Skip to Content
Last modified by Mengting Qiu on 2025/07/01 15:58
From version 79.1
edited by Bei Jinggeng
on 2024/12/05 11:36
Change comment: There is no comment for this version
To version 73.3
edited by Xiaoling
on 2024/01/04 16:30
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Bei
1 +XWiki.Xiaoling
Content
... ... @@ -9,7 +9,7 @@
9 9  
10 10  
11 11  
12 -**Table of Contents:**
12 +**Table of Contents：**
13 13  
14 14  {{toc/}}
15 15  
... ... @@ -33,7 +33,7 @@
33 33  
34 34  S31x-LB/LS (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
35 35  
36 -S31x-LB/LS is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%) or (% style="color:blue" %)**solar powered + Li-ion battery**(%%) it is designed for long term use up to 5 years.
36 +S31x-LB/LS is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%) or (% style="color:blue" %)**solar powered + li-on battery**(%%) it is designed for long term use up to 5 years.
37 37  
38 38  Each S31x-LB/LS is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
39 39  
... ... @@ -51,8 +51,7 @@
51 51  * Support wireless OTA update firmware
52 52  * Uplink on periodically
53 53  * Downlink to change configure
54 -* 8500mAh Li/SOCl2 Battery (S31/S31B-LB)
55 -* Solar panel + 3000mAh Li-ion battery (S31/S31B-LS)
54 +* 8500mAh Battery for long term use
56 56  
57 57  == 1.3 Specification ==
58 58  
... ... @@ -59,7 +59,7 @@
59 59  
60 60  (% style="color:#037691" %)**Common DC Characteristics:**
61 61  
62 -* Supply Voltage: Built-in Battery , 2.5v ~~ 3.6v
61 +* Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
63 63  * Operating Temperature: -40 ~~ 85°C
64 64  
65 65  (% style="color:#037691" %)**Temperature Sensor:**
... ... @@ -107,10 +107,11 @@
107 107  == 1.5 Button & LEDs ==
108 108  
109 109  
110 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/RS485-LB_Waterproof_RS485UART_to_LoRaWAN_Converter/WebHome/image-20240103160425-4.png?rev=1.1||alt="image-20240103160425-4.png"]]
109 +[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675071855856-879.png]]
111 111  
112 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
113 -|=(% style="width: 167px;background-color:#4F81BD;color:white" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 226px;background-color:#4F81BD;color:white" %)**Action**
111 +
112 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
113 +|=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 225px;background-color:#D9E2F3;color:#0070C0" %)**Action**
114 114  |(% style="width:167px" %)Pressing ACT between 1s < time < 3s|(% style="width:117px" %)Send an uplink|(% style="width:225px" %)(((
115 115  If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.
116 116  Meanwhile, BLE module will be active and user can connect via BLE to configure device.
... ... @@ -125,7 +125,7 @@
125 125  == 1.6 BLE connection ==
126 126  
127 127  
128 -S31x-LB/LS support BLE remote configure.
128 +S31x-LB support BLE remote configure.
129 129  
130 130  
131 131  BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
... ... @@ -139,22 +139,17 @@
139 139  
140 140  == 1.7 Pin Definitions ==
141 141  
142 +[[image:http://8.211.40.43/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SN50v3-LB/WebHome/image-20230610163213-1.png?width=699&height=404&rev=1.1||alt="image-20230610163213-1.png"]]
142 142  
143 143  
144 -[[image:https://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/image-20240926134323-1.png?rev=1.1||alt="image-20240926134323-1.png"]]
145 -
146 -
147 147  == 1.8 Hardware Variant ==
148 148  
149 149  
150 -(% border="1" cellspacing="3" style="width:460px" %)
151 -|=(% style="width: 102px;background-color:#4F81BD;color:white" %)Model|=(% style="width: 182px; background-color:#4F81BD;color:white" %)Photo|=(% style="width: 176px; background-color:#4F81BD;color:white" %)Probe Info
148 +(% border="1" cellspacing="5" style="width:461.818px" %)
149 +|=(% style="width: 102px;background-color:#D9E2F3;color:#0070C0" %)Model|=(% style="width: 182px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)Photo|=(% style="width: 176px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)Probe Info
152 152  |(% style="width:102px" %)(((
153 -S31-LB/LS
154 -)))|(% style="width:182px" %)(((
155 -(% style="text-align:center" %)
156 -[[image:image-20240104165223-7.png]]
157 -)))|(% style="width:176px" %)(((
151 +S31-LB
152 +)))|(% style="width:182px" %)[[image:image-20230527093214-2.jpeg]]|(% style="width:176px" %)(((
158 158  1 x SHT31 Probe
159 159  
160 160  Cable Length : 2 meters
... ... @@ -162,11 +162,8 @@
162 162  
163 163  )))
164 164  |(% style="width:102px" %)(((
165 -S31B-LB/LS
166 -)))|(% style="width:182px" %)(((
167 -(% style="text-align:center" %)
168 -[[image:image-20240104165338-9.png]]
169 -)))|(% style="width:176px" %)(((
160 +S31B-LB
161 +)))|(% style="width:182px" %)[[image:image-20230527093155-1.jpeg]]|(% style="width:176px" %)(((
170 170  1 x SHT31 Probe
171 171  
172 172  Installed in device.
... ... @@ -178,7 +178,6 @@
178 178  
179 179  == 1.9 Mechanical ==
180 180  
181 -=== 1.9.1 for LB version ===
182 182  
183 183  [[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
184 184  
... ... @@ -189,18 +189,12 @@
189 189  [[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
190 190  
191 191  
192 -=== 1.9.2 for LS version ===
183 += 2. Configure S31x-LB to connect to LoRaWAN network =
193 193  
194 -
195 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SN50v3-LB/WebHome/image-20231231203439-3.png?width=886&height=385&rev=1.1||alt="image-20231231203439-3.png"]]
196 -
197 -
198 -= 2. Configure S31x-LB/LS to connect to LoRaWAN network =
199 -
200 200  == 2.1 How it works ==
201 201  
202 202  
203 -The S31x-LB/LS is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the S31x-LB/LS. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
188 +The S31x-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the S31x-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
204 204  
205 205  
206 206  == 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
... ... @@ -211,9 +211,9 @@
211 211  The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
212 212  
213 213  
214 -(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from S31x-LB/LS.
199 +(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from S31x-LB.
215 215  
216 -Each S31x-LB/LS is shipped with a sticker with the default device EUI as below:
201 +Each S31x-LB is shipped with a sticker with the default device EUI as below:
217 217  
218 218  [[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
219 219  
... ... @@ -241,10 +241,12 @@
241 241  
242 242  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
243 243  
244 -(% style="color:blue" %)**Step 2:**(%%) Activate on S31x-LB/LS
245 245  
246 -Press the button for 5 seconds to activate the S31x-LB/LS.
230 +(% style="color:blue" %)**Step 2:**(%%) Activate on S31x-LB
247 247  
232 +
233 +Press the button for 5 seconds to activate the S31x-LB.
234 +
248 248  (% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
249 249  
250 250  After join success, it will start to upload messages to TTN and you can see the messages in the panel.
... ... @@ -255,14 +255,15 @@
255 255  === 2.3.1 Device Status, FPORT~=5 ===
256 256  
257 257  
258 -Users can use the downlink command(**0x26 01**) to ask S31x-LB/LS to send device configure detail, include device configure status. S31x-LB/LS will uplink a payload via FPort=5 to server.
245 +Users can use the downlink command(**0x26 01**) to ask S31x-LB to send device configure detail, include device configure status. S31x-LB will uplink a payload via FPort=5 to server.
259 259  
260 260  The Payload format is as below.
261 261  
262 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
263 -|(% colspan="6" style="background-color:#4f81bd; color:white" %)**Device Status (FPORT=5)**
249 +
250 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
251 +|(% colspan="6" style="background-color:#d9e2f3; color:#0070c0" %)**Device Status (FPORT=5)**
264 264  |(% style="width:103px" %)**Size (bytes)**|(% style="width:72px" %)**1**|**2**|(% style="width:91px" %)**1**|(% style="width:86px" %)**1**|(% style="width:44px" %)**2**
265 -|(% style="width:103px" %)Value|(% style="width:72px" %)Sensor Model|Firmware Version|(% style="width:91px" %)Frequency Band|(% style="width:86px" %)Sub-band|(% style="width:44px" %)BAT
253 +|(% style="width:103px" %)**Value**|(% style="width:72px" %)Sensor Model|Firmware Version|(% style="width:91px" %)Frequency Band|(% style="width:86px" %)Sub-band|(% style="width:44px" %)BAT
266 266  
267 267  Example parse in TTNv3
268 268  
... ... @@ -269,7 +269,7 @@
269 269  [[image:image-20230524144422-1.png||height="174" width="1080"]]
270 270  
271 271  
272 -(% style="color:#037691" %)**Sensor Model**(%%): For S31x-LB/LS, this value is 0x0A
260 +(% style="color:#037691" %)**Sensor Model**(%%): For S31x-LB, this value is 0x0A
273 273  
274 274  (% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
275 275  
... ... @@ -327,10 +327,10 @@
327 327  
328 328  Sensor Data is uplink via FPORT=2
329 329  
330 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:500px" %)
331 -|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
318 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
319 +|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)(((
332 332  **Size(bytes)**
333 -)))|=(% style="width: 40px;background-color:#4F81BD;color:white" %)2|=(% style="width: 90px;background-color:#4F81BD;color:white" %)4|=(% style="width: 150px; background-color: #4F81BD;color:white" %)1|=(% style="width: 80px; background-color: #4F81BD;color:white" %)**2**|=(% style="width: 80px; background-color: #4F81BD;color:white" %)2
321 +)))|=(% style="width: 40px;background-color:#D9E2F3;color:#0070C0" %)2|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)4|=(% style="width: 150px; background-color: #D9E2F3;color:#0070C0" %)1|=(% style="width: 80px; background-color: #D9E2F3;color:#0070C0" %)**2**|=(% style="width: 80px; background-color: #D9E2F3;color:#0070C0" %)2
334 334  |(% style="width:99px" %)Value|(% style="width:69px" %)(((
335 335  Battery
336 336  )))|(% style="width:130px" %)(((
... ... @@ -363,16 +363,18 @@
363 363  
364 364  If payload is: FF3FH :  (FF3F & 8000 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
365 365  
366 -(FF3F & 8000:Judge whether the highest bit is 1, when the highest bit is 1, it is negative)
354 +(FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative)
367 367  
368 368  
369 369  ==== (% style="color:#4472c4" %)**Humidity**(%%) ====
370 370  
359 +
371 371  Read:0x(0197)=412    Value:  412 / 10=41.2, So 41.2%
372 372  
373 373  
374 374  ==== (% style="color:#4472c4" %)**Alarm Flag & MOD & Level of PA8**(%%) ====
375 375  
365 +
376 376  **Example:**
377 377  
378 378  If payload & 0x01 = 0x01  **~-~->** This is an Alarm Message.It means that the temperature and humidity exceed the alarm value or trigger an interrupt.
... ... @@ -401,25 +401,30 @@
401 401  == 2.5 Datalog Feature ==
402 402  
403 403  
404 -Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, S31x-LB/LS will store the reading for future retrieving purposes.
394 +Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, S31x-LB will store the reading for future retrieving purposes.
405 405  
406 406  
407 407  === 2.5.1 Ways to get datalog via LoRaWAN ===
408 408  
409 409  
410 -Set PNACKMD=1, S31x-LB/LS will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB/LS will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
400 +Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayload28FPORT3D329"]], S31x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
411 411  
412 412  * (((
413 -a) S31x-LB/LS will do an ACK check for data records sending to make sure every data arrive server.
403 +a) S31x-LB will do an ACK check for data records sending to make sure every data arrive server.
414 414  )))
415 415  * (((
416 -b) S31x-LB/LS will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB/LS won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB/LS gets a ACK, S31x-LB/LS will consider there is a network connection and resend all NONE-ACK messages.
406 +b) S31x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB gets a ACK, S31x-LB will consider there is a network connection and resend all NONE-ACK messages.
417 417  )))
418 418  
409 +Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
410 +
411 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
412 +
413 +
419 419  === 2.5.2 Unix TimeStamp ===
420 420  
421 421  
422 -S31x-LB/LS uses Unix TimeStamp format based on
417 +S31x-LB uses Unix TimeStamp format based on
423 423  
424 424  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
425 425  
... ... @@ -438,7 +438,7 @@
438 438  
439 439  User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
440 440  
441 -Once S31x-LB/LS Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to S31x-LB/LS. If S31x-LB/LS fails to get the time from the server, S31x-LB/LS will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
436 +Once S31x-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to S31x-LB. If S31x-LB fails to get the time from the server, S31x-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
442 442  
443 443  (% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
444 444  
... ... @@ -450,10 +450,10 @@
450 450  
451 451  **Retrieval data payload:**
452 452  
453 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:500px" %)
454 -|=(% style="width: 60px;background-color:#4F81BD;color:white" %)(((
448 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
449 +|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)(((
455 455  **Size(bytes)**
456 -)))|=(% style="width: 40px; background-color:#4F81BD;color:white" %)**2**|=(% style="width: 55px; background-color:#4F81BD;color:white" %)**2**|=(% style="width: 65px; background-color:#4F81BD;color:white" %)**2**|=(% style="width: 180px; background-color:#4F81BD;color:white" %)**1**|=(% style="width: 100px; background-color:#4F81BD;color:white" %)**4**
451 +)))|=(% style="width: 40px; background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 55px; background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 65px; background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 180px; background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 100px; background-color:#D9E2F3;color:#0070C0" %)**4**
457 457  |(% style="width:103px" %)Value|(% style="width:68px" %)(((
458 458  ignore
459 459  )))|(% style="width:104px" %)(((
... ... @@ -460,6 +460,10 @@
460 460  (((
461 461  Humidity
462 462  )))
458 +
459 +(((
460 +
461 +)))
463 463  )))|(% style="width:87px" %)(((
464 464  Temperature
465 465  )))|(% style="width:178px" %)(((
... ... @@ -493,7 +493,7 @@
493 493  
494 494  **Example:**
495 495  
496 -If S31x-LB/LS has below data inside Flash:
495 +If S31x-LB has below data inside Flash:
497 497  
498 498  [[image:image-20230524114654-2.png]]
499 499  
... ... @@ -505,7 +505,7 @@
505 505   Stop time: 646D856C= time 23/5/24 03:33:00
506 506  
507 507  
508 -**S31x-LB/LS will uplink this payload.**
507 +**S31x-LB will uplink this payload.**
509 509  
510 510  [[image:image-20230524114826-3.png||height="448" width="1244"]]
511 511  
... ... @@ -543,7 +543,7 @@
543 543  == 2.6 Temperature Alarm Feature ==
544 544  
545 545  
546 -S31x-LB/LS work flow with Alarm feature.
545 +S31x-LB work flow with Alarm feature.
547 547  
548 548  
549 549  [[image:image-20230524110125-3.png||height="768" width="1115"]]
... ... @@ -553,7 +553,7 @@
553 553  == 2.7 Frequency Plans ==
554 554  
555 555  
556 -The S31x-LB/LS uses OTAA mode and below frequency plans by default. Each frequency band use different firmware, user update the firmware to the corresponding band for their country.
555 +The S31x-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
557 557  
558 558  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
559 559  
... ... @@ -564,12 +564,12 @@
564 564  **Firmware download link: **[[https:~~/~~/www.dropbox.com/sh/fis3g6nmhv0eokg/AAC6BcCZaX4BdqZkduUvZ3jIa?dl=0>>https://www.dropbox.com/sh/fis3g6nmhv0eokg/AAC6BcCZaX4BdqZkduUvZ3jIa?dl=0]]
565 565  
566 566  
567 -= 3. Configure S31x-LB/LS =
566 += 3. Configure S31x-LB =
568 568  
569 569  == 3.1 Configure Methods ==
570 570  
571 571  
572 -S31x-LB/LS supports below configure method:
571 +S31x-LB supports below configure method:
573 573  
574 574  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
575 575  * AT Command via UART Connection : See [[UART Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
... ... @@ -588,10 +588,10 @@
588 588  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
589 589  
590 590  
591 -== 3.3 Commands special design for S31x-LB/LS ==
590 +== 3.3 Commands special design for S31x-LB ==
592 592  
593 593  
594 -These commands only valid for S31x-LB/LS, as below:
593 +These commands only valid for S31x-LB, as below:
595 595  
596 596  
597 597  === 3.3.1 Set Transmit Interval Time ===
... ... @@ -601,8 +601,8 @@
601 601  
602 602  (% style="color:blue" %)**AT Command: AT+TDC**
603 603  
604 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
605 -|=(% style="width: 156px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 137px;background-color:#4F81BD;color:white" %)**Function**|=(% style="background-color:#4F81BD;color:white" %)**Response**
603 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
604 +|=(% style="width: 156px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="background-color:#D9E2F3;color:#0070C0" %)**Response**
606 606  |(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
607 607  30000
608 608  OK
... ... @@ -714,8 +714,8 @@
714 714  
715 715  (% style="color:blue" %)**AT Command: AT+INTMOD**
716 716  
717 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
718 -|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 197px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 158px;background-color:#4F81BD;color:white" %)**Response**
716 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
717 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
719 719  |(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
720 720  0
721 721  OK
... ... @@ -751,8 +751,8 @@
751 751  
752 752  (% style="color:blue" %)**AT Command: AT+5VT**
753 753  
754 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
755 -|=(% style="width: 155px;background-color:#4F81BD;color:white" %)**Command Example**|=(% style="width: 197px;background-color:#4F81BD;color:white" %)**Function**|=(% style="width: 158px;background-color:#4F81BD;color:white" %)**Response**
753 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
754 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
756 756  |(% style="width:154px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:157px" %)0 (default)
757 757  OK
758 758  |(% style="width:154px" %)AT+5VT=1000|(% style="width:196px" %)Close after a delay of 1000 milliseconds.|(% style="width:157px" %)OK
... ... @@ -766,95 +766,10 @@
766 766  * Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
767 767  * Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
768 768  
769 -=== 3.3.9 Print data entries base on page ===
770 -
771 -
772 -Feature: Print the sector data from start page to stop page (max is 416 pages).
773 -
774 -(% style="color:#4f81bd" %)**AT Command: AT+PDTA**
775 -
776 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
777 -|(% style="background-color:#4f81bd; color:white; width:158px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:352px" %)**Function**
778 -|(% style="width:156px" %)(((
779 -AT+PDTA=1,3
780 -Print page 1 to 3
781 -)))|(% style="width:311px" %)(((
782 -8019500 19/6/26 16:48 1 2992 sht temp=28.21 sht hum=71.5 ds temp=27.31
783 -8019510 19/6/26 16:53 1 2994 sht temp=27.64 sht hum=69.3 ds temp=26.93
784 -8019520 19/6/26 16:58 1 2996 sht temp=28.39 sht hum=72.0 ds temp=27.06
785 -8019530 19/6/26 17:03 1 2996 sht temp=27.97 sht hum=70.4 ds temp=27.12
786 -8019540 19/6/26 17:08 1 2996 sht temp=27.80 sht hum=72.9 ds temp=27.06
787 -8019550 19/6/26 17:13 1 2998 sht temp=27.30 sht hum=72.4 ds temp=26.68
788 -8019560 19/6/26 17:22 1 2992 sht temp=26.27 sht hum=62.3 ds temp=26.56
789 -8019570
790 -8019580
791 -8019590
792 -80195A0
793 -80195B0
794 -80195C0
795 -80195D0
796 -80195E0
797 -80195F0
798 -
799 -OK
800 -)))
801 -
802 -(% style="color:#4f81bd" %)**Downlink Command:**
803 -
804 -No downlink commands for feature
805 -
806 -
807 -=== 3.3.10 Print last few data entries ===
808 -
809 -
810 -Feature: Print the last few data entries
811 -
812 -(% style="color:#4f81bd" %)**AT Command: AT+PLDTA**
813 -
814 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:510px" %)
815 -|(% style="background-color:#4f81bd; color:white; width:158px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:352px" %)**Function**
816 -|(% style="width:156px" %)(((
817 -AT+PLDTA=5
818 -Print last 5 entries
819 -)))|(% style="width:311px" %)(((
820 -Stop Tx and RTP events when read sensor data
821 -1 19/6/26 13:59 1 3005 sht temp=27.09 sht hum=79.5 ds temp=26.75
822 -2 19/6/26 14:04 1 3007 sht temp=26.65 sht hum=74.8 ds temp=26.43
823 -3 19/6/26 14:09 1 3007 sht temp=26.91 sht hum=77.9 ds temp=26.56
824 -4 19/6/26 14:15 1 3007 sht temp=26.93 sht hum=76.7 ds temp=26.75
825 -5 19/6/26 14:20 1 3007 sht temp=26.78 sht hum=76.6 ds temp=26.43
826 -Start Tx and RTP events
827 -OK
828 -)))
829 -
830 -(% style="color:#4f81bd" %)**Downlink Command:**
831 -
832 -No downlink commands for feature
833 -
834 -
835 -=== 3.3.11 Clear Flash Record ===
836 -
837 -
838 -Feature: Clear flash storage for data log feature.
839 -
840 -(% style="color:#4f81bd" %)**AT Command: AT+CLRDTA**
841 -
842 -(% border="1" cellspacing="3" style="background-color:#f2f2f2; width:503px" %)
843 -|(% style="background-color:#4f81bd; color:white; width:157px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:137px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:209px" %)**Response**
844 -|(% style="width:155px" %)AT+CLRDTA |(% style="width:134px" %)Clear date record|(% style="width:209px" %)(((
845 -Clear all stored sensor data…
846 -
847 -OK
848 -)))
849 -
850 -(% style="color:#4f81bd" %)**Downlink Command: 0xA3**
851 -
852 -* Example: 0xA301  ~/~/  Same as AT+CLRDTA
853 -
854 854  = 4. Battery & Power Consumption =
855 855  
856 856  
857 -S31x-LB use ER26500 + SPC1520 battery pack and S31x-LS use 3000mAh Recharable Battery with Solar Panel. See below link for detail information about the battery info and how to replace.
771 +S31x-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
858 858  
859 859  [[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
860 860  
... ... @@ -863,7 +863,7 @@
863 863  
864 864  
865 865  (% class="wikigeneratedid" %)
866 -User can change firmware S31x-LB/LS to:
780 +User can change firmware S31x-LB to:
867 867  
868 868  * Change Frequency band/ region.
869 869  * Update with new features.
... ... @@ -884,7 +884,7 @@
884 884  = 7. Order Info =
885 885  
886 886  
887 -Part Number: (% style="color:blue" %)**S31-LB-XX / S31B-LB-XX**(%%)**  or  (% style="color:blue" %)S31-LS-XX / S31B-LS-XX(%%)**
801 +Part Number: (% style="color:blue" %)**S31-LB-XX  / S31B-LB-XX**
888 888  
889 889  (% style="color:red" %)**XX**(%%): The default frequency band
890 890  
... ... @@ -909,7 +909,7 @@
909 909  
910 910  (% style="color:#037691" %)**Package Includes**:
911 911  
912 -* S31x-LB or S31x-LS LoRaWAN Temperature & Humidity Sensor
826 +* S31x-LB LoRaWAN Temperature & Humidity Sensor
913 913  
914 914  (% style="color:#037691" %)**Dimension and weight**:
915 915  
image-20240104165223-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -30.6 KB
Content
image-20240104165302-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -17.5 KB
Content
image-20240104165338-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -15.7 KB
Content