Last modified by Bei Jinggeng on 2025/01/10 15:51
<
From version < 12.1 >
edited by Edwin Chen
on 2023/05/11 23:06
To version < 43.58 >
edited by Xiaoling
on 2023/05/16 16:42
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -SN50v3-LB User Manual
1 +SN50v3-LB LoRaWAN Sensor Node User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Xiaoling
Content
... ... @@ -1,4 +1,5 @@
1 -[[image:image-20230511201248-1.png||height="403" width="489"]]
1 +(% style="text-align:center" %)
2 +[[image:image-20230515135611-1.jpeg||height="589" width="589"]]
2 2  
3 3  
4 4  
... ... @@ -15,23 +15,21 @@
15 15  
16 16  == 1.1 What is SN50v3-LB LoRaWAN Generic Node ==
17 17  
19 +
18 18  (% style="color:blue" %)**SN50V3-LB **(%%)LoRaWAN Sensor Node is a Long Range LoRa Sensor Node. It is designed for outdoor use and powered by (% style="color:blue" %)** 8500mA Li/SOCl2 battery**(%%) for long term use.SN50V3-LB is designed to facilitate developers to quickly deploy industrial level LoRa and IoT solutions. It help users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to program, create and connect your things everywhere.
19 19  
20 -
21 21  (% style="color:blue" %)**SN50V3-LB wireless part**(%%) is based on SX1262 allows the user to send data and reach extremely long ranges at low data-rates.It provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, and so on.
22 22  
23 -
24 24  (% style="color:blue" %)**SN50V3-LB **(%%)has a powerful 48Mhz ARM microcontroller with 256KB flash and 64KB RAM. It has multiplex I/O pins to connect to different sensors.
25 25  
26 -
27 27  (% style="color:blue" %)**SN50V3-LB**(%%) has a built-in BLE module, user can configure the sensor remotely via Mobile Phone. It also support OTA upgrade via private LoRa protocol for easy maintaining.
28 28  
29 -
30 30  SN50V3-LB is the 3^^rd^^ generation of LSN50 series generic sensor node from Dragino. It is an (% style="color:blue" %)**open source project**(%%) and has a mature LoRaWAN stack and application software. User can use the pre-load software for their IoT projects or easily customize the software for different requirements.
31 31  
32 32  
33 33  == 1.2 ​Features ==
34 34  
33 +
35 35  * LoRaWAN 1.0.3 Class A
36 36  * Ultra-low power consumption
37 37  * Open-Source hardware/software
... ... @@ -42,8 +42,11 @@
42 42  * Downlink to change configure
43 43  * 8500mAh Battery for long term use
44 44  
44 +
45 +
45 45  == 1.3 Specification ==
46 46  
48 +
47 47  (% style="color:#037691" %)**Common DC Characteristics:**
48 48  
49 49  * Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
... ... @@ -78,8 +78,11 @@
78 78  * Sleep Mode: 5uA @ 3.3v
79 79  * LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
80 80  
83 +
84 +
81 81  == 1.4 Sleep mode and working mode ==
82 82  
87 +
83 83  (% style="color:blue" %)**Deep Sleep Mode: **(%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
84 84  
85 85  (% style="color:blue" %)**Working Mode:** (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
... ... @@ -104,6 +104,8 @@
104 104  )))
105 105  |(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
106 106  
112 +
113 +
107 107  == 1.6 BLE connection ==
108 108  
109 109  
... ... @@ -122,7 +122,7 @@
122 122  == 1.7 Pin Definitions ==
123 123  
124 124  
125 -[[image:image-20230511203450-2.png||height="443" width="785"]]
132 +[[image:image-20230513102034-2.png]]
126 126  
127 127  
128 128  == 1.8 Mechanical ==
... ... @@ -137,6 +137,7 @@
137 137  
138 138  == Hole Option ==
139 139  
147 +
140 140  SN50v3-LB has different hole size options for different size sensor cable. The options provided are M12, M16 and M20. The definition is as below:
141 141  
142 142  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220627104757-1.png?rev=1.1||alt="image-20220627104757-1.png"]]
... ... @@ -282,232 +282,308 @@
282 282   **AT+MOD=2  ** ~/~/ will set the SN50v3 to work in MOD=2 distance mode which target to measure distance via Ultrasonic Sensor.
283 283  
284 284  
285 -(% style="color:red" %) **Important Notice:** (%%)
293 +(% style="color:red" %) **Important Notice:**
286 286  
287 287  1. Some working modes has payload more than 12 bytes, The US915/AU915/AS923 frequency bands' definition has maximum 11 bytes in **DR0**. Server sides will see NULL payload while SN50v3 transmit in DR0 with 12 bytes payload.
296 +1. All modes share the same Payload Explanation from HERE.
297 +1. By default, the device will send an uplink message every 20 minutes.
288 288  
289 -2. All modes share the same Payload Explanation from HERE.
290 290  
291 -3. By default, the device will send an uplink message every 20 minutes.
292 292  
301 +==== 2.3.2.1  MOD~=1 (Default Mode) ====
293 293  
294 -=== 2.3.1  MOD~=1 (Default Mode) ===
295 295  
296 296  In this mode, uplink payload includes in total 11 bytes. Uplink packets use FPORT=2.
297 297  
298 -|**Size(bytes)**|**2**|**2**|**2**|**1**|**2**|**2**
299 -|**Value**|Bat|Temperature(DS18B20)|ADC|Digital in & Digital Interrupt|Temperature（SHT20 or SHT31 or BH1750 Illumination Sensor|Humidity（SHT20)
306 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
307 +|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:20px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:90px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:130px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:80px" %)**2**
308 +|**Value**|Bat|(% style="width:191px" %)(((
309 +Temperature(DS18B20)(PC13)
310 +)))|(% style="width:78px" %)(((
311 +ADC(PA4)
312 +)))|(% style="width:216px" %)(((
313 +Digital in(PB15)&Digital Interrupt(PA8)
314 +)))|(% style="width:308px" %)(((
315 +Temperature(SHT20 or SHT31 or BH1750 Illumination Sensor)
316 +)))|(% style="width:154px" %)(((
317 +Humidity(SHT20 or SHT31)
318 +)))
300 300  
301 301  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220627150949-6.png?rev=1.1||alt="image-20220627150949-6.png"]]
302 302  
303 -=== 2.3.2 MOD~=2 (Distance Mode) ===
304 304  
323 +
324 +==== 2.3.2.2  MOD~=2 (Distance Mode) ====
325 +
326 +
305 305  This mode is target to measure the distance. The payload of this mode is totally 11 bytes. The 8^^th^^ and 9^^th^^ bytes is for the distance.
306 306  
307 -|**Size(bytes)**|**2**|**2**|**2**|**1**|**2**|**2**
308 -|**Value**|BAT|(((
309 -Temperature(DS18B20)
310 -)))|ADC|Digital in & Digital Interrupt|(((
311 -Distance measure by:
312 -1) LIDAR-Lite V3HP
313 -Or
329 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
330 +|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:30px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:110px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:110px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:140px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)**2**
331 +|**Value**|BAT|(% style="width:196px" %)(((
332 +Temperature(DS18B20)(PC13)
333 +)))|(% style="width:87px" %)(((
334 +ADC(PA4)
335 +)))|(% style="width:189px" %)(((
336 +Digital in(PB15) & Digital Interrupt(PA8)
337 +)))|(% style="width:208px" %)(((
338 +Distance measure by:1) LIDAR-Lite V3HP
339 +Or
314 314  2) Ultrasonic Sensor
315 -)))|Reserved
341 +)))|(% style="width:117px" %)Reserved
316 316  
317 317  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656324539647-568.png?rev=1.1||alt="1656324539647-568.png"]]
318 318  
319 -**Connection of LIDAR-Lite V3HP:**
320 320  
321 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656324581381-162.png?rev=1.1||alt="1656324581381-162.png"]]
346 +(% style="color:blue" %)**Connection of LIDAR-Lite V3HP:**
322 322  
323 -**Connection to Ultrasonic Sensor:**
348 +[[image:image-20230512173758-5.png||height="563" width="712"]]
324 324  
325 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656324598488-204.png?rev=1.1||alt="1656324598488-204.png"]]
326 326  
351 +(% style="color:blue" %)**Connection to Ultrasonic Sensor:**
352 +
353 +Need to remove R1 and R2 resistors to get low power,otherwise there will be 240uA standby current.
354 +
355 +[[image:image-20230512173903-6.png||height="596" width="715"]]
356 +
357 +
327 327  For the connection to TF-Mini or TF-Luna , MOD2 payload is as below:
328 328  
329 -|**Size(bytes)**|**2**|**2**|**1**|**2**|**2**|**2**
330 -|**Value**|BAT|(((
331 -Temperature(DS18B20)
332 -)))|Digital in & Digital Interrupt|ADC|(((
360 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
361 +|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:20px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:120px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:80px" %)**2**
362 +|**Value**|BAT|(% style="width:183px" %)(((
363 +Temperature(DS18B20)(PC13)
364 +)))|(% style="width:173px" %)(((
365 +Digital in(PB15) & Digital Interrupt(PA8)
366 +)))|(% style="width:84px" %)(((
367 +ADC(PA4)
368 +)))|(% style="width:323px" %)(((
333 333  Distance measure by:1)TF-Mini plus LiDAR
334 334  Or 
335 335  2) TF-Luna LiDAR
336 -)))|Distance signal  strength
372 +)))|(% style="width:188px" %)Distance signal  strength
337 337  
338 338  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656376779088-686.png?rev=1.1||alt="1656376779088-686.png"]]
339 339  
376 +
340 340  **Connection to [[TF-Mini plus>>url:http://en.benewake.com/product/detail/5c345cd0e5b3a844c472329b.html]] LiDAR(UART version):**
341 341  
342 -Need to remove R3 and R4 resistors to get low power. Since firmware v1.7.0
379 +Need to remove R3 and R4 resistors to get low power,otherwise there will be 400uA standby current.
343 343  
344 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656376795715-436.png?rev=1.1||alt="1656376795715-436.png"]]
381 +[[image:image-20230512180609-7.png||height="555" width="802"]]
345 345  
383 +
346 346  **Connection to [[TF-Luna>>url:http://en.benewake.com/product/detail/5e1c1fd04d839408076b6255.html]] LiDAR (UART version):**
347 347  
348 -Need to remove R3 and R4 resistors to get low power. Since firmware v1.7.0
386 +Need to remove R3 and R4 resistors to get low power,otherwise there will be 400uA standby current.
349 349  
350 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656376865561-355.png?rev=1.1||alt="1656376865561-355.png"]]
388 +[[image:image-20230513105207-4.png||height="469" width="802"]]
351 351  
352 -Please use firmware version > 1.6.5 when use MOD=2, in this firmware version, user can use LSn50 v1 to power the ultrasonic sensor directly and with low power consumption.
353 353  
354 -=== 2.3.3 MOD~=3 (3 ADC + I2C) ===
391 +==== 2.3.2.3  MOD~=3 (3 ADC + I2C) ====
355 355  
393 +
356 356  This mode has total 12 bytes. Include 3 x ADC + 1x I2C
357 357  
358 -|=(((
396 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
397 +|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
359 359  **Size(bytes)**
360 -)))|=**2**|=**2**|=**2**|=**1**|=2|=2|=1
361 -|**Value**|ADC(Pin PA0)|ADC2(PA1)|ADC3 (PA4)|(((
362 -Digital in(PA12)&Digital Interrupt1(PB14)
363 -)))|Temperature（SHT20 or SHT31 or BH1750 Illumination Sensor）|Humidity（SHT20 or SHT31)|Bat
399 +)))|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 110px;background-color:#D9E2F3;color:#0070C0" %)2|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)2|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)1
400 +|**Value**|(% style="width:68px" %)(((
401 +ADC1(PA4)
402 +)))|(% style="width:75px" %)(((
403 +ADC2(PA5)
404 +)))|(((
405 +ADC3(PA8)
406 +)))|(((
407 +Digital Interrupt(PB15)
408 +)))|(% style="width:304px" %)(((
409 +Temperature(SHT20 or SHT31 or BH1750 Illumination Sensor)
410 +)))|(% style="width:163px" %)(((
411 +Humidity(SHT20 or SHT31)
412 +)))|(% style="width:53px" %)Bat
364 364  
365 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656377431497-975.png?rev=1.1||alt="1656377431497-975.png"]]
414 +[[image:image-20230513110214-6.png]]
366 366  
367 -=== 2.3.4 MOD~=4 (3 x DS18B20) ===
368 368  
369 -This mode is supported in firmware version since v1.6.1. Software set to AT+MOD=4
417 +==== 2.3.2.4 MOD~=4 (3 x DS18B20) ====
370 370  
371 -Hardware connection is as below,
372 372  
373 -**( Note:**
374 -
375 -* In hardware version v1.x and v2.0 , R3 & R4 should change from 10k to 4.7k ohm to support the other 2 x DS18B20 probes.
376 -* In hardware version v2.1 no need to change R3 , R4, by default, they are 4.7k ohm already.
377 -
378 -See [[here>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H1.6A0HardwareChangelog]] for hardware changelog. **) **
379 -
380 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656377461619-156.png?rev=1.1||alt="1656377461619-156.png"]]
381 -
382 382  This mode has total 11 bytes. As shown below:
383 383  
384 -|**Size(bytes)**|**2**|**2**|**2**|**1**|**2**|**2**
385 -|**Value**|BAT|(((
386 -Temperature1
387 -(DS18B20)
388 -(PB3)
389 -)))|ADC|Digital in & Digital Interrupt|Temperature2
390 -(DS18B20)
391 -(PA9)|Temperature3
392 -(DS18B20)
393 -(PA10)
422 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
423 +|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**Size(bytes)**|(% style="background-color:#d9e2f3; color:#0070c0; width:20px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**1**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)**2**
424 +|**Value**|BAT|(% style="width:186px" %)(((
425 +Temperature1(DS18B20)(PC13)
426 +)))|(% style="width:82px" %)(((
427 +ADC(PA4)
428 +)))|(% style="width:210px" %)(((
429 +Digital in(PB15) & Digital Interrupt(PA8) 
430 +)))|(% style="width:191px" %)Temperature2(DS18B20)
431 +(PB9)|(% style="width:183px" %)Temperature3(DS18B20)(PB8)
394 394  
395 395  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656377606181-607.png?rev=1.1||alt="1656377606181-607.png"]]
396 396  
397 -=== 2.3.5 MOD~=5(Weight Measurement by HX711) ===
435 +[[image:image-20230513134006-1.png||height="559" width="736"]]
398 398  
399 -This mode is supported in firmware version since v1.6.2. Please use v1.6.5 firmware version so user no need to use extra LDO for connection.
400 400  
401 401  
402 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656378224664-860.png?rev=1.1||alt="1656378224664-860.png"]]
439 +==== 2.3.2.5  MOD~=5(Weight Measurement by HX711) ====
403 403  
441 +
442 +[[image:image-20230512164658-2.png||height="532" width="729"]]
443 +
404 404  Each HX711 need to be calibrated before used. User need to do below two steps:
405 405  
406 406  1. Zero calibration. Don't put anything on load cell and run **AT+WEIGRE** to calibrate to Zero gram.
407 407  1. Adjust calibration factor (default value 400): Put a known weight thing on load cell and run **AT+WEIGAP** to adjust the Calibration Factor.
408 408  1. (((
409 -Remove the limit of plus or minus 5Kg in mode 5, and expand from 2 bytes to 4 bytes, the unit is g.(Since v1.8.0)
449 +Weight has 4 bytes, the unit is g.
450 +
451 +
452 +
410 410  )))
411 411  
412 412  For example:
413 413  
414 -**AT+WEIGAP =403.0**
457 +**AT+GETSENSORVALUE =0**
415 415  
416 416  Response:  Weight is 401 g
417 417  
418 418  Check the response of this command and adjust the value to match the real value for thing.
419 419  
420 -|=(((
463 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
464 +|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
421 421  **Size(bytes)**
422 -)))|=**2**|=**2**|=**2**|=**1**|=**4**|=2
423 -|**Value**|[[Bat>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.1BatteryInfo]]|[[Temperature(DS18B20)>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.2Temperature28DS18B2029]]|[[ADC>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.4AnalogueDigitalConverter28ADC29]]|[[Digital Input and Digitak Interrupt>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.3DigitalInput]]|Weight|Reserved
466 +)))|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 150px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 200px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**4**
467 +|**Value**|BAT|(% style="width:193px" %)(((
468 +Temperature(DS18B20)(PC13)
469 +)))|(% style="width:85px" %)(((
470 +ADC(PA4)
471 +)))|(% style="width:186px" %)(((
472 +Digital in(PB15) & Digital Interrupt(PA8)
473 +)))|(% style="width:100px" %)Weight
424 424  
425 425  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220820120036-2.png?width=1003&height=469&rev=1.1||alt="image-20220820120036-2.png" height="469" width="1003"]]
426 426  
427 -=== 2.3.6 MOD~=6 (Counting Mode, Since firmware v1.6.5) ===
428 428  
478 +
479 +==== 2.3.2.6  MOD~=6 (Counting Mode) ====
480 +
481 +
429 429  In this mode, the device will work in counting mode. It counts the interrupt on the interrupt pins and sends the count on TDC time.
430 430  
431 431  Connection is as below. The PIR sensor is a count sensor, it will generate interrupt when people come close or go away. User can replace the PIR sensor with other counting sensors.
432 432  
433 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656378351863-572.png?rev=1.1||alt="1656378351863-572.png"]]
486 +[[image:image-20230512181814-9.png||height="543" width="697"]]
434 434  
435 -**Note:** LoRaWAN wireless transmission will infect the PIR sensor. Which cause the counting value increase +1 for every uplink. User can change PIR sensor or put sensor away of the LSN50 to avoid this happen.
436 436  
437 -|=**Size(bytes)**|=**2**|=**2**|=**2**|=**1**|=**4**
438 -|**Value**|[[BAT>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.1BatteryInfo]]|(((
439 -[[Temperature(DS18B20)>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.2Temperature28DS18B2029]]
440 -)))|[[ADC>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.4AnalogueDigitalConverter28ADC29]]|[[Digital in>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/#H2.4.3DigitalInput]]|Count
489 +(% style="color:red" %)**Note:** **LoRaWAN wireless transmission will infect the PIR sensor. Which cause the counting value increase +1 for every uplink. User can change PIR sensor or put sensor away of the SN50_v3 to avoid this happen.**
441 441  
491 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
492 +|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)**Size(bytes)**|=(% style="width: 40px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 180px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 80px;background-color:#D9E2F3;color:#0070C0" %)**4**
493 +|**Value**|BAT|(% style="width:256px" %)(((
494 +Temperature(DS18B20)(PC13)
495 +)))|(% style="width:108px" %)(((
496 +ADC(PA4)
497 +)))|(% style="width:126px" %)(((
498 +Digital in(PB15)
499 +)))|(% style="width:145px" %)(((
500 +Count(PA8)
501 +)))
502 +
442 442  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656378441509-171.png?rev=1.1||alt="1656378441509-171.png"]]
443 443  
444 -=== 2.3.7  MOD~=7 Three interrupt contact modes (the hardware version needs to support three interrupt versions, Since firmware v1.8.0) ===
445 445  
446 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220820140109-3.png?rev=1.1||alt="image-20220820140109-3.png"]]
447 447  
448 -|=(((
507 +==== 2.3.2.7  MOD~=7 (Three interrupt contact modes) ====
508 +
509 +
510 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
511 +|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
449 449  **Size(bytes)**
450 -)))|=**2**|=**2**|=**2**|=**1**|=**1**|=1|=2
451 -|**Value**|BAT|Temperature(DS18B20)|ADC|(((
452 -Digital in(PA12)&Digital Interrupt1(PB14)
453 -)))|Digital Interrupt2(PB15)|Digital Interrupt3(PA4)|Reserved
513 +)))|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)1|=(% style="width: 40px;background-color:#D9E2F3;color:#0070C0" %)2
514 +|**Value**|BAT|(% style="width:188px" %)(((
515 +Temperature(DS18B20)
516 +(PC13)
517 +)))|(% style="width:83px" %)(((
518 +ADC(PA5)
519 +)))|(% style="width:184px" %)(((
520 +Digital Interrupt1(PA8)
521 +)))|(% style="width:186px" %)Digital Interrupt2(PA4)|(% style="width:197px" %)Digital Interrupt3(PB15)|(% style="width:100px" %)Reserved
454 454  
455 -=== 2.3.8  MOD~=8 （3ADC+1DS18B20, Since firmware v1.8.0） ===
523 +[[image:image-20230513111203-7.png||height="324" width="975"]]
456 456  
457 -|=(((
525 +
526 +==== 2.3.2.8  MOD~=8 （3ADC+1DS18B20） ====
527 +
528 +
529 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
530 +|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
458 458  **Size(bytes)**
459 -)))|=**2**|=**2**|=**2**|=**1**|=**2**|=2
460 -|**Value**|BAT|Temperature(DS18B20)|(((
461 -ADC1(PA0)
462 -)))|(((
463 -Digital in
464 -& Digital Interrupt(PB14)
465 -)))|(((
466 -ADC2(PA1)
467 -)))|(((
468 -ADC3(PA4)
532 +)))|=(% style="width: 30px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 110px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 70px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 120px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 70px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 70px;background-color:#D9E2F3;color:#0070C0" %)2
533 +|**Value**|BAT|(% style="width:207px" %)(((
534 +Temperature(DS18B20)
535 +(PC13)
536 +)))|(% style="width:94px" %)(((
537 +ADC1(PA4)
538 +)))|(% style="width:198px" %)(((
539 +Digital Interrupt(PB15)
540 +)))|(% style="width:84px" %)(((
541 +ADC2(PA5)
542 +)))|(% style="width:82px" %)(((
543 +ADC3(PA8)
469 469  )))
470 470  
471 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220823164903-2.png?rev=1.1||alt="image-20220823164903-2.png"]]
546 +[[image:image-20230513111231-8.png||height="335" width="900"]]
472 472  
473 -=== 2.3.9  MOD~=9 3DS18B20+ two Interrupt count mode (the hardware version needs to support 3 interrupt versions, Since firmware v1.8.0) ===
474 474  
475 -|=(((
549 +==== 2.3.2.9  MOD~=9 (3DS18B20+ two Interrupt count mode) ====
550 +
551 +
552 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
553 +|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
476 476  **Size(bytes)**
477 -)))|=**2**|=**2**|=**2**|=**1**|=**2**|=4|=4
555 +)))|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)4|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)4
478 478  |**Value**|BAT|(((
479 -Temperature1(PB3)
557 +Temperature
558 +(DS18B20)(PC13)
480 480  )))|(((
481 -Temperature2(PA9)
560 +Temperature2
561 +(DS18B20)(PB9)
482 482  )))|(((
483 -Digital in
484 -& Digital Interrupt(PA4)
485 -)))|(((
486 -Temperature3(PA10)
487 -)))|(((
488 -Count1(PB14)
489 -)))|(((
490 -Count2(PB15)
563 +Digital Interrupt
564 +(PB15)
565 +)))|(% style="width:193px" %)(((
566 +Temperature3
567 +(DS18B20)(PB8)
568 +)))|(% style="width:78px" %)(((
569 +Count1(PA8)
570 +)))|(% style="width:78px" %)(((
571 +Count2(PA4)
491 491  )))
492 492  
493 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220823165322-3.png?rev=1.1||alt="image-20220823165322-3.png"]]
574 +[[image:image-20230513111255-9.png||height="341" width="899"]]
494 494  
495 -**The newly added AT command is issued correspondingly:**
576 +(% style="color:blue" %)**The newly added AT command is issued correspondingly:**
496 496  
497 -**~ AT+INTMOD1** ** PB14**  pin：  Corresponding downlink:  **06 00 00 xx**
578 +(% style="color:#037691" %)** AT+INTMOD1 PA8**(%%)  pin：  Corresponding downlink:  (% style="color:#037691" %)**06 00 00 xx**
498 498  
499 -**~ AT+INTMOD2**  **PB15** pin：  Corresponding downlink:**  06 00 01 xx**
580 +(% style="color:#037691" %)** AT+INTMOD2 PA4**(%%)  pin：  Corresponding downlink: (% style="color:#037691" %)**06 00 01 xx**
500 500  
501 -**~ AT+INTMOD3**  **PA4**  pin：  Corresponding downlink:  ** 06 00 02 xx**
582 +(% style="color:#037691" %)** AT+INTMOD3 PB15**(%%)  pin：  Corresponding downlink:  (% style="color:#037691" %)** 06 00 02 xx**
502 502  
503 -**AT+SETCNT=aa,bb** 
504 504  
505 -When AA is 1, set the count of PB14 pin to BB Corresponding downlink：09 01 bb bb bb bb
585 +(% style="color:blue" %)**AT+SETCNT=aa,bb** 
506 506  
507 -When AA is 2, set the count of PB15 pin to BB Corresponding downlink：09 02 bb bb bb bb
587 +When AA is 1, set the count of PA8 pin to BB Corresponding downlink：09 01 bb bb bb bb
508 508  
509 -=== 2.3.10  ​Decode payload in The Things Network ===
589 +When AA is 2, set the count of PA4 pin to BB Corresponding downlink：09 02 bb bb bb bb
510 510  
591 +
592 +=== 2.3.3  ​Decode payload ===
593 +
594 +
511 511  While using TTN V3 network, you can add the payload format to decode the payload.
512 512  
513 513  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656378466788-734.png?rev=1.1||alt="1656378466788-734.png"]]
... ... @@ -514,41 +514,33 @@
514 514  
515 515  The payload decoder function for TTN V3 are here:
516 516  
517 -LSN50 TTN V3 Payload Decoder:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>url:https://github.com/dragino/dragino-end-node-decoder]]
601 +SN50v3 TTN V3 Payload Decoder:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>url:https://github.com/dragino/dragino-end-node-decoder]]
518 518  
519 519  
520 -Sensor Data is uplink via FPORT=2
604 +==== 2.3.3.1 Battery Info ====
521 521  
522 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
523 -|=(% style="width: 90px;background-color:#D9E2F3" %)(((
524 -**Size(bytes)**
525 -)))|=(% style="width: 80px;background-color:#D9E2F3" %)2|=(% style="width: 90px;background-color:#D9E2F3" %)4|=(% style="width:80px;background-color:#D9E2F3" %)1|=(% style="width: 80px;background-color:#D9E2F3" %)**2**|=(% style="width: 80px;background-color:#D9E2F3" %)2
526 -|(% style="width:99px" %)**Value**|(% style="width:69px" %)(((
527 -[[Battery>>||anchor="HBattery:"]]
528 -)))|(% style="width:130px" %)(((
529 -[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
530 -)))|(% style="width:91px" %)(((
531 -[[Alarm Flag>>||anchor="HAlarmFlag26MOD:"]]
532 -)))|(% style="width:103px" %)(((
533 -[[Temperature>>||anchor="HTemperature:"]]
534 -)))|(% style="width:80px" %)(((
535 -[[Humidity>>||anchor="HHumidity:"]]
536 -)))
537 537  
538 -==== (% style="color:#4472c4" %)**Battery**(%%) ====
607 +Check the battery voltage for SN50v3.
539 539  
540 -Sensor Battery Level.
541 -
542 542  Ex1: 0x0B45 = 2885mV
543 543  
544 544  Ex2: 0x0B49 = 2889mV
545 545  
546 546  
614 +==== 2.3.3.2  Temperature (DS18B20) ====
547 547  
548 -==== (% style="color:#4472c4" %)**Temperature**(%%) ====
549 549  
550 -**Example**:
617 +If there is a DS18B20 connected to PC13 pin. The temperature will be uploaded in the payload.
551 551  
619 +More DS18B20 can check the [[3 DS18B20 mode>>||anchor="H2.3.2.4MOD3D4283xDS18B2029"]]
620 +
621 +(% style="color:blue" %)**Connection:**
622 +
623 +[[image:image-20230512180718-8.png||height="538" width="647"]]
624 +
625 +
626 +(% style="color:blue" %)**Example**:
627 +
552 552  If payload is: 0105H:  (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
553 553  
554 554  If payload is: FF3FH :  (FF3F & 8000 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
... ... @@ -556,200 +556,232 @@
556 556  （FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
557 557  
558 558  
559 -==== (% style="color:#4472c4" %)**Humidity**(%%) ====
635 +==== 2.3.3.3 Digital Input ====
560 560  
561 561  
562 -Read:0x(0197)=412    Value:  412 / 10=41.2, So 41.2%
638 +The digital input for pin PB15,
563 563  
640 +* When PB15 is high, the bit 1 of payload byte 6 is 1.
641 +* When PB15 is low, the bit 1 of payload byte 6 is 0.
564 564  
565 -==== (% style="color:#4472c4" %)**Alarm Flag& MOD**(%%) ====
643 +(% class="wikigeneratedid" id="H2.3.3.4A0AnalogueDigitalConverter28ADC29" %)
644 +(((
645 +When the digital interrupt pin is set to AT+INTMODx=0, this pin is used as a digital input pin.
566 566  
647 +(% style="color:red" %)**Note: The maximum voltage input supports 3.6V.**
567 567  
568 -**Example:**
649 +
650 +)))
569 569  
570 -If payload & 0x01 = 0x01  **~-~->** This is an Alarm Message
652 +==== 2.3.3.4  Analogue Digital Converter (ADC) ====
571 571  
572 -If payload & 0x01 = 0x00  **~-~->** This is a normal uplink message, no alarm
573 573  
574 -If payload >> 2 = 0x00  **~-~->**  means MOD=1, This is a sampling uplink message
655 +The measuring range of the ADC is only about 0V to 1.1V The voltage resolution is about 0.24mv.
575 575  
576 -If payload >> 2 = 0x31  **~-~->**  means MOD=31, this message is a reply message for polling, this message contains the alarm settings. see [[this link>>path:#HPolltheAlarmsettings:]] for detail. 
657 +When the measured output voltage of the sensor is not within the range of 0V and 1.1V, the output voltage terminal of the sensor shall be divided The example in the following figure is to reduce the output voltage of the sensor by three times If it is necessary to reduce more times, calculate according to the formula in the figure and connect the corresponding resistance in series.
577 577  
659 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220628150112-1.png?width=285&height=241&rev=1.1||alt="image-20220628150112-1.png" height="241" width="285"]]
578 578  
579 -== 2.4 Payload Decoder file ==
661 +(% style="color:red" %)**Note: If the ADC type sensor needs to be powered by SN50_v3, it is recommended to use +5V to control its switch.Only sensors with low power consumption can be powered with VDD.**
580 580  
581 581  
582 -In TTN, use can add a custom payload so it shows friendly reading
664 +==== 2.3.3.5 Digital Interrupt ====
583 583  
584 -In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from:
585 585  
586 -[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/LSN50v2-S31%26S31B >>https://github.com/dragino/dragino-end-node-decoder/tree/main/LSN50v2-S31%26S31B]]
667 +Digital Interrupt refers to pin PA8, and there are different trigger methods. When there is a trigger, the SN50v3 will send a packet to the server.
587 587  
669 +(% style="color:blue" %)** Interrupt connection method:**
588 588  
589 -== 2.5 Datalog Feature ==
671 +[[image:image-20230513105351-5.png||height="147" width="485"]]
590 590  
591 591  
592 -Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, S31x-LB will store the reading for future retrieving purposes.
674 +(% style="color:blue" %)**Example to use with door sensor :**
593 593  
676 +The door sensor is shown at right. It is a two wire magnetic contact switch used for detecting the open/close status of doors or windows.
594 594  
595 -=== 2.5.1 Ways to get datalog via LoRaWAN ===
678 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379210849-860.png?rev=1.1||alt="1656379210849-860.png"]]
596 596  
680 +When the two pieces are close to each other, the 2 wire output will be short or open (depending on the type), while if the two pieces are away from each other, the 2 wire output will be the opposite status. So we can use SN50_v3 interrupt interface to detect the status for the door or window.
597 597  
598 -Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayloadA028FPORT3D329"]], S31x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
599 599  
600 -* a) S31x-LB will do an ACK check for data records sending to make sure every data arrive server.
601 -* b) S31x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB gets a ACK, S31x-LB will consider there is a network connection and resend all NONE-ACK messages.
683 +(% style="color:blue" %)**Below is the installation example:**
602 602  
603 -Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
685 +Fix one piece of the magnetic sensor to the door and connect the two pins to SN50_v3 as follows:
604 604  
605 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
687 +* (((
688 +One pin to SN50_v3's PA8 pin
689 +)))
690 +* (((
691 +The other pin to SN50_v3's VDD pin
692 +)))
606 606  
607 -=== 2.5.2 Unix TimeStamp ===
694 +Install the other piece to the door. Find a place where the two pieces will be close to each other when the door is closed. For this particular magnetic sensor, when the door is closed, the output will be short, and PA8 will be at the VCC voltage.
608 608  
696 +Door sensors have two types: (% style="color:blue" %)** NC (Normal close)**(%%) and (% style="color:blue" %)**NO (normal open)**(%%). The connection for both type sensors are the same. But the decoding for payload are reverse, user need to modify this in the IoT Server decoder.
609 609  
610 -S31x-LB uses Unix TimeStamp format based on
698 +When door sensor is shorted, there will extra power consumption in the circuit, the extra current is 3v3/R14 = 3v3/1Mohm = 3uA which can be ignored.
611 611  
612 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
700 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379283019-229.png?rev=1.1||alt="1656379283019-229.png"]]
613 613  
614 -User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
702 +The above photos shows the two parts of the magnetic switch fitted to a door.
615 615  
616 -Below is the converter example
704 +The software by default uses the falling edge on the signal line as an interrupt. We need to modify it to accept both the rising edge (0v ~-~-> VCC , door close) and the falling edge (VCC ~-~-> 0v , door open) as the interrupt.
617 617  
618 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="图片-20220523001219-12.png" height="298" width="720"]]
706 +The command is:
619 619  
620 -So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
708 +(% style="color:blue" %)**AT+INTMOD1=1   ** (%%) ~/~/(more info about INMOD please refer** **[[**AT Command Manual**>>url:http://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/&file=DRAGINO_LSN50_AT_Commands_v1.5.1.pdf]]**. **)
621 621  
710 +Below shows some screen captures in TTN V3:
622 622  
623 -=== 2.5.3 Set Device Time ===
712 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379339508-835.png?rev=1.1||alt="1656379339508-835.png"]]
624 624  
625 625  
626 -User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
715 +In MOD=1, user can use byte 6 to see the status for door open or close. TTN V3 decoder is as below:
627 627  
628 -Once S31x-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to S31x-LB. If S31x-LB fails to get the time from the server, S31x-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
717 +door= (bytes[6] & 0x80)? "CLOSE":"OPEN";
629 629  
630 -(% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
631 631  
720 +==== 2.3.3.6 I2C Interface (SHT20 & SHT31) ====
632 632  
633 -=== 2.5.4 Datalog Uplink payload (FPORT~=3) ===
634 634  
723 +The SDA and SCK are I2C interface lines. You can use these to connect to an I2C device and get the sensor data.
635 635  
636 -The Datalog uplinks will use below payload format.
725 +We have made an example to show how to use the I2C interface to connect to the SHT20/ SHT31 Temperature and Humidity Sensor.
637 637  
638 -**Retrieval data payload:**
727 +Notice: Different I2C sensors have different I2C commands set and initiate process, if user want to use other I2C sensors, User need to re-write the source code to support those sensors. SHT20/ SHT31 code in SN50_v3 will be a good reference.
639 639  
640 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
641 -|=(% style="width: 80px;background-color:#D9E2F3" %)(((
642 -**Size(bytes)**
643 -)))|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 120px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 103px; background-color: rgb(217, 226, 243);" %)**1**|=(% style="width: 85px; background-color: rgb(217, 226, 243);" %)**4**
644 -|(% style="width:103px" %)**Value**|(% style="width:54px" %)(((
645 -[[Temp_Black>>||anchor="HTemperatureBlack:"]]
646 -)))|(% style="width:51px" %)[[Temp_White>>||anchor="HTemperatureWhite:"]]|(% style="width:89px" %)[[Temp_ Red or Temp _White>>||anchor="HTemperatureREDorTemperatureWhite:"]]|(% style="width:103px" %)Poll message flag & Ext|(% style="width:54px" %)[[Unix Time Stamp>>||anchor="H2.5.2UnixTimeStamp"]]
729 +Below is the connection to SHT20/ SHT31. The connection is as below:
647 647  
648 -**Poll message flag & Ext:**
649 649  
650 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20221006192726-1.png?width=754&height=112&rev=1.1||alt="图片-20221006192726-1.png" height="112" width="754"]]
732 +[[image:image-20230513103633-3.png||height="448" width="716"]]
651 651  
652 -**No ACK Message**:  1: This message means this payload is fromn Uplink Message which doesn't get ACK from the server before ( for **PNACKMD=1** feature)
734 +The device will be able to get the I2C sensor data now and upload to IoT Server.
653 653  
654 -**Poll Message Flag**: 1: This message is a poll message reply.
736 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379664142-345.png?rev=1.1||alt="1656379664142-345.png"]]
655 655  
656 -* Poll Message Flag is set to 1.
738 +Convert the read byte to decimal and divide it by ten.
657 657  
658 -* Each data entry is 11 bytes, to save airtime and battery, devices will send max bytes according to the current DR and Frequency bands.
740 +**Example:**
659 659  
660 -For example, in US915 band, the max payload for different DR is:
742 +Temperature:  Read:0116(H) = 278(D)  Value:  278 /10=27.8℃;
661 661  
662 -**a) DR0:** max is 11 bytes so one entry of data
744 +Humidity:    Read:0248(H)=584(D)  Value:  584 / 10=58.4, So 58.4%
663 663  
664 -**b) DR1:** max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
746 +If you want to use other I2C device, please refer the SHT20 part source code as reference.
665 665  
666 -**c) DR2:** total payload includes 11 entries of data
667 667  
668 -**d) DR3: **total payload includes 22 entries of data.
749 +==== 2.3.3.7  ​Distance Reading ====
669 669  
670 -If devise doesn't have any data in the polling time. Device will uplink 11 bytes of 0   
671 671  
752 +Refer [[Ultrasonic Sensor section>>||anchor="H2.3.3.8UltrasonicSensor"]].
672 672  
754 +
755 +==== 2.3.3.8 Ultrasonic Sensor ====
756 +
757 +
758 +This Fundamental Principles of this sensor can be found at this link: [[https:~~/~~/wiki.dfrobot.com/Weather_-_proof_Ultrasonic_Sensor_with_Separate_Probe_SKU~~_~~__SEN0208>>url:https://wiki.dfrobot.com/Weather_-_proof_Ultrasonic_Sensor_with_Separate_Probe_SKU___SEN0208]]
759 +
760 +The SN50_v3 detects the pulse width of the sensor and converts it to mm output. The accuracy will be within 1 centimeter. The usable range (the distance between the ultrasonic probe and the measured object) is between 24cm and 600cm.
761 +
762 +The working principle of this sensor is similar to the (% style="color:blue" %)**HC-SR04**(%%) ultrasonic sensor.
763 +
764 +The picture below shows the connection:
765 +
766 +[[image:image-20230512173903-6.png||height="596" width="715"]]
767 +
768 +
769 +Connect to the SN50_v3 and run (% style="color:blue" %)**AT+MOD=2**(%%) to switch to ultrasonic mode (ULT).
770 +
771 +The ultrasonic sensor uses the 8^^th^^ and 9^^th^^ byte for the measurement value.
772 +
673 673  **Example:**
674 674  
675 -If S31x-LB has below data inside Flash:
775 +Distance:  Read: 0C2D(Hex) = 3117(D)  Value:  3117 mm=311.7 cm
676 676  
677 -[[image:1682646494051-944.png]]
678 678  
679 -If user sends below downlink command: 3160065F9760066DA705
778 +==== 2.3.3.9  Battery Output - BAT pin ====
680 680  
681 -Where : Start time: 60065F97 = time 21/1/19 04:27:03
682 682  
683 - Stop time: 60066DA7= time 21/1/19 05:27:03
781 +The BAT pin of SN50v3 is connected to the Battery directly. If users want to use BAT pin to power an external sensor. User need to make sure the external sensor is of low power consumption. Because the BAT pin is always open. If the external sensor is of high power consumption. the battery of SN50v3-LB will run out very soon.
684 684  
685 685  
686 -**S31x-LB will uplink this payload.**
784 +==== 2.3.3.10  +5V Output ====
687 687  
688 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-13.png?width=727&height=421&rev=1.1||alt="图片-20220523001219-13.png" height="421" width="727"]]
689 689  
690 -(((
691 -__**7FFF089801464160065F97**__ **__7FFF__ __088E__ __014B__ __41__ __60066009__** 7FFF0885014E41600660667FFF0875015141600662BE7FFF086B015541600665167FFF08660155416006676E7FFF085F015A41600669C67FFF0857015D4160066C1E
692 -)))
787 +SN50v3 will enable +5V output before all sampling and disable the +5v after all sampling. 
693 693  
694 -(((
695 -Where the first 11 bytes is for the first entry:
696 -)))
789 +The 5V output time can be controlled by AT Command.
697 697  
698 -(((
699 -7FFF089801464160065F97
700 -)))
791 +(% style="color:blue" %)**AT+5VT=1000**
701 701  
702 -(((
703 -**Ext sensor data**=0x7FFF/100=327.67
704 -)))
793 +Means set 5V valid time to have 1000ms. So the real 5V output will actually have 1000ms + sampling time for other sensors.
705 705  
706 -(((
707 -**Temp**=0x088E/100=22.00
708 -)))
795 +By default the AT+5VT=500. If the external sensor which require 5v and require more time to get stable state, user can use this command to increase the power ON duration for this sensor.
709 709  
710 -(((
711 -**Hum**=0x014B/10=32.6
712 -)))
713 713  
714 -(((
715 -**poll message flag & Ext**=0x41,means reply data,Ext=1
716 -)))
798 +==== 2.3.3.11  BH1750 Illumination Sensor ====
717 717  
718 -(((
719 -**Unix time** is 0x60066009=1611030423s=21/1/19 04:27:03
720 -)))
721 721  
801 +MOD=1 support this sensor. The sensor value is in the 8^^th^^ and 9^^th^^ bytes.
722 722  
723 -(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的
803 +[[image:image-20230512172447-4.png||height="416" width="712"]]
724 724  
725 -== 2.6 Temperature Alarm Feature ==
726 726  
806 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220628110012-12.png?rev=1.1||alt="image-20220628110012-12.png" height="361" width="953"]]
727 727  
728 -S31x-LB work flow with Alarm feature.
729 729  
809 +==== 2.3.3.12  Working MOD ====
730 730  
731 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/image-20220623090437-1.png?rev=1.1||alt="图片-20220623090437-1.png"]]
732 732  
812 +The working MOD info is contained in the Digital in & Digital Interrupt byte (7^^th^^ Byte).
733 733  
734 -== 2.7 Frequency Plans ==
814 +User can use the 3^^rd^^ ~~ 7^^th^^  bit of this byte to see the working mod:
735 735  
816 +Case 7^^th^^ Byte >> 2 & 0x1f:
736 736  
737 -The S31x-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
818 +* 0: MOD1
819 +* 1: MOD2
820 +* 2: MOD3
821 +* 3: MOD4
822 +* 4: MOD5
823 +* 5: MOD6
824 +* 6: MOD7
825 +* 7: MOD8
826 +* 8: MOD9
738 738  
828 +
829 +
830 +== 2.4 Payload Decoder file ==
831 +
832 +
833 +In TTN, use can add a custom payload so it shows friendly reading
834 +
835 +In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from:
836 +
837 +[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/SN50_v3-LB>>https://github.com/dragino/dragino-end-node-decoder/tree/main/SN50_v3-LB]]
838 +
839 +
840 +== 2.5 Frequency Plans ==
841 +
842 +
843 +The SN50v3-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
844 +
739 739  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
740 740  
741 741  
742 -= 3. Configure S31x-LB =
848 += 3. Configure SN50v3-LB =
743 743  
744 744  == 3.1 Configure Methods ==
745 745  
746 746  
747 -S31x-LB supports below configure method:
853 +SN50v3-LB supports below configure method:
748 748  
749 749  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
750 750  * AT Command via UART Connection : See [[UART Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
751 751  * LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
752 752  
859 +
860 +
753 753  == 3.2 General Commands ==
754 754  
755 755  
... ... @@ -763,7 +763,7 @@
763 763  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
764 764  
765 765  
766 -== 3.3 Commands special design for S31x-LB ==
874 +== 3.3 Commands special design for SN50v3-LB ==
767 767  
768 768  
769 769  These commands only valid for S31x-LB, as below:
... ... @@ -797,10 +797,12 @@
797 797  * Example 1: Downlink Payload: 0100001E  ~/~/  Set Transmit Interval (TDC) = 30 seconds
798 798  * Example 2: Downlink Payload: 0100003C  ~/~/  Set Transmit Interval (TDC) = 60 seconds
799 799  
908 +
909 +
800 800  === 3.3.2 Get Device Status ===
801 801  
802 802  
803 -Send a LoRaWAN downlink to ask device send Alarm settings.
913 +Send a LoRaWAN downlink to ask the device to send its status.
804 804  
805 805  (% style="color:blue" %)**Downlink Payload:  **(%%)0x26 01
806 806  
... ... @@ -807,108 +807,159 @@
807 807  Sensor will upload Device Status via FPORT=5. See payload section for detail.
808 808  
809 809  
810 -=== 3.3.3 Set Temperature Alarm Threshold ===
920 +=== 3.3.3 Set Interrupt Mode ===
811 811  
812 -* (% style="color:blue" %)**AT Command:**
813 813  
814 -(% style="color:#037691" %)**AT+SHTEMP=min,max**
923 +Feature, Set Interrupt mode for GPIO_EXIT.
815 815  
816 -* When min=0, and max≠0, Alarm higher than max
817 -* When min≠0, and max=0, Alarm lower than min
818 -* When min≠0 and max≠0, Alarm higher than max or lower than min
925 +(% style="color:blue" %)**AT Command: AT+INTMOD1，AT+INTMOD2，AT+INTMOD3**
819 819  
820 -Example:
927 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
928 +|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
929 +|(% style="width:154px" %)AT+INTMOD1=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
930 +0
931 +OK
932 +the mode is 0 =Disable Interrupt
933 +)))
934 +|(% style="width:154px" %)AT+INTMOD1=2|(% style="width:196px" %)(((
935 +Set Transmit Interval
936 +0. (Disable Interrupt),
937 +~1. (Trigger by rising and falling edge)
938 +2. (Trigger by falling edge)
939 +3. (Trigger by rising edge)
940 +)))|(% style="width:157px" %)OK
941 +|(% style="width:154px" %)AT+INTMOD2=3|(% style="width:196px" %)(((
942 +Set Transmit Interval
821 821  
822 - AT+SHTEMP=0,30   ~/~/ Alarm when temperature higher than 30.
944 +trigger by rising edge.
945 +)))|(% style="width:157px" %)OK
946 +|(% style="width:154px" %)AT+INTMOD3=0|(% style="width:196px" %)Disable Interrupt|(% style="width:157px" %)OK
823 823  
824 -* (% style="color:blue" %)**Downlink Payload:**
948 +(% style="color:blue" %)**Downlink Command: 0x06**
825 825  
826 -(% style="color:#037691" %)**0x(0C 01 00 1E)**  (%%) ~/~/ Set AT+SHTEMP=0,30
950 +Format: Command Code (0x06) followed by 3 bytes.
827 827  
828 -(% style="color:red" %)**(note: 3^^rd^^ byte= 0x00 for low limit(not set), 4^^th^^ byte = 0x1E for high limit: 30)**
952 +This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
829 829  
954 +* Example 1: Downlink Payload: 06000000  **~-~-->**  AT+INTMOD1=0
955 +* Example 2: Downlink Payload: 06000003  **~-~-->**  AT+INTMOD1=3
956 +* Example 3: Downlink Payload: 06000102  **~-~-->**  AT+INTMOD2=2
957 +* Example 4: Downlink Payload: 06000201  **~-~-->**  AT+INTMOD3=1
830 830  
831 -=== 3.3.4 Set Humidity Alarm Threshold ===
832 832  
833 -* (% style="color:blue" %)**AT Command:**
834 834  
835 -(% style="color:#037691" %)**AT+SHHUM=min,max**
961 +=== 3.3.4 Set Power Output Duration ===
836 836  
837 -* When min=0, and max≠0, Alarm higher than max
838 -* When min≠0, and max=0, Alarm lower than min
839 -* When min≠0 and max≠0, Alarm higher than max or lower than min
840 840  
841 -Example:
964 +Control the output duration 5V . Before each sampling, device will
842 842  
843 - AT+SHHUM=70,0  ~/~/ Alarm when humidity lower than 70%.
966 +~1. first enable the power output to external sensor,
844 844  
845 -* (% style="color:blue" %)**Downlink Payload:**
968 +2. keep it on as per duration, read sensor value and construct uplink payload
846 846  
847 -(% style="color:#037691" %)**0x(0C 02 46 00)**(%%)  ~/~/ Set AT+SHTHUM=70,0
970 +3. final, close the power output.
848 848  
849 -(% style="color:red" %)**(note: 3^^rd^^ byte= 0x46 for low limit (70%), 4^^th^^ byte = 0x00 for high limit (not set))**
972 +(% style="color:blue" %)**AT Command: AT+5VT**
850 850  
974 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
975 +|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
976 +|(% style="width:154px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:157px" %)(((
977 +500(default)
978 +OK
979 +)))
980 +|(% style="width:154px" %)AT+5VT=1000|(% style="width:196px" %)(((
981 +Close after a delay of 1000 milliseconds.
982 +)))|(% style="width:157px" %)OK
851 851  
852 -=== 3.3.5 Set Alarm Interval ===
984 +(% style="color:blue" %)**Downlink Command: 0x07**
853 853  
854 -The shortest time of two Alarm packet. (unit: min)
986 +Format: Command Code (0x07) followed by 2 bytes.
855 855  
856 -* (% style="color:blue" %)**AT Command:**
988 +The first and second bytes are the time to turn on.
857 857  
858 -(% style="color:#037691" %)**AT+ATDC=30** (%%) ~/~/ The shortest interval of two Alarm packets is 30 minutes, Means is there is an alarm packet uplink, there won't be another one in the next 30 minutes.
990 +* Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
991 +* Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
859 859  
860 -* (% style="color:blue" %)**Downlink Payload:**
861 861  
862 -(% style="color:#037691" %)**0x(0D 00 1E)**(%%)     **~-~--> ** Set AT+ATDC=0x 00 1E = 30 minutes
863 863  
995 +=== 3.3.5 Set Weighing parameters ===
864 864  
865 -=== 3.3.6 Get Alarm settings ===
866 866  
998 +Feature: Working mode 5 is effective, weight initialization and weight factor setting of HX711.
867 867  
868 -Send a LoRaWAN downlink to ask device send Alarm settings.
1000 +(% style="color:blue" %)**AT Command: AT+WEIGRE,AT+WEIGAP**
869 869  
870 -* (% style="color:#037691" %)**Downlink Payload:  **(%%)0x0E 01
1002 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1003 +|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
1004 +|(% style="width:154px" %)AT+WEIGRE|(% style="width:196px" %)Weight is initialized to 0.|(% style="width:157px" %)OK
1005 +|(% style="width:154px" %)AT+WEIGAP=？|(% style="width:196px" %)400.0|(% style="width:157px" %)OK(default)
1006 +|(% style="width:154px" %)AT+WEIGAP=400.3|(% style="width:196px" %)Set the factor to 400.3.|(% style="width:157px" %)OK
871 871  
872 -**Example:**
1008 +(% style="color:blue" %)**Downlink Command: 0x08**
873 873  
874 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/1655948182791-225.png?rev=1.1||alt="1655948182791-225.png"]]
1010 +Format: Command Code (0x08) followed by 2 bytes or 4 bytes.
875 875  
1012 +Use AT+WEIGRE when the first byte is 1, only 1 byte. When it is 2, use AT+WEIGAP, there are 3 bytes.
876 876  
877 -**Explain:**
1014 +The second and third bytes are multiplied by 10 times to be the AT+WEIGAP value.
878 878  
879 -* Alarm & MOD bit is 0x7C, 0x7C >> 2 = 0x31: Means this message is the Alarm settings message.
1016 +* Example 1: Downlink Payload: 0801  **~-~-->**  AT+WEIGRE
1017 +* Example 2: Downlink Payload: 08020FA3  **~-~-->**  AT+WEIGAP=400.3
1018 +* Example 3: Downlink Payload: 08020FA0  **~-~-->**  AT+WEIGAP=400.0
880 880  
881 -=== 3.3.7 Set Interrupt Mode ===
882 882  
883 883  
884 -Feature, Set Interrupt mode for GPIO_EXIT.
1022 +=== 3.3.6 Set Digital pulse count value ===
885 885  
886 -(% style="color:blue" %)**AT Command: AT+INTMOD**
887 887  
1025 +Feature: Set the pulse count value.
1026 +
1027 +Count 1 is PA8 pin of mode 6 and mode 9. Count 2 is PA4 pin of mode 9.
1028 +
1029 +(% style="color:blue" %)**AT Command: AT+SETCNT**
1030 +
888 888  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
889 889  |=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
890 -|(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
891 -0
1033 +|(% style="width:154px" %)AT+SETCNT=1,100|(% style="width:196px" %)Initialize the count value 1 to 100.|(% style="width:157px" %)OK
1034 +|(% style="width:154px" %)AT+SETCNT=2,0|(% style="width:196px" %)Initialize the count value 2 to 0.|(% style="width:157px" %)OK
1035 +
1036 +(% style="color:blue" %)**Downlink Command: 0x09**
1037 +
1038 +Format: Command Code (0x09) followed by 5 bytes.
1039 +
1040 +The first byte is to select which count value to initialize, and the next four bytes are the count value to be initialized.
1041 +
1042 +* Example 1: Downlink Payload: 090100000000  **~-~-->**  AT+SETCNT=1,0
1043 +* Example 2: Downlink Payload: 0902000003E8  **~-~-->**  AT+SETCNT=2,1000
1044 +
1045 +
1046 +
1047 +=== 3.3.7 Set Workmode ===
1048 +
1049 +
1050 +Feature: Switch working mode.
1051 +
1052 +(% style="color:blue" %)**AT Command: AT+MOD**
1053 +
1054 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1055 +|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
1056 +|(% style="width:154px" %)AT+MOD=?|(% style="width:196px" %)Get the current working mode.|(% style="width:157px" %)(((
892 892  OK
893 -the mode is 0 =Disable Interrupt
894 894  )))
895 -|(% style="width:154px" %)AT+INTMOD=2|(% style="width:196px" %)(((
896 -Set Transmit Interval
897 -0. (Disable Interrupt),
898 -~1. (Trigger by rising and falling edge)
899 -2. (Trigger by falling edge)
900 -3. (Trigger by rising edge)
901 -)))|(% style="width:157px" %)OK
1059 +|(% style="width:154px" %)AT+MOD=4|(% style="width:196px" %)Set the working mode to 3DS18B20s.|(% style="width:157px" %)(((
1060 +OK
1061 +Attention:Take effect after ATZ
1062 +)))
902 902  
903 -(% style="color:blue" %)**Downlink Command: 0x06**
1064 +(% style="color:blue" %)**Downlink Command: 0x0A**
904 904  
905 -Format: Command Code (0x06) followed by 3 bytes.
1066 +Format: Command Code (0x0A) followed by 1 bytes.
906 906  
907 -This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
1068 +* Example 1: Downlink Payload: 0A01  **~-~-->**  AT+MOD=1
1069 +* Example 2: Downlink Payload: 0A04  **~-~-->**  AT+MOD=4
908 908  
909 -* Example 1: Downlink Payload: 06000000  ~/~/  Turn off interrupt mode
910 -* Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
911 911  
1072 +
912 912  = 4. Battery & Power Consumption =
913 913  
914 914  
... ... @@ -935,10 +935,18 @@
935 935  * (Recommanded way) OTA firmware update via wireless:   [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
936 936  * Update through UART TTL interface.**[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
937 937  
1099 +
1100 +
938 938  = 6. FAQ =
939 939  
1103 +== 6.1 Where can i find source code of SN50v3-LB? ==
940 940  
941 941  
1106 +* **[[Hardware Source Files>>https://github.com/dragino/Lora/tree/master/LSN50/v3.0]].**
1107 +* **[[Software Source Code & Compile instruction>>https://github.com/dragino/SN50v3]].**
1108 +
1109 +
1110 +
942 942  = 7. Order Info =
943 943  
944 944  
... ... @@ -962,8 +962,11 @@
962 962  * (% style="color:red" %)**20**(%%): With M20 waterproof cable hole
963 963  * (% style="color:red" %)**NH**(%%): No Hole
964 964  
1134 +
1135 +
965 965  = 8. ​Packing Info =
966 966  
1138 +
967 967  (% style="color:#037691" %)**Package Includes**:
968 968  
969 969  * SN50v3-LB LoRaWAN Generic Node
... ... @@ -975,8 +975,11 @@
975 975  * Package Size / pcs : cm
976 976  * Weight / pcs : g
977 977  
1150 +
1151 +
978 978  = 9. Support =
979 979  
980 980  
981 981  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
982 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
1156 +
1157 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.cc>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.cc]]
image-20230512163509-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +1.5 MB
Content
image-20230512164658-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +2.0 MB
Content
image-20230512170701-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +2.5 MB
Content
image-20230512172447-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +2.0 MB
Content
image-20230512173758-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +2.1 MB
Content
image-20230512173903-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +2.3 MB
Content
image-20230512180609-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +2.3 MB
Content
image-20230512180718-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +2.3 MB
Content
image-20230512181814-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +2.2 MB
Content
image-20230513084523-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +611.3 KB
Content
image-20230513102034-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +607.1 KB
Content
image-20230513103633-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +595.5 KB
Content
image-20230513105207-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +384.7 KB
Content
image-20230513105351-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +37.6 KB
Content
image-20230513110214-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +172.7 KB
Content
image-20230513111203-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +79.9 KB
Content
image-20230513111231-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +64.9 KB
Content
image-20230513111255-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +70.4 KB
Content
image-20230513134006-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +1.9 MB
Content
image-20230515135611-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +948.0 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0