Skip to Content
Last modified by Mengting Qiu on 2025/07/01 15:58
From version 46.1
edited by Saxer Lin
on 2023/05/24 10:50
Change comment: There is no comment for this version
To version 5.1
edited by Edwin Chen
on 2023/04/16 13:14
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Saxer
1 +XWiki.Edwin
Content
... ... @@ -1,9 +1,6 @@
1 -(% style="text-align:center" %)
2 -[[image:S31-B.jpg]]
1 +
3 3  
4 4  
5 -
6 -
7 7  **Table of Contents：**
8 8  
9 9  {{toc/}}
... ... @@ -18,24 +18,25 @@
18 18  == 1.1 What is S31x-LB LoRaWAN Temperature & Humidity Sensor ==
19 19  
20 20  
21 -The Dragino S31x-LB is a (% style="color:blue" %)**LoRaWAN Temperature and Humidity Sensor**(%%) for Internet of Things solution. It is used to measure the (% style="color:blue" %)**surrounding environment temperature and relative air humidity precisely**(%%), and then upload to IoT server via LoRaWAN wireless protocol.
18 +The Dragino S31x-LB is a (% style="color:blue" %)**LoRaWAN Temperature and Humidity Sensor**(%%) for Internet of Things solution. It is used to measure the (% style="color:blue" %)**surrounding environment temperature and relative air humidity precisely**(%%), and then upload to IoT server via LoRaWAN wireless protocol.
22 22  
23 -The temperature & humidity sensor used in S31x-LB is SHT31, which is fully calibrated, linearized, and temperature compensated digital output from Sensirion, it provides a strong reliability and long-term stability. The SHT31 is fixed in a (% style="color:blue" %)**waterproof anti-condensation casing**(%%) for long term use.
20 +The temperature & humidity sensor used in S31x-LB is SHT31, which is fully calibrated, linearized, and temperature compensated digital output from Sensirion, it provides a strong reliability and long-term stability. The SHT31 is fixed in a (% style="color:blue" %)**waterproof anti-condensation casing**(%%) for long term use.
24 24  
25 25  The LoRa wireless technology used in S31x-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
26 26  
27 -S31x-LB supports (% style="color:blue" %)**Temperature & Humdity alarm feature**(%%), user can set temperature alarm for instant notice. S31x-LB supports Datalog feature, it can save the data when there is no LoRaWAN network and uplink when network recover.
24 +S31x-LB supports (% style="color:blue" %)**Temperature & Humdity alarm feature,**(%%) user can set temperature alarm for instant notice. S31x-LB supports Datalog feature, it can save the data when there is no LoRaWAN network and uplink when network recover.
28 28  
29 -S31x-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
26 +S31x-LB has max 3 probes which measure maximum 3 temperature points.
30 30  
31 -S31x-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
28 +S31x-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
32 32  
30 +S31x-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
31 +
33 33  Each S31x-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
34 34  
35 35  
36 36  == 1.2 ​Features ==
37 37  
38 -
39 39  * LoRaWAN 1.0.3 Class A
40 40  * Ultra-low power consumption
41 41  * External 3 meters SHT31 probe (For S31-LB)
... ... @@ -101,11 +101,11 @@
101 101  == 1.5 Button & LEDs ==
102 102  
103 103  
104 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675071855856-879.png]]
102 +[[image:1675071855856-879.png]]
105 105  
106 106  
107 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
108 -|=(% style="width: 167px;background-color:#D9E2F3;color:#0070C0" %)**Behavior on ACT**|=(% style="width: 117px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 225px;background-color:#D9E2F3;color:#0070C0" %)**Action**
105 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
106 +|=(% style="width: 167px;" %)**Behavior on ACT**|=(% style="width: 117px;" %)**Function**|=(% style="width: 225px;" %)**Action**
109 109  |(% style="width:167px" %)Pressing ACT between 1s < time < 3s|(% style="width:117px" %)Send an uplink|(% style="width:225px" %)(((
110 110  If sensor is already Joined to LoRaWAN network, sensor will send an uplink packet, (% style="color:blue" %)**blue led** (%%)will blink once.
111 111  Meanwhile, BLE module will be active and user can connect via BLE to configure device.
... ... @@ -115,12 +115,12 @@
115 115  (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
116 116  Once sensor is active, BLE module will be active and user can connect via BLE to configure device, no matter if device join or not join LoRaWAN network.
117 117  )))
118 -|(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means device is in Deep Sleep Mode.
116 +|(% style="width:167px" %)Fast press ACT 5 times.|(% style="width:117px" %)Deactivate Device|(% style="width:225px" %)(% style="color:red" %)**Red led**(%%) will solid on for 5 seconds. Means D2x-LB is in Deep Sleep Mode.
119 119  
120 120  == 1.6 BLE connection ==
121 121  
122 122  
123 -S31x-LB support BLE remote configure.
121 +D2x-LB support BLE remote configure.
124 124  
125 125  
126 126  BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
... ... @@ -132,31 +132,33 @@
132 132  If there is no activity connection on BLE in 60 seconds, sensor will shut down BLE module to enter low power mode.
133 133  
134 134  
135 -== 1.7 Pin Definitions ==
133 +== 1.7  Hardware Variant ==
136 136  
137 -[[image:image-20230523174230-1.png]]
138 138  
136 +(% border="1" cellspacing="10" style="background-color:#f7faff; width:510px" %)
137 +|=(% style="width: 102px;" %)Model|=(% style="width: 190px;" %)Photo|=(% style="width: 297px;" %)Probe Info
138 +|(% style="width:102px" %)**D20-LB**|(% style="width:190px" %) |(% style="width:297px" %)(((
139 +1 x DS28B20 Probe
139 139  
140 -== 1.8 Hardware Variant ==
141 -
142 -
143 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
144 -|=(% style="width: 102px;background-color:#D9E2F3;color:#0070C0" %)Model|=(% style="width: 190px;background-color:#D9E2F3;color:#0070C0" %)Photo|=(% style="width: 218px;background-color:#D9E2F3;color:#0070C0" %)Probe Info
145 -|(% style="width:102px" %)(((
146 -S31-LB
147 -)))|(% style="width:190px" %)[[image:S31.jpg]]|(% style="width:297px" %)(((
148 -1 x SHT31 Probe
149 -
150 150  Cable Length : 2 meters
151 151  
152 152  
153 153  )))
145 +|(% style="width:102px" %)**D22-LB**|(% style="width:190px" %) |(% style="width:297px" %)(((
146 +2 x DS28B20 Probes
147 +
148 +Cable lengths total 1.5meters per probe
149 +
150 +Cable Drawing: [[See This Link>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSN50v2-D20/Cable_Drawing/&file=CAB0-35IC-K21G-210811.pdf]]
151 +)))
154 154  |(% style="width:102px" %)(((
155 -S31B-LB
156 -)))|(% style="width:190px" %)[[image:S31B.jpg]]|(% style="width:297px" %)(((
157 -1 x SHT31 Probe
153 + **D23-LB**
154 +)))|(% style="width:190px" %) |(% style="width:297px" %)(((
155 +3 x DS28B20 Probes
158 158  
159 -Installed in device.
157 +Cable lengths total 1.5meters per probe
158 +
159 +Cable Drawing: [[See This Link>>url:https://www.dragino.com/downloads/index.php?dir=LoRa_End_Node/LSN50v2-D20/Cable_Drawing/&file=CAB0-35IC-K31G-210811.pdf]]
160 160  )))
161 161  
162 162  (% style="display:none" %)
... ... @@ -163,24 +163,24 @@
163 163  
164 164  
165 165  
166 -== 1.9 Mechanical ==
166 +== 1.8 Mechanical ==
167 167  
168 168  
169 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143884058-338.png]]
169 +[[image:1675143884058-338.png]]
170 170  
171 171  
172 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143899218-599.png]]
172 +[[image:1675143899218-599.png]]
173 173  
174 174  
175 -[[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
175 +[[image:1675143909447-639.png]]
176 176  
177 177  
178 -= 2. Configure S31x-LB to connect to LoRaWAN network =
178 += 2. Configure D2x-LB to connect to LoRaWAN network =
179 179  
180 180  == 2.1 How it works ==
181 181  
182 182  
183 -The S31x-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the S31x-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
183 +The D2x-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the D2x-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
184 184  
185 185  
186 186  == 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
... ... @@ -188,45 +188,49 @@
188 188  
189 189  Following is an example for how to join the [[TTN v3 LoRaWAN Network>>url:https://console.cloud.thethings.network/]]. Below is the network structure; we use the [[LPS8v2>>url:https://www.dragino.com/products/lora-lorawan-gateway/item/228-lps8v2.html]] as a LoRaWAN gateway in this example.
190 190  
191 +
192 +[[image:1675144005218-297.png]]
193 +
194 +
191 191  The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
192 192  
193 193  
194 -(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from S31x-LB.
198 +(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from D2x-LB.
195 195  
196 -Each S31x-LB is shipped with a sticker with the default device EUI as below:
200 +Each D2x-LB is shipped with a sticker with the default device EUI as below:
197 197  
198 -[[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
202 +[[image:image-20230131134744-2.jpeg]]
199 199  
200 200  
205 +
201 201  You can enter this key in the LoRaWAN Server portal. Below is TTN screen shot:
202 202  
203 203  
204 204  (% style="color:blue" %)**Register the device**
205 205  
206 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/1654935135620-998.png?rev=1.1||alt="1654935135620-998.png"]]
211 +[[image:1675144099263-405.png]]
207 207  
208 208  
209 209  (% style="color:blue" %)**Add APP EUI and DEV EUI**
210 210  
211 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-4.png?width=753&height=551&rev=1.1||alt="图片-20220611161308-4.png"]]
216 +[[image:1675144117571-832.png]]
212 212  
213 213  
214 214  (% style="color:blue" %)**Add APP EUI in the application**
215 215  
216 216  
217 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-5.png?width=742&height=601&rev=1.1||alt="图片-20220611161308-5.png"]]
222 +[[image:1675144143021-195.png]]
218 218  
219 219  
220 220  (% style="color:blue" %)**Add APP KEY**
221 221  
222 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
227 +[[image:1675144157838-392.png]]
223 223  
229 +(% style="color:blue" %)**Step 2:**(%%) Activate on D2x-LB
224 224  
225 -(% style="color:blue" %)**Step 2:**(%%) Activate on S31x-LB
226 226  
232 +Press the button for 5 seconds to activate the D2x-LB.
227 227  
228 -Press the button for 5 seconds to activate the S31x-LB.
229 -
230 230  (% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
231 231  
232 232  After join success, it will start to upload messages to TTN and you can see the messages in the panel.
... ... @@ -237,22 +237,22 @@
237 237  === 2.3.1 Device Status, FPORT~=5 ===
238 238  
239 239  
240 -Users can use the downlink command(**0x26 01**) to ask S31x-LB to send device configure detail, include device configure status. S31x-LB will uplink a payload via FPort=5 to server.
244 +Users can use the downlink command(**0x26 01**) to ask D2x-LB to send device configure detail, include device configure status. D2x-LB will uplink a payload via FPort=5 to server.
241 241  
242 242  The Payload format is as below.
243 243  
244 244  
245 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
246 -|(% colspan="6" style="background-color:#d9e2f3; color:#0070c0" %)**Device Status (FPORT=5)**
249 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
250 +|(% colspan="6" %)**Device Status (FPORT=5)**
247 247  |(% style="width:103px" %)**Size (bytes)**|(% style="width:72px" %)**1**|**2**|(% style="width:91px" %)**1**|(% style="width:86px" %)**1**|(% style="width:44px" %)**2**
248 248  |(% style="width:103px" %)**Value**|(% style="width:72px" %)Sensor Model|Firmware Version|(% style="width:91px" %)Frequency Band|(% style="width:86px" %)Sub-band|(% style="width:44px" %)BAT
249 249  
250 250  Example parse in TTNv3
251 251  
252 -[[image:image-20230421171614-1.png||alt="图片-20230421171614-1.png"]]
256 +[[image:image-20230415153147-2.png||height="220" width="1120"]]
253 253  
254 254  
255 -(% style="color:#037691" %)**Sensor Model**(%%): For S31x-LB, this value is 0x0A
259 +(% style="color:#037691" %)**Sensor Model**(%%): For D2x-LB, this value is 0x19
256 256  
257 257  (% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
258 258  
... ... @@ -308,32 +308,54 @@
308 308  === 2.3.2  Sensor Data. FPORT~=2 ===
309 309  
310 310  
311 -Sensor Data is uplink via FPORT=2
315 +D2x-LB will uplink below payload via FPORT=2 after Joined LoRaWAN Network.
312 312  
313 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:700px" %)
314 -|=(% style="width: 90px;background-color:#D9E2F3" %)(((
315 -**Size(bytes)**
316 -)))|=(% style="width: 80px;background-color:#D9E2F3" %)2|=(% style="width: 90px;background-color:#D9E2F3" %)4|=(% style="width: 194px; background-color: rgb(217, 226, 243);" %)1|=(% style="width: 106px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 97px; background-color: rgb(217, 226, 243);" %)2
317 -|(% style="width:99px" %)**Value**|(% style="width:69px" %)(((
318 -[[Battery>>||anchor="HBattery"]]
319 -)))|(% style="width:130px" %)(((
320 -[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
321 -)))|(% style="width:194px" %)(((
322 -[[Alarm Flag>>||anchor="HAlarmFlag26MOD"]][[&>>Alarm Flag& MOD& Digital Interrupt(PA8)]]
317 +(% border="1" cellspacing="10" style="background-color:#ffffcc; color:green; width:500px" %)
318 +|=(% style="width: 62.5px;" %)(((
319 +**Size (bytes)**
320 +)))|=(% style="width: 60px;" %)2|=(% style="width: 120px;" %)2|=(% style="width: 60px;" %)2|=(% style="width: 65px;" %)1|=(% style="width: 65px;" %)**2**|=(% style="width: 65px;" %)2
321 +|(% style="width:65px" %)**Value**|(((
322 +[[Battery>>||anchor="HBattery:"]]
323 +)))|(% style="width:91px" %)(((
324 +[[Temp_ Red or Temp _White>>||anchor="HTemperatureREDorTemperatureWhite:"]]
325 +)))|(% style="width:61px" %)(((
326 +ignore
327 +)))|(% style="width:91px" %)(((
328 +[[Alarm Flag>>||anchor="HAlarmFlag26MOD:"]]
329 +)))|(% style="width:99px" %)(((
330 +[[Temp_White>>||anchor="HTemperatureWhite:"]]
331 +)))|(% style="width:97px" %)(((
332 +[[Temp_Black>>||anchor="HTemperatureBlack:"]]
323 323  
324 -[[MOD&>>Alarm Flag& MOD& Digital Interrupt(PA8)]]
325 -
326 -[[Digital Interrupt(PA8)>>Alarm Flag& MOD& Digital Interrupt(PA8)]]
327 -
328 328  
329 -)))|(% style="width:106px" %)(((
330 -[[Temperature>>||anchor="HTemperature"]]
331 -)))|(% style="width:97px" %)(((
332 -[[Humidity>>||anchor="HHumidity"]]
333 333  )))
334 334  
335 -==== (% style="color:#4472c4" %)**2.3.2.1 Battery**(%%) ====
337 +**Payload per each model.**
336 336  
339 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/image-20220916152530-2.png?rev=1.1||alt="image-20220916152530-2.png" height="240" width="901"]]
340 +
341 +
342 +[[image:image-20230415154139-3.png||height="215" width="1179"]]
343 +
344 +
345 +==== (% style="color:#4472c4" %)**Decode corresponding probe color：**(%%) ====
346 +
347 +**D20:**
348 +
349 +Red <~-~-> C1
350 +
351 +**D22:**
352 +
353 +White <~-~-> C1 Red <~-~-> C2
354 +
355 +**D23:**
356 +
357 +White <~-~->C1 Red <~-~-> C2 Black <~-~-> C3
358 +
359 +
360 +
361 +==== (% style="color:#4472c4" %)**Battery:**(%%) ====
362 +
337 337  Sensor Battery Level.
338 338  
339 339  Ex1: 0x0B45 = 2885mV
... ... @@ -342,8 +342,10 @@
342 342  
343 343  
344 344  
345 -==== (% style="color:#4472c4" %)**2.3.2.2 Temperature**(%%) ====
371 +==== (% style="color:#4472c4" %)**Temperature RED or Temperature White :**(%%) ====
346 346  
373 +**This point to the Red probe in D20-LB or the probe of D22-LB/D23-LB White**
374 +
347 347  **Example**:
348 348  
349 349  If payload is: 0105H:  (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
... ... @@ -353,77 +353,96 @@
353 353  （FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
354 354  
355 355  
356 -==== (% style="color:#4472c4" %)**2.3.2.3 Humidity**(%%) ====
357 357  
385 +==== (% style="color:#4472c4" %)**Temperature White:**(%%) ====
358 358  
359 -Read:0x(0197)=412    Value:  412 / 10=41.2, So 41.2%
360 360  
388 +**This point to the Red probe in D22-LB/D23-LB**
361 361  
362 -==== (% style="color:#4472c4" %)**2.3.2.4 Alarm Flag & MOD & Digital Interrupt**(%%) ====
363 363  
391 +**Example**:
364 364  
365 -**Example:**
393 +If payload is: 0105H:  (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
366 366  
367 -If payload & 0x01 = 0x01  **~-~->** This is an Alarm Message.It means that the temperature and humidity exceed the alarm value or trigger an interrupt.
395 +If payload is: FF3FH :  (FF3F & 8000 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
368 368  
369 -If payload & 0x01 = 0x00  **~-~->** This is a normal uplink message, no alarm.
397 +（FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
370 370  
371 -If payload & 0x80>>7 = 0x01  **~-~->** The PA8 is low level.
372 372  
373 -If payload & 0x80>>7 =0x00  **~-~->** The PA8 is high level.
374 374  
375 -If payload >> 2 = 0x00  **~-~->**  means MOD=1, This is a sampling uplink message.
401 +==== (% style="color:#4472c4" %)**Temperature Black:**(%%) ====
376 376  
377 -If payload >> 2 = 0x31  **~-~->**  means MOD=31, this message is a reply message for polling, this message contains the alarm settings. see [[this link>>path:#HPolltheAlarmsettings:]] for detail. 
378 378  
404 +**This point to the BLACK probe in D23-LB**
379 379  
380 -== 2.4 Payload Decoder file ==
381 381  
407 +**Example**:
382 382  
383 -In TTN, use can add a custom payload so it shows friendly reading
409 +If payload is: 0105H:  (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
384 384  
385 -In the page (% style="color:#037691" %)**Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder**(%%) to add the decoder from:
411 +If payload is: FF3FH :  (FF3F & 8000 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
386 386  
387 -[[https:~~/~~/github.com/dragino/dragino-end-node-decoder/tree/main/S31-LB%26S31B-LB>>https://github.com/dragino/dragino-end-node-decoder/tree/main/S31-LB%26S31B-LB]]
413 +（FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
388 388  
389 389  
390 -== 2.5 Datalog Feature ==
391 391  
417 +==== (% style="color:#4472c4" %)**Alarm Flag& MOD:**(%%) ====
392 392  
393 -Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, S31x-LB will store the reading for future retrieving purposes.
394 394  
420 +**Example:**
395 395  
396 -=== 2.5.1 Ways to get datalog via LoRaWAN ===
422 +If payload & 0x01 = 0x01  **~-~->** This is an Alarm Message
397 397  
424 +If payload & 0x01 = 0x00  **~-~->** This is a normal uplink message, no alarm
398 398  
399 -Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayload28FPORT3D329"]], S31x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
400 400  
401 -* (((
402 -a) S31x-LB will do an ACK check for data records sending to make sure every data arrive server.
427 +
428 +==== ====
429 +
430 +
431 +== 2.4 Payload Decoder file ==
432 +
433 +
434 +(((
435 +In TTN, use can add a custom payload so it shows friendly. 
403 403  )))
404 -* (((
405 -b) S31x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB gets a ACK, S31x-LB will consider there is a network connection and resend all NONE-ACK messages.
437 +
438 +(((
439 +In the page **Applications ~-~-> Payload Formats ~-~-> Custom ~-~-> decoder** to add the decoder from:  [[https:~~/~~/github.com/dragino/dragino-end-node-decoder>>https://github.com/dragino/dragino-end-node-decoder]]
406 406  )))
407 407  
408 -Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
409 409  
410 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="图片-20220703111700-2.png" height="381" width="1119"]]
443 +== 2.5 Datalog Feature ==
411 411  
412 412  
446 +Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, D2x-LB will store the reading for future retrieving purposes.
447 +
448 +
449 +=== 2.5.1 Ways to get datalog via LoRaWAN ===
450 +
451 +
452 +Set [[PNACKMD=1>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H4.13AutoSendNone-ACKmessages]], D2x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,D2x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
453 +
454 +* a) D2x-LB will do an ACK check for data records sending to make sure every data arrive server.
455 +* b) D2x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but D2x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if D2x-LB gets a ACK, D2x-LB will consider there is a network connection and resend all NONE-ACK Message.
456 +
457 +Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
458 +
459 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220703111700-2.png?width=1119&height=381&rev=1.1||alt="image-20220703111700-2.png" height="381" width="1119"]]
460 +
413 413  === 2.5.2 Unix TimeStamp ===
414 414  
415 415  
416 -S31x-LB uses Unix TimeStamp format based on
464 +LHT65N uses Unix TimeStamp format based on
417 417  
418 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
466 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="image-20220523001219-11.png" height="97" width="627"]]
419 419  
420 420  User can get this time from link:  [[https:~~/~~/www.epochconverter.com/>>url:https://www.epochconverter.com/]] :
421 421  
422 422  Below is the converter example
423 423  
424 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="图片-20220523001219-12.png" height="298" width="720"]]
472 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-12.png?width=720&height=298&rev=1.1||alt="image-20220523001219-12.png" height="298" width="720"]]
425 425  
426 -
427 427  So, we can use AT+TIMESTAMP=1611889405 or downlink 3060137afd00 to set the current time 2021 – Jan ~-~- 29 Friday 03:03:25
428 428  
429 429  
... ... @@ -430,42 +430,34 @@
430 430  === 2.5.3 Set Device Time ===
431 431  
432 432  
433 -User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
480 +User need to set SYNCMOD=1 to enable sync time via MAC command.
434 434  
435 -Once S31x-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to S31x-LB. If S31x-LB fails to get the time from the server, S31x-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
482 +Once D2x-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to D2x-LB. If D2x-LB fails to get the time from the server, D2x-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
436 436  
437 -(% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
484 +**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
438 438  
439 439  
440 -=== 2.5.4 Datalog Uplink payload (FPORT~=3) ===
487 +=== 2.5.4 Datalog Uplink payload  （FPORT~=3） ===
441 441  
442 442  
443 -The Datalog uplinks will use below payload format.
490 +The Datalog poll reply uplink will use below payload format.
444 444  
445 445  **Retrieval data payload:**
446 446  
447 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:680px" %)
448 -|=(% style="width: 80px;background-color:#D9E2F3" %)(((
494 +(% style="width:858px" %)
495 +|=(% style="width: 103px;" %)(((
449 449  **Size(bytes)**
450 -)))|=(% style="width: 68px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 104px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 87px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 178px; background-color: rgb(217, 226, 243);" %)**1**|=(% style="width: 137px; background-color: rgb(217, 226, 243);" %)**4**
451 -|(% style="width:103px" %)**Value**|(% style="width:68px" %)(((
452 -ignore
453 -)))|(% style="width:104px" %)(((
454 -Temperature
455 -)))|(% style="width:87px" %)Humidity|(% style="width:178px" %)(((
456 -Poll message flag &
497 +)))|=(% style="width: 129px;" %)**2**|=(% style="width: 114px;" %)**2**|=(% style="width: 217px;" %)**2**|=(% style="width: 153px;" %)**1**|=(% style="width: 139px;" %)**4**
498 +|(% style="width:103px" %)**Value**|(% style="width:129px" %)(((
499 +[[Temp_Black>>||anchor="HTemperatureBlack:"]]
500 +)))|(% style="width:114px" %)[[Temp_White>>||anchor="HTemperatureWhite:"]]|(% style="width:217px" %)[[Temp_ Red or Temp _White>>||anchor="HTemperatureREDorTemperatureWhite:"]]|(% style="width:153px" %)Poll message flag & Ext|(% style="width:139px" %)[[Unix Time Stamp>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H2.6.2UnixTimeStamp]]
457 457  
458 -Alarm Flag&
502 +**Poll message flag & Ext:**
459 459  
460 -Digital Interrupt
461 -)))|(% style="width:137px" %)Unix Time Stamp
504 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20221006192726-1.png?width=754&height=112&rev=1.1||alt="image-20221006192726-1.png" height="112" width="754"]]
462 462  
463 -**Poll message flag & Alarm Flag & Digital Interrupt:**
506 +**No ACK Message**:  1: This message means this payload is fromn Uplink Message which doesn't get ACK from the server before ( for [[PNACKMD=1>>url:http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/#H4.13AutoSendNone-ACKmessages]] feature)
464 464  
465 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20221006192726-1.png?width=754&height=112&rev=1.1||alt="图片-20221006192726-1.png" height="112" width="754"]]
466 -
467 -**No ACK Message**:  1: This message means this payload is fromn Uplink Message which doesn't get ACK from the server before ( for **PNACKMD=1** feature)
468 -
469 469  **Poll Message Flag**: 1: This message is a poll message reply.
470 470  
471 471  * Poll Message Flag is set to 1.
... ... @@ -484,12 +484,11 @@
484 484  
485 485  If devise doesn't have any data in the polling time. Device will uplink 11 bytes of 0   
486 486  
487 -
488 488  **Example:**
489 489  
490 -If S31x-LB has below data inside Flash:
528 +If D2x-LB has below data inside Flash:
491 491  
492 -[[image:1682646494051-944.png]]
530 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523144455-1.png?width=735&height=335&rev=1.1||alt="image-20220523144455-1.png" height="335" width="735"]]
493 493  
494 494  If user sends below downlink command: 3160065F9760066DA705
495 495  
... ... @@ -497,72 +497,65 @@
497 497  
498 498   Stop time: 60066DA7= time 21/1/19 05:27:03
499 499  
538 +**LHT65N will uplink this payload.**
500 500  
501 -**S31x-LB will uplink this payload.**
540 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-13.png?width=727&height=421&rev=1.1||alt="image-20220523001219-13.png" height="421" width="727"]]
502 502  
503 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-13.png?width=727&height=421&rev=1.1||alt="图片-20220523001219-13.png" height="421" width="727"]]
504 -
505 -(((
506 506  __**7FFF089801464160065F97**__ **__7FFF__ __088E__ __014B__ __41__ __60066009__** 7FFF0885014E41600660667FFF0875015141600662BE7FFF086B015541600665167FFF08660155416006676E7FFF085F015A41600669C67FFF0857015D4160066C1E
507 -)))
508 508  
509 -(((
510 510  Where the first 11 bytes is for the first entry:
511 -)))
512 512  
513 -(((
514 514  7FFF089801464160065F97
515 -)))
516 516  
517 -(((
518 -**Ext sensor data**=0x7FFF/100=327.67
519 -)))
548 +Ext sensor data=0x7FFF/100=327.67
520 520  
521 -(((
522 -**Temp**=0x088E/100=22.00
523 -)))
550 +Temp=0x088E/100=22.00
524 524  
525 -(((
526 -**Hum**=0x014B/10=32.6
527 -)))
552 +Hum=0x014B/10=32.6
528 528  
529 -(((
530 -**poll message flag & Ext**=0x41,means reply data,Ext=1
531 -)))
554 +poll message flag & Ext=0x41,means reply data,Ext=1
532 532  
533 -(((
534 -**Unix time** is 0x60066009=1611030423s=21/1/19 04:27:03
535 -)))
556 +Unix time is 0x60066009=1611030423s=21/1/19 04:27:03
536 536  
537 537  
538 -(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的
559 +(% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||data-widget="image" draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="Click and drag to resize" %)​(% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||data-widget="image" draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||draggable="true" height="15" role="presentation" title="Click and drag to move" width="15"]](% aria-label="Data URI image image widget" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="Click and drag to resize" %)​
539 539  
540 540  == 2.6 Temperature Alarm Feature ==
541 541  
542 542  
543 -S31x-LB work flow with Alarm feature.
564 +D2x-LB work flow with Alarm feature.
544 544  
545 545  
546 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/image-20220623090437-1.png?rev=1.1||alt="图片-20220623090437-1.png"]]
567 +[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/image-20220623090437-1.png?rev=1.1||alt="image-20220623090437-1.png"]]
547 547  
548 548  
570 +
549 549  == 2.7 Frequency Plans ==
550 550  
551 551  
552 -The S31x-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
574 +The D2x-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
553 553  
554 554  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
555 555  
556 556  
557 -= 3. Configure S31x-LB =
579 +== 2.8 ​Firmware Change Log ==
558 558  
559 -== 3.1 Configure Methods ==
560 560  
582 +**Firmware download link:**
561 561  
562 -S31x-LB supports below configure method:
584 +[[https:~~/~~/www.dropbox.com/sh/gf1glloczbzz19h/AABbuYI4WY6VdAmpXo6o1V2Ka?dl=0>>url:https://www.dropbox.com/sh/gf1glloczbzz19h/AABbuYI4WY6VdAmpXo6o1V2Ka?dl=0]]
563 563  
586 +
587 +
588 += 3. Configure D2x-LB =
589 +
590 +== 3.1 Configure Methods: ==
591 +
592 +
593 +D2x-LB supports below configure method:
594 +
564 564  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
565 -* AT Command via UART Connection : See [[UART Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
596 +* AT Command via UART Connection : See [[FAQ>>||anchor="H7.FAQ"]].
566 566  * LoRaWAN Downlink.  Instruction for different platforms: See [[IoT LoRaWAN Server>>http://wiki.dragino.com/xwiki/bin/view/Main/]] section.
567 567  
568 568  == 3.2 General Commands ==
... ... @@ -578,10 +578,10 @@
578 578  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
579 579  
580 580  
581 -== 3.3 Commands special design for S31x-LB ==
612 +== 3.3 Commands special design for D2x-LB ==
582 582  
583 583  
584 -These commands only valid for S31x-LB, as below:
615 +These commands only valid for D2x-LB, as below:
585 585  
586 586  
587 587  === 3.3.1 Set Transmit Interval Time ===
... ... @@ -591,8 +591,8 @@
591 591  
592 592  (% style="color:blue" %)**AT Command: AT+TDC**
593 593  
594 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
595 -|=(% style="width: 156px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3" %)**Function**|=(% style="background-color:#D9E2F3" %)**Response**
625 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
626 +|=(% style="width: 156px;" %)**Command Example**|=(% style="width: 137px;" %)**Function**|=**Response**
596 596  |(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
597 597  30000
598 598  OK
... ... @@ -617,72 +617,74 @@
617 617  
618 618  Send a LoRaWAN downlink to ask device send Alarm settings.
619 619  
620 -(% style="color:blue" %)**Downlink Payload:  **(%%)0x26 01
651 +* (% style="color:#037691" %)**Downlink Payload:  **(%%)0x26 01
621 621  
622 622  Sensor will upload Device Status via FPORT=5. See payload section for detail.
623 623  
624 624  
625 -=== 3.3.3 Set Temperature Alarm Threshold ===
656 +=== 3.3.3 Set Alarm Thredhold ===
626 626  
627 627  
628 -* (% style="color:blue" %)**AT Command:**
659 +(% style="color:#4472c4" %)**1.  Set for All Probes:**
629 629  
630 -(% style="color:#037691" %)**AT+SHTEMP=min,max**
661 +(% style="color:#037691" %)**AT+18ALARM=min,max**
631 631  
632 -* When min=0, and max≠0, Alarm higher than max
633 -* When min≠0, and max=0, Alarm lower than min
634 -* When min≠0 and max≠0, Alarm higher than max or lower than min
663 +* When min=0, and max≠0, Alarm trigger when higher than max
664 +* When min≠0, and max=0, Alarm trigger when lower than min
665 +* When min≠0 and max≠0, Alarm trigger when higher than max or lower than min
635 635  
636 -Example:
667 +**Example:**
637 637  
638 - AT+SHTEMP=0,30   ~/~/ Alarm when temperature higher than 30.
669 + AT+18ALARM=-10,30  ~/~/ Alarm when < -10 or higher than 30.
639 639  
640 -* (% style="color:blue" %)**Downlink Payload:**
641 641  
642 -(% style="color:#037691" %)**0x(0C 01 00 1E)**  (%%) ~/~/ Set AT+SHTEMP=0,30
672 +* (% style="color:#037691" %)**Downlink Payload:**
643 643  
644 -(% style="color:red" %)**(note: 3^^rd^^ byte= 0x00 for low limit(not set), 4^^th^^ byte = 0x1E for high limit: 30)**
674 +0x(0B F6 1E)   ~/~/ Same as AT+18ALARM=-10,30
645 645  
676 +(note: 0x1E= 30, 0xF6 means: 0xF6-0x100 = -10)
646 646  
647 -=== 3.3.4 Set Humidity Alarm Threshold ===
648 648  
679 +(% style="color:#4472c4" %)**2.  Set for Separate Probe:**
649 649  
650 -* (% style="color:blue" %)**AT Command:**
681 +(% style="color:#037691" %)**AT+18ALARM=min,max,index**
651 651  
652 -(% style="color:#037691" %)**AT+SHHUM=min,max**
683 +Index:
653 653  
654 -* When min=0, and max≠0, Alarm higher than max
655 -* When min≠0, and max=0, Alarm lower than min
656 -* When min≠0 and max≠0, Alarm higher than max or lower than min
685 +* 1: Temperature_Red
686 +* 2: Temperature_White
687 +* 3: Temperature_Black
657 657  
658 -Example:
689 +**Example:**
659 659  
660 - AT+SHHUM=70,0  ~/~/ Alarm when humidity lower than 70%.
691 + AT+18ALARM=-10,30,1   ~/~/ Alarm when temperature_red < -10 or higher than 30.
661 661  
662 -* (% style="color:blue" %)**Downlink Payload:**
663 663  
664 -(% style="color:#037691" %)**0x(0C 02 46 00)**(%%)  ~/~/ Set AT+SHTHUM=70,0
694 +* (% style="color:#037691" %)**Downlink Payload:**
665 665  
666 -(% style="color:red" %)**(note: 3^^rd^^ byte= 0x46 for low limit (70%), 4^^th^^ byte = 0x00 for high limit (not set))**
696 +0x(0B F6 1E 01)   ~/~/ Same as AT+18ALARM=-10,30,1
667 667  
698 +(note: 0x1E= 30, 0xF6 means: 0xF6-0x100 = -10)
668 668  
669 -=== 3.3.5 Set Alarm Interval ===
670 670  
701 +=== 3.3.4 Set Alarm Interval ===
671 671  
703 +
672 672  The shortest time of two Alarm packet. (unit: min)
673 673  
674 -* (% style="color:blue" %)**AT Command:**
706 +* (% style="color:#037691" %)**AT Command:**
675 675  
676 -(% style="color:#037691" %)**AT+ATDC=30** (%%) ~/~/ The shortest interval of two Alarm packets is 30 minutes, Means is there is an alarm packet uplink, there won't be another one in the next 30 minutes.
708 +AT+ATDC=30  ~/~/ The shortest interval of two Alarm packets is 30 minutes, Means is there is an alarm packet uplink, there won't be another one in the next 30 minutes.
677 677  
678 -* (% style="color:blue" %)**Downlink Payload:**
679 679  
680 -(% style="color:#037691" %)**0x(0D 00 1E)**(%%)     **~-~--> ** Set AT+ATDC=0x 00 1E = 30 minutes
711 +* (% style="color:#037691" %)**Downlink Payload:**
681 681  
713 +0x(0D 00 1E)     **~-~-->** Set AT+ATDC=0x 00 1E = 30 minutes
682 682  
683 -=== 3.3.6 Get Alarm settings ===
684 684  
716 +=== 3.3.5 Get Alarm settings  （什么FPORT?） ===
685 685  
718 +
686 686  Send a LoRaWAN downlink to ask device send Alarm settings.
687 687  
688 688  * (% style="color:#037691" %)**Downlink Payload:  **(%%)0x0E 01
... ... @@ -696,17 +696,15 @@
696 696  
697 697  * Alarm & MOD bit is 0x7C, 0x7C >> 2 = 0x31: Means this message is the Alarm settings message.
698 698  
699 -=== 3.3.7 Set Interrupt Mode ===
732 +=== 3.3.6 Set Interrupt Mode ===
700 700  
701 701  
702 -Feature, Set Interrupt mode for PA8 of pin.
735 +Feature, Set Interrupt mode for GPIO_EXIT.
703 703  
704 -When AT+INTMOD=0 is set, PA8 is used as a digital input port.
705 -
706 706  (% style="color:blue" %)**AT Command: AT+INTMOD**
707 707  
708 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
709 -|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
739 +(% border="1" cellspacing="4" style="background-color:#f7faff; color:black; width:510px" %)
740 +|=(% style="width: 154px;" %)**Command Example**|=(% style="width: 196px;" %)**Function**|=(% style="width: 157px;" %)**Response**
710 710  |(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
711 711  0
712 712  OK
... ... @@ -729,68 +729,44 @@
729 729  * Example 1: Downlink Payload: 06000000  ~/~/  Turn off interrupt mode
730 730  * Example 2: Downlink Payload: 06000003  ~/~/  Set the interrupt mode to rising edge trigger
731 731  
732 -=== 3.3.8 Set Power Output Duration ===
763 += 4. Battery & Power Consumption =
733 733  
734 734  
735 -Control the output duration 5V . Before each sampling, device will
766 +D2x-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
736 736  
737 -~1. first enable the power output to external sensor,
768 +[[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
738 738  
739 -2. keep it on as per duration, read sensor value and construct uplink payload
740 740  
741 -3. final, close the power output.
771 += 5. OTA firmware update =
742 742  
743 -(% style="color:blue" %)**AT Command: AT+5VT**
744 744  
745 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
746 -|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
747 -|(% style="width:154px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:157px" %)0 (default)
748 -OK
749 -|(% style="width:154px" %)AT+5VT=500|(% style="width:196px" %)Close after a delay of 1000 milliseconds.|(% style="width:157px" %)OK
774 +Please see this link for how to do OTA firmware update: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
750 750  
751 -(% style="color:blue" %)**Downlink Command: 0x07**
752 752  
753 -Format: Command Code (0x07) followed by 2 bytes.
777 += 6. FAQ =
754 754  
755 -The first and second bytes are the time to turn on.
779 +== 6.1 How to use AT Command via UART to access device? ==
756 756  
757 -* Example 1: Downlink Payload: 070000  **~-~-->**  AT+5VT=0
758 -* Example 2: Downlink Payload: 0701F4  **~-~-->**  AT+5VT=500
759 759  
760 -= 4. Battery & Power Consumption =
782 +See: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]
761 761  
762 762  
763 -S31x-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
785 +== 6.2 How to update firmware via UART port? ==
764 764  
765 -[[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
766 766  
788 +See: [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]
767 767  
768 -= 5. OTA Firmware update =
769 769  
791 +== 6.3 How to change the LoRa Frequency Bands/Region? ==
770 770  
771 -(% class="wikigeneratedid" %)
772 -User can change firmware S31x-LB to:
773 773  
774 -* Change Frequency band/ region.
775 -* Update with new features.
776 -* Fix bugs.
794 +Each LoRaWAN frequency bands has different firmware. User can update the device's firmware to the corresponding frequency band to change region.
777 777  
778 -Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/kwqv57tp6pejias/AAAopYMATh1GM6fZ-VRCLrpDa?dl=0]]**
779 779  
780 -
781 -Methods to Update Firmware:
782 -
783 -* (Recommanded way) OTA firmware update via wireless:   [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
784 -* Update through UART TTL interface. **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
785 -
786 -= 6. FAQ =
787 -
788 -
789 -
790 790  = 7. Order Info =
791 791  
792 792  
793 -Part Number: (% style="color:blue" %)**S31-LB-XX  / S31B-LB-XX**
800 +Part Number: (% style="color:blue" %)**D20-LB-XX  / D22-LB-XX / D23-LB-XX**
794 794  
795 795  (% style="color:red" %)**XX**(%%): The default frequency band
796 796  
... ... @@ -815,7 +815,7 @@
815 815  
816 816  (% style="color:#037691" %)**Package Includes**:
817 817  
818 -* S31x-LB LoRaWAN Temperature & Humidity Sensor
825 +* D2x-LB LoRaWAN Temperature Sensor
819 819  
820 820  (% style="color:#037691" %)**Dimension and weight**:
821 821  
... ... @@ -832,4 +832,4 @@
832 832  
833 833  * Support is provided Monday to Friday, from 09:00 to 18:00 GMT+8. Due to different timezones we cannot offer live support. However, your questions will be answered as soon as possible in the before-mentioned schedule.
834 834  
835 -* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[Support@dragino.cc>>mailto:Support@dragino.cc]].
842 +* Provide as much information as possible regarding your enquiry (product models, accurately describe your problem and steps to replicate it etc) and send a mail to [[support@dragino.com>>url:http://../../../../../../D:%5C%E5%B8%82%E5%9C%BA%E8%B5%84%E6%96%99%5C%E8%AF%B4%E6%98%8E%E4%B9%A6%5CLoRa%5CLT%E7%B3%BB%E5%88%97%5Csupport@dragino.com]]
1682646494051-944.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -206.9 KB
Content
S31-B.jpg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ellie
Size
... ... @@ -1,1 +1,0 @@
1 -28.3 KB
Content
S31.jpg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ellie
Size
... ... @@ -1,1 +1,0 @@
1 -58.7 KB
Content
S31B.jpg
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Ellie
Size
... ... @@ -1,1 +1,0 @@
1 -40.5 KB
Content
image-20230421162630-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -23.5 KB
Content
image-20230421171614-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -34.8 KB
Content
image-20230426084152-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -190.0 KB
Content
image-20230523174230-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Saxer
Size
... ... @@ -1,1 +1,0 @@
1 -605.9 KB
Content