LS -- LoRaWAN Outdoor Temperature & Humidity Sensor User Manual

Version 82.1 by Xiaoling on 2025/03/28 17:32

version	line-number	content
73.2	1	(% style="display:none" %) (%%) (% style="display:none" %) (%%) (% style="display:none" %)
1.1	2
73.2	3	(% style="text-align:center" %)
	4	[[image:image-20240104162316-6.png]]
1.1	5
73.2	6
	7
	8
	9
	10
	11
76.5	12	Table of Contents:
30.1	13
1.1	14	{{toc/}}
	15
	16
	17
	18
	19
	20
31.1	21	= 1. Introduction =
1.1	22
73.3	23	== 1.1 What is S31x-LB/LS LoRaWAN Temperature & Humidity Sensor ==
1.1	24
39.6	25
73.3	26	The Dragino S31x-LB/LS is a (% style="color:blue" %)LoRaWAN Temperature and Humidity Sensor(%%) for Internet of Things solution. It is used to measure the (% style="color:blue" %)surrounding environment temperature and relative air humidity precisely(%%), and then upload to IoT server via LoRaWAN wireless protocol.
1.1	27
73.3	28	The temperature & humidity sensor used in S31x-LB/LS is SHT31, which is fully calibrated, linearized, and temperature compensated digital output from Sensirion, it provides a strong reliability and long-term stability. The SHT31 is fixed in a (% style="color:blue" %)waterproof anti-condensation casing(%%) for long term use.
1.1	29
73.3	30	The LoRa wireless technology used in S31x-LB/LS allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
1.1	31
73.3	32	S31x-LB/LS supports (% style="color:blue" %)Temperature & Humdity alarm feature(%%), user can set temperature alarm for instant notice. S31x-LB/LS supports Datalog feature, it can save the data when there is no LoRaWAN network and uplink when network recover.
1.1	33
73.3	34	S31x-LB/LS (% style="color:blue" %)supports BLE configure(%%) and (% style="color:blue" %)wireless OTA update(%%) which make user easy to use.
1.1	35
77.1	36	S31x-LB/LS is powered by (% style="color:blue" %)8500mAh Li-SOCI2 battery(%%) or (% style="color:blue" %)solar powered + Li-ion battery(%%) it is designed for long term use up to 5 years.
1.1	37
73.3	38	Each S31x-LB/LS is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
1.1	39
	40
	41	== 1.2 Features ==
	42
39.6	43
1.1	44	* LoRaWAN 1.0.3 Class A
	45	* Ultra-low power consumption
5.1	46	* External 3 meters SHT31 probe (For S31-LB)
67.2	47	* Measure range -40°C ~~ 80°C
5.1	48	* Temperature & Humidity alarm
1.1	49	* Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
	50	* Support Bluetooth v5.1 and LoRaWAN remote configure
	51	* Support wireless OTA update firmware
	52	* Uplink on periodically
	53	* Downlink to change configure
76.12	54	* 8500mAh Li/SOCl2 Battery (S31/S31B-LB)
77.1	55	* Solar panel + 3000mAh Li-ion battery (S31/S31B-LS)
1.1	56
	57	== 1.3 Specification ==
	58
	59
	60	(% style="color:#037691" %)Common DC Characteristics:
	61
73.4	62	* Supply Voltage: Built-in Battery , 2.5v ~~ 3.6v
1.1	63	* Operating Temperature: -40 ~~ 85°C
	64
	65	(% style="color:#037691" %)Temperature Sensor:
	66
5.1	67	* Range: -40 to + 80°C
	68	* Accuracy: ±0.2 @ 0-90 °C
	69	* Resolution: 0.1°C
	70	* Long Term Shift: <0.03 °C/yr
1.1	71
5.1	72	(% style="color:#037691" %)Humidity Sensor:
	73
	74	* Range: 0 ~~ 99.9% RH
	75	* Accuracy: ± 2%RH ( 0 ~~ 100%RH)
	76	* Resolution: 0.01% RH
	77	* Long Term Shift: <0.25 %RH/yr
	78
1.1	79	(% style="color:#037691" %)LoRa Spec:
	80
	81	* Frequency Range, Band 1 (HF): 862 ~~ 1020 Mhz
	82	* Max +22 dBm constant RF output vs.
	83	* RX sensitivity: down to -139 dBm.
	84	* Excellent blocking immunity
	85
	86	(% style="color:#037691" %)Battery:
	87
	88	* Li/SOCI2 un-chargeable battery
	89	* Capacity: 8500mAh
	90	* Self-Discharge: <1% / Year @ 25°C
	91	* Max continuously current: 130mA
	92	* Max boost current: 2A, 1 second
	93
	94	(% style="color:#037691" %)Power Consumption
	95
	96	* Sleep Mode: 5uA @ 3.3v
	97	* LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
	98
	99	== 1.4 Sleep mode and working mode ==
	100
	101
	102	(% style="color:blue" %)Deep Sleep Mode: (%%)Sensor doesn't have any LoRaWAN activate. This mode is used for storage and shipping to save battery life.
	103
	104	(% style="color:blue" %)Working Mode: (%%)In this mode, Sensor will work as LoRaWAN Sensor to Join LoRaWAN network and send out sensor data to server. Between each sampling/tx/rx periodically, sensor will be in IDLE mode), in IDLE mode, sensor has the same power consumption as Deep Sleep mode.
	105
	106
	107	== 1.5 Button & LEDs ==
	108
	109
73.6	110	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/RS485-LB_Waterproof_RS485UART_to_LoRaWAN_Converter/WebHome/image-20240103160425-4.png?rev=1.1\|\|alt="image-20240103160425-4.png"]]
1.1	111
76.13	112	(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
	113	\|=(% style="width: 167px;background-color:#4F81BD;color:white" %)Behavior on ACT\|=(% style="width: 117px;background-color:#4F81BD;color:white" %)Function\|=(% style="width: 226px;background-color:#4F81BD;color:white" %)Action
1.1	114	\|(% style="width:167px" %)Pressing ACT between 1s < time < 3s\|(% style="width:117px" %)Send an uplink\|(% style="width:225px" %)(((
	115	If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, (% style="color:blue" %)blue led (%%)will blink once.
	116	Meanwhile, BLE module will be active and user can connect via BLE to configure device.
	117	)))
	118	\|(% style="width:167px" %)Pressing ACT for more than 3s\|(% style="width:117px" %)Active Device\|(% style="width:225px" %)(((
	119	(% style="color:green" %)Green led(%%) will fast blink 5 times, device will enter (% style="color:#037691" %)OTA mode(%%) for 3 seconds. And then start to JOIN LoRaWAN network.
	120	(% style="color:green" %)Green led(%%) will solidly turn on for 5 seconds after joined in network.
	121	Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device join or not join LoRaWAN network.
	122	)))
6.1	123	\|(% style="width:167px" %)Fast press ACT 5 times.\|(% style="width:117px" %)Deactivate Device\|(% style="width:225px" %)(% style="color:red" %)Red led(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
1.1	124
	125	== 1.6 BLE connection ==
	126
	127
73.4	128	S31x-LB/LS support BLE remote configure.
1.1	129
	130
	131	BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
	132
	133	* Press button to send an uplink
	134	* Press button to active device.
	135	* Device Power on or reset.
	136
	137	If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
	138
	139
43.1	140	== 1.7 Pin Definitions ==
1.1	141
	142
43.1	143
77.1	144	[[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/image-20240926134323-1.png?rev=1.1\|\|alt="image-20240926134323-1.png"]]
	145
	146
45.2	147	== 1.8 Hardware Variant ==
43.1	148
	149
76.13	150	(% border="1" cellspacing="3" style="width:460px" %)
76.2	151	\|=(% style="width: 102px;background-color:#4F81BD;color:white" %)Model\|=(% style="width: 182px; background-color:#4F81BD;color:white" %)Photo\|=(% style="width: 176px; background-color:#4F81BD;color:white" %)Probe Info
44.1	152	\|(% style="width:102px" %)(((
73.6	153	S31-LB/LS
76.7	154	)))\|(% style="width:182px" %)(((
	155	(% style="text-align:center" %)
	156	[[image:image-20240104165223-7.png]]
	157	)))\|(% style="width:176px" %)(((
6.1	158	1 x SHT31 Probe
1.1	159
	160	Cable Length : 2 meters
	161
	162
	163	)))
44.1	164	\|(% style="width:102px" %)(((
73.6	165	S31B-LB/LS
76.7	166	)))\|(% style="width:182px" %)(((
	167	(% style="text-align:center" %)
	168	[[image:image-20240104165338-9.png]]
	169	)))\|(% style="width:176px" %)(((
6.1	170	1 x SHT31 Probe
1.1	171
6.1	172	Installed in device.
1.1	173	)))
	174
	175	(% style="display:none" %)
	176
	177
	178
43.1	179	== 1.9 Mechanical ==
1.1	180
73.6	181	=== 1.9.1 for LB version ===
1.1	182
6.1	183	[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
1.1	184
	185
6.1	186	[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143899218-599.png]]
1.1	187
	188
6.1	189	[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
1.1	190
	191
73.6	192	=== 1.9.2 for LS version ===
	193
	194
	195	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SN50v3-LB/WebHome/image-20231231203439-3.png?width=886&height=385&rev=1.1\|\|alt="image-20231231203439-3.png"]]
	196
	197
73.4	198	= 2. Configure S31x-LB/LS to connect to LoRaWAN network =
1.1	199
	200	== 2.1 How it works ==
	201
	202
73.4	203	The S31x-LB/LS is configured as (% style="color:#037691" %)LoRaWAN OTAA Class A(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the S31x-LB/LS. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
1.1	204
	205
	206	== 2.2 Quick guide to connect to LoRaWAN server (OTAA) ==
	207
	208
	209	Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
	210
	211	The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
	212
	213
73.4	214	(% style="color:blue" %)Step 1:(%%) Create a device in TTN with the OTAA keys from S31x-LB/LS.
1.1	215
73.4	216	Each S31x-LB/LS is shipped with a sticker with the default device EUI as below:
1.1	217
30.1	218	[[image:image-20230426084152-1.png\|\|alt="图片-20230426084152-1.png" height="233" width="502"]]
1.1	219
	220
	221	You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
	222
	223
	224	(% style="color:blue" %)Register the device
	225
14.13	226	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/1654935135620-998.png?rev=1.1\|\|alt="1654935135620-998.png"]]
1.1	227
	228
	229	(% style="color:blue" %)Add APP EUI and DEV EUI
	230
30.1	231	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-4.png?width=753&height=551&rev=1.1\|\|alt="图片-20220611161308-4.png"]]
1.1	232
	233
	234	(% style="color:blue" %)Add APP EUI in the application
	235
	236
30.1	237	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-5.png?width=742&height=601&rev=1.1\|\|alt="图片-20220611161308-5.png"]]
1.1	238
	239
	240	(% style="color:blue" %)Add APP KEY
	241
30.1	242	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1\|\|alt="图片-20220611161308-6.png"]]
1.1	243
73.4	244	(% style="color:blue" %)Step 2:(%%) Activate on S31x-LB/LS
1.1	245
73.4	246	Press the button for 5 seconds to activate the S31x-LB/LS.
6.1	247
1.1	248	(% style="color:green" %)Green led(%%) will fast blink 5 times, device will enter (% style="color:blue" %)OTA mode(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)Green led(%%) will solidly turn on for 5 seconds after joined in network.
	249
	250	After join success, it will start to upload messages to TTN and you can see the messages in the panel.
	251
	252
	253	== 2.3 Uplink Payload ==
	254
	255	=== 2.3.1 Device Status, FPORT~=5 ===
	256
	257
73.4	258	Users can use the downlink command(0x26 01) to ask S31x-LB/LS to send device configure detail, include device configure status. S31x-LB/LS will uplink a payload via FPort=5 to server.
1.1	259
	260	The Payload format is as below.
	261
76.14	262	(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
76.4	263	\|(% colspan="6" style="background-color:#4f81bd; color:white" %)Device Status (FPORT=5)
1.1	264	\|(% style="width:103px" %)Size (bytes)\|(% style="width:72px" %)1\|2\|(% style="width:91px" %)1\|(% style="width:86px" %)1\|(% style="width:44px" %)2
76.4	265	\|(% style="width:103px" %)Value\|(% style="width:72px" %)Sensor Model\|Firmware Version\|(% style="width:91px" %)Frequency Band\|(% style="width:86px" %)Sub-band\|(% style="width:44px" %)BAT
1.1	266
	267	Example parse in TTNv3
	268
58.2	269	[[image:image-20230524144422-1.png\|\|height="174" width="1080"]]
1.1	270
	271
73.4	272	(% style="color:#037691" %)Sensor Model(%%): For S31x-LB/LS, this value is 0x0A
1.1	273
	274	(% style="color:#037691" %)Firmware Version(%%): 0x0100, Means: v1.0.0 version
	275
	276	(% style="color:#037691" %)Frequency Band:
	277
64.2	278	0x01: EU868
1.1	279
64.2	280	0x02: US915
1.1	281
64.2	282	0x03: IN865
1.1	283
64.2	284	0x04: AU915
1.1	285
64.2	286	0x05: KZ865
1.1	287
64.2	288	0x06: RU864
1.1	289
64.2	290	0x07: AS923
1.1	291
64.2	292	0x08: AS923-1
1.1	293
64.2	294	0x09: AS923-2
1.1	295
64.2	296	0x0a: AS923-3
1.1	297
64.2	298	0x0b: CN470
1.1	299
64.2	300	0x0c: EU433
1.1	301
64.2	302	0x0d: KR920
1.1	303
64.2	304	0x0e: MA869
1.1	305
	306
	307	(% style="color:#037691" %)Sub-Band:
	308
	309	AU915 and US915:value 0x00 ~~ 0x08
	310
	311	CN470: value 0x0B ~~ 0x0C
	312
	313	Other Bands: Always 0x00
	314
	315
	316	(% style="color:#037691" %)Battery Info:
	317
	318	Check the battery voltage.
	319
	320	Ex1: 0x0B45 = 2885mV
	321
	322	Ex2: 0x0B49 = 2889mV
	323
	324
	325	=== 2.3.2 Sensor Data. FPORT~=2 ===
	326
	327
7.1	328	Sensor Data is uplink via FPORT=2
1.1	329
76.14	330	(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:500px" %)
76.2	331	\|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
7.1	332	Size(bytes)
76.2	333	)))\|=(% style="width: 40px;background-color:#4F81BD;color:white" %)2\|=(% style="width: 90px;background-color:#4F81BD;color:white" %)4\|=(% style="width: 150px; background-color: #4F81BD;color:white" %)1\|=(% style="width: 80px; background-color: #4F81BD;color:white" %)2\|=(% style="width: 80px; background-color: #4F81BD;color:white" %)2
60.8	334	\|(% style="width:99px" %)Value\|(% style="width:69px" %)(((
55.5	335	Battery
14.15	336	)))\|(% style="width:130px" %)(((
55.5	337	Unix TimeStamp
46.1	338	)))\|(% style="width:194px" %)(((
60.3	339	Alarm Flag & MOD& Level of PA8
46.1	340	)))\|(% style="width:106px" %)(((
55.5	341	Temperature
46.1	342	)))\|(% style="width:97px" %)(((
55.5	343	Humidity
7.1	344	)))
1.1	345
58.2	346	[[image:image-20230524144456-2.png\|\|height="180" width="1142"]]
58.1	347
	348
51.1	349	==== (% style="color:#4472c4" %)Battery(%%) ====
1.1	350
	351	Sensor Battery Level.
	352
	353	Ex1: 0x0B45 = 2885mV
	354
	355	Ex2: 0x0B49 = 2889mV
	356
	357
51.1	358	==== (% style="color:#4472c4" %)Temperature(%%) ====
1.1	359
	360	Example:
	361
	362	If payload is: 0105H: (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
	363
	364	If payload is: FF3FH : (FF3F & 8000 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
	365
76.16	366	(FF3F & 8000:Judge whether the highest bit is 1, when the highest bit is 1, it is negative)
1.1	367
	368
51.1	369	==== (% style="color:#4472c4" %)Humidity(%%) ====
1.1	370
7.1	371	Read:0x(0197)=412 Value: 412 / 10=41.2, So 41.2%
1.1	372
	373
55.1	374	==== (% style="color:#4472c4" %)Alarm Flag & MOD & Level of PA8(%%) ====
1.1	375
	376	Example:
	377
46.1	378	If payload & 0x01 = 0x01 ~-~-> This is an Alarm Message.It means that the temperature and humidity exceed the alarm value or trigger an interrupt.
1.1	379
46.1	380	If payload & 0x01 = 0x00 ~-~-> This is a normal uplink message, no alarm.
1.1	381
46.1	382	If payload & 0x80>>7 = 0x01 ~-~-> The PA8 is low level.
1.1	383
46.1	384	If payload & 0x80>>7 =0x00 ~-~-> The PA8 is high level.
	385
	386	If payload >> 2 = 0x00 ~-~-> means MOD=1, This is a sampling uplink message.
	387
8.1	388	If payload >> 2 = 0x31 ~-~-> means MOD=31, this message is a reply message for polling, this message contains the alarm settings. see [[this link>>path:#HPolltheAlarmsettings:]] for detail.
1.1	389
	390
	391	== 2.4 Payload Decoder file ==
	392
14.22	393
10.1	394	In TTN, use can add a custom payload so it shows friendly reading
1.1	395
10.1	396	In the page (% style="color:#037691" %)Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder(%%) to add the decoder from:
1.1	397
40.1	398	[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/S31-LB%26S31B-LB>>https://github.com/dragino/dragino-end-node-decoder/tree/main/S31-LB%26S31B-LB]]
1.1	399
10.1	400
1.1	401	== 2.5 Datalog Feature ==
	402
	403
73.4	404	Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, S31x-LB/LS will store the reading for future retrieving purposes.
1.1	405
	406
	407	=== 2.5.1 Ways to get datalog via LoRaWAN ===
	408
	409
76.10	410	Set PNACKMD=1, S31x-LB/LS will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB/LS will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
1.1	411
44.1	412	* (((
73.4	413	a) S31x-LB/LS will do an ACK check for data records sending to make sure every data arrive server.
44.1	414	)))
	415	* (((
73.4	416	b) S31x-LB/LS will send data in CONFIRMED Mode when PNACKMD=1, but S31x-LB/LS won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB/LS gets a ACK, S31x-LB/LS will consider there is a network connection and resend all NONE-ACK messages.
44.1	417	)))
1.1	418
	419	=== 2.5.2 Unix TimeStamp ===
	420
	421
73.4	422	S31x-LB/LS uses Unix TimeStamp format based on
1.1	423
30.1	424	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1\|\|alt="图片-20220523001219-11.png" height="97" width="627"]]
1.1	425
	426	User can get this time from link: [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
	427
	428	Below is the converter example
	429
30.1	430	[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1\|\|alt="图片-20220523001219-12.png" height="298" width="720"]]
1.1	431
39.5	432
1.1	433	So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
	434
	435
	436	=== 2.5.3 Set Device Time ===
	437
	438
14.24	439	User need to set (% style="color:blue" %)SYNCMOD=1(%%) to enable sync time via MAC command.
1.1	440
73.4	441	Once S31x-LB/LS Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to S31x-LB/LS. If S31x-LB/LS fails to get the time from the server, S31x-LB/LS will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
1.1	442
14.24	443	(% style="color:red" %)Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.
1.1	444
	445
11.1	446	=== 2.5.4 Datalog Uplink payload (FPORT~=3) ===
1.1	447
	448
11.1	449	The Datalog uplinks will use below payload format.
1.1	450
	451	Retrieval data payload:
	452
76.15	453	(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:500px" %)
76.2	454	\|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
1.1	455	Size(bytes)
76.2	456	)))\|=(% style="width: 40px; background-color:#4F81BD;color:white" %)2\|=(% style="width: 55px; background-color:#4F81BD;color:white" %)2\|=(% style="width: 65px; background-color:#4F81BD;color:white" %)2\|=(% style="width: 180px; background-color:#4F81BD;color:white" %)1\|=(% style="width: 100px; background-color:#4F81BD;color:white" %)4
60.13	457	\|(% style="width:103px" %)Value\|(% style="width:68px" %)(((
46.1	458	ignore
	459	)))\|(% style="width:104px" %)(((
55.1	460	(((
	461	Humidity
	462	)))
	463	)))\|(% style="width:87px" %)(((
46.1	464	Temperature
55.1	465	)))\|(% style="width:178px" %)(((
60.10	466	Poll message flag & Alarm Flag& Level of PA8
46.1	467	)))\|(% style="width:137px" %)Unix Time Stamp
	468
55.1	469	Poll message flag & Alarm Flag & Level of PA8:
46.1	470
55.1	471	[[image:image-20230524114302-1.png\|\|height="115" width="736"]]
1.1	472
55.1	473
14.25	474	No ACK Message: 1: This message means this payload is fromn Uplink Message which doesn't get ACK from the server before ( for PNACKMD=1 feature)
1.1	475
	476	Poll Message Flag: 1: This message is a poll message reply.
	477
	478	* Poll Message Flag is set to 1.
	479
	480	* Each data entry is 11 bytes, to save airtime and battery, devices will send max bytes according to the current DR and Frequency bands.
	481
	482	For example, in US915 band, the max payload for different DR is:
	483
	484	a) DR0: max is 11 bytes so one entry of data
	485
	486	b) DR1: max is 53 bytes so devices will upload 4 entries of data (total 44 bytes)
	487
	488	c) DR2: total payload includes 11 entries of data
	489
	490	d) DR3: total payload includes 22 entries of data.
	491
	492	If devise doesn't have any data in the polling time. Device will uplink 11 bytes of 0
	493
	494	Example:
	495
73.4	496	If S31x-LB/LS has below data inside Flash:
1.1	497
55.1	498	[[image:image-20230524114654-2.png]]
1.1	499
	500
55.1	501	If user sends below downlink command: 31646D84E1646D856C05
1.1	502
55.1	503	Where : Start time: 646D84E1 = time 23/5/24 03:30:41
1.1	504
55.1	505	Stop time: 646D856C= time 23/5/24 03:33:00
14.26	506
55.1	507
73.4	508	S31x-LB/LS will uplink this payload.
1.1	509
58.2	510	[[image:image-20230524114826-3.png\|\|height="448" width="1244"]]
1.1	511
14.44	512	(((
55.1	513	00 00 02 36 01 10 40 64 6D 84 E1 00 00 02 37 01 10 40 64 6D 84 F8 00 00 02 37 01 0F 40 64 6D 85 04 00 00 02 3A 01 0F 40 64 6D 85 18 00 00 02 3C 01 0F 40 64 6D 85 36 00 00 02 3D 01 0E 40 64 6D 85 3F 00 00 02 3F 01 0E 40 64 6D 85 60 00 00 02 40 01 0E 40 64 6D 85 6A
14.44	514	)))
1.1	515
14.44	516	(((
1.1	517	Where the first 11 bytes is for the first entry:
14.44	518	)))
1.1	519
14.44	520	(((
55.1	521	00 00 02 36 01 10 40 64 6D 84 E1
14.44	522	)))
1.1	523
14.44	524	(((
55.1	525	Hum=0x0236/10=56.6
14.44	526	)))
1.1	527
14.44	528	(((
55.1	529	Temp=0x0110/10=27.2
14.44	530	)))
1.1	531
14.44	532	(((
55.1	533	poll message flag & Alarm Flag & Level of PA8=0x40,means reply data,sampling uplink message,the PA8 is low level.
14.44	534	)))
1.1	535
14.44	536	(((
55.1	537	Unix time is 0x646D84E1=1684899041s=23/5/24 03:30:41
14.44	538	)))
1.1	539
	540
30.1	541	(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==\|\|alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==\|\|alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==\|\|alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==\|\|alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的
1.1	542
	543	== 2.6 Temperature Alarm Feature ==
	544
	545
73.4	546	S31x-LB/LS work flow with Alarm feature.
1.1	547
	548
51.1	549	[[image:image-20230524110125-3.png\|\|height="768" width="1115"]]
1.1	550
	551
51.1	552
1.1	553	== 2.7 Frequency Plans ==
	554
	555
76.9	556	The S31x-LB/LS uses OTAA mode and below frequency plans by default. Each frequency band use different firmware, user update the firmware to the corresponding band for their country.
1.1	557
	558	[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
	559
	560
60.19	561	== 2.8 Firmware Change Log ==
	562
	563
	564	Firmware download link: [[https:~~/~~/www.dropbox.com/sh/fis3g6nmhv0eokg/AAC6BcCZaX4BdqZkduUvZ3jIa?dl=0>>https://www.dropbox.com/sh/fis3g6nmhv0eokg/AAC6BcCZaX4BdqZkduUvZ3jIa?dl=0]]
	565
	566
73.4	567	= 3. Configure S31x-LB/LS =
1.1	568
16.4	569	== 3.1 Configure Methods ==
1.1	570
	571
73.4	572	S31x-LB/LS supports below configure method:
1.1	573
	574	* AT Command via Bluetooth Connection (Recommended): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
11.1	575	* AT Command via UART Connection : See [[UART Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
1.1	576	* LoRaWAN Downlink. Instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
	577
	578	== 3.2 General Commands ==
	579
	580
	581	These commands are to configure:
	582
	583	* General system settings like: uplink interval.
	584	* LoRaWAN protocol & radio related command.
	585
	586	They are same for all Dragino Devices which support DLWS-005 LoRaWAN Stack. These commands can be found on the wiki:
	587
	588	[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
	589
	590
73.4	591	== 3.3 Commands special design for S31x-LB/LS ==
1.1	592
	593
73.4	594	These commands only valid for S31x-LB/LS, as below:
1.1	595
	596
	597	=== 3.3.1 Set Transmit Interval Time ===
	598
	599
	600	Feature: Change LoRaWAN End Node Transmit Interval.
	601
	602	(% style="color:blue" %)AT Command: AT+TDC
	603
76.15	604	(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
76.2	605	\|=(% style="width: 156px;background-color:#4F81BD;color:white" %)Command Example\|=(% style="width: 137px;background-color:#4F81BD;color:white" %)Function\|=(% style="background-color:#4F81BD;color:white" %)Response
1.1	606	\|(% style="width:156px" %)AT+TDC=?\|(% style="width:137px" %)Show current transmit Interval\|(((
	607	30000
	608	OK
	609	the interval is 30000ms = 30s
	610	)))
	611	\|(% style="width:156px" %)AT+TDC=60000\|(% style="width:137px" %)Set Transmit Interval\|(((
	612	OK
	613	Set transmit interval to 60000ms = 60 seconds
	614	)))
	615
	616	(% style="color:blue" %)Downlink Command: 0x01
	617
	618	Format: Command Code (0x01) followed by 3 bytes time value.
	619
	620	If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
	621
	622	* Example 1: Downlink Payload: 0100001E ~/~/ Set Transmit Interval (TDC) = 30 seconds
	623	* Example 2: Downlink Payload: 0100003C ~/~/ Set Transmit Interval (TDC) = 60 seconds
	624
	625	=== 3.3.2 Get Device Status ===
	626
	627
	628	Send a LoRaWAN downlink to ask device send Alarm settings.
	629
14.31	630	(% style="color:blue" %)Downlink Payload: (%%)0x26 01
1.1	631
	632	Sensor will upload Device Status via FPORT=5. See payload section for detail.
	633
	634
16.4	635	=== 3.3.3 Set Temperature Alarm Threshold ===
1.1	636
39.6	637
14.34	638	* (% style="color:blue" %)AT Command:
1.1	639
14.34	640	(% style="color:#037691" %)AT+SHTEMP=min,max
1.1	641
11.1	642	* When min=0, and max≠0, Alarm higher than max
	643	* When min≠0, and max=0, Alarm lower than min
	644	* When min≠0 and max≠0, Alarm higher than max or lower than min
1.1	645
11.1	646	Example:
1.1	647
11.1	648	AT+SHTEMP=0,30 ~/~/ Alarm when temperature higher than 30.
1.1	649
14.34	650	* (% style="color:blue" %)Downlink Payload:
1.1	651
14.45	652	(% style="color:#037691" %)0x(0C 01 00 1E) (%%) ~/~/ Set AT+SHTEMP=0,30
1.1	653
14.34	654	(% style="color:red" %)(note: 3^^rd^^ byte= 0x00 for low limit(not set), 4^^th^^ byte = 0x1E for high limit: 30)
1.1	655
	656
16.4	657	=== 3.3.4 Set Humidity Alarm Threshold ===
1.1	658
39.6	659
14.34	660	* (% style="color:blue" %)AT Command:
1.1	661
14.34	662	(% style="color:#037691" %)AT+SHHUM=min,max
1.1	663
11.1	664	* When min=0, and max≠0, Alarm higher than max
	665	* When min≠0, and max=0, Alarm lower than min
	666	* When min≠0 and max≠0, Alarm higher than max or lower than min
1.1	667
11.1	668	Example:
1.1	669
14.45	670	AT+SHHUM=70,0 ~/~/ Alarm when humidity lower than 70%.
1.1	671
14.34	672	* (% style="color:blue" %)Downlink Payload:
1.1	673
14.45	674	(% style="color:#037691" %)0x(0C 02 46 00)(%%) ~/~/ Set AT+SHTHUM=70,0
1.1	675
14.34	676	(% style="color:red" %)(note: 3^^rd^^ byte= 0x46 for low limit (70%), 4^^th^^ byte = 0x00 for high limit (not set))
1.1	677
	678
16.4	679	=== 3.3.5 Set Alarm Interval ===
1.1	680
39.6	681
1.1	682	The shortest time of two Alarm packet. (unit: min)
	683
14.34	684	* (% style="color:blue" %)AT Command:
1.1	685
14.34	686	(% style="color:#037691" %)AT+ATDC=30 (%%) ~/~/ The shortest interval of two Alarm packets is 30 minutes, Means is there is an alarm packet uplink, there won't be another one in the next 30 minutes.
1.1	687
14.34	688	* (% style="color:blue" %)Downlink Payload:
1.1	689
14.34	690	(% style="color:#037691" %)0x(0D 00 1E)(%%) ~-~--> Set AT+ATDC=0x 00 1E = 30 minutes
1.1	691
	692
16.4	693	=== 3.3.6 Get Alarm settings ===
1.1	694
	695
	696	Send a LoRaWAN downlink to ask device send Alarm settings.
	697
	698	* (% style="color:#037691" %)Downlink Payload: (%%)0x0E 01
	699
	700	Example:
	701
51.1	702	[[image:image-20230524110211-4.png]]
1.1	703
	704	Explain:
	705
	706	* Alarm & MOD bit is 0x7C, 0x7C >> 2 = 0x31: Means this message is the Alarm settings message.
	707
16.4	708	=== 3.3.7 Set Interrupt Mode ===
14.45	709
11.1	710
43.1	711	Feature, Set Interrupt mode for PA8 of pin.
1.1	712
46.1	713	When AT+INTMOD=0 is set, PA8 is used as a digital input port.
	714
1.1	715	(% style="color:blue" %)AT Command: AT+INTMOD
	716
76.15	717	(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
76.2	718	\|=(% style="width: 155px;background-color:#4F81BD;color:white" %)Command Example\|=(% style="width: 197px;background-color:#4F81BD;color:white" %)Function\|=(% style="width: 158px;background-color:#4F81BD;color:white" %)Response
1.1	719	\|(% style="width:154px" %)AT+INTMOD=?\|(% style="width:196px" %)Show current interrupt mode\|(% style="width:157px" %)(((
	720	0
	721	OK
	722	the mode is 0 =Disable Interrupt
	723	)))
	724	\|(% style="width:154px" %)AT+INTMOD=2\|(% style="width:196px" %)(((
	725	Set Transmit Interval
	726	0. (Disable Interrupt),
	727	~1. (Trigger by rising and falling edge)
	728	2. (Trigger by falling edge)
	729	3. (Trigger by rising edge)
	730	)))\|(% style="width:157px" %)OK
	731
	732	(% style="color:blue" %)Downlink Command: 0x06
	733
	734	Format: Command Code (0x06) followed by 3 bytes.
	735
	736	This means that the interrupt mode of the end node is set to 0x000003=3 (rising edge trigger), and the type code is 06.
	737
	738	* Example 1: Downlink Payload: 06000000 ~/~/ Turn off interrupt mode
	739	* Example 2: Downlink Payload: 06000003 ~/~/ Set the interrupt mode to rising edge trigger
	740
44.2	741	=== 3.3.8 Set Power Output Duration ===
41.1	742
	743
	744	Control the output duration 5V . Before each sampling, device will
	745
	746	~1. first enable the power output to external sensor,
	747
	748	2. keep it on as per duration, read sensor value and construct uplink payload
	749
	750	3. final, close the power output.
	751
	752	(% style="color:blue" %)AT Command: AT+5VT
	753
76.15	754	(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
76.2	755	\|=(% style="width: 155px;background-color:#4F81BD;color:white" %)Command Example\|=(% style="width: 197px;background-color:#4F81BD;color:white" %)Function\|=(% style="width: 158px;background-color:#4F81BD;color:white" %)Response
41.1	756	\|(% style="width:154px" %)AT+5VT=?\|(% style="width:196px" %)Show 5V open time.\|(% style="width:157px" %)0 (default)
	757	OK
64.1	758	\|(% style="width:154px" %)AT+5VT=1000\|(% style="width:196px" %)Close after a delay of 1000 milliseconds.\|(% style="width:157px" %)OK
41.1	759
	760	(% style="color:blue" %)Downlink Command: 0x07
	761
	762	Format: Command Code (0x07) followed by 2 bytes.
	763
	764	The first and second bytes are the time to turn on.
	765
	766	* Example 1: Downlink Payload: 070000 ~-~--> AT+5VT=0
	767	* Example 2: Downlink Payload: 0701F4 ~-~--> AT+5VT=500
	768
78.1	769	=== 3.3.9 Print data entries base on page ===
	770
	771
	772	Feature: Print the sector data from start page to stop page (max is 416 pages).
	773
	774	(% style="color:#4f81bd" %)AT Command: AT+PDTA
	775
	776	(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
	777	\|(% style="background-color:#4f81bd; color:white; width:158px" %)Command Example\|(% style="background-color:#4f81bd; color:white; width:352px" %)Function
	778	\|(% style="width:156px" %)(((
	779	AT+PDTA=1,3
	780	Print page 1 to 3
	781	)))\|(% style="width:311px" %)(((
	782	8019500 19/6/26 16:48 1 2992 sht temp=28.21 sht hum=71.5 ds temp=27.31
	783	8019510 19/6/26 16:53 1 2994 sht temp=27.64 sht hum=69.3 ds temp=26.93
	784	8019520 19/6/26 16:58 1 2996 sht temp=28.39 sht hum=72.0 ds temp=27.06
	785	8019530 19/6/26 17:03 1 2996 sht temp=27.97 sht hum=70.4 ds temp=27.12
	786	8019540 19/6/26 17:08 1 2996 sht temp=27.80 sht hum=72.9 ds temp=27.06
	787	8019550 19/6/26 17:13 1 2998 sht temp=27.30 sht hum=72.4 ds temp=26.68
	788	8019560 19/6/26 17:22 1 2992 sht temp=26.27 sht hum=62.3 ds temp=26.56
	789	8019570
	790	8019580
	791	8019590
	792	80195A0
	793	80195B0
	794	80195C0
	795	80195D0
	796	80195E0
	797	80195F0
	798
	799	OK
	800	)))
	801
	802	(% style="color:#4f81bd" %)Downlink Command:
	803
	804	No downlink commands for feature
	805
	806
	807	=== 3.3.10 Print last few data entries ===
	808
	809
	810	Feature: Print the last few data entries
	811
	812	(% style="color:#4f81bd" %)AT Command: AT+PLDTA
	813
	814	(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
	815	\|(% style="background-color:#4f81bd; color:white; width:158px" %)Command Example\|(% style="background-color:#4f81bd; color:white; width:352px" %)Function
	816	\|(% style="width:156px" %)(((
	817	AT+PLDTA=5
	818	Print last 5 entries
	819	)))\|(% style="width:311px" %)(((
	820	Stop Tx and RTP events when read sensor data
	821	1 19/6/26 13:59 1 3005 sht temp=27.09 sht hum=79.5 ds temp=26.75
	822	2 19/6/26 14:04 1 3007 sht temp=26.65 sht hum=74.8 ds temp=26.43
	823	3 19/6/26 14:09 1 3007 sht temp=26.91 sht hum=77.9 ds temp=26.56
	824	4 19/6/26 14:15 1 3007 sht temp=26.93 sht hum=76.7 ds temp=26.75
	825	5 19/6/26 14:20 1 3007 sht temp=26.78 sht hum=76.6 ds temp=26.43
	826	Start Tx and RTP events
	827	OK
	828	)))
	829
	830	(% style="color:#4f81bd" %)Downlink Command:
	831
	832	No downlink commands for feature
	833
	834
79.1	835	=== 3.3.11 Clear Flash Record ===
78.1	836
	837
	838	Feature: Clear flash storage for data log feature.
	839
	840	(% style="color:#4f81bd" %)AT Command: AT+CLRDTA
	841
	842	(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:503px" %)
	843	\|(% style="background-color:#4f81bd; color:white; width:157px" %)Command Example\|(% style="background-color:#4f81bd; color:white; width:137px" %)Function\|(% style="background-color:#4f81bd; color:white; width:209px" %)Response
	844	\|(% style="width:155px" %)AT+CLRDTA \|(% style="width:134px" %)Clear date record\|(% style="width:209px" %)(((
	845	Clear all stored sensor data…
	846
	847	OK
	848	)))
	849
	850	(% style="color:#4f81bd" %)Downlink Command: 0xA3
	851
	852	* Example: 0xA301 ~/~/ Same as AT+CLRDTA
	853
16.4	854	= 4. Battery & Power Consumption =
14.45	855
1.1	856
73.4	857	S31x-LB use ER26500 + SPC1520 battery pack and S31x-LS use 3000mAh Recharable Battery with Solar Panel. See below link for detail information about the battery info and how to replace.
1.1	858
	859	[[Battery Info & Power Consumption Analyze>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
	860
	861
16.4	862	= 5. OTA Firmware update =
1.1	863
	864
13.1	865	(% class="wikigeneratedid" %)
73.4	866	User can change firmware S31x-LB/LS to:
1.1	867
13.1	868	* Change Frequency band/ region.
	869	* Update with new features.
	870	* Fix bugs.
1.1	871
63.2	872	Firmware and changelog can be downloaded from : [[Firmware download link>>https://www.dropbox.com/sh/fis3g6nmhv0eokg/AAC6BcCZaX4BdqZkduUvZ3jIa?dl=0]]
1.1	873
	874
31.1	875	Methods to Update Firmware:
1.1	876
64.2	877	* (Recommanded way) OTA firmware update via wireless : [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
	878	* Update through UART TTL interface : [[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]].
1.1	879
31.1	880	= 6. FAQ =
1.1	881
	882
	883
31.1	884	= 7. Order Info =
1.1	885
	886
73.5	887	Part Number: (% style="color:blue" %)S31-LB-XX / S31B-LB-XX(%%) or (% style="color:blue" %)S31-LS-XX / S31B-LS-XX(%%)
1.1	888
38.1	889	(% style="color:red" %)XX(%%): The default frequency band
1.1	890
38.1	891	* (% style="color:red" %)AS923(%%): LoRaWAN AS923 band
1.1	892
38.1	893	* (% style="color:red" %)AU915(%%): LoRaWAN AU915 band
1.1	894
38.1	895	* (% style="color:red" %)EU433(%%): LoRaWAN EU433 band
1.1	896
38.1	897	* (% style="color:red" %)EU868(%%): LoRaWAN EU868 band
1.1	898
38.1	899	* (% style="color:red" %)KR920(%%): LoRaWAN KR920 band
1.1	900
38.1	901	* (% style="color:red" %)US915(%%): LoRaWAN US915 band
1.1	902
38.1	903	* (% style="color:red" %)IN865(%%): LoRaWAN IN865 band
1.1	904
38.1	905	* (% style="color:red" %)CN470(%%): LoRaWAN CN470 band
1.1	906
31.1	907	= 8. Packing Info =
1.1	908
39.6	909
39.1	910	(% style="color:#037691" %)Package Includes:
1.1	911
73.4	912	* S31x-LB or S31x-LS LoRaWAN Temperature & Humidity Sensor
1.1	913
39.1	914	(% style="color:#037691" %)Dimension and weight:
1.1	915
31.1	916	* Device Size: cm
1.1	917
31.1	918	* Device Weight: g
1.1	919
31.1	920	* Package Size / pcs : cm
1.1	921
31.1	922	* Weight / pcs : g
1.1	923
31.1	924	= 9. Support =
1.1	925
	926
31.1	927	* Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
39.6	928
	929	* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[Support@dragino.cc>>mailto:Support@dragino.cc]].

Wiki source code of S31/S31B-LB/LS -- LoRaWAN Outdoor Temperature & Humidity Sensor User Manual

Applications

Navigation