open (depending on the type), while if the two pieces are away from each other, the 2 wire output will be the opposite status. So we can use SN50v3-LB interrupt interface to detect the status for the door or window.
604 604  
605 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
606 606  
607 -=== 2.5.2 Unix TimeStamp ===
781 +(% style="color:blue" %)**Below is the installation example:**
608 608  
783 +Fix one piece of the magnetic sensor to the door and connect the two pins to SN50v3-LB as follows:
609 609  
610 -S31x-LB uses Unix TimeStamp format based on
785 +* (((
786 +One pin to SN50v3-LB's PA8 pin
787 +)))
788 +* (((
789 +The other pin to SN50v3-LB's VDD pin
790 +)))
611 611  
612 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
792 +Install the other piece to the door. Find a place where the two pieces will be close to each other when the door is closed. For this particular magnetic sensor, when the door is closed, the output will be short, and PA8 will be at the VCC voltage.
613 613  
614 -User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
794 +Door sensors have two types: (% style="color:blue" %)** NC (Normal close)**(%%) and (% style="color:blue" %)**NO (normal open)**(%%). The connection for both type sensors are the same. But the decoding for payload are reverse, user need to modify this in the IoT Server decoder.
615 615  
616 -Below is the converter example
796 +When door sensor is shorted, there will extra power consumption in the circuit, the extra current is 3v3/R14 = 3v3/1Mohm = 3uA which can be ignored.
617 617  
618 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="图片-20220523001219-12.png" height="298" width="720"]]
798 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379283019-229.png?rev=1.1||alt="1656379283019-229.png"]]
619 619  
620 -So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
800 +The above photos shows the two parts of the magnetic switch fitted to a door.
621 621  
802 +The software by default uses the falling edge on the signal line as an interrupt. We need to modify it to accept both the rising edge (0v ~-~-> VCC , door close) and the falling edge (VCC ~-~-> 0v , door open) as the interrupt.
622 622  
623 -=== 2.5.3 Set Device Time ===
804 +The command is:
624 624  
806 +(% style="color:blue" %)**AT+INTMOD1=1   ** (%%) ~/~/  (more info about INMOD please refer** **[[**AT Command Manual**>>url:http://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/&file=DRAGINO_LSN50_AT_Commands_v1.5.1.pdf]]**. **)
625 625  
626 -User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
808 +Below shows some screen captures in TTN V3:
627 627  
628 -Once S31x-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to S31x-LB. If S31x-LB fails to get the time from the server, S31x-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
810 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379339508-835.png?rev=1.1||alt="1656379339508-835.png"]]
629 629  
630 -(% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
631 631  
813 +In **MOD=1**, user can use byte 6 to see the status for door open or close. TTN V3 decoder is as below:
632 632  
633 -=== 2.5.4 Datalog Uplink payload (FPORT~=3) ===
815 +door= (bytes[6] & 0x80)? "CLOSE":"OPEN";
634 634  
635 635  
636 -The Datalog uplinks will use below payload format.
818 +==== 2.3.3.6 I2C Interface (SHT20 & SHT31) ====
637 637  
638 -**Retrieval data payload:**
639 639  
640 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
641 -|=(% style="width: 80px;background-color:#D9E2F3" %)(((
642 -**Size(bytes)**
643 -)))|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 120px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 103px; background-color: rgb(217, 226, 243);" %)**1**|=(% style="width: 85px; background-color: rgb(217, 226, 243);" %)**4**
644 -|(% style="width:103px" %)**Value**|(% style="width:54px" %)(((
645 -[[Temp_Black>>||anchor="HTemperatureBlack:"]]
646 -)))|(% style="width:51px" %)[[Temp_White>>||anchor="HTemperatureWhite:"]]|(% style="width:89px" %)[[Temp_ Red or Temp _White>>||anchor="HTemperatureREDorTemperatureWhite:"]]|(% style="width:103px" %)Poll message flag & Ext|(% style="width:54px" %)[[Unix Time Stamp>>||anchor="H2.5.2UnixTimeStamp"]]
821 +The SDA and SCK are I2C interface lines. You can use these to connect to an I2C device and get the sensor data.
647 647  
648 -**Poll message flag & Ext:**
823 +We have made an example to show how to use the I2C interface to connect to the SHT20/ SHT31 Temperature and Humidity Sensor.
649 649  
650 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20221006192726-1.png?width=754&height=112&rev=1.1||alt="图片-20221006192726-1.png" height="112" width="754"]]
825 +(% style="color:red" %)**Notice: Different I2C sensors have different I2C commands set and initiate process, if user want to use other I2C sensors, User need to re-write the source code to support those sensors. SHT20/ SHT31 code in SN50v3-LB will be a good reference.**
651 651  
652 -**No ACK Message**:  1: This message means this payload is fromn Uplink Message which doesn't get ACK from the server before ( for **PNACKMD=1** feature)
653 653  
654 -**Poll Message Flag**: 1: This message is a poll message reply.
828 +Below is the connection to SHT20/ SHT31. The connection is as below:
655 655  
656 -* Poll Message Flag is set to 1.
830 +[[image:image-20230610170152-2.png||height="501" width="846"]]
657 657  
658 -* Each data entry is 11 bytes, to save airtime and battery, devices will send max bytes according to the current DR and Frequency bands.
659 659  
660 -For example, in US915 band, the max payload for different DR is:
833 +The device will be able to get the I2C sensor data now and upload to IoT Server.
661 661  
662 -**a) DR0:** max is 11 bytes so one entry of data
835 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379664142-345.png?rev=1.1||alt="1656379664142-345.png"]]
663 663  
664 -**b) DR1:** max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
837 +Convert the read byte to decimal and divide it by ten.
665 665  
666 -**c) DR2:** total payload includes 11 entries of data
839 +**Example:**
667 667  
668 -**d) DR3: **total payload includes 22 entries of data.
841 +Temperature:  Read:0116(H) = 278(D)  Value:  278 /10=27.8℃;
669 669  
670 -If devise doesn't have any data in the polling time. Device will uplink 11 bytes of 0   
843 +Humidity:    Read:0248(H)=584(D)  Value:  584 / 10=58.4, So 58.4%
671 671  
845 +If you want to use other I2C device, please refer the SHT20 part source code as reference.
672 672  
847 +
848 +==== 2.3.3.7  ​Distance Reading ====
849 +
850 +
851 +Refer [[Ultrasonic Sensor section>>||anchor="H2.3.3.8UltrasonicSensor"]].
852 +
853 +
854 +==== 2.3.3.8 Ultrasonic Sensor ====
855 +
856 +
857 +This Fundamental Principles of this sensor can be found at this link: [[https:~~/~~/wiki.dfrobot.com/Weather_-_proof_Ultrasonic_Sensor_with_Separate_Probe_SKU~~_~~__SEN0208>>url:https://wiki.dfrobot.com/Weather_-_proof_Ultrasonic_Sensor_with_Separate_Probe_SKU___SEN0208]]
858 +
859 +The SN50v3-LB detects the pulse width of the sensor and converts it to mm output. The accuracy will be within 1 centimeter. The usable range (the distance between the ultrasonic probe and the measured object) is between 24cm and 600cm.
860 +
861 +The working principle of this sensor is similar to the (% style="color:blue" %)**HC-SR04**(%%) ultrasonic sensor.
862 +
863 +The picture below shows the connection:
864 +
865 +[[image:image-20230512173903-6.png||height="596" width="715"]]
866 +
867 +
868 +Connect to the SN50v3-LB and run (% style="color:blue" %)**AT+MOD=2**(%%) to switch to ultrasonic mode (ULT).
869 +
870 +The ultrasonic sensor uses the 8^^th^^ and 9^^th^^ byte for the measurement value.
871 +
673 673  **Example:**
674 674  
675 -If S31x-LB has below data inside Flash:
874 +Distance:  Read: 0C2D(Hex) = 3117(D)  Value:  3117 mm=311.7 cm
676 676  
677 -[[image:1682646494051-944.png]]
678 678  
679 -If user sends below downlink command: 3160065F9760066DA705
877 +==== 2.3.3.9  Battery Output - BAT pin ====
680 680  
681 -Where : Start time: 60065F97 = time 21/1/19 04:27:03
682 682  
683 - Stop time: 60066DA7= time 21/1/19 05:27:03
880 +The BAT pin of SN50v3-LB is connected to the Battery directly. If users want to use BAT pin to power an external sensor. User need to make sure the external sensor is of low power consumption. Because the BAT pin is always open. If the external sensor is of high power consumption. the battery of SN50v3-LB will run out very soon.
684 684  
685 685  
686 -**S31x-LB will uplink this payload.**
883 +==== 2.3.3.10  +5V Output ====
687 687  
688 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-13.png?width=727&height=421&rev=1.1||alt="图片-20220523001219-13.png" height="421" width="727"]]
689 689  
690 -(((
691 -__**7FFF089801464160065F97**__ **__7FFF__ __088E__ __014B__ __41__ __60066009__** 7FFF0885014E41600660667FFF0875015141600662BE7FFF086B015541600665167FFF08660155416006676E7FFF085F015A41600669C67FFF0857015D4160066C1E
692 -)))
886 +SN50v3-LB will enable +5V output before all sampling and disable the +5v after all sampling. 
693 693  
694 -(((
695 -Where the first 11 bytes is for the first entry:
696 -)))
888 +The 5V output time can be controlled by AT Command.
697 697  
698 -(((
699 -7FFF089801464160065F97
700 -)))
890 +(% style="color:blue" %)**AT+5VT=1000**
701 701  
702 -(((
703 -**Ext sensor data**=0x7FFF/100=327.67
704 -)))
892 +Means set 5V valid time to have 1000ms. So the real 5V output will actually have 1000ms + sampling time for other sensors.
705 705  
706 -(((
707 -**Temp**=0x088E/100=22.00
708 -)))
894 +By default the **AT+5VT=500**. If the external sensor which require 5v and require more time to get stable state, user can use this command to increase the power ON duration for this sensor.
709 709  
710 -(((
711 -**Hum**=0x014B/10=32.6
896 +
897 +==== 2.3.3.11  BH1750 Illumination Sensor ====
898 +
899 +
900 +MOD=1 support this sensor. The sensor value is in the 8^^th^^ and 9^^th^^ bytes.
901 +
902 +[[image:image-20230512172447-4.png||height="416" width="712"]]
903 +
904 +
905 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220628110012-12.png?rev=1.1||alt="image-20220628110012-12.png" height="361" width="953"]]
906 +
907 +
908 +==== 2.3.3.12  PWM MOD ====
909 +
910 +
911 +* (((
912 +The maximum voltage that the SDA pin of SN50v3 can withstand is 3.6V, and it cannot exceed this voltage value, otherwise the chip may be burned.
712 712  )))
914 +* (((
915 +If the PWM pin connected to the SDA pin cannot maintain a high level when it is not working, you need to remove the resistor R2 or replace it with a resistor with a larger resistance, otherwise a sleep current of about 360uA will be generated. The position of the resistor is shown in the figure below:
916 +)))
713 713  
714 -(((
715 -**poll message flag & Ext**=0x41,means reply data,Ext=1
918 + [[image:image-20230817183249-3.png||height="320" width="417"]]
919 +
920 +* (((
921 +The signal captured by the input should preferably be processed by hardware filtering and then connected in. The software processing method is to capture four values, discard the first captured value, and then take the middle value of the second, third, and fourth captured values.
716 716  )))
923 +* (((
924 +Since the device can only detect a pulse period of 50ms when [[AT+PWMSET=0>>||anchor="H3.3.8PWMsetting"]] (counting in microseconds), it is necessary to change the value of PWMSET according to the frequency of input capture.
925 +)))
926 +* (((
927 +PWM Input allows low power consumption. PWM Output to achieve real-time control, you need to go to class C. Power consumption will not be low.
717 717  
718 -(((
719 -**Unix time** is 0x60066009=1611030423s=21/1/19 04:27:03
929 +For PWM Output Feature, there are two consideration to see if the device can be powered by battery or have to be powered by external DC.
930 +
931 +a) If real-time control output is required, the SN50v3-LB is already operating in class C and an external power supply must be used.
932 +
933 +b) If the output duration is more than 30 seconds, better to use external power source. 
934 +
935 +
936 +
720 720  )))
721 721  
939 +==== 2.3.3.13  Working MOD ====
722 722  
723 -(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的
724 724  
725 -== 2.6 Temperature Alarm Feature ==
942 +The working MOD info is contained in the Digital in & Digital Interrupt byte (7^^th^^ Byte).
726 726  
944 +User can use the 3^^rd^^ ~~ 7^^th^^  bit of this byte to see the working mod:
727 727  
728 -S31x-LB work flow with Alarm feature.
946 +Case 7^^th^^ Byte >> 2 & 0x1f:
729 729  
948 +* 0: MOD1
949 +* 1: MOD2
950 +* 2: MOD3
951 +* 3: MOD4
952 +* 4: MOD5
953 +* 5: MOD6
954 +* 6: MOD7
955 +* 7: MOD8
956 +* 8: MOD9
957 +* 9: MOD10
730 730  
731 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/image-20220623090437-1.png?rev=1.1||alt="图片-20220623090437-1.png"]]
959 +== 2.4 Payload Decoder file ==
732 732  
733 733  
734 -== 2.7 Frequency Plans ==
962 +In TTN, use can add a custom payload so it shows friendly reading
735 735  
964 +In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from:
736 736  
737 -The S31x-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
966 +[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/SN50_v3-LB>>https://github.com/dragino/dragino-end-node-decoder/tree/main/SN50_v3-LB]]
738 738  
968 +
969 +== 2.5 Frequency Plans ==
970 +
971 +
972 +The SN50v3-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
973 +
739 739  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
740 740  
741 741  
742 -= 3. Configure S31x-LB =
977 += 3. Configure SN50v3-LB =
743 743  
744 744  == 3.1 Configure Methods ==
745 745  
746 746  
747 -S31x-LB supports below configure method:
982 +SN50v3-LB supports below configure method:
748 748  
749 749  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
750 750  * AT Command via UART Connection : See [[UART Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
... ... @@ -763,10 +763,10 @@
763 763  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
764 764  
765 765  
766 -== 3.3 Commands special design for S31x-LB ==
1001 +== 3.3 Commands special design for SN50v3-LB ==
767 767  
768 768  
769 -These commands only valid for S31x-LB, as below:
1004 +These commands only valid for SN50v3-LB, as below:
770 770  
771 771  
772 772  === 3.3.1 Set Transmit Interval Time ===
... ... @@ -777,7 +777,7 @@
777 777  (% style="color:blue" %)**AT Command: AT+TDC**
778 778  
779 779  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
780 -|=(% style="width: 156px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3" %)**Function**|=(% style="background-color:#D9E2F3" %)**Response**
1015 +|=(% style="width: 156px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="background-color:#D9E2F3;color:#0070C0" %)**Response**
781 781  |(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
782 782  30000
783 783  OK
... ... @@ -800,118 +800,250 @@
800 800  === 3.3.2 Get Device Status ===
801 801  
802 802  
803 -Send a LoRaWAN downlink to ask device send Alarm settings.
1038 +Send a LoRaWAN downlink to ask the device to send its status.
804 804  
805 -(% style="color:blue" %)**Downlink Payload:  **(%%)0x26 01
1040 +(% style="color:blue" %)**Downlink Payload: 0x26 01**
806 806  
807 -Sensor will upload Device Status via FPORT=5. See payload section for detail.
1042 +Sensor will upload Device Status via **FPORT=5**. See payload section for detail.
808 808  
809 809  
810 -=== 3.3.3 Set Temperature Alarm Threshold ===
1045 +=== 3.3.3 Set Interrupt Mode ===
811 811  
812 -* (% style="color:blue" %)**AT Command:**
813 813  
814 -(% style="color:#037691" %)**AT+SHTEMP=min,max**
1048 +Feature, Set Interrupt mode for GPIO_EXIT.
815 815  
816 -* When min=0, and max≠0, Alarm higher than max
817 -* When min≠0, and max=0, Alarm lower than min
818 -* When min≠0 and max≠0, Alarm higher than max or lower than min
1050 +(% style="color:blue" %)**AT Command: AT+INTMOD1，AT+INTMOD2，AT+INTMOD3**
819 819  
820 -Example:
1052 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1053 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1054 +|(% style="width:154px" %)AT+INTMOD1=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
1055 +0
1056 +OK
1057 +the mode is 0 =Disable Interrupt
1058 +)))
1059 +|(% style="width:154px" %)AT+INTMOD1=2|(% style="width:196px" %)(((
1060 +Set Transmit Interval
1061 +0. (Disable Interrupt),
1062 +~1. (Trigger by rising and falling edge)
1063 +2. (Trigger by falling edge)
1064 +3. (Trigger by rising edge)
1065 +)))|(% style="width:157px" %)OK
1066 +|(% style="width:154px" %)AT+INTMOD2=3|(% style="width:196px" %)(((
1067 +Set Transmit Interval
1068 +trigger by rising edge.
1069 +)))|(% style="width:157px" %)OK
1070 +|(% style="width:154px" %)AT+INTMOD3=0|(% style="width:196px" %)Disable Interrupt|(% style="width:157px" %)OK
821 821  
822 - AT+SHTEMP=0,30   ~/~/ Alarm when temperature higher than 30.
1072 +(% style="color:blue" %)**Downlink Command: 0x06**
823 823  
824 -* (% style="color:blue" %)**Downlink Payload:**
1074 +Format: Command Code (0x06) followed by 3 bytes.
825 825  
826 -(% style="color:#037691" %)**0x(0C 01 00 1E)**  (%%) ~/~/ Set AT+SHTEMP=0,30
1076 +This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
827 827  
828 -(% style="color:red" %)**(note: 3^^rd^^ byte= 0x00 for low limit(not set), 4^^th^^ byte = 0x1E for high limit: 30)**
1078 +* Example 1: Downlink Payload: 06000000  **~-~-->**  AT+INTMOD1=0
1079 +* Example 2: Downlink Payload: 06000003  **~-~-->**  AT+INTMOD1=3
1080 +* Example 3: Downlink Payload: 06000102  **~-~-->**  AT+INTMOD2=2
1081 +* Example 4: Downlink Payload: 06000201  **~-~-->**  AT+INTMOD3=1
829 829  
1083 +=== 3.3.4 Set Power Output Duration ===
830 830  
831 -=== 3.3.4 Set Humidity Alarm Threshold ===
832 832  
833 -* (% style="color:blue" %)**AT Command:**
1086 +Control the output duration 5V . Before each sampling, device will
834 834  
835 -(% style="color:#037691" %)**AT+SHHUM=min,max**
1088 +~1. first enable the power output to external sensor,
836 836  
837 -* When min=0, and max≠0, Alarm higher than max
838 -* When min≠0, and max=0, Alarm lower than min
839 -* When min≠0 and max≠0, Alarm higher than max or lower than min
1090 +2. keep it on as per duration, read sensor value and construct uplink payload
840 840  
841 -Example:
1092 +3. final, close the power output.
842 842  
843 - AT+SHHUM=70,0  ~/~/ Alarm when humidity lower than 70%.
1094 +(% style="color:blue" %)**AT Command: AT+5VT**
844 844  
845 -* (% style="color:blue" %)**Downlink Payload:**
1096 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1097 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1098 +|(% style="width:154px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:157px" %)(((
1099 +500(default)
1100 +OK
1101 +)))
1102 +|(% style="width:154px" %)AT+5VT=1000|(% style="width:196px" %)(((
1103 +Close after a delay of 1000 milliseconds.
1104 +)))|(% style="width:157px" %)OK
846 846  
847 -(% style="color:#037691" %)**0x(0C 02 46 00)**(%%)  ~/~/ Set AT+SHTHUM=70,0
1106 +(% style="color:blue" %)**Downlink Command: 0x07**
848 848  
849 -(% style="color:red" %)**(note: 3^^rd^^ byte= 0x46 for low limit (70%), 4^^th^^ byte = 0x00 for high limit (not set))**
1108 +Format: Command Code (0x07) followed by 2 bytes.
850 850  
1110 +The first and second bytes are the time to turn on.
851 851  
852 -=== 3.3.5 Set Alarm Interval ===
1112 +* Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
1113 +* Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
853 853  
854 -The shortest time of two Alarm packet. (unit: min)
1115 +=== 3.3.5 Set Weighing parameters ===
855 855  
856 -* (% style="color:blue" %)**AT Command:**
857 857  
858 -(% style="color:#037691" %)**AT+ATDC=30** (%%) ~/~/ The shortest interval of two Alarm packets is 30 minutes, Means is there is an alarm packet uplink, there won't be another one in the next 30 minutes.
1118 +Feature: Working mode 5 is effective, weight initialization and weight factor setting of HX711.
859 859  
860 -* (% style="color:blue" %)**Downlink Payload:**
1120 +(% style="color:blue" %)**AT Command: AT+WEIGRE,AT+WEIGAP**
861 861  
862 -(% style="color:#037691" %)**0x(0D 00 1E)**(%%)     **~-~--> ** Set AT+ATDC=0x 00 1E = 30 minutes
1122 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1123 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1124 +|(% style="width:154px" %)AT+WEIGRE|(% style="width:196px" %)Weight is initialized to 0.|(% style="width:157px" %)OK
1125 +|(% style="width:154px" %)AT+WEIGAP=？|(% style="width:196px" %)400.0|(% style="width:157px" %)OK(default)
1126 +|(% style="width:154px" %)AT+WEIGAP=400.3|(% style="width:196px" %)Set the factor to 400.3.|(% style="width:157px" %)OK
863 863  
1128 +(% style="color:blue" %)**Downlink Command: 0x08**
864 864  
865 -=== 3.3.6 Get Alarm settings ===
1130 +Format: Command Code (0x08) followed by 2 bytes or 4 bytes.
866 866  
1132 +Use AT+WEIGRE when the first byte is 1, only 1 byte. When it is 2, use AT+WEIGAP, there are 3 bytes.
867 867  
868 -Send a LoRaWAN downlink to ask device send Alarm settings.
1134 +The second and third bytes are multiplied by 10 times to be the AT+WEIGAP value.
869 869  
870 -* (% style="color:#037691" %)**Downlink Payload:  **(%%)0x0E 01
1136 +* Example 1: Downlink Payload: 0801  **~-~-->**  AT+WEIGRE
1137 +* Example 2: Downlink Payload: 08020FA3  **~-~-->**  AT+WEIGAP=400.3
1138 +* Example 3: Downlink Payload: 08020FA0  **~-~-->**  AT+WEIGAP=400.0
871 871  
872 -**Example:**
1140 +=== 3.3.6 Set Digital pulse count value ===
873 873  
874 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/1655948182791-225.png?rev=1.1||alt="1655948182791-225.png"]]
875 875  
1143 +Feature: Set the pulse count value.
876 876  
877 -**Explain:**
1145 +Count 1 is PA8 pin of mode 6 and mode 9. Count 2 is PA4 pin of mode 9.
878 878  
879 -* Alarm & MOD bit is 0x7C, 0x7C >> 2 = 0x31: Means this message is the Alarm settings message.
1147 +(% style="color:blue" %)**AT Command: AT+SETCNT**
880 880  
881 -=== 3.3.7 Set Interrupt Mode ===
1149 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1150 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1151 +|(% style="width:154px" %)AT+SETCNT=1,100|(% style="width:196px" %)Initialize the count value 1 to 100.|(% style="width:157px" %)OK
1152 +|(% style="width:154px" %)AT+SETCNT=2,0|(% style="width:196px" %)Initialize the count value 2 to 0.|(% style="width:157px" %)OK
882 882  
1154 +(% style="color:blue" %)**Downlink Command: 0x09**
883 883  
884 -Feature, Set Interrupt mode for GPIO_EXIT.
1156 +Format: Command Code (0x09) followed by 5 bytes.
885 885  
886 -(% style="color:blue" %)**AT Command: AT+INTMOD**
1158 +The first byte is to select which count value to initialize, and the next four bytes are the count value to be initialized.
887 887  
1160 +* Example 1: Downlink Payload: 090100000000  **~-~-->**  AT+SETCNT=1,0
1161 +* Example 2: Downlink Payload: 0902000003E8  **~-~-->**  AT+SETCNT=2,1000
1162 +
1163 +=== 3.3.7 Set Workmode ===
1164 +
1165 +
1166 +Feature: Switch working mode.
1167 +
1168 +(% style="color:blue" %)**AT Command: AT+MOD**
1169 +
888 888  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
889 -|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
890 -|(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
891 -0
1171 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1172 +|(% style="width:154px" %)AT+MOD=?|(% style="width:196px" %)Get the current working mode.|(% style="width:157px" %)(((
892 892  OK
893 -the mode is 0 =Disable Interrupt
894 894  )))
895 -|(% style="width:154px" %)AT+INTMOD=2|(% style="width:196px" %)(((
896 -Set Transmit Interval
897 -0. (Disable Interrupt),
898 -~1. (Trigger by rising and falling edge)
899 -2. (Trigger by falling edge)
900 -3. (Trigger by rising edge)
901 -)))|(% style="width:157px" %)OK
1175 +|(% style="width:154px" %)AT+MOD=4|(% style="width:196px" %)Set the working mode to 3DS18B20s.|(% style="width:157px" %)(((
1176 +OK
1177 +Attention:Take effect after ATZ
1178 +)))
902 902  
903 -(% style="color:blue" %)**Downlink Command: 0x06**
1180 +(% style="color:blue" %)**Downlink Command: 0x0A**
904 904  
905 -Format: Command Code (0x06) followed by 3 bytes.
1182 +Format: Command Code (0x0A) followed by 1 bytes.
906 906  
907 -This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
1184 +* Example 1: Downlink Payload: 0A01  **~-~-->**  AT+MOD=1
1185 +* Example 2: Downlink Payload: 0A04  **~-~-->**  AT+MOD=4
908 908  
909 -* Example 1: Downlink Payload: 06000000  ~/~/  Turn off interrupt mode
910 -* Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
1187 +(% id="H3.3.8PWMsetting" %)
1188 +=== 3.3.8 PWM setting ===
911 911  
912 -= 4. Battery & Power Consumption =
913 913  
1191 +(% class="mark" %)Feature: Set the time acquisition unit for PWM input capture.
914 914  
1193 +(% style="color:blue" %)**AT Command: AT+PWMSET**
1194 +
1195 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1196 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 223px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Function**|=(% style="width: 130px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Response**
1197 +|(% style="width:154px" %)AT+PWMSET=?|(% style="width:223px" %)0|(% style="width:130px" %)(((
1198 +0(default)
1199 +
1200 +OK
1201 +)))
1202 +|(% style="width:154px" %)AT+PWMSET=0|(% style="width:223px" %)The unit of PWM capture time is microsecond. The capture frequency range is between 20HZ and 100000HZ.   |(% style="width:130px" %)(((
1203 +OK
1204 +
1205 +)))
1206 +|(% style="width:154px" %)AT+PWMSET=1|(% style="width:223px" %)The unit of PWM capture time is millisecond.  The capture frequency range is between 5HZ and 250HZ. |(% style="width:130px" %)OK
1207 +
1208 +(% style="color:blue" %)**Downlink Command: 0x0C**
1209 +
1210 +Format: Command Code (0x0C) followed by 1 bytes.
1211 +
1212 +* Example 1: Downlink Payload: 0C00  **~-~-->**  AT+PWMSET=0
1213 +* Example 2: Downlink Payload: 0C01  **~-~-->**  AT+PWMSET=1
1214 +
1215 +(% class="mark" %)Feature: Set PWM output time, output frequency and output duty cycle.
1216 +
1217 +(% style="color:blue" %)**AT Command: AT+PWMOUT**
1218 +
1219 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1220 +|=(% style="width: 183px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Command Example**|=(% style="width: 193px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Function**|=(% style="width: 137px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Response**
1221 +|(% style="width:183px" %)AT+PWMOUT=?|(% style="width:193px" %)0|(% style="width:137px" %)(((
1222 +0,0,0(default)
1223 +
1224 +OK
1225 +)))
1226 +|(% style="width:183px" %)AT+PWMOUT=0,0,0|(% style="width:193px" %)The default is PWM input detection|(% style="width:137px" %)(((
1227 +OK
1228 +
1229 +)))
1230 +|(% style="width:183px" %)AT+PWMOUT=5,1000,50|(% style="width:193px" %)(((
1231 +The PWM output time is 5ms, the output frequency is 1000HZ, and the output duty cycle is 50%.
1232 +
1233 +
1234 +)))|(% style="width:137px" %)(((
1235 +OK
1236 +)))
1237 +
1238 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1239 +|=(% style="width: 155px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Command Example**|=(% style="width: 112px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Function**|=(% style="width: 242px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**parameters**
1240 +|(% colspan="1" rowspan="3" style="width:155px" %)(((
1241 +AT+PWMOUT=a,b,c
1242 +
1243 +
1244 +)))|(% colspan="1" rowspan="3" style="width:112px" %)(((
1245 +Set PWM output time, output frequency and output duty cycle.
1246 +
1247 +(((
1248 +
1249 +)))
1250 +
1251 +(((
1252 +
1253 +)))
1254 +)))|(% style="width:242px" %)(((
1255 +a: Output time (unit: seconds)
1256 +
1257 +The value ranges from 0 to 65535.
1258 +
1259 +When a=65535, PWM will always output.
1260 +)))
1261 +|(% style="width:242px" %)(((
1262 +b: Output frequency (unit: HZ)
1263 +)))
1264 +|(% style="width:242px" %)(((
1265 +c: Output duty cycle (unit: %)
1266 +
1267 +The value ranges from 0 to 100.
1268 +)))
1269 +
1270 +(% style="color:blue" %)**Downlink Command: 0x0B01**
1271 +
1272 +Format: Command Code (0x0B01) followed by 6 bytes.
1273 +
1274 +Downlink payload：0B01 bb cc aa **~-~--> **AT+PWMOUT=a,b,c
1275 +
1276 +* Example 1: Downlink Payload: 0B01 03E8 0032 0005 **~-~-->**  AT+PWMSET=5,1000,50
1277 +* Example 2: Downlink Payload: 0B01 07D0 003C 000A **~-~-->**  AT+PWMSET=10,2000,60
1278 +
1279 += 4. Battery & Power Cons =
1280 +
1281 +
915 915  SN50v3-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
916 916  
917 917  [[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
... ... @@ -921,24 +921,43 @@
921 921  
922 922  
923 923  (% class="wikigeneratedid" %)
924 -User can change firmware SN50v3-LB to:
1291 +**User can change firmware SN50v3-LB to:**
925 925  
926 926  * Change Frequency band/ region.
927 927  * Update with new features.
928 928  * Fix bugs.
929 929  
930 -Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/kwqv57tp6pejias/AAAopYMATh1GM6fZ-VRCLrpDa?dl=0]]**
1297 +**Firmware and changelog can be downloaded from :** **[[Firmware download link>>https://www.dropbox.com/sh/4rov7bcp6u28exp/AACt-wAySd4si5AXi8DBmvSca?dl=0]]**
931 931  
1299 +**Methods to Update Firmware:**
932 932  
933 -Methods to Update Firmware:
1301 +* (Recommanded way) OTA firmware update via wireless: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**
1302 +* Update through UART TTL interface: **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
934 934  
935 -* (Recommanded way) OTA firmware update via wireless:   [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
936 -* Update through UART TTL interface.**[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
937 -
938 938  = 6. FAQ =
939 939  
1306 +== 6.1 Where can i find source code of SN50v3-LB? ==
940 940  
941 941  
1309 +* **[[Hardware Source Files>>https://github.com/dragino/Lora/tree/master/LSN50/v3.0]].**
1310 +* **[[Software Source Code & Compile instruction>>https://github.com/dragino/SN50v3]].**
1311 +
1312 +== 6.2 How to generate PWM Output in SN50v3-LB? ==
1313 +
1314 +
1315 +See this document: **[[Generate PWM Output on SN50v3>>https://www.dropbox.com/scl/fi/r3trcet2knujg40w0mgyn/Generate-PWM-Output-on-SN50v3.pdf?rlkey=rxsgmrhhrv62iiiwjq9sv10bn&dl=0]]**.
1316 +
1317 +
1318 +== 6.3 How to put several sensors to a SN50v3-LB? ==
1319 +
1320 +
1321 +When we want to put several sensors to A SN50v3-LB, the waterproof at the grand connector will become an issue. User can try to exchange the grand connector to below type.
1322 +
1323 +[[Reference Supplier>>https://www.yscableglands.com/cable-glands/nylon-cable-glands/cable-gland-rubber-seal.html]].
1324 +
1325 +[[image:image-20230810121434-1.png||height="242" width="656"]]
1326 +
1327 +
942 942  = 7. Order Info =
943 943  
944 944  
... ... @@ -964,6 +964,7 @@
964 964  
965 965  = 8. ​Packing Info =
966 966  
1353 +
967 967  (% style="color:#037691" %)**Package Includes**:
968 968  
969 969  * SN50v3-LB LoRaWAN Generic Node
... ... @@ -979,4 +979,5 @@
979 979  
980 980  
981 981  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
982 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
1369 +
1370 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.cc>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.cc]]
image-20230512163509-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +1.5 MB
Content
image-20230512164658-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +2.0 MB
Content
image-20230512170701-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +2.5 MB
Content
image-20230512172447-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +2.0 MB
Content
image-20230512173758-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +2.1 MB
Content
image-20230512173903-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +2.3 MB
Content
image-20230512180609-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +2.3 MB
Content
image-20230512180718-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +2.3 MB
Content
image-20230512181814-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +2.2 MB
Content
image-20230513084523-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +611.3 KB
Content
image-20230513102034-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +607.1 KB
Content
image-20230513103633-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +595.5 KB
Content
image-20230513105207-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +384.7 KB
Content
image-20230513105351-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +37.6 KB
Content
image-20230513110214-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +172.7 KB
Content
image-20230513111203-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +79.9 KB
Content
image-20230513111231-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +64.9 KB
Content
image-20230513111255-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +70.4 KB
Content
image-20230513134006-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +1.9 MB
Content
image-20230515135611-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +948.0 KB
Content
image-20230610162852-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +695.7 KB
Content
image-20230610163213-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +695.4 KB
Content
image-20230610170047-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +444.9 KB
Content
image-20230610170152-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +359.5 KB
Content
image-20230810121434-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +137.3 KB
Content
image-20230811113449-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +973.1 KB
Content
image-20230817170702-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +39.6 KB
Content
image-20230817172209-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +1.3 MB
Content
image-20230817173800-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 MB
Content
image-20230817173830-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +508.5 KB
Content
image-20230817173858-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +1.6 MB
Content
image-20230817183137-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +137.1 KB
Content
image-20230817183218-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +137.1 KB
Content
image-20230817183249-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +948.6 KB
Content
image-20230818092200-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +98.9 KB
Content
image-20231213102404-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.ting
Size
... ... @@ -1,0 +1,1 @@
1 +4.2 MB
Content
image-20231231202945-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +36.3 KB
Content
image-20231231203148-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +35.4 KB
Content
image-20231231203439-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +46.6 KB
Content
image-20240103095513-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +577.4 KB
Content
image-20240103095714-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +230.1 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0