Skip to Content
Last modified by Mengting Qiu on 2025/07/01 15:58
From version 60.19
edited by Xiaoling
on 2023/06/05 14:40
Change comment: There is no comment for this version
To version 14.38
edited by Xiaoling
on 2023/04/17 11:14
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,9 +1,6 @@
1 -(% style="text-align:center" %)
2 -[[image:S31-B.jpg]]
1 +
3 3  
4 4  
5 -
6 -
7 7  **Table of Contents：**
8 8  
9 9  {{toc/}}
... ... @@ -18,24 +18,41 @@
18 18  == 1.1 What is S31x-LB LoRaWAN Temperature & Humidity Sensor ==
19 19  
20 20  
21 -The Dragino S31x-LB is a (% style="color:blue" %)**LoRaWAN Temperature and Humidity Sensor**(%%) for Internet of Things solution. It is used to measure the (% style="color:blue" %)**surrounding environment temperature and relative air humidity precisely**(%%), and then upload to IoT server via LoRaWAN wireless protocol.
18 +(((
19 +The Dragino S31x-LB is a (% style="color:blue" %)**LoRaWAN Temperature and Humidity Sensor**(%%) for Internet of Things solution. It is used to measure the (% style="color:blue" %)**surrounding environment temperature and relative air humidity precisely**(%%), and then upload to IoT server via LoRaWAN wireless protocol.
20 +)))
22 22  
23 -The temperature & humidity sensor used in S31x-LB is SHT31, which is fully calibrated, linearized, and temperature compensated digital output from Sensirion, it provides a strong reliability and long-term stability. The SHT31 is fixed in a (% style="color:blue" %)**waterproof anti-condensation casing**(%%) for long term use.
22 +(((
23 +The temperature & humidity sensor used in S31x-LB is SHT31, which is fully calibrated, linearized, and temperature compensated digital output from Sensirion, it provides a strong reliability and long-term stability. The SHT31 is fixed in a (% style="color:blue" %)**waterproof anti-condensation casing**(%%) for long term use.
24 +)))
24 24  
26 +(((
25 25  The LoRa wireless technology used in S31x-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
28 +)))
26 26  
27 -S31x-LB supports (% style="color:blue" %)**Temperature & Humdity alarm feature**(%%), user can set temperature alarm for instant notice. S31x-LB supports Datalog feature, it can save the data when there is no LoRaWAN network and uplink when network recover.
30 +(((
31 +S31x-LB supports (% style="color:blue" %)**Temperature & Humdity alarm feature,**(%%) user can set temperature alarm for instant notice. S31x-LB supports Datalog feature, it can save the data when there is no LoRaWAN network and uplink when network recover.
32 +)))
28 28  
29 -S31x-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
34 +(((
35 +S31x-LB has max 3 probes which measure maximum 3 temperature points.
36 +)))
30 30  
31 -S31x-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
38 +(((
39 +S31x-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
40 +)))
32 32  
42 +(((
43 +S31x-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
44 +)))
45 +
46 +(((
33 33  Each S31x-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
48 +)))
34 34  
35 35  
36 36  == 1.2 ​Features ==
37 37  
38 -
39 39  * LoRaWAN 1.0.3 Class A
40 40  * Ultra-low power consumption
41 41  * External 3 meters SHT31 probe (For S31-LB)
... ... @@ -48,7 +48,6 @@
48 48  * Downlink to change configure
49 49  * 8500mAh Battery for long term use
50 50  
51 -
52 52  == 1.3 Specification ==
53 53  
54 54  
... ... @@ -91,7 +91,6 @@
91 91  * Sleep Mode: 5uA @ 3.3v
92 92  * LoRa Transmit Mode: 125mA @ 20dBm, 82mA @ 14dBm
93 93  
94 -
95 95  == 1.4 Sleep mode and working mode ==
96 96  
97 97  
... ... @@ -119,11 +119,10 @@
119 119  )))
120 120  |(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
121 121  
122 -
123 123  == 1.6 BLE connection ==
124 124  
125 125  
126 -S31x-LB support BLE remote configure.
137 +D2x-LB support BLE remote configure.
127 127  
128 128  
129 129  BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
... ... @@ -135,19 +135,12 @@
135 135  If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
136 136  
137 137  
138 -== 1.7 Pin Definitions ==
149 +== 1.7  Hardware Variant ==
139 139  
140 -[[image:image-20230523174230-1.png]]
141 141  
142 -
143 -== 1.8 Hardware Variant ==
144 -
145 -
146 -(% border="1" cellspacing="5" style="width:472px" %)
147 -|=(% style="width: 102px;background-color:#D9E2F3;color:#0070C0" %)Model|=(% style="width: 190px;background-color:#D9E2F3;color:#0070C0" %)Photo|=(% style="width: 187px; background-color:#D9E2F3;color:#0070C0" %)Probe Info
148 -|(% style="width:102px" %)(((
149 -S31-LB
150 -)))|(% style="width:190px" %)[[image:image-20230527093214-2.jpeg]]|(% style="width:187px" %)(((
152 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
153 +|=(% style="width: 102px;background-color:#D9E2F3;color:#0070C0" %)Model|=(% style="width: 190px;background-color:#D9E2F3;color:#0070C0" %)Photo|=(% style="width: 218px;background-color:#D9E2F3;color:#0070C0" %)Probe Info
154 +|(% style="width:102px" %)S31-LB|(% style="width:190px" %) |(% style="width:297px" %)(((
151 151  1 x SHT31 Probe
152 152  
153 153  Cable Length : 2 meters
... ... @@ -154,9 +154,7 @@
154 154  
155 155  
156 156  )))
157 -|(% style="width:102px" %)(((
158 -S31B-LB
159 -)))|(% style="width:190px" %)[[image:image-20230527093155-1.jpeg]]|(% style="width:187px" %)(((
161 +|(% style="width:102px" %)S31B-LB|(% style="width:190px" %) |(% style="width:297px" %)(((
160 160  1 x SHT31 Probe
161 161  
162 162  Installed in device.
... ... @@ -166,7 +166,7 @@
166 166  
167 167  
168 168  
169 -== 1.9 Mechanical ==
171 +== 1.8 Mechanical ==
170 170  
171 171  
172 172  [[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
... ... @@ -191,6 +191,9 @@
191 191  
192 192  Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
193 193  
196 +
197 +
198 +
194 194  The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
195 195  
196 196  
... ... @@ -198,9 +198,10 @@
198 198  
199 199  Each S31x-LB is shipped with a sticker with the default device EUI as below:
200 200  
201 -[[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
206 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220607170145-1.jpeg?rev=1.1||alt="image-20220607170145-1.jpeg"]]
202 202  
203 203  
209 +
204 204  You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
205 205  
206 206  
... ... @@ -211,18 +211,18 @@
211 211  
212 212  (% style="color:blue" %)**Add APP EUI and DEV EUI**
213 213  
214 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-4.png?width=753&height=551&rev=1.1||alt="图片-20220611161308-4.png"]]
220 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-4.png?width=753&height=551&rev=1.1||alt="image-20220611161308-4.png"]]
215 215  
216 216  
217 217  (% style="color:blue" %)**Add APP EUI in the application**
218 218  
219 219  
220 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-5.png?width=742&height=601&rev=1.1||alt="图片-20220611161308-5.png"]]
226 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-5.png?width=742&height=601&rev=1.1||alt="image-20220611161308-5.png"]]
221 221  
222 222  
223 223  (% style="color:blue" %)**Add APP KEY**
224 224  
225 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
231 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="image-20220611161308-6.png"]]
226 226  
227 227  
228 228  (% style="color:blue" %)**Step 2:**(%%) Activate on S31x-LB
... ... @@ -252,7 +252,7 @@
252 252  
253 253  Example parse in TTNv3
254 254  
255 -[[image:image-20230524144422-1.png||height="174" width="1080"]]
261 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual/WebHome/image-20230415153147-2.png?width=1120&height=220&rev=1.1||alt="image-20230415153147-2.png"]]
256 256  
257 257  
258 258  (% style="color:#037691" %)**Sensor Model**(%%): For S31x-LB, this value is 0x0A
... ... @@ -313,27 +313,24 @@
313 313  
314 314  Sensor Data is uplink via FPORT=2
315 315  
316 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
317 -|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)(((
322 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
323 +|=(% style="width: 90px;background-color:#D9E2F3" %)(((
318 318  **Size(bytes)**
319 -)))|=(% style="width: 40px;background-color:#D9E2F3;color:#0070C0" %)2|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)4|=(% style="width: 150px; background-color: #D9E2F3;color:#0070C0" %)1|=(% style="width: 80px; background-color: #D9E2F3;color:#0070C0" %)**2**|=(% style="width: 80px; background-color: #D9E2F3;color:#0070C0" %)2
320 -|(% style="width:99px" %)Value|(% style="width:69px" %)(((
321 -Battery
325 +)))|=(% style="width: 69px;background-color:#D9E2F3" %)2|=(% style="width: 80px;background-color:#D9E2F3" %)4|=(% style="width: 70px;background-color:#D9E2F3" %)1|=(% style="width: 80px;background-color:#D9E2F3" %)**2**|=(% style="width: 80px;background-color:#D9E2F3" %)2
326 +|(% style="width:99px" %)**Value**|(% style="width:69px" %)(((
327 +[[Battery>>||anchor="HBattery:"]]
322 322  )))|(% style="width:130px" %)(((
323 -Unix TimeStamp
324 -)))|(% style="width:194px" %)(((
325 -Alarm Flag & MOD& Level of PA8
326 -)))|(% style="width:106px" %)(((
327 -Temperature
328 -)))|(% style="width:97px" %)(((
329 -Humidity
329 +[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
330 +)))|(% style="width:91px" %)(((
331 +[[Alarm Flag>>||anchor="HAlarmFlag26MOD:"]]
332 +)))|(% style="width:103px" %)(((
333 +[[Temperature>>||anchor="HTemperature:"]]
334 +)))|(% style="width:80px" %)(((
335 +[[Humidity>>||anchor="HHumidity:"]]
330 330  )))
331 331  
332 -[[image:image-20230524144456-2.png||height="180" width="1142"]]
338 +==== (% style="color:#4472c4" %)**Battery:**(%%) ====
333 333  
334 -
335 -==== (% style="color:#4472c4" %)**Battery**(%%) ====
336 -
337 337  Sensor Battery Level.
338 338  
339 339  Ex1: 0x0B45 = 2885mV
... ... @@ -342,7 +342,7 @@
342 342  
343 343  
344 344  
345 -==== (% style="color:#4472c4" %)**Temperature**(%%) ====
348 +==== (% style="color:#4472c4" %)**Temperature:**(%%) ====
346 346  
347 347  **Example**:
348 348  
... ... @@ -353,27 +353,23 @@
353 353  （FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
354 354  
355 355  
356 -==== (% style="color:#4472c4" %)**Humidity**(%%) ====
359 +==== (% style="color:#4472c4" %)**Humidity:**(%%) ====
357 357  
358 358  
359 359  Read:0x(0197)=412    Value:  412 / 10=41.2, So 41.2%
360 360  
361 361  
362 -==== (% style="color:#4472c4" %)**Alarm Flag & MOD & Level of PA8**(%%) ====
365 +==== (% style="color:#4472c4" %)**Alarm Flag& MOD:**(%%) ====
363 363  
364 364  
365 365  **Example:**
366 366  
367 -If payload & 0x01 = 0x01  **~-~->** This is an Alarm Message.It means that the temperature and humidity exceed the alarm value or trigger an interrupt.
370 +If payload & 0x01 = 0x01  **~-~->** This is an Alarm Message
368 368  
369 -If payload & 0x01 = 0x00  **~-~->** This is a normal uplink message, no alarm.
372 +If payload & 0x01 = 0x00  **~-~->** This is a normal uplink message, no alarm
370 370  
371 -If payload & 0x80>>7 = 0x01  **~-~->** The PA8 is low level.
374 +If payload >> 2 = 0x00  **~-~->**  means MOD=1, This is a sampling uplink message
372 372  
373 -If payload & 0x80>>7 =0x00  **~-~->** The PA8 is high level.
374 -
375 -If payload >> 2 = 0x00  **~-~->**  means MOD=1, This is a sampling uplink message.
376 -
377 377  If payload >> 2 = 0x31  **~-~->**  means MOD=31, this message is a reply message for polling, this message contains the alarm settings. see [[this link>>path:#HPolltheAlarmsettings:]] for detail. 
378 378  
379 379  
... ... @@ -384,7 +384,7 @@
384 384  
385 385  In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from:
386 386  
387 -[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/S31-LB%26S31B-LB>>https://github.com/dragino/dragino-end-node-decoder/tree/main/S31-LB%26S31B-LB]]
386 +[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/LSN50v2-S31%26S31B >>https://github.com/dragino/dragino-end-node-decoder/tree/main/LSN50v2-S31%26S31B]]
388 388  
389 389  
390 390  == 2.5 Datalog Feature ==
... ... @@ -396,34 +396,28 @@
396 396  === 2.5.1 Ways to get datalog via LoRaWAN ===
397 397  
398 398  
399 -Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayload28FPORT3D329"]], S31x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
398 +Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayloadA028FPORT3D329"]], S31x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
400 400  
401 -* (((
402 -a) S31x-LB will do an ACK check for data records sending to make sure every data arrive server.
403 -)))
404 -* (((
405 -b) S31x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB gets a ACK, S31x-LB will consider there is a network connection and resend all NONE-ACK messages.
406 -)))
400 +* a) S31x-LB will do an ACK check for data records sending to make sure every data arrive server.
401 +* b) S31x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB gets a ACK, S31x-LB will consider there is a network connection and resend all NONE-ACK messages.
407 407  
408 408  Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
409 409  
410 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
405 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="image-20220703111700-2.png" height="381" width="1119"]]
411 411  
412 -
413 413  === 2.5.2 Unix TimeStamp ===
414 414  
415 415  
416 416  S31x-LB uses Unix TimeStamp format based on
417 417  
418 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
412 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="image-20220523001219-11.png" height="97" width="627"]]
419 419  
420 420  User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
421 421  
422 422  Below is the converter example
423 423  
424 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="图片-20220523001219-12.png" height="298" width="720"]]
418 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="image-20220523001219-12.png" height="298" width="720"]]
425 425  
426 -
427 427  So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
428 428  
429 429  
... ... @@ -444,31 +444,18 @@
444 444  
445 445  **Retrieval data payload:**
446 446  
447 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
448 -|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)(((
440 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
441 +|=(% style="width: 80px;background-color:#D9E2F3" %)(((
449 449  **Size(bytes)**
450 -)))|=(% style="width: 40px; background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 55px; background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 65px; background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 180px; background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 100px; background-color:#D9E2F3;color:#0070C0" %)**4**
451 -|(% style="width:103px" %)Value|(% style="width:68px" %)(((
452 -ignore
453 -)))|(% style="width:104px" %)(((
454 -(((
455 -Humidity
456 -)))
443 +)))|=(% style="width: 54px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 51px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 89px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 103px; background-color: rgb(217, 226, 243);" %)**1**|=(% style="width: 80px; background-color: rgb(217, 226, 243);" %)**4**
444 +|(% style="width:103px" %)**Value**|(% style="width:54px" %)(((
445 +[[Temp_Black>>||anchor="HTemperatureBlack:"]]
446 +)))|(% style="width:51px" %)[[Temp_White>>||anchor="HTemperatureWhite:"]]|(% style="width:89px" %)[[Temp_ Red or Temp _White>>||anchor="HTemperatureREDorTemperatureWhite:"]]|(% style="width:103px" %)Poll message flag & Ext|(% style="width:54px" %)[[Unix Time Stamp>>||anchor="H2.5.2UnixTimeStamp"]]
457 457  
458 -(((
459 -
460 -)))
461 -)))|(% style="width:87px" %)(((
462 -Temperature
463 -)))|(% style="width:178px" %)(((
464 -Poll message flag & Alarm Flag& Level of PA8
465 -)))|(% style="width:137px" %)Unix Time Stamp
448 +**Poll message flag & Ext:**
466 466  
467 -**Poll message flag & Alarm Flag & Level of PA8:**
450 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20221006192726-1.png?width=754&height=112&rev=1.1||alt="image-20221006192726-1.png" height="112" width="754"]]
468 468  
469 -[[image:image-20230524114302-1.png||height="115" width="736"]]
470 -
471 -
472 472  **No ACK Message**:  1: This message means this payload is fromn Uplink Message which doesn't get ACK from the server before ( for **PNACKMD=1** feature)
473 473  
474 474  **Poll Message Flag**: 1: This message is a poll message reply.
... ... @@ -489,55 +489,43 @@
489 489  
490 490  If devise doesn't have any data in the polling time. Device will uplink 11 bytes of 0   
491 491  
472 +
492 492  **Example:**
493 493  
494 -If S31x-LB has below data inside Flash:
475 +If D2x-LB has below data inside Flash:
495 495  
496 -[[image:image-20230524114654-2.png]]
477 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523144455-1.png?width=735&height=335&rev=1.1||alt="image-20220523144455-1.png" height="335" width="735"]]
497 497  
479 +If user sends below downlink command: 3160065F9760066DA705
498 498  
499 -If user sends below downlink command: 31646D84E1646D856C05
481 +Where : Start time: 60065F97 = time 21/1/19 04:27:03
500 500  
501 -Where : Start time: 646D84E1 = time 23/5/24 03:30:41
483 + Stop time: 60066DA7= time 21/1/19 05:27:03
502 502  
503 - Stop time: 646D856C= time 23/5/24 03:33:00
504 504  
505 -
506 506  **S31x-LB will uplink this payload.**
507 507  
508 -[[image:image-20230524114826-3.png||height="448" width="1244"]]
488 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-13.png?width=727&height=421&rev=1.1||alt="image-20220523001219-13.png" height="421" width="727"]]
509 509  
510 -(((
511 -00 00 02 36 01 10 40 64 6D 84 E1 00 00 02 37 01 10 40 64 6D 84 F8 00 00 02 37 01 0F 40 64 6D 85 04 00 00 02 3A 01 0F 40 64 6D 85 18 00 00 02 3C 01 0F 40 64 6D 85 36 00 00 02 3D 01 0E 40 64 6D 85 3F 00 00 02 3F 01 0E 40 64 6D 85 60 00 00 02 40 01 0E 40 64 6D 85 6A
512 -)))
490 +__**7FFF089801464160065F97**__ **__7FFF__ __088E__ __014B__ __41__ __60066009__** 7FFF0885014E41600660667FFF0875015141600662BE7FFF086B015541600665167FFF08660155416006676E7FFF085F015A41600669C67FFF0857015D4160066C1E
513 513  
514 -(((
515 515  Where the first 11 bytes is for the first entry:
516 -)))
517 517  
518 -(((
519 -00 00 02 36 01 10 40 64 6D 84 E1
520 -)))
494 +7FFF089801464160065F97
521 521  
522 -(((
523 -**Hum**=0x0236/10=56.6
524 -)))
496 +**Ext sensor data**=0x7FFF/100=327.67
525 525  
526 -(((
527 -**Temp**=0x0110/10=27.2
528 -)))
498 +**Temp**=0x088E/100=22.00
529 529  
530 -(((
531 -**poll message flag & Alarm Flag & Level of PA8**=0x40,means reply data,sampling uplink message,the PA8 is low level.
532 -)))
500 +**Hum**=0x014B/10=32.6
533 533  
534 -(((
535 -**Unix time** is 0x646D84E1=1684899041s=23/5/24 03:30:41
536 -)))
502 +**poll message flag & Ext**=0x41,means reply data,Ext=1
537 537  
504 +**Unix time** is 0x60066009=1611030423s=21/1/19 04:27:03
538 538  
539 -(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的
540 540  
507 +(% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||data-widget="image" draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="Click and drag to resize" %)​(% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||data-widget="image" draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="Click and drag to resize" %)​
508 +
541 541  == 2.6 Temperature Alarm Feature ==
542 542  
543 543  
... ... @@ -544,10 +544,9 @@
544 544  S31x-LB work flow with Alarm feature.
545 545  
546 546  
547 -[[image:image-20230524110125-3.png||height="768" width="1115"]]
515 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/image-20220623090437-1.png?rev=1.1||alt="image-20220623090437-1.png"]]
548 548  
549 549  
550 -
551 551  == 2.7 Frequency Plans ==
552 552  
553 553  
... ... @@ -556,15 +556,9 @@
556 556  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
557 557  
558 558  
559 -== 2.8 ​Firmware Change Log ==
560 -
561 -
562 -**Firmware download link: **[[https:~~/~~/www.dropbox.com/sh/fis3g6nmhv0eokg/AAC6BcCZaX4BdqZkduUvZ3jIa?dl=0>>https://www.dropbox.com/sh/fis3g6nmhv0eokg/AAC6BcCZaX4BdqZkduUvZ3jIa?dl=0]]
563 -
564 -
565 565  = 3. Configure S31x-LB =
566 566  
567 -== 3.1 Configure Methods ==
528 +== 3.1 Configure Methods: ==
568 568  
569 569  
570 570  S31x-LB supports below configure method:
... ... @@ -573,7 +573,6 @@
573 573  * AT Command via UART Connection : See [[UART Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
574 574  * LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
575 575  
576 -
577 577  == 3.2 General Commands ==
578 578  
579 579  
... ... @@ -621,7 +621,6 @@
621 621  * Example 1: Downlink Payload: 0100001E  ~/~/  Set Transmit Interval (TDC) = 30 seconds
622 622  * Example 2: Downlink Payload: 0100003C  ~/~/  Set Transmit Interval (TDC) = 60 seconds
623 623  
624 -
625 625  === 3.3.2 Get Device Status ===
626 626  
627 627  
... ... @@ -632,9 +632,8 @@
632 632  Sensor will upload Device Status via FPORT=5. See payload section for detail.
633 633  
634 634  
635 -=== 3.3.3 Set Temperature Alarm Threshold ===
594 +=== 3.3.3 Set Temperature Alarm Threshold: ===
636 636  
637 -
638 638  * (% style="color:blue" %)**AT Command:**
639 639  
640 640  (% style="color:#037691" %)**AT+SHTEMP=min,max**
... ... @@ -649,14 +649,13 @@
649 649  
650 650  * (% style="color:blue" %)**Downlink Payload:**
651 651  
652 -(% style="color:#037691" %)**0x(0C 01 00 1E)**  (%%) ~/~/ Set AT+SHTEMP=0,30
610 +(% style="color:#037691" %)**0x(0C 01 00 1E)**  (%%) ~/~/Set AT+SHTEMP=0,30
653 653  
654 654  (% style="color:red" %)**(note: 3^^rd^^ byte= 0x00 for low limit(not set), 4^^th^^ byte = 0x1E for high limit: 30)**
655 655  
656 656  
657 -=== 3.3.4 Set Humidity Alarm Threshold ===
615 +=== 3.3.4 Set Humidity Alarm Threshold: ===
658 658  
659 -
660 660  * (% style="color:blue" %)**AT Command:**
661 661  
662 662  (% style="color:#037691" %)**AT+SHHUM=min,max**
... ... @@ -667,18 +667,17 @@
667 667  
668 668  Example:
669 669  
670 - AT+SHHUM=70,0  ~/~/ Alarm when humidity lower than 70%.
627 + AT+SHHUM=70,0   ~/~/ Alarm when humidity lower than 70%.
671 671  
672 672  * (% style="color:blue" %)**Downlink Payload:**
673 673  
674 -(% style="color:#037691" %)**0x(0C 02 46 00)**(%%)  ~/~/ Set AT+SHTHUM=70,0
631 +(% style="color:#037691" %)**0x(0C 02 46 00)**(%%)  ~/~/Set AT+SHTHUM=70,0
675 675  
676 676  (% style="color:red" %)**(note: 3^^rd^^ byte= 0x46 for low limit (70%), 4^^th^^ byte = 0x00 for high limit (not set))**
677 677  
678 678  
679 -=== 3.3.5 Set Alarm Interval ===
636 +=== 3.3.5 Set Alarm Interval: ===
680 680  
681 -
682 682  The shortest time of two Alarm packet. (unit: min)
683 683  
684 684  * (% style="color:blue" %)**AT Command:**
... ... @@ -690,7 +690,7 @@
690 690  (% style="color:#037691" %)**0x(0D 00 1E)**(%%)     **~-~--> ** Set AT+ATDC=0x 00 1E = 30 minutes
691 691  
692 692  
693 -=== 3.3.6 Get Alarm settings ===
649 +=== 3.3.6 Get Alarm settings  （什么FPORT?） ===
694 694  
695 695  
696 696  Send a LoRaWAN downlink to ask device send Alarm settings.
... ... @@ -699,24 +699,22 @@
699 699  
700 700  **Example:**
701 701  
702 -[[image:image-20230524110211-4.png]]
658 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/1655948182791-225.png?rev=1.1||alt="1655948182791-225.png"]]
703 703  
660 +
704 704  **Explain:**
705 705  
706 706  * Alarm & MOD bit is 0x7C, 0x7C >> 2 = 0x31: Means this message is the Alarm settings message.
707 707  
708 -
709 709  === 3.3.7 Set Interrupt Mode ===
710 710  
711 711  
712 -Feature, Set Interrupt mode for PA8 of pin.
668 +Feature, Set Interrupt mode for GPIO_EXIT.
713 713  
714 -When AT+INTMOD=0 is set, PA8 is used as a digital input port.
715 -
716 716  (% style="color:blue" %)**AT Command: AT+INTMOD**
717 717  
718 718  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
719 -|=(% style="width: 155px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3" %)**Response**
673 +|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
720 720  |(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
721 721  0
722 722  OK
... ... @@ -739,36 +739,6 @@
739 739  * Example 1: Downlink Payload: 06000000  ~/~/  Turn off interrupt mode
740 740  * Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
741 741  
742 -
743 -=== 3.3.8 Set Power Output Duration ===
744 -
745 -
746 -Control the output duration 5V . Before each sampling, device will
747 -
748 -~1. first enable the power output to external sensor,
749 -
750 -2. keep it on as per duration, read sensor value and construct uplink payload
751 -
752 -3. final, close the power output.
753 -
754 -(% style="color:blue" %)**AT Command: AT+5VT**
755 -
756 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
757 -|=(% style="width: 155px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3" %)**Response**
758 -|(% style="width:154px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:157px" %)0 (default)
759 -OK
760 -|(% style="width:154px" %)AT+5VT=500|(% style="width:196px" %)Close after a delay of 1000 milliseconds.|(% style="width:157px" %)OK
761 -
762 -(% style="color:blue" %)**Downlink Command: 0x07**
763 -
764 -Format: Command Code (0x07) followed by 2 bytes.
765 -
766 -The first and second bytes are the time to turn on.
767 -
768 -* Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
769 -* Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
770 -
771 -
772 772  = 4. Battery & Power Consumption =
773 773  
774 774  
... ... @@ -787,15 +787,14 @@
787 787  * Update with new features.
788 788  * Fix bugs.
789 789  
790 -Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/kwqv57tp6pejias/AAAopYMATh1GM6fZ-VRCLrpDa?dl=0]]**
714 +Firmware and changelog can be downloaded from : **[[Firmware download link>>https://www.dropbox.com/sh/kwqv57tp6pejias/AAAopYMATh1GM6fZ-VRCLrpDa?dl=0]]**
791 791  
792 792  
793 793  Methods to Update Firmware:
794 794  
795 -* (Recommanded way) OTA firmware update via wireless:   [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
796 -* Update through UART TTL interface. **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
719 +* (Recommanded way) OTA firmware update via wireless: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
720 +* Update through UART TTL interface. **[[Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
797 797  
798 -
799 799  = 6. FAQ =
800 800  
801 801  
... ... @@ -803,7 +803,7 @@
803 803  = 7. Order Info =
804 804  
805 805  
806 -Part Number: (% style="color:blue" %)**S31-LB-XX  / S31B-LB-XX**
729 +Part Number: (% style="color:blue" %)**S31-LB-XX  / S31B-LB-XX**
807 807  
808 808  (% style="color:red" %)**XX**(%%): The default frequency band
809 809  
... ... @@ -823,7 +823,6 @@
823 823  
824 824  * (% style="color:red" %)**CN470**(%%): LoRaWAN CN470 band
825 825  
826 -
827 827  = 8. ​Packing Info =
828 828  
829 829  
... ... @@ -841,10 +841,9 @@
841 841  
842 842  * Weight / pcs : g
843 843  
844 -
845 845  = 9. Support =
846 846  
847 847  
848 848  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
849 849  
850 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[Support@dragino.cc>>mailto:Support@dragino.cc]].
771 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
1682646494051-944.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -206.9 KB
Content
S31-B.jpg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ellie
Size
... ... @@ -1,1 +1,0 @@
1 -28.3 KB
Content
S31.jpg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ellie
Size
... ... @@ -1,1 +1,0 @@
1 -58.7 KB
Content
S31B.jpg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ellie
Size
... ... @@ -1,1 +1,0 @@
1 -40.5 KB
Content
image-20230421162630-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -23.5 KB
Content
image-20230421171614-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.8 KB
Content
image-20230426084152-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -190.0 KB
Content
image-20230523174230-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -605.9 KB
Content
image-20230524105433-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -121.4 KB
Content
image-20230524105747-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -223.2 KB
Content
image-20230524110125-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -194.1 KB
Content
image-20230524110211-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -110.1 KB
Content
image-20230524114302-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -12.0 KB
Content
image-20230524114654-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -17.8 KB
Content
image-20230524114826-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -82.3 KB
Content
image-20230524144422-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -34.9 KB
Content
image-20230524144456-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -33.9 KB
Content
image-20230527093155-1.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -9.3 KB
Content
image-20230527093214-2.jpeg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -14.7 KB
Content