Last modified by Bei Jinggeng on 2025/01/10 15:51
<
From version < 103.1 >
edited by Mengting Qiu
on 2024/11/12 10:10
To version < 99.1 >
edited by Xiaoling
on 2024/09/24 11:28
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.ting
1 +XWiki.Xiaoling
Content
... ... @@ -22,7 +22,7 @@
22 22  == 1.1 What is SN50v3-LB/LS LoRaWAN Generic Node ==
23 23  
24 24  
25 -(% style="color:blue" %)**SN50V3-LB/LS **(%%)LoRaWAN Sensor Node is a Long Range LoRa Sensor Node. It is designed for outdoor use and powered by (% style="color:blue" %)** 8500mAh Li/SOCl2 battery**(%%)  or (% style="color:blue" %)**solar powered + Li-ion battery**(%%) for long term use.SN50V3-LB/LS is designed to facilitate developers to quickly deploy industrial level LoRa and IoT solutions. It help users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to program, create and connect your things everywhere.
25 +(% style="color:blue" %)**SN50V3-LB/LS **(%%)LoRaWAN Sensor Node is a Long Range LoRa Sensor Node. It is designed for outdoor use and powered by (% style="color:blue" %)** 8500mAh Li/SOCl2 battery**(%%)  or (% style="color:blue" %)**solar powered + li-on battery**(%%) for long term use.SN50V3-LB/LS is designed to facilitate developers to quickly deploy industrial level LoRa and IoT solutions. It help users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to program, create and connect your things everywhere.
26 26  
27 27  (% style="color:blue" %)**SN50V3-LB/LS wireless part**(%%) is based on SX1262 allows the user to send data and reach extremely long ranges at low data-rates.It provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, and so on.
28 28  
... ... @@ -44,7 +44,7 @@
44 44  * Uplink on periodically
45 45  * Downlink to change configure
46 46  * 8500mAh Li/SOCl2 Battery (SN50v3-LB)
47 -* Solar panel + 3000mAh Li-ion battery (SN50v3-LS)
47 +* Solar panel + 3000mAh Li-on battery (SN50v3-LS)
48 48  
49 49  == 1.3 Specification ==
50 50  
... ... @@ -688,7 +688,7 @@
688 688  
689 689  
690 690  
691 -==== 2.3.2.11  MOD~=11 (TEMP117)(Since firmware V1.3.0) ====
691 +==== 2.3.2.11  MOD~=11 (TEMP117) ====
692 692  
693 693  
694 694  In this mode, uplink payload includes in total 11 bytes. Uplink packets use FPORT=2.
... ... @@ -718,7 +718,7 @@
718 718  [[image:image-20240717141528-2.jpeg||height="430" width="654"]]
719 719  
720 720  
721 -==== 2.3.2.12  MOD~=12 (Count+SHT31)(Since firmware V1.3.1) ====
721 +==== 2.3.2.12  MOD~=12 (Count+SHT31) ====
722 722  
723 723  
724 724  This mode has total 11 bytes. As shown below:
... ... @@ -1104,47 +1104,41 @@
1104 1104  === 3.3.3 Set Interrupt Mode ===
1105 1105  
1106 1106  
1107 -Feature, Set Interrupt mode for PB14, PB15, PA4.
1107 +Feature, Set Interrupt mode for GPIO_EXIT.
1108 1108  
1109 -Before using the interrupt function of the **INT** pin, users can set the interrupt triggering mode as required.
1109 +(% style="color:blue" %)**AT Command: AT+INTMOD1,AT+INTMOD2,AT+INTMOD3**
1110 1110  
1111 -(% style="color:#037691" %)**AT Command:**(% style="color:blue" %)** **(% style="color:#4472c4" %)**AT+INTMODx**
1111 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1112 +|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 197px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 158px;background-color:#4F81BD;color:white" %)**Response**
1113 +|(% style="width:154px" %)AT+INTMOD1=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
1114 +0
1115 +OK
1116 +the mode is 0 =Disable Interrupt
1117 +)))
1118 +|(% style="width:154px" %)AT+INTMOD1=2|(% style="width:196px" %)(((
1119 +Set Transmit Interval
1120 +0. (Disable Interrupt),
1121 +~1. (Trigger by rising and falling edge)
1122 +2. (Trigger by falling edge)
1123 +3. (Trigger by rising edge)
1124 +)))|(% style="width:157px" %)OK
1125 +|(% style="width:154px" %)AT+INTMOD2=3|(% style="width:196px" %)(((
1126 +Set Transmit Interval
1127 +trigger by rising edge.
1128 +)))|(% style="width:157px" %)OK
1129 +|(% style="width:154px" %)AT+INTMOD3=0|(% style="width:196px" %)Disable Interrupt|(% style="width:157px" %)OK
1112 1112  
1113 -(% style="color:#4472c4" %)**AT+INTMODx:**
1131 +(% style="color:blue" %)**Downlink Command: 0x06**
1114 1114  
1115 -* (% style="color:#4472c4" %)**AT+INTMOD1   **(%%)~/~/ Set the interrupt mode for (% style="background-color:yellow" %)** PB14**(%%) pin.
1116 -* (% style="color:#4472c4" %)**AT+INTMOD2   **(%%)~/~/ Set the interrupt mode for (% style="background-color:yellow" %)** PB15**(%%) pin.
1117 -* (% style="color:#4472c4" %)**AT+INTMOD3   **(%%)~/~/ Set the interrupt mode for (% style="background-color:yellow" %)** PA4**(%%) pin.
1118 -
1119 -**Parameter setting:**
1120 -
1121 -* **0:** Disable Interrupt
1122 -* **1:** Trigger by rising and falling edge
1123 -* **2:** Trigger by falling edge
1124 -* **3: **Trigger by rising edge
1125 -
1126 -**Example:**
1127 -
1128 -* AT+INTMOD1=0  ~/~/Disable the PB14 pin interrupt function
1129 -* AT+INTMOD2=2  ~/~/Set the interrupt of the PB15 pin to be triggered by the falling edge
1130 -* AT+INTMOD3=3  ~/~/Set the interrupt of the PA4 pin to be triggered by the rising edge
1131 -
1132 -(% style="color:#037691" %)**Downlink Command:**(% style="color:blue" %)** **(% style="color:#4472c4" %)**0x06 00 aa bb**
1133 -
1134 1134  Format: Command Code (0x06) followed by 3 bytes.
1135 1135  
1136 -(% style="color:#4472c4" %)**aa:**(%%) Set the corresponding pin. ((% style="background-color:yellow" %)**00**(%%): PB14 Pin;  (% style="background-color:yellow" %)**01**(%%)**: **PB15 Pin;  (% style="background-color:yellow" %)**02**(%%): PA4 Pin.)
1135 +This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
1137 1137  
1138 -(% style="color:#4472c4" %)**bb: **(%%)Set interrupt mode. ((% style="background-color:yellow" %)**00**(%%) Disable, (% style="background-color:yellow" %)**01**(%%) falling or rising, (% style="background-color:yellow" %)**02**(%%) falling, (% style="background-color:yellow" %)**03**(%%) rising)
1137 +* Example 1: Downlink Payload: 06000000  **~-~-->**  AT+INTMOD1=0
1138 +* Example 2: Downlink Payload: 06000003  **~-~-->**  AT+INTMOD1=3
1139 +* Example 3: Downlink Payload: 06000102  **~-~-->**  AT+INTMOD2=2
1140 +* Example 4: Downlink Payload: 06000201  **~-~-->**  AT+INTMOD3=1
1139 1139  
1140 -**Example:**
1141 -
1142 -* Downlink Payload: **06 00 00 01     **~/~/ Equal to AT+INTMOD1=1
1143 -* Downlink Payload: **06 00 01 02     **~/~/ Equal to AT+INTMOD2=2
1144 -* Downlink Payload: **06 00 02 03     **~/~/ Equal to AT+INTMOD3=3
1145 -
1146 -
1147 -
1148 1148  === 3.3.4 Set Power Output Duration ===
1149 1149  
1150 1150  
... ... @@ -1360,39 +1360,21 @@
1360 1360  * (Recommanded way) OTA firmware update via wireless: **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**
1361 1361  * Update through UART TTL interface: **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
1362 1362  
1363 -= 6.  Developer Guide =
1357 += 6. FAQ =
1364 1364  
1365 -SN50v3 is an open source project, developer can use compile their firmware for customized applications. User can get the source code from:
1359 +== 6.1 Where can i find source code of SN50v3-LB/LS? ==
1366 1366  
1367 -* (((
1368 -Software Source Code: [[Releases · dragino/SN50v3 (github.com)>>url:https://github.com/dragino/SN50v3/releases]]
1369 -)))
1370 -* (((
1371 -Hardware Design files:  **[[Hardware Source Files>>https://github.com/dragino/Lora/tree/master/LSN50/v3.0]].**
1372 -)))
1373 -* (((
1374 -Compile instruction:[[Compile instruction>>https://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LA66%20LoRaWAN%20Module/Compile%20and%20Upload%20Code%20to%20ASR6601%20Platform/]]
1375 -)))
1376 1376  
1377 -**~1. If you want to change frequency, modify the Preprocessor Symbols.**
1362 +* **[[Hardware Source Files>>https://github.com/dragino/Lora/tree/master/LSN50/v3.0]].**
1363 +* **[[Software Source Code & Compile instruction>>https://github.com/dragino/SN50v3]].**
1378 1378  
1379 -For example, change EU868 to US915
1365 +== 6.2 How to generate PWM Output in SN50v3-LB/LS? ==
1380 1380  
1381 -[[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656318662202-530.png?rev=1.1||alt="1656318662202-530.png"]]
1382 1382  
1383 -**2. Compile and build**
1384 -
1385 -[[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220627163212-17.png?rev=1.1||alt="image-20220627163212-17.png"]]
1386 -
1387 -= 7. FAQ =
1388 -
1389 -== 7.1 How to generate PWM Output in SN50v3-LB/LS? ==
1390 -
1391 -
1392 1392  See this document: **[[Generate PWM Output on SN50v3>>https://www.dropbox.com/scl/fi/r3trcet2knujg40w0mgyn/Generate-PWM-Output-on-SN50v3.pdf?rlkey=rxsgmrhhrv62iiiwjq9sv10bn&dl=0]]**.
1393 1393  
1394 1394  
1395 -== 7.2 How to put several sensors to a SN50v3-LB/LS? ==
1371 +== 6.3 How to put several sensors to a SN50v3-LB/LS? ==
1396 1396  
1397 1397  
1398 1398  When we want to put several sensors to A SN50v3-LB/LS, the waterproof at the grand connector will become an issue. User can try to exchange the grand connector to below type.
... ... @@ -1402,7 +1402,7 @@
1402 1402  [[image:image-20230810121434-1.png||height="242" width="656"]]
1403 1403  
1404 1404  
1405 -= 8. Order Info =
1381 += 7. Order Info =
1406 1406  
1407 1407  
1408 1408  Part Number: (% style="color:blue" %)**SN50v3-LB-XX-YY**(%%) or (% style="color:blue" %)**SN50v3-LS-XX-YY**
... ... @@ -1425,7 +1425,7 @@
1425 1425  * (% style="color:red" %)**20**(%%): With M20 waterproof cable hole
1426 1426  * (% style="color:red" %)**NH**(%%): No Hole
1427 1427  
1428 -= 9. ​Packing Info =
1404 += 8. ​Packing Info =
1429 1429  
1430 1430  
1431 1431  (% style="color:#037691" %)**Package Includes**:
... ... @@ -1439,7 +1439,7 @@
1439 1439  * Package Size / pcs : cm
1440 1440  * Weight / pcs : g
1441 1441  
1442 -= 10. Support =
1418 += 9. Support =
1443 1443  
1444 1444  
1445 1445  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0