Wiki source code of SN50v3-LB LoRaWAN Sensor Node User Manual

Version 70.1 by Saxer Lin on 2023/08/17 18:34

version	line-number	content
41.2	1	(% style="text-align:center" %)
	2	[[image:image-20230515135611-1.jpeg\|\|height="589" width="589"]]
2.1	3
	4
	5
	6	Table of Contents：
	7
	8	{{toc/}}
	9
	10
	11
	12
	13
	14
	15	= 1. Introduction =
	16
5.1	17	== 1.1 What is SN50v3-LB LoRaWAN Generic Node ==
2.1	18
43.2	19
4.1	20	(% style="color:blue" %)SN50V3-LB (%%)LoRaWAN Sensor Node is a Long Range LoRa Sensor Node. It is designed for outdoor use and powered by (% style="color:blue" %) 8500mA Li/SOCl2 battery(%%) for long term use.SN50V3-LB is designed to facilitate developers to quickly deploy industrial level LoRa and IoT solutions. It help users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to program, create and connect your things everywhere.
2.1	21
4.1	22	(% style="color:blue" %)SN50V3-LB wireless part(%%) is based on SX1262 allows the user to send data and reach extremely long ranges at low data-rates.It provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption.It targets professional wireless sensor network applications such as irrigation systems, smart metering, smart cities, smartphone detection, building automation, and so on.
2.1	23
4.1	24	(% style="color:blue" %)SN50V3-LB (%%)has a powerful 48Mhz ARM microcontroller with 256KB flash and 64KB RAM. It has multiplex I/O pins to connect to different sensors.
2.1	25
4.1	26	(% style="color:blue" %)SN50V3-LB(%%) has a built-in BLE module, user can configure the sensor remotely via Mobile Phone. It also support OTA upgrade via private LoRa protocol for easy maintaining.
2.1	27
4.1	28	SN50V3-LB is the 3^^rd^^ generation of LSN50 series generic sensor node from Dragino. It is an (% style="color:blue" %)open source project(%%) and has a mature LoRaWAN stack and application software. User can use the pre-load software for their IoT projects or easily customize the software for different requirements.
2.1	29
4.1	30
2.1	31	== 1.2 Features ==
	32
43.44	33
2.1	34	* LoRaWAN 1.0.3 Class A
	35	* Ultra-low power consumption
5.1	36	* Open-Source hardware/software
2.1	37	* Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
	38	* Support Bluetooth v5.1 and LoRaWAN remote configure
	39	* Support wireless OTA update firmware
	40	* Uplink on periodically
	41	* Downlink to change configure
	42	* 8500mAh Battery for long term use
	43
	44	== 1.3 Specification ==
	45
43.4	46
2.1	47	(% style="color:#037691" %)Common DC Characteristics:
	48
	49	* Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
	50	* Operating Temperature: -40 ~~ 85°C
	51
5.1	52	(% style="color:#037691" %)I/O Interface:
2.1	53
5.1	54	* Battery output (2.6v ~~ 3.6v depends on battery)
	55	* +5v controllable output
	56	* 3 x Interrupt or Digital IN/OUT pins
	57	* 3 x one-wire interfaces
	58	* 1 x UART Interface
	59	* 1 x I2C Interface
2.1	60
	61	(% style="color:#037691" %)LoRa Spec:
	62
	63	* Frequency Range, Band 1 (HF): 862 ~~ 1020 Mhz
	64	* Max +22 dBm constant RF output vs.
	65	* RX sensitivity: down to -139 dBm.
	66	* Excellent blocking immunity
	67
	68	(% style="color:#037691" %)Battery:
	69
	70	* Li/SOCI2 un-chargeable battery
	71	* Capacity: 8500mAh
	72	* Self-Discharge: <1% / Year @ 25°C
	73	* Max continuously current: 130mA
	74	* Max boost current: 2A, 1 second
	75
	76	(% style="color:#037691" %)Power Consumption
	77
	78	* Sleep Mode: 5uA @ 3.3v
	79	* LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
	80
	81	== 1.4 Sleep mode and working mode ==
	82
43.4	83
2.1	84	(% style="color:blue" %)Deep Sleep Mode: (%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
	85
	86	(% style="color:blue" %)Working Mode: (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
	87
	88
	89	== 1.5 Button & LEDs ==
	90
	91
	92	[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675071855856-879.png]]
	93
	94
	95	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
	96	\|=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)Behavior on ACT\|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)Function\|=(% style="width: 225px;background-color:#D9E2F3;color:#0070C0" %)Action
	97	\|(% style="width:167px" %)Pressing ACT between 1s < time < 3s\|(% style="width:117px" %)Send an uplink\|(% style="width:225px" %)(((
	98	If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, (% style="color:blue" %)blue led (%%)will blink once.
	99	Meanwhile, BLE module will be active and user can connect via BLE to configure device.
	100	)))
	101	\|(% style="width:167px" %)Pressing ACT for more than 3s\|(% style="width:117px" %)Active Device\|(% style="width:225px" %)(((
	102	(% style="color:green" %)Green led(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)OTA mode(%%) for 3 seconds. And then start to JOIN LoRaWAN network.
	103	(% style="color:green" %)Green led(%%) will solidly turn on for 5 seconds after joined in network.
	104	Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device join or not join LoRaWAN network.
	105	)))
	106	\|(% style="width:167px" %)Fast press ACT 5 times.\|(% style="width:117px" %)Deactivate Device\|(% style="width:225px" %)(% style="color:red" %)Red led(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
	107
	108	== 1.6 BLE connection ==
	109
	110
5.1	111	SN50v3-LB supports BLE remote configure.
2.1	112
	113
	114	BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
	115
	116	* Press button to send an uplink
	117	* Press button to active device.
	118	* Device Power on or reset.
	119
	120	If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
	121
	122
6.1	123	== 1.7 Pin Definitions ==
2.1	124
	125
49.1	126	[[image:image-20230610163213-1.png\|\|height="404" width="699"]]
2.1	127
	128
	129	== 1.8 Mechanical ==
	130
	131
	132	[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
	133
	134	[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143899218-599.png]]
	135
	136	[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
	137
	138
44.5	139	== 1.9 Hole Option ==
5.1	140
43.4	141
5.1	142	SN50v3-LB has different hole size options for different size sensor cable. The options provided are M12, M16 and M20. The definition is as below:
	143
	144	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220627104757-1.png?rev=1.1\|\|alt="image-20220627104757-1.png"]]
	145
	146	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656298089706-973.png?rev=1.1\|\|alt="1656298089706-973.png"]]
	147
	148
10.1	149	= 2. Configure SN50v3-LB to connect to LoRaWAN network =
2.1	150
	151	== 2.1 How it works ==
	152
	153
44.3	154	The SN50v3-LB is configured as (% style="color:#037691" %)LoRaWAN OTAA Class A(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the SN50v3-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
2.1	155
	156
	157	== 2.2 Quick guide to connect to LoRaWAN server (OTAA) ==
	158
	159
	160	Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
	161
44.3	162	The LPS8v2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
2.1	163
	164
11.2	165	(% style="color:blue" %)Step 1:(%%) Create a device in TTN with the OTAA keys from SN50v3-LB.
2.1	166
11.2	167	Each SN50v3-LB is shipped with a sticker with the default device EUI as below:
2.1	168
11.2	169	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/S31-LB_S31B-LB/WebHome/image-20230426084152-1.png?width=502&height=233&rev=1.1\|\|alt="图片-20230426084152-1.png" height="233" width="502"]]
2.1	170
	171
	172	You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
	173
	174
	175	(% style="color:blue" %)Register the device
	176
	177	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/1654935135620-998.png?rev=1.1\|\|alt="1654935135620-998.png"]]
	178
	179
	180	(% style="color:blue" %)Add APP EUI and DEV EUI
	181
	182	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-4.png?width=753&height=551&rev=1.1\|\|alt="图片-20220611161308-4.png"]]
	183
	184
	185	(% style="color:blue" %)Add APP EUI in the application
	186
	187
	188	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-5.png?width=742&height=601&rev=1.1\|\|alt="图片-20220611161308-5.png"]]
	189
	190
	191	(% style="color:blue" %)Add APP KEY
	192
	193	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1\|\|alt="图片-20220611161308-6.png"]]
	194
	195
11.2	196	(% style="color:blue" %)Step 2:(%%) Activate SN50v3-LB
2.1	197
	198
11.2	199	Press the button for 5 seconds to activate the SN50v3-LB.
2.1	200
	201	(% style="color:green" %)Green led(%%) will fast blink 5 times, device will enter (% style="color:blue" %)OTA mode(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)Green led(%%) will solidly turn on for 5 seconds after joined in network.
	202
	203	After join success, it will start to upload messages to TTN and you can see the messages in the panel.
	204
	205
	206	== 2.3 Uplink Payload ==
	207
	208	=== 2.3.1 Device Status, FPORT~=5 ===
	209
	210
44.3	211	Users can use the downlink command(0x26 01) to ask SN50v3-LB to send device configure detail, include device configure status. SN50v3-LB will uplink a payload via FPort=5 to server.
2.1	212
	213	The Payload format is as below.
	214
	215
	216	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
	217	\|(% colspan="6" style="background-color:#d9e2f3; color:#0070c0" %)Device Status (FPORT=5)
	218	\|(% style="width:103px" %)Size (bytes)\|(% style="width:72px" %)1\|2\|(% style="width:91px" %)1\|(% style="width:86px" %)1\|(% style="width:44px" %)2
45.4	219	\|(% style="width:103px" %)Value\|(% style="width:72px" %)Sensor Model\|Firmware Version\|(% style="width:91px" %)Frequency Band\|(% style="width:86px" %)Sub-band\|(% style="width:44px" %)BAT
2.1	220
	221	Example parse in TTNv3
	222
	223
44.3	224	(% style="color:#037691" %)Sensor Model(%%): For SN50v3-LB, this value is 0x1C
2.1	225
	226	(% style="color:#037691" %)Firmware Version(%%): 0x0100, Means: v1.0.0 version
	227
	228	(% style="color:#037691" %)Frequency Band:
	229
53.2	230	0x01: EU868
2.1	231
53.2	232	0x02: US915
2.1	233
53.2	234	0x03: IN865
2.1	235
53.2	236	0x04: AU915
2.1	237
53.2	238	0x05: KZ865
2.1	239
53.2	240	0x06: RU864
2.1	241
53.2	242	0x07: AS923
2.1	243
53.2	244	0x08: AS923-1
2.1	245
53.2	246	0x09: AS923-2
2.1	247
53.2	248	0x0a: AS923-3
2.1	249
53.2	250	0x0b: CN470
2.1	251
53.2	252	0x0c: EU433
2.1	253
53.2	254	0x0d: KR920
2.1	255
53.2	256	0x0e: MA869
2.1	257
	258
	259	(% style="color:#037691" %)Sub-Band:
	260
	261	AU915 and US915:value 0x00 ~~ 0x08
	262
	263	CN470: value 0x0B ~~ 0x0C
	264
	265	Other Bands: Always 0x00
	266
	267
	268	(% style="color:#037691" %)Battery Info:
	269
	270	Check the battery voltage.
	271
	272	Ex1: 0x0B45 = 2885mV
	273
	274	Ex2: 0x0B49 = 2889mV
	275
	276
12.1	277	=== 2.3.2 Working Modes & Sensor Data. Uplink via FPORT~=2 ===
2.1	278
	279
44.2	280	SN50v3-LB has different working mode for the connections of different type of sensors. This section describes these modes. Use can use the AT Command (% style="color:blue" %)AT+MOD(%%) to set SN50v3-LB to different working modes.
12.1	281
	282	For example:
	283
44.2	284	(% style="color:blue" %)AT+MOD=2 (%%) ~/~/ will set the SN50v3 to work in MOD=2 distance mode which target to measure distance via Ultrasonic Sensor.
12.1	285
	286
13.1	287	(% style="color:red" %) Important Notice:
12.1	288
44.3	289	~1. Some working modes has payload more than 12 bytes, The US915/AU915/AS923 frequency bands' definition has maximum 11 bytes in (% style="color:blue" %)DR0(%%). Server sides will see NULL payload while SN50v3-LB transmit in DR0 with 12 bytes payload.
12.1	290
44.2	291	2. All modes share the same Payload Explanation from HERE.
43.53	292
44.2	293	3. By default, the device will send an uplink message every 20 minutes.
	294
	295
13.1	296	==== 2.3.2.1 MOD~=1 (Default Mode) ====
12.1	297
43.5	298
12.1	299	In this mode, uplink payload includes in total 11 bytes. Uplink packets use FPORT=2.
	300
43.5	301	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
43.54	302	\|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)Size(bytes)\|(% style="background-color:#d9e2f3; color:#0070c0; width:20px" %)2\|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)2\|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)2\|(% style="background-color:#d9e2f3; color:#0070c0; width:90px" %)1\|(% style="background-color:#d9e2f3; color:#0070c0; width:130px" %)2\|(% style="background-color:#d9e2f3; color:#0070c0; width:80px" %)2
45.4	303	\|Value\|Bat\|(% style="width:191px" %)(((
43.12	304	Temperature(DS18B20)(PC13)
40.1	305	)))\|(% style="width:78px" %)(((
43.12	306	ADC(PA4)
26.2	307	)))\|(% style="width:216px" %)(((
43.13	308	Digital in(PB15)&Digital Interrupt(PA8)
40.1	309	)))\|(% style="width:308px" %)(((
43.12	310	Temperature(SHT20 or SHT31 or BH1750 Illumination Sensor)
40.1	311	)))\|(% style="width:154px" %)(((
43.12	312	Humidity(SHT20 or SHT31)
36.1	313	)))
	314
12.1	315	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220627150949-6.png?rev=1.1\|\|alt="image-20220627150949-6.png"]]
	316
	317
13.1	318	==== 2.3.2.2 MOD~=2 (Distance Mode) ====
	319
43.45	320
12.1	321	This mode is target to measure the distance. The payload of this mode is totally 11 bytes. The 8^^th^^ and 9^^th^^ bytes is for the distance.
	322
43.14	323	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
43.54	324	\|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)Size(bytes)\|(% style="background-color:#d9e2f3; color:#0070c0; width:30px" %)2\|(% style="background-color:#d9e2f3; color:#0070c0; width:110px" %)2\|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)2\|(% style="background-color:#d9e2f3; color:#0070c0; width:110px" %)1\|(% style="background-color:#d9e2f3; color:#0070c0; width:140px" %)2\|(% style="background-color:#d9e2f3; color:#0070c0; width:40px" %)2
45.4	325	\|Value\|BAT\|(% style="width:196px" %)(((
43.16	326	Temperature(DS18B20)(PC13)
40.1	327	)))\|(% style="width:87px" %)(((
43.16	328	ADC(PA4)
40.1	329	)))\|(% style="width:189px" %)(((
43.16	330	Digital in(PB15) & Digital Interrupt(PA8)
40.1	331	)))\|(% style="width:208px" %)(((
53.2	332	Distance measure by: 1) LIDAR-Lite V3HP
	333	Or 2) Ultrasonic Sensor
40.1	334	)))\|(% style="width:117px" %)Reserved
12.1	335
	336	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656324539647-568.png?rev=1.1\|\|alt="1656324539647-568.png"]]
	337
43.45	338
43.17	339	(% style="color:blue" %)Connection of LIDAR-Lite V3HP:
12.1	340
26.2	341	[[image:image-20230512173758-5.png\|\|height="563" width="712"]]
12.1	342
43.45	343
43.17	344	(% style="color:blue" %)Connection to Ultrasonic Sensor:
12.1	345
44.1	346	(% style="color:red" %)Need to remove R1 and R2 resistors to get low power,otherwise there will be 240uA standby current.
36.1	347
26.2	348	[[image:image-20230512173903-6.png\|\|height="596" width="715"]]
12.1	349
43.45	350
12.1	351	For the connection to TF-Mini or TF-Luna , MOD2 payload is as below:
	352
43.19	353	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
43.44	354	\|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)Size(bytes)\|(% style="background-color:#d9e2f3; color:#0070c0; width:20px" %)2\|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)2\|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)1\|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)2\|(% style="background-color:#d9e2f3; color:#0070c0; width:120px" %)2\|(% style="background-color:#d9e2f3; color:#0070c0; width:80px" %)2
45.5	355	\|Value\|BAT\|(% style="width:183px" %)(((
43.19	356	Temperature(DS18B20)(PC13)
40.1	357	)))\|(% style="width:173px" %)(((
43.19	358	Digital in(PB15) & Digital Interrupt(PA8)
40.1	359	)))\|(% style="width:84px" %)(((
43.19	360	ADC(PA4)
40.1	361	)))\|(% style="width:323px" %)(((
12.1	362	Distance measure by:1)TF-Mini plus LiDAR
53.3	363	Or 2) TF-Luna LiDAR
40.1	364	)))\|(% style="width:188px" %)Distance signal strength
12.1	365
	366	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656376779088-686.png?rev=1.1\|\|alt="1656376779088-686.png"]]
	367
43.45	368
12.1	369	Connection to [[TF-Mini plus>>url:http://en.benewake.com/product/detail/5c345cd0e5b3a844c472329b.html]] LiDAR(UART version):
	370
44.1	371	(% style="color:red" %)Need to remove R3 and R4 resistors to get low power,otherwise there will be 400uA standby current.
12.1	372
26.2	373	[[image:image-20230512180609-7.png\|\|height="555" width="802"]]
12.1	374
43.45	375
12.1	376	Connection to [[TF-Luna>>url:http://en.benewake.com/product/detail/5e1c1fd04d839408076b6255.html]] LiDAR (UART version):
	377
44.1	378	(% style="color:red" %)Need to remove R3 and R4 resistors to get low power,otherwise there will be 400uA standby current.
12.1	379
52.1	380	[[image:image-20230610170047-1.png\|\|height="452" width="799"]]
12.1	381
	382
13.1	383	==== 2.3.2.3 MOD~=3 (3 ADC + I2C) ====
	384
43.45	385
12.1	386	This mode has total 12 bytes. Include 3 x ADC + 1x I2C
	387
43.21	388	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
43.25	389	\|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
	390	Size(bytes)
43.54	391	)))\|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)2\|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)2\|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)2\|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)1\|=(% style="width: 110px;background-color:#D9E2F3;color:#0070C0" %)2\|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)2\|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)1
45.4	392	\|Value\|(% style="width:68px" %)(((
43.23	393	ADC1(PA4)
26.2	394	)))\|(% style="width:75px" %)(((
43.23	395	ADC2(PA5)
36.1	396	)))\|(((
43.23	397	ADC3(PA8)
36.1	398	)))\|(((
	399	Digital Interrupt(PB15)
	400	)))\|(% style="width:304px" %)(((
43.23	401	Temperature(SHT20 or SHT31 or BH1750 Illumination Sensor)
36.1	402	)))\|(% style="width:163px" %)(((
43.23	403	Humidity(SHT20 or SHT31)
36.1	404	)))\|(% style="width:53px" %)Bat
	405
	406	[[image:image-20230513110214-6.png]]
	407
	408
13.1	409	==== 2.3.2.4 MOD~=4 (3 x DS18B20) ====
	410
12.1	411
26.2	412	This mode has total 11 bytes. As shown below:
12.1	413
43.26	414	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
43.44	415	\|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)Size(bytes)\|(% style="background-color:#d9e2f3; color:#0070c0; width:20px" %)2\|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)2\|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)2\|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)1\|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)2\|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)2
45.4	416	\|Value\|BAT\|(% style="width:186px" %)(((
43.27	417	Temperature1(DS18B20)(PC13)
26.2	418	)))\|(% style="width:82px" %)(((
43.27	419	ADC(PA4)
26.2	420	)))\|(% style="width:210px" %)(((
43.27	421	Digital in(PB15) & Digital Interrupt(PA8)
26.2	422	)))\|(% style="width:191px" %)Temperature2(DS18B20)
43.27	423	(PB9)\|(% style="width:183px" %)Temperature3(DS18B20)(PB8)
12.1	424
	425	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656377606181-607.png?rev=1.1\|\|alt="1656377606181-607.png"]]
	426
44.4	427
39.2	428	[[image:image-20230513134006-1.png\|\|height="559" width="736"]]
12.1	429
39.1	430
13.1	431	==== 2.3.2.5 MOD~=5(Weight Measurement by HX711) ====
	432
43.45	433
26.2	434	[[image:image-20230512164658-2.png\|\|height="532" width="729"]]
12.1	435
	436	Each HX711 need to be calibrated before used. User need to do below two steps:
	437
44.2	438	1. Zero calibration. Don't put anything on load cell and run (% style="color:blue" %)AT+WEIGRE(%%) to calibrate to Zero gram.
	439	1. Adjust calibration factor (default value 400): Put a known weight thing on load cell and run (% style="color:blue" %)AT+WEIGAP(%%) to adjust the Calibration Factor.
12.1	440	1. (((
26.2	441	Weight has 4 bytes, the unit is g.
43.53	442
	443
	444
12.1	445	)))
	446
	447	For example:
	448
44.2	449	(% style="color:blue" %)AT+GETSENSORVALUE =0
12.1	450
	451	Response: Weight is 401 g
	452
	453	Check the response of this command and adjust the value to match the real value for thing.
	454
43.29	455	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
	456	\|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
12.1	457	Size(bytes)
43.30	458	)))\|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)2\|=(% style="width: 150px;background-color:#D9E2F3;color:#0070C0" %)2\|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)2\|=(% style="width: 200px;background-color:#D9E2F3;color:#0070C0" %)1\|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)4
45.4	459	\|Value\|BAT\|(% style="width:193px" %)(((
43.55	460	Temperature(DS18B20)(PC13)
40.1	461	)))\|(% style="width:85px" %)(((
43.31	462	ADC(PA4)
40.1	463	)))\|(% style="width:186px" %)(((
43.55	464	Digital in(PB15) & Digital Interrupt(PA8)
40.1	465	)))\|(% style="width:100px" %)Weight
26.2	466
12.1	467	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220820120036-2.png?width=1003&height=469&rev=1.1\|\|alt="image-20220820120036-2.png" height="469" width="1003"]]
	468
	469
13.1	470	==== 2.3.2.6 MOD~=6 (Counting Mode) ====
	471
43.45	472
12.1	473	In this mode, the device will work in counting mode. It counts the interrupt on the interrupt pins and sends the count on TDC time.
	474
	475	Connection is as below. The PIR sensor is a count sensor, it will generate interrupt when people come close or go away. User can replace the PIR sensor with other counting sensors.
	476
26.2	477	[[image:image-20230512181814-9.png\|\|height="543" width="697"]]
12.1	478
43.53	479
43.45	480	(% style="color:red" %)Note: LoRaWAN wireless transmission will infect the PIR sensor. Which cause the counting value increase +1 for every uplink. User can change PIR sensor or put sensor away of the SN50_v3 to avoid this happen.
12.1	481
43.38	482	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
43.57	483	\|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)Size(bytes)\|=(% style="width: 40px;background-color:#D9E2F3;color:#0070C0" %)2\|=(% style="width: 180px;background-color:#D9E2F3;color:#0070C0" %)2\|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)2\|=(% style="width: 100px;background-color:#D9E2F3;color:#0070C0" %)1\|=(% style="width: 80px;background-color:#D9E2F3;color:#0070C0" %)4
45.4	484	\|Value\|BAT\|(% style="width:256px" %)(((
43.31	485	Temperature(DS18B20)(PC13)
36.1	486	)))\|(% style="width:108px" %)(((
43.31	487	ADC(PA4)
36.1	488	)))\|(% style="width:126px" %)(((
43.31	489	Digital in(PB15)
36.1	490	)))\|(% style="width:145px" %)(((
43.31	491	Count(PA8)
36.1	492	)))
	493
12.1	494	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656378441509-171.png?rev=1.1\|\|alt="1656378441509-171.png"]]
	495
	496
13.1	497	==== 2.3.2.7 MOD~=7 (Three interrupt contact modes) ====
	498
43.45	499
43.38	500	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
43.33	501	\|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
12.1	502	Size(bytes)
43.34	503	)))\|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)2\|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)2\|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)2\|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)1\|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)1\|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)1\|=(% style="width: 40px;background-color:#D9E2F3;color:#0070C0" %)2
45.4	504	\|Value\|BAT\|(% style="width:188px" %)(((
36.1	505	Temperature(DS18B20)
	506	(PC13)
40.1	507	)))\|(% style="width:83px" %)(((
43.35	508	ADC(PA5)
40.1	509	)))\|(% style="width:184px" %)(((
36.1	510	Digital Interrupt1(PA8)
40.1	511	)))\|(% style="width:186px" %)Digital Interrupt2(PA4)\|(% style="width:197px" %)Digital Interrupt3(PB15)\|(% style="width:100px" %)Reserved
36.1	512
	513	[[image:image-20230513111203-7.png\|\|height="324" width="975"]]
	514
43.45	515
13.1	516	==== 2.3.2.8 MOD~=8 （3ADC+1DS18B20） ====
	517
43.45	518
43.38	519	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
43.35	520	\|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
12.1	521	Size(bytes)
43.55	522	)))\|=(% style="width: 30px;background-color:#D9E2F3;color:#0070C0" %)2\|=(% style="width: 110px;background-color:#D9E2F3;color:#0070C0" %)2\|=(% style="width: 70px;background-color:#D9E2F3;color:#0070C0" %)2\|=(% style="width: 120px;background-color:#D9E2F3;color:#0070C0" %)1\|=(% style="width: 70px;background-color:#D9E2F3;color:#0070C0" %)2\|=(% style="width: 70px;background-color:#D9E2F3;color:#0070C0" %)2
45.4	523	\|Value\|BAT\|(% style="width:207px" %)(((
36.1	524	Temperature(DS18B20)
	525	(PC13)
	526	)))\|(% style="width:94px" %)(((
43.36	527	ADC1(PA4)
36.1	528	)))\|(% style="width:198px" %)(((
	529	Digital Interrupt(PB15)
	530	)))\|(% style="width:84px" %)(((
43.36	531	ADC2(PA5)
40.1	532	)))\|(% style="width:82px" %)(((
43.36	533	ADC3(PA8)
12.1	534	)))
	535
36.1	536	[[image:image-20230513111231-8.png\|\|height="335" width="900"]]
12.1	537
	538
13.1	539	==== 2.3.2.9 MOD~=9 (3DS18B20+ two Interrupt count mode) ====
	540
43.45	541
43.38	542	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:520px" %)
	543	\|=(% style="width: 50px;background-color:#D9E2F3;color:#0070C0" %)(((
12.1	544	Size(bytes)
43.56	545	)))\|=(% style="width: 20px;background-color:#D9E2F3;color:#0070C0" %)2\|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)2\|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)2\|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)1\|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)2\|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)4\|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)4
45.4	546	\|Value\|BAT\|(((
43.58	547	Temperature
	548	(DS18B20)(PC13)
12.1	549	)))\|(((
43.58	550	Temperature2
	551	(DS18B20)(PB9)
12.1	552	)))\|(((
36.1	553	Digital Interrupt
	554	(PB15)
	555	)))\|(% style="width:193px" %)(((
43.58	556	Temperature3
	557	(DS18B20)(PB8)
36.1	558	)))\|(% style="width:78px" %)(((
43.39	559	Count1(PA8)
36.1	560	)))\|(% style="width:78px" %)(((
43.39	561	Count2(PA4)
12.1	562	)))
	563
36.1	564	[[image:image-20230513111255-9.png\|\|height="341" width="899"]]
12.1	565
43.40	566	(% style="color:blue" %)The newly added AT command is issued correspondingly:
12.1	567
43.44	568	(% style="color:#037691" %) AT+INTMOD1 PA8(%%) pin： Corresponding downlink: (% style="color:#037691" %)06 00 00 xx
12.1	569
43.44	570	(% style="color:#037691" %) AT+INTMOD2 PA4(%%) pin： Corresponding downlink: (% style="color:#037691" %)06 00 01 xx
12.1	571
43.44	572	(% style="color:#037691" %) AT+INTMOD3 PB15(%%) pin： Corresponding downlink: (% style="color:#037691" %) 06 00 02 xx
12.1	573
	574
43.41	575	(% style="color:blue" %)AT+SETCNT=aa,bb
	576
36.1	577	When AA is 1, set the count of PA8 pin to BB Corresponding downlink：09 01 bb bb bb bb
12.1	578
36.1	579	When AA is 2, set the count of PA4 pin to BB Corresponding downlink：09 02 bb bb bb bb
12.1	580
	581
65.1	582	==== 2.3.2.10 MOD~=10 (PWM input capture and output mode，Since firmware v1.2) ====
	583
	584	In this mode, the uplink can perform PWM input capture, and the downlink can perform PWM output.
	585
69.1	586	[[It should be noted when using PWM mode.>>http://8.211.40.43/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SN50v3-LB/#H2.3.3.12A0PWMMOD]]
65.1	587
69.1	588
65.1	589	===== 2.3.2.10.a Uplink, PWM input capture =====
	590
	591	[[image:image-20230817172209-2.png\|\|height="439" width="683"]]
	592
	593	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:690px" %)
	594	\|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)Size(bytes)\|(% style="background-color:#d9e2f3; color:#0070c0; width:20px" %)2\|(% style="background-color:#d9e2f3; color:#0070c0; width:100px" %)2\|(% style="background-color:#d9e2f3; color:#0070c0; width:50px" %)2\|(% style="background-color:#d9e2f3; color:#0070c0; width:135px" %)1\|(% style="background-color:#d9e2f3; color:#0070c0; width:70px" %)2\|(% style="background-color:#d9e2f3; color:#0070c0; width:89px" %)2
	595	\|Value\|Bat\|(% style="width:191px" %)(((
	596	Temperature(DS18B20)(PC13)
	597	)))\|(% style="width:78px" %)(((
	598	ADC(PA4)
	599	)))\|(% style="width:135px" %)(((
	600	PWM_Setting
	601
	602	&Digital Interrupt(PA8)
	603	)))\|(% style="width:70px" %)(((
	604	Pulse period
	605	)))\|(% style="width:89px" %)(((
	606	Duration of high level
	607	)))
	608
	609	[[image:image-20230817170702-1.png\|\|height="161" width="1044"]]
	610
	611
	612	(% style="color:blue" %)AT+PWMSET=AA（Default is 0） ==> Corresponding downlink: 0B AA
	613
69.1	614	When AA is 0, the unit of PWM capture time is microsecond. The capture frequency range is between 20HZ and 100000HZ.
65.1	615
69.1	616	When AA is 1, the unit of PWM capture time is millisecond. The capture frequency range is between 5HZ and 250HZ.
65.1	617
	618
	619	===== 2.3.2.10.b Downlink, PWM output =====
	620
	621	[[image:image-20230817173800-3.png\|\|height="412" width="685"]]
	622
	623	Downlink: (% style="color:#037691" %)0B xx xx xx yy zz zz
	624
	625	xx xx xx is the output frequency, the unit is HZ.
	626
	627	yy is the duty cycle of the output, the unit is %.
	628
	629	zz zz is the time delay of the output, the unit is ms.
	630
	631
	632	For example, send a downlink command: 0B 00 61 A8 32 13 88, the frequency is 25KHZ, the duty cycle is 50, and the output time is 5 seconds.
	633
	634	The oscilloscope displays as follows:
	635
	636	[[image:image-20230817173858-5.png\|\|height="694" width="921"]]
	637
	638
14.1	639	=== 2.3.3 Decode payload ===
	640
43.45	641
12.1	642	While using TTN V3 network, you can add the payload format to decode the payload.
	643
	644	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656378466788-734.png?rev=1.1\|\|alt="1656378466788-734.png"]]
	645
	646	The payload decoder function for TTN V3 are here:
	647
44.2	648	SN50v3-LB TTN V3 Payload Decoder: [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>url:https://github.com/dragino/dragino-end-node-decoder]]
12.1	649
	650
14.1	651	==== 2.3.3.1 Battery Info ====
2.1	652
43.45	653
44.2	654	Check the battery voltage for SN50v3-LB.
2.1	655
	656	Ex1: 0x0B45 = 2885mV
	657
	658	Ex2: 0x0B49 = 2889mV
	659
	660
14.1	661	==== 2.3.3.2 Temperature (DS18B20) ====
2.1	662
43.45	663
42.1	664	If there is a DS18B20 connected to PC13 pin. The temperature will be uploaded in the payload.
2.1	665
43.45	666	More DS18B20 can check the [[3 DS18B20 mode>>\|\|anchor="H2.3.2.4MOD3D4283xDS18B2029"]]
14.1	667
43.41	668	(% style="color:blue" %)Connection:
14.1	669
26.2	670	[[image:image-20230512180718-8.png\|\|height="538" width="647"]]
14.1	671
43.46	672
43.41	673	(% style="color:blue" %)Example:
2.1	674
	675	If payload is: 0105H: (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
	676
	677	If payload is: FF3FH : (FF3F & 8000 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
	678
	679	（FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
	680
	681
14.1	682	==== 2.3.3.3 Digital Input ====
2.1	683
43.46	684
26.2	685	The digital input for pin PB15,
2.1	686
26.2	687	* When PB15 is high, the bit 1 of payload byte 6 is 1.
	688	* When PB15 is low, the bit 1 of payload byte 6 is 0.
2.1	689
26.2	690	(% class="wikigeneratedid" id="H2.3.3.4A0AnalogueDigitalConverter28ADC29" %)
	691	(((
36.1	692	When the digital interrupt pin is set to AT+INTMODx=0, this pin is used as a digital input pin.
	693
43.46	694	(% style="color:red" %)Note: The maximum voltage input supports 3.6V.
	695
	696
26.2	697	)))
	698
14.1	699	==== 2.3.3.4 Analogue Digital Converter (ADC) ====
2.1	700
43.46	701
53.1	702	The measuring range of the ADC is only about 0.1V to 1.1V The voltage resolution is about 0.24mv.
2.1	703
53.1	704	When the measured output voltage of the sensor is not within the range of 0.1V and 1.1V, the output voltage terminal of the sensor shall be divided The example in the following figure is to reduce the output voltage of the sensor by three times If it is necessary to reduce more times, calculate according to the formula in the figure and connect the corresponding resistance in series.
14.1	705
26.2	706	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220628150112-1.png?width=285&height=241&rev=1.1\|\|alt="image-20220628150112-1.png" height="241" width="285"]]
14.1	707
44.2	708
43.46	709	(% style="color:red" %)Note: If the ADC type sensor needs to be powered by SN50_v3, it is recommended to use +5V to control its switch.Only sensors with low power consumption can be powered with VDD.
14.1	710
43.1	711
59.1	712	The position of PA5 on the hardware after LSN50 v3.3 is changed to the position shown in the figure below, and the collected voltage becomes one-sixth of the original.
	713
	714	[[image:image-20230811113449-1.png\|\|height="370" width="608"]]
	715
14.1	716	==== 2.3.3.5 Digital Interrupt ====
	717
43.46	718
44.2	719	Digital Interrupt refers to pin PA8, and there are different trigger methods. When there is a trigger, the SN50v3-LB will send a packet to the server.
14.1	720
43.44	721	(% style="color:blue" %) Interrupt connection method:
14.1	722
36.1	723	[[image:image-20230513105351-5.png\|\|height="147" width="485"]]
14.1	724
43.46	725
43.8	726	(% style="color:blue" %)Example to use with door sensor :
14.1	727
	728	The door sensor is shown at right. It is a two wire magnetic contact switch used for detecting the open/close status of doors or windows.
	729
	730	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379210849-860.png?rev=1.1\|\|alt="1656379210849-860.png"]]
	731
44.2	732	When the two pieces are close to each other, the 2 wire output will be short or open (depending on the type), while if the two pieces are away from each other, the 2 wire output will be the opposite status. So we can use SN50v3-LB interrupt interface to detect the status for the door or window.
14.1	733
	734
43.46	735	(% style="color:blue" %)Below is the installation example:
	736
44.2	737	Fix one piece of the magnetic sensor to the door and connect the two pins to SN50v3-LB as follows:
14.1	738
	739	* (((
44.2	740	One pin to SN50v3-LB's PA8 pin
14.1	741	)))
	742	* (((
44.2	743	The other pin to SN50v3-LB's VDD pin
14.1	744	)))
	745
36.1	746	Install the other piece to the door. Find a place where the two pieces will be close to each other when the door is closed. For this particular magnetic sensor, when the door is closed, the output will be short, and PA8 will be at the VCC voltage.
14.1	747
43.46	748	Door sensors have two types: (% style="color:blue" %) NC (Normal close)(%%) and (% style="color:blue" %)NO (normal open)(%%). The connection for both type sensors are the same. But the decoding for payload are reverse, user need to modify this in the IoT Server decoder.
14.1	749
36.1	750	When door sensor is shorted, there will extra power consumption in the circuit, the extra current is 3v3/R14 = 3v3/1Mohm = 3uA which can be ignored.
14.1	751
	752	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379283019-229.png?rev=1.1\|\|alt="1656379283019-229.png"]]
	753
	754	The above photos shows the two parts of the magnetic switch fitted to a door.
	755
	756	The software by default uses the falling edge on the signal line as an interrupt. We need to modify it to accept both the rising edge (0v ~-~-> VCC , door close) and the falling edge (VCC ~-~-> 0v , door open) as the interrupt.
	757
	758	The command is:
	759
44.2	760	(% style="color:blue" %)AT+INTMOD1=1 (%%) ~/~/ (more info about INMOD please refer [[AT Command Manual>>url:http://www.dragino.com/downloads/index.php?dir=LSN50-LoRaST/&file=DRAGINO_LSN50_AT_Commands_v1.5.1.pdf]]. )
14.1	761
	762	Below shows some screen captures in TTN V3:
	763
	764	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379339508-835.png?rev=1.1\|\|alt="1656379339508-835.png"]]
	765
43.47	766
44.4	767	In MOD=1, user can use byte 6 to see the status for door open or close. TTN V3 decoder is as below:
14.1	768
	769	door= (bytes[6] & 0x80)? "CLOSE":"OPEN";
	770
	771
26.2	772	==== 2.3.3.6 I2C Interface (SHT20 & SHT31) ====
14.1	773
43.47	774
26.2	775	The SDA and SCK are I2C interface lines. You can use these to connect to an I2C device and get the sensor data.
14.1	776
40.1	777	We have made an example to show how to use the I2C interface to connect to the SHT20/ SHT31 Temperature and Humidity Sensor.
14.1	778
44.2	779	(% style="color:red" %)Notice: Different I2C sensors have different I2C commands set and initiate process, if user want to use other I2C sensors, User need to re-write the source code to support those sensors. SHT20/ SHT31 code in SN50v3-LB will be a good reference.
14.1	780
44.2	781
14.1	782	Below is the connection to SHT20/ SHT31. The connection is as below:
	783
52.1	784	[[image:image-20230610170152-2.png\|\|height="501" width="846"]]
36.1	785
44.4	786
14.1	787	The device will be able to get the I2C sensor data now and upload to IoT Server.
	788
	789	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/1656379664142-345.png?rev=1.1\|\|alt="1656379664142-345.png"]]
	790
	791	Convert the read byte to decimal and divide it by ten.
	792
2.1	793	Example:
	794
14.1	795	Temperature: Read:0116(H) = 278(D) Value: 278 /10=27.8℃;
2.1	796
14.1	797	Humidity: Read:0248(H)=584(D) Value: 584 / 10=58.4, So 58.4%
2.1	798
14.1	799	If you want to use other I2C device, please refer the SHT20 part source code as reference.
2.1	800
	801
14.1	802	==== 2.3.3.7 Distance Reading ====
2.1	803
43.48	804
43.42	805	Refer [[Ultrasonic Sensor section>>\|\|anchor="H2.3.3.8UltrasonicSensor"]].
14.1	806
	807
	808	==== 2.3.3.8 Ultrasonic Sensor ====
	809
43.48	810
26.2	811	This Fundamental Principles of this sensor can be found at this link: [[https:~~/~~/wiki.dfrobot.com/Weather_-_proof_Ultrasonic_Sensor_with_Separate_Probe_SKU~~_~~__SEN0208>>url:https://wiki.dfrobot.com/Weather_-_proof_Ultrasonic_Sensor_with_Separate_Probe_SKU___SEN0208]]
14.1	812
44.2	813	The SN50v3-LB detects the pulse width of the sensor and converts it to mm output. The accuracy will be within 1 centimeter. The usable range (the distance between the ultrasonic probe and the measured object) is between 24cm and 600cm.
14.1	814
43.44	815	The working principle of this sensor is similar to the (% style="color:blue" %)HC-SR04(%%) ultrasonic sensor.
36.1	816
14.1	817	The picture below shows the connection:
	818
36.1	819	[[image:image-20230512173903-6.png\|\|height="596" width="715"]]
14.1	820
43.50	821
44.2	822	Connect to the SN50v3-LB and run (% style="color:blue" %)AT+MOD=2(%%) to switch to ultrasonic mode (ULT).
14.1	823
	824	The ultrasonic sensor uses the 8^^th^^ and 9^^th^^ byte for the measurement value.
	825
	826	Example:
	827
	828	Distance: Read: 0C2D(Hex) = 3117(D) Value: 3117 mm=311.7 cm
	829
	830
	831	==== 2.3.3.9 Battery Output - BAT pin ====
	832
43.50	833
44.4	834	The BAT pin of SN50v3-LB is connected to the Battery directly. If users want to use BAT pin to power an external sensor. User need to make sure the external sensor is of low power consumption. Because the BAT pin is always open. If the external sensor is of high power consumption. the battery of SN50v3-LB will run out very soon.
14.1	835
	836
	837	==== 2.3.3.10 +5V Output ====
	838
43.50	839
44.2	840	SN50v3-LB will enable +5V output before all sampling and disable the +5v after all sampling.
14.1	841
	842	The 5V output time can be controlled by AT Command.
	843
43.9	844	(% style="color:blue" %)AT+5VT=1000
14.1	845
	846	Means set 5V valid time to have 1000ms. So the real 5V output will actually have 1000ms + sampling time for other sensors.
	847
44.4	848	By default the AT+5VT=500. If the external sensor which require 5v and require more time to get stable state, user can use this command to increase the power ON duration for this sensor.
14.1	849
	850
	851	==== 2.3.3.11 BH1750 Illumination Sensor ====
	852
43.50	853
14.1	854	MOD=1 support this sensor. The sensor value is in the 8^^th^^ and 9^^th^^ bytes.
	855
40.1	856	[[image:image-20230512172447-4.png\|\|height="416" width="712"]]
14.1	857
43.51	858
40.1	859	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50%20%26%20LSN50-V2%20-%20LoRaWAN%20Sensor%20Node%20User%20Manual/WebHome/image-20220628110012-12.png?rev=1.1\|\|alt="image-20220628110012-12.png" height="361" width="953"]]
14.1	860
	861
65.1	862	==== 2.3.3.12 PWM MOD ====
14.1	863
43.51	864
69.1	865	* (((
	866	The maximum voltage that the SDA pin of SN50v3 can withstand is 3.6V, and it cannot exceed this voltage value, otherwise the chip may be burned.
	867	)))
	868	* (((
	869	If the PWM pin connected to the SDA pin cannot maintain a high level when it is not working, you need to remove the resistor R2 or replace it with a resistor with a larger resistance, otherwise a sleep current of about 360uA will be generated. The position of the resistor is shown in the figure below:
	870	)))
	871
	872	[[image:image-20230817183249-3.png\|\|height="320" width="417"]]
	873
	874	* (((
	875	The signal captured by the input should preferably be processed by hardware filtering and then connected in. The software processing method is to capture four values, discard the first captured value, and then take the middle value of the second, third, and fourth captured values.
	876	)))
	877	* (((
	878	Since the device can only detect a pulse period of 50ms when AT+PWMSET=0 (counting in microseconds), it is necessary to change the value of PWMSET according to the frequency of input capture.
70.1	879
	880
69.1	881	)))
	882
65.1	883	==== 2.3.3.13 Working MOD ====
	884
	885
14.1	886	The working MOD info is contained in the Digital in & Digital Interrupt byte (7^^th^^ Byte).
	887
	888	User can use the 3^^rd^^ ~~ 7^^th^^ bit of this byte to see the working mod:
	889
	890	Case 7^^th^^ Byte >> 2 & 0x1f:
	891
	892	* 0: MOD1
	893	* 1: MOD2
	894	* 2: MOD3
	895	* 3: MOD4
	896	* 4: MOD5
	897	* 5: MOD6
36.1	898	* 6: MOD7
	899	* 7: MOD8
	900	* 8: MOD9
65.1	901	* 9: MOD10
14.1	902
2.1	903	== 2.4 Payload Decoder file ==
	904
	905
	906	In TTN, use can add a custom payload so it shows friendly reading
	907
	908	In the page (% style="color:#037691" %)Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder(%%) to add the decoder from:
	909
40.1	910	[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/SN50_v3-LB>>https://github.com/dragino/dragino-end-node-decoder/tree/main/SN50_v3-LB]]
2.1	911
	912
15.1	913	== 2.5 Frequency Plans ==
2.1	914
	915
15.1	916	The SN50v3-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
2.1	917
	918	[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
	919
	920
16.1	921	= 3. Configure SN50v3-LB =
2.1	922
	923	== 3.1 Configure Methods ==
	924
	925
16.1	926	SN50v3-LB supports below configure method:
2.1	927
	928	* AT Command via Bluetooth Connection (Recommended): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
	929	* AT Command via UART Connection : See [[UART Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
	930	* LoRaWAN Downlink. Instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
	931
	932	== 3.2 General Commands ==
	933
	934
	935	These commands are to configure:
	936
	937	* General system settings like: uplink interval.
	938	* LoRaWAN protocol & radio related command.
	939
	940	They are same for all Dragino Devices which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:
	941
	942	[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
	943
	944
16.1	945	== 3.3 Commands special design for SN50v3-LB ==
2.1	946
	947
44.2	948	These commands only valid for SN50v3-LB, as below:
2.1	949
	950
	951	=== 3.3.1 Set Transmit Interval Time ===
	952
43.51	953
2.1	954	Feature: Change LoRaWAN End Node Transmit Interval.
	955
	956	(% style="color:blue" %)AT Command: AT+TDC
	957
	958	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
52.2	959	\|=(% style="width: 156px;background-color:#D9E2F3;color:#0070C0" %)Command Example\|=(% style="width: 137px;background-color:#D9E2F3;color:#0070C0" %)Function\|=(% style="background-color:#D9E2F3;color:#0070C0" %)Response
2.1	960	\|(% style="width:156px" %)AT+TDC=?\|(% style="width:137px" %)Show current transmit Interval\|(((
	961	30000
	962	OK
	963	the interval is 30000ms = 30s
	964	)))
	965	\|(% style="width:156px" %)AT+TDC=60000\|(% style="width:137px" %)Set Transmit Interval\|(((
	966	OK
	967	Set transmit interval to 60000ms = 60 seconds
	968	)))
	969
	970	(% style="color:blue" %)Downlink Command: 0x01
	971
	972	Format: Command Code (0x01) followed by 3 bytes time value.
	973
	974	If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
	975
	976	* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
	977	* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
	978
	979	=== 3.3.2 Get Device Status ===
	980
43.52	981
40.1	982	Send a LoRaWAN downlink to ask the device to send its status.
2.1	983
44.4	984	(% style="color:blue" %)Downlink Payload: 0x26 01
2.1	985
44.4	986	Sensor will upload Device Status via FPORT=5. See payload section for detail.
2.1	987
	988
36.1	989	=== 3.3.3 Set Interrupt Mode ===
2.1	990
43.52	991
2.1	992	Feature, Set Interrupt mode for GPIO_EXIT.
	993
36.1	994	(% style="color:blue" %)AT Command: AT+INTMOD1，AT+INTMOD2，AT+INTMOD3
2.1	995
	996	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
52.3	997	\|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)Command Example\|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)Function\|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)Response
36.1	998	\|(% style="width:154px" %)AT+INTMOD1=?\|(% style="width:196px" %)Show current interrupt mode\|(% style="width:157px" %)(((
2.1	999	0
	1000	OK
	1001	the mode is 0 =Disable Interrupt
	1002	)))
36.1	1003	\|(% style="width:154px" %)AT+INTMOD1=2\|(% style="width:196px" %)(((
2.1	1004	Set Transmit Interval
	1005	0. (Disable Interrupt),
	1006	~1. (Trigger by rising and falling edge)
	1007	2. (Trigger by falling edge)
	1008	3. (Trigger by rising edge)
	1009	)))\|(% style="width:157px" %)OK
36.1	1010	\|(% style="width:154px" %)AT+INTMOD2=3\|(% style="width:196px" %)(((
	1011	Set Transmit Interval
	1012	trigger by rising edge.
	1013	)))\|(% style="width:157px" %)OK
	1014	\|(% style="width:154px" %)AT+INTMOD3=0\|(% style="width:196px" %)Disable Interrupt\|(% style="width:157px" %)OK
	1015
2.1	1016	(% style="color:blue" %)Downlink Command: 0x06
	1017
	1018	Format: Command Code (0x06) followed by 3 bytes.
	1019
	1020	This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
	1021
36.1	1022	* Example 1: Downlink Payload: 06000000 ~-~--> AT+INTMOD1=0
	1023	* Example 2: Downlink Payload: 06000003 ~-~--> AT+INTMOD1=3
	1024	* Example 3: Downlink Payload: 06000102 ~-~--> AT+INTMOD2=2
	1025	* Example 4: Downlink Payload: 06000201 ~-~--> AT+INTMOD3=1
2.1	1026
36.1	1027	=== 3.3.4 Set Power Output Duration ===
	1028
43.52	1029
36.1	1030	Control the output duration 5V . Before each sampling, device will
	1031
	1032	~1. first enable the power output to external sensor,
	1033
	1034	2. keep it on as per duration, read sensor value and construct uplink payload
	1035
	1036	3. final, close the power output.
	1037
	1038	(% style="color:blue" %)AT Command: AT+5VT
	1039
	1040	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
52.3	1041	\|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)Command Example\|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)Function\|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)Response
36.1	1042	\|(% style="width:154px" %)AT+5VT=?\|(% style="width:196px" %)Show 5V open time.\|(% style="width:157px" %)(((
	1043	500(default)
	1044	OK
	1045	)))
	1046	\|(% style="width:154px" %)AT+5VT=1000\|(% style="width:196px" %)(((
	1047	Close after a delay of 1000 milliseconds.
	1048	)))\|(% style="width:157px" %)OK
	1049
	1050	(% style="color:blue" %)Downlink Command: 0x07
	1051
	1052	Format: Command Code (0x07) followed by 2 bytes.
	1053
	1054	The first and second bytes are the time to turn on.
	1055
40.1	1056	* Example 1: Downlink Payload: 070000 ~-~--> AT+5VT=0
	1057	* Example 2: Downlink Payload: 0701F4 ~-~--> AT+5VT=500
36.1	1058
	1059	=== 3.3.5 Set Weighing parameters ===
	1060
43.52	1061
37.1	1062	Feature: Working mode 5 is effective, weight initialization and weight factor setting of HX711.
36.1	1063
	1064	(% style="color:blue" %)AT Command: AT+WEIGRE,AT+WEIGAP
	1065
	1066	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
52.3	1067	\|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)Command Example\|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)Function\|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)Response
37.1	1068	\|(% style="width:154px" %)AT+WEIGRE\|(% style="width:196px" %)Weight is initialized to 0.\|(% style="width:157px" %)OK
	1069	\|(% style="width:154px" %)AT+WEIGAP=？\|(% style="width:196px" %)400.0\|(% style="width:157px" %)OK(default)
	1070	\|(% style="width:154px" %)AT+WEIGAP=400.3\|(% style="width:196px" %)Set the factor to 400.3.\|(% style="width:157px" %)OK
36.1	1071
	1072	(% style="color:blue" %)Downlink Command: 0x08
	1073
37.1	1074	Format: Command Code (0x08) followed by 2 bytes or 4 bytes.
36.1	1075
37.1	1076	Use AT+WEIGRE when the first byte is 1, only 1 byte. When it is 2, use AT+WEIGAP, there are 3 bytes.
36.1	1077
37.1	1078	The second and third bytes are multiplied by 10 times to be the AT+WEIGAP value.
36.1	1079
37.1	1080	* Example 1: Downlink Payload: 0801 ~-~--> AT+WEIGRE
	1081	* Example 2: Downlink Payload: 08020FA3 ~-~--> AT+WEIGAP=400.3
	1082	* Example 3: Downlink Payload: 08020FA0 ~-~--> AT+WEIGAP=400.0
	1083
36.1	1084	=== 3.3.6 Set Digital pulse count value ===
	1085
43.52	1086
36.1	1087	Feature: Set the pulse count value.
	1088
37.1	1089	Count 1 is PA8 pin of mode 6 and mode 9. Count 2 is PA4 pin of mode 9.
	1090
36.1	1091	(% style="color:blue" %)AT Command: AT+SETCNT
	1092
	1093	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
52.3	1094	\|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)Command Example\|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)Function\|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)Response
36.1	1095	\|(% style="width:154px" %)AT+SETCNT=1,100\|(% style="width:196px" %)Initialize the count value 1 to 100.\|(% style="width:157px" %)OK
	1096	\|(% style="width:154px" %)AT+SETCNT=2,0\|(% style="width:196px" %)Initialize the count value 2 to 0.\|(% style="width:157px" %)OK
	1097
	1098	(% style="color:blue" %)Downlink Command: 0x09
	1099
	1100	Format: Command Code (0x09) followed by 5 bytes.
	1101
	1102	The first byte is to select which count value to initialize, and the next four bytes are the count value to be initialized.
	1103
	1104	* Example 1: Downlink Payload: 090100000000 ~-~--> AT+SETCNT=1,0
37.1	1105	* Example 2: Downlink Payload: 0902000003E8 ~-~--> AT+SETCNT=2,1000
36.1	1106
	1107	=== 3.3.7 Set Workmode ===
	1108
43.52	1109
37.1	1110	Feature: Switch working mode.
36.1	1111
	1112	(% style="color:blue" %)AT Command: AT+MOD
	1113
	1114	(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
52.3	1115	\|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)Command Example\|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)Function\|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)Response
36.1	1116	\|(% style="width:154px" %)AT+MOD=?\|(% style="width:196px" %)Get the current working mode.\|(% style="width:157px" %)(((
	1117	OK
	1118	)))
	1119	\|(% style="width:154px" %)AT+MOD=4\|(% style="width:196px" %)Set the working mode to 3DS18B20s.\|(% style="width:157px" %)(((
	1120	OK
	1121	Attention:Take effect after ATZ
	1122	)))
	1123
	1124	(% style="color:blue" %)Downlink Command: 0x0A
	1125
	1126	Format: Command Code (0x0A) followed by 1 bytes.
	1127
	1128	* Example 1: Downlink Payload: 0A01 ~-~--> AT+MOD=1
	1129	* Example 2: Downlink Payload: 0A04 ~-~--> AT+MOD=4
	1130
2.1	1131	= 4. Battery & Power Consumption =
	1132
	1133
11.1	1134	SN50v3-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
2.1	1135
	1136	[[Battery Info & Power Consumption Analyze>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
	1137
	1138
	1139	= 5. OTA Firmware update =
	1140
	1141
	1142	(% class="wikigeneratedid" %)
44.4	1143	User can change firmware SN50v3-LB to:
2.1	1144
	1145	* Change Frequency band/ region.
	1146	* Update with new features.
	1147	* Fix bugs.
	1148
52.2	1149	Firmware and changelog can be downloaded from : [[Firmware download link>>https://www.dropbox.com/sh/4rov7bcp6u28exp/AACt-wAySd4si5AXi8DBmvSca?dl=0]]
2.1	1150
44.4	1151	Methods to Update Firmware:
2.1	1152
53.3	1153	* (Recommanded way) OTA firmware update via wireless: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
	1154	* Update through UART TTL interface: [[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]].
2.1	1155
	1156	= 6. FAQ =
	1157
17.1	1158	== 6.1 Where can i find source code of SN50v3-LB? ==
2.1	1159
43.52	1160
17.1	1161	* [[Hardware Source Files>>https://github.com/dragino/Lora/tree/master/LSN50/v3.0]].
	1162	* [[Software Source Code & Compile instruction>>https://github.com/dragino/SN50v3]].
2.1	1163
55.2	1164	== 6.2 How to generate PWM Output in SN50v3-LB? ==
	1165
	1166
55.1	1167	See this document: [[Generate PWM Output on SN50v3>>https://www.dropbox.com/scl/fi/r3trcet2knujg40w0mgyn/Generate-PWM-Output-on-SN50v3.pdf?rlkey=rxsgmrhhrv62iiiwjq9sv10bn&dl=0]].
	1168
	1169
57.1	1170	== 6.3 How to put several sensors to a SN50v3-LB? ==
	1171
57.2	1172
57.1	1173	When we want to put several sensors to A SN50v3-LB, the waterproof at the grand connector will become an issue. User can try to exchange the grand connector to below type.
	1174
	1175	[[Reference Supplier>>https://www.yscableglands.com/cable-glands/nylon-cable-glands/cable-gland-rubber-seal.html]].
	1176
	1177	[[image:image-20230810121434-1.png\|\|height="242" width="656"]]
	1178
	1179
2.1	1180	= 7. Order Info =
	1181
	1182
10.1	1183	Part Number: (% style="color:blue" %)SN50v3-LB-XX-YY
2.1	1184
	1185	(% style="color:red" %)XX(%%): The default frequency band
11.1	1186
2.1	1187	* (% style="color:red" %)AS923(%%): LoRaWAN AS923 band
	1188	* (% style="color:red" %)AU915(%%): LoRaWAN AU915 band
	1189	* (% style="color:red" %)EU433(%%): LoRaWAN EU433 band
	1190	* (% style="color:red" %)EU868(%%): LoRaWAN EU868 band
	1191	* (% style="color:red" %)KR920(%%): LoRaWAN KR920 band
	1192	* (% style="color:red" %)US915(%%): LoRaWAN US915 band
	1193	* (% style="color:red" %)IN865(%%): LoRaWAN IN865 band
	1194	* (% style="color:red" %)CN470(%%): LoRaWAN CN470 band
	1195
10.1	1196	(% style="color:red" %)YY: (%%)Hole Option
2.1	1197
10.1	1198	* (% style="color:red" %)12(%%): With M12 waterproof cable hole
	1199	* (% style="color:red" %)16(%%): With M16 waterproof cable hole
	1200	* (% style="color:red" %)20(%%): With M20 waterproof cable hole
	1201	* (% style="color:red" %)NH(%%): No Hole
	1202
2.1	1203	= 8. Packing Info =
	1204
43.52	1205
2.1	1206	(% style="color:#037691" %)Package Includes:
	1207
10.1	1208	* SN50v3-LB LoRaWAN Generic Node
2.1	1209
	1210	(% style="color:#037691" %)Dimension and weight:
	1211
	1212	* Device Size: cm
	1213	* Device Weight: g
	1214	* Package Size / pcs : cm
	1215	* Weight / pcs : g
	1216
	1217	= 9. Support =
	1218
	1219
	1220	* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
43.10	1221
41.4	1222	* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.cc>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.cc]]

Wiki source code of SN50v3-LB LoRaWAN Sensor Node User Manual

Applications