Skip to Content
Last modified by Mengting Qiu on 2025/07/01 15:58
From version 55.1
edited by Saxer Lin
on 2023/05/24 11:56
Change comment: There is no comment for this version
To version 17.1
edited by kai
on 2023/04/23 15:13
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Saxer
1 +XWiki.kai
Content
... ... @@ -1,9 +1,6 @@
1 -(% style="text-align:center" %)
2 -[[image:S31-B.jpg]]
1 +
3 3  
4 4  
5 -
6 -
7 7  **Table of Contents：**
8 8  
9 9  {{toc/}}
... ... @@ -18,24 +18,41 @@
18 18  == 1.1 What is S31x-LB LoRaWAN Temperature & Humidity Sensor ==
19 19  
20 20  
21 -The Dragino S31x-LB is a (% style="color:blue" %)**LoRaWAN Temperature and Humidity Sensor**(%%) for Internet of Things solution. It is used to measure the (% style="color:blue" %)**surrounding environment temperature and relative air humidity precisely**(%%), and then upload to IoT server via LoRaWAN wireless protocol.
18 +(((
19 +The Dragino S31x-LB is a (% style="color:blue" %)**LoRaWAN Temperature and Humidity Sensor**(%%) for Internet of Things solution. It is used to measure the (% style="color:blue" %)**surrounding environment temperature and relative air humidity precisely**(%%), and then upload to IoT server via LoRaWAN wireless protocol.
20 +)))
22 22  
23 -The temperature & humidity sensor used in S31x-LB is SHT31, which is fully calibrated, linearized, and temperature compensated digital output from Sensirion, it provides a strong reliability and long-term stability. The SHT31 is fixed in a (% style="color:blue" %)**waterproof anti-condensation casing**(%%) for long term use.
22 +(((
23 +The temperature & humidity sensor used in S31x-LB is SHT31, which is fully calibrated, linearized, and temperature compensated digital output from Sensirion, it provides a strong reliability and long-term stability. The SHT31 is fixed in a (% style="color:blue" %)**waterproof anti-condensation casing**(%%) for long term use.
24 +)))
24 24  
26 +(((
25 25  The LoRa wireless technology used in S31x-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
28 +)))
26 26  
27 -S31x-LB supports (% style="color:blue" %)**Temperature & Humdity alarm feature**(%%), user can set temperature alarm for instant notice. S31x-LB supports Datalog feature, it can save the data when there is no LoRaWAN network and uplink when network recover.
30 +(((
31 +S31x-LB supports (% style="color:blue" %)**Temperature & Humdity alarm feature,**(%%) user can set temperature alarm for instant notice. S31x-LB supports Datalog feature, it can save the data when there is no LoRaWAN network and uplink when network recover.
32 +)))
28 28  
29 -S31x-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
34 +(((
35 +S31x-LB has max 3 probes which measure maximum 3 temperature points.
36 +)))
30 30  
31 -S31x-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
38 +(((
39 +S31x-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
40 +)))
32 32  
42 +(((
43 +S31x-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
44 +)))
45 +
46 +(((
33 33  Each S31x-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
48 +)))
34 34  
35 35  
36 36  == 1.2 ​Features ==
37 37  
38 -
39 39  * LoRaWAN 1.0.3 Class A
40 40  * Ultra-low power consumption
41 41  * External 3 meters SHT31 probe (For S31-LB)
... ... @@ -132,19 +132,12 @@
132 132  If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
133 133  
134 134  
135 -== 1.7 Pin Definitions ==
149 +== 1.7  Hardware Variant ==
136 136  
137 -[[image:image-20230523174230-1.png]]
138 138  
139 -
140 -== 1.8 Hardware Variant ==
141 -
142 -
143 143  (% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
144 144  |=(% style="width: 102px;background-color:#D9E2F3;color:#0070C0" %)Model|=(% style="width: 190px;background-color:#D9E2F3;color:#0070C0" %)Photo|=(% style="width: 218px;background-color:#D9E2F3;color:#0070C0" %)Probe Info
145 -|(% style="width:102px" %)(((
146 -S31-LB
147 -)))|(% style="width:190px" %)[[image:S31.jpg]]|(% style="width:297px" %)(((
154 +|(% style="width:102px" %)S31-LB|(% style="width:190px" %) |(% style="width:297px" %)(((
148 148  1 x SHT31 Probe
149 149  
150 150  Cable Length : 2 meters
... ... @@ -151,9 +151,7 @@
151 151  
152 152  
153 153  )))
154 -|(% style="width:102px" %)(((
155 -S31B-LB
156 -)))|(% style="width:190px" %)[[image:S31B.jpg]]|(% style="width:297px" %)(((
161 +|(% style="width:102px" %)S31B-LB|(% style="width:190px" %) |(% style="width:297px" %)(((
157 157  1 x SHT31 Probe
158 158  
159 159  Installed in device.
... ... @@ -163,7 +163,7 @@
163 163  
164 164  
165 165  
166 -== 1.9 Mechanical ==
171 +== 1.8 Mechanical ==
167 167  
168 168  
169 169  [[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
... ... @@ -188,6 +188,7 @@
188 188  
189 189  Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
190 190  
196 +
191 191  The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
192 192  
193 193  
... ... @@ -195,9 +195,10 @@
195 195  
196 196  Each S31x-LB is shipped with a sticker with the default device EUI as below:
197 197  
198 -[[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
204 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220607170145-1.jpeg?rev=1.1||alt="image-20220607170145-1.jpeg"]]
199 199  
200 200  
207 +
201 201  You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
202 202  
203 203  
... ... @@ -208,18 +208,18 @@
208 208  
209 209  (% style="color:blue" %)**Add APP EUI and DEV EUI**
210 210  
211 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-4.png?width=753&height=551&rev=1.1||alt="图片-20220611161308-4.png"]]
218 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-4.png?width=753&height=551&rev=1.1||alt="image-20220611161308-4.png"]]
212 212  
213 213  
214 214  (% style="color:blue" %)**Add APP EUI in the application**
215 215  
216 216  
217 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-5.png?width=742&height=601&rev=1.1||alt="图片-20220611161308-5.png"]]
224 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-5.png?width=742&height=601&rev=1.1||alt="image-20220611161308-5.png"]]
218 218  
219 219  
220 220  (% style="color:blue" %)**Add APP KEY**
221 221  
222 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
229 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="image-20220611161308-6.png"]]
223 223  
224 224  
225 225  (% style="color:blue" %)**Step 2:**(%%) Activate on S31x-LB
... ... @@ -249,7 +249,7 @@
249 249  
250 250  Example parse in TTNv3
251 251  
252 -[[image:image-20230421171614-1.png||alt="图片-20230421171614-1.png"]]
259 +[[image:image-20230421171614-1.png]]
253 253  
254 254  
255 255  (% style="color:#037691" %)**Sensor Model**(%%): For S31x-LB, this value is 0x0A
... ... @@ -310,26 +310,20 @@
310 310  
311 311  Sensor Data is uplink via FPORT=2
312 312  
313 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:700px" %)
320 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
314 314  |=(% style="width: 90px;background-color:#D9E2F3" %)(((
315 315  **Size(bytes)**
316 -)))|=(% style="width: 80px;background-color:#D9E2F3" %)2|=(% style="width: 90px;background-color:#D9E2F3" %)4|=(% style="width: 194px; background-color: rgb(217, 226, 243);" %)1|=(% style="width: 106px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 97px; background-color: rgb(217, 226, 243);" %)2
323 +)))|=(% style="width: 80px;background-color:#D9E2F3" %)2|=(% style="width: 90px;background-color:#D9E2F3" %)4|=(% style="width:80px;background-color:#D9E2F3" %)1|=(% style="width: 80px;background-color:#D9E2F3" %)**2**|=(% style="width: 80px;background-color:#D9E2F3" %)2
317 317  |(% style="width:99px" %)**Value**|(% style="width:69px" %)(((
318 -[[Battery>>||anchor="HBattery"]]
325 +[[Battery>>||anchor="HBattery:"]]
319 319  )))|(% style="width:130px" %)(((
320 320  [[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
321 -)))|(% style="width:194px" %)(((
322 -[[Alarm Flag&>>Alarm Flag& MOD& Level of PA8]]
323 -
324 -[[MOD&>>Alarm Flag& MOD& Level of PA8]]
325 -
326 -[[Level of PA8>>Alarm Flag& MOD& Level of PA8]]
327 -
328 -
329 -)))|(% style="width:106px" %)(((
330 -[[Temperature>>||anchor="HTemperature"]]
331 -)))|(% style="width:97px" %)(((
332 -[[Humidity>>||anchor="HHumidity"]]
328 +)))|(% style="width:91px" %)(((
329 +[[Alarm Flag>>||anchor="HAlarmFlag26MOD:"]]
330 +)))|(% style="width:103px" %)(((
331 +[[Temperature>>||anchor="HTemperature:"]]
332 +)))|(% style="width:80px" %)(((
333 +[[Humidity>>||anchor="HHumidity:"]]
333 333  )))
334 334  
335 335  ==== (% style="color:#4472c4" %)**Battery**(%%) ====
... ... @@ -359,21 +359,17 @@
359 359  Read:0x(0197)=412    Value:  412 / 10=41.2, So 41.2%
360 360  
361 361  
362 -==== (% style="color:#4472c4" %)**Alarm Flag & MOD & Level of PA8**(%%) ====
363 +==== (% style="color:#4472c4" %)**Alarm Flag& MOD**(%%) ====
363 363  
364 364  
365 365  **Example:**
366 366  
367 -If payload & 0x01 = 0x01  **~-~->** This is an Alarm Message.It means that the temperature and humidity exceed the alarm value or trigger an interrupt.
368 +If payload & 0x01 = 0x01  **~-~->** This is an Alarm Message
368 368  
369 -If payload & 0x01 = 0x00  **~-~->** This is a normal uplink message, no alarm.
370 +If payload & 0x01 = 0x00  **~-~->** This is a normal uplink message, no alarm
370 370  
371 -If payload & 0x80>>7 = 0x01  **~-~->** The PA8 is low level.
372 +If payload >> 2 = 0x00  **~-~->**  means MOD=1, This is a sampling uplink message
372 372  
373 -If payload & 0x80>>7 =0x00  **~-~->** The PA8 is high level.
374 -
375 -If payload >> 2 = 0x00  **~-~->**  means MOD=1, This is a sampling uplink message.
376 -
377 377  If payload >> 2 = 0x31  **~-~->**  means MOD=31, this message is a reply message for polling, this message contains the alarm settings. see [[this link>>path:#HPolltheAlarmsettings:]] for detail. 
378 378  
379 379  
... ... @@ -384,7 +384,7 @@
384 384  
385 385  In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from:
386 386  
387 -[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/S31-LB%26S31B-LB>>https://github.com/dragino/dragino-end-node-decoder/tree/main/S31-LB%26S31B-LB]]
384 +[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/LSN50v2-S31%26S31B >>https://github.com/dragino/dragino-end-node-decoder/tree/main/LSN50v2-S31%26S31B]]
388 388  
389 389  
390 390  == 2.5 Datalog Feature ==
... ... @@ -396,34 +396,28 @@
396 396  === 2.5.1 Ways to get datalog via LoRaWAN ===
397 397  
398 398  
399 -Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayload28FPORT3D329"]], S31x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
396 +Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayloadA028FPORT3D329"]], S31x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
400 400  
401 -* (((
402 -a) S31x-LB will do an ACK check for data records sending to make sure every data arrive server.
403 -)))
404 -* (((
405 -b) S31x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB gets a ACK, S31x-LB will consider there is a network connection and resend all NONE-ACK messages.
406 -)))
398 +* a) S31x-LB will do an ACK check for data records sending to make sure every data arrive server.
399 +* b) S31x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB gets a ACK, S31x-LB will consider there is a network connection and resend all NONE-ACK messages.
407 407  
408 408  Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
409 409  
410 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
403 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="image-20220703111700-2.png" height="381" width="1119"]]
411 411  
412 -
413 413  === 2.5.2 Unix TimeStamp ===
414 414  
415 415  
416 416  S31x-LB uses Unix TimeStamp format based on
417 417  
418 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
410 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="image-20220523001219-11.png" height="97" width="627"]]
419 419  
420 420  User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
421 421  
422 422  Below is the converter example
423 423  
424 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="图片-20220523001219-12.png" height="298" width="720"]]
416 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="image-20220523001219-12.png" height="298" width="720"]]
425 425  
426 -
427 427  So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
428 428  
429 429  
... ... @@ -432,7 +432,7 @@
432 432  
433 433  User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
434 434  
435 -Once S31x-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to S31x-LB. If S31x-LB fails to get the time from the server, S31x-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
426 +Once S31-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to S31x-LB. If S31x-LB fails to get the time from the server, S31x-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
436 436  
437 437  (% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
438 438  
... ... @@ -444,35 +444,18 @@
444 444  
445 445  **Retrieval data payload:**
446 446  
447 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:680px" %)
438 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
448 448  |=(% style="width: 80px;background-color:#D9E2F3" %)(((
449 449  **Size(bytes)**
450 -)))|=(% style="width: 68px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 104px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 87px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 178px; background-color: rgb(217, 226, 243);" %)**1**|=(% style="width: 137px; background-color: rgb(217, 226, 243);" %)**4**
451 -|(% style="width:103px" %)**Value**|(% style="width:68px" %)(((
452 -ignore
453 -)))|(% style="width:104px" %)(((
454 -(((
455 -Humidity
456 -)))
441 +)))|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 120px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 103px; background-color: rgb(217, 226, 243);" %)**1**|=(% style="width: 85px; background-color: rgb(217, 226, 243);" %)**4**
442 +|(% style="width:103px" %)**Value**|(% style="width:54px" %)(((
443 +[[Temp_Black>>||anchor="HTemperatureBlack:"]]
444 +)))|(% style="width:51px" %)[[Temp_White>>||anchor="HTemperatureWhite:"]]|(% style="width:89px" %)[[Temp_ Red or Temp _White>>||anchor="HTemperatureREDorTemperatureWhite:"]]|(% style="width:103px" %)Poll message flag & Ext|(% style="width:54px" %)[[Unix Time Stamp>>||anchor="H2.5.2UnixTimeStamp"]]
457 457  
458 -(((
459 -
460 -)))
461 -)))|(% style="width:87px" %)(((
462 -Temperature
463 -)))|(% style="width:178px" %)(((
464 -Poll message flag &
446 +**Poll message flag & Ext:**
465 465  
466 -Alarm Flag&
448 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20221006192726-1.png?width=754&height=112&rev=1.1||alt="image-20221006192726-1.png" height="112" width="754"]]
467 467  
468 -Level of PA8
469 -)))|(% style="width:137px" %)Unix Time Stamp
470 -
471 -**Poll message flag & Alarm Flag & Level of PA8:**
472 -
473 -[[image:image-20230524114302-1.png||height="115" width="736"]]
474 -
475 -
476 476  **No ACK Message**:  1: This message means this payload is fromn Uplink Message which doesn't get ACK from the server before ( for **PNACKMD=1** feature)
477 477  
478 478  **Poll Message Flag**: 1: This message is a poll message reply.
... ... @@ -493,26 +493,26 @@
493 493  
494 494  If devise doesn't have any data in the polling time. Device will uplink 11 bytes of 0   
495 495  
470 +
496 496  **Example:**
497 497  
498 498  If S31x-LB has below data inside Flash:
499 499  
500 -[[image:image-20230524114654-2.png]]
475 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523144455-1.png?width=735&height=335&rev=1.1||alt="image-20220523144455-1.png" height="335" width="735"]]
501 501  
477 +If user sends below downlink command: 3160065F9760066DA705
502 502  
503 -If user sends below downlink command: 31646D84E1646D856C05
479 +Where : Start time: 60065F97 = time 21/1/19 04:27:03
504 504  
505 -Where : Start time: 646D84E1 = time 23/5/24 03:30:41
481 + Stop time: 60066DA7= time 21/1/19 05:27:03
506 506  
507 - Stop time: 646D856C= time 23/5/24 03:33:00
508 508  
509 -
510 510  **S31x-LB will uplink this payload.**
511 511  
512 -[[image:image-20230524114826-3.png]]
486 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-13.png?width=727&height=421&rev=1.1||alt="image-20220523001219-13.png" height="421" width="727"]]
513 513  
514 514  (((
515 -00 00 02 36 01 10 40 64 6D 84 E1 00 00 02 37 01 10 40 64 6D 84 F8 00 00 02 37 01 0F 40 64 6D 85 04 00 00 02 3A 01 0F 40 64 6D 85 18 00 00 02 3C 01 0F 40 64 6D 85 36 00 00 02 3D 01 0E 40 64 6D 85 3F 00 00 02 3F 01 0E 40 64 6D 85 60 00 00 02 40 01 0E 40 64 6D 85 6A
489 +__**7FFF089801464160065F97**__ **__7FFF__ __088E__ __014B__ __41__ __60066009__** 7FFF0885014E41600660667FFF0875015141600662BE7FFF086B015541600665167FFF08660155416006676E7FFF085F015A41600669C67FFF0857015D4160066C1E
516 516  )))
517 517  
518 518  (((
... ... @@ -520,28 +520,32 @@
520 520  )))
521 521  
522 522  (((
523 -00 00 02 36 01 10 40 64 6D 84 E1
497 +7FFF089801464160065F97
524 524  )))
525 525  
526 526  (((
527 -**Hum**=0x0236/10=56.6
501 +**Ext sensor data**=0x7FFF/100=327.67
528 528  )))
529 529  
530 530  (((
531 -**Temp**=0x0110/10=27.2
505 +**Temp**=0x088E/100=22.00
532 532  )))
533 533  
534 534  (((
535 -**poll message flag & Alarm Flag & Level of PA8**=0x40,means reply data,sampling uplink message,the PA8 is low level.
509 +**Hum**=0x014B/10=32.6
536 536  )))
537 537  
538 538  (((
539 -**Unix time** is 0x646D84E1=1684899041s=23/5/24 03:30:41
513 +**poll message flag & Ext**=0x41,means reply data,Ext=1
540 540  )))
541 541  
516 +(((
517 +**Unix time** is 0x60066009=1611030423s=21/1/19 04:27:03
518 +)))
542 542  
543 -(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的
544 544  
521 +(% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||data-widget="image" draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="Click and drag to resize" %)​(% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||data-widget="image" draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="Click and drag to resize" %)​
522 +
545 545  == 2.6 Temperature Alarm Feature ==
546 546  
547 547  
... ... @@ -548,10 +548,9 @@
548 548  S31x-LB work flow with Alarm feature.
549 549  
550 550  
551 -[[image:image-20230524110125-3.png||height="768" width="1115"]]
529 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/image-20220623090437-1.png?rev=1.1||alt="image-20220623090437-1.png"]]
552 552  
553 553  
554 -
555 555  == 2.7 Frequency Plans ==
556 556  
557 557  
... ... @@ -630,7 +630,6 @@
630 630  
631 631  === 3.3.3 Set Temperature Alarm Threshold ===
632 632  
633 -
634 634  * (% style="color:blue" %)**AT Command:**
635 635  
636 636  (% style="color:#037691" %)**AT+SHTEMP=min,max**
... ... @@ -652,7 +652,6 @@
652 652  
653 653  === 3.3.4 Set Humidity Alarm Threshold ===
654 654  
655 -
656 656  * (% style="color:blue" %)**AT Command:**
657 657  
658 658  (% style="color:#037691" %)**AT+SHHUM=min,max**
... ... @@ -674,7 +674,6 @@
674 674  
675 675  === 3.3.5 Set Alarm Interval ===
676 676  
677 -
678 678  The shortest time of two Alarm packet. (unit: min)
679 679  
680 680  * (% style="color:blue" %)**AT Command:**
... ... @@ -695,8 +695,9 @@
695 695  
696 696  **Example:**
697 697  
698 -[[image:image-20230524110211-4.png]]
672 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/1655948182791-225.png?rev=1.1||alt="1655948182791-225.png"]]
699 699  
674 +
700 700  **Explain:**
701 701  
702 702  * Alarm & MOD bit is 0x7C, 0x7C >> 2 = 0x31: Means this message is the Alarm settings message.
... ... @@ -704,10 +704,8 @@
704 704  === 3.3.7 Set Interrupt Mode ===
705 705  
706 706  
707 -Feature, Set Interrupt mode for PA8 of pin.
682 +Feature, Set Interrupt mode for GPIO_EXIT.
708 708  
709 -When AT+INTMOD=0 is set, PA8 is used as a digital input port.
710 -
711 711  (% style="color:blue" %)**AT Command: AT+INTMOD**
712 712  
713 713  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
... ... @@ -734,34 +734,6 @@
734 734  * Example 1: Downlink Payload: 06000000  ~/~/  Turn off interrupt mode
735 735  * Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
736 736  
737 -=== 3.3.8 Set Power Output Duration ===
738 -
739 -
740 -Control the output duration 5V . Before each sampling, device will
741 -
742 -~1. first enable the power output to external sensor,
743 -
744 -2. keep it on as per duration, read sensor value and construct uplink payload
745 -
746 -3. final, close the power output.
747 -
748 -(% style="color:blue" %)**AT Command: AT+5VT**
749 -
750 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
751 -|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
752 -|(% style="width:154px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:157px" %)0 (default)
753 -OK
754 -|(% style="width:154px" %)AT+5VT=500|(% style="width:196px" %)Close after a delay of 1000 milliseconds.|(% style="width:157px" %)OK
755 -
756 -(% style="color:blue" %)**Downlink Command: 0x07**
757 -
758 -Format: Command Code (0x07) followed by 2 bytes.
759 -
760 -The first and second bytes are the time to turn on.
761 -
762 -* Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
763 -* Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
764 -
765 765  = 4. Battery & Power Consumption =
766 766  
767 767  
... ... @@ -780,13 +780,13 @@
780 780  * Update with new features.
781 781  * Fix bugs.
782 782  
783 -Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/kwqv57tp6pejias/AAAopYMATh1GM6fZ-VRCLrpDa?dl=0]]**
728 +Firmware and changelog can be downloaded from : **[[Firmware download link>>https://www.dropbox.com/sh/kwqv57tp6pejias/AAAopYMATh1GM6fZ-VRCLrpDa?dl=0]]**
784 784  
785 785  
786 786  Methods to Update Firmware:
787 787  
788 -* (Recommanded way) OTA firmware update via wireless:   [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
789 -* Update through UART TTL interface. **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
733 +* (Recommanded way) OTA firmware update via wireless: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
734 +* Update through UART TTL interface. **[[Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
790 790  
791 791  = 6. FAQ =
792 792  
... ... @@ -795,7 +795,7 @@
795 795  = 7. Order Info =
796 796  
797 797  
798 -Part Number: (% style="color:blue" %)**S31-LB-XX  / S31B-LB-XX**
743 +Part Number: (% style="color:blue" %)**S31-LB-XX  / S31B-LB-XX**
799 799  
800 800  (% style="color:red" %)**XX**(%%): The default frequency band
801 801  
... ... @@ -837,4 +837,4 @@
837 837  
838 838  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
839 839  
840 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[Support@dragino.cc>>mailto:Support@dragino.cc]].
785 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
1682646494051-944.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -206.9 KB
Content
S31-B.jpg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ellie
Size
... ... @@ -1,1 +1,0 @@
1 -28.3 KB
Content
S31.jpg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ellie
Size
... ... @@ -1,1 +1,0 @@
1 -58.7 KB
Content
S31B.jpg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ellie
Size
... ... @@ -1,1 +1,0 @@
1 -40.5 KB
Content
image-20230426084152-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -190.0 KB
Content
image-20230523174230-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -605.9 KB
Content
image-20230524105433-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -121.4 KB
Content
image-20230524105747-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -223.2 KB
Content
image-20230524110125-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -194.1 KB
Content
image-20230524110211-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -110.1 KB
Content
image-20230524114302-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -12.0 KB
Content
image-20230524114654-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -17.8 KB
Content
image-20230524114826-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -82.3 KB
Content