SDI-12-LB -- SDI-12 to LoRaWAN Converter User Manual

SDI-12 (Serial Digital Interface at 1200 baud) is an asynchronous [[serial communications>>url:https://en.wikipedia.org/wiki/Serial_communication]] protocol for intelligent sensors that monitor environment data. SDI-12 protocol is widely used in Agriculture sensor and Weather Station sensors.

27

28

**SDI-12-LB** has SDI-12 interface and support 12v output to power external SDI-12 sensor. It can get the environment data from SDI-12 sensor and sends out the data via LoRaWAN wireless protocol.

29

30

The LoRa wireless technology used in **SDI-12-LB** allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.

31

32

**SDI-12-LB** is powered by **8500mAh Li-SOCI2 battery**, it is designed for long term use up to 5 years.

33

34

Each **SDI-12-LB** is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.

35

36

37

[[image:image-20230201084414-1.png||height="464" width="1108"]]

== 1.2 Features ==

* LoRaWAN 1.0.3 Class A

48

* Ultra-low power consumption

49

* Controllable 5v and 12v output to power external sensor

50

* SDI-12 Protocol to connect to SDI-12 Sensor

51

* Monitor Battery Level

52

* Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865

53

* Support Bluetooth v5.1 and LoRaWAN remote configure.

54

* Support wireless OTA update firmware

55

* Uplink on periodically

56

* Downlink to change configure

57

* 8500mAh Battery for long term use

58

59

== 1.3 Specification ==

60

61

62

**Micro Controller:**

* MCU: 48Mhz ARM

* Flash: 256KB

* RAM: 64KB

**Common DC Characteristics:**

69

70

* Supply Voltage: 2.5v ~~ 3.6v

71

* Operating Temperature: -40 ~~ 85°C

**LoRa Spec:**

* Frequency Range, Band 1 (HF): 862 ~~ 1020 Mhz

76

* Max +22 dBm constant RF output vs.

77

* RX sensitivity: down to -139 dBm.

78

* Excellent blocking immunity

79

80

**Current Input Measuring :**

* Range: 0 ~~ 20mA

* Accuracy: 0.02mA

* Resolution: 0.001mA

85

86

**Voltage Input Measuring:**

* Range: 0 ~~ 30v

* Accuracy: 0.02v

* Resolution: 0.001v

**Battery:**

* Li/SOCI2 un-chargeable battery

95

* Capacity: 8500mAh

96

* Self-Discharge: <1% / Year @ 25°C

97

* Max continuously current: 130mA

98

* Max boost current: 2A, 1 second

99

100

**Power Consumption**

101

102

* Sleep Mode: 5uA @ 3.3v

103

* LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm

104

105

== 1.4 Connect to SDI-12 Sensor ==

[[image:1675212538524-889.png]]

110

111

112

== 1.5 Sleep mode and working mode ==

113

114

115

**Deep Sleep Mode: **Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.

116

117

**Working Mode: **In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.

118

119

120

== 1.6 Button & LEDs ==

121

122

123

[[image:1675212633011-651.png]]

(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)

128

|=(% style="width: 167px;" %)**Behavior on ACT**|=(% style="width: 117px;" %)**Function**|=(% style="width: 225px;" %)**Action**

129

|(% style="width:167px" %)Pressing ACT between 1s < time < 3s|(% style="width:117px" %)Send an uplink|(% style="width:225px" %)(((

130

If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.

131

Meanwhile, BLE module will be active and user can connect via BLE to configure device.

132

)))

133

|(% style="width:167px" %)Pressing ACT for more than 3s|(% style="width:117px" %)Active Device|(% style="width:225px" %)(((

134

(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network.

135

(% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.

136

Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device join or not join LoRaWAN network.

137

)))

138

|(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means PS-LB is in Deep Sleep Mode.

139

140

== 1.7 Pin Mapping ==

141

142

143

[[image:1675213198663-754.png]]

144

145

146

== 1.8 BLE connection ==

147

148

149

SDI-12-LB support BLE remote configure.

150

151

BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:

152

153

* Press button to send an uplink

154

* Press button to active device.

155

* Device Power on or reset.

156

157

If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.

== 1.9 Mechanical ==

[[image:image-20230201090139-2.png]]

167

168

[[image:image-20230201090139-3.png]]

169

170

[[image:image-20230201090139-4.png]]

171

172

173

= 2. Configure SDI-12 to connect to LoRaWAN network =

174

175

== 2.1 How it works ==

176

177

178

The SDI-12-LB is configured as **LoRaWAN OTAA Class A** mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and activate the SDI-12-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.

179

180

181

== 2.2 Quick guide to connect to LoRaWAN server (OTAA) ==

182

183

184

Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.

185

186

187

[[image:image-20230201090528-5.png||height="465" width="1111"]]

188

189

190

The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.

191

192

193

**Step 1**: Create a device in TTN with the OTAA keys from SDI-12-LB.

194

195

Each SDI-12-LB is shipped with a sticker with the default device EUI as below:

196

197

198

[[image:image-20230131134744-2.jpeg]]

You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:

205

206

207

**Register the device**

208

209

[[image:1675213652444-622.png]]

210

211

212

**Add APP EUI and DEV EUI**

213

214

215

[[image:1675213661769-223.png]]

216

217

218

**Add APP EUI in the application**

219

220

221

[[image:1675213675852-577.png]]

**Add APP KEY**

[[image:1675213686734-883.png]]

227

228

229

**Step 2**: Activate on SDI-12-LB

230

231

232

Press the button for 5 seconds to activate the SDI-12-LB.

233

234

235

**Green led** will fast blink 5 times, device will enter **OTA mode** for 3 seconds. And then start to JOIN LoRaWAN network. **Green led** will solidly turn on for 5 seconds after joined in network.

236

237

238

[[image:1675213704414-644.png]]

239

240

241

== 2.3 SDI-12 Related Commands ==

242

243

244

User need to configure SDI-12-LB to communicate with SDI-12 sensors otherwise the uplink payload will only include a few bytes.

245

246

247

=== 2.3.1 Basic SDI-12 debug command ===

248

249

250

User can run some basic SDI-12 command to debug the connection to the SDI-12 sensor. These commands can be sent via AT Command or LoRaWAN downlink command.

251

252

If SDI-12 sensor return value after get these commands, //SDI-12-LB// will uplink the return on FPORT=100, otherwise, if there is no response from SDI-12 sensor. //SDI-12-LB// will uplink NULL (0x 4E 55 4C 4C) to server.

253

254

The following is the display information on the serial port and the server.

[[image:image-20230201091027-6.png]]

259

260

261

[[image:image-20230201091027-7.png||height="261" width="1179"]]

262

263

264

==== **al! ~-~- Get SDI-12 sensor Identification** ====

265

266

267

* AT Command: AT+ADDRI=aa

268

* LoRaWAN Downlink(prefix 0xAA00): AA 00 aa

269

270

**Parameter: **aa: ASCII value of SDI-12 sensor address in downlink or HEX value in AT Command)

271

272

**Example : **AT+ADDRI=0 ( Equal to downlink: 0x AA 00 30)

273

274

275

The following is the display information on the serial port and the server.

276

277

278

[[image:image-20230201091257-8.png]]

279

280

281

[[image:image-20230201091257-9.png||height="225" width="1242"]]

282

283

284

==== **aM!,aMC!, aM1!- aM9!, aMC1!- aMC9!** ====

285

286

287

**aM! **: Start Non-Concurrent Measurement

288

289

**aMC! **: Start Non-Concurrent Measurement – Request CRC

290

291

**aM1!- aM9! **: Additional Measurements

292

293

**aMC1!- aMC9!** : Additional Measurements – Request CRC

294

295

296

* AT Command : AT+ADDRM=0,1,0,1

297

* LoRaWAN Downlink(prefix 0xAA01): 0xAA 01 30 01 00 01

298

299

Downlink：AA 01 aa bb cc dd

300

301

**aa**: SDI-12 sensor address.

302

303

**bb**: 0: no CRC, 1: request CRC

304

305

**cc**: 1-9: Additional Measurement, 0: no additional measurement

306

307

**dd**: delay (in second) to send **aD0!** to get return.

308

309

310

The following is the display information on the serial port and the server.

311

312

313

[[image:image-20230201091630-10.png]]

314

315

316

[[image:image-20230201091630-11.png||height="247" width="1165"]]

==== **aC!, aCC!, aC1!- aC9!, aCC1!- aCC9! ** ====

321

322

323

**aC!** : Start Concurrent Measurement

324

325

**aCC!** : Start Concurrent Measurement – Request CRC

326

327

**aC1!- aC9!** : Start Additional Concurrent Measurements

328

329

**aCC1!- aCC9!** : Start Additional Concurrent Measurements – Request CRC

330

331

332

* AT Command : AT+ADDRC=0,1,0,1

333

334

* LoRaWAN Downlink(0xAA02): 0xAA 02 30 01 00 01

335

336

Downlink: AA 02 aa bb cc dd

337

338

**aa**: SDI-12 sensor address.

339

340

**bb**: 0: no CRC, 1: request CRC

341

342

**cc**: 1-9: Additional Measurement, 0: no additional measurement

343

344

**dd**: delay (in second) to send **aD0!** to get return.

345

346

347

The following is the display information on the serial port and the server.

348

349

350

[[image:image-20230201091954-12.png]]

351

352

353

[[image:image-20230201091954-13.png||height="203" width="1117"]]

354

355

356

(% style="display:none" %) (%%)

357

358

==== **aR0!- aR9!, aRC0!- aRC9!** ====

359

360

361

Start Continuous Measurement

362

363

Start Continuous Measurement – Request CRC

364

365

366

* AT Command : AT+ADDRR=0,1,0,1

367

* LoRaWAN Downlink (0xAA 03): 0xAA 03 30 01 00 01

368

369

Downlink: AA 03 aa bb cc dd

370

371

**aa**: SDI-12 sensor address.

372

373

**bb**: 0: no CRC, 1: request CRC

374

375

**cc**: 1-9: Additional Measurement, 0: no additional measurement

376

377

**dd**: delay (in second) to send **aD0!** to get return.

378

379

380

The following is the display information on the serial port and the server.

[[image:image-20230201092208-14.png]]

385

386

387

[[image:image-20230201092208-15.png||height="214" width="1140"]]

388

389

390

=== 2.3.2 Advance SDI-12 Debug command ===

391

392

393

This command can be used to debug all SDI-12 command.

394

395

396

LoRaWAN Downlink: A8 aa xx xx xx xx bb cc

397

398

**aa **: total SDI-12 command length

399

400

**xx **: SDI-12 command

401

402

**bb **: Delay to wait for return

403

404

**cc **: 0: don't uplink return to LoRaWAN, 1: Uplink return to LoRaWAN on FPORT=100

405

406

407

**Example: **AT+CFGDEV =0RC0!,1

408

409

**0RC0! **: SDI-12 Command,

410

411

**1 **: Delay 1 second. ( 0: 810 mini-second)

412

413

Equal Downlink: 0xA8 05 30 52 43 30 21 01 01

414

415

416

The following is the display information on the serial port and the server.

417

418

419

[[image:image-20230201092355-16.png]]

420

421

422

[[image:image-20230201092355-17.png||height="426" width="1135"]]

=== 2.3.3 Convert ASCII to String ===

427

428

429

This command is used to convert between ASCII and String format.

430

431

AT+CONVFORM ( Max length: 80 bytes)

**Example:**

1) AT+CONVFORM=0, string Convert String from String to ASCII

437

438

[[image:1675214845056-885.png]]

439

440

441

2) AT+CONVFORM=1, ASCII Convert ASCII to String.

442

443

[[image:1675214856590-846.png]]

=== 2.3.4 Define periodically SDI-12 commands and uplink. ===

448

449

450

AT+COMMANDx & AT+DATACUTx

451

452

User can define max 15 SDI-12 Commands (AT+COMMAND1 ~~ AT+COMMANDF). On each uplink period (TDC time, default 20 minutes), SDI-12-LB will send these SDI-12 commands and wait for return from SDI-12 sensors. SDI-12-LB will then combine these returns and uplink via LoRaWAN.

* ** AT Command:**

**AT+COMMANDx=var1,var2,var3,var4.**

458

459

**var1**: SDI-12 command , for example: 0RC0!

460

461

**var2**: Wait timeout for return. (unit: second)

462

463

**var3**: Whether to send //addrD0!// to get return after var2 timeout. 0: Don't Send //addrD0! //; 1: Send //addrD0!//.

464

465

**var4**: validation check for return. If return invalid, SDI-12-LB will resend this command. Max 2 retries.

466

467

**0 ** No validation check;

468

469

**1** Check if return chars are printable char(0x20 ~~ 0x7E);

470

471

**2** Check if there is return from SDI-12 sensor

472

473

**3** Check if return pass CRC check ( SDI-12 command var1 must include CRC request);

474

475

476

Each AT+COMMANDx is followed by a **AT+DATACUT** command. AT+DATACUT command is used to take the useful string from the SDI-12 sensor so the final payload will have the minimum length to uplink.

477

478

479

**AT+DATACUTx** : This command defines how to handle the return from AT+COMMANDx, max return length is 100 bytes.

480

481

(% border="1" style="background-color:#f7faff; width:436px" %)

482

|(% style="width:433px" %)(((

483

**AT+DATACUTx=a,b,c**

484

485

**a**: length for the return of AT+COMMAND

486

487

**b**: 1: grab valid value by byte, max 6 bytes. 2: grab valid value by bytes section, max 3 sections.

488

489

**c**: define the position for valid value.

490

)))

491

492

For example, if return from AT+COMMAND1 is “013METER TER12 112T12-00024895” , Below AT+DATACUT1 will get different result to combine payload:

493

494

495

(% border="1" cellspacing="4" style="background-color:#f7faff; width:510px" %)

496

|(% style="width:170px" %)**AT+DATACUT1 value**|(% style="width:338px" %)**Final Result to combine Payload**

497

|(% style="width:170px" %)34,1,1+2+3|(% style="width:338px" %)0D 00 01 30 31 33

498

|(% style="width:170px" %)34,2,1~~8+12~~16|(% style="width:338px" %)0D 00 01 30 31 33 4D 45 54 45 52 54 45 52 31 32

499

|(% style="width:170px" %)34,2,1~~34|(% style="width:338px" %)0D 00 01 30 31 33 4D 45 54 45 52 20 20 20 54 45 52 31 32 20 31 31 32 54 31 32 2D 30 30 30 32 34 38 39 35 0D 0A

500

501

* ** Downlink Payload:**

502

503

**0xAF** downlink command can be used to set AT+COMMANDx or AT+DATACUTx.

504

505

506

**Note : if user use AT+COMMANDx to add a new command, he also need to send AT+DATACUTx downlink.**

507

508

509

Format: ** AF MM NN LL XX XX XX XX YY**

Where:

* **MM **: the AT+COMMAND or AT+DATACUT to be set. Value from 01 ~~ 0F,

514

* **NN **: 1: set the AT+DATACUT value ; 2: set the AT+DATACUT value.

515

* **LL **: The length of AT+COMMAND or AT+DATACUT command

516

* **XX XX XX XX **: AT+COMMAND or AT+DATACUT command

517

* **YY **: If YY=0, RS485-LN will execute the downlink command without uplink; if YY=1, RS485-LN will execute an uplink after got this command.

**Example:**

[[image:image-20230201094129-18.png]]

522

523

524

**Clear SDI12 Command**

525

526

The AT+COMMANDx and AT+DATACUTx settings are stored in special location, user can use below command to clear them.

* ** AT Command:**

**~ AT+CMDEAR=mm,nn** mm: start position of erase ,nn: stop position of erase

532

533

534

Etc. AT+CMDEAR=1,10 means erase AT+COMMAND1/AT+DATACUT1 to AT+COMMAND10/AT+DATACUT10

535

536

537

* ** Downlink Payload:**

538

539

**~ 0x09 aa bb** same as AT+CMDEAR=aa,bb

**command combination**

544

545

Below shows a screen shot how the results combines together to a uplink payload.

546

547

[[image:1675215745275-920.png]]

548

549

550

If user don't want to use DATACUT for some command, he simply want to uplink all returns. AT+ALLDATAMOD can be set to 1.

551

552

**AT+ALLDATAMOD** will simply get all return and don't do CRC check as result for SDI-12 command. AT+DATACUTx command has higher priority, if AT+DATACUTx has been set, AT+ALLDATAMOD will be ignore for this SDI-12 command.

553

554

555

**For example: ** as below photo, AT+ALLDATAMOD=1, but AT+DATACUT1 has been set, AT+DATACUT1 will be still effect the result.

556

557

558

[[image:1675215782925-448.png]]

559

560

561

If AT+ALLDATAMOD=1, **FX,X** will be added in the payload, FX specify which command is used and X specify the length of return. for example in above screen, F1 05 means the return is from AT+COMMAND1 and the return is 5 bytes.

**Compose Uplink**

**AT+DATAUP=0**

Compose the uplink payload with value returns in sequence and send with A SIGNLE UPLINK.

571

572

Final Payload is Battery Info+PAYVER + VALID Value from RETURN1 + Valid Value from RETURN2 + … + RETURNx

573

574

Where PAYVER is defined by AT+PAYVER, below is an example screen shot.

575

576

577

[[image:1675215828102-844.png]]

**AT+DATAUP=1**

Compose the uplink payload with value returns in sequence and send with Multiply UPLINKs.

Final Payload is

__**Battery Info+PAYVER + PAYLOAD COUNT + PAYLOAD# + DATA**__

587

588

1. Battery Info (2 bytes): Battery voltage

589

1. PAYVER (1 byte): Defined by AT+PAYVER

590

1. PAYLOAD COUNT (1 byte): Total how many uplinks of this sampling.

591

1. PAYLOAD# (1 byte): Number of this uplink. (from 0,1,2,3…,to PAYLOAD COUNT)

592

1. DATA: Valid value: max 6 bytes(US915 version here, Notice*!) for each uplink so each uplink <= 11 bytes. For the last uplink, DATA will might less than 6 bytes

593

594

[[image:1675215848113-696.png]]

595

596

597

**Notice: the Max bytes is according to the max support bytes in different Frequency Bands for lowest SF. As below:**

598

599

* For AU915/AS923 bands, if UplinkDwell time=0, max 51 bytes for each uplink ( so 51 -5 = 46 max valid date)

600

* For AU915/AS923 bands, if UplinkDwell time=1, max 11 bytes for each uplink ( so 11 -5 = 6 max valid date).

601

* For US915 band, max 11 bytes for each uplink ( so 11 -5 = 6 max valid date).

602

* For all other bands: max 51 bytes for each uplink ( so 51 -5 = 46 max valid date).

603

604

**~ When AT+DATAUP=1, the maximum number of segments is 15, and the maximum total number of bytes is 1500;**

605

606

**~ When AT+DATAUP=1 and AT+ADR=0, the maximum number of bytes of each payload is determined by the DR value.**

607

608

609

== 2.4 Uplink Payload ==

610

611

612

Uplink payloads have two types:

613

614

* Distance Value: Use FPORT=2

615

* Other control commands: Use other FPORT fields.

616

617

The application server should parse the correct value based on FPORT settings.

618

619

620

=== 2.4.1 Device Payload, FPORT~=5 ===

621

622

623

Include device configure status. Once SDI-12-LB Joined the network, it will uplink this message to the server.

624

625

Users can also use the downlink command(0x26 01) to ask SDI-12-LB to resend this uplink.

626

627

(% border="1" cellspacing="4" style="background-color:#f7faff; width:437px" %)

628

|(% colspan="6" style="width:434px" %)**Device Status (FPORT=5)**

Example parse in TTNv3

633

634

[[image:1675215946738-635.png]]

635

636

637

**Sensor Model**: For SDI-12-LB, this value is 0x17

638

639

**Firmware Version**: 0x0100, Means: v1.0.0 version

**Frequency Band**:

*0x01: EU868

*0x02: US915

*0x03: IN865

*0x04: AU915

*0x05: KZ865

*0x06: RU864

*0x07: AS923

*0x08: AS923-1

*0x09: AS923-2

*0x0a: AS923-3

*0x0b: CN470

*0x0c: EU433

*0x0d: KR920

*0x0e: MA869

**Sub-Band**:

AU915 and US915:value 0x00 ~~ 0x08

675

676

CN470: value 0x0B ~~ 0x0C

677

678

Other Bands: Always 0x00

**Battery Info**:

Check the battery voltage.

Ex1: 0x0B45 = 2885mV

Ex2: 0x0B49 = 2889mV

=== 2.4.2 Uplink Payload, FPORT~=2 ===

691

692

693

There are different cases for uplink. See below

694

695

* SDI-12 Debug Command return: FPORT=100

696

697

* Periodically Uplink: FPORT=2

698

699

(% border="1" cellspacing="4" style="background-color:#f7faff; width:510px" %)

700

|(% style="width:93px" %)(((

701

**Size(bytes)**

702

)))|(% style="width:83px" %)**2**|(% style="width:70px" %)**1**|(% style="width:234px" %)**Length depends on the return from the commands**

703

|(% style="width:93px" %)**Value**|(% style="width:83px" %)(((

Battery(mV)

&

Interrupt_Flag

)))|(% style="width:70px" %)[[PAYLOAD_VER>>path:#Probe_Model]]|(% style="width:234px" %)(((

708

If the valid payload is too long and exceed the maximum support.

709

Payload length in server,server will show payload not provided in the LoRaWAN server.

710

)))

711

712

[[image:1675216282284-923.png]]

713

714

715

=== 2.4.3 Battery Info ===

716

717

718

Check the battery voltage for SDI-12-LB.

Ex1: 0x0B45 = 2885mV

Ex2: 0x0B49 = 2889mV

=== 2.4.4 Interrupt Pin ===

726

727

728

This data field shows if this packet is generated by **Interrupt Pin** or not. [[Click here>>path:#Int_mod]] for the hardware and software set up. Note: The Internet Pin is a separate pin in the screw terminal. See [[pin mapping>>path:#pins]].

**Example:**

Ex1: 0x0B45:0x0B&0x80= 0x00 Normal uplink packet.

733

734

Ex2: 0x8B49:0x8B&0x80= 0x80 Interrupt Uplink Packet.

735

736

737

=== 2.4.5 Payload version ===

=== 2.4.6 Decode payload in The Things Network ===

742

743

744

While using TTN network, you can add the payload format to decode the payload.

745

746

[[image:1675216779406-595.png]]

747

748

749

There is no fix payload decoder in LoRaWAN server because the SDI-12 sensors returns are different. User need to write the decoder themselves for their case.

750

751

SDI-12-LB TTN Payload Decoder: [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>url:https://github.com/dragino/dragino-end-node-decoder]]

752

753

754

== 2.5 Uplink Interval ==

755

756

757

The SDI-12-LB by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link:

758

759

[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval>>url:http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval]]

== 2.6 Frequency Plans ==

765

766

767

The SDI-12-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.

768

769

[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]

== 2.7 Firmware Change Log ==

774

775

776

**Firmware download link:**

777

778

[[https:~~/~~/www.dropbox.com/sh/gf1glloczbzz19h/AABbuYI4WY6VdAmpXo6o1V2Ka?dl=0>>url:https://www.dropbox.com/sh/gf1glloczbzz19h/AABbuYI4WY6VdAmpXo6o1V2Ka?dl=0]]

779

780

781

= 3. Configure SDI-12-LB via AT Command or LoRaWAN Downlink =

782

783

784

Use can configure SDI-12-LB via AT Command or LoRaWAN Downlink.

785

786

* AT Command Connection: See [[FAQ>>path:#AT_COMMAND]].

787

* LoRaWAN Downlink instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.

788

789

790

There are two kinds of commands to configure SDI-12-LB, they are:

791

792

* **General Commands**.

793

794

These commands are to configure:

795

796

* General system settings like: uplink interval.

797

* LoRaWAN protocol & radio related command.

798

799

They are same for all Dragino Device which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:

800

801

[[http:~~/~~/wiki.dragino.com/index.php?title=End_Device_Downlink_Command>>url:http://wiki.dragino.com/index.php?title=End_Device_Downlink_Command]]

802

803

804

* **Commands special design for SDI-12-LB**

805

806

These commands only valid for SDI-12-LB, as below:

807

808

809

== 3.1 Set Transmit Interval Time ==

810

811

812

Feature: Change LoRaWAN End Node Transmit Interval.

813

814

(% style="color:blue" %)**AT Command: AT+TDC**

815

816

(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)

817

|=(% style="width: 156px;" %)**Command Example**|=(% style="width: 137px;" %)**Function**|=**Response**

818

|(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((

819

30000

820

OK

821

the interval is 30000ms = 30s

822

)))

823

|(% style="width:156px" %)AT+TDC=60000|(% style="width:137px" %)Set Transmit Interval|(((

824

OK

825

Set transmit interval to 60000ms = 60 seconds

826

)))

827

828

(% style="color:blue" %)**Downlink Command: 0x01**

829

830

831

Format: Command Code (0x01) followed by 3 bytes time value.

832

833

If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.

834

835

* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds

836

* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds

837

838

== 3.2 Set Interrupt Mode ==

839

840

Feature, Set Interrupt mode for GPIO_EXIT.

841

842

(% style="color:blue" %)**AT Command: AT+INTMOD**

843

844

(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)

845

|=**Command Example**|=**Function**|=**Response**

846

|AT+INTMOD=?|Show current interrupt mode|(((

847

0

848

OK

849

the mode is 0 = No interruption

850

)))

851

|AT+INTMOD=2|(((

852

Set Transmit Interval

853

~1. (Disable Interrupt),

854

2. (Trigger by rising and falling edge)

855

3. (Trigger by falling edge)

856

4. (Trigger by rising edge)

857

)))|OK

858

859

(% style="color:blue" %)**Downlink Command: 0x06**

860

861

Format: Command Code (0x06) followed by 3 bytes.

862

863

This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.

864

865

* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode

866

* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger

867

868

869

== 3.3 Set the output time ==

870

871

872

Feature, Control the output 3V3 , 5V or 12V.

873

874

(% style="color:blue" %)**AT Command: AT+3V3T**

875

876

(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:474px" %)

877

|=(% style="width: 154px;" %)**Command Example**|=(% style="width: 201px;" %)**Function**|=(% style="width: 116px;" %)**Response**

878

|(% style="width:154px" %)AT+3V3T=?|(% style="width:201px" %)Show 3V3 open time.|(% style="width:116px" %)(((

0

OK

)))

|(% style="width:154px" %)AT+3V3T=0|(% style="width:201px" %)Normally open 3V3 power supply.|(% style="width:116px" %)(((

OK

default setting

)))

|(% style="width:154px" %)AT+3V3T=1000|(% style="width:201px" %)Close after a delay of 1000 milliseconds.|(% style="width:116px" %)(((

887

OK

888

)))

889

|(% style="width:154px" %)AT+3V3T=65535|(% style="width:201px" %)Normally closed 3V3 power supply.|(% style="width:116px" %)(((

OK

)))

(% style="color:blue" %)**AT Command: AT+5VT**

894

895

(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:470px" %)

896

|=(% style="width: 155px;" %)**Command Example**|=(% style="width: 196px;" %)**Function**|=(% style="width: 114px;" %)**Response**

897

|(% style="width:155px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:114px" %)(((

0

OK

)))

|(% style="width:155px" %)AT+5VT=0|(% style="width:196px" %)Normally closed 5V power supply.|(% style="width:114px" %)(((

OK

default setting

)))

|(% style="width:155px" %)AT+5VT=1000|(% style="width:196px" %)Close after a delay of 1000 milliseconds.|(% style="width:114px" %)(((

906

OK

907

)))

908

|(% style="width:155px" %)AT+5VT=65535|(% style="width:196px" %)Normally open 5V power supply.|(% style="width:114px" %)(((

OK

)))

(% style="color:blue" %)**AT Command: AT+12VT**

913

914

(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:443px" %)

915

|=(% style="width: 156px;" %)**Command Example**|=(% style="width: 199px;" %)**Function**|=(% style="width: 83px;" %)**Response**

916

|(% style="width:156px" %)AT+12VT=?|(% style="width:199px" %)Show 12V open time.|(% style="width:83px" %)(((

0

OK

)))

|(% style="width:156px" %)AT+12VT=0|(% style="width:199px" %)Normally closed 12V power supply.|(% style="width:83px" %)OK

921

|(% style="width:156px" %)AT+12VT=500|(% style="width:199px" %)Close after a delay of 500 milliseconds.|(% style="width:83px" %)(((

OK

)))

(% style="color:blue" %)**Downlink Command: 0x07**

926

927

Format: Command Code (0x07) followed by 3 bytes.

928

929

The first byte is which power, the second and third bytes are the time to turn on.

930

931

* Example 1: Downlink Payload: 070101F4 **~-~-->** AT+3V3T=500

932

* Example 2: Downlink Payload: 0701FFFF **~-~-->** AT+3V3T=65535

933

* Example 3: Downlink Payload: 070203E8 **~-~-->** AT+5VT=1000

934

* Example 4: Downlink Payload: 07020000 **~-~-->** AT+5VT=0

935

* Example 5: Downlink Payload: 070301F4 **~-~-->** AT+12VT=500

936

* Example 6: Downlink Payload: 07030000 **~-~-->** AT+12VT=0

937

938

939

== 3.4 Set the all data mode ==

940

941

Feature, Set the all data mode.

942

943

**AT Command: AT+ALLDATAMOD**

944

945

|**Command Example**|**Function**|**Response**

946

|AT+ALLDATAMOD=?|Show current all data mode|(((

0

OK

)))

|AT+ALLDATAMOD=1|Set all data mode is 1.|OK

953

954

**Downlink Command: 0xAB**

955

956

Format: Command Code (0xAB) followed by 1 bytes.

957

958

* Example 1: Downlink Payload: AB 00 ~/~/ AT+ALLDATAMOD=0

959

* Example 2: Downlink Payload: AB 01 ~/~/ AT+ALLDATAMOD=1

960

961

962

== 3.5 Set the splicing payload for uplink ==

963

964

Feature, splicing payload for uplink.

965

966

**AT Command: AT+DATAUP**

967

968

|**Command Example**|**Function**|**Response**

969

|AT+DATAUP =?|Show current splicing payload for uplink mode|(((

0

OK

)))

|AT+DATAUP =0|(((

Set splicing payload for uplink mode is 0.

)))|(((

OK

)))

|AT+DATAUP =1|Set splicing payload for uplink mode is 1 , and the each splice uplink is sent sequentially.|OK

979

|AT+DATAUP =1,20000|(((

980

Set splicing payload for uplink mode is 1, and the uplink interval of each splice to 20000 milliseconds.

981

)))|OK

982

983

**Downlink Command: 0xAD**

984

985

Format: Command Code (0xAD) followed by 1 bytes or 5 bytes.

986

987

* Example 1: Downlink Payload: AD 00 ~/~/ AT+DATAUP=0

988

* Example 2: Downlink Payload: AD 01 ~/~/ AT+DATAUP =1

989

* Example 3: Downlink Payload: AD 01 00 00 14~/~/ AT+DATAUP =1,20000

990

991

This means that the interval is set to 0x000014=20S

992

993

994

== 3.6 Set the payload version ==

995

996

Feature, Set the payload version.

997

998

**AT Command: AT+PAYVER**

999

1000

|**Command Example**|**Function**|**Response**

1001

|AT+PAYVER=?|Show current payload version|(((

1

OK

)))

|AT+PAYVER=5|Set payload version is 5.|OK

1006

1007

**Downlink Command: 0xAE**

1008

1009

Format: Command Code (0xAE) followed by 1 bytes.

1010

1011

* Example 1: Downlink Payload: AE 01 ~/~/ AT+PAYVER=1

1012

* Example 2: Downlink Payload: AE 05 ~/~/ AT+PAYVER=5

1013

1014

= 4. Battery & how to replace =

1015

1016

== 4.1 Battery Type ==

1017

1018

1019

PS-LB is equipped with a [[8500mAH ER26500 Li-SOCI2 battery>>https://www.dropbox.com/sh/w9l2oa3ytpculph/AAAPtt-apH4lYfCj-2Y6lHvQa?dl=0]]. The battery is un-rechargeable battery with low discharge rate targeting for 8~~10 years use. This type of battery is commonly used in IoT target for long-term running, such as water meter.

1020

1021

1022

The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.

1023

1024

[[image:1675146710956-626.png]]

1025

1026

1027

Minimum Working Voltage for the PS-LB:

PS-LB: 2.45v ~~ 3.6v

== 4.2 Replace Battery ==

1033

1034

1035

Any battery with range 2.45 ~~ 3.6v can be a replacement. We recommend to use Li-SOCl2 Battery.

1036

1037

And make sure the positive and negative pins match.

1038

1039

1040

== 4.3 Power Consumption Analyze ==

1041

1042

1043

Dragino Battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.

1044

1045

Instruction to use as below:

1046

1047

(% style="color:blue" %)**Step 1:**(%%) Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dropbox.com/sh/zwex6i331j5oeq2/AACIMf9f_v2qsJ39CuMQ5Py_a?dl=0>>https://www.dropbox.com/sh/zwex6i331j5oeq2/AACIMf9f_v2qsJ39CuMQ5Py_a?dl=0]]

1048

1049

(% style="color:blue" %)**Step 2:**(%%) Open it and choose

* Product Model

* Uplink Interval

* Working Mode

And the Life expectation in difference case will be shown on the right.

1056

1057

[[image:1675146895108-304.png]]

1058

1059

1060

The battery related documents as below:

1061

1062

* [[Battery Dimension>>https://www.dropbox.com/s/ox5g9njwjle7aw3/LSN50-Battery-Dimension.pdf?dl=0]],

1063

* [[Lithium-Thionyl Chloride Battery datasheet, Tech Spec>>https://www.dropbox.com/sh/d4oyfnp8o94180o/AABQewCNSh5GPeQH86UxRgQQa?dl=0]]

1064

* [[Lithium-ion Battery-Capacitor datasheet>>https://www.dropbox.com/s/791gjes2lcbfi1p/SPC_1520_datasheet.jpg?dl=0]], [[Tech Spec>>https://www.dropbox.com/s/4pkepr9qqqvtzf2/SPC1520%20Technical%20Specification20171123.pdf?dl=0]]

1065

1066

[[image:image-20230131145708-3.png]]

1067

1068

1069

=== 4.3.1 Battery Note ===

1070

1071

1072

The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.

1073

1074

1075

=== 4.3.2 Replace the battery ===

1076

1077

1078

You can change the battery in the PS-LB.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won't be voltage drop between battery and main board.

1079

1080

The default battery pack of PS-LB includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)

= 5. Remote Configure device =

1085

1086

== 5.1 Connect via BLE ==

1087

1088

1089

Please see this instruction for how to configure via BLE: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]]

1090

1091

1092

== 5.2 AT Command Set ==

= 6. OTA firmware update =

1098

1099

1100

Please see this link for how to do OTA firmware update.

1101

1102

[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]

= 7. Order Info =

Part Number: SDI-12-LB-XXX

1110

XXX: The default frequency band

1111

1112

AS923: LoRaWAN AS923 band

1113

AU915: LoRaWAN AU915 band

1114

EU433: LoRaWAN EU433 band

1115

EU868: LoRaWAN EU868 band

1116

KR920: LoRaWAN KR920 band

1117

US915: LoRaWAN US915 band

1118

IN865: LoRaWAN IN865 band

1119

CN470: LoRaWAN CN470 band

= 8. Packing Info =

**Package Includes**:

1131

1132

* SDI-12-LB SDI-12 to LoRaWAN Converter x 1

1133

1134

**Dimension and weight**:

* Device Size: cm

* Device Weight: g

* Package Size / pcs : cm

* Weight / pcs : g

= 9. Support =

* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.

1147

1148

* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]

1149

1150

Wiki source code of SDI-12-LB -- SDI-12 to LoRaWAN Converter User Manual

Applications

Navigation