Skip to Content
Last modified by Mengting Qiu on 2025/07/03 15:42
From version 41.12
edited by Xiaoling
on 2023/02/01 16:36
Change comment: There is no comment for this version
To version 90.9
edited by Xiaoling
on 2024/01/03 18:21
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -SDI-12-LB -- SDI-12 to LoRaWAN Converter User Manual
1 +SDI-12-LB/LS -- SDI-12 to LoRaWAN Converter User Manual
Content
... ... @@ -1,8 +1,16 @@
1 +
2 +
1 1  (% style="text-align:center" %)
2 -[[image:image-20230131183542-1.jpeg||height="694" width="694"]]
4 +[[image:image-20240103165259-3.png]]
3 3  
4 -**Table of Contents：**
5 5  
7 +
8 +
9 +
10 +
11 +
12 +**Table of Contents:**
13 +
6 6  {{toc/}}
7 7  
8 8  
... ... @@ -22,20 +22,32 @@
22 22  == 1.1 ​What is SDI-12 to LoRaWAN Converter ==
23 23  
24 24  
25 -The Dragino (% style="color:blue" %)**SDI-12-LB**(%%) is a (% style="color:blue" %)**SDI-12 to LoRaWAN Converter **(%%)designed for Smart Agriculture solution.
33 +(((
34 +The Dragino (% style="color:blue" %)**SDI-12-LB/LS**(%%) is a (% style="color:blue" %)**SDI-12 to LoRaWAN Converter **(%%)designed for Smart Agriculture solution.
35 +)))
26 26  
37 +(((
27 27  SDI-12 (Serial Digital Interface at 1200 baud) is an asynchronous [[serial communications>>url:https://en.wikipedia.org/wiki/Serial_communication]] protocol for intelligent sensors that monitor environment data. SDI-12 protocol is widely used in Agriculture sensor and Weather Station sensors.
39 +)))
28 28  
29 -SDI-12-LB has SDI-12 interface and support 12v output to power external SDI-12 sensor. It can get the environment data from SDI-12 sensor and sends out the data via LoRaWAN wireless protocol.
41 +(((
42 +SDI-12-LB/LS has SDI-12 interface and support 12v output to power external SDI-12 sensor. It can get the environment data from SDI-12 sensor and sends out the data via LoRaWAN wireless protocol.
43 +)))
30 30  
31 -The LoRa wireless technology used in SDI-12-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
45 +(((
46 +The LoRa wireless technology used in SDI-12-LB/LS allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
47 +)))
32 32  
33 -SDI-12-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
49 +(((
50 +SDI-12-LB/LS is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%) or (% style="color:blue" %)**solar powered + li-on battery**(%%) it is designed for long term use up to 5 years.
51 +)))
34 34  
35 -Each SDI-12-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
53 +(((
54 +Each SDI-12-LB/LS is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
55 +)))
36 36  
37 37  
38 -[[image:image-20230201084414-1.png||height="464" width="1108"]]
58 +[[image:image-20230201084414-1.png||_mstalt="427765" height="464" width="1108"]]
39 39  
40 40  
41 41  == ​1.2 Features ==
... ... @@ -43,7 +43,7 @@
43 43  
44 44  * LoRaWAN 1.0.3 Class A
45 45  * Ultra-low power consumption
46 -* Controllable 5v and 12v output to power external sensor
66 +* Controllable 3.3v, 5v and 12v output to power external sensor
47 47  * SDI-12 Protocol to connect to SDI-12 Sensor
48 48  * Monitor Battery Level
49 49  * Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
... ... @@ -51,8 +51,10 @@
51 51  * Support wireless OTA update firmware
52 52  * Uplink on periodically
53 53  * Downlink to change configure
54 -* 8500mAh Battery for long term use
74 +* 8500mAh Li/SOCl2 Battery (SDI-12-LB)
75 +* Solar panel + 3000mAh Li-on battery (SDI-12-LS)
55 55  
77 +
56 56  == 1.3 Specification ==
57 57  
58 58  
... ... @@ -64,7 +64,8 @@
64 64  
65 65  (% style="color:#037691" %)**Common DC Characteristics:**
66 66  
67 -* Supply Voltage: 2.5v ~~ 3.6v
89 +* Supply Voltage: Built-in Battery, 2.5v ~~ 3.6v
90 +* Support current: 5V 300mA, 12V 100mA
68 68  * Operating Temperature: -40 ~~ 85°C
69 69  
70 70  (% style="color:#037691" %)**LoRa Spec:**
... ... @@ -102,10 +102,9 @@
102 102  == 1.4 Connect to SDI-12 Sensor ==
103 103  
104 104  
128 +[[image:1675212538524-889.png||_mstalt="298272"]]
105 105  
106 -[[image:1675212538524-889.png]]
107 107  
108 -
109 109  == 1.5 Sleep mode and working mode ==
110 110  
111 111  
... ... @@ -117,33 +117,31 @@
117 117  == 1.6 Button & LEDs ==
118 118  
119 119  
120 -[[image:1675212633011-651.png]]
142 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/RS485-LB_Waterproof_RS485UART_to_LoRaWAN_Converter/WebHome/image-20240103160425-4.png?rev=1.1||alt="image-20240103160425-4.png"]]
121 121  
122 -
123 -
124 -(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
125 -|=(% style="width: 167px;" %)**Behavior on ACT**|=(% style="width: 117px;" %)**Function**|=(% style="width: 225px;" %)**Action**
126 -|(% style="width:167px" %)Pressing ACT between 1s < time < 3s|(% style="width:117px" %)Send an uplink|(% style="width:225px" %)(((
144 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
145 +|=(% style="width: 167px;background-color:#4F81BD;color:white" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 225px;background-color:#4F81BD;color:white" %)**Action**
146 +|(% style="background-color:#f2f2f2; width:167px" %)Pressing ACT between 1s < time < 3s|(% style="background-color:#f2f2f2; width:117px" %)Send an uplink|(% style="background-color:#f2f2f2; width:225px" %)(((
127 127  If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.
128 128  Meanwhile, BLE module will be active and user can connect via BLE to configure device.
129 129  )))
130 -|(% style="width:167px" %)Pressing ACT for more than 3s|(% style="width:117px" %)Active Device|(% style="width:225px" %)(((
131 -(% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network.
132 -(% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
150 +|(% style="background-color:#f2f2f2; width:167px" %)Pressing ACT for more than 3s|(% style="background-color:#f2f2f2; width:117px" %)Active Device|(% style="background-color:#f2f2f2; width:225px" %)(((
151 +(% style="background-color:#f2f2f2; color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network.
152 +(% style="background-color:#f2f2f2; color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
133 133  Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device join or not join LoRaWAN network.
134 134  )))
135 -|(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means PS-LB is in Deep Sleep Mode.
155 +|(% style="background-color:#f2f2f2; width:167px" %)Fast press ACT 5 times.|(% style="background-color:#f2f2f2; width:117px" %)Deactivate Device|(% style="background-color:#f2f2f2; width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means PS-LB-NA is in Deep Sleep Mode.
136 136  
137 137  == 1.7 Pin Mapping ==
138 138  
139 139  
140 -[[image:1675213198663-754.png]]
160 +[[image:1675213198663-754.png||_mstalt="297167"]]
141 141  
142 142  
143 143  == 1.8 BLE connection ==
144 144  
145 145  
146 -SDI-12-LB support BLE remote configure.
166 +SDI-12-LB/LS support BLE remote configure.
147 147  
148 148  BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
149 149  
... ... @@ -156,20 +156,28 @@
156 156  
157 157  == 1.9 Mechanical ==
158 158  
179 +=== 1.9.1 for LB version ===
159 159  
160 -[[image:image-20230201090139-2.png]]
161 161  
162 -[[image:image-20230201090139-3.png]]
182 +[[image:image-20230201090139-2.png||_mstalt="428623"]]
163 163  
164 -[[image:image-20230201090139-4.png]]
184 +[[image:image-20230201090139-3.png||_mstalt="428987"]]
165 165  
186 +[[image:image-20230201090139-4.png||_mstalt="429351"]]
166 166  
188 +
189 +=== 1.9.2 for LS version ===
190 +
191 +
192 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SN50v3-LB/WebHome/image-20231231203439-3.png?width=886&height=385&rev=1.1||alt="image-20231231203439-3.png"]]
193 +
194 +
167 167  = 2. Configure SDI-12 to connect to LoRaWAN network =
168 168  
169 169  == 2.1 How it works ==
170 170  
171 171  
172 -The SDI-12-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and activate the SDI-12-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
200 +The SDI-12-LB/LS is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and activate the SDI-12-LB/LS. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
173 173  
174 174  
175 175  == 2.2 Quick guide to connect to LoRaWAN server (OTAA) ==
... ... @@ -178,60 +178,59 @@
178 178  Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
179 179  
180 180  
181 -[[image:image-20230201090528-5.png||height="465" width="1111"]]
209 +[[image:image-20230201090528-5.png||_mstalt="430300" height="465" width="1111"]]
182 182  
183 183  
184 184  The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
185 185  
186 186  
187 -(% style="color:blue" %)**Step 1**(%%): Create a device in TTN with the OTAA keys from SDI-12-LB.
215 +(% style="color:blue" %)**Step 1**(%%): Create a device in TTN with the OTAA keys from SDI-12-LB/LS.
188 188  
189 -Each SDI-12-LB is shipped with a sticker with the default device EUI as below:
217 +Each SDI-12-LB/LS is shipped with a sticker with the default device EUI as below:
190 190  
219 +[[image:image-20230426084456-1.png||height="241" width="519"]]
191 191  
192 -[[image:image-20230201152430-20.jpeg]]
193 193  
194 -
195 195  You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
196 196  
197 197  
198 198  (% style="color:blue" %)**Register the device**
199 199  
200 -[[image:1675213652444-622.png]]
227 +[[image:1675213652444-622.png||_mstalt="293657"]]
201 201  
202 202  
203 203  (% style="color:blue" %)**Add APP EUI and DEV EUI**
204 204  
205 205  
206 -[[image:1675213661769-223.png]]
233 +[[image:1675213661769-223.png||_mstalt="295217"]]
207 207  
208 208  
209 209  (% style="color:blue" %)**Add APP EUI in the application**
210 210  
211 211  
212 -[[image:1675213675852-577.png]]
239 +[[image:1675213675852-577.png||_mstalt="297947"]]
213 213  
214 214  
215 215  (% style="color:blue" %)**Add APP KEY**
216 216  
217 -[[image:1675213686734-883.png]]
244 +[[image:1675213686734-883.png||_mstalt="298064"]]
218 218  
219 219  
220 -(% style="color:blue" %)**Step 2**(%%): Activate on SDI-12-LB
247 +(% style="color:blue" %)**Step 2**(%%): Activate on SDI-12-LB/LS
221 221  
222 222  
223 -Press the button for 5 seconds to activate the SDI-12-LB.
250 +Press the button for 5 seconds to activate the SDI-12-LB/LS.
224 224  
225 225  (% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode** (%%)for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
226 226  
227 227  
228 -[[image:1675213704414-644.png]]
255 +[[image:1675213704414-644.png||_mstalt="293748"]]
229 229  
230 230  
231 231  == ​2.3 SDI-12 Related Commands ==
232 232  
233 233  
234 -User need to configure SDI-12-LB to communicate with SDI-12 sensors otherwise the uplink payload will only include a few bytes.
261 +User need to configure SDI-12-LB/LS to communicate with SDI-12 sensors otherwise the uplink payload will only include a few bytes.
235 235  
236 236  
237 237  === 2.3.1 Basic SDI-12 debug command ===
... ... @@ -239,15 +239,15 @@
239 239  
240 240  User can run some basic SDI-12 command to debug the connection to the SDI-12 sensor. These commands can be sent via AT Command or LoRaWAN downlink command.
241 241  
242 -If SDI-12 sensor return value after get these commands, //SDI-12-LB// will uplink the return on FPORT=100, otherwise, if there is no response from SDI-12 sensor. //SDI-12-LB// will uplink NULL (0x 4E 55 4C 4C) to server.
269 +If SDI-12 sensor return value after get these commands, //SDI-12-LB/LS// will uplink the return on FPORT=100, otherwise, if there is no response from SDI-12 sensor. //SDI-12-LB/LS// will uplink NULL (0x 4E 55 4C 4C) to server.
243 243  
244 244  The following is the display information on the serial port and the server.
245 245  
246 246  
247 -[[image:image-20230201091027-6.png]]
274 +[[image:image-20230201091027-6.png||_mstalt="429065"]]
248 248  
249 249  
250 -[[image:image-20230201091027-7.png||height="261" width="1179"]]
277 +[[image:image-20230201091027-7.png||_mstalt="429429" height="261" width="1179"]]
251 251  
252 252  
253 253  
... ... @@ -265,10 +265,10 @@
265 265  The following is the display information on the serial port and the server.
266 266  
267 267  
268 -[[image:image-20230201091257-8.png]]
295 +[[image:image-20230201091257-8.png||_mstalt="431392"]]
269 269  
270 270  
271 -[[image:image-20230201091257-9.png||height="225" width="1242"]]
298 +[[image:image-20230201091257-9.png||_mstalt="431756" height="225" width="1242"]]
272 272  
273 273  
274 274  ==== (% style="color:blue" %)**aM!,aMC!, aM1!- aM9!, aMC1!- aMC9!**(%%) ====
... ... @@ -301,10 +301,10 @@
301 301  The following is the display information on the serial port and the server.
302 302  
303 303  
304 -[[image:image-20230201091630-10.png]]
331 +[[image:image-20230201091630-10.png||_mstalt="449995"]]
305 305  
306 306  
307 -[[image:image-20230201091630-11.png||height="247" width="1165"]]
334 +[[image:image-20230201091630-11.png||_mstalt="450372" height="247" width="1165"]]
308 308  
309 309  
310 310  
... ... @@ -338,14 +338,13 @@
338 338  The following is the display information on the serial port and the server.
339 339  
340 340  
341 -[[image:image-20230201091954-12.png]]
368 +[[image:image-20230201091954-12.png||_mstalt="453687"]]
342 342  
343 343  
344 -[[image:image-20230201091954-13.png||height="203" width="1117"]]
371 +[[image:image-20230201091954-13.png||_mstalt="454064" height="203" width="1117"]]
345 345  
346 346  
347 347  
348 -
349 349  ==== (% style="color:blue" %)**aR0!- aR9!,  aRC0!- aRC9!**(%%) ====
350 350  
351 351  
... ... @@ -371,10 +371,10 @@
371 371  The following is the display information on the serial port and the server.
372 372  
373 373  
374 -[[image:image-20230201092208-14.png]]
400 +[[image:image-20230201092208-14.png||_mstalt="452283"]]
375 375  
376 376  
377 -[[image:image-20230201092208-15.png||height="214" width="1140"]]
403 +[[image:image-20230201092208-15.png||_mstalt="452660" height="214" width="1140"]]
378 378  
379 379  
380 380  === 2.3.2 Advance SDI-12 Debug command ===
... ... @@ -383,7 +383,7 @@
383 383  This command can be used to debug all SDI-12 command.
384 384  
385 385  
386 -LoRaWAN Downlink: A8 aa xx xx xx xx bb cc
412 +LoRaWAN Downlink: A8 aa xx xx xx xx bb cc dd
387 387  
388 388  (% style="color:#037691" %)**aa **(%%): total SDI-12 command length
389 389  
... ... @@ -393,9 +393,11 @@
393 393  
394 394  (% style="color:#037691" %)**cc **(%%): 0: don't uplink return to LoRaWAN, 1: Uplink return to LoRaWAN on FPORT=100
395 395  
422 +(% style="color:#037691" %)**dd: **(%%) 0: Do not use aD0! command access, 1: use aD0! command access.
396 396  
397 -(% style="color:blue" %)**Example: **(%%) AT+CFGDEV =0RC0!,1
398 398  
425 +(% style="color:blue" %)**Example1: **(%%) AT+CFGDEV =0RC0!,1
426 +
399 399  (% style="color:#037691" %)**0RC0! **(%%): SDI-12 Command,
400 400  
401 401  (% style="color:#037691" %)**1 **(%%): Delay 1 second.  ( 0: 810 mini-second)
... ... @@ -406,12 +406,31 @@
406 406  The following is the display information on the serial port and the server.
407 407  
408 408  
409 -[[image:image-20230201092355-16.png]]
437 +[[image:image-20230201092355-16.png||_mstalt="453960"]]
410 410  
411 411  
412 -[[image:image-20230201092355-17.png||height="426" width="1135"]]
440 +[[image:image-20230201092355-17.png||_mstalt="454337" height="426" width="1135"]]
413 413  
414 414  
443 +(% style="color:blue" %)**Example2: **(%%) AT+CFGDEV =0M!,1,1
444 +
445 +(% style="color:#037691" %)**0M! **(%%): SDI-12 Command,
446 +
447 +(% style="color:#037691" %)**1 **(%%): Delay 1 second.  ( 0: 810 mini-second)
448 +
449 +(% style="color:#037691" %)**1 **(%%): Use aD0! command access.
450 +
451 +Equal Downlink: 0xA8 03 30  4D 21 01 01 01
452 +
453 +
454 +The following is the display information on the serial port and the server.
455 +
456 +
457 +[[image:image-20230628091055-1.png||height="368" width="462"]]
458 +
459 +[[image:image-20230628091130-2.png||height="258" width="879"]]
460 +
461 +
415 415  === 2.3.3 Convert ASCII to String ===
416 416  
417 417  
... ... @@ -424,12 +424,12 @@
424 424  
425 425  1) AT+CONVFORM=0, string Convert String from String to ASCII
426 426  
427 -[[image:1675214845056-885.png]]
474 +[[image:1675214845056-885.png||_mstalt="297622"]]
428 428  
429 429  
430 430  2) AT+CONVFORM=1, ASCII Convert ASCII to String.
431 431  
432 -[[image:1675214856590-846.png]]
479 +[[image:1675214856590-846.png||_mstalt="297739"]]
433 433  
434 434  
435 435  === 2.3.4 Define periodically SDI-12 commands and uplink. ===
... ... @@ -437,7 +437,7 @@
437 437  
438 438  AT+COMMANDx & AT+DATACUTx
439 439  
440 -User can define max 15 SDI-12 Commands (AT+COMMAND1 ~~ AT+COMMANDF). On each uplink period (TDC time, default 20 minutes), SDI-12-LB will send these SDI-12 commands and wait for return from SDI-12 sensors. SDI-12-LB will then combine these returns and uplink via LoRaWAN.
487 +User can define max 15 SDI-12 Commands (AT+COMMAND1 ~~ AT+COMMANDF). On each uplink period (TDC time, default 20 minutes), SDI-12-LB/LS will send these SDI-12 commands and wait for return from SDI-12 sensors. SDI-12-LB/LS will then combine these returns and uplink via LoRaWAN.
441 441  
442 442  
443 443  * (% style="color:blue" %)**AT Command:**
... ... @@ -450,7 +450,7 @@
450 450  
451 451  (% style="color:red" %)**var3**(%%): Whether to send //addrD0!// to get return after var2 timeout. 0: Don't Send //addrD0! //; 1: Send //addrD0!//.
452 452  
453 -(% style="color:red" %)**var4**(%%): validation check for return. If return invalid, SDI-12-LB will resend this command. Max 2 retries.
500 +(% style="color:red" %)**var4**(%%): validation check for return. If return invalid, SDI-12-LB/LS will resend this command. Max 3 retries.
454 454  
455 455  (% style="color:red" %)**0 **(%%) No validation check;
456 456  
... ... @@ -466,9 +466,9 @@
466 466  
467 467  (% style="color:blue" %)**AT+DATACUTx**(%%) : This command defines how to handle the return from AT+COMMANDx, max return length is 100 bytes.
468 468  
469 -(% border="1" style="background-color:#f7faff; width:436px" %)
470 -|(% style="width:433px" %)(((
471 -**AT+DATACUTx=a,b,c**
516 +(% border="1" style="width:436px" %)
517 +|(% style="background-color:#f2f2f2; width:433px" %)(((
518 +(% style="color:#0070c0" %)**AT+DATACUTx=a,b,c**
472 472  
473 473  **a**:  length for the return of AT+COMMAND
474 474  
... ... @@ -477,14 +477,14 @@
477 477  **c**:  define the position for valid value. 
478 478  )))
479 479  
480 -For example, if return from AT+COMMAND1 is “013METER   TER12 112T12-00024895” , Below AT+DATACUT1 will get different result to combine payload:
527 +For example, if return from AT+COMMAND1 is “013METER   TER12 112T12-00024895<CR><LF>” , Below AT+DATACUT1 will get different result to combine payload:
481 481  
482 482  
483 -(% border="1" cellspacing="4" style="background-color:#f7faff; width:510px" %)
484 -|(% style="width:170px" %)**AT+DATACUT1 value**|(% style="width:338px" %)**Final Result to combine Payload**
485 -|(% style="width:170px" %)34,1,1+2+3|(% style="width:338px" %)0D 00 01 30 31 33
486 -|(% style="width:170px" %)34,2,1~~8+12~~16|(% style="width:338px" %)0D 00 01 30 31 33 4D 45 54 45 52 54 45 52 31 32
487 -|(% style="width:170px" %)34,2,1~~34|(% style="width:338px" %)0D 00 01 30 31 33 4D 45 54 45 52 20 20 20 54 45 52 31 32 20 31 31 32 54 31 32 2D 30 30 30 32 34 38 39 35 0D 0A
530 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
531 +|=(% style="width: 164px;background-color:#4F81BD;color:white" %)**AT+DATACUT1 value**|=(% style="width: 344px;background-color:#4F81BD;color:white" %)**Final Result to combine Payload**
532 +|(% style="background-color:#f2f2f2; width:164px" %)34,1,1+2+3|(% style="background-color:#f2f2f2; width:344px" %)0D 00 01 30 31 33
533 +|(% style="background-color:#f2f2f2; width:164px" %)34,2,1~~8+12~~16|(% style="background-color:#f2f2f2; width:344px" %)0D 00 01 30 31 33 4D 45 54 45 52 54 45 52 31 32
534 +|(% style="background-color:#f2f2f2; width:164px" %)34,2,1~~34|(% style="background-color:#f2f2f2; width:344px" %)0D 00 01 30 31 33 4D 45 54 45 52 20 20 20 54 45 52 31 32 20 31 31 32 54 31 32 2D 30 30 30 32 34 38 39 35 0D 0A
488 488  
489 489  * (% style="color:blue" %)** Downlink Payload:**
490 490  
... ... @@ -499,16 +499,17 @@
499 499  Where:
500 500  
501 501  * (% style="color:#037691" %)**MM **(%%): the AT+COMMAND or AT+DATACUT to be set. Value from 01 ~~ 0F,
502 -* (% style="color:#037691" %)**NN **(%%):  1: set the AT+DATACUT value ; 2: set the AT+DATACUT value.
549 +* (% style="color:#037691" %)**NN **(%%):  1: set the AT+COMMAND value ; 2: set the AT+DATACUT value.
503 503  * (% style="color:#037691" %)**LL **(%%):  The length of AT+COMMAND or AT+DATACUT command
504 504  * (% style="color:#037691" %)**XX XX XX XX **(%%): AT+COMMAND or AT+DATACUT command
505 -* (% style="color:#037691" %)**YY **(%%):  If YY=0, RS485-LN will execute the downlink command without uplink; if YY=1, RS485-LN will execute an uplink after got this command. 
552 +* (% style="color:#037691" %)**YY **(%%):  If YY=0, SDI-12-LB/LS will execute the downlink command without uplink; if YY=1, SDI-12-LB/LS will execute an uplink after got this command. 
506 506  
507 507  (% style="color:blue" %)**Example:**
508 508  
509 -[[image:image-20230201094129-18.png]]
556 +[[image:image-20230201094129-18.png||_mstalt="455065"]]
510 510  
511 511  
559 +
512 512  (% style="color:blue" %)**Clear SDI12 Command**
513 513  
514 514  The AT+COMMANDx and AT+DATACUTx settings are stored in special location, user can use below command to clear them.
... ... @@ -522,7 +522,7 @@
522 522  Etc. AT+CMDEAR=1,10 means erase AT+COMMAND1/AT+DATACUT1 to AT+COMMAND10/AT+DATACUT10
523 523  
524 524  
525 -* (% style="color:#037691" %)** Downlink Payload:**
573 +* (% style="color:#037691" %)**Downlink Payload:**
526 526  
527 527  (% style="color:#4f81bd" %)**0x09 aa bb**(%%)  same as AT+CMDEAR=aa,bb
528 528  
... ... @@ -532,7 +532,7 @@
532 532  
533 533  Below shows a screen shot how the results combines together to a uplink payload.
534 534  
535 -[[image:1675215745275-920.png]]
583 +[[image:1675215745275-920.png||_mstalt="295334"]]
536 536  
537 537  
538 538  If user don't want to use DATACUT for some command, he simply want to uplink all returns. AT+ALLDATAMOD can be set to 1.
... ... @@ -543,7 +543,7 @@
543 543  (% style="color:#4f81bd" %)**For example: **(%%) as below photo, AT+ALLDATAMOD=1, but AT+DATACUT1 has been set, AT+DATACUT1 will be still effect the result.
544 544  
545 545  
546 -[[image:1675215782925-448.png]]
594 +[[image:1675215782925-448.png||_mstalt="297466"]]
547 547  
548 548  
549 549  If AT+ALLDATAMOD=1, (% style="color:#4f81bd" %)**FX,X**(%%) will be added in the payload, FX specify which command is used and X specify the length of return. for example in above screen, F1 05 means the return is from AT+COMMAND1 and the return is 5 bytes.
... ... @@ -552,7 +552,6 @@
552 552  
553 553  (% style="color:blue" %)**Compose Uplink**
554 554  
555 -
556 556  (% style="color:#4f81bd" %)**AT+DATAUP=0**
557 557  
558 558  Compose the uplink payload with value returns in sequence and send with **__A SIGNLE UPLINK__**.
... ... @@ -562,7 +562,7 @@
562 562  Where PAYVER is defined by AT+PAYVER, below is an example screen shot.
563 563  
564 564  
565 -[[image:1675215828102-844.png]]
612 +[[image:1675215828102-844.png||_mstalt="294645"]]
566 566  
567 567  
568 568  (% style="color:#4f81bd" %)**AT+DATAUP=1**
... ... @@ -577,7 +577,7 @@
577 577  1. PAYLOAD# (1 byte): Number of this uplink. (from 0,1,2,3…,to PAYLOAD COUNT)
578 578  1. DATA: Valid value: max 6 bytes(US915 version here, Notice*!) for each uplink so each uplink <= 11 bytes. For the last uplink, DATA will might less than 6 bytes
579 579  
580 -[[image:1675215848113-696.png]]
627 +[[image:1675215848113-696.png||_mstalt="296998"]]
581 581  
582 582  
583 583  (% style="color:red" %)**Notice: the Max bytes is according to the max support bytes in different Frequency Bands for lowest SF. As below:**
... ... @@ -594,65 +594,56 @@
594 594  
595 595  == 2.4 Uplink Payload ==
596 596  
597 -
598 -Uplink payloads have two types:
599 -
600 -* Distance Value: Use FPORT=2
601 -* Other control commands: Use other FPORT fields.
602 -
603 -The application server should parse the correct value based on FPORT settings.
604 -
605 -
606 606  === 2.4.1 Device Payload, FPORT~=5 ===
607 607  
608 608  
609 -Include device configure status. Once SDI-12-LB Joined the network, it will uplink this message to the server.
647 +Include device configure status. Once SDI-12-LB/LS Joined the network, it will uplink this message to the server.
610 610  
611 -Users can also use the downlink command(0x26 01) to ask SDI-12-LB to resend this uplink.
649 +Users can also use the downlink command(0x26 01) to ask SDI-12-LB/LS to resend this uplink.
612 612  
613 -(% border="1" cellspacing="4" style="background-color:#f7faff; width:437px" %)
614 -|(% colspan="6" style="width:434px" %)**Device Status (FPORT=5)**
615 -|(% style="width:102px" %)**Size (bytes)**|(% style="width:67px" %)**1**|(% style="width:80px" %)**2**|(% style="width:89px" %)**1**|(% style="width:52px" %)**1**|(% style="width:44px" %)**2**
616 -|(% style="width:102px" %)**Value**|(% style="width:67px" %)Sensor Model|(% style="width:80px" %)Firmware Version|(% style="width:89px" %)Frequency Band|(% style="width:52px" %)Sub-band|(% style="width:44px" %)BAT
651 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
652 +|(% colspan="6" style="background-color:#4F81BD;color:white" %)**Device Status (FPORT=5)**
653 +|(% style="background-color:#f2f2f2; width:103px" %)**Size (bytes)**|(% style="background-color:#f2f2f2; width:72px" %)**1**|(% style="background-color:#f2f2f2" %)**2**|(% style="background-color:#f2f2f2; width:91px" %)**1**|(% style="background-color:#f2f2f2; width:86px" %)**1**|(% style="background-color:#f2f2f2; width:44px" %)**2**
654 +|(% style="background-color:#f2f2f2; width:103px" %)**Value**|(% style="background-color:#f2f2f2; width:72px" %)Sensor Model|(% style="background-color:#f2f2f2" %)Firmware Version|(% style="background-color:#f2f2f2; width:91px" %)Frequency Band|(% style="background-color:#f2f2f2; width:86px" %)Sub-band|(% style="background-color:#f2f2f2; width:44px" %)BAT
617 617  
618 618  Example parse in TTNv3
619 619  
620 -[[image:1675215946738-635.png]]
658 +[[image:1675215946738-635.png||_mstalt="297778"]]
621 621  
622 622  
623 -(% style="color:#037691" %)**Sensor Model**(%%): For SDI-12-LB, this value is 0x17
661 +(% style="color:#037691" %)**Sensor Model**(%%): For SDI-12-LB/LS, this value is 0x17
624 624  
625 625  (% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
626 626  
627 627  (% style="color:#037691" %)**Frequency Band**:
628 628  
629 -*0x01: EU868
667 +0x01: EU868
630 630  
631 -*0x02: US915
669 +0x02: US915
632 632  
633 -*0x03: IN865
671 +0x03: IN865
634 634  
635 -*0x04: AU915
673 +0x04: AU915
636 636  
637 -*0x05: KZ865
675 +0x05: KZ865
638 638  
639 -*0x06: RU864
677 +0x06: RU864
640 640  
641 -*0x07: AS923
679 +0x07: AS923
642 642  
643 -*0x08: AS923-1
681 +0x08: AS923-1
644 644  
645 -*0x09: AS923-2
683 +0x09: AS923-2
646 646  
647 -*0x0a: AS923-3
685 +0x0a: AS923-3
648 648  
649 -*0x0b: CN470
687 +0x0b: CN470
650 650  
651 -*0x0c: EU433
689 +0x0c: EU433
652 652  
653 -*0x0d: KR920
691 +0x0d: KR920
654 654  
655 -*0x0e: MA869
693 +0x0e: MA869
656 656  
657 657  
658 658  (% style="color:#037691" %)**Sub-Band**:
... ... @@ -682,26 +682,26 @@
682 682  
683 683  * Periodically Uplink: FPORT=2
684 684  
685 -(% border="1" cellspacing="4" style="background-color:#f7faff; width:510px" %)
686 -|(% style="width:93px" %)(((
723 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
724 +|=(% style="width: 90px;background-color:#4F81BD;color:white" %)(((
687 687  **Size(bytes)**
688 -)))|(% style="width:83px" %)**2**|(% style="width:70px" %)**1**|(% style="width:234px" %)**Length depends on the return from the commands**
689 -|(% style="width:93px" %)**Value**|(% style="width:83px" %)(((
726 +)))|=(% style="width: 80px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 90px;background-color:#4F81BD;color:white" %)**1**|=(% style="width: 240px;background-color:#4F81BD;color:white" %)**Length depends on the return from the commands**
727 +|(% style="width:93px" %)Value|(% style="width:83px" %)(((
690 690  Battery(mV)
691 691  &
692 692  Interrupt_Flag
693 -)))|(% style="width:70px" %)[[PAYLOAD_VER>>||anchor="H3.6Setthepayloadversion"]]|(% style="width:234px" %)(((
731 +)))|(% style="width:91px" %)[[PAYLOAD_VER>>||anchor="H3.6Setthepayloadversion"]]|(% style="width:212px" %)(((
694 694  If the valid payload is too long and exceed the maximum support.
695 695  Payload length in server,server will show payload not provided in the LoRaWAN server.
696 696  )))
697 697  
698 -[[image:1675216282284-923.png]]
736 +[[image:1675216282284-923.png||_mstalt="295633"]]
699 699  
700 700  
701 701  === 2.4.3 Battery Info ===
702 702  
703 703  
704 -Check the battery voltage for SDI-12-LB.
742 +Check the battery voltage for SDI-12-LB/LS.
705 705  
706 706  Ex1: 0x0B45 = 2885mV
707 707  
... ... @@ -723,37 +723,305 @@
723 723  === 2.4.5 Payload version ===
724 724  
725 725  
764 +The version number of the payload, mainly used for decoding. The default is 01.
726 726  
766 +
727 727  === 2.4.6 ​Decode payload in The Things Network ===
728 728  
729 729  
730 730  While using TTN network, you can add the payload format to decode the payload.
731 731  
732 -[[image:1675216779406-595.png]]
772 +[[image:1675216779406-595.png||_mstalt="298376"]]
733 733  
734 734  
735 735  There is no fix payload decoder in LoRaWAN server because the SDI-12 sensors returns are different. User need to write the decoder themselves for their case.
736 736  
737 -SDI-12-LB TTN Payload Decoder: [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>url:https://github.com/dragino/dragino-end-node-decoder]]
777 +SDI-12-LB/LS TTN Payload Decoder: [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>url:https://github.com/dragino/dragino-end-node-decoder]]
738 738  
739 739  
740 740  == 2.5 Uplink Interval ==
741 741  
742 742  
743 -The SDI-12-LB by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link:
783 +The SDI-12-LB/LS by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link:
744 744  
745 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval]]]]
785 +[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval]]
746 746  
747 747  
748 -== 2.6 Frequency Plans ==
788 +== 2.6 Examples To Set SDI commands ==
749 749  
790 +=== 2.6.1 Examples 1 ~-~- General Example ===
750 750  
751 -The SDI-12-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
752 752  
793 +COM port and SDI-12 sensor communication converted to SDI-12-LB/LS and SDI-12 sensor communication.
794 +
795 +[[image:image-20230222143809-1.png||_mstalt="429962" height="564" width="729"]]
796 +
797 +
798 +(% style="color:blue" %)**1) The AT+COMMANDx command is applied to the red arrow part, and sends the SDI12 command to the SDI12 sensor:**
799 +
800 +a. Send the first command and get the first reply：
801 +
802 +(% style="color:#037691" %)**AT+COMMANDx=1I!,0,0,1**
803 +
804 +b. Send the second command and get the second reply：
805 +
806 +(% style="color:#037691" %)**AT+COMMANDx=2I!,0,0,1**
807 +
808 +c. Send the third command and get the third reply：
809 +
810 +(% style="color:#037691" %)**AT+COMMANDx=3I!,0,0,1**
811 +
812 +d. Send the fourth command and get the fourth reply：
813 +
814 +(% style="color:#037691" %)**AT+COMMANDx=4I!,0,0,1**
815 +
816 +e. Send the fifth command plus the sixth command, get the sixth reply：
817 +
818 +(% style="color:#037691" %)**AT+COMMANDx=1M!,2,1,1**
819 +
820 +f. Send the seventh command plus the eighth command, get the eighth reply：
821 +
822 +(% style="color:#037691" %)**AT+COMMANDx=2M!,2,1,1**
823 +
824 +g. Send the ninth command plus the tenth command, get the tenth reply：
825 +
826 +(% style="color:#037691" %)**AT+COMMANDx=3M!,1,1,1**
827 +
828 +h. Send the eleventh command plus the twelfth command, get the twelfth reply：
829 +
830 +(% style="color:#037691" %)**AT+COMMANDx=4M!,1,1,1**
831 +
832 +
833 +(% style="color:blue" %)**2) The AT+DATACUTx command is applied to the green arrow part, receiving and cut out data from the SDI12 sensor：**
834 +
835 +a. The first reply, all 34 characters: ”113TRUEBNERSMT100038220303182331<CR><LF>”
836 +
837 +Cut out all characters: (% _mstmutation="1" style="color:#037691" %)**AT+ALLDATAMOD=1 or AT+DATACUTx=34,2,1~~34**(% style="color:#037691" %);
838 +
839 +b. The sixth reply, all 31 characters：”1+19210+1.04+0.00+22.49+11.75<CR><LF>”
840 +
841 +Cut out all characters: (% _mstmutation="1" style="color:#037691" %)**AT+ALLDATAMOD=1 or AT+DATACUTx=31,2,1~~31**(% style="color:#037691" %);
842 +
843 +c. The eighth reply, all 31 characters：”2+18990+1.08+0.00+22.24+11.80<CR><LF>”
844 +
845 +Cut out all characters: (% _mstmutation="1" style="color:#037691" %)**AT+ALLDATAMOD=1 or AT+DATACUTx=31,2,1~~31**(% style="color:#037691" %);
846 +
847 +d. The tenth reply, all 15 characters：”3-2919.8+24.0<CR><LF>”
848 +
849 +Cut out all characters: (% _mstmutation="1" style="color:#037691" %)**AT+ALLDATAMOD=1 or AT+DATACUTx=15,2,1~~15**(% style="color:#037691" %);
850 +
851 +e. The twelfth reply, all 25 characters：”4+30.8+22.84+4.7+954.38<CR><LF>”
852 +
853 +Partial cut, the cut sensor address and the first two parameters：(% style="color:#037691" %)**AT+DATACUTx=25,2,1~~12, cut out the character field ” 4+30.8+22.84”**.
854 +
855 +
856 +=== 2.6.2 Example 2 ~-~- Connect to Hygrovue10 ===
857 +
858 +==== 2.6.2.1 Reference Manual and Command ====
859 +
860 +
861 +* [[Hygrovue10 Product Page>>https://www.campbellsci.com/hygrovue10]]
862 +
863 +* Commands to be used in PC and output.
864 +
865 +~1. check device address
866 +
867 +2. change device address
868 +
869 +3. check device ID
870 +
871 +4. start measure
872 +
873 +5. Get Meausre result
874 +
875 +[[image:image-20230603120209-2.png||height="281" width="267"]]
876 +
877 +
878 +==== 2.6.2.2 Hardware Connection to SDI-12-LB/LS ====
879 +
880 +
881 +[[image:image-20230603120515-3.png]]
882 +
883 +
884 +==== 2.6.2.3 Commands set in SDI-12-LB/LS and uplink payload ====
885 +
886 +
887 +[[image:image-20230603120648-4.png]]
888 +
889 +[[image:image-20230603120726-5.png]]
890 +
891 +
892 +**Data in TTN:**
893 +
894 +[[image:image-20230603120859-6.png||height="118" width="1285"]]
895 +
896 +
897 +=== 2.6.3 Example 3 ~-~- Connect to SIL-400 ===
898 +
899 +==== 2.6.3.1 Reference Manual and Command ====
900 +
901 +
902 +* [[SIL-400 Product Page>>https://www.apogeeinstruments.com/sil-411-commercial-grade-sdi-12-digital-output-standard-field-of-view-infrared-radiometer-sensor/]]
903 +
904 +* Commands to be used in PC and output.
905 +
906 +~1. check device address
907 +
908 +2. change device address
909 +
910 +3. check device ID
911 +
912 +4. start measure
913 +
914 +5. Get Meausre result
915 +
916 +[[image:image-20230603121606-7.png||height="242" width="307"]]
917 +
918 +
919 +==== 2.6.3.2 Hardware Connection to SDI-12-LB/LS ====
920 +
921 +
922 +[[image:image-20230603121643-8.png||height="442" width="656"]]
923 +
924 +
925 +==== 2.6.3.3 Commands set in SDI-12-LB/LS and uplink payload ====
926 +
927 +
928 +[[image:image-20230603121721-9.png]]
929 +
930 +[[image:image-20230628090323-1.png||height="414" width="694"]]
931 +
932 +Data in TTN:
933 +
934 +[[image:image-20230603121826-11.png||height="155" width="1104"]]
935 +
936 +
937 +
938 +=== 2.6.4 Example 4 ~-~- Connect to TEROS-12 ===
939 +
940 +==== 2.6.4.1 Reference Manual and Command ====
941 +
942 +
943 +* [[TEROS-12 Product Page>>https://www.metergroup.com/en/meter-environment/products/teros-12-soil-moisture-sensor]]
944 +
945 +* Commands to be used in PC and output.
946 +
947 +1.check device address
948 +
949 +2.change device address
950 +
951 +3.check device ID
952 +
953 +4.start measure
954 +
955 +5.Get Meausre result
956 +
957 +[[image:image-20230603122248-16.png||height="196" width="198"]]
958 +
959 +
960 +==== 2.6.4.2 Hardware Connection to SDI-12-LB/LS ====
961 +
962 +
963 +[[image:image-20230603122212-15.png||height="502" width="667"]]
964 +
965 +
966 +==== 2.6.4.3 Commands set in SDI-12-LB/LS and uplink payload ====
967 +
968 +
969 +[[image:image-20230603122040-12.png]]
970 +
971 +[[image:image-20230603122109-13.png||height="469" width="762"]]
972 +
973 +
974 +**Data in TTN:**
975 +
976 +[[image:image-20230603122139-14.png||height="148" width="1128"]]
977 +
978 +
979 +=== 2.6.5 Example 5 ~-~- Connect to SIL-400/TEROS-12 & Hygrovue10 ===
980 +
981 +==== 2.6.5.1 Important Notice! ====
982 +
983 +
984 +* The product page and reference command see above example 2,3,4
985 +
986 +* All of these SDI-12 sensors use the same address (address 0) by default. So we need to change their address to different address, by using **aAb!** command. See above example.
987 +
988 +* The sensor needs to be powered to a steady statue. So the 12VT time need to be set to the maximum stable time for the sensors. in this example, it is 13 seconds.
989 +
990 +* If these SDI-12 sensors are powered by external power source. It will add 300uA in the total current in SDI-12-LB/LS.
991 +
992 +==== 2.6.5.2 Hardware Connection to SDI-12-LB/LS ====
993 +
994 +
995 +[[image:image-20230603122508-17.png||height="526" width="742"]]
996 +
997 +
998 +==== 2.6.5.3 Commands set in SDI-12-LB/LS and uplink payload ====
999 +
1000 +
1001 +[[image:image-20230603122549-18.png]]
1002 +
1003 +[[image:image-20230603122623-19.png||height="483" width="1121"]]
1004 +
1005 +
1006 +**Data in TTN:**
1007 +
1008 +[[image:image-20230603122719-20.png||height="151" width="1179"]]
1009 +
1010 +
1011 +=== 2.6.6 Example 6 ~-~- Connect to ENTELECHY-EP_SDI-12 ===
1012 +
1013 +==== 2.6.6.1 Reference Manual and Command ====
1014 +
1015 +
1016 +* [[https:~~/~~/enviroprosoilprobes.com/wp-content/uploads/2019/11/ENTELECHY-EP_SDI-12-Commands.pdf>>url:https://enviroprosoilprobes.com/wp-content/uploads/2019/11/ENTELECHY-EP_SDI-12-Commands.pdf]]
1017 +
1018 +* Commands to be used in PC and output.
1019 +
1020 +1.check device address
1021 +
1022 +2.change device address
1023 +
1024 +3.check device ID
1025 +
1026 +4.start measure
1027 +
1028 +5.Get Meausre result
1029 +
1030 +
1031 +[[image:image-20230627174559-3.png]]
1032 +
1033 +
1034 +==== 2.6.6.2 Hardware Connection to SDI-12-LB/LS ====
1035 +
1036 +
1037 +[[image:image-20230627174446-2.png]]
1038 +
1039 +
1040 +
1041 +==== 2.6.6.3 Commands set in SDI-12-LB/LS and uplink payload ====
1042 +
1043 +
1044 +[[image:image-20230627175513-4.png||height="596" width="576"]]
1045 +
1046 +[[image:image-20230627175736-5.png||height="429" width="693"]]
1047 +
1048 +
1049 +**Data in TTN:**
1050 +
1051 +[[image:image-20230627180303-6.png||height="292" width="1171"]]
1052 +
1053 +
1054 +== 2.7 Frequency Plans ==
1055 +
1056 +
1057 +The SDI-12-LB/LS uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
1058 +
753 753  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
754 754  
755 755  
756 -== 2.7 Firmware Change Log ==
1062 +== 2.8 Firmware Change Log ==
757 757  
758 758  
759 759  **Firmware download link:**
... ... @@ -760,17 +760,16 @@
760 760  
761 761  [[https:~~/~~/www.dropbox.com/sh/qrbgbikb109lkiv/AACBR-v_ZhZAMengcY7Nsa1ja?dl=0>>https://www.dropbox.com/sh/qrbgbikb109lkiv/AACBR-v_ZhZAMengcY7Nsa1ja?dl=0]]
762 762  
763 -
764 764  
765 -= 3. Configure SDI-12-LB via AT Command or LoRaWAN Downlink =
1070 += 3. Configure SDI-12-LB/LS via AT Command or LoRaWAN Downlink =
766 766  
767 767  
768 -Use can configure SDI-12-LB via AT Command or LoRaWAN Downlink.
1073 +Use can configure SDI-12-LB/LS via AT Command or LoRaWAN Downlink.
769 769  
770 770  * AT Command Connection: See [[FAQ>>||anchor="H7.FAQ"]].
771 771  * LoRaWAN Downlink instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
772 772  
773 -There are two kinds of commands to configure SDI-12-LB, they are:
1078 +There are two kinds of commands to configure SDI-12-LB/LS, they are:
774 774  
775 775  * (% style="color:blue" %)**General Commands**.
776 776  
... ... @@ -784,12 +784,12 @@
784 784  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
785 785  
786 786  
787 -* (% style="color:blue" %)**Commands special design for SDI-12-LB**
1092 +* (% style="color:blue" %)**Commands special design for SDI-12-LB/LS**
788 788  
789 -These commands only valid for SDI-12-LB, as below:
1094 +These commands only valid for SDI-12-LB/LS, as below:
790 790  
791 791  
792 -== ​​​​​​​3.1 Set Transmit Interval Time ==
1097 +== 3.1 Set Transmit Interval Time ==
793 793  
794 794  
795 795  Feature: Change LoRaWAN End Node Transmit Interval.
... ... @@ -796,14 +796,14 @@
796 796  
797 797  (% style="color:blue" %)**AT Command: AT+TDC**
798 798  
799 -(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
800 -|=(% style="width: 156px;" %)**Command Example**|=(% style="width: 137px;" %)**Function**|=**Response**
801 -|(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
1104 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1105 +|=(% style="width: 160px; background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 160px; background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 190px;background-color:#4F81BD;color:white" %)**Response**
1106 +|(% style="background-color:#f2f2f2; width:157px" %)AT+TDC=?|(% style="background-color:#f2f2f2; width:166px" %)Show current transmit Interval|(% style="background-color:#f2f2f2" %)(((
802 802  30000
803 803  OK
804 804  the interval is 30000ms = 30s
805 805  )))
806 -|(% style="width:156px" %)AT+TDC=60000|(% style="width:137px" %)Set Transmit Interval|(((
1111 +|(% style="background-color:#f2f2f2; width:157px" %)AT+TDC=60000|(% style="background-color:#f2f2f2; width:166px" %)Set Transmit Interval|(% style="background-color:#f2f2f2" %)(((
807 807  OK
808 808  Set transmit interval to 60000ms = 60 seconds
809 809  )))
... ... @@ -810,7 +810,6 @@
810 810  
811 811  (% style="color:blue" %)**Downlink Command: 0x01**
812 812  
813 -
814 814  Format: Command Code (0x01) followed by 3 bytes time value.
815 815  
816 816  If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
... ... @@ -825,20 +825,20 @@
825 825  
826 826  (% style="color:blue" %)**AT Command: AT+INTMOD**
827 827  
828 -(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
829 -|=(% style="width: 156px;" %)**Command Example**|=(% style="width: 187px;" %)**Function**|=(% style="width: 165px;" %)**Response**
830 -|(% style="width:156px" %)AT+INTMOD=?|(% style="width:187px" %)Show current interrupt mode|(% style="width:165px" %)(((
1132 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1133 +|=(% style="width: 154px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 196px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 160px;background-color:#4F81BD;color:white" %)**Response**
1134 +|(% style="background-color:#f2f2f2; width:154px" %)AT+INTMOD=?|(% style="background-color:#f2f2f2; width:196px" %)Show current interrupt mode|(% style="background-color:#f2f2f2; width:157px" %)(((
831 831  0
832 832  OK
833 -the mode is 0 = No interruption
1137 +the mode is 0 =Disable Interrupt
834 834  )))
835 -|(% style="width:156px" %)AT+INTMOD=2|(% style="width:187px" %)(((
1139 +|(% style="background-color:#f2f2f2; width:154px" %)AT+INTMOD=2|(% style="background-color:#f2f2f2; width:196px" %)(((
836 836  Set Transmit Interval
837 -~1. (Disable Interrupt),
838 -2. (Trigger by rising and falling edge)
839 -3. (Trigger by falling edge)
840 -4. (Trigger by rising edge)
841 -)))|(% style="width:165px" %)OK
1141 +0. (Disable Interrupt),
1142 +~1. (Trigger by rising and falling edge)
1143 +2. (Trigger by falling edge)
1144 +3. (Trigger by rising edge)
1145 +)))|(% style="background-color:#f2f2f2; width:157px" %)OK
842 842  
843 843  (% style="color:blue" %)**Downlink Command: 0x06**
844 844  
... ... @@ -856,52 +856,54 @@
856 856  
857 857  (% style="color:blue" %)**AT Command: AT+3V3T**
858 858  
859 -(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:474px" %)
860 -|=(% style="width: 154px;" %)**Command Example**|=(% style="width: 201px;" %)**Function**|=(% style="width: 116px;" %)**Response**
861 -|(% style="width:154px" %)AT+3V3T=?|(% style="width:201px" %)Show 3V3 open time.|(% style="width:116px" %)(((
1163 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:474px" %)
1164 +|=(% style="width: 154px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 201px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 120px;background-color:#4F81BD;color:white" %)**Response**
1165 +|(% style="background-color:#f2f2f2; width:154px" %)AT+3V3T=?|(% style="background-color:#f2f2f2; width:201px" %)Show 3V3 open time.|(% style="background-color:#f2f2f2; width:116px" %)(((
862 862  0
863 863  OK
864 864  )))
865 -|(% style="width:154px" %)AT+3V3T=0|(% style="width:201px" %)Normally open 3V3 power supply.|(% style="width:116px" %)(((
1169 +|(% style="background-color:#f2f2f2; width:154px" %)AT+3V3T=0|(% style="background-color:#f2f2f2; width:201px" %)Normally open 3V3 power supply.|(% style="background-color:#f2f2f2; width:116px" %)(((
866 866  OK
867 867  default setting
868 868  )))
869 -|(% style="width:154px" %)AT+3V3T=1000|(% style="width:201px" %)Close after a delay of 1000 milliseconds.|(% style="width:116px" %)(((
1173 +|(% style="background-color:#f2f2f2; width:154px" %)AT+3V3T=1000|(% style="background-color:#f2f2f2; width:201px" %)Close after a delay of 1000 milliseconds.|(% style="background-color:#f2f2f2; width:116px" %)(((
870 870  OK
871 871  )))
872 -|(% style="width:154px" %)AT+3V3T=65535|(% style="width:201px" %)Normally closed 3V3 power supply.|(% style="width:116px" %)(((
1176 +|(% style="background-color:#f2f2f2; width:154px" %)AT+3V3T=65535|(% style="background-color:#f2f2f2; width:201px" %)Normally closed 3V3 power supply.|(% style="background-color:#f2f2f2; width:116px" %)(((
873 873  OK
874 874  )))
875 875  
876 876  (% style="color:blue" %)**AT Command: AT+5VT**
877 877  
878 -(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:470px" %)
879 -|=(% style="width: 155px;" %)**Command Example**|=(% style="width: 196px;" %)**Function**|=(% style="width: 114px;" %)**Response**
880 -|(% style="width:155px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:114px" %)(((
1182 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:470px" %)
1183 +|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 196px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 119px;background-color:#4F81BD;color:white" %)**Response**
1184 +|(% style="background-color:#f2f2f2; width:155px" %)AT+5VT=?|(% style="background-color:#f2f2f2; width:196px" %)Show 5V open time.|(% style="background-color:#f2f2f2; width:114px" %)(((
881 881  0
882 882  OK
883 883  )))
884 -|(% style="width:155px" %)AT+5VT=0|(% style="width:196px" %)Normally closed 5V power supply.|(% style="width:114px" %)(((
1188 +|(% style="background-color:#f2f2f2; width:155px" %)AT+5VT=0|(% style="background-color:#f2f2f2; width:196px" %)Normally closed 5V power supply.|(% style="background-color:#f2f2f2; width:114px" %)(((
885 885  OK
886 886  default setting
887 887  )))
888 -|(% style="width:155px" %)AT+5VT=1000|(% style="width:196px" %)Close after a delay of 1000 milliseconds.|(% style="width:114px" %)(((
1192 +|(% style="background-color:#f2f2f2; width:155px" %)AT+5VT=1000|(% style="background-color:#f2f2f2; width:196px" %)Close after a delay of 1000 milliseconds.|(% style="background-color:#f2f2f2; width:114px" %)(((
889 889  OK
890 890  )))
891 -|(% style="width:155px" %)AT+5VT=65535|(% style="width:196px" %)Normally open 5V power supply.|(% style="width:114px" %)(((
1195 +|(% style="background-color:#f2f2f2; width:155px" %)AT+5VT=65535|(% style="background-color:#f2f2f2; width:196px" %)Normally open 5V power supply.|(% style="background-color:#f2f2f2; width:114px" %)(((
892 892  OK
893 893  )))
894 894  
895 -(% style="color:blue" %)**AT Command: AT+12VT**
1199 +(% style="color:blue" %)**AT Command: AT+12VT **
896 896  
897 -(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:443px" %)
898 -|=(% style="width: 156px;" %)**Command Example**|=(% style="width: 199px;" %)**Function**|=(% style="width: 83px;" %)**Response**
899 -|(% style="width:156px" %)AT+12VT=?|(% style="width:199px" %)Show 12V open time.|(% style="width:83px" %)(((
1201 +(% style="color:blue" %)**(The v1.2 version is enabled for 1 second by default, and the version below v1.2 is disabled by default)**
1202 +
1203 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:443px" %)
1204 +|=(% style="width: 156px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 199px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 89px;background-color:#4F81BD;color:white" %)**Response**
1205 +|(% style="background-color:#f2f2f2; width:156px" %)AT+12VT=?|(% style="background-color:#f2f2f2; width:199px" %)Show 12V open time.|(% style="background-color:#f2f2f2; width:83px" %)(((
900 900  0
901 901  OK
902 902  )))
903 -|(% style="width:156px" %)AT+12VT=0|(% style="width:199px" %)Normally closed 12V power supply.|(% style="width:83px" %)OK
904 -|(% style="width:156px" %)AT+12VT=500|(% style="width:199px" %)Close after a delay of 500 milliseconds.|(% style="width:83px" %)(((
1209 +|(% style="background-color:#f2f2f2; width:156px" %)AT+12VT=0|(% style="background-color:#f2f2f2; width:199px" %)Normally closed 12V power supply.|(% style="background-color:#f2f2f2; width:83px" %)OK
1210 +|(% style="background-color:#f2f2f2; width:156px" %)AT+12VT=500|(% style="background-color:#f2f2f2; width:199px" %)Close after a delay of 500 milliseconds.|(% style="background-color:#f2f2f2; width:83px" %)(((
905 905  OK
906 906  )))
907 907  
... ... @@ -925,13 +925,13 @@
925 925  
926 926  (% style="color:blue" %)**AT Command: AT+ALLDATAMOD**
927 927  
928 -(% border="1" cellspacing="4" style="background-color:#f7faff; width:437px" %)
929 -|=**Command Example**|=**Function**|=**Response**
930 -|AT+ALLDATAMOD=?|Show current all data mode|(((
1234 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:437px" %)
1235 +|=(% style="background-color:#4F81BD;color:white" %)**Command Example**|=(% style="background-color:#4F81BD;color:white" %)**Function**|=(% style="background-color:#4F81BD;color:white" %)**Response**
1236 +|(% style="background-color:#f2f2f2" %)AT+ALLDATAMOD=?|(% style="background-color:#f2f2f2" %)Show current all data mode|(% style="background-color:#f2f2f2" %)(((
931 931  0
932 932  OK
933 933  )))
934 -|AT+ALLDATAMOD=1|Set all data mode is 1.|OK
1240 +|(% style="background-color:#f2f2f2" %)AT+ALLDATAMOD=1|(% style="background-color:#f2f2f2" %)Set all data mode is 1.|(% style="background-color:#f2f2f2" %)OK
935 935  
936 936  (% style="color:blue" %)**Downlink Command: 0xAB**
937 937  
... ... @@ -947,21 +947,21 @@
947 947  
948 948  (% style="color:blue" %)**AT Command: AT+DATAUP**
949 949  
950 -(% border="1" cellspacing="4" style="background-color:#f7faff; width:510px" %)
951 -|=(% style="width: 154px;" %)**Command Example**|=(% style="width: 266px;" %)**Function**|=**Response**
952 -|(% style="width:154px" %)AT+DATAUP =?|(% style="width:266px" %)Show current splicing payload for uplink mode|(((
1256 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1257 +|=(% style="width: 154px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 266px;background-color:#4F81BD;color:white" %)**Function**|=(% style="background-color:#4F81BD;color:white" %)**Response**
1258 +|(% style="background-color:#f2f2f2; width:154px" %)AT+DATAUP =?|(% style="background-color:#f2f2f2; width:266px" %)Show current splicing payload for uplink mode|(% style="background-color:#f2f2f2" %)(((
953 953  0
954 954  OK
955 955  )))
956 -|(% style="width:154px" %)AT+DATAUP =0|(% style="width:266px" %)(((
1262 +|(% style="background-color:#f2f2f2; width:154px" %)AT+DATAUP =0|(% style="background-color:#f2f2f2; width:266px" %)(((
957 957  Set splicing payload for uplink mode is 0.
958 -)))|(((
1264 +)))|(% style="background-color:#f2f2f2" %)(((
959 959  OK
960 960  )))
961 -|(% style="width:154px" %)AT+DATAUP =1|(% style="width:266px" %)Set splicing payload for uplink mode is 1 , and the each splice uplink is sent sequentially.|OK
962 -|(% style="width:154px" %)AT+DATAUP =1,20000|(% style="width:266px" %)(((
1267 +|(% style="background-color:#f2f2f2; width:154px" %)AT+DATAUP =1|(% style="background-color:#f2f2f2; width:266px" %)Set splicing payload for uplink mode is 1 , and the each splice uplink is sent sequentially.|(% style="background-color:#f2f2f2" %)OK
1268 +|(% style="background-color:#f2f2f2; width:154px" %)AT+DATAUP =1,20000|(% style="background-color:#f2f2f2; width:266px" %)(((
963 963  Set splicing payload for uplink mode is 1, and the uplink interval of each splice to 20000 milliseconds.
964 -)))|OK
1270 +)))|(% style="background-color:#f2f2f2" %)OK
965 965  
966 966  (% style="color:blue" %)**Downlink Command: 0xAD**
967 967  
... ... @@ -976,17 +976,18 @@
976 976  
977 977  == 3.6 Set the payload version ==
978 978  
1285 +
979 979  Feature, Set the payload version.
980 980  
981 981  (% style="color:blue" %)**AT Command: AT+PAYVER**
982 982  
983 -(% border="1" cellspacing="4" style="background-color:#f7faff; width:437px" %)
984 -|=(% style="width: 158px;" %)**Command Example**|=(% style="width: 192px;" %)**Function**|=**Response**
985 -|(% style="width:158px" %)AT+PAYVER=?|(% style="width:192px" %)Show current payload version|(((
1290 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:437px" %)
1291 +|=(% style="width: 158px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 192px;background-color:#4F81BD;color:white" %)**Function**|=(% style="background-color:#4F81BD;color:white" %)**Response**
1292 +|(% style="background-color:#f2f2f2; width:158px" %)AT+PAYVER=?|(% style="background-color:#f2f2f2; width:192px" %)Show current payload version|(% style="background-color:#f2f2f2" %)(((
986 986  1
987 987  OK
988 988  )))
989 -|(% style="width:158px" %)AT+PAYVER=5|(% style="width:192px" %)Set payload version is 5.|OK
1296 +|(% style="background-color:#f2f2f2; width:158px" %)AT+PAYVER=5|(% style="background-color:#f2f2f2; width:192px" %)Set payload version is 5.|(% style="background-color:#f2f2f2" %)OK
990 990  
991 991  (% style="color:blue" %)**Downlink Command: 0xAE**
992 992  
... ... @@ -995,76 +995,14 @@
995 995  * Example 1: Downlink Payload: AE 01  ~/~/  AT+PAYVER=1
996 996  * Example 2: Downlink Payload: AE 05  ~/~/  AT+PAYVER=5
997 997  
998 -= 4. Battery & how to replace =
1305 += 4. Battery & Power Consumption =
999 999  
1000 -== 4.1 Battery Type ==
1001 1001  
1308 +SDI-12-LB use ER26500 + SPC1520 battery pack and SDI-12-LS use 3000mAh Recharable Battery with Solar Panel. See below link for detail information about the battery info and how to replace.
1002 1002  
1003 -SDI-12-LB is equipped with a [[8500mAH ER26500 Li-SOCI2 battery>>https://www.dropbox.com/sh/w9l2oa3ytpculph/AAAPtt-apH4lYfCj-2Y6lHvQa?dl=0]]. The battery is un-rechargeable battery with low discharge rate targeting for 8~~10 years use. This type of battery is commonly used in IoT target for long-term running, such as water meter.
1310 +[[**Battery Info & Power Consumption Analyze**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
1004 1004  
1005 1005  
1006 -The discharge curve is not linear so can’t simply use percentage to show the battery level. Below is the battery performance.
1007 -
1008 -[[image:1675234124233-857.png]]
1009 -
1010 -
1011 -Minimum Working Voltage for the SDI-12-LB:
1012 -
1013 -SDI-12-LB:  2.45v ~~ 3.6v
1014 -
1015 -
1016 -== 4.2 Replace Battery ==
1017 -
1018 -
1019 -Any battery with range 2.45 ~~ 3.6v can be a replacement. We recommend to use Li-SOCl2 Battery.
1020 -
1021 -And make sure the positive and negative pins match.
1022 -
1023 -
1024 -== 4.3 Power Consumption Analyze ==
1025 -
1026 -
1027 -Dragino Battery powered product are all runs in Low Power mode. We have an update battery calculator which base on the measurement of the real device. User can use this calculator to check the battery life and calculate the battery life if want to use different transmit interval.
1028 -
1029 -Instruction to use as below:
1030 -
1031 -(% style="color:blue" %)**Step 1:**(%%) Downlink the up-to-date DRAGINO_Battery_Life_Prediction_Table.xlsx from: [[https:~~/~~/www.dropbox.com/sh/zwex6i331j5oeq2/AACIMf9f_v2qsJ39CuMQ5Py_a?dl=0>>https://www.dropbox.com/sh/zwex6i331j5oeq2/AACIMf9f_v2qsJ39CuMQ5Py_a?dl=0]]
1032 -
1033 -(% style="color:blue" %)**Step 2:**(%%) Open it and choose
1034 -
1035 -* Product Model
1036 -* Uplink Interval
1037 -* Working Mode
1038 -
1039 -And the Life expectation in difference case will be shown on the right.
1040 -
1041 -
1042 -[[image:1675234155374-163.png]]
1043 -
1044 -
1045 -The battery related documents as below:
1046 -
1047 -* [[Battery Dimension>>https://www.dropbox.com/s/ox5g9njwjle7aw3/LSN50-Battery-Dimension.pdf?dl=0]],
1048 -* [[Lithium-Thionyl Chloride Battery datasheet, Tech Spec>>https://www.dropbox.com/sh/d4oyfnp8o94180o/AABQewCNSh5GPeQH86UxRgQQa?dl=0]]
1049 -* [[Lithium-ion Battery-Capacitor datasheet>>https://www.dropbox.com/s/791gjes2lcbfi1p/SPC_1520_datasheet.jpg?dl=0]], [[Tech Spec>>https://www.dropbox.com/s/4pkepr9qqqvtzf2/SPC1520%20Technical%20Specification20171123.pdf?dl=0]]
1050 -
1051 -[[image:image-20230201145019-19.png]]
1052 -
1053 -
1054 -=== 4.3.1 ​Battery Note ===
1055 -
1056 -
1057 -The Li-SICO battery is designed for small current / long period application. It is not good to use a high current, short period transmit method. The recommended minimum period for use of this battery is 5 minutes. If you use a shorter period time to transmit LoRa, then the battery life may be decreased.
1058 -
1059 -
1060 -=== 4.3.2 Replace the battery ===
1061 -
1062 -
1063 -You can change the battery in the SDI-12-LB.The type of battery is not limited as long as the output is between 3v to 3.6v. On the main board, there is a diode (D1) between the battery and the main circuit. If you need to use a battery with less than 3.3v, please remove the D1 and shortcut the two pads of it so there won't be voltage drop between battery and main board.
1064 -
1065 -The default battery pack of SDI-12-LB includes a ER26500 plus super capacitor. If user can't find this pack locally, they can find ER26500 or equivalence, which will also work in most case. The SPC can enlarge the battery life for high frequency use (update period below 5 minutes)
1066 -
1067 -
1068 1068  = 5. Remote Configure device =
1069 1069  
1070 1070  == 5.1 Connect via BLE ==
... ... @@ -1087,7 +1087,7 @@
1087 1087  
1088 1088  = 7. FAQ =
1089 1089  
1090 -== 7.1 How to use AT Command to access device? ==
1335 +== 7.1 How to use AT Command  via UART to access device? ==
1091 1091  
1092 1092  
1093 1093  See: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]
... ... @@ -1109,26 +1109,36 @@
1109 1109  = 8. ​Order Info =
1110 1110  
1111 1111  
1112 -(% style="color:blue" %)**Part Number: SDI-12-LB-XXX**
1357 +(((
1358 +**Part Number: (% style="color:blue" %)SDI-12-LB-XX-YY(%%) or (% style="color:blue" %)SDI-12-LS-XX-YY**
1359 +)))
1113 1113  
1114 -XXX: The default frequency band
1361 +(((
1362 +(% style="color:blue" %)**XX**(%%): The default frequency band
1363 +)))
1115 1115  
1116 -(% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
1117 -(% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
1118 -(% style="color:red" %)**EU433**(%%): LoRaWAN EU433 band
1119 -(% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
1120 -(% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
1121 -(% style="color:red" %)**US915**(%%): LoRaWAN US915 band
1122 -(% style="color:red" %)**IN865**(%%): LoRaWAN IN865 band
1123 -(% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1365 +(((
1366 +* (% style="color:red" %)**AS923**(%%): LoRaWAN AS923 band
1367 +* (% style="color:red" %)**AU915**(%%): LoRaWAN AU915 band
1368 +* (% style="color:red" %)**EU433**(%%): LoRaWAN EU433 band
1369 +* (% style="color:red" %)**EU868**(%%): LoRaWAN EU868 band
1370 +* (% style="color:red" %)**KR920**(%%): LoRaWAN KR920 band
1371 +* (% style="color:red" %)**US915**(%%): LoRaWAN US915 band
1372 +* (% style="color:red" %)**IN865**(%%): LoRaWAN IN865 band
1373 +* (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
1374 +)))
1124 1124  
1376 +(% style="color:blue" %)**YY: **(%%)The grand connector hole size
1125 1125  
1378 +* M12: M12 hole
1379 +* M16: M16 hole
1380 +
1126 1126  = 9. Packing Info =
1127 1127  
1128 1128  
1129 1129  (% style="color:#037691" %)**Package Includes**:
1130 1130  
1131 -* SDI-12-LB SDI-12 to LoRaWAN Converter x 1
1386 +* SDI-12-LB or SDI-12-LS SDI-12 to LoRaWAN Converter x 1
1132 1132  
1133 1133  (% style="color:#037691" %)**Dimension and weight**:
1134 1134  
... ... @@ -1143,5 +1143,3 @@
1143 1143  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
1144 1144  
1145 1145  * Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
1146 -
1147 -
image-20230222143809-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +322.1 KB
Content
image-20230426084456-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +190.0 KB
Content
image-20230603120127-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +5.7 KB
Content
image-20230603120209-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +22.8 KB
Content
image-20230603120515-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +489.3 KB
Content
image-20230603120648-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +100.8 KB
Content
image-20230603120726-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +133.2 KB
Content
image-20230603120859-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +55.9 KB
Content
image-20230603121606-7.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +24.4 KB
Content
image-20230603121643-8.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +889.7 KB
Content
image-20230603121721-9.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +105.4 KB
Content
image-20230603121752-10.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +160.0 KB
Content
image-20230603121826-11.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +52.8 KB
Content
image-20230603122040-12.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +128.1 KB
Content
image-20230603122109-13.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +271.1 KB
Content
image-20230603122139-14.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +70.4 KB
Content
image-20230603122212-15.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +818.3 KB
Content
image-20230603122248-16.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +12.7 KB
Content
image-20230603122508-17.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +980.2 KB
Content
image-20230603122549-18.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +90.9 KB
Content
image-20230603122623-19.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +139.5 KB
Content
image-20230603122719-20.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Edwin
Size
... ... @@ -1,0 +1,1 @@
1 +83.8 KB
Content
image-20230627164957-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +835.0 KB
Content
image-20230627165744-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +4.6 KB
Content
image-20230627174446-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +835.0 KB
Content
image-20230627174559-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +4.6 KB
Content
image-20230627175513-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +12.0 KB
Content
image-20230627175736-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +10.4 KB
Content
image-20230627180303-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Bei
Size
... ... @@ -1,0 +1,1 @@
1 +65.1 KB
Content
image-20230628090323-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +137.2 KB
Content
image-20230628091055-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +24.9 KB
Content
image-20230628091130-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +84.0 KB
Content
image-20240103164910-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +431.6 KB
Content
image-20240103165115-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +220.0 KB
Content
image-20240103165259-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +235.3 KB
Content