Skip to Content
Last modified by Mengting Qiu on 2025/08/14 17:09
From version 45.2
edited by Saxer Lin
on 2023/05/24 08:56
Change comment: There is no comment for this version
To version 73.4
edited by Xiaoling
on 2024/01/04 16:48
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -S31-LB / S31B-LB LoRaWAN Outdoor Temperature & Humidity Sensor User Manual
1 +S31/S31B-LB/LS -- LoRaWAN Outdoor Temperature & Humidity Sensor User Manual
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Saxer
1 +XWiki.Xiaoling
Content
... ... @@ -1,9 +1,14 @@
1 + (% style="display:none" %) (%%) (% style="display:none" %) (%%) (% style="display:none" %)
2 +
1 1  (% style="text-align:center" %)
2 -[[image:S31-B.jpg]]
4 +[[image:image-20240104162316-6.png]]
3 3  
4 4  
5 5  
6 6  
9 +
10 +
11 +
7 7  **Table of Contents：**
8 8  
9 9  {{toc/}}
... ... @@ -15,22 +15,22 @@
15 15  
16 16  = 1. Introduction =
17 17  
18 -== 1.1 What is S31x-LB LoRaWAN Temperature & Humidity Sensor ==
23 +== 1.1 What is S31x-LB/LS LoRaWAN Temperature & Humidity Sensor ==
19 19  
20 20  
21 -The Dragino S31x-LB is a (% style="color:blue" %)**LoRaWAN Temperature and Humidity Sensor**(%%) for Internet of Things solution. It is used to measure the (% style="color:blue" %)**surrounding environment temperature and relative air humidity precisely**(%%), and then upload to IoT server via LoRaWAN wireless protocol.
26 +The Dragino S31x-LB/LS is a (% style="color:blue" %)**LoRaWAN Temperature and Humidity Sensor**(%%) for Internet of Things solution. It is used to measure the (% style="color:blue" %)**surrounding environment temperature and relative air humidity precisely**(%%), and then upload to IoT server via LoRaWAN wireless protocol.
22 22  
23 -The temperature & humidity sensor used in S31x-LB is SHT31, which is fully calibrated, linearized, and temperature compensated digital output from Sensirion, it provides a strong reliability and long-term stability. The SHT31 is fixed in a (% style="color:blue" %)**waterproof anti-condensation casing**(%%) for long term use.
28 +The temperature & humidity sensor used in S31x-LB/LS is SHT31, which is fully calibrated, linearized, and temperature compensated digital output from Sensirion, it provides a strong reliability and long-term stability. The SHT31 is fixed in a (% style="color:blue" %)**waterproof anti-condensation casing**(%%) for long term use.
24 24  
25 -The LoRa wireless technology used in S31x-LB allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
30 +The LoRa wireless technology used in S31x-LB/LS allows device to send data and reach extremely long ranges at low data-rates. It provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption.
26 26  
27 -S31x-LB supports (% style="color:blue" %)**Temperature & Humdity alarm feature**(%%), user can set temperature alarm for instant notice. S31x-LB supports Datalog feature, it can save the data when there is no LoRaWAN network and uplink when network recover.
32 +S31x-LB/LS supports (% style="color:blue" %)**Temperature & Humdity alarm feature**(%%), user can set temperature alarm for instant notice. S31x-LB/LS supports Datalog feature, it can save the data when there is no LoRaWAN network and uplink when network recover.
28 28  
29 -S31x-LB (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
34 +S31x-LB/LS (% style="color:blue" %)**supports BLE configure**(%%) and (% style="color:blue" %)**wireless OTA update**(%%) which make user easy to use.
30 30  
31 -S31x-LB is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%), it is designed for long term use up to 5 years.
36 +S31x-LB/LS is powered by (% style="color:blue" %)**8500mAh Li-SOCI2 battery**(%%) or (% style="color:blue" %)**solar powered + li-on battery**(%%) it is designed for long term use up to 5 years.
32 32  
33 -Each S31x-LB is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
38 +Each S31x-LB/LS is pre-load with a set of unique keys for LoRaWAN registrations, register these keys to local LoRaWAN server and it will auto connect after power on.
34 34  
35 35  
36 36  == 1.2 ​Features ==
... ... @@ -39,7 +39,7 @@
39 39  * LoRaWAN 1.0.3 Class A
40 40  * Ultra-low power consumption
41 41  * External 3 meters SHT31 probe (For S31-LB)
42 -* Measure range -55°C ~~ 125°C
47 +* Measure range -40°C ~~ 80°C
43 43  * Temperature & Humidity alarm
44 44  * Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865
45 45  * Support Bluetooth v5.1 and LoRaWAN remote configure
... ... @@ -46,7 +46,8 @@
46 46  * Support wireless OTA update firmware
47 47  * Uplink on periodically
48 48  * Downlink to change configure
49 -* 8500mAh Battery for long term use
54 +* 88500mAh Li/SOCl2 Battery (S31/S31B-LB)
55 +* Solar panel + 3000mAh Li-on battery (S31/S31B-LS)
50 50  
51 51  == 1.3 Specification ==
52 52  
... ... @@ -53,7 +53,7 @@
53 53  
54 54  (% style="color:#037691" %)**Common DC Characteristics:**
55 55  
56 -* Supply Voltage: built in 8500mAh Li-SOCI2 battery , 2.5v ~~ 3.6v
62 +* Supply Voltage: Built-in Battery , 2.5v ~~ 3.6v
57 57  * Operating Temperature: -40 ~~ 85°C
58 58  
59 59  (% style="color:#037691" %)**Temperature Sensor:**
... ... @@ -120,7 +120,7 @@
120 120  == 1.6 BLE connection ==
121 121  
122 122  
123 -S31x-LB support BLE remote configure.
129 +S31x-LB/LS support BLE remote configure.
124 124  
125 125  
126 126  BLE can be used to configure the parameter of sensor or see the console output from sensor. BLE will be only activate on below case:
... ... @@ -134,17 +134,17 @@
134 134  
135 135  == 1.7 Pin Definitions ==
136 136  
137 -[[image:image-20230523174230-1.png]]
143 +[[image:http://8.211.40.43/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/SN50v3-LB/WebHome/image-20230610163213-1.png?width=699&height=404&rev=1.1||alt="image-20230610163213-1.png"]]
138 138  
139 139  
140 140  == 1.8 Hardware Variant ==
141 141  
142 142  
143 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
144 -|=(% style="width: 102px;background-color:#D9E2F3;color:#0070C0" %)Model|=(% style="width: 190px;background-color:#D9E2F3;color:#0070C0" %)Photo|=(% style="width: 218px;background-color:#D9E2F3;color:#0070C0" %)Probe Info
149 +(% border="1" cellspacing="5" style="width:461.818px" %)
150 +|=(% style="width: 102px;background-color:#D9E2F3;color:#0070C0" %)Model|=(% style="width: 182px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)Photo|=(% style="width: 176px; background-color: rgb(217, 226, 243); color: rgb(0, 112, 192);" %)Probe Info
145 145  |(% style="width:102px" %)(((
146 146  S31-LB
147 -)))|(% style="width:190px" %)[[image:S31.jpg]]|(% style="width:297px" %)(((
153 +)))|(% style="width:182px" %)[[image:image-20230527093214-2.jpeg]]|(% style="width:176px" %)(((
148 148  1 x SHT31 Probe
149 149  
150 150  Cable Length : 2 meters
... ... @@ -153,7 +153,7 @@
153 153  )))
154 154  |(% style="width:102px" %)(((
155 155  S31B-LB
156 -)))|(% style="width:190px" %)[[image:S31B.jpg]]|(% style="width:297px" %)(((
162 +)))|(% style="width:182px" %)[[image:image-20230527093155-1.jpeg]]|(% style="width:176px" %)(((
157 157  1 x SHT31 Probe
158 158  
159 159  Installed in device.
... ... @@ -175,12 +175,12 @@
175 175  [[image:Main.User Manual for LoRaWAN End Nodes.D20-LBD22-LBD23-LB_LoRaWAN_Temperature_Sensor_User_Manual.WebHome@1675143909447-639.png]]
176 176  
177 177  
178 -= 2. Configure S31x-LB to connect to LoRaWAN network =
184 += 2. Configure S31x-LB/LS to connect to LoRaWAN network =
179 179  
180 180  == 2.1 How it works ==
181 181  
182 182  
183 -The S31x-LB is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the S31x-LB. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
189 +The S31x-LB/LS is configured as (% style="color:#037691" %)**LoRaWAN OTAA Class A**(%%) mode by default. It has OTAA keys to join LoRaWAN network. To connect a local LoRaWAN network, you need to input the OTAA keys in the LoRaWAN IoT server and press the button to activate the S31x-LB/LS. It will automatically join the network via OTAA and start to send the sensor value. The default uplink interval is 20 minutes.
184 184  
185 185  
186 186  == 2.2 ​Quick guide to connect to LoRaWAN server (OTAA) ==
... ... @@ -191,9 +191,9 @@
191 191  The LPS8V2 is already set to connected to [[TTN network >>url:https://console.cloud.thethings.network/]], so what we need to now is configure the TTN server.
192 192  
193 193  
194 -(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from S31x-LB.
200 +(% style="color:blue" %)**Step 1:**(%%) Create a device in TTN with the OTAA keys from S31x-LB/LS.
195 195  
196 -Each S31x-LB is shipped with a sticker with the default device EUI as below:
202 +Each S31x-LB/LS is shipped with a sticker with the default device EUI as below:
197 197  
198 198  [[image:image-20230426084152-1.png||alt="图片-20230426084152-1.png" height="233" width="502"]]
199 199  
... ... @@ -222,10 +222,10 @@
222 222  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-S31-S31B%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20User%20Manual/WebHome/image-20220611161308-6.png?width=744&height=485&rev=1.1||alt="图片-20220611161308-6.png"]]
223 223  
224 224  
225 -(% style="color:blue" %)**Step 2:**(%%) Activate on S31x-LB
231 +(% style="color:blue" %)**Step 2:**(%%) Activate on S31x-LB/LS
226 226  
227 227  
228 -Press the button for 5 seconds to activate the S31x-LB.
234 +Press the button for 5 seconds to activate the S31x-LB/LS.
229 229  
230 230  (% style="color:green" %)**Green led**(%%) will fast blink 5 times, device will enter (% style="color:blue" %)**OTA mode**(%%) for 3 seconds. And then start to JOIN LoRaWAN network. (% style="color:green" %)**Green led**(%%) will solidly turn on for 5 seconds after joined in network.
231 231  
... ... @@ -237,7 +237,7 @@
237 237  === 2.3.1 Device Status, FPORT~=5 ===
238 238  
239 239  
240 -Users can use the downlink command(**0x26 01**) to ask S31x-LB to send device configure detail, include device configure status. S31x-LB will uplink a payload via FPort=5 to server.
246 +Users can use the downlink command(**0x26 01**) to ask S31x-LB/LS to send device configure detail, include device configure status. S31x-LB/LS will uplink a payload via FPort=5 to server.
241 241  
242 242  The Payload format is as below.
243 243  
... ... @@ -249,42 +249,42 @@
249 249  
250 250  Example parse in TTNv3
251 251  
252 -[[image:image-20230421171614-1.png||alt="图片-20230421171614-1.png"]]
258 +[[image:image-20230524144422-1.png||height="174" width="1080"]]
253 253  
254 254  
255 -(% style="color:#037691" %)**Sensor Model**(%%): For S31x-LB, this value is 0x0A
261 +(% style="color:#037691" %)**Sensor Model**(%%): For S31x-LB/LS, this value is 0x0A
256 256  
257 257  (% style="color:#037691" %)**Firmware Version**(%%): 0x0100, Means: v1.0.0 version
258 258  
259 259  (% style="color:#037691" %)**Frequency Band**:
260 260  
261 -*0x01: EU868
267 +0x01: EU868
262 262  
263 -*0x02: US915
269 +0x02: US915
264 264  
265 -*0x03: IN865
271 +0x03: IN865
266 266  
267 -*0x04: AU915
273 +0x04: AU915
268 268  
269 -*0x05: KZ865
275 +0x05: KZ865
270 270  
271 -*0x06: RU864
277 +0x06: RU864
272 272  
273 -*0x07: AS923
279 +0x07: AS923
274 274  
275 -*0x08: AS923-1
281 +0x08: AS923-1
276 276  
277 -*0x09: AS923-2
283 +0x09: AS923-2
278 278  
279 -*0x0a: AS923-3
285 +0x0a: AS923-3
280 280  
281 -*0x0b: CN470
287 +0x0b: CN470
282 282  
283 -*0x0c: EU433
289 +0x0c: EU433
284 284  
285 -*0x0d: KR920
291 +0x0d: KR920
286 286  
287 -*0x0e: MA869
293 +0x0e: MA869
288 288  
289 289  
290 290  (% style="color:#037691" %)**Sub-Band**:
... ... @@ -311,23 +311,26 @@
311 311  Sensor Data is uplink via FPORT=2
312 312  
313 313  (% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
314 -|=(% style="width: 90px;background-color:#D9E2F3" %)(((
320 +|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)(((
315 315  **Size(bytes)**
316 -)))|=(% style="width: 80px;background-color:#D9E2F3" %)2|=(% style="width: 90px;background-color:#D9E2F3" %)4|=(% style="width:80px;background-color:#D9E2F3" %)1|=(% style="width: 80px;background-color:#D9E2F3" %)**2**|=(% style="width: 80px;background-color:#D9E2F3" %)2
317 -|(% style="width:99px" %)**Value**|(% style="width:69px" %)(((
318 -[[Battery>>||anchor="HBattery"]]
322 +)))|=(% style="width: 40px;background-color:#D9E2F3;color:#0070C0" %)2|=(% style="width: 90px;background-color:#D9E2F3;color:#0070C0" %)4|=(% style="width: 150px; background-color: #D9E2F3;color:#0070C0" %)1|=(% style="width: 80px; background-color: #D9E2F3;color:#0070C0" %)**2**|=(% style="width: 80px; background-color: #D9E2F3;color:#0070C0" %)2
323 +|(% style="width:99px" %)Value|(% style="width:69px" %)(((
324 +Battery
319 319  )))|(% style="width:130px" %)(((
320 -[[Unix TimeStamp>>||anchor="H2.5.2UnixTimeStamp"]]
321 -)))|(% style="width:91px" %)(((
322 -[[Alarm Flag>>||anchor="HAlarmFlag26MOD"]]
323 -)))|(% style="width:103px" %)(((
324 -[[Temperature>>||anchor="HTemperature"]]
325 -)))|(% style="width:80px" %)(((
326 -[[Humidity>>||anchor="HHumidity"]]
326 +Unix TimeStamp
327 +)))|(% style="width:194px" %)(((
328 +Alarm Flag & MOD& Level of PA8
329 +)))|(% style="width:106px" %)(((
330 +Temperature
331 +)))|(% style="width:97px" %)(((
332 +Humidity
327 327  )))
328 328  
329 -==== (% style="color:#4472c4" %)**2.3.2.1 Battery**(%%) ====
335 +[[image:image-20230524144456-2.png||height="180" width="1142"]]
330 330  
337 +
338 +==== (% style="color:#4472c4" %)**Battery**(%%) ====
339 +
331 331  Sensor Battery Level.
332 332  
333 333  Ex1: 0x0B45 = 2885mV
... ... @@ -335,9 +335,8 @@
335 335  Ex2: 0x0B49 = 2889mV
336 336  
337 337  
347 +==== (% style="color:#4472c4" %)**Temperature**(%%) ====
338 338  
339 -==== (% style="color:#4472c4" %)**2.3.2.2 Temperature**(%%) ====
340 -
341 341  **Example**:
342 342  
343 343  If payload is: 0105H:  (0105 & 8000 == 0), temp = 0105H /10 = 26.1 degree
... ... @@ -344,26 +344,30 @@
344 344  
345 345  If payload is: FF3FH :  (FF3F & 8000 == 1) , temp = (FF3FH - 65536)/10 = -19.3 degrees.
346 346  
347 -（FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative）
355 +(FF3F & 8000：Judge whether the highest bit is 1, when the highest bit is 1, it is negative)
348 348  
349 349  
350 -==== (% style="color:#4472c4" %)**2.3.2.3 Humidity**(%%) ====
358 +==== (% style="color:#4472c4" %)**Humidity**(%%) ====
351 351  
352 352  
353 353  Read:0x(0197)=412    Value:  412 / 10=41.2, So 41.2%
354 354  
355 355  
356 -==== (% style="color:#4472c4" %)**2.3.2.4 Alarm Flag& MOD**(%%) ====
364 +==== (% style="color:#4472c4" %)**Alarm Flag & MOD & Level of PA8**(%%) ====
357 357  
358 358  
359 359  **Example:**
360 360  
361 -If payload & 0x01 = 0x01  **~-~->** This is an Alarm Message
369 +If payload & 0x01 = 0x01  **~-~->** This is an Alarm Message.It means that the temperature and humidity exceed the alarm value or trigger an interrupt.
362 362  
363 -If payload & 0x01 = 0x00  **~-~->** This is a normal uplink message, no alarm
371 +If payload & 0x01 = 0x00  **~-~->** This is a normal uplink message, no alarm.
364 364  
365 -If payload >> 2 = 0x00  **~-~->**  means MOD=1, This is a sampling uplink message
373 +If payload & 0x80>>7 = 0x01  **~-~->** The PA8 is low level.
366 366  
375 +If payload & 0x80>>7 =0x00  **~-~->** The PA8 is high level.
376 +
377 +If payload >> 2 = 0x00  **~-~->**  means MOD=1, This is a sampling uplink message.
378 +
367 367  If payload >> 2 = 0x31  **~-~->**  means MOD=31, this message is a reply message for polling, this message contains the alarm settings. see [[this link>>path:#HPolltheAlarmsettings:]] for detail. 
368 368  
369 369  
... ... @@ -380,19 +380,19 @@
380 380  == 2.5 Datalog Feature ==
381 381  
382 382  
383 -Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, S31x-LB will store the reading for future retrieving purposes.
395 +Datalog Feature is to ensure IoT Server can get all sampling data from Sensor even if the LoRaWAN network is down. For each sampling, S31x-LB/LS will store the reading for future retrieving purposes.
384 384  
385 385  
386 386  === 2.5.1 Ways to get datalog via LoRaWAN ===
387 387  
388 388  
389 -Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayload28FPORT3D329"]], S31x-LB will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
401 +Set [[PNACKMD=1>>||anchor="H2.5.4DatalogUplinkpayload28FPORT3D329"]], S31x-LB/LS will wait for ACK for every uplink, when there is no LoRaWAN network,S31x-LB/LS will mark these records with non-ack messages and store the sensor data, and it will send all messages (10s interval) after the network recovery.
390 390  
391 391  * (((
392 -a) S31x-LB will do an ACK check for data records sending to make sure every data arrive server.
404 +a) S31x-LB/LS will do an ACK check for data records sending to make sure every data arrive server.
393 393  )))
394 394  * (((
395 -b) S31x-LB will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB gets a ACK, S31x-LB will consider there is a network connection and resend all NONE-ACK messages.
407 +b) S31x-LB/LS will send data in **CONFIRMED Mode** when PNACKMD=1, but S31x-LB/LS won't re-transmit the packet if it doesn't get ACK, it will just mark it as a NONE-ACK message. In a future uplink if S31x-LB/LS gets a ACK, S31x-LB/LS will consider there is a network connection and resend all NONE-ACK messages.
396 396  )))
397 397  
398 398  Below is the typical case for the auto-update datalog feature (Set PNACKMD=1)
... ... @@ -403,7 +403,7 @@
403 403  === 2.5.2 Unix TimeStamp ===
404 404  
405 405  
406 -S31x-LB uses Unix TimeStamp format based on
418 +S31x-LB/LS uses Unix TimeStamp format based on
407 407  
408 408  [[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-11.png?width=627&height=97&rev=1.1||alt="图片-20220523001219-11.png" height="97" width="627"]]
409 409  
... ... @@ -422,7 +422,7 @@
422 422  
423 423  User need to set (% style="color:blue" %)**SYNCMOD=1**(%%) to enable sync time via MAC command.
424 424  
425 -Once S31x-LB Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to S31x-LB. If S31x-LB fails to get the time from the server, S31x-LB will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
437 +Once S31x-LB/LS Joined LoRaWAN network, it will send the MAC command (DeviceTimeReq) and the server will reply with (DeviceTimeAns) to send the current time to S31x-LB/LS. If S31x-LB/LS fails to get the time from the server, S31x-LB/LS will use the internal time and wait for next time request (AT+SYNCTDC to set the time request period, default is 10 days).
426 426  
427 427  (% style="color:red" %)**Note: LoRaWAN Server need to support LoRaWAN v1.0.3(MAC v1.0.3) or higher to support this MAC command feature, Chirpstack,TTN V3 v3 and loriot support but TTN V3 v2 doesn't support. If server doesn't support this command, it will through away uplink packet with this command, so user will lose the packet with time request for TTN V3 v2 if SYNCMOD=1.**
428 428  
... ... @@ -434,18 +434,31 @@
434 434  
435 435  **Retrieval data payload:**
436 436  
437 -(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:510px" %)
438 -|=(% style="width: 80px;background-color:#D9E2F3" %)(((
449 +(% border="1" cellspacing="5" style="background-color:#f2f2f2; width:500px" %)
450 +|=(% style="width: 60px;background-color:#D9E2F3;color:#0070C0" %)(((
439 439  **Size(bytes)**
440 -)))|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 60px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 120px; background-color: rgb(217, 226, 243);" %)**2**|=(% style="width: 103px; background-color: rgb(217, 226, 243);" %)**1**|=(% style="width: 85px; background-color: rgb(217, 226, 243);" %)**4**
441 -|(% style="width:103px" %)**Value**|(% style="width:54px" %)(((
442 -Temp_Black
443 -)))|(% style="width:51px" %)Temp_White|(% style="width:89px" %)Temp_ Red or Temp _White|(% style="width:103px" %)Poll message flag & Ext|(% style="width:54px" %)[[Unix Time Stamp>>||anchor="H2.5.2UnixTimeStamp"]]
452 +)))|=(% style="width: 40px; background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 55px; background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 65px; background-color:#D9E2F3;color:#0070C0" %)**2**|=(% style="width: 180px; background-color:#D9E2F3;color:#0070C0" %)**1**|=(% style="width: 100px; background-color:#D9E2F3;color:#0070C0" %)**4**
453 +|(% style="width:103px" %)Value|(% style="width:68px" %)(((
454 +ignore
455 +)))|(% style="width:104px" %)(((
456 +(((
457 +Humidity
458 +)))
444 444  
445 -**Poll message flag & Ext:**
460 +(((
461 +
462 +)))
463 +)))|(% style="width:87px" %)(((
464 +Temperature
465 +)))|(% style="width:178px" %)(((
466 +Poll message flag & Alarm Flag& Level of PA8
467 +)))|(% style="width:137px" %)Unix Time Stamp
446 446  
447 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20221006192726-1.png?width=754&height=112&rev=1.1||alt="图片-20221006192726-1.png" height="112" width="754"]]
469 +**Poll message flag & Alarm Flag & Level of PA8:**
448 448  
471 +[[image:image-20230524114302-1.png||height="115" width="736"]]
472 +
473 +
449 449  **No ACK Message**:  1: This message means this payload is fromn Uplink Message which doesn't get ACK from the server before ( for **PNACKMD=1** feature)
450 450  
451 451  **Poll Message Flag**: 1: This message is a poll message reply.
... ... @@ -466,26 +466,26 @@
466 466  
467 467  If devise doesn't have any data in the polling time. Device will uplink 11 bytes of 0   
468 468  
469 -
470 470  **Example:**
471 471  
472 -If S31x-LB has below data inside Flash:
496 +If S31x-LB/LS has below data inside Flash:
473 473  
474 -[[image:1682646494051-944.png]]
498 +[[image:image-20230524114654-2.png]]
475 475  
476 -If user sends below downlink command: 3160065F9760066DA705
477 477  
478 -Where : Start time: 60065F97 = time 21/1/19 04:27:03
501 +If user sends below downlink command: 31646D84E1646D856C05
479 479  
480 - Stop time: 60066DA7= time 21/1/19 05:27:03
503 +Where : Start time: 646D84E1 = time 23/5/24 03:30:41
481 481  
505 + Stop time: 646D856C= time 23/5/24 03:33:00
482 482  
483 -**S31x-LB will uplink this payload.**
484 484  
485 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LHT65N%20LoRaWAN%20Temperature%20%26%20Humidity%20Sensor%20Manual/WebHome/image-20220523001219-13.png?width=727&height=421&rev=1.1||alt="图片-20220523001219-13.png" height="421" width="727"]]
508 +**S31x-LB/LS will uplink this payload.**
486 486  
510 +[[image:image-20230524114826-3.png||height="448" width="1244"]]
511 +
487 487  (((
488 -__**7FFF089801464160065F97**__ **__7FFF__ __088E__ __014B__ __41__ __60066009__** 7FFF0885014E41600660667FFF0875015141600662BE7FFF086B015541600665167FFF08660155416006676E7FFF085F015A41600669C67FFF0857015D4160066C1E
513 +00 00 02 36 01 10 40 64 6D 84 E1 00 00 02 37 01 10 40 64 6D 84 F8 00 00 02 37 01 0F 40 64 6D 85 04 00 00 02 3A 01 0F 40 64 6D 85 18 00 00 02 3C 01 0F 40 64 6D 85 36 00 00 02 3D 01 0E 40 64 6D 85 3F 00 00 02 3F 01 0E 40 64 6D 85 60 00 00 02 40 01 0E 40 64 6D 85 6A
489 489  )))
490 490  
491 491  (((
... ... @@ -493,55 +493,58 @@
493 493  )))
494 494  
495 495  (((
496 -7FFF089801464160065F97
521 +00 00 02 36 01 10 40 64 6D 84 E1
497 497  )))
498 498  
499 499  (((
500 -**Ext sensor data**=0x7FFF/100=327.67
525 +**Hum**=0x0236/10=56.6
501 501  )))
502 502  
503 503  (((
504 -**Temp**=0x088E/100=22.00
529 +**Temp**=0x0110/10=27.2
505 505  )))
506 506  
507 507  (((
508 -**Hum**=0x014B/10=32.6
533 +**poll message flag & Alarm Flag & Level of PA8**=0x40,means reply data,sampling uplink message,the PA8 is low level.
509 509  )))
510 510  
511 511  (((
512 -**poll message flag & Ext**=0x41,means reply data,Ext=1
537 +**Unix time** is 0x646D84E1=1684899041s=23/5/24 03:30:41
513 513  )))
514 514  
515 -(((
516 -**Unix time** is 0x60066009=1611030423s=21/1/19 04:27:03
517 -)))
518 518  
519 -
520 520  (% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的(% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" data-widget="image" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220, 220, 220, 0.5); display:none" tabindex="-1" %)[[image:data:image/gif;base64,R0lGODlhAQABAPABAP///wAAACH5BAEKAAAALAAAAAABAAEAAAICRAEAOw==||alt="数据 URI 图片" draggable="true" height="15" role="presentation" title="单击并拖动以移动" width="15"]](% aria-label="数据 URI 图像图像小部件" contenteditable="false" role="region" style="background-image:url(http://wiki1.dragino.com/xwiki/webjars/wiki%3Axwiki/application-ckeditor-webjar/1.61/plugins/widget/images/handle.png); background:rgba(220,220,220,0.5); display:none" tabindex="-1" title="单击并拖动以调整大小" %)的
521 521  
522 522  == 2.6 Temperature Alarm Feature ==
523 523  
524 524  
525 -S31x-LB work flow with Alarm feature.
546 +S31x-LB/LS work flow with Alarm feature.
526 526  
527 527  
528 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/image-20220623090437-1.png?rev=1.1||alt="图片-20220623090437-1.png"]]
549 +[[image:image-20230524110125-3.png||height="768" width="1115"]]
529 529  
530 530  
552 +
531 531  == 2.7 Frequency Plans ==
532 532  
533 533  
534 -The S31x-LB uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
556 +The S31x-LB/LS uses OTAA mode and below frequency plans by default. If user want to use it with different frequency plan, please refer the AT command sets.
535 535  
536 536  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20Frequency%20Band/]]
537 537  
538 538  
539 -= 3. Configure S31x-LB =
561 +== 2.8 ​Firmware Change Log ==
540 540  
563 +
564 +**Firmware download link: **[[https:~~/~~/www.dropbox.com/sh/fis3g6nmhv0eokg/AAC6BcCZaX4BdqZkduUvZ3jIa?dl=0>>https://www.dropbox.com/sh/fis3g6nmhv0eokg/AAC6BcCZaX4BdqZkduUvZ3jIa?dl=0]]
565 +
566 +
567 += 3. Configure S31x-LB/LS =
568 +
541 541  == 3.1 Configure Methods ==
542 542  
543 543  
544 -S31x-LB supports below configure method:
572 +S31x-LB/LS supports below configure method:
545 545  
546 546  * AT Command via Bluetooth Connection (**Recommended**): [[BLE Configure Instruction>>http://wiki.dragino.com/xwiki/bin/view/Main/BLE%20Bluetooth%20Remote%20Configure/]].
547 547  * AT Command via UART Connection : See [[UART Connection>>http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H2.3UARTConnectionforSN50v3basemotherboard]].
... ... @@ -560,10 +560,10 @@
560 560  [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/>>http://wiki.dragino.com/xwiki/bin/view/Main/End%20Device%20AT%20Commands%20and%20Downlink%20Command/]]
561 561  
562 562  
563 -== 3.3 Commands special design for S31x-LB ==
591 +== 3.3 Commands special design for S31x-LB/LS ==
564 564  
565 565  
566 -These commands only valid for S31x-LB, as below:
594 +These commands only valid for S31x-LB/LS, as below:
567 567  
568 568  
569 569  === 3.3.1 Set Transmit Interval Time ===
... ... @@ -574,7 +574,7 @@
574 574  (% style="color:blue" %)**AT Command: AT+TDC**
575 575  
576 576  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
577 -|=(% style="width: 156px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3" %)**Function**|=(% style="background-color:#D9E2F3" %)**Response**
605 +|=(% style="width: 156px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 137px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="background-color:#D9E2F3;color:#0070C0" %)**Response**
578 578  |(% style="width:156px" %)AT+TDC=?|(% style="width:137px" %)Show current transmit Interval|(((
579 579  30000
580 580  OK
... ... @@ -671,9 +671,8 @@
671 671  
672 672  **Example:**
673 673  
674 -[[image:http://wiki.dragino.com/xwiki/bin/download/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/LSN50v2-D20-D22-D23%20LoRaWAN%20Temperature%20Sensor%20User%20Manual/WebHome/1655948182791-225.png?rev=1.1||alt="1655948182791-225.png"]]
702 +[[image:image-20230524110211-4.png]]
675 675  
676 -
677 677  **Explain:**
678 678  
679 679  * Alarm & MOD bit is 0x7C, 0x7C >> 2 = 0x31: Means this message is the Alarm settings message.
... ... @@ -683,10 +683,12 @@
683 683  
684 684  Feature, Set Interrupt mode for PA8 of pin.
685 685  
713 +When AT+INTMOD=0 is set, PA8 is used as a digital input port.
714 +
686 686  (% style="color:blue" %)**AT Command: AT+INTMOD**
687 687  
688 688  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
689 -|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
718 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
690 690  |(% style="width:154px" %)AT+INTMOD=?|(% style="width:196px" %)Show current interrupt mode|(% style="width:157px" %)(((
691 691  0
692 692  OK
... ... @@ -723,10 +723,10 @@
723 723  (% style="color:blue" %)**AT Command: AT+5VT**
724 724  
725 725  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
726 -|=(% style="width: 154px;background-color:#D9E2F3" %)**Command Example**|=(% style="width: 196px;background-color:#D9E2F3" %)**Function**|=(% style="width: 157px;background-color:#D9E2F3" %)**Response**
755 +|=(% style="width: 155px;background-color:#D9E2F3;color:#0070C0" %)**Command Example**|=(% style="width: 197px;background-color:#D9E2F3;color:#0070C0" %)**Function**|=(% style="width: 158px;background-color:#D9E2F3;color:#0070C0" %)**Response**
727 727  |(% style="width:154px" %)AT+5VT=?|(% style="width:196px" %)Show 5V open time.|(% style="width:157px" %)0 (default)
728 728  OK
729 -|(% style="width:154px" %)AT+5VT=500|(% style="width:196px" %)Close after a delay of 1000 milliseconds.|(% style="width:157px" %)OK
758 +|(% style="width:154px" %)AT+5VT=1000|(% style="width:196px" %)Close after a delay of 1000 milliseconds.|(% style="width:157px" %)OK
730 730  
731 731  (% style="color:blue" %)**Downlink Command: 0x07**
732 732  
... ... @@ -740,7 +740,7 @@
740 740  = 4. Battery & Power Consumption =
741 741  
742 742  
743 -S31x-LB use ER26500 + SPC1520 battery pack. See below link for detail information about the battery info and how to replace.
772 +S31x-LB use ER26500 + SPC1520 battery pack and S31x-LS use 3000mAh Recharable Battery with Solar Panel. See below link for detail information about the battery info and how to replace.
744 744  
745 745  [[**Battery Info & Power Consumption Analyze**>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20calculate%20the%20battery%20life%20of%20Dragino%20sensors%3F/]] .
746 746  
... ... @@ -749,19 +749,19 @@
749 749  
750 750  
751 751  (% class="wikigeneratedid" %)
752 -User can change firmware S31x-LB to:
781 +User can change firmware S31x-LB/LS to:
753 753  
754 754  * Change Frequency band/ region.
755 755  * Update with new features.
756 756  * Fix bugs.
757 757  
758 -Firmware and changelog can be downloaded from : **[[Firmware download link>>url:https://www.dropbox.com/sh/kwqv57tp6pejias/AAAopYMATh1GM6fZ-VRCLrpDa?dl=0]]**
787 +Firmware and changelog can be downloaded from : **[[Firmware download link>>https://www.dropbox.com/sh/fis3g6nmhv0eokg/AAC6BcCZaX4BdqZkduUvZ3jIa?dl=0]]**
759 759  
760 760  
761 761  Methods to Update Firmware:
762 762  
763 -* (Recommanded way) OTA firmware update via wireless:   [[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]
764 -* Update through UART TTL interface. **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
792 +* (Recommanded way) OTA firmware update via wireless : **[[http:~~/~~/wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/>>url:http://wiki.dragino.com/xwiki/bin/view/Main/Firmware%20OTA%20Update%20for%20Sensors/]]**
793 +* Update through UART TTL interface : **[[Instruction>>url:http://wiki.dragino.com/xwiki/bin/view/Main/UART%20Access%20for%20LoRa%20ST%20v4%20base%20model/#H1.LoRaSTv4baseHardware]]**.
765 765  
766 766  = 6. FAQ =
767 767  
... ... @@ -770,7 +770,7 @@
770 770  = 7. Order Info =
771 771  
772 772  
773 -Part Number: (% style="color:blue" %)**S31-LB-XX  / S31B-LB-XX**
802 +Part Number: (% style="color:blue" %)**S31-LB-XX  / S31B-LB-XX (%%) or (% style="color:blue" %)S31-LS-XX  / S31B-LS-XX**
774 774  
775 775  (% style="color:red" %)**XX**(%%): The default frequency band
776 776  
... ... @@ -795,7 +795,7 @@
795 795  
796 796  (% style="color:#037691" %)**Package Includes**:
797 797  
798 -* S31x-LB LoRaWAN Temperature & Humidity Sensor
827 +* S31x-LB or S31x-LS LoRaWAN Temperature & Humidity Sensor
799 799  
800 800  (% style="color:#037691" %)**Dimension and weight**:
801 801  
image-20230524105433-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +121.4 KB
Content
image-20230524105747-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +223.2 KB
Content
image-20230524110125-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +194.1 KB
Content
image-20230524110211-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +110.1 KB
Content
image-20230524114302-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +12.0 KB
Content
image-20230524114654-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +17.8 KB
Content
image-20230524114826-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +82.3 KB
Content
image-20230524144422-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +34.9 KB
Content
image-20230524144456-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +33.9 KB
Content
image-20230527093155-1.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +9.3 KB
Content
image-20230527093214-2.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +14.7 KB
Content
image-20230610163920-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Saxer
Size
... ... @@ -1,0 +1,1 @@
1 +695.8 KB
Content
image-20231127154814-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +107.6 KB
Content
image-20240104161116-1.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +396.1 KB
Content
image-20240104161535-2.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +347.3 KB
Content
image-20240104161736-3.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +141.0 KB
Content
image-20240104162020-4.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +453.8 KB
Content
image-20240104162104-5.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +239.6 KB
Content
image-20240104162316-6.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.Xiaoling
Size
... ... @@ -1,0 +1,1 @@
1 +284.3 KB
Content