Skip to Content
Last modified by Mengting Qiu on 2025/07/03 15:42
From version 141.3
edited by Xiaoling
on 2025/04/25 08:56
Change comment: There is no comment for this version
To version 90.2
edited by Xiaoling
on 2024/01/03 16:54
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,7 +1,7 @@
1 1  
2 2  
3 3  (% style="text-align:center" %)
4 -[[image:image-20240103165259-3.png||height="433" width="591"]]
4 +[[image:image-20240103165259-3.png]]
5 5  
6 6  
7 7  
... ... @@ -31,7 +31,7 @@
31 31  
32 32  
33 33  (((
34 -The Dragino (% style="color:blue" %)**SDI-12-LB/LS**(%%) is a (% style="color:blue" %)**SDI-12 to LoRaWAN Converter **(%%)designed for Smart Agriculture solution.
34 +The Dragino (% style="color:blue" %)**SDI-12-LB**(%%) is a (% style="color:blue" %)**SDI-12 to LoRaWAN Converter **(%%)designed for Smart Agriculture solution.
35 35  )))
36 36  
37 37  (((
... ... @@ -39,22 +39,25 @@
39 39  )))
40 40  
41 41  (((
42 -SDI-12-LB/LS has SDI-12 interface and support 12v output to power external SDI-12 sensor. It can get the environment data from SDI-12 sensor and sends out the data via LoRaWAN wireless protocol.
42 +SDI-12-LB has SDI-12 interface and support 12v output to power external SDI-12 sensor. It can get the environment data from SDI-12 sensor and sends out the data via LoRaWAN wireless protocol.
43 43  )))
44 44  
45 45  (((
46 -The LoRa wireless technology used in SDI-12-LB/LS allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
46 +The LoRa wireless technology used in SDI-12-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
47 47  )))
48 48  
49 49  (((
50 -SDI-12-LB/LS is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%) or (% style="color:blue" %)**solar powered + Li-ion battery,**(%%) it is designed for long term use up to 5 years.
50 +SDI-12-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
51 51  )))
52 52  
53 53  (((
54 -Each SDI-12-LB/LS is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
54 +Each SDI-12-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
55 55  )))
56 56  
57 57  
58 +[[image:image-20230201084414-1.png||_mstalt="427765" height="464" width="1108"]]
59 +
60 +
58 58  == ​1.2 Features ==
59 59  
60 60  
... ... @@ -68,8 +68,7 @@
68 68  * Support wireless OTA update firmware
69 69  * Uplink on periodically
70 70  * Downlink to change configure
71 -* 8500mAh Li/SOCl2 Battery (SDI-12-LB)
72 -* Solar panel + 3000mAh Li-ion battery (SDI-12-LS)
74 +* 8500mAh Battery for long term use
73 73  
74 74  == 1.3 Specification ==
75 75  
... ... @@ -82,7 +82,7 @@
82 82  
83 83  (% style="color:#037691" %)**Common DC Characteristics:**
84 84  
85 -* Supply Voltage: Built-in Battery, 2.5v ~~ 3.6v
87 +* Supply Voltage: 2.5v ~~ 3.6v
86 86  * Support current: 5V 300mA, 12V 100mA
87 87  * Operating Temperature: -40 ~~ 85°C
88 88  
... ... @@ -135,10 +135,11 @@
135 135  == 1.6 Button & LEDs ==
136 136  
137 137  
138 -[[image:image-20250416151419-4.jpeg]]
140 +[[image:1675212633011-651.png||_mstalt="291538"]]
139 139  
140 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
141 -|=(% style="width: 167px;background-color:#4F81BD;color:white" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 226px;background-color:#4F81BD;color:white" %)**Action**
142 +
143 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
144 +|=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 225px;background-color:#D9E2F3;color:#0070C0" %)**Action**
142 142  |(% style="background-color:#f2f2f2; width:167px" %)Pressing ACT between 1s < time < 3s|(% style="background-color:#f2f2f2; width:117px" %)Send an uplink|(% style="background-color:#f2f2f2; width:225px" %)(((
143 143  If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.
144 144  Meanwhile, BLE module will be active and user can connect via BLE to configure device.
... ... @@ -148,7 +148,7 @@
148 148  (% style="background-color:#f2f2f2; color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
149 149  Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device join or not join LoRaWAN network.
150 150  )))
151 -|(% style="background-color:#f2f2f2; width:167px" %)Fast press ACT 5 times.|(% style="background-color:#f2f2f2; width:117px" %)Deactivate Device|(% style="background-color:#f2f2f2; width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means SDI-12-LB/LS is in Deep Sleep Mode.
154 +|(% style="background-color:#f2f2f2; width:167px" %)Fast press ACT 5 times.|(% style="background-color:#f2f2f2; width:117px" %)Deactivate Device|(% style="background-color:#f2f2f2; width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means PS-LB-NA is in Deep Sleep Mode.
152 152  
153 153  == 1.7 Pin Mapping ==
154 154  
... ... @@ -159,7 +159,7 @@
159 159  == 1.8 BLE connection ==
160 160  
161 161  
162 -SDI-12-LB/LS support BLE remote configure.
165 +SDI-12-LB support BLE remote configure.
163 163  
164 164  BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
165 165  
... ... @@ -172,24 +172,20 @@
172 172  
173 173  == 1.9 Mechanical ==
174 174  
175 -=== 1.9.1 for LB version ===
176 176  
179 +[[image:image-20230201090139-2.png||_mstalt="428623"]]
177 177  
178 -[[image:image-20250416151406-3.jpeg]]
181 +[[image:image-20230201090139-3.png||_mstalt="428987"]]
179 179  
183 +[[image:image-20230201090139-4.png||_mstalt="429351"]]
180 180  
181 -=== 1.9.2 for LS version ===
182 182  
183 -
184 -[[image:image-20250329133856-1.jpeg]]
185 -
186 -
187 187  = 2. Configure SDI-12 to connect to LoRaWAN network =
188 188  
189 189  == 2.1 How it works ==
190 190  
191 191  
192 -The SDI-12-LB/LS is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and activate the SDI-12-LB/LS. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
191 +The SDI-12-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and activate the SDI-12-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
193 193  
194 194  
195 195  == 2.2 Quick guide to connect to LoRaWAN server (OTAA) ==
... ... @@ -197,15 +197,16 @@
197 197  
198 198  Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
199 199  
200 -[[image:image-20250416151346-2.png]]
201 201  
200 +[[image:image-20230201090528-5.png||_mstalt="430300" height="465" width="1111"]]
202 202  
202 +
203 203  The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
204 204  
205 205  
206 -(% style="color:blue" %)**Step 1**(%%): Create a device in TTN with the OTAA keys from SDI-12-LB/LS.
206 +(% style="color:blue" %)**Step 1**(%%): Create a device in TTN with the OTAA keys from SDI-12-LB.
207 207  
208 -Each SDI-12-LB/LS is shipped with a sticker with the default device EUI as below:
208 +Each SDI-12-LB is shipped with a sticker with the default device EUI as below:
209 209  
210 210  [[image:image-20230426084456-1.png||height="241" width="519"]]
211 211  
... ... @@ -212,53 +212,37 @@
212 212  
213 213  You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
214 214  
215 -**Create the application.**
216 216  
217 -[[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SAC01L_LoRaWAN_Temperature%26Humidity_Sensor_User_Manual/WebHome/image-20250423093843-1.png?width=756&height=264&rev=1.1||alt="image-20250423093843-1.png"]]
216 +(% style="color:blue" %)**Register the device**
218 218  
219 -[[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LTC2-LB--LoRaWAN_Temperature_Transmitter_User_Manual/WebHome/image-20240907111305-2.png?width=1000&height=572&rev=1.1||alt="image-20240907111305-2.png"]]
218 +[[image:1675213652444-622.png||_mstalt="293657"]]
220 220  
221 221  
222 -**Add devices to the created Application.**
221 +(% style="color:blue" %)**Add APP EUI and DEV EUI**
223 223  
224 -[[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LTC2-LB--LoRaWAN_Temperature_Transmitter_User_Manual/WebHome/image-20240907111659-3.png?width=977&height=185&rev=1.1||alt="image-20240907111659-3.png"]]
225 225  
226 -[[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LTC2-LB--LoRaWAN_Temperature_Transmitter_User_Manual/WebHome/image-20240907111820-5.png?width=975&height=377&rev=1.1||alt="image-20240907111820-5.png"]]
224 +[[image:1675213661769-223.png||_mstalt="295217"]]
227 227  
228 228  
229 -**Enter end device specifics manually.**
227 +(% style="color:blue" %)**Add APP EUI in the application**
230 230  
231 -[[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LTC2-LB--LoRaWAN_Temperature_Transmitter_User_Manual/WebHome/image-20240907112136-6.png?width=697&height=687&rev=1.1||alt="image-20240907112136-6.png"]]
232 232  
230 +[[image:1675213675852-577.png||_mstalt="297947"]]
233 233  
234 -**Add DevEUI and AppKey.**
235 235  
236 -**Customize a platform ID for the device.**
233 +(% style="color:blue" %)**Add APP KEY**
237 237  
238 -[[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LTC2-LB--LoRaWAN_Temperature_Transmitter_User_Manual/WebHome/image-20240907112427-7.png?rev=1.1||alt="image-20240907112427-7.png"]]
235 +[[image:1675213686734-883.png||_mstalt="298064"]]
239 239  
240 240  
241 -(% style="color:blue" %)**Step 2: **(%%)Add decoder
238 +(% style="color:blue" %)**Step 2**(%%): Activate on SDI-12-LB
242 242  
243 -While using TTN network, you can add the payload format to decode the payload.
244 244  
245 -There is no fix payload decoder in LoRaWAN server because the SDI-12 sensors returns are different. User need to write the decoder themselves for their case.
241 +Press the button for 5 seconds to activate the SDI-12-LB.
246 246  
247 -SDI-12-LB/LS TTN Payload Decoder: [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>url:https://github.com/dragino/dragino-end-node-decoder]]
248 -
249 -Below is TTN screen shot:
250 -
251 -[[image:image-20241118165746-3.png||height="470" width="869"]]
252 -
253 -[[image:image-20241118165832-4.png||height="336" width="724"]]
254 -
255 -
256 -(% style="color:blue" %)**Step 3**(%%): Activate on SDI-12-LB/LS
257 -
258 -Press the button for 5 seconds to activate the SDI-12-LB/LS.
259 -
260 260  (% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode** (%%)for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
261 261  
245 +
262 262  [[image:1675213704414-644.png||_mstalt="293748"]]
263 263  
264 264  
... ... @@ -265,24 +265,15 @@
265 265  == ​2.3 SDI-12 Related Commands ==
266 266  
267 267  
268 -User need to configure SDI-12-LB/LS to communicate with SDI-12 sensors otherwise the uplink payload will only include a few bytes.
252 +User need to configure SDI-12-LB to communicate with SDI-12 sensors otherwise the uplink payload will only include a few bytes.
269 269  
270 -If you use UART to connect a computer, refer to the following connection methods:
271 271  
272 -[[image:image-20240823165402-1.jpeg||height="488" width="678"]]
273 -
274 -Screenshot example:
275 -
276 -[[image:image-20240823165526-2.png||height="489" width="690"]]
277 -
278 -
279 -
280 280  === 2.3.1 Basic SDI-12 debug command ===
281 281  
282 282  
283 283  User can run some basic SDI-12 command to debug the connection to the SDI-12 sensor. These commands can be sent via AT Command or LoRaWAN downlink command.
284 284  
285 -If SDI-12 sensor return value after get these commands, //SDI-12-LB/LS// will uplink the return on FPORT=100, otherwise, if there is no response from SDI-12 sensor. //SDI-12-LB/LS// will uplink NULL (0x 4E 55 4C 4C) to server.
260 +If SDI-12 sensor return value after get these commands, //SDI-12-LB// will uplink the return on FPORT=100, otherwise, if there is no response from SDI-12 sensor. //SDI-12-LB// will uplink NULL (0x 4E 55 4C 4C) to server.
286 286  
287 287  The following is the display information on the serial port and the server.
288 288  
... ... @@ -500,7 +500,7 @@
500 500  
501 501  AT+COMMANDx & AT+DATACUTx
502 502  
503 -User can define max 15 SDI-12 Commands (AT+COMMAND1 ~~ AT+COMMANDF). On each uplink period (TDC time, default 20 minutes), SDI-12-LB/LS will send these SDI-12 commands and wait for return from SDI-12 sensors. SDI-12-LB/LS will then combine these returns and uplink via LoRaWAN.
478 +User can define max 15 SDI-12 Commands (AT+COMMAND1 ~~ AT+COMMANDF). On each uplink period (TDC time, default 20 minutes), SDI-12-LB will send these SDI-12 commands and wait for return from SDI-12 sensors. SDI-12-LB will then combine these returns and uplink via LoRaWAN.
504 504  
505 505  
506 506  * (% style="color:blue" %)**AT Command:**
... ... @@ -513,7 +513,7 @@
513 513  
514 514  (% style="color:red" %)**var3**(%%): Whether to send //addrD0!// to get return after var2 timeout. 0: Don't Send //addrD0! //; 1: Send //addrD0!//.
515 515  
516 -(% style="color:red" %)**var4**(%%): validation check for return. If return invalid, SDI-12-LB/LS will resend this command. Max 3 retries.
491 +(% style="color:red" %)**var4**(%%): validation check for return. If return invalid, SDI-12-LB will resend this command. Max 3 retries.
517 517  
518 518  (% style="color:red" %)**0 **(%%) No validation check;
519 519  
... ... @@ -543,8 +543,8 @@
543 543  For example, if return from AT+COMMAND1 is “013METER   TER12 112T12-00024895<CR><LF>” , Below AT+DATACUT1 will get different result to combine payload:
544 544  
545 545  
546 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
547 -|=(% style="width: 164px;background-color:#4F81BD;color:white" %)**AT+DATACUT1 value**|=(% style="width: 346px;background-color:#4F81BD;color:white" %)**Final Result to combine Payload**
521 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
522 +|=(% style="width: 164px;background-color:#D9E2F3;color:#0070C0" %)**AT+DATACUT1 value**|=(% style="width: 344px;background-color:#D9E2F3;color:#0070C0" %)**Final Result to combine Payload**
548 548  |(% style="background-color:#f2f2f2; width:164px" %)34,1,1+2+3|(% style="background-color:#f2f2f2; width:344px" %)0D 00 01 30 31 33
549 549  |(% style="background-color:#f2f2f2; width:164px" %)34,2,1~~8+12~~16|(% style="background-color:#f2f2f2; width:344px" %)0D 00 01 30 31 33 4D 45 54 45 52 54 45 52 31 32
550 550  |(% style="background-color:#f2f2f2; width:164px" %)34,2,1~~34|(% style="background-color:#f2f2f2; width:344px" %)0D 00 01 30 31 33 4D 45 54 45 52 20 20 20 54 45 52 31 32 20 31 31 32 54 31 32 2D 30 30 30 32 34 38 39 35 0D 0A
... ... @@ -565,7 +565,7 @@
565 565  * (% style="color:#037691" %)**NN **(%%):  1: set the AT+COMMAND value ; 2: set the AT+DATACUT value.
566 566  * (% style="color:#037691" %)**LL **(%%):  The length of AT+COMMAND or AT+DATACUT command
567 567  * (% style="color:#037691" %)**XX XX XX XX **(%%): AT+COMMAND or AT+DATACUT command
568 -* (% style="color:#037691" %)**YY **(%%):  If YY=0, SDI-12-LB/LS will execute the downlink command without uplink; if YY=1, SDI-12-LB/LS will execute an uplink after got this command. 
543 +* (% style="color:#037691" %)**YY **(%%):  If YY=0, SDI-12-LB will execute the downlink command without uplink; if YY=1, SDI-12-LB will execute an uplink after got this command. 
569 569  
570 570  (% style="color:blue" %)**Example:**
571 571  
... ... @@ -586,7 +586,7 @@
586 586  Etc. AT+CMDEAR=1,10 means erase AT+COMMAND1/AT+DATACUT1 to AT+COMMAND10/AT+DATACUT10
587 587  
588 588  
589 -* (% style="color:#037691" %)**Downlink Payload:**
564 +* (% style="color:#037691" %)** Downlink Payload:**
590 590  
591 591  (% style="color:#4f81bd" %)**0x09 aa bb**(%%)  same as AT+CMDEAR=aa,bb
592 592  
... ... @@ -613,6 +613,7 @@
613 613  If AT+ALLDATAMOD=1, (% style="color:#4f81bd" %)**FX,X**(%%) will be added in the payload, FX specify which command is used and X specify the length of return. for example in above screen, F1 05 means the return is from AT+COMMAND1 and the return is 5 bytes.
614 614  
615 615  
591 +
616 616  (% style="color:blue" %)**Compose Uplink**
617 617  
618 618  (% style="color:#4f81bd" %)**AT+DATAUP=0**
... ... @@ -659,12 +659,12 @@
659 659  === 2.4.1 Device Payload, FPORT~=5 ===
660 660  
661 661  
662 -Include device configure status. Once SDI-12-LB/LS Joined the network, it will uplink this message to the server.
638 +Include device configure status. Once SDI-12-LB Joined the network, it will uplink this message to the server.
663 663  
664 -Users can also use the downlink command(0x26 01) to ask SDI-12-LB/LS to resend this uplink.
640 +Users can also use the downlink command(0x26 01) to ask SDI-12-LB to resend this uplink.
665 665  
666 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
667 -|(% colspan="6" style="background-color:#4f81bd; color:white" %)**Device Status (FPORT=5)**
642 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
643 +|(% colspan="6" style="background-color:#d9e2f3; color:#0070c0" %)**Device Status (FPORT=5)**
668 668  |(% style="background-color:#f2f2f2; width:103px" %)**Size (bytes)**|(% style="background-color:#f2f2f2; width:72px" %)**1**|(% style="background-color:#f2f2f2" %)**2**|(% style="background-color:#f2f2f2; width:91px" %)**1**|(% style="background-color:#f2f2f2; width:86px" %)**1**|(% style="background-color:#f2f2f2; width:44px" %)**2**
669 669  |(% style="background-color:#f2f2f2; width:103px" %)**Value**|(% style="background-color:#f2f2f2; width:72px" %)Sensor Model|(% style="background-color:#f2f2f2" %)Firmware Version|(% style="background-color:#f2f2f2; width:91px" %)Frequency Band|(% style="background-color:#f2f2f2; width:86px" %)Sub-band|(% style="background-color:#f2f2f2; width:44px" %)BAT
670 670  
... ... @@ -673,7 +673,7 @@
673 673  [[image:1675215946738-635.png||_mstalt="297778"]]
674 674  
675 675  
676 -(% style="color:#037691" %)**Sensor Model**(%%): For SDI-12-LB/LS, this value is 0x17
652 +(% style="color:#037691" %)**Sensor Model**(%%): For SDI-12-LB, this value is 0x17
677 677  
678 678  (% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
679 679  
... ... @@ -735,10 +735,10 @@
735 735  
736 736  * Periodically Uplink: FPORT=2
737 737  
738 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:500px" %)
739 -|=(% style="width: 90px;background-color:#4F81BD;color:white" %)(((
714 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:500px" %)
715 +|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)(((
740 740  **Size(bytes)**
741 -)))|=(% style="width: 80px;background-color:#4F81BD;color:white" %)**2**|=(% style="width: 90px;background-color:#4F81BD;color:white" %)**1**|=(% style="width: 240px;background-color:#4F81BD;color:white" %)**Length depends on the return from the commands**
717 +)))|=(% style="width: 80px;background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 240px;background-color:#D9E2F3;color:#0070C0" %)**Length depends on the return from the commands**
742 742  |(% style="width:93px" %)Value|(% style="width:83px" %)(((
743 743  Battery(mV)
744 744  &
... ... @@ -754,7 +754,7 @@
754 754  === 2.4.3 Battery Info ===
755 755  
756 756  
757 -Check the battery voltage for SDI-12-LB/LS.
733 +Check the battery voltage for SDI-12-LB.
758 758  
759 759  Ex1: 0x0B45 = 2885mV
760 760  
... ... @@ -789,13 +789,13 @@
789 789  
790 790  There is no fix payload decoder in LoRaWAN server because the SDI-12 sensors returns are different. User need to write the decoder themselves for their case.
791 791  
792 -SDI-12-LB/LS TTN Payload Decoder: [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>url:https://github.com/dragino/dragino-end-node-decoder]]
768 +SDI-12-LB TTN Payload Decoder: [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>url:https://github.com/dragino/dragino-end-node-decoder]]
793 793  
794 794  
795 795  == 2.5 Uplink Interval ==
796 796  
797 797  
798 -The SDI-12-LB/LS by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link:
774 +The SDI-12-LB by default uplink the sensor data every 20 minutes. User can change this interval by AT Command or LoRaWAN Downlink Command. See this link:
799 799  
800 800  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H4.1ChangeUplinkInterval]]
801 801  
... ... @@ -805,7 +805,7 @@
805 805  === 2.6.1 Examples 1 ~-~- General Example ===
806 806  
807 807  
808 -COM port and SDI-12 sensor communication converted to SDI-12-LB/LS and SDI-12 sensor communication.
784 +COM port and SDI-12 sensor communication converted to SDI-12-LB and SDI-12 sensor communication.
809 809  
810 810  [[image:image-20230222143809-1.png||_mstalt="429962" height="564" width="729"]]
811 811  
... ... @@ -845,27 +845,27 @@
845 845  (% style="color:#037691" %)**AT+COMMANDx=4M!,1,1,1**
846 846  
847 847  
848 -(% style="color:blue" %)**2) The AT+DATACUTx command is applied to the green arrow part, receiving and cut out data from the SDI12 sensor:**
824 +(% style="color:blue" %)**2) The AT+DATACUTx command is applied to the green arrow part, receiving and cut out data from the SDI12 sensor：**
849 849  
850 850  a. The first reply, all 34 characters: ”113TRUEBNERSMT100038220303182331<CR><LF>”
851 851  
852 852  Cut out all characters: (% _mstmutation="1" style="color:#037691" %)**AT+ALLDATAMOD=1 or AT+DATACUTx=34,2,1~~34**(% style="color:#037691" %);
853 853  
854 -b. The sixth reply, all 31 characters: "1+19210+1.04+0.00+22.49+11.75<CR><LF>"
830 +b. The sixth reply, all 31 characters：”1+19210+1.04+0.00+22.49+11.75<CR><LF>”
855 855  
856 856  Cut out all characters: (% _mstmutation="1" style="color:#037691" %)**AT+ALLDATAMOD=1 or AT+DATACUTx=31,2,1~~31**(% style="color:#037691" %);
857 857  
858 -c. The eighth reply, all 31 characters: "2+18990+1.08+0.00+22.24+11.80<CR><LF>"
834 +c. The eighth reply, all 31 characters：”2+18990+1.08+0.00+22.24+11.80<CR><LF>”
859 859  
860 860  Cut out all characters: (% _mstmutation="1" style="color:#037691" %)**AT+ALLDATAMOD=1 or AT+DATACUTx=31,2,1~~31**(% style="color:#037691" %);
861 861  
862 -d. The tenth reply, all 15 characters: "3-2919.8+24.0<CR><LF>"
838 +d. The tenth reply, all 15 characters：”3-2919.8+24.0<CR><LF>”
863 863  
864 864  Cut out all characters: (% _mstmutation="1" style="color:#037691" %)**AT+ALLDATAMOD=1 or AT+DATACUTx=15,2,1~~15**(% style="color:#037691" %);
865 865  
866 -e. The twelfth reply, all 25 characters: "4+30.8+22.84+4.7+954.38<CR><LF>"
842 +e. The twelfth reply, all 25 characters：”4+30.8+22.84+4.7+954.38<CR><LF>”
867 867  
868 -Partial cut, the cut sensor address and the first two parameters:(% style="color:#037691" %)**AT+DATACUTx=25,2,1~~12, cut out the character field "4+30.8+22.84"**.
844 +Partial cut, the cut sensor address and the first two parameters：(% style="color:#037691" %)**AT+DATACUTx=25,2,1~~12, cut out the character field ” 4+30.8+22.84”**.
869 869  
870 870  
871 871  === 2.6.2 Example 2 ~-~- Connect to Hygrovue10 ===
... ... @@ -890,13 +890,13 @@
890 890  [[image:image-20230603120209-2.png||height="281" width="267"]]
891 891  
892 892  
893 -==== 2.6.2.2 Hardware Connection to SDI-12-LB/LS ====
869 +==== 2.6.2.2 Hardware Connection to SDI-12-LB ====
894 894  
895 895  
896 896  [[image:image-20230603120515-3.png]]
897 897  
898 898  
899 -==== 2.6.2.3 Commands set in SDI-12-LB/LS and uplink payload ====
875 +==== 2.6.2.3 Commands set in SDI-12-LB and uplink payload ====
900 900  
901 901  
902 902  [[image:image-20230603120648-4.png]]
... ... @@ -931,13 +931,13 @@
931 931  [[image:image-20230603121606-7.png||height="242" width="307"]]
932 932  
933 933  
934 -==== 2.6.3.2 Hardware Connection to SDI-12-LB/LS ====
910 +==== 2.6.3.2 Hardware Connection to SDI-12-LB ====
935 935  
936 936  
937 937  [[image:image-20230603121643-8.png||height="442" width="656"]]
938 938  
939 939  
940 -==== 2.6.3.3 Commands set in SDI-12-LB/LS and uplink payload ====
916 +==== 2.6.3.3 Commands set in SDI-12-LB and uplink payload ====
941 941  
942 942  
943 943  [[image:image-20230603121721-9.png]]
... ... @@ -949,6 +949,7 @@
949 949  [[image:image-20230603121826-11.png||height="155" width="1104"]]
950 950  
951 951  
928 +
952 952  === 2.6.4 Example 4 ~-~- Connect to TEROS-12 ===
953 953  
954 954  ==== 2.6.4.1 Reference Manual and Command ====
... ... @@ -971,13 +971,13 @@
971 971  [[image:image-20230603122248-16.png||height="196" width="198"]]
972 972  
973 973  
974 -==== 2.6.4.2 Hardware Connection to SDI-12-LB/LS ====
951 +==== 2.6.4.2 Hardware Connection to SDI-12-LB ====
975 975  
976 976  
977 977  [[image:image-20230603122212-15.png||height="502" width="667"]]
978 978  
979 979  
980 -==== 2.6.4.3 Commands set in SDI-12-LB/LS and uplink payload ====
957 +==== 2.6.4.3 Commands set in SDI-12-LB and uplink payload ====
981 981  
982 982  
983 983  [[image:image-20230603122040-12.png]]
... ... @@ -1001,15 +1001,15 @@
1001 1001  
1002 1002  * The sensor needs to be powered to a steady statue. So the 12VT time need to be set to the maximum stable time for the sensors. in this example, it is 13 seconds.
1003 1003  
1004 -* If these SDI-12 sensors are powered by external power source. It will add 300uA in the total current in SDI-12-LB/LS.
981 +* If these SDI-12 sensors are powered by external power source. It will add 300uA in the total current in SDI-12-LB.
1005 1005  
1006 -==== 2.6.5.2 Hardware Connection to SDI-12-LB/LS ====
983 +==== 2.6.5.2 Hardware Connection to SDI-12-LB ====
1007 1007  
1008 1008  
1009 1009  [[image:image-20230603122508-17.png||height="526" width="742"]]
1010 1010  
1011 1011  
1012 -==== 2.6.5.3 Commands set in SDI-12-LB/LS and uplink payload ====
989 +==== 2.6.5.3 Commands set in SDI-12-LB and uplink payload ====
1013 1013  
1014 1014  
1015 1015  [[image:image-20230603122549-18.png]]
... ... @@ -1045,15 +1045,16 @@
1045 1045  [[image:image-20230627174559-3.png]]
1046 1046  
1047 1047  
1048 -==== 2.6.6.2 Hardware Connection to SDI-12-LB/LS ====
1025 +==== 2.6.6.2 Hardware Connection to SDI-12-LB ====
1049 1049  
1050 1050  
1051 1051  [[image:image-20230627174446-2.png]]
1052 1052  
1053 1053  
1054 -==== 2.6.6.3 Commands set in SDI-12-LB/LS and uplink payload ====
1055 1055  
1032 +==== 2.6.6.3 Commands set in SDI-12-LB and uplink payload ====
1056 1056  
1034 +
1057 1057  [[image:image-20230627175513-4.png||height="596" width="576"]]
1058 1058  
1059 1059  [[image:image-20230627175736-5.png||height="429" width="693"]]
... ... @@ -1064,89 +1064,10 @@
1064 1064  [[image:image-20230627180303-6.png||height="292" width="1171"]]
1065 1065  
1066 1066  
1067 -=== 2.6.7 Example 7 ~-~- Connect to GroPoint Profile-8 (SDI-12 Version) ===
1068 -
1069 -==== 2.6.7.1  Reference Manual and Command ====
1070 -
1071 -
1072 -* [[https:~~/~~/static1.squarespace.com/static/5db0b690c4990258f8f6d042/t/64189e1ab3ebc54e6947b0c0/1679334941034/2625-N-T+GroPoint+Profile+User+Manual-V1.1.3.pdf>>https://static1.squarespace.com/static/5db0b690c4990258f8f6d042/t/64189e1ab3ebc54e6947b0c0/1679334941034/2625-N-T+GroPoint+Profile+User+Manual-V1.1.3.pdf]]
1073 -
1074 -* Commands to be used in PC and output.
1075 -
1076 -1. check device address
1077 -1. change device address
1078 -1. check device ID
1079 -1. start measure
1080 -1. Get Meausre result
1081 -
1082 -[[image:image-20240423143921-1.png]]
1083 -
1084 -
1085 -==== 2.6.7.2 Hardware Connection to SDI-12-LB/LS ====
1086 -
1087 -
1088 -(% style="color:red" %)**Note: When the bytes returned by the sensor are not fixed, the full byte interception can be used: AT+ALLDATAMOD=1 (The DATACUTx parameter needs to be cleared when using this directive, or it will not work.)**
1089 -
1090 -[[image:image-20240423145522-2.png||height="345" width="400"]]
1091 -
1092 -
1093 -==== 2.6.7.3 Commands set in SDI-12-LB/LS and uplink payload ====
1094 -
1095 -[[image:image-20240423151202-3.png]]
1096 -
1097 -(% class="wikigeneratedid" id="H" %)
1098 -[[image:image-20240423162851-6.png||height="251" width="935"]]
1099 -
1100 -
1101 -DATA in TTN:
1102 -
1103 -[[image:image-20240423162322-4.png||height="269" width="933"]]
1104 -
1105 -
1106 -=== 2.6.8 Example 8 ~-~- Connect to Acclima TDR Soil Moisture Sensor ===
1107 -
1108 -==== 2.6.8.1  Reference Manual and Command ====
1109 -
1110 -
1111 -* [[Acclima TDR Soil Moisture Sensor User Manual>>url:https://acclima.com/tdr-soil-moisture-sensor-user-manual/]]
1112 -
1113 -* Commands to be used in PC and output.
1114 -
1115 -1. check device address
1116 -1. change device address
1117 -1. check device ID
1118 -1. start measure
1119 -1. Get Meausre result
1120 -
1121 -[[image:image-20240903152650-3.png]]
1122 -
1123 -[[image:image-20240903152627-2.png]]
1124 -
1125 -
1126 -==== 2.6.8.2 Hardware Connection to SDI-12-LB/LS ====
1127 -
1128 -
1129 -(% style="color:red" %)**Note: When the bytes returned by the sensor are not fixed, the full byte interception can be used: AT+ALLDATAMOD=1 (The DATACUTx parameter needs to be cleared when using this directive, or it will not work.)**
1130 -
1131 -[[image:image-20240903153004-5.png||height="358" width="660"]]
1132 -
1133 -
1134 -==== 2.6.8.3 Commands set in SDI-12-LB/LS and uplink payload ====
1135 -
1136 -
1137 -[[image:image-20240903153258-6.png]]
1138 -
1139 -[[image:image-20240903153627-7.png]]
1140 -
1141 -DATA in TTN:
1142 -
1143 -[[image:image-20240903154020-10.png||height="467" width="961"]]
1144 -
1145 -
1146 1146  == 2.7 Frequency Plans ==
1147 1147  
1148 1148  
1149 -The SDI-12-LB/LS uses OTAA mode and below frequency plans by default. Each frequency band use different firmware, user update the firmware to the corresponding band for their country.
1048 +The SDI-12-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
1150 1150  
1151 1151  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
1152 1152  
... ... @@ -1159,15 +1159,15 @@
1159 1159  [[https:~~/~~/www.dropbox.com/sh/qrbgbikb109lkiv/AACBR-v_ZhZAMengcY7Nsa1ja?dl=0>>https://www.dropbox.com/sh/qrbgbikb109lkiv/AACBR-v_ZhZAMengcY7Nsa1ja?dl=0]]
1160 1160  
1161 1161  
1162 -= 3. Configure SDI-12-LB/LS via AT Command or LoRaWAN Downlink =
1061 += 3. Configure SDI-12-LB via AT Command or LoRaWAN Downlink =
1163 1163  
1164 1164  
1165 -Use can configure SDI-12-LB/LS via AT Command or LoRaWAN Downlink.
1064 +Use can configure SDI-12-LB via AT Command or LoRaWAN Downlink.
1166 1166  
1167 1167  * AT Command Connection: See [[FAQ>>||anchor="H7.FAQ"]].
1168 1168  * LoRaWAN Downlink instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
1169 1169  
1170 -There are two kinds of commands to configure SDI-12-LB/LS, they are:
1069 +There are two kinds of commands to configure SDI-12-LB, they are:
1171 1171  
1172 1172  * (% style="color:blue" %)**General Commands**.
1173 1173  
... ... @@ -1181,9 +1181,9 @@
1181 1181  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
1182 1182  
1183 1183  
1184 -* (% style="color:blue" %)**Commands special design for SDI-12-LB/LS**
1083 +* (% style="color:blue" %)**Commands special design for SDI-12-LB**
1185 1185  
1186 -These commands only valid for SDI-12-LB/LS, as below:
1085 +These commands only valid for SDI-12-LB, as below:
1187 1187  
1188 1188  
1189 1189  == 3.1 Set Transmit Interval Time ==
... ... @@ -1193,8 +1193,8 @@
1193 1193  
1194 1194  (% style="color:blue" %)**AT Command: AT+TDC**
1195 1195  
1196 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
1197 -|=(% style="width: 160px; background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 160px; background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 190px;background-color:#4F81BD;color:white" %)**Response**
1095 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1096 +|=(% style="width: 160px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Command Example**|=(% style="width: 160px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)**Function**|=(% style="width: 190px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1198 1198  |(% style="background-color:#f2f2f2; width:157px" %)AT+TDC=?|(% style="background-color:#f2f2f2; width:166px" %)Show current transmit Interval|(% style="background-color:#f2f2f2" %)(((
1199 1199  30000
1200 1200  OK
... ... @@ -1221,8 +1221,8 @@
1221 1221  
1222 1222  (% style="color:blue" %)**AT Command: AT+INTMOD**
1223 1223  
1224 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
1225 -|=(% style="width: 154px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 196px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 160px;background-color:#4F81BD;color:white" %)**Response**
1123 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1124 +|=(% style="width: 154px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 160px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1226 1226  |(% style="background-color:#f2f2f2; width:154px" %)AT+INTMOD=?|(% style="background-color:#f2f2f2; width:196px" %)Show current interrupt mode|(% style="background-color:#f2f2f2; width:157px" %)(((
1227 1227  0
1228 1228  OK
... ... @@ -1252,8 +1252,8 @@
1252 1252  
1253 1253  (% style="color:blue" %)**AT Command: AT+3V3T**
1254 1254  
1255 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:474px" %)
1256 -|=(% style="width: 154px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 201px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 120px;background-color:#4F81BD;color:white" %)**Response**
1154 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:474px" %)
1155 +|=(% style="width: 154px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 201px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 120px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1257 1257  |(% style="background-color:#f2f2f2; width:154px" %)AT+3V3T=?|(% style="background-color:#f2f2f2; width:201px" %)Show 3V3 open time.|(% style="background-color:#f2f2f2; width:116px" %)(((
1258 1258  0
1259 1259  OK
... ... @@ -1272,7 +1272,7 @@
1272 1272  (% style="color:blue" %)**AT Command: AT+5VT**
1273 1273  
1274 1274  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:470px" %)
1275 -|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 196px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 119px;background-color:#4F81BD;color:white" %)**Response**
1174 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 119px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1276 1276  |(% style="background-color:#f2f2f2; width:155px" %)AT+5VT=?|(% style="background-color:#f2f2f2; width:196px" %)Show 5V open time.|(% style="background-color:#f2f2f2; width:114px" %)(((
1277 1277  0
1278 1278  OK
... ... @@ -1293,7 +1293,7 @@
1293 1293  (% style="color:blue" %)**(The v1.2 version is enabled for 1 second by default, and the version below v1.2 is disabled by default)**
1294 1294  
1295 1295  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:443px" %)
1296 -|=(% style="width: 156px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 199px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 89px;background-color:#4F81BD;color:white" %)**Response**
1195 +|=(% style="width: 156px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 199px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 89px;background-color:#D9E2F3;color:#0070C0" %)**Response**
1297 1297  |(% style="background-color:#f2f2f2; width:156px" %)AT+12VT=?|(% style="background-color:#f2f2f2; width:199px" %)Show 12V open time.|(% style="background-color:#f2f2f2; width:83px" %)(((
1298 1298  0
1299 1299  OK
... ... @@ -1323,8 +1323,8 @@
1323 1323  
1324 1324  (% style="color:blue" %)**AT Command: AT+ALLDATAMOD**
1325 1325  
1326 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:437px" %)
1327 -|=(% style="background-color:#4F81BD;color:white" %)**Command Example**|=(% style="background-color:#4F81BD;color:white" %)**Function**|=(% style="background-color:#4F81BD;color:white" %)**Response**
1225 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:437px" %)
1226 +|=(% style="background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="background-color:#D9E2F3;color:#0070C0" %)**Response**
1328 1328  |(% style="background-color:#f2f2f2" %)AT+ALLDATAMOD=?|(% style="background-color:#f2f2f2" %)Show current all data mode|(% style="background-color:#f2f2f2" %)(((
1329 1329  0
1330 1330  OK
... ... @@ -1345,8 +1345,8 @@
1345 1345  
1346 1346  (% style="color:blue" %)**AT Command: AT+DATAUP**
1347 1347  
1348 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
1349 -|=(% style="width: 154px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 266px;background-color:#4F81BD;color:white" %)**Function**|=(% style="background-color:#4F81BD;color:white" %)**Response**
1247 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
1248 +|=(% style="width: 154px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 266px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="background-color:#D9E2F3;color:#0070C0" %)**Response**
1350 1350  |(% style="background-color:#f2f2f2; width:154px" %)AT+DATAUP =?|(% style="background-color:#f2f2f2; width:266px" %)Show current splicing payload for uplink mode|(% style="background-color:#f2f2f2" %)(((
1351 1351  0
1352 1352  OK
... ... @@ -1379,8 +1379,8 @@
1379 1379  
1380 1380  (% style="color:blue" %)**AT Command: AT+PAYVER**
1381 1381  
1382 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:437px" %)
1383 -|=(% style="width: 158px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 192px;background-color:#4F81BD;color:white" %)**Function**|=(% style="background-color:#4F81BD;color:white" %)**Response**
1281 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:437px" %)
1282 +|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 192px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="background-color:#D9E2F3;color:#0070C0" %)**Response**
1384 1384  |(% style="background-color:#f2f2f2; width:158px" %)AT+PAYVER=?|(% style="background-color:#f2f2f2; width:192px" %)Show current payload version|(% style="background-color:#f2f2f2" %)(((
1385 1385  1
1386 1386  OK
... ... @@ -1397,7 +1397,7 @@
1397 1397  = 4. Battery & Power Consumption =
1398 1398  
1399 1399  
1400 -SDI-12-LB use ER26500 + SPC1520 battery pack and SDI-12-LS use 3000mAh Recharable Battery with Solar Panel. See below link for detail information about the battery info and how to replace.
1299 +SDI-12-LB uses ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
1401 1401  
1402 1402  [[**Battery Info & Power Consumption Analyze**>>url:http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
1403 1403  
... ... @@ -1443,35 +1443,11 @@
1443 1443  When downloading the images, choose the required image file for download. ​
1444 1444  
1445 1445  
1446 -== 7.4 Why is the data uploaded to the LoRaWAN platform node empty and fProt~=0? ==
1447 -
1448 -
1449 -This is due to The length of bytes sent by the node is limited by the lorawan protocol, and the fixed DR needs to be adjusted to improve this problem.
1450 -
1451 -Please refer to the following link for the number of bytes limited by different frequencies and different DRs in the lorawan protocol
1452 -
1453 -[[lora-alliance.org/wp-content/uploads/2021/05/RP002-1.0.3-FINAL-1.pdf>>url:https://lora-alliance.org/wp-content/uploads/2021/05/RP002-1.0.3-FINAL-1.pdf]]
1454 -
1455 -Example:
1456 -
1457 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/RS485-LN%20%E2%80%93%20RS485%20to%20LoRaWAN%20Converter/WebHome/image-20240620145456-1.png?rev=1.1||alt="image-20240620145456-1.png"]]
1458 -
1459 -Please refer to the following command to fix DR
1460 -
1461 -AT+ADR=0
1462 -
1463 -AT+DR=3
1464 -
1465 -Downlink command:
1466 -
1467 -[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H7.4DataRate>>url:http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#H7.4DataRate]]
1468 -
1469 -
1470 1470  = 8. ​Order Info =
1471 1471  
1472 1472  
1473 1473  (((
1474 -**Part Number: (% style="color:blue" %)SDI-12-LB-XX-YY(%%) or (% style="color:blue" %)SDI-12-LS-XX-YY(%%)**
1349 +(% style="color:blue" %)**Part Number: SDI-12-LB-XX-YY**
1475 1475  )))
1476 1476  
1477 1477  (((
... ... @@ -1499,7 +1499,7 @@
1499 1499  
1500 1500  (% style="color:#037691" %)**Package Includes**:
1501 1501  
1502 -* SDI-12-LB or SDI-12-LS SDI-12 to LoRaWAN Converter x 1
1377 +* SDI-12-LB SDI-12 to LoRaWAN Converter x 1
1503 1503  
1504 1504  (% style="color:#037691" %)**Dimension and weight**:
1505 1505  
image-20240423143921-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.kai
Size
... ... @@ -1,1 +1,0 @@
1 -43.8 KB
Content
image-20240423145522-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.kai
Size
... ... @@ -1,1 +1,0 @@
1 -709.9 KB
Content
image-20240423151202-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.kai
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20240423162322-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.kai
Size
... ... @@ -1,1 +1,0 @@
1 -87.5 KB
Content
image-20240423162811-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.kai
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20240423162851-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.kai
Size
... ... @@ -1,1 +1,0 @@
1 -45.6 KB
Content
image-20240823165402-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.ting
Size
... ... @@ -1,1 +1,0 @@
1 -580.7 KB
Content
image-20240823165526-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.ting
Size
... ... @@ -1,1 +1,0 @@
1 -63.0 KB
Content
image-20240903152517-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -11.5 KB
Content
image-20240903152627-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -36.2 KB
Content
image-20240903152650-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -22.7 KB
Content
image-20240903152742-4.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -5.2 MB
Content
image-20240903153004-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -1.1 MB
Content
image-20240903153258-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -22.4 KB
Content
image-20240903153627-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -21.2 KB
Content
image-20240903153727-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -102.0 KB
Content
image-20240903153854-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -214.8 KB
Content
image-20240903154020-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Bei
Size
... ... @@ -1,1 +1,0 @@
1 -100.9 KB
Content
image-20241118164859-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.ting
Size
... ... @@ -1,1 +1,0 @@
1 -51.6 KB
Content
image-20241118165221-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.ting
Size
... ... @@ -1,1 +1,0 @@
1 -37.2 KB
Content
image-20241118165746-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.ting
Size
... ... @@ -1,1 +1,0 @@
1 -89.4 KB
Content
image-20241118165832-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.ting
Size
... ... @@ -1,1 +1,0 @@
1 -27.2 KB
Content
image-20250329133856-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -31.2 KB
Content
image-20250329133946-2.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -29.6 KB
Content
image-20250329134001-3.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -59.0 KB
Content
image-20250416150535-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -47.6 KB
Content
image-20250416151346-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -79.6 KB
Content
image-20250416151406-3.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -44.8 KB
Content
image-20250416151419-4.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -47.6 KB
Content
image-20250416154628-5.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -40.4 KB
Content
image-20250416154700-6.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -65.6 KB
Content
image-20250416154716-7.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -50.8 KB
Content